Qi Enabled Wireless Charger Qi Chargeur sans Fil USER MANUAL/Manuel de l'utilisateur Prcautions:
Pendant le chargement, dsactivez les fonctions de vibration de votre tlphone pour sassurer que la vibration ne bouge pas le dispositif et perd la charge. Seulement 1 dispositif de Qi active peut tre charg en mme temps. Caractristiques:
Puissance dentre : DC5V 1.5A-2A Puissance de sortie: DC5V 1A Qi sans l Sortie des ports USB: 1.5A partag emprature oprationnelle: 40F (5C) 95F (35C) Chargement distance: jusquau 10mm Ecacit de fonctionnement: >73%
Frquence de fonctionnement: 110-205KHz Attention:
Cet quipement gnre, utilise et peut mettre des nergies en radiofrquence et, s'il n'est pas install et utilis conformment aux instructions, il pourrait causer des interfrences nuisibles aux communications de radio Si cet quipement cause des interfrences nuisibles la rception de la radio ou de la tlvision, lesquels peuvent tre dtermin en teignant et en allumant l'quipement, l'utilisateur est encourag essayer de les corriger par une ou plusieurs des mesures suivantes:
Included Items:
1x Wireless Charger 1x Micro USB Cable 1x Quick Start Guide Qi Enabled Wireless Charger Englsih Instructions:
Using the included micro USB cable, connect to a computer or wall charger (not included) to enable power to the wireless charger, a red LED will indicate power. Conrm that your device is Qi enabled. Place your QI enabled device in the center of the charging plate, when placed correctly a blue LED will indicate the Qi enabled device is charging. Use the 2 USB ports to charge non-Qi enabled devices with input of 1A max. Warnings Do not leave the product in a hot location. Do not disassemble, modify or repair this product. Do not allow water or liquids to come in contact with the product. Do not place any metallic items on the surface of the product. Device must be Qi enabled to charge, do not put a device that is not Qi enabled or charger may overheat. Precautions:
Disable vibration features on your phone while charging to ensure vibration does not move the device and lose charge. Only 1 Qi enabled device can be charged at the same time. Specifications:
Input: DC5V 1.5A-2A Output: DC5V 1A Qi wireless Output USB Ports: 1.5A shared Operational Temperature: 40F (5C) 95F (35C) Charging Distance: up to 10mm Working eciency: >73%
Working fr equency: 110-205KHz Caution:
This equipment generates, uses, and can radiate radio energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. frequency If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver in connected. Consult the dealer or an experienced radio/TV technician for help This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating .between 0.45-30 MHz Made in China Articles inclus:
1x Chargeur sans l 1x Cble micro USB 1x Guide de dmarrage rapide Qi Chargeur sans Fil Franais Mode demploi:
Connectez le cble micro USB (inclus) un ordinateur ou un chargeur mural (non inclus) pour permettre lalimentation sur le chargeur sans l. Un voyant lumineux rouge sallume pour indiquer que la connexion est bien faite. Vriez que votre dispositif Qi est activ. Placez votre dispositif QI au centre de la plaque de charge ment, lorsquil est plac correctement, un voyant lumineux bleu sallume pour indiquer quil est en train de charger. Utilisez les 2 ports USB pour charger dispositifs non Qi, avec une alimentation de 1A max. Avertissement Ne laissez pas ce produit dans un endroit chaud. Ne pas dmonter, modier ou rparer ce produit Ne permettez pas que leau ou liquides entrent en contact avec ce produit. Ne placez aucun objet mtallique sur la surface du produit Le dispositif doit tre charg par Qi, ne pas mettre un appareil non compatible Qi ou le chargeur pourrait se rchauer.
-
Rorientez ou dplacez l'antenne de rception Augmentez la distance entre l'quipement et le rcepteur Branchez l'quipement dans une prise sur un circuit dirent de celui auquel le rcepteur est branch Consultez le revendeur ou un technicien radio / TV expri ment pour obtenir de l'aide
-
Artculos incluidos:
1x cargador inalmbrico 1x Cable Micro USB 1x Gua de uso Cargador Inalmbrico Habilitado Para Qi Espaol Ce produit peut causer des interfrences aux quipements de radio et par consquence il ne doit pas tre install prs du matriel de communication de scurit maritime ou tout autre quipement critique de navigation ou de communication oprant entre 0.45-30 MHz. Fabriqu en Chine Instrucciones:
Con el cable micro USB incluido, conecte el cargador a un ordenador o cargador de pared (no incluido) para activar el cargador inalmbrico, un LED rojo indicar la alimentacin. Conrme que su dispositivo est habilitado para Qi. Coloque su dispositivo habilitado para QI en el centro de la placa de carga, cuando se coloque correctamente un LED azul indicar que el dispositivo habilitado para Qi se est Utilice los 2 puertos USB para cargar dispositivos no compatibles con Qi con entrada de 1A mx. Advertencias No deje el producto en un lugar caliente. No desmonte, modique ni repare este producto. No permita que agua o lquidos entren en contacto con el producto. No coloque objetos metlicos sobre la supercie del producto. El dispositivo debe estar habilitado para cargar Qi, no ponga un dispositivo que no est habilitado para Qi o el cargador podra sobrecalentarse. cargando. se Reorientar o reubicar la antena receptora Aumente la separacin entre el equipo y el receptor Conecte el equipo en un tomacorriente de un circuito distinto al que est conectado el receptor. Consulte con el distribuidor o con un tcnico de radio / TV experimentado para obtener ayuda. Este producto puede causar interferencia a equipos de radio y no debe instalarse cerca de equipos de comunicaciones de seguridad martima u otros equipos crticos de navegacin o comunicacin que funcionen entre 0,45 y 30 MHz Hecho en China Precauciones:
Desactive las funciones de vibracin en su telfono mientras carga para asegurar que la vibracin no mueva el dispositivo y se pierda carga. Slo se puede cargar un dispositivo compatible con 1 Qi a la vez. Especificaciones:
Entrada: DC5V - 1.5A-2A Salida: DC5V - 1A Qi inalmbrico Salida puertos USB: 1.5A compartido Temperatura de funcionamiento: 40 F (5 C) - 95 F (35 C) Distancia de carga: hasta 10mm Eciencia de trabajo:> 73%
Frecuencia de trabajo: 110-205KHz Precaucin:
Este equipo genera, utiliza y puede irradiar energa de radiofrecuencia y, si no se instala y utiliza de acuerdo con las instrucciones, puede causar interferencia a las comunicaciones de radio. Si este equipo causa interferencias a la recepcin de radio o televisin, lo cual puede determinarse encendiendo y apagando el equipo, se recomienda al usuario que intente corregir la interferencia mediante una o ms de las siguientes medidas:
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
receiver is connected. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Reorient or relocate the receiving an Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the Consult the dealer or an experienced radio/TV technician for help. tenna.