FCC ID: 2AND8-5WCHG Wireless Car Charger

Brief introduction:

(1) Indication LED light

(2) Phone holder

(3) Wireless Charging Position

(4) Micro USB Input

Specification:

Wireless Distance: 8mm

Efficiency: ≥75%

Dimensions: 115*95.5*50mm

Weight: 60g

Wireless Charger Input: 5V/2A, 9V/2A

Wireless Charger output(Max): 10W (Compatible with 5W or 7.5W)

Use Operation:

Charge other device

(a) Use a suitable cable to connect the Wireless Car Charger

(*Remarks: This wireless car charger is suitable for 10W fast charge, need to connect to a

Fast Charge power like 9V/2A)

(b) Fix the Wireless Car charger to car’s air condition mount or somewhere suitable

(c) Put a Smartphone in the Wireless Car charger, the gravity design will make the

charger close automatically and fix the Smartphone inside.

FCC Statement

This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the

following two conditions:

(1) This device may not cause harmful interference, and (2) this devicemust accept any

interference received, including interference that may cause undesired operation. Changes or

modifications not explicitly approved by the partyresponsible for compliance could void the

user's authority tooperate this equipment.

Note: this equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 and part 18 of the FCC Rules. These limits are designed to

providereasonable protection against harmful interference in a residential installation. This

equipment generates, uses and canradiate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference toradio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged totry to correct the

interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

· Consult the dealer or an experienced radio/TV technician for help.

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. During the operation of device a distance of 15 cm surrounding the device and 20

cm above the top surface of the device must be respected.

This device complies with Part 18 of the FCC Rules. This equipment generates uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

●Increase the separation between the equipment and any other radio device.

●Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AND8-5WCHG Label and Location Size: L: 3.0cm*W: 1.5cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

CJ Global Inc. Agent Authorization Company: CJ Global Inc. Address:20-21 Wagaraw Road Bldg 30 Fair Lawn, New Jersey, New Jersey, 07140, United States Product Name:Car Charger Trade Mark: CJ TECH Model Number(s): 53816-DI FCC ID: 2AND8-5WCHG We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-07-10 Signature:

Name:

Coby Chen Title:

Manager Company: CJ Global Inc.

CJ Global Inc.

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

USA

Date: 2021-07-10

Subject; Request for Confidentiality

FCC ID: 2AND8-5WCHG

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we

are requesting the Commission to withhold the following attachment(s) as confidential

documents from public disclosure indefinitely.

These documents contain detailed system and equipment descriptions and are considered as

proprietary information in operation of the equipment. The public disclosure of these documents

might be harmful to our company and would give competitors an unfair advantage in the market.

Schematic Diagram

Block Diagram

Parts List

Operational Description

Tune-up Procedure

External Photos

Test Setup Photos

Internal Photos

User Manual

In additional to above mentioned documents, in order to comply with the marketing regulations

in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that

business sensitive information remains confidential until the actual marketing of newly

authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR

For 45 days, pursuant to Public Notice DA 04-1705.

For 180 days pursuant to KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of equipment

authorization is issued.

Sincerely,

Signature:

Name: Coby Chen

Title: Manager