Model: 72792 1. USB 2.
-
-
3.
- TYV-1731 360 5V/2A9V/1.67A-2A 5V/1A9V/1.1A 14.2*8.6*8cm 69g 75%
8mm 1. 2. PCB 1.//
2. 3. Product component Technical specifications Wireless Charger Aera 360Rotation Input Output 5V/2A9V/1.67A-2A 5V/1A9V/1.1A Dimensions 14.2*8.6*8cm Weight Efficiency Charging distance 69g 75%
8mm Identification of Parts:
1.Cable 2.wireless charger Recycle Always return your used electronic productsPCB, and packaging materials to dedicated collection points. This way you help prevent uncontrolled waste disposal and promote the recycling of materials. Phone Clip This product parts with magnetic, metal may be adsorbed by the product. Please do not make the bank card, credit card or other items with magnetic medium is close to the product, So as not to lose its stored data by demagnetization. Safety instruction 1.Do not expose Charger to high temperature/
light/Strong magnetic field, or other environment like fire. 2.If the device gets wet, please dry it off before further using. 3.Please dont place any other batteries or metals on the charger when it is power on. Model: 72792 wireless car charger Charging instruction 1. Insert the AC end of the adapter into the socket, and then insert the other end into the charger. The red LED on the charger will flash, indicating that the device is ready to charge. 2. Place the mobile phone in the corresponding position on the charger and keep it in good condition. 3.When the phone is charging,the blue light keeps on. The blue light turns off for Samsung when the phone is fully charged.for Iphone,the blue light keeps on. 4. When a device that does not have a wireless charging function is placed on the wireless charger, red light flashes. Note This device cannot be wirelessly charged. Protection User Manual Over-current Over-voltage Over-heating IC Statement This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. The term IC: before the certification/registration number only signifies that the Industry Canada technical specifications were met. This product meets the applicable Industry Canada technical specifications. Le prsent appareil est conforme aux CNR d'Industrie Canada applicable aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.