FCC ID: UDX-600119010 LTE Gateway

Meraki MG41 and MG41E Installation Guide This document describes how to install and set up the MG41 LTE gateway. Additional reference documents are available online at: www.meraki.com/library/products. MG41-HW Overview The Meraki MG41-HW (model: MG41-HW, MG41E-HW) is an enterprise LTE gateway designed for distributed deployments that require remote administration. It is ideal for network administrators who demand both ease of deployment and a state-of-the-art feature set. This appliance provides the following new features:

Support for 2 LAN connections (1for 802.3at support) Wall screws and anchors for mounting drywall surface, either vertically or horizontally MG41-HW Operational Temperature: -40 o F to 140 o F (-40 o C to 60 o C) Package Contents In addition to the MG41-HW, the following are provided. The MG41-HW front panel Ports and Status Indicators The MG41-HW uses a single LED to inform the user of the device's status. Function LED Status Meaning Power Up/Boot Power is applied Solid Orange Connecting Rainbow Device in process of connecting to the Meraki Dashboard Connected Solid White Fully operational Upgrading During boot or no WAN link Flashing White LTE Enabled Purple LTE is on and connected The MG41-HW back panel Additional functions on the back panel are described below, from left to right. Internet ports Two ports provide connectivity to the WAN. Power input Designed for use only with the units power supply. Antenna ports Four RP-SMA ports for dipole antennas (antennas included) The MG41-HW input panel Restore button Insert a paper clip if a reset is required. A brief, momentary press: To delete a downloaded configuration and reboot. Press and hold for more than 10 sec: To force the unit into a full factory reset. DC Power Power the MG using the approved DC adapter (the DC power source must be used for indoor installations only) POE Power Power the MG using the approved POE adapter WAN SIM Slot Two SIM card slots supporting nano SIM format Mounting hardware The supplied wall screws and anchors allow you to mount the appliance on a drywall surface, either vertically or horizontally. The distance between the holes you drill should be For mounting on drywall, use a -in drill bit, then insert the plastic and screw assemblies. For mounting on wood or a similar surface, use only the screws. Allow the heads of the screws to stick out far enough to be inserted securely into the back 93 mm. of the appliance. Mount Option A:

Mount Option: B Attaching external antennas (MG41E only):

Mounting the device:

Outdoor Installation Hardware Power The installation for outdoor deployments of the MG41 and MG41E is the same procedure and uses the same mounting hardware as the indoor deployment. Powering the MG41 and MG41E in an outdoor deployment will require the use of the POE injector. For outdoor installation using the approved POE injector the installer must place the POE injector power source in an indoor location or in a location that can maintain a temperature range of -20-40 C IP67 Rating This device is IP67 rated. Connecting to the WAN All Meraki MG devices must have an IP address. This section describes how to configure your local area network before you deploy it. A local management web service, running on the appliance, is accessed through a browser running on a client PC. This web service is used for configuring and monitoring basic ISP/WAN connectivity. Setting up a static IP address To ensure that the client PC is redirected to the local web service in the following step, you must disable all other network services (e.g., Wi-Fi) on your client machine. Do the following to configure basic connectivity and other networking parameters:

1. Using a client machine such as a laptop, connect to one of the LAN ports of the MG. 2. Using a browser on the client machine, access the appliance's built-in web service by browsing to http://setup.meraki.com. (You do not have to be connected to the Internet to reach this address) 3. Click Uplink configuration under the Local status tab. 4. Choose Static for the IP Assignment option. 5. Enter the IP address, subnet mask, default gateway IP and DNS server information. Setting up a DHCP IP address By default all MG devices are configured to DHCP from upstream WAN / ISP servers. Simply plug one of the MG's WAN / Internet ports into your upstream circuit and wait a few minutes for the unit to negotiate a DHCP address. Icon When the WAN connection is fully enabled, the Internet 1 or 2 LED 1 will turn green. Additional settings Please note that all these settings below are accessible only via the local management console. Setting VLANs If your WAN uplink is on a trunk port, choose VLAN tagging > Use VLAN tagging and enter the appropriate value for VLAN ID for your network. Setting PPPoE PPPoE authentication may be required if you are connecting the MG to a DSL circuit. You need to know your authentication option and credentials (supplied by your ISP) in order to complete these steps. Choose Connection Type > PPPoE. Select your Authentication option. If you select Use authentication, enter appropriate values for Username and Password. Web proxy settings These settings take effect if the MG device has to fall back to using HTTP to contact the Cloud Controller. By default, web proxy is disabled. To enable web proxy, do the following:

Choose Web proxy > Yes. Enter values as appropriate for Hostname or IP and Port. If you require authentication, choose Authentication > Use authentication, and enter appropriate values for Username and Password. To apply all configuration settings to the appliance, be sure to click Save Settings at the bottom of the page. Configuring physical link settings To configure physical link settings on the Ethernet ports, click Local status > Ethernet configuration. You can enable half duplex, full duplex, and auto-negotiation, as well as set 10- or 100-Mbps data rates. Regulatory FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Party issuing Suppliers Declaration of Conformity Cisco Meraki 500 Terry A. Francois Blvd. San Francisco, CA 94158 USA compliance@meraki.com FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications no expressly approved by Cisco could void the users authority to operate this equipment. This Transmitter must not be co-located or operation in conjunction with any other antenna or transmitter. FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC Professional Installation Statement This equipment requires professional installation. Industry Canada Statement The MG41-HW, MG41E-HW comply with license-exempt RSSs of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Ce dispositif est conforme la norme RSS dIndustrie Canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:

(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. This radio transmitter has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Innovation, Sciences et Dveloppement conomique Canada a approuv l'utilisation de ce transmetteur radio avec les types d'antenne numrs ci-dessous, le gain maximal admissible tant indiqu. Les types d'antennes non inclus dans cette liste qui ont un gain suprieur au gain maximal indiqu pour tout type list sont strictement interdits pour une utilisation avec cet appareil. Industry Canada Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Dclaration dexposition aux radiations Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non con trl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Antenna Information Ant. Port Brand Model Name Type Connector Set Ant. Port Brand Model Name Type Connector 1 2 3 1 1, Primary #0 2 2, Primary #1 3 3, Secondary #0 4 4, Secondary #1 CISCO CISCO CISCO CISCO N/A N/A N/A N/A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-A CISCO MA-ANT-C1-A 3 3, Primary #1 Down CISCO MA-ANT-C1-A 4 4, Secondary #0 Down CISCO MA-ANT-C1-A Up Up Up Up 3 3, Primary #1 Down CISCO MA-ANT-C1-B 1 1, Primary #0 2 2, Secondary #1 4 4, Secondary #0 CISCO MA-ANT-C1-B CISCO MA-ANT-C1-B Down CISCO MA-ANT-C1-B Antenna Gain (dBi) Remark Note 1 Internal Antenna Gain (dBi) Remark Note 1 External External PIFA PIFA PIFA PIFA Dipole Dipole Dipole Dipole Panel Panel Panel Panel I-PEX I-PEX I-PEX I-PEX Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Note1:

Set Band Port Antenna Gain (dBi) Remark WCDMA Band 2 WCDMA Band 4 WCDMA Band 5 LTE Band 2 LTE Band 4 LTE Band 5 LTE Band 7 LTE Band 12 LTE Band 13 LTE Band 17 LTE Band 25 LTE Band 26 LTE Band 38 LTE Band 41 1, Primary #0 TX, RX 3, Secondary #0 RX 1, Primary #0 TX, RX 3, Secondary #0 RX 1, Primary #0 TX, RX 3, Secondary #0 RX 1, Primary #0 TX, RX 2, Primary #1 RX 3, Secondary #0 RX 4, Secondary #1 RX 1, Primary #0 TX, RX 2, Primary #1 RX 3, Secondary #0 RX 4, Secondary #1 RX 1, Primary #0 TX, RX 3, Secondary #0 RX 2, Primary #1 TX, RX 4, Secondary #1 RX 1, Primary #0 TX,R X 3, Secondary #0 RX 1, Primary #0 TX, RX 3, Secondary #0 RX 1, Primary #0 TX, RX 3, Secondary #0 RX 1, Primary #0 TX, RX 2, Primary #1 RX 3, Secondary #0 RX 4, Secondary #1 RX 1, Primary #0 TX,RX 3, Secondary #0 RX 2, Primary #1 TX, RX 4, Secondary #1 RX 1, Primary #0 RX 2, Primary #1 TX, RX 3, Secondary #0 RX 4, Secondary #1 RX 1 Set 1 2.81 2.03 2.48 2.59 1.04 0.98 2.81 2.96 2.03 2.09 2.48 1.50 2.59 2.09 1.04 0.98 2.67 1.82 1.91 1.02 1.33 1.02 1.91 0.78 2.81 2.96 2.03 2.09 1.14 1.12 2.67 1.77 2.61 2.67 2.85 1.82 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX: Port 1 (TX) / Port 1, 3 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 3 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 3 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 2 (TX) / Port 2, 4 (RX) 1TX/4RX: Port 2 (TX) / Port 1 ~ 4 (RX) Band Port Antenna Gain (dBi) Remark LTE Band 66 1, Primary #0 TX, RX 2.48 1TX/2RX: Port 1 (TX) / Port 1, 3 (RX) Set Band Port Antenna Gain (dBi) Remark 2, Primary #1 RX 3, Secondary #0 RX 4, Secondary #1 RX 1.50 2.86 2.09 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) Set Band Port Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) WCDMA Band 2 WCDMA Band 4 WCDMA Band 5 1, Primary #0 TX, RX 4, Secondary #0 RX Down 1, Primary #0 TX, RX 4, Secondary #0 RX Down Up Up Up 1, Primary #0 TX, RX 4, Secondary #0 RX Down LTE Band 2 LTE Band 4 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down Up Up Down Down LTE Band 5 LTE Band 7 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 2, Secondary #1 RX Up 3, Primary #1 TX, RX Down LTE Band 12 1, Primary #0 TX, RX 4, Secondary #0 RX Down LTE Band 13 1, Primary #0 TX, RX 4, Secondary #0 RX Down LTE Band 17 1, Primary #0 TX, RX Up Up Up LTE Band 25 LTE Band 26 LTE Band 38 LTE Band 41 4, Secondary #0 RX Down 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 2, Secondary #1 RX Up 3, Primary #1 TX, RX Down 1, Primary #0 RX 2, Secondary #1 RX 3, Primary #1 TX, RX 4, Secondary #0 RX Up Up Down Down 1.6 2.40 2.10 2.00 1.50 2.40 1.6 1.4 2.40 2.40 2.10 1.8 1.0 2.00 1.50 2.40 0.80 2.80 1.20 1.80 0.9 1.7 1.20 1.80 1.60 1.40 2.40 2.50 1.50 2.40 0.80 1.40 2.90 0.80 2.90 2.90 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.7 0.9 0.6 0.7 0.9 0.6 1.0 1.8 1.5 1.4 0.9 1.8 1.0 0.7 1.5 1.8 1.5 1.1 0.1 1.4 0.9 1.8 0.1 1.9 0.6 1.2 0.3 1.1 0.6 1.2 1.0 0.7 1.5 1.9 0.9 1.8 0.1 0.5 2.3 0.1 2 2.3 2 Remark 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 3 (TX) / Port 2, 3 (RX) 1TX/4RX: Port 3 (TX) / Port 1 ~ 4 (RX) Set Band Port Remark Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) 2 LTE Band 66 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down 2.1 1.80 1.50 2.00 0.6 0.7 0.9 0.6 1.5 1.1 0.6 1.4 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) Set Band Port Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) WCDMA Band 2 WCDMA Band 4 WCDMA Band 5 1, Primary #0 TX, RX 4, Secondary #0 RX Down 1, Primary #0 TX, RX 4, Secondary #0 RX Down 1, Primary #0 TX, RX 4, Secondary #0 RX Down Up Up Up LTE Band 2 LTE Band 4 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down Up Up Down Down LTE Band 5 3 LTE Band 7 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 2, Secondary #1 RX Up 3, Primary #1 TX, RX Down LTE Band 12 1, Primary #0 TX, RX 4, Secondary #0 RX Down LTE Band 13 1, Primary #0 TX, RX 4, Secondary #0 RX Down LTE Band 17 1, Primary #0 TX, RX Up Up Up 4, Secondary #0 RX Down 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 2, Secondary #1 RX Up 3, Primary #1 TX, RX Down LTE Band 25 LTE Band 26 LTE Band 38 9.0 8.6 5.9 8.3 4.6 4.9 9.0 8.6 9.0 8.6 5.9 8.3 5.9 8.3 4.6 4.9 8.2 7.8 3.6 4.3 6.1 6.5 9.0 8.6 9.0 8.6 5.5 5.9 8.2 7.8 7.8 3.60 4.30 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.7 0.9 0.6 0.6 0.6 0.7 0.9 0.6 8.4 8 5.3 7.7 4 4.3 8.4 7.9 8.1 8 5.3 7.6 5 7.7 4 4.3 7.5 6.9 3 3.7 5.5 5.9 3 3.7 8.4 7.9 8.1 8 4.9 5.3 7.5 6.9 7.2 Remark 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) LTE Band 41 1, Primary #0 RX Up 1TX/2RX: Port 3 (TX) / Port 2, 3 (RX) Set Band Port Remark 2, Secondary #1 RX 3, Primary #1 TX, RX 4, Secondary #0 RX Up Down Down 1TX/4RX: Port 3 (TX) / Port 1 ~ 4 (RX) Set Band Port Remark 3 LTE Band 66 1, Primary #0 TX, RX 2, Secondary #1 RX 3, Primary #1 RX 4, Secondary #0 RX Up Up Down Down 1TX/2RX: Port 1 (TX) / Port 1, 4 (RX) 1TX/4RX: Port 1 (TX) / Port 1 ~ 4 (RX) Note: The above information was declared by manufacturer. For conducted test, only the highest antenna gain has been tested and recorded in the test report. For radiated test, set 1 ~ set 3 antenna has been tested and recorded in the test report. Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) 8.2 7.8 8.2 7.2 8.6 7.2 8.6 0.7 0.9 0.6 7.5 6.9 7.6 0.6 0.7 0.9 0.6 6.6 7.9 6.3 8 1 2 3 Note1:

Set Ant. Port Brand Model Name Type Connector Set Ant. Port Brand Model Name Type Connector Remark 1 1, Primary #0 2 2, Primary #1 3 3, Secondary #0 4 4, Secondary #1 CISCO CISCO CISCO CISCO N/A N/A N/A N/A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-A CISCO MA-ANT-C1-A 3 3, Primary #1 Down CISCO MA-ANT-C1-A 4 4, Secondary #0 Down CISCO MA-ANT-C1-A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-B CISCO MA-ANT-C1-B 3 3, Primary #1 Down CISCO MA-ANT-C1-B 4 4, Secondary #0 Down CISCO MA-ANT-C1-B Up Up Up Up Antenna Gain (dBi) Note 1 Internal Antenna Gain (dBi) Remark Note 1 External External PIFA PIFA PIFA PIFA Dipole Dipole Dipole Dipole Panel Panel Panel Panel I-PEX I-PEX I-PEX I-PEX Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Set Band Port Antenna Gain (dBi) Remark 1 LTE Band 14 1, Primary #0 TX, RX 3, Secondary #0 RX 1.45 0.7 Set Band Port Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) 1TX/2RX Remark Set Band Port Antenna Gain (dBi) Remark 2 3 LTE Band 14 LTE Band 14 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 1, Primary #0 TX, RX Up 4, Secondary #0 RX Down 1.1 2.00 6.10 6.50 0.6 0.6 0.6 0.6 0.5 1.4 5.5 5.9 1TX/2RX 1TX/2RX Note: The above information was declared by manufacturer. For conducted test, only the highest antenna gain has been tested and recorded in the test report. For radiated test, set 1 ~ set 3 antenna has been tested and recorded in the test report. Set Ant. Port Brand Model Name Type Connector 1 2 3 Note1:

1 1, Primary #0 2 2, Primary #1 3 3, Secondary #0 4 4, Secondary #1 CISCO CISCO CISCO CISCO N/A N/A N/A N/A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-A CISCO MA-ANT-C1-A 3 3, Primary #1 Down CISCO MA-ANT-C1-A 4 4, Secondary #0 Down CISCO MA-ANT-C1-A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-B CISCO MA-ANT-C1-B 3 3, Primary #1 Down CISCO MA-ANT-C1-B 4 4, Secondary #0 Down CISCO MA-ANT-C1-B Up Up Up Up Antenna Gain (dBi) Remark Note 1 Internal Antenna Gain (dBi) Remark Note 1 External External I-PEX I-PEX I-PEX I-PEX Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Set Ant. Port Brand Model Name Type Connector Set Band Port Antenna Gain (dBi) Remark 1 LTE Band 30 2, Primary #1 TX, RX 4, Secondary #1 RX Set Band Port Antenna Gain

(dBi) Cable Loss

(dB) True Gain

(dBi) 2 3 LTE Band 30 LTE Band 30 2, Secondary #1 RX Up 4.60 3, Primary #1 TX, RX Down 2, Secondary #1 RX Up 3, Primary #1 TX, RX Down 3.9 8.1 8.8 3.9 3.0 7.4 7.9 Note: The above information was declared by manufacturer. For conducted test, only the highest antenna gain has been tested and recorded in the test report. For radiated test, set 1 ~ set 3 antenna has been tested and recorded in the test report. 1TX/2RX Remark 1TX/2RX 1TX/2RX PIFA PIFA PIFA PIFA Dipole Dipole Dipole Dipole Panel Panel Panel Panel 2.48 2.33 0.7 0.9 0.7 0.9 Set Ant. Port Brand Model Name Type Connector Set Ant. Port Brand Model Name Type Connector Remark 1 1, Primary #0 2 2, Primary #1 3 3, Secondary #0 4 4, Secondary #1 CISCO CISCO CISCO CISCO N/A N/A N/A N/A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-A CISCO MA-ANT-C1-A 3 3, Primary #1 Down CISCO MA-ANT-C1-A 4 4, Secondary #0 Down CISCO MA-ANT-C1-A 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-B CISCO MA-ANT-C1-B 3 3, Primary #1 Down CISCO MA-ANT-C1-B 4 4, Secondary #0 Down CISCO MA-ANT-C1-B Up Up Up Up 1 2 3 Note1:

Set Band Port Antenna Gain (dBi) 1 LTE Band 42 2, Primary #1 TX, RX 4, Secondary #1 RX Note: The above information was declared by manufacturer. Only the highest antenna gain has been tested and recorded in the test report. I-PEX I-PEX I-PEX I-PEX Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Reversed-SMA Antenna Gain (dBi) Remark Note 1 Internal Antenna Gain (dBi) These External antennas don't support band 42. External Remark 1TX/2RX PIFA PIFA PIFA PIFA Dipole Dipole Dipole Dipole Panel Panel Panel Panel 2.76 2.72 Antenna Gain (dBi) Remark Note 1 Internal Antenna Gain (dBi) Set Ant. Port Brand Model Name Type Connector 1 1, Primary #0 2 2, Primary #1 3 3, Secondary #0 4 4, Secondary #1 CISCO CISCO CISCO CISCO N/A N/A N/A N/A I-PEX I-PEX I-PEX I-PEX Set Ant. Port Brand Model Name Type Connector Remark 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-A CISCO MA-ANT-C1-A Reversed-SMA Reversed-SMA 3 3, Primary #1 Down CISCO MA-ANT-C1-A Reversed-SMA These 4 4, Secondary #0 Down CISCO MA-ANT-C1-A Reversed-SMA antennas 1 1, Primary #0 2 2, Secondary #1 CISCO MA-ANT-C1-B CISCO MA-ANT-C1-B Reversed-SMA don't support Reversed-SMA band 43. 3 3, Primary #1 Down CISCO MA-ANT-C1-B 4 4, Secondary #0 Down CISCO MA-ANT-C1-B Reversed-SMA Reversed-SMA Up Up Up Up External External Set Band Port Antenna Gain (dBi) 1 LTE Band 43 2, Primary #1 TX, RX 4, Secondary #1 RX Note: The above information was declared by manufacturer. Only the highest antenna gain has been tested and recorded in the test report. Remark 1TX/2RX PIFA PIFA PIFA PIFA Dipole Dipole Dipole Dipole Panel Panel Panel Panel 2.92 2.44 1 2 3 Note1:

A cisco Meraki MG41E Model (225/25) : MG41E-HW Power (8A /#iA): 12V == 1A; 48-57 Vdc, 0.354 (PoE) Ema / Mae > LTE / LTE FCC ID: UDX-600119010 IC: 6961A-600119010 CAN |CES-3 (B) 3 (B) fi), ' ae C cx @ Be. 1 Shes R-NZ This device complies with part 15 of the Cc A Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept, any interference received, including interference that may cause undesired operation. Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 - USA Power (8A /#A) : v= [A ; 48-57 Vdc, 0.35A (PoE) EReS/FReM :

FCC ID: UDX-600119010 IC: 6961A-600119010 CAN ICES-3 (B) / NMB-3 (B) oe E134 R-NZ Model (2458/23) R TF 201-210209 D210059 U ctfnetfne cisco Meraki MG41

) :MG41-HW LTESRS / LTE PISS CER. Mmmm 159098 This device complies with part 15 of the FCC cA Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept, any interference received, including interference that may cause undesired operation Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134- USA

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA May 5, 2021 Letter of Attestation Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 We, Cisco Systems, Inc., declare the Meraki MG41 and MG41E (Models M421-HW and MG41E-HW, FCC ID:

UDX-600119010) LTE Gateway complies within the following FCC regulations:

1) 2) 3) 4) 5) 6) Part 24E Part 27L Part 22H Part 27F Part 96 Part 90 Best, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA Request for Confidentiality May 13, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 Subject: Request for Confidentiality FCC ID: UDX-600119010 To Whom It May Concern:

Schematic Diagram Block Diagram Theory of Operation Parts List Tune-up Info Pursuant to the provisions of Sections 0.457 and 0.459 of the Commissions rules (47 CFR 0.457, 0.459), we are requesting the Commission to withhold the following attachments as confidential document from public disclosure indefinitely. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In additional to above mentioned documents, pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices. We are requesting the commission to grant short-term confidentiality request on the following attachments for 180 Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and that information will be available for public review once the grant of equipment authorization days. External Photos Internal Photos Test Setup Photos User Manuals is issued. Best Regards, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA May 5, 2021 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 Grant Deferral Request We request to defer the grant of FCC ID: UDX-600119010 to the date of June 21, 2021 due to To whom it may concern:

our marketing plan. Best, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA May 4, 2021 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

Certification. Sporton International Inc. Name

: Leo Huang Job Title

: Manager Agent Authorization Letter I hereby have entrusted the following person to be a proxy regarding application for Type Address

: No.8, Lane 724, Bo-ai St., Jhubei City, HsinChu County 302, Taiwan, R.O.C. e-mail

: Leohuang@sporton.com.tw I am therefore responsible for the contents of the application. Brand name and model type of the specified radio equipment:

CISCO MG41-HW/MG41E-HW FCC ID: UDX-600119010 This authorization is valid until further written notice from the applicant. Best, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA Date: May 6, 2021 Declaration of Professional Installation Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: Declaration of Professional Installation FCC IDUDX-600119010 To whom It may concern, Please be advised that due to the unique market and function targeted by this product, this product will need trained professionals in configuring and installing the product. We hereby declare that the product will be distributed through a controlled distribution channel which has trained professionals to install this product and will not be sold directly to the general public through retail stores. Sincerely, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com

Supplier's Declaration of Conformity Unique Identifier(s): MG41-HW and MG41E-HW Party issuing Suppliers Declaration of Conformity Cisco Systems 170 West Tasman Drive, San Jose, CA 95134 USA USA Responsible Party U.S. Contact Information Aurelio Llabres Compliance Manager, CNG Cisco Systems Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com FCC Compliance Statement (for products subject to Part 15) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cisco Systems, Inc. 170 West Tasman Drive, San Jose, CA 95134 USA May 5, 2021 Federal Communications Commission Equipment Authorization branch 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

SDoC Attestation We Cisco Systems, Inc., as the grantee of this project (FCC ID: UDX-600119010 / Brand Name:

CISCO / Model No.: MG41E-HW, MG41-HW), declare that the composite portion has been authorized under the Supplier's Declaration of Conformity procedures (Sporton report No.:

FD050716-08, FCC designation number: TW1131). The final product shall consequently comply with the FCC rule applied to the SDoC Procedure. Best, Aurelio Llabres Compliance Manager, CNG Cisco Systems, Inc. Tel: +1 415-432-1000 Fax: +1 415 632-5899 rllabres@cisco.com