all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 4.08 MiB | ||||
1 | Cover Letter(s) | |||||||
1 | Attestation Statements | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | Test Setup Photos | |||||||
1 | Block Diagram | |||||||
1 | ID Label/Location Info | |||||||
1 | ID Label/Location Info | |||||||
1 | Schematics | |||||||
1 | Test Report |
1 | User Manual | Users Manual | 4.08 MiB |
Clarion Owners manual & Installation manual CZ301 CD/USB/MP3/WMA RECEIVER This appliance contains alaser system and is classified as a CALSS 1 LASER PRODUCT". To use this model properly, read this Owners Manual carefully and keep this manual for your future reference. In case of any trouble with this player, please contact your nearest AUTHORIZED service station. To prevent direct exposure to the laser beam, do not try to open the enclosure. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNERS MANUAL MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Denne mezerking er anbragt udvendigt pa apparatet og indikerer, at apparatet arbejder med laserstraler af klasse 1, hvilket betyder, at der anvendes laserstraler af svageste klasse, og at man ikke pa apparatets yderside kan blive udsat for utilladelig kraftig straling. APPARATET BOR KUN ABNES AF FAGFOLK MED S/ERLIGT KENDSKAB TIL APPARATER MED LASERSTRALER!
Indvendigt i apparatet er anbragt den her gengivne advarselsmaekning, som advarer imod at foretage sadanne indgreb i apparatet, at man kan komme til at udsazette sig for laserstraling. Apparaten innehaller laserkomponenten som avger laserstralning 6verstigande gransen for laserklass 1. Suojakoteloa si saa avata. Laite sisaltaa laserdiodin, joka lahettaa nakymatonta silmille vaarallista lasersateilya. wone. CZ301 Clarion 12V GROUND =7= 15A max MW 531-1602kH2 FM 87.5-108MHz ce LW 153-279kHz GLASS 1 LASER PRODUCT This product inludes technology owned by Miciso Corporation and canotbe wed or detibulad witout a Hoense from MSLGP. Prostctice czam 1 Contents Thank you for purchasing this Clarion product. Please fully read this owners manual before operating this equipment. Check the contents of the enclosed warranty card and store it in a safe place with this manual. 1. FEATURES Expanding Systems. 2. PRECAUTIONS INFORMATION FOR USERS:
Front Panel / Generalities. Remove the DCP Attach the DCP. 3. CONTROLS... Operational Panel Names of Buttons 4. CAUTIONS ON HANDLING .. Handling Discs . 5. OPERATIONS Basic Operations. System Setup Audio Setup Radio Operations CD/MP3/WMA Operations USB Operations .. AUX Operations Bluetooth Operation TROUBLE SHOOTING ERROR DISPLAYS. SPECIFICATIONS INSTALLATION / WIRE CONNECTION GUIDE OOHOMNNDAMDTTA ARH POW POND 2 czsam
@ 2ch/2V RCA Output with Subwoofer Control and BEAT-EQ with 3 Band Parametric Equalizer MP3/WMA compatible with ID3-TAG display
@ Built in Bluetooth handsfree (HFP) and audio streaming (A2DP)
@ Front USB GEE Bluetooth Expanding Systems Expanding audio features 2 Channel Amplifier a USB Memory
(Connect by USB Connector with cable.) k ) ey ~ Portable Player
(Connect by AUX IN Jack) Bluetooth cellular phone Note:
The items listed outside of the frames are the commercial products generally sold. czam 3 For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. 1. When the inside of the car is very cold and the player is used soon after switching on the heater, moisture may form on the disc or the optical parts of the player and proper playback may not be possible. If moisture forms on the disc, wipe it off with a soft cloth. If moisture forms on the optical parts of the player, do not use the player for about one hour. The condensation will disappear naturally allowing normal operation. 2. Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip. 3. This unit uses a precision mechanism. Even in the event that trouble arises, never open the case, disassemble the unit, or lubricate the rotating parts. INFORMATION FOR USERS:
Changes or modifications to this product unapproved by the manufacturer will void the warranty and will violate fec approval. Front Panel / Generalities For a longer service life, be sure to read the following cautions. Do not allow any liquids on the set from drinks, umbrellas, etc. Doing so may damage the internal circuitry. Do not disassemble or modify the set in any way. Doing so may result in damage. Do not let cigarettes burn the display. Doing so may damage or deform the body. Ifa problem should occur, have the set inspected at your store of purchase. Cleaning the body Use asoft, dry cloth and gently wipe off the dirt. czam For tough dirt, apply some neutral detergent diluted in water to a soft cloth, wipe off the dirt gently, then wipe again with a dry cloth. Do not use benzene, thinner, car cleaner, etc., as these substances may damage the body or cause the paint to peel. Also, leaving rubber or plastic products in contact with the body for long periods of time may cause stains. USB Port The USB memory stick may stick out when inserted, so it may cause danger during driving. In such cases, you can use acommercial USB extension cable, etc., but use it safely under your own judgment. The USB memory sticks must be recognized as USB mass storage class to work properly. Some models may not operate correctly. When the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage. When using an USB memory stick, we recommend that you backup your data stored on it before by using a personal computer etc. Data files may be broken when using USB memory sticks in the following situation:
When disconnecting the USB memory stick or turning the power off during writing or reading data. When affected by static electricity or electric noise. Connect/disconnect the USB memory stick when itis not accessed. Some USB memory sticks cannot be inserted to the main unit because of their shape. In such cases, use a commercial USB extension cable to connect them.
* Connecting with the computer is not covered. Music files (MP3, WMA, etc.) stored in the USB memory stick cannot be played back. Remove the DCP The control panel can be detached to prevent theft. When detaching the control panel, keep itin the safety place and prevent scratches. We recommend taking the DCP.
(DETACHABLE CONTROL PANEL) with you when leaving the car. 1. Press the [SRC /) ] button (2 sec.) to turn off the power. 2. Deeply push in [OPEN] button to unlock the DCP. 3. Hold the side popped out, remove the DCP. Attach the DCP 1, Hold the DCP and ensure that the panel faces towards you. Set the right side of the DCP into the DCP bracket. 2. Press the left side of the DCP until it locks. Storing the DCP in the DCP Case Hold the DCP, as shown in the figure below, and putit into the supplied DCP case. Note:
If the DCP is dirty, wipe off the dirt with a soft, dry cloth only. AXCAUTION The DCP can easily be damaged by shocks. After removing it, be carefully not to drop it or subject it to strong shocks.
* Once the [OPEN] button is pressed and DCP is unlocked, car vibrations can cause the DGP to fall The connector for the main unit and DCP is extremely important. Be careful not to damage it by pressing on it with fingernails, screwdrivers, etc. Operational Panel
[MENU /e] [PS/AS]
[BAND /1<]/ [SOUND]
[a pm]
[OPEN] [src] [VOLUME]
Names of Buttons
[SRC / ] Button Power/Toggle the audio source
[BAND /] Button
* Select tuner band / Dial / Answer
[MENU / 2] Button
* MP3/WMA mode Search function.
* BT mode Terminate call
* CD mode No function.
* RADIO mode - PTY select.
* AUX mode No function.
[4] Button
* Press to eject disc.
[4 mi] Buttons
* Previous/Next Search
[OPEN] Button
* Unlock the front panel.
[PS/ AS] Button
* Scan play / Preset scan
+ Auto memory store (long press)
[SOUND] Button
* Sound effect setting czam Disc Slot
[1-6]
USB connector
[D]
AUX Jack
[VOLUME] Knob
+ Adjust volume level / Contirm (press)
[TA] Button
* Traffic announcement
[1-6] Buttons
[1] Button:
[2] Button:
[3] Button:
[4] Button:
[5] Button:
[6] Button:
[D] button Display switch
* System setup (long press) Scan play/Preset station 1. Repeat play/Preset station 2. Random play/Preset station 3. Play/Pause/Top play (long press)/Preset station 4. Previous folder/Preset station 5, 10 tracks down (long press) Next folder/Preset station 6. 10 tracks up (long press) Handling Discs Handling New discs may have some roughness around the edges. If such discs are used, the player may not work or the sound may skip. Use a pen or similar tool to remove any roughness from the edge of the disc. Ball-point pen Roughness ~, Never stick labels on the surface of the disc or mark the surface with a pencil or pen. Never play a disc with any cellophane tape or other glue on it or with peeling off marks. If you try to play such a disc, you may not be able to get it back out of the player or it may damage the player. Do not use discs that have large scratches, are misshapen, cracked, etc. Use of such discs may cause misoperation or damage. To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. Do not use commercially available disc protection sheets or discs equipped with stabilizers, etc. These may damage the disc or cause breakdown of the internal mechanism. Storage Do not expose discs to direct sunlight or any heat source. Do not expose discs to excess humidity or dust. Do not expose discs to direct heat from heaters. Cleaning
* Toremove fingermarks and dust, use a soft cloth and wipe in a straight line from the center of the disc to the outer edge.
* Do not use any solvents, such as commercially available cleaners, anti-
static spray, or thinner to clean discs.
* After using special disc cleaner, let the disc dry off well before playing it. On Discs Never turn off the power and remove the unit from the car with a disc loaded. A CAUTION For your safety, the driver should not insert or eject a disc while driving. cz3am 7 Basic Operations Note:
* Refer to the diagrams in 3. CONTROLS when reading this chapter. CAUTION When the unit is turned on, starting and stopping the engine with its volume raised to the maximum level may harm your hearings. Be careful about adjusting the volume. Power on// off Notes:
Start the engine before using this unit. Becareful about using this unit for a long time without running the engine. If you drain the cars battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Start the engine. The power button / knob illumination on the unit will light up. Engine ON position 2. Press the [SRC /@ ] button on the front panel to turn on the power under standby mode. The unit goes back to the last status after power on. 3. Press and hold the [SRC /()] button on the front panel to tun off the power. CT (Clock Time) display
* The displayed clock data is based on the CT (clock time) data in the RDS signal. 8 czsam Volume adjustment Turn the [VOLUME] knob on the front panel. The adjustable range of volume is 0 to 40. Ax CAUTION While driving, keep the volume level at which external sounds can be heard. Playing source selection Press [SRC / ] button on the front panel repeatedly to choose desired playing source. Notes:
. Playing source selection means selecting work mode, such as DISC mode, RADIO mode and AUX mode. Display system time Press the [D] button on the front panel to switch the display information between RDS information, system time and playing source. RESET Press the [OPEN] button on the front panel to unclock the panel and take it off. Then press the [RESET] hole with a thin rod to load the original setting. a El RESET System Setup At all mode, press and hold [ D ] button to enter system setup. Press [ 44, PPI] to select options, rotate the [VOLUME] knob to adjust. AF: ON/OFF Rotate the [VOLUME] knob to choose AF on or off. REG: ON/OFF Rotate the [VOLUME] knob to choose REG on or off. DX/LO (RADIO mode) Rotate the [VOLUME] knob to choose radio local or distant at radio mode. LO: Only stations with strong signal can be received. DX: Stations with strong and weak signals can be received. AUX SENS (AUX mode) Rotate the [VOLUME] knob to choose AUX Input sensitivity LOW, MID or HIGH at AUX mode. AUTO CON: ON/OFF Rotate the [VOLUME] knob to choose AUTO CON ON or OFF. PIN CODE (BT mode) Rotate and press the [VOLUME] knob to choose a 4-digit password. Press the knob more than 2 seconds to confirm. The PIN CODE default setting is 0000 *. Audio Setup Press the [SOUND] button to enter sound effect setting mode. First Press shows current EQ. Rotate the [VOLUME] knob to changes BEAT EQ in this order:
OFF -> B-BOOST -> IMPACT -> EXCITE ->
CUSTOM Press the [SOUND] button, then press [44 , PPI] to select USER preset including:
SCRN SVR: ON/OFF Rotate the [VOLUME] knob to choose SCRN SVR (screen saver) ON or OFF. SCROLL: ON/OFF For track information that is longer than the display panel:
When SCROLL is ON, the LCD will display ID3 TAG information cyclely, e.g: TRACK-
>FOLDER->FILE->ALBUM->TITLE-
>ARTIST->TRACK->... When SCROLL is OFF, the LCD will display one of the ID3 TAG information, the default is TRACK, but user can adjust it to other ID3 TAG information by press [DISP] button. DIMMER: ON/OFF Rotate the [VOLUME] knob to choose DIMMER ON or OFF. ON: LCD dimmeris active when small light of vehicle is turned ON. OFF:LCD always maximum brightness regardless of the vehicle small light. REAR/S-W Rotate the [VOLUME] knob to choose REAR or SUB-WOOFER. BEEP: ON/OFF Rotate the [VOLUME] knob to choose button beep sound ON or OFF. BALANCE -> FADER -> M-B EX -> LPF(low pass filter) -> S-W VOL (Subwoofer Volume), rotate the [VOLUME] knob to select a value. BALANCE:LEFT 1-7->CENTER->RIGHT 1-7 FADER:FRONT 1-7->CENTER->REAR 1-7 M-BEX: ON/OFF LPF: THROUGH/80/1 20/160. SUBW VOL: (-6)-(+6) czam Radio Operations Select tuner as playing source Press [SRC / ] button once or more to enter RADIO mode. Select one radio band Press the [BAND] button on the panel to select one radio band among FM1, FM2, FM3, MW and LW. Manual tuning During manual tuning, the frequency will be changed in steps. Press the [ kd<@ ]/[ PI] buttons on the panel to tune in a higher / lower station. Auto tuning Press and hold the [ kt ]/[ PHI] buttons on the panel to seek a higher / lower station. To stop searching, repeat the operation above or press other buttons having radio functions. Preset scan Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory. 1. Press the [PS/AS] button. 2. When a desired station is tuned in, press the [PS/AS] button again to continue receiving that station. Note:
Be careful not to press and hold the
[PS/AS] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations. 10 czam Auto store Only stations with sufficient signal strength will be detected and stored in the memory. Press and hold the [PS/AS] button (2 sec.) to start automatic station search. To stop auto store, press other buttons having radio functions. Notes:
1. After auto store, the previous stored stations will be overwritten. 2. The unit has 5 bands, such as FM1, FM2, FM3, MW and LW. FM3, MW and LW can store by AS function. Each bands can store 6 stations, CZ301E can store 30 stations in total. Manual store When one expected radio station has been detected, press and hold number button 1~6 to store itin the memory. Recall the stored stations Press one numeric button among 1 to 6 on the panel to select the corresponding stored station. Local seeking When LOCAL seeking is on, only those radio stations with strong radio signal could be received. To open or close LOCAL function, press and hold the [ D ] button on the front panel, then press [ 1] button repeatedly until LO or DX displays on the screen, and rotate the
[VOLUME] knob to select Local or Distant mode. Note:
The number of radio stations that can be received will decrease after the local seeking mode is on. CD/VMIP3/WMA Operations This unit can play back MP3/
WMA files Notes:
if you play a WMA file with active DRM
{Digital Rights Management), no audio is output (The WMA indicator blinks). To disable DRM
(Digital Rights Management) When using Windows Media Player 9/10/11, click on TOOL -> OPTIONS -> COPY MUSIC tab, then under COPY SETTINGS, unclick the Check box for COPY PROTECT MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. Precautions when creating MP3/
WMA file Usable sampling rates and bit rates 1. MP3: Sampling rate 8 KHz-48 kHz, Bit rate 8 kbps-320 kbps / VBR 2. WMA: Bit rate 8 kbps-320 kbps File extensions 1. Always add a file extension .MP3, WMA to MP3, WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. 2. Files without MP3/WMA data will not play. The files will be played soundlessly if you attempt to play files without MP3/WMA data.
* When VBR files are played, the play time display may differ the play location.
* When MP3/WMA files are played, a little no sound part is caused between tunes. Logical format (File system) 1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select
|SO9660 level 1, 2 or JOLIET or ROMEO or APPLE ISO as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3/WMA play but the title must be within 32 single byte alphabetical letters and numerals
(including an extension). 3. Do not affix a name to a file inside a folder having the same name. Folder structure A disc with a folder having more than 8 hierarchical levels will be impossible. Number of files or folders 1. Up to 3000 files can be recognized per folder. Up to 3000 files can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks may not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording. Eject function Just pressing the [ 4] button, ejects the disc even if the power to the unit was not turned on. Notes:
If you force a CD into before auto reloading, this can damage the CD. IfaCD (12 cm) is left ejected for 15 seconds, the CD is automatically reloaded
(Auto reload). Listening to a disc already loaded in the unit Press the [SRC / ()] button to select the CD/
MP3/WMA mode. When the unit enters the CD/MP3/WMA mode, play starts automatically. Loading a CD Insert a CD into the center of the CD SLOT with facing up. The CD plays automatically after loading. Notes:
Never insert foreign objects into the CD SLOT. Ifthe CD is not inserted easily, there may be another CD in the mechanism or the czam 1 CD/VMIP3/WMA Operations unit may require service. Discs without the gee or mark and CD-ROMs cannot be played by this unit. Some CD-R/CD-RW disc may not be usable. Pausing play 1. Press the [ 4] button to pause play. PAUSE appears in the display. 2. To resume CD play, press the [ 4 ] button again. Displaying CD titles This unit can display title data for MP3/WMA disc. When SCROLL is OFF, each time you press the [D] button to change the title display. MP3/WMA disc Track -> Folder -> File title -> Album -> Title
-> Artist -> Track ... Notes:
If MP3/WMA disc is not input TAG, NO TITLE appears in the display. Only ASCII characters can be displayed in Tags. Selecting a track Track-up 1. Press the [ PPI] button to move ahead to the beginning of the next track. 2. Each time you press the [ PPI] button, the track advances ahead to the beginning of the next track. 3. For MP3/WMA disc, press and hold the
[ 6] button (2 sec.) to move ahead to +10 tracks. Track-down 1. Press the [ H4] button to move back to the beginning of the current track. 2. Press the [ M4] button twice to move back to the beginning of the previous track. 3. For MP3/WMA disc, press and hold the [ 5]
button (2 sec.) to move back to -10 tracks. 12 cz3am Fast-forward/Fast-reverse Fast-forward Press and hold the [PPI] button . Fast-reverse Press and hold the [ M4] button .
* For MP3/WMA discs, it takes some time until the start of searching and between tracks. In addition, some error may occur in the play time. Folder Select This function allows you to select a folder containing MP3/WMA files and start playing from the first track in the folder. 1. Press the [ 5] or [ 6] button. Press the [ 6] button to move the next folder. Press the [ 5] button to move the previous folder. 2. To select a track, press the [ He@] or [ PPI]
button. Top function The top function resets the CD player to the first track of the disc. Press and hold the [ 4]
button (2 sec.) to play the first track (track No. 1) on the disc.
* In case of MP3/WMA, the first track of the current folder will be played. Other various play functions Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc. Press the [ 1 ] button to perform scan play. Repeat play This function allows you to play the current track repeatedly or play a track currently being played in the MP3/WMA folder repeatedly. CD:
1. Press the [ 3] button once or more until RPT ON appears on the LCD to perform repeat play. 2. Press [ 3] button again to cancel repeat playback, RPT OFF appears on the LCD. CD/VMIP3/WMA Operations MP3/WMA:
1. Press the [ 2 ] button once or more until TRACK RPT appears on the display to perform repeat play, and" RPT segment lights on. 2. For MP3/WMA files, press [ 2] button repeatedly until FOLDER RPT appears on the display for folder repeat play. 3. Press [ 2 ] button repeatedly until RPT OFF appears on the display to cancel USB Operations 1. Push the cap of the USB connector to the right. Insert a USB cable (CCA-XXxX) into the USB connector. Insert a USB device into the USB cable. When connecting a USB device, the unit will read the files automatically. 2. To remove the USB device, you should first select another source, in order to avoid damaging the USB device. Then take off the USB device. Push the cap to the left. 3.Operation is same as MP3/WMA operation. AUX Operations repeat playback, andRPT segment goes off. Random play This function allows you to play all tracks recorded on a disc in a random order. Press the [ 3] button to perform random play. Random function active when jumping to another track. Press [SRC / (] button on the panel or remote control to select AUX. AUX is just for Audio content with 3.5mm Jack connector plugged into audio-in socket on the front panel. AUX Input sensitivity setting 1. Press and hold the [ D ] button (2 sec.). 2. Turn the [VOLUME] knob to select AUX SENS. 3. If the output level of connected external audio player is HIGH, rotate [VOLUME] knob and choose LOW. And if the output level is LOW choose HIGH. cz3am PTs eet 13 Bluetooth Operations The Bluetooth allows you to utilize your car's built-in audio system for wireless mobile phone or music handsfree communication. Some Bluetooth mobile phones have the audio features, and some portable audio players support Bluetooth feature. This system can play audio data stored in a Bluetooth audio device. The car stereo with Bluetooth installed will be able to retrieve phonebook contacts, received call, dialed call, missed call, incoming calls, outgoing call and listen to music. Note:
Ifleave itin the places subjected to direct sun, high temperature can cause distortion, discoloration which may result in a malfunction. This system will not operate or may operate improperly with some Bluetooth audio players. Clarion cannot guarantee the compatibility of all mobile phones together with CZ301E. Audio playback will be set to the same volume level as set during telephone call. This might cause problems, if extreme volume level is set during telephone call. Handsfree Operations Pairing 1. Turn on Bluetooth function of your mobile phone. 2. Enter mobile phones Bluetooth setup menu. 3. Search for new Buetooth devices. 4. Select CZ301E from the pairing list on the mobile phone. 5. Enter 0000 as the password (The password default setting is 0000). 6. After pairing successfully, the unit will enter Bluetooth mode automatically, and CONNECTED will appear on the LCD. 14 czam Make a call Direct Number Call Press the [BAND /'] button select DIAL NUM. 1. Press the [BAND /E] button. 2. Press the [VOLUME] knob on the front panel or press the [| w]/[a]
buttons on the remote control to switch:
SIM, DIAL, DIALLED , MISSED, RECEIVED, MEMORY . 3. Press the [VOLUME] knob to confirm the selection, WAITTING will appear on the LcD. 4. Press the [BAND /I] to dial. 5, Press [MENU /@!] to terminate call. Operation from Bluetooth menu Press the [SRC / ] button to switch the source to BLUETOOTH. Press [MENU /2]
button to select a way to make outgoing call:
Dial Number Same operation as Direct Number Call. Dialled/Missed/ Received Call History You can search any Dialled/Missed/Received Call History. 1. Rotate the knob to select DIALLED, MISSED or RECEIVED. 2. Press the knob to enter the selected call history. 3. Use the [w]/|[ a] buttons on the remote control or rotate the knob to scroll the contacts. 4. When the contact name or mobile phone No. is displayed, press the [BAND /']
button to call the mobile phone No. of that contact.
* Press the [MENU / 1] button to end the call. Bluetooth Operations
* Call from Phonebook User can search the contact name in the phonebook and make call. 1. Rotate the knob to select SIM, DIAL, DIALLED , MISSED, RECEIVED, MEMORY. 2. Press the [VOLUME] knob to enter the selected phonebook. 3. Use the ['w ]/| #] buttons on the remote control or rotate the [VOLUME] knob to scroll the contacts. 4. When the contact name is displayed, press the [BAND /!] button to call the mobile phone No. of that contact.
* Press the [MENU / G1] button to end the call. Answering a call You can answer an incoming call by pressing the [BAND /I] button
* Press the [MENU / 2] button to reject an incoming call. Audio Streaming Operations What is audio streaming?
Audio streaming is a technique for transferring audio data such that it can be processed as a steady and continuous stream. Users can stream music from their external audio player to their car stereo wirelessly and listen to the tracks through the cars speakers. Please consult your nearest Clarion dealer for more information on the product of wireless audio streaming transmitter offered. CAUTION Please avoid operating your connected mobile phone while audio streaming as this may cause noise or sound choppy on the song playback. Audio streaming may or may not resume after telephone interrupt as this is dependent on mobile phone. System will always return to Radio mode if audio streaming is disconnected. m a Note: 2 Be sure to read the chapter Pairing before S$
proceeding. Play / Pause a track 1. Push the [ 4] button to pause audio playback. 2. To resume audio playback, push the [ 4]
knob again. Selecting a track Track-up 1. Press the [ PPI] button to move to the beginning of the next track. 2, Each time the [> ] button is pressed, playback proceeds to another track in the advancing direction. Track-down 1. Press the [#4] button to move the to beginning of the previous track. 2, Each time the [4] button is pressed, playback proceeds to previous track in the reverse direction. Note:
Playing order will depend on Bluetooth audio player. When [4] button is pressed, some A2DP devices will restart the current track depends on the duration of playback. During music streaming playback, A2DP will be shown on the display. Information about tracks (e.g. the elapsed playtime, song title, etc.) cannot be displayed on this unit. When A2DP device is disconnected, BT DISCONNECT will be shown on the display and return to previously selected audio source. Some Bluetooth audio players may not have play / pause synchronized with this unit. Please make sure both device and main unit are in the same play / pause status in BT MUSIC mode. cz3am 15 Unit fuse blown. Replace with new fuse of correct rating. Car battery fuse blown. Replace with new fuse of correct rating. The microprocessor has malfunctioned due to noise, etc. Turn off the power and open the operation panel. Press the reset button with a thin rod. Note:
When the Reset button is pressed, turn off the ACC power.*
"When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared. Battery depleted. Change the battery. Battery installed incorrectly, Install the battery correctly. Improper audio output connection. Check wiring and correct. Volume set too low. Increase volume level. Speakers damaged. Replace speakers. Heavily biased volume balance. Adjust the channel balance to center position. Speaker wiring is in contact with metal part of car. Insulate all speaker wiring connections. Non-standard disc used. Use astandard disc. Speaker power rating does not match unit. Replace speakers. Wrong connections. Check wiring and correct. Speaker is shorted. Check wiring and correct. MUTE wire is grounded. Check the MUTE wiring and correct. Incorrect connection between ACC:
and Battery. Another disc is already loaded. Check wiring and correct. Eject the disc before loading the new one. the unit. There is an object install inside Remove the object inside the unit. Compact disc is dirty. Clean the compact disc with a soft cloth. Sound skips or is HOISy warped. Compact disc is heavily scratched or |Replace with a compact disc with no scratches. Sound is bad when power is first |internal lens when the car is parked in a humid place. Condensation may form on the Let dry for about 1 hour with power on. USB Devices Problem The USB device has been Reversing the connection direction of the USB USB device cannot _ [inserted with wrong direction. device, try it again. be inserted, The USB connector is broken. Replace with a new USB device. fa de The USB device is damaged. Disconnect the USB device and reconnect. If the USB device is not cas Be aeeaie + *
ized device is still not recognized, try replacing with a peresee Connectors are loose: different USB device. INo MP3/WMA file is stored in the 4 P USB device. Store these tiles properly in the USB device.
[Sound skips or is MP3/WMA files are not encoded Use MP3AWMA files encoded properly. noisy. properly. lf an error occurs, one of the following displays is displayed. Take the measures described below to solve the problem. Eject the disc then reload it properly. Try another disc. This is a failure of decks mechanism. Consult your store of purchase. If an error display other than the ones described above appears, press the Reset button. If the problem persists, turn off the power and consult your store of purchase.
* When the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared. czam 17 PTs eet FM Tuner Frequency range: 87.5-108.0MHz Usable sensitivity: 8dBy Frequency response: 30Hz-15kHz Stereo separation: 30dB(1kHz) Signal/noise ratio: >55dB MW Tuner Frequency range: 531-1602kHz Usable sensitivity (S/N=20dB): 30dBy LW Tuner Frequency range: 153-279kHz Usable sensitivity (S/N=20dB): 30dBy CD Player System: Disc digital audio system Frequency response: 20Hz-20kHz Signal/noise ratio: >75dB Total harmonic distortion: Less than 0.1% (1kHz) Channel separation: >60dB MP3/WMA mode MP3 sampling rate: 8 kHz to 48 kHz MP3 bit rate: 48 kbps to 320 kbps / VBR. WMA bit rate: 48 kbps to 320 kbps Logical format: ISO9660 level 12 JOLIET or ROMEO file system USB Specification: USB 1.0/2.0 Playable audio format:
MP3(.mp3): MPEG 1/2/Audio Layer-3 WMA(.wma): Ver 7/8/9.1/9.2 Audio Amplifier Maximum power output:
180W (45W x 4) Speaker impedance: 4Q (4to 8 Q allowable) 18 czam Input Audio input sensitivity:
High: 320mV (at 1V output) Mid: 650mV (at 1V output) Low: 1.3V (at 1V output)
(input impedance 10 1Q or greater) Aux-in level: <2V General Power supply voltage:
14.4VDC (10.8 to 15.6V allowable), negative ground Pre-Amp output voltage:
2.0V (CD play mode: ikHz, 0dB, 10kQ load) Fuse: 154 Dimensions of the Main Unit:
188mm Width x 58mm Height x 190mm Depth Weight of the Main Unit: 1.35kg z 178mm. 50mm bent
& g|
& 8 3 =
J J SP 470mm E 46mm __.l = |e 188mm 58mm Notes:
Specifications comply with JEITA Standards. Specifications and design are subject to change without notice for further improvement. CONTENTS 1) Before Starting... eee
) 2) Package Contents.... 3) General Cautions... 4) Cautions on Installation. 5) Installing the Source Unit 6) Removing the Source Unit 7) Wiring and Connections...
) 8) Connecting the Accessories............ 1) Before Starting 1. This set is exclusively for use in cars with a negative ground 12 V power supply. 2. Read these instructions carefully. 8. Be sure to disconnect the battery terminal before starting. This is to prevent short circuits during installation. (Figure 1) 2) Package Contents Source unit . Front panel . Trim ring Mounting bracket.. Screws MSx6 mm. Phe teh, 3) General Cautions 1. Do not open the case. There are no user serviceable parts inside. If you drop anything into the unit during installation, consult your dealer or an authorized Clarion service center. Wire connector Owner's manual... Warranty Card... cccecsseeesesteereenreees 1 2. Use a soft, dry cloth to clean the case. Never use a rough cloth, thinner, benzine, or alcohol etc. For tough dirt, apply a little cold or warm water to a soft cloth and wipe off the dirt gently. cz3am 19 ima}
I 23
a 4) Cautions on Installation 1. Prepare all articles necessary for your car dealer beforehand. installing the source unit before 4. Use the enclosed screws for starting. installation. 2. Install the unit within 30 of the Using other screws can cause horizontal plane. (Figure 2) damage. 3. If you have to do any work on the car (Figure 3) body, such as drilling holes, consult Chassis Chassis Damage Max 30 Max. 6 mm (M5 screw) Figure 2 Figure 3 5) Installing the Source Unit 1. Place the mounting bracket into the instrument panel, use a screwdriver to bend each stopper of the mounting bracket inward, then secure the stopper. 2. Wire as shown in Section 7) 3. Insert the source unit into the mounting bracket until it locks. 4. Take care of the top and bottom of the trim ring and mount it so that all the hooks are locked. Notes:
1. Some car models require special mounting kits for proper installation. Consult your Clarion dealer for details. 2. Fasten the front stopper securely to prevent the source unit from coming loose.
* Console opening dimensions 7-3/16"
(182 mm) Hole Sle NS 20 czam Notes of installation 1. Before installation, please make sure proper connections are conducted and the unit operates normally. Improper connection may resultin damage to the unit. 2. Use only accessories designed and manufactured for this unit and other unauthorized accessories may result in damage to the unit. 3. Before installation, please fasten all power cables. 4. DO NOT install the unit in the place where close to hot area to prevent damage to electrical components such as the laser head. 5. Install the unit horizontally. Installing the unit more than 30 degree vertically may pole. 7. DO NOT block the cooling fan exit to ensure sufficient heating dissipation of this unit, or it may result in damage to this unit. Unit Installation Method A 1. Insert mounting bracket into dash board, choose appropriate mounting tab according to the gap width, bending the mounting tab outwards with a screwdriver to fix the mounting bracket in place. 2. Screw in 1 piece of M4x42 to the hole of the unit back and put on arubber cap over the screw. (see picture below) 3. Slide the unit into the bracket until you hear result in worse performance. aclick sound. 6. To prevent electric spark, connect the positive pole first and then the negative Screwdriver Dashboard gs Ser"
Mountirig Bracket Rubber cap Special Screw (M4x42) czam 21 Method B 6) Removing the Source Unit Disassemble trim ring 1. Push the trim ring to right and pull out the right part. ay 2. Push the trim ring to left and pull out the left part. ow Mounting Frame | Dashboard %
1. Insert this unit directly to the opening of the Disassemble the unit dashboard. 1. Switch off the power. 2. Place M5x6 cylindrical screw through the 2. Remove the panel holes of the mounting frame located inside 3. Remove the trim ring. the opening to holes of the unit and fasten 4, Insert the removal keys straight back until the screws to left & right. they lock, then pull the unit out. Trim ring installation Attach the trim ring around the front panel. 2 5. Disconnect all the wires. 22 czam 7) Wiring and Connections Microphone Steering wheel control terminal VTS eet White Rear audio output (Left)/
Subwoofer output 1 Black Red go Rear audio output (Right)/
Black Black
a Black Black Ce g Subwoofer output 2 , 2 Channel Amplitier oa
{Black}
Antenna Refer to next page_ cz3am 923 Rear right -
Front right Frontleft +
Rearlett+
(AMF Remote) AGO +
Ground G4 Rear right +
Front right Front left -
Riear left -
Tlumniriations Phone Wute Batley +
Function Location Connector A Connector B 41 Rear right (+) / Purple 2 Rear right (-) / Purple with black stripe 3 Front right (+) / Grey 4 Battery 12V(4) / Yellow Front right (-) / Grey with black stripe 5 Remote On / Blue with white stripe Front left (+) / White 6 Illumination / Orange with white stripe | Front left (-) / White with black stripe 7 ACC+/Red Rear left (+) / Green
\ 8 Ground / Black Rear left (-) / Green with black stripe For VW and Audi: Change wiring like above. 8) Connecting the Accessories
* Connecting to the external amplifier External amplifiers can be connected to the 2 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the unit. 24 czam FCC warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* Reorient or relocate the receiving antenna.
* Increase the separation between the equipment and receiver.
* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* Consult the dealer or an experienced radio/TV technician for help This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC. Changes or modifications not expressly approved by the party responsible for compliance. could void the user's authority to operate the equipment. Clarion Europe S.A.S. Z.I. du Pr a Varois, Route de Pompey, 54670 Custines, FRANCE telephone: +(33)3-83-49-4400 facsimile: +(33)3-83-49-4421 Clarion Co., Ltd. All Rights Reserved. Copyright 2010: Clarion Co., Ltd. Pi pri Gedruckt in China China Tryckt i Kina ach f Extup@@nke stnv Kiva PN: 127075002844
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2010-09-13 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2010-09-13
|
||||
1 | Applicant's complete, legal business name |
Clarion Co Ltd
|
||||
1 | FCC Registration Number (FRN) |
0012512836
|
||||
1 | Physical Address |
7-2 Shintoshin, Chuo-ku
|
||||
1 |
Saitama-shi, Saitama, N/A 330-0081
|
|||||
1 |
Japan
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
AX2
|
||||
1 | Equipment Product Code |
CZ301
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** S******
|
||||
1 | Telephone Number |
81-48********
|
||||
1 | Fax Number |
81-48********
|
||||
1 |
M******@clarion.co.jp
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Car CD Player | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Listed Power is Max conducted RF output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Professional Installation is required, installer must be provided with transmitter operation conditions for satisfying RF exposure compliance | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
EMTEK (DONGGUAN) CO.,LTD
|
||||
1 | Name |
S**** L********
|
||||
1 | Telephone Number |
86-76********
|
||||
1 | Fax Number |
86-76********
|
||||
1 |
s******@emtek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0007000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC