CITAQ S1 CITAQ S1 Series POS Terminal Installation Manual Applicable models: S1A01, S1A02, S1A03, S1A01-X, S1A02-X, S1A03-X (X can be represented 1~9) Please read this manual carefully before installation ATTENTION This is a Class A product. In a living environment, this product may cause radio interference. In this case, the user may need to take adequate measures. Replacing with error battery may cause explosion!
Replaced old battery should be handed over to the repairman for disposal!Do not put them into fire!
There is a Lithium battery in the device. Its voltage will decline if it is not turned on for long time. It will even stop working if the battery volume was exhausted. So the device requires to be charged at least in 2 months. If there is any problem during installation or any confusion about this manual, please send email to our customer support department:
support@citaq.com There will be professional experts to help you!
Or visit our website:
www.citaq.com Thank you for using our products!
Kindly find below items when opening carton ITEM LIST Device Thermal pape Adaptor Power core Manual Twisted ring Desiccative Name CPU RAM ROM OS 1 unit 1 roll 1 pc 1 pc 1 pc 1 pc 2 bags Configuration Remark Quad-Core Cortex-A17,up to 1.8GHz 4GB 32GB Android 10.0 Display 9.7 1024*768; 11.6 1366*768;
13.3 1920*1080 Touch Screen Capacitive multi-touch Bluetooth Bluetooth4.0 BLE Speaker Stereo 2W Indicator light Programmable orange WiFi IEEE 802.11 a/b/g/n/ac Remark Name Printer Configuration 80mm Thermal printer PrintingSpeed MAX 20mm/s Printing Span 200km Sensor out of paper, cover open Cutting times 2 million times cutting way half cut/ full cut Power supply DC24V/2.5A input Ports LAN 5X USB 1X RS232 1X HDMI 1X LAN 1X RJ11 for Cash drawer RJ45,10/100/100M Audio jack 3.5mm standard audio jack, 4 phases with MIC. Working 0 -50 Humidity 10%-90%
Environment Non-condensation Temperature Storage Environment Temperature
-10 60 Humidity 10%-90%, Non-condensation Installation Notes Put the whole machine on a stable table afterunpacking. Installation Notes Product Interface Install Paper Display Description Install the TF Card Step 1: Unscrew the metal cover Step2: Insert TF card to corresponding slot Step3: Install the metal cover Wall mounting Installation Step 1. A suitable flat wall should be required for installing fixture. Install the 4 screws(100x100mm) that fixing the bracket on the wall, and install the 4 screws(100x100mm) that embedding the equipment on the metal base board. Step 2 Put the equipment that installed with 4 Screws into the fixation block. Dimensions Developer debug mode 1. Enter Developer mode Turn on Settingsenter AbouttabletClick Buildnumber for 7 times or more in a row until the "you are now a developer.prompt pops up. At this point, the System page in Settings can see the Developeroptions option. Turn on debug 2. 1Enter DeveloperoptionsTurn USBdebugging on 2 Enter SettingsEnter DisplayTurn DEBUG on 3. Debug Connect the Device and computer with a double-ended USB-A cable. (Must be connected to the usb port closest to the headphone jack) At this point, the adb command of the computer can already see the device and can be developed and debugged. WiFi Step 1: Find and click the Settings on the desktop, as shown below:
Step2: In the Settings menu, click Network & internet, as shown below:
Step 3: In the Network & internet menu, click WiFi, as shown below:
Step 4: After turning on the WiFi switch, find and click the WiFi signal that needs to be connected in the displayed signal list. As shown below:
Step 5: Enter the WiFi password and click connect. As shown below:
Step 6: After the connection is complete, find the wireless signal in the WiFi list, and it will display Connected. As shown below:
Step 7: In the WiFi list, click the connected signal to delete and share it. As shown below:
Bluetooth Step 1: Find and click the Settings on the desktop, as shown below:
Step 2: In the Settings menu, click Connected devices, as shown below:
Step 3: Click Pair new device to search for Bluetooth devices. As shown below:
Step 4: Find and click the Bluetooth device to be connected in the displayed device list. As shown below:
Step 5: In the confirmation box that pops up, click Pair. As shown below:
Step 6: After the pairing is complete, you can see the Connected device in the list of connected devices. As shown below:
Step 7: Click on the paired device to delete and disconnect it. As shown below:
Daily Maintenance of the device 1. Keep the spaces clean 2. Kindly pull out the adaptor after using to lengthen the service life. 3. Routinely clean dusts of the device. Don't use liquid or spray cleaner. Wipe the touch screen and case by a soft cloth. And please avoid pouring liquid inside the machine which will bring damage of it. 4. Don't cover anything on the device when using. That will cause inefficient heat dissipating and ages the device as well as shorten the service life. 5. When unstable voltage were found, please cut the power immediately to avoid damage to the device 6. Don't use it under circumstances that are with high temperature or humidity. 7. Touch the screen with a clean figure. 8. Don't use it or store under fierce sunshine. 9. Please don't put it in high magnetic places. 10.Apply better thermal paper will avoid wearing of printer mechanizm and lengthen its service life. Routinely clean the thermal area with Alcohol pen or cotton carefully. Notice:
Don't remove any label or attached stuffs on printer by knife or metal stuffs. Any hard meterials(such as bamboo stick or hard plastic) are not allowed for cleaning the printer. These will damage the thermal area and leads area and damage the printer as well. FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between theequipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set fo rth for anuncontrolled environment. This equipment should be in stalled and operated withminimum distance 20cm between the ra diator & your body. CITAQ CO., LTD Tel: 86-754-88990429 Website: www.citaqpos.com Add: 9F&13/F, Chuangye Bldg, Keji Middle Road Hi-Tech Zone, Shantou, Guangdong, China 515000