User Manual Item Name: Wireless Charging Desk Lamp Item Number24063-DI,24061-DI Color: White, Black Main function Mobile phone wireless charging Lamp 90-135turn Adjust different color and different brightness Sensor Touch control Built in USB output 5V 500mA Main specs Wireless charging power 5W LED power 5W Color Temperature2700K-6500K Adaptor AC110-240v 50-60HZ Working currentDC5.0--5.25v/3A Charging plugmicro USB LED qty54pcs/4014SMD /Epistar/4 level Led angel120 Lumens 800LUX at 36cm CRI:90MAX 3 type color Warm Led 2700K/Cold Led 6500K/Cold +warm mix Lifetimes50000hrs Products Size, weight ,material MaterialABS+PC+Aluminum Products Size44*12*4cm Products weight394g Wireless charging specs Suit for all mobile phone with wireless charging function Wireless charging timeAround 4.5-5hrs Wireless charging distance6mm Wireless charging power5V/1A=5W Wireless transfer rate70%
Wireless charging standardQI FOD: for Metal Object 20mm Products details Products picture Picture 1: Overall Picture 2:Fucntion button Picture 3:Micro plug input Picture 4Wireless charging mobile phone Wireless charging LED Switch LED color choose brightness-
Timer:2hrs Timer:1hrs Brightness+
USB output micro5V/3A Input Products Function details mobile phone Wireless charging: Put mobile phone in center position, begin charging(5W) LED Switch: When LED turns off, touch to turn on it. LED color chooses: When led turn on, touch 1 second to make it lighter, and to choose LED color (Warm, Cold, and Mix), And last time to touch LED is turn off it. brightness-: When Led turn on, Touch 1 second to adjust 1 time, total 13 levels Timer: 2hrs. Led will turn off after 2 hrs. Timer: 1hrs. Led will turn off after 1hrs Brightness +When Led turn on, Touch 1 second to adjust 1 time, total 13 levels USB output5V/500mA micro5V/3A Package with 5V 3A cable 1M Products Operation Lamp operation Connect micro USB/5V/3A With Adaptor, and opera Lamp based on each button Wireless charging operation Put mobile phone to the position and begging wireless charging USB Output operation Connect 5V 3A cable to this USB plug, will begin charging at 5V 500mA. Pay attention to Pls make sure use the 5V 3A adaptor and 5V 3 A cable Pls make sure the table without water etc. Thanks for choosing our products, Enjoy it!!!
Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 and part 18 of the FCC Rules. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Increase the separation between the equipment and any other radio device. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. This device complies with part 15 and part 18 of the FCC Rules. Operation is Subject To the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not explicitly approved by the party responsible for compliance could void the user's authority to operate this equipment. The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. During the operation of device a distance of 15 cm surrounding the device and 20 cm above the top surface of the device must be respected. Caution: Any changes or modifications not expressly approved could void the users authority to operate the equipment.