Clarinox Technologies Pty. Ltd. ABN 89 062 954 170 28 / 296 Bay Rd Cheltenham VIC 3192 Tel (613) 9095 8088 www.clarinox.com KM-153103 koala connect (aka Joey) DATASHEET The information contained herein shall not be disclosed to unauthorized persons. This document remains the property of Clarinox Technologies Pty Ltd. It contains proprietary and confidential information and is considered to be a trade secret by Clarinox Technologies Pty Ltd. No information contained herein is to be shared, copied, disclosed, or otherwise compromised in any way without the written consent of Clarinox Technologies Pty Ltd. The contents of this document are subject to change without notice. Clarinox Technologies Pty Ltd reserves the right to make changes in this document as progress in planning, development, engineering or manufacturing warrants. All Rights Reserved, Copyright Clarinox Technologies Pty Ltd 2018 KM-153103 Datasheet Revision History Revision Date Designed by Approved by Description 1.0 1.1 08 May 2018 ND 15 June 2018 ND GT GT Initial draft FCC Certification warning details added Page 1 KM-153103 Datasheet Table of Contents Highlights ................................................................................................................................ 4 Product Description ................................................................................................................ 4 Module Certification Details ........................................................................................... 5 1.2.1.1 Federal Communications Commission (FCC) Statement ............................................ 5 1.2.1.2 End Product Labelling ................................................................................................. 5 Important Notice to OEM Integrators ............................................................................ 5 Antenna Installation ........................................................................................................ 6 Manual Information to the End User .............................................................................. 6 Federal Communication Commission Interference Statement ...................................... 6 Radiation Exposure Statement ....................................................................................... 7 Product Selector ...................................................................................................................... 8 Module Pinouts ....................................................................................................................... 8 Hardware Interfaces ............................................................................................................... 9 Bluetooth Signals Hardware Details ..................................................................................... 10 WiFi Signals Hardware Details .............................................................................................. 10 Block Diagram ....................................................................................................................... 11 Features ................................................................................................................................ 11 Microcontroller ..................................................................................................................... 12 Software Features ................................................................................................................. 12 Package (Dimensions) ........................................................................................................... 14 Environmental Data, Quality & Reliability ............................................................................ 14 Electrical Characteristics ....................................................................................................... 14 Applications ........................................................................................................................... 15 Pin Compatible Wireless Variants ......................................................................................... 15 Supporting Products ............................................................................................................. 15 Placement Details ................................................................................................................. 16 Page 2 KM-153103 Datasheet List of Figures Figure 1: KM-153103 Koala Connect Module ....................................................................................... 4 Figure 2: Module Pinouts ........................................................................................................................ 8 Figure 3: KM-153103 Module Block Diagram ....................................................................................... 11 Figure 4: Placement Details .................................................................................................................. 16 List of Tables Table 1: Product Selector ........................................................................................................................ 8 Table 2: Module Pinouts ......................................................................................................................... 9 Table 3: Bluetooth Signals Hardware Details ........................................................................................ 10 Table 4: WiFi Signals Hardware Details ................................................................................................. 10 Page 3 KM-153103 Datasheet Highlights Complies with Part 15 of the FCC Rules Wi-Fi & dual-mode Bluetooth Supports custom Bluetooth Low Energy profiles and services On-board Wi-Fi + Bluetooth antennas Micro access point High speed iAP & iAP2 support Embedded Wi-Fi and Bluetooth stack Use directly with final design or prototype on koala evm with Clarinox Carrier boards. (KC-
0181xx, KC-0081xx) Product Description Figure 1: KM-153103 Koala Connect Module Joey Wi-Fi + Bluetooth modules are compact all-in-one standalone modules featuring Wi-Fi WLAN
/ Wi-Fi Direct, Bluetooth Classic and Bluetooth Low Energy. When used in conjunction with koala evm, the Joey modules provide a stable environment to ease the integration of wireless technologies into a project. The modules feature Texas Instruments WL183xMOD variants with Wi-Fi and Bluetooth coexistence and STM32F412CG on-board processor to drive the user application in addition to supporting the wireless protocols. Flexibility of wireless technology is provided with version 4.1 Bluetooth Classic, Bluetooth Low Energy, WLAN and Wi-Fi Direct with IEEE802.11a/b/g/n standards supported. Joey modules will help shorten the development time, reduce development costs and open the door to new possibilities for wireless device features. Joey modules may be used stand-alone products with no additional hardware required; or used in conjunction with other hardware. Additional sensors can be connected directly to the module via GPIO, ADC, I2C, SPI and UART. Page 4 KM-153103 Datasheet Module Certification Details KM-153103 Koala Connect module complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause undesired operation. Clarinox Technologies declares that the radio equipment type RF module is in compliance with Directive 2014/53/EU. The compliance has been verified in the operating frequency band of 2400-2483.5 MHz. Developers and integrators that incorporate the KM-153103 Module in any end products are responsible for obtaining applicable regulatory approvals for such end product. The KM-153103 has been tested in the 2400 MHz-2483.5 MHz ISM frequency band at 3.3 V with a maximum peak power of 19.7 dBm EIRP across the temperature range 40C to +85C and tolerance. 1.2.1.1 Federal Communications Commission (FCC) Statement This module complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure limits. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 1.2.1.2 End Product Labelling This module is designed to comply with the FCC statement, FCC ID: 2AN5P1531. The host system using this module must display a visible label indicating the following text:
"Contains FCC ID: 2AN5P1531"
Important Notice to OEM Integrators This module is limited to OEM installation ONLY. This module is limited to installation in mobile or fixed applications, according to FCC Part 2.1091(b). The separate approval is required for all other operating configurations, including portable configurations with respect to FCC Part 2.1093 and different antenna configurations For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for additional testing to verify compliance as a composite system. When testing the host device for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance with Part 15 Subpart B while the transmitter module(s) are installed and operating. The modules should be transmitting and the evaluation should confirm that the module's intentional emissions are compliant (i.e. fundamental and out of band emissions). The host manufacturer must verify that there are no additional unintentional emissions other than what is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s). Page 5 KM-153103 Datasheet Antenna Installation The antenna must be installed such that 20 cm is maintained between the antenna and users, The transmitter module may not be co-located with any other transmitter or antenna. The ATN016008LCD2442MA1 antenna with -1.41 dBi gain was verified in the conformity testing. Radiated transmit power must be equal to or lower than that specified in the FCC Grant of Equipment Authorization for FCC ID: 2AN5P1531. A separate approval is required for all other antenna type, or higher gain antenna. In the event that these conditions cannot be met (for example certain laptop configurations or co-
location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. Manual Information to the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Page 6 KM-153103 Datasheet Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator & your body. Page 7 KM-153103 Datasheet Product Selector Model Radio Interfaces Power Package y g r e n E w o L d n a c i s s a C h t o o t e u B l l i F i W n o i t a c i f i l a u Q h t o o t e u B l KM-153103 V4.1 KM-141202 V4.1 x s n o i t c e n n o C f o r e b m u N x a M C 2 I d n a I P S T R A U i s n P O P G I 6-10 6-10 1 1 1 1 21 23 e p y T a n n e t n A I I
. V 3 3
:
y l p p u S r e w o P s l e n n a h C C D A 10 10 i d r a o B r e i r r a C o n u d y e o J x x 1 8 1 0
-
C K t r o p p u S d r a o B r e i r r a C I M W x x 1 8 0 0
-
C K t r o p p u S m m
) H x L x W
(
s n o i s n e m D i i s n P r e d o S l l
) e d I
(
w a r D t n e r r u C
) X T
(
w a r D t n e r r u C
. V 8 1
:
e g a t l o V O
/
I 60mA 90mA 30mA 50mA 32 32 20x34x3 20x30x3.5 Table 1: Product Selector Module Pinouts Figure 2: Module Pinouts Page 8 KM-153103 Datasheet PIN P1 P2 P3 P4 P5 P6 P7 P8 P9 P10 P11 P12 P13 P14 P15 P16 P17 P18 P19 P20 P21 P22 P23 P24 P25 P26 P27 P28 P29 P30 P31 P32 FUNCTION AUD_IN AUD_OUT AUD_CLK AUD_FSYNC JTAG_TMS JTAG _TCK JTAG _TDI JTAG _TDO JTAG _JNRST JTAG _NRST USB_FS_DP USB_FS_DM USB_FS_ID USB_FS_VBUS USB_FS_SOF VBAT GND GND 3V3 3V3 GPIO_1 GPIO_2 SPI1_MOSI SPI1_MISO SPI1_SCK SPI1_NSS I2C1_SMBA I2C1_SCL I2C1_SDA USART1_TX USART1_RX SOURCE/TARGET WL1831 WL1831 WL1831 WL1831 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 Power Supply Power Supply STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 STM32F412 PORT DETAILS AUD_IN (PCM) AUD_OUT (PCM) AUD_CLK (PCM) AUD_FSYNC (PCM) PA13 (JTAG) PA14 (JTAG) PA15 (JTAG) PB3 (JTAG) PB4 (JTAG) NRST (JTAG) PA12 (USB FS/OTG) PA11 (USB FS/OTG) PA10 (USB FS/OTG) PA9 (USB FS/OTG) PA8 (USB FS/OTG) VDD (1V8) VSS (GND) VSS (GND) 3V3 3V3 PB0 (GPIO) PB1 (GPIO) NC PA7 (SPI) PA6 (SPI) PA5 (SPI) PA4 (SPI) PB5 (I2C) PB8 (I2C) PB9 (I2C) PB6 (USART) PB7 (USART) Table 2: Module Pinouts Hardware Interfaces SPI I2C UART PCM GPIO pins ADC channels 1 (4 pins) 1 (3 pins) 1 (2 pins) 1 (4 pins) 16*
6 Page 9 KM-153103 Datasheet Bluetooth Signals Hardware Details WiLink8 Bluetooth module BT EN (Bluetooth Enable) HCI RTS HCI CTS HCI RX HCI TX Microcontroller STM32F412 port PC13 (Output) PA0 PA1 PA2 PA3 Table 3: Bluetooth Signals Hardware Details WiFi Signals Hardware Details WiLink8 WiFi module WL_EN (Wi-Fi Enable) WL_IRQ (Wi-Fi IRQ) SPI MISO SPI CLK SPI MOSI SPI CS Microcontroller STM32F412 port PB2 (Output) PB10 (Interrupt) PB14 PB13 PB15 PB12 Table 4: WiFi Signals Hardware Details Page 10 KM-153103 Datasheet Block Diagram Figure 3: KM-153103 Module Block Diagram Features Wi-Fi & Bluetooth module Wi-Fi standards Wi-Fi bands Wi-Fi roles Wi-Fi maximum throughput Wi-Fi MIMO Bluetooth modes TI WL1831MOD IEEE 802.11a/b/g/n, Wi-Fi Direct Concurrent Operation (Multichannel, Multirole) 2.4 GHz STA, AP, Wi-Fi Direct TCP: 80 Mbps UDP: 100 Mbps 2x2 MIMO V4.1 BR + EDR (Classic Bluetooth with EDR) Page 11 KM-153103 Datasheet Output power Sensitivity Antenna v4.1 LE (Bluetooth Low Energy) Wi-Fi: +17.3 dBm (@ 1 Mbps DSSS) Classic Bluetooth:
BR: +11.7 dBm (GFSK) EDR: +7.2 dBm Bluetooth LE: +7.0 dBm Wi-Fi: -96.3 dBm (@ 1 Mbps DSSS) Classic Bluetooth: -92.2 dBm (GFSK) Bluetooth LE: -92.2 dBm Internal antenna Microcontroller STM32F412CG Core: ARM 32-bit Cortex-M4 Package: UFQFPN48 CPU: 100 MHz SRAM: 256 Kbytes Flash: 1 Mbyte Software Features Embedded software Wi-Fi Security Wi-Fi operational modes Bluetooth Classic Profiles & Protocols ClarinoxBlue Bluetooth Stack ClarinoxBlue Bluetooth Low Energy Stack ClarinoxWiFi WLAN Stack
(all combinations of the above three are possible) Combined IPv4 and limited IPv6 stack Supported Interfaces:
UART I2C SPI USB WEP 64/128 WPA and WPA2 TKIP and AES/CCMP hardware accelerator LEAP, PEAP, EAT-TLS Access Point(AP) mode Station mode P2P (Wi-Fi Direct) Profiles:
AVRCP Controller 1.5 A2DP Source | Sink 1.3 DID 1.3 FTP Client | Server 1.1 GAVDP Initiator | Acceptor | Delay Reporting Initiator 1.3 GOEP 1.1 HDP Source | Sink 1.1 HFP AG | HF 1.7 HID 1.1 General HID Host HSP AG | HS 1.2 Page 12 KM-153103 Datasheet Bluetooth Low Energy Profiles & Protocols IOP MAP 1.1 Messaging Client Equipment (MCE) MPS 1.0 OPP Client | Server 1.1 PAN User PBAP Client 1.2 Report Protocol | HID Device Role 1.1 SPP DevA| DevB 1.2 Protocols:
AVCTP Controller 1.4 AVDTP Source | Sink | Initiator | Acceptor 1.3 BNEP GAP (Generic Access Profile) BR/EDR/LE MCAP Source | Sink OBEX 1.1 OBEX over RFCOMM 1.1 RFCOMM 1.1 SDP (Service Discovery Protocol) Server | Client Profiles:
ANP Server | Client 1.0 BAS Profile over LE BLP Sensor (Server) | Collector (Client) CPP Collector 1.0 CSCP Sensor (Server) | Collector (Client) CTS Profile over LE 1.0 DIS profile over LE 1.1 FMP Target (Server) | Locator (Client) GLP Sensor (Server) | Collector (Client) HIDS Profile over LE HOGP Device (Server) 1.0 HRP Sensor (Server) | Collector (Client) HRS Profile over LE HTP Thermometer (Server) | Collector (Client) LNP Sensor (Server) | Collector (Client) 1.0 PASP Server PXP Reporter (Server) 1.0 RSCP Sensor (Server) TIP Server IAS Profile over LE Protocols:
ATT (Attribute Protocol) Client BPP (Basic Printing Profile) 1.2 Printer | Sender BIP (Basic Imaging Profile) 1.2 Image Push Initiator | Image Push Responder | Image Pull Initiator | Image Pull Responder CTN (Calendar, Tasks and Notes Profile) GAP (Generic Access Profile) BR/EDR/LE GATT (Generic Attribute Profile) over LE Client | Server HCRP (Hardcopy Cable Replacement Profile) 1.2 Page 13 KM-153103 Datasheet Bluetooth Security Max. number of connections Single/Dual processor Approach Simultaneous Wireless usage API Interface Secure Simple Pairing 128-bit AES encryption BLE Secure Connection Wi-Fi 2.4 GHz: Up to 8 connections Classic Bluetooth: Up to 7 connections Bluetooth LE: Up to 10 connections User applications can be implemented on koala connect with Clarinox WiFi / Bluetooth classic and low energy protocol stacks running on the same single CPU. Dual CPU approach is also possible by having Clarinox stacks implemented on koala connect and user application running on a separate CPU. Using Joey in both these approaches enhances IO capability in the system. Classic Bluetooth, Bluetooth Low Energy and Wi-Fi technologies can be used simultaneously and gateway functionality (simultaneous roles) amongst these technologies are possible Host to module connection supports Request-Response based implementation UART, I2C, SPI interfaces supported Applications can be simulated using a desktop environment Supported Wi-Fi modes AP, Station and P2P modes are supported iOS connectivity Simultaneous nodes such as AP and Station are supported iAP & iAP2 Package (Dimensions) Dimensions
(W L H) Weight Mounting 20 mm x 34 mm x 3 mm
< 2.0 g Solder edge pins with castellation (visually inspectable) Environmental Data, Quality & Reliability Operating temperature Storage temperature
-10 C to +60 C
-40 C to +85 C Electrical Characteristics Supply voltage I/O voltage Average Power consumption Idle*
Current draw
(Bluetooth) Bluetooth Stack initialization Searching for devices Current draw (Wi-Fi) WiFi Stack initialization Start interface as Station Idle as Station Connect to Wi-Fi network as Station Start interface as Access Point (AP) 3.3 V 1.8 V 0.15W 33mA 33mA 60mA 90mA 90mA 60mA 110mA 95mA Page 14 KM-153103 Datasheet Idle as Access Point Connect to device as AP 60mA 160mA
*Idle current is measured after Bluetooth is initialized while no any other functions are carried out. The current draw values in above table are the total current drawn by the Joey module when connected to Clarinox Joeyduino Carrier. Applications Internet of Things (IoT) Industrial IoT Health Consumer Electronics, Home Automation, Wearables Industrial Automation Medical/Health devices Pin Compatible Wireless Variants KM-153103-1831 2.4 GHz Wi-Fi and Bluetooth KM-153103-1837 5 GHz and 2.4 GHz Wi-Fi and Bluetooth KM-153103-1801 2.4 GHz Wi-Fi only KM-153103-1807 5 GHz and 2.4 GHz Wi-Fi only Supporting Products Joeyduino Carrier / Breakout Board for Joey modules KC-0181xx KC-0081xx WMI Carrier / Breakout Board for Joey modules KM-9805xx Sensor Board with 9D sensor and haptic driver Page 15 KM-153103 Datasheet Placement Details Figure 4: Placement Details Page 16