all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Users Manual | Users Manual | 1.29 MiB | April 07 2018 | |||
1 | Cover Letter(s) | April 07 2018 | ||||||
1 | External Photos | April 07 2018 | ||||||
1 | Internal Photos | April 07 2018 | ||||||
1 | Cover Letter(s) | April 07 2018 | ||||||
1 | ID Label/Location Info | April 07 2018 | ||||||
1 | RF Exposure Info | April 07 2018 | ||||||
1 | Test Report | April 07 2018 | ||||||
1 | Test Setup Photos | April 07 2018 |
1 | Users Manual | Users Manual | 1.29 MiB | April 07 2018 |
Model No. PJ-4605 E n g l i s h 1 Thank you for purchasing this Clarion product. Please read this owners manual in its entirety before operating this equipment. After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). Check the contents of the enclosed warranty card and keep it carefully with this manual. Contents 1. FEATURES 3 Expanding Systems 3 2. PRECAUTIONS 4 Operational Panel 6 4. OPERATIONS 9 Basic Operations 9 Sound Setup 11 System Setup 13 Radio Operations 15 CD/MP3/WMA Operations 16 USB Operations 18 Bluetooth Operations 19 AUX Operations 21 5. TROUBLESHOOTING 22 6. ERROR DISPLAYS 25 7. SPECIFICATIONS 26 2 English 1. FEATURES Built in Bluetooth handsfree (HFP) and audio streaming (A2DP & AVRCP) Sound Quality Correction by Intelligent Tune Expanding Systems Expanding audio features 4 Chanel Amplifier USB Memory Portable Player
(Connect via AUX IN Jack) Bluetooth cellular phone Note:
The items listed only show connectivity options and are not included with the unit. 3 English 2. PRECAUTIONS WARNING For your safety, the driver should not operate the controls while driving. Also, while driving, keep the volume to a level at which external sounds can be heard. INFORMATION FOR USERS:
This unit is applicable for on-road 4 wheel vehicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate. CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANUFACTURER WILL VOID THE WARRANTY. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Handling Compact Discs Compared to ordinary music CDs, CD-R and CD-RW discs are both easily affected by high temperature and humidity and some of CD-Rand CD-RW discs may not be played. Therefore, do not leave them for a long time in the car. Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen. Display Screen In extremely cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. About the registered marks, etc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Clarion Co.,Ltd. is under license. Other trademarks and trade names are those of their respective owners. USB Connector The USB memory stick may stick out when inserted, so it may cause danger during driving. When connect USB memory stick to the main unit, please use a USB extension cable
(CCA-755, sold separately). The USB memory sticks must be recognized as USB mass storage class to work properly. Some models may not operate correctly. When the memorized data is lost or damaged by any chance, Clarion shall not be liable for any damage. When using the USB memory stick, we recommend that you backup your data stored on it before using a personal computer etc. Data files may be broken when using USB memory sticks in the following situation:
When disconnecting the USB memory stick or turning the power off during reading data. When affected by static electricity or electric noise. Connect/disconnect the USB memory stick when it is not accessed. Connecting with the computer is not covered. 4 English 3. CONTROLS Operational Panel 9 8 CD Slot USB Connector 7 Microphone 0 !
@
#
654321 Display Screen AUX Input Jack 9 8 0 !
@
#
654321 5 English Functions Short press Radio-Preset station 1~6 Long Press Radio-Store stations in memory Short press MP3/WMA/USB-Folder up/ Folder down Short press MP3/WMA/USB- Browsing function Short press CD/MP3/WMA/USB-Random play Short press CD/MP3/WMA/USB-Scan play Short press CD/MP3/WMA/USB-Repeat play Short press Eject disc Long Press Full eject disc Short press Radio-Change bands. CD/MP3/WMA/USB/BT Audio-Play/pause Long Press Radio-Band scan Short press Switch source mode Long Press Power off Names of Buttons No. Name 1~6 [1]~[6]
1~2 [1]~[2]
3 4 5 6 7 8 9 0
[3]
[4]
[5]
[6]
[Q]
[BND]
[SRC]
[x]
[v]
Short press Long Press Items switching Radio-Tune up/down CD/MP3/WMA/USB/BT Audio-Track up/down Items switching Radio-Auto seek up/down CD/MP3/WMA/USB/BT Audio-Fast-forward / fast-
reverse Back to the previous layer CD/MP3/WMA/USB/BT Audio-Switch display TEL interrupt -Answer a call Sound setup TEL interrupt -Reject a call
!
[DISP]
Short press
@
[
]
Short press
# [ROTARY]
Long Press System setup Adjust volume Items switching Rotate Short Press Mute on/off Long Press Confirm selection 6 English 4. OPERATIONS Notes:
Be sure to read this chapter referring to the front diagrams of chapter Operational pannel on page 5. If the sound becomes distorted it will be the result of the selected combination of sound adjustment settings such as, Virtual Bass, Sound Restorer, Dynamic Beat Enhancer, Bass/
Treble and Graphic Equalizer. In such an event please lower the level of effect. Basic Operations CAUTION Be sure to lower the volume before switching off the unit power or the ignition key. The unit remembers its last volume setting. Power on/off Notes:
Start the engine before using this unit. Be careful about using this unit for a long time without running the engine. If you drain the battery too far, you may not be able to start the engine and this can reduce the service life of the battery. 1. Press any button(except [Q] button) to turn on the power. 2. Long press [SRC] button to turn off the power. Selecting a source mode 1. Press [SRC] button to change the Title Scroll 1. Long press [DISP] button while in title display. The title will scroll 1 time. Back Function You can press [DISP] button to return to the previous layer while in menu operations. Clock Setup 1. Press [DISP] button to switch to the clock display. 2. Press and hold [DISP] button. 3. Turn [ROTARY] knob to select the item
"SET CLOCK", and press [ROTARY]
knob. SET CLOCK SET ALARM 4. Press [x] or [v] button to select hour or minute. 5. Turn [ROTARY] knob to set the correct operation mode. TUNER DISC*
USB*
BT AUDIO time. BT-TEL*
AUX TUNER...
* When disc is not loaded, USB device is not connected, or Bluetooth device is not paired, the related source mode will be skipped. Adjusting the Volume 1. Turning [ROTARY] knob to adjust the volume. The volume level is from 0 to 40. Mute 1. Press [ROTARY] knob to turn mute on or off. The clock is displayed in 12-hour format. 6. Press [ROTARY] knob to complete setting. Note:
You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the cars battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock setup mode is canceled. 7 English Basic Operations Alarm Setup 1. Press [DISP] button to switch to the clock display. 2. Press and hold [DISP] button. 3. Then press [x] or [v] button to select the item "SET ALARM", and press [ROTARY] knob. SET CLOCK SET ALARM 4. Turn [ROTARY] knob to switch between
"ON" and "OFF". ON: Turn on the alarm. OFF: Turn off the alarm. If you want to set alarm, you should switch to "ON" and press [ROTARY]
knob. Then do the next operations. 5. Press [x] or [v] button to select hour or minute. 6. Turn [ROTARY] knob to set the correct time. The clock is displayed in 12-hour format. 7. Press [ROTARY] knob to complete setting. 8 English Sound Setup You can adjust a sound effect or tone quality to your preference. 1. Press [
2. Then press [x] or [v] button to
] button. select the sound setup item:
G-EQ *1 BASS *2 TREB *2 FAD INTEL-TUNE BAL LOUD Notes:
*1 This item can be performed only when the system item EQ-SELECT is set to G EQ(page 11).
*2 These items can be performed only when the system item EQ-SELECT is set to BASS/TREB(page 11). You should press [ROTARY] knob to adjust the setting for these items. G-EQ (Graphic Equalizer): select the desired audio effect in preset memory BAL (Balance): balance of the right and left speakers FAD (Fader): balance of the rear and front speakers INTEL- TUNE (Intelligent Tune):
Clarions sound technology developed for turning the car interior into a wonderful listening environment LOUD (Loudness): bass or treble emphasized 3. Turn [ROTARY] knob to adjust the value. G-EQ: detailed operations are below BASS / TREB: -15 ~ +15 (default: 0) BAL: L7 ~ R7 (default: 0) FAD: R7 ~ F7 (default: 0) INTEL- TUNE: detailed operations are below LOUD: ON/OFF (default: OFF) 4. After completing settings, press [
]
button to return to the previous mode. Notes:
During BASS/TREB/BAL/FAD setup, if no operation is performed for more than 10 seconds, this mode can be stored in memory and return to previous mode. Setting Graphic Equalizer This unit is provided with 9 types of sound quality effects stored in memory. Select the one you prefer. The factory default setting is OFF. 1. Select G-EQ in audio items, and press
[ROTARY] knob. 2. Turn [ROTARY] knob, select a tone effect. OFF HIGH BOOST NATURAL CUSTOM BASS BOOST VOCAL USER 1 IMPACT USER 2 USER 3 OFF: flat CUSTOM: user custom temporarily BASS BOOST: bass emphasized HIGH BOOST: mid and treble emphasized VOCAL: mid emphasized IMPACT: bass and treble emphasized NATUAL: calm and moist USER 1/2/3: user custom Setting preferred sound quality effects 1. Select BASS BOOST/HIGH BOOST/
VOCAL/IMPACT/NATURAL/USER 1/USER 2/USER 3, and press
[ROTARY] knob. 2. Press [x] or [v] button to select a frequency. 3. Turn [ROTARY] knob to change the setting: 6 ~ +6 4. Long press [1]~[3] button to store the setting into USER 1 ~USER 3 memory. Note:
If you do not perform storing as step 4 when you select BASS BOOST/HIGH BOOST/VOCAL/IMPACT/NATURAL , the setting will be stored in CUSTOM temporarily. 9 English Sound Setup Setting Intelligent Tune 1. Select INTEL- TUNE in audio items, and press [ROTARY] knob. 2. Press [x] or [v] button, the tone effect changes. S-RESTORER D-BEAT S-RESTORER (Sound Restorer):
V-BASS full quality sound reproduction of compressed audio data (default:
OFF) V-BASS (Virtual Bass): delivers powerful lows just like an add-on subwoofer (default: OFF) D-BEAT (Dynamic Beat Enhancer):
(default: OFF) 3. Press [ROTARY] knob. 4. Turn [ROTARY] knob to adjust the value. S-RESTORER/V-BASS/D-BEAT: OFF/
LOW/MID/HIGH. 10 English System Setup 1. Long press [
] button. 2. Then press [x] or [v] button to select the system setup items:
AUTO STORE DX/LO AUX SENS BT SELECT BT DISCON BT DELETE A-ANSWER A-CONNECT TEL MEMORY PIN CODE DIMMER RESET BT SELECT: select paired device to BEEP EQ-SELECT connnet BT DELETE: delete paired device BT DISCON: disconnect device A-ANSWER: auto answer A-CONNECT: auto connect TEL MEMORY: priority for phonebook download DIMMER: dimmer control BEEP: button beep sound EQ-SELECT: select rear or subwoofer RESET: memory reset These items are setting for the different source mode. The detailed operations please follow the following source mode operations chapter. 3. Turn [ROTARY] knob to adjust the setting. BT SELECT/BT DELETE/BT DISCON/A-ANSWER/A-CONNECT:
detailed operations are below DIMMER: ON/OFF (default: ON) BEEP: TYPE-A/TYPE-B/OFF
(default: TYPE-A) EQ-SELECT: G-EQ, BASS/TREBLE
(default: G-EQ) RESET: detailed operations are below 4. After completing settings, press [DISP]
button to return to the previous mode. Note:
You can press [DISP] button to return to the previous layer duiring operations. Select Paired Device This is a setting for user to select one of the paired mobile phones to connect. 1. Select BT SELECT in system setup items. 2. Turn the [ROTARY] knob to choose one of the paired devices. 3. Press the [ROTARY] knob to connect. Delete Paired Device This is a setting for user to delete one of the paired device from the list. 1. Select BT DELETE in system setup items. 2. The paired device appears in the display, then turn [ROTARY] knob to choose one of the paired devices. 3. Press [ROTARY] knob. 4. Turn [ROTARY] knob to select CANCEL or ARE U SURE, and press [ROTARY] knob. CANCEL: cancel deleting the paired device. ARE U SURE: confirm to delete the paired device. Notes:
Deleted paired device will not automatically rearrange in the paired device list. After deleting the device, the phone book and the call history records will be deleted too. Disconnect Device This option is used to disconnect the currently connected device. 1. Select BT DISCON in system setup items, and press [ROTARY] knob. 2. Press and turn the [ROTARY] knob to select ARE U SURE or CANCEL. ARE U SURE: confirm to disconnect the paired device. CANCEL: cancel disconnecting the paired device. 3. Press the [ROTARY] knob to confirm. 11 English Pin Code Setting This pin code is used during pairing. A maximum of 10 digits can be changed through this unit. The factory default pass key is 1234. 1. Select PIN CODE in system setup items. 2. Press [ROTARY] knob. 3. Press [x] or [v] button to move the cursor. 4. Turn [ROTARY] knob to select the desired digits. 5. Long press [ROTARY] knob to store in memory. Performing Memory Reset Reset various settings in the memory. Note:
The settings will remain in the memory even if you turn the power off . 1. Select RESET in system setup items, and press [ROTARY] knob. 2. Turn [ROTARY] knob to select CANCLE or ARE U SURE, and press [ROTARY] knob. CANCEL: cancel resetting ARE U SURE: CLEARED appears in the display, and the memory will be cleared. System Setup Auto Answer This is a setting to determine whether any incoming call will be automatically or manually answered. The factory default setting is OFF. 1. Select A-ANSWER in system setup items. 2. Turn [ROTARY] knob to select ON or OFF. ON: Any incoming call is automatically answered in 5 seconds. OFF: User needs to manually answer the call. Auto Connect This function allows the Bluetooth to be connected automatically with previously connected device. Connection can be established at any source mode. The factory default setting is ON. 1. Select A-CONNECT in system setup items. 2. Turn [ROTARY] knob to select ON or OFF. Priority for Phonebook Download Setting the priority for the phonebook download automatically while pairing. The factory default setting is DEVICE. 1. Select TEL MEMORY in system setup items. 2. Turn [ROTARY] knob to select the setting: DEVICE/SIM. DEVICE: Phonebook download from device firstly. SIM: Phonebook download from SIM card firstly. 12 English Band scan Band scan is searching for good reception stations from current frequency to higher frequency repeatedly. When a good reception stations is searched, it will be listened in 7s. And then it continues scan. 1. Press [BND] button to select a band. 2. Long press [BND] button. Auto store Auto store is a function for storing up to 6stations that are automatically tuned insequentially. If 6 receivable stations cannot be received, a previously stored station remains unover written at the memory position. 1. Select AUTO STORE in system setup items (page 11). 2. Long press [ROTARY] knob. The stations with good reception are stored automatically to the preset channels. If auto store is performed in the FM bands, the stations are stored in FM3. If auto store is performed in the AM bands, the stations are stored in AM2. Radio Operations Listening to the radio 1. Press [SRC] button and select the radio mode. 2. Press [BND] button and select the radio band in the following order:
FM2 FM3 AM1 AM2 FM1 FM1... Switching display Press the [DISP] button to change the display. Manual tuning Press [x] or [v] button to manually tune a station. Seek mode setting 2 types of seek tuning: DX SEEK and LOCAL SEEK. DX SEEK can automatically tune in to receivable broadcast stations; LOCAL SEEK can tune in to only broadcast stations with a good reception sensitivity. The factory default setting is DX. 1. Select DX/LO in system setup items. 2. Turn [ROTARY] knob to select a seek mode. Seek tuning 1. Long press [x] or [v] button to automatically seek a station. Recalling a preset station A total of 30 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM1, 6-AM2) exists to store individual radio stations in memory. Press the corresponding [1]~[6] button to recall the stored radio frequency automatically. Manual store 1. Long press [1]~[6] button to store the current station into preset memory. 13 English CD/MP3/WMA Operations This unit can play back MP3/WMA files Note:
If you play a file with DRM (Digital Rights Management) for WMA remaining ON, no audio is output. Instead, : will blink for 5s in the play time, and then go to the next track to play. To disable DRM (Digital Rights Management) When using Windows Media Player 9/10/11, click on TOOL OPTIONS MUSIC RECORD tab, then under Recording settings, unclick the Check box for RECORD PROTECTED MUSIC. Then, reconstruct files. Personally constructed WMA files are used at your own responsibility. Precautions when creating MP3/WMA file Usable sampling rates and bit rates 1. MP3: Sampling rate 8 kHz-48 kHz, Bit rate 32 kbps-384 kbps/VBR 2. WMA: Sampling rate 22.05 kHz-48 kHz,Bit rate 32 kbps-320 kbps/VBR. File extensions 1. Always add a file extension .MP3 or
.WMA to MP3 or WMA file by using single byte letters. If you add a file extension other than specified or forget to add the file extension, the file cannot be played. 2. Files without MP3/WMA data will extension .MP3 or .WMA will not play. Instead, : will blink in the play time. When MP3/WMA files are played, a little no sound part is caused between tunes. Logical format (File system) 1. When writing MP3/WMA file on a CD-R disc or CD-RW disc, please select ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO as the writing software format. Normal play may not be possible if the disc is recorded on another format. 2. The folder name and file name can be displayed as the title during MP3/
WMA play but the title must be within 64 single byte alphabetical letters and numerals (including an extension). 3. Do not affix a name to a file inside a folder having the same name. Folder structure A disc with a folder having more than 8 hierarchical levels will be impossible. Number of files or folders 1. Up to 255 files can be recognized per folder Up to 255 files can be played. 2. Tracks are played in the order that they were recorded onto a disc. (Tracks might not always be played in the order displayed on the PC.) 3. Some noise may occur depending on the type of encoder software used while recording. Backup Eject function Just pressing the [Q] button, ejects the disc even if ACC OFF. Notes:
If you force a CD into before auto reloading, this can damage the CD. If a CD (12 cm) is left in the ejected position for 10 seconds, the CD is automatically reloaded (Auto reload). If you long press [Q] button to eject the disc (full eject), it can not be automatically reloaded. Listening to a disc already loaded in the unit Press the [SRC] button to select DISC mode. Loading a CD 1. Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading. 14 English CD/MP3/WMA Operations Notes:
Never insert foreign objects into the CD SLOT. If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service. Discs not bearing the mark and CD-ROMs cannot be played by this unit. Some CDs recorded in CD-R/CD-RW mode may not be usable. Pausing play 1. Press the [
2. To resume CD play, press the [
] button to pause play.
]
button again. Switching display This unit can display title data. Each time you press the [DISP] button to change the display. CD-DA disc Track No./Playtime Clock Track name Artist name Disc name Album Track No./Playtime ... name MP3/WMA disc Track No./Playtime Folder No./Track No. Clock Folder name File name Track name Artist name Album name Track No./Playtime ... Note:
Characters can be displayed: ISO8859-
1, ISO646/ASCII, UTF-16 (BOM/BE/LE), UTF-8, Shift_JIS. Track up/down 1. Press [v] button to the next track. 2. Press [x] button to the previous track if the playtime is within 1s; otherwise it will move ahead to the beginning of the current track. Fast-forward/Fast-reverse 1. Long press the [v] button to fast-
forward. 2. Long press the [x] button to fast-
reverse. Folder up/down This function allows you to select a folder containing MP3/WMA files and start playing from the first track in the folder. 1. Press [1] button to previous folder. 2. Press [2] button to next folder. Browsing function This function allows you search a file while playing MP3/WMA disc. 1. Press [3] button to enter folder search mode, then press [ROTARY] knob. The folder list appears. 2. Similar operations are repeated until the track list is displayed. 3. Turn [ROTARY] knob to switch between tracks, then press [ROTARY] knob to confirm selecting. 4. Press [ROTARY] knob to play. You can press [3] button to cancel the browsing mode during operations. You can press [DISP] button to return to the previous layer during operations. Play mode setting Scan play CD-DA disc - Play the first 10 seconds of all the tracks recorded on a disc. MP3/WMA disc - Play the first 10 seconds of the first track of all the folders on an MP3/WMA disc. 1. Each time you press [5] button:
Scan disc Scan off 15 English CD/MP3/WMA Operations Repeat play 1. Each time you press [6] button:
Random play 1. Each time you press [4] button:
Repeat all Repeat all CD-DA disc - Repeat one MP3/WMA disc - Repeat one Repeat folder Repeat one - Play the current track repeatedly. Repeat folder - Play all the tracks of the current folder repeatedly. Repeat all - Play all the tracks of the disc repeatedly. Random CD-DA disc - Random all off MP3/WMA disc - Random folder Random all Random all - Play all the tracks of an disc in a random order. Random folder - Play all the tracks of the current folders in a random order. Random off USB Operations 1. Open the cover of the USB connector on the right. Insert a USB device into the USB connector. If 1m extension is necessary, please purchase the optional CCA-755. When connecting a USB device, the unit will read the files automatically. 2. To remove the USB device, you should first select another source or turn off the power, in order to avoid damaging the USB device. Then take off the USB device. Close the cover to the left. 3. Operations are the same as for MP3/
WMA disc operations. CCA-755 Note:
Please do not add music files other than
.MP3 or .WMA in the USB memory. 16 English Bluetooth Audio Operations The following operations are the same as for CD mode:
Pausing Play Selecting a track Fast-forward/Fast-reverse Switch to Bluetooth Audio Mode Press the [SRC] button to switch to BT AUDIO mode. Switching Display Each time you press the [DISP] button to change the display. BT Device name Artist name name ... BT Device Album name Title name Clock Bluetooth Operations Mobile phones and audio devices that support Bluetooth can be connected for use on the unit. Notes:
This system will not operate or may operate improperly with some Bluetooth audio players and Bluetooth mobile phones. Browse the Clarion website to confirm mobile phone compatibility list. Bluetooth Pairing Please pair this unit from your Bluetooth device. Up to a maximum of 3 Bluetooth devices can be paired. 1. Search for this unit on your device Bluetooth setup menu. 2. Select Bluetooth_Audio from the pairing list on your Bluetooth device. For the Device (BT Ver.2.1 Above) 1. Please do operation to pair this unit on your Bluetooth device. For the Device (BT Ver.2.1 Below) 1. Please enter the pin code on your Bluetooth device to pair this unit. Notes:
After paired successfully, there is a prompt on your Bluetooth telephone asking whether allow to download the phone book and thee call histories into this unit. Up to a maximum of 500 telephone numbers can be registered. 17 English Bluetooth Operations Bluetooth Telephone Operations Switch to Bluetooth Telephone Mode Press the [SRC] button to switch to BT -TEL mode. Make Outgoing Call There are 3 ways to make outgoing call.
] button to hang up You can press [
during calling. You can press [ROTARY] knob during calling, the mic will be muted. Press it again will cancel mute. Call from Phonebook User can search the contact name in the phonebook and make call. Alternatively, user can call from mobile phone. 1. Press [BND] button. 2. Press [x] or [v] button to select PHONE BOOK. 3. Press [ROTARY] knob to enter the contact name list (in this case, you can turn [ROTARY] knob to select the desired contact name). 4. Press [ROTARY] knob to enter the phone number list. 5. If there are more than one phone No. of the contact name, press [x] or [v]
button to select a phone No. 6. Press the [ROTARY] knob to call the mobile phone No. Dialed&Missed Call History You can search the latest 10 dialed&missed call history. 1. Press the [BND] button. 2. Press [x] or [v] button to select REDIALS 3. Press [ROTARY] knob to enter the dialed&missed call list. 4. Turn [ROTARY] knob to select a call history. 5. If the phonebook has been downloaded, you should press [ROTARY] knob to display the phone No. 6. Press [ROTARY] knob to call the mobile phone No. Received Call History You can search the latest 10 received call history. 1. Press the [BND] button 2. Press [x] or [v] button to select to select RECEIVED. 3. Press [ROTARY] knob to enter the received call list. 4. Turn [ROTARY] knob to select a call history. 5. If the phonebook has been downloaded, you should press [ROTARY] knob to display the phone No. 6. Press [ROTARY] knob to call the mobile phone No. Answering a call You can answer an incoming call by pressing [DISP] button. Press the [
] button to reject an incoming call. Switch to the secret call Press the [BND] button to switch to the secret call mode. When you switch to the secret call mode, you will not hear the call from this unit and only can hear it from your mobile phone. 18 English AUX Operations AUX function This system has an external input jack on the front panel so you can listen to sounds and music from external devices connected to this unit. Selecting AUX IN sensitivity Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume. The factory default setting is MID. 1. Select AUX SENS in system setup items(page 11). 2. Turn the [ROTARY] knob to select HIGH, MID or LOW. 19 English 5. TROUBLESHOOTING General Problem Power cannot be turned on. Cause Fuse is blown. No sound output when operating the unit with amplifiers or power antenna attached. Incorrect wiring. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. Measure Replace with a fuse of the same amperage. If the fuse blows again, consult your dealer. Consult your dealer. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn the unit back on. 4. Reconnect each amplifier remote wire to the power antenna lead one by one. If the amplifiers turn off before all wires are attached, use an external relay to provide remote-on voltage (excessive current required). Nothing happens when buttons are pressed. Display is not accurate. No sound heard DCP or main unit connectors are dirty. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. The speaker protection circuit is operating. 1. Turn down sound volume. Function can also be restored by turning the power off and on again. (Speaker volume is reduced automatically when the speaker protection circuit operates). 2. If the sound is muted again, consult our service department. E n g l i s h 20 Disc Player Problem No sound heard Sound skips or is noisy. Sound is cut or skipped. Sound is bad directly after power is turned on. Wrong filename USB Devices Problem No sound heard Sound is interrupted or has noise. The device isnt recognized. Cant insert the device. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. Measure Write MP3/WMA files onto the disc properly. Use MP3/WMA files encoded properly. Cause MP3/WMA files are absent in a disc. Files are not recognized as an MP3/
WMA file. File system is not correct. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heavily scratched or warped. MP3/WMA files are not encoded properly. Water droplets may form on the internal lens when the car is parked in a humid place. File system is not correct. Use ISO9660 level 1, 2 or JOLIET or Romeo or APPLE ISO file system. Replace with a compact disc with no scratches. Use MP3/WMA files encoded properly. Let dry for about 1 hour with the power on. Cause The device contains no MP3/WMA files. The files are not proper MP3/WMA format. The MP3/WMA files are improperly encoded. The device is damaged. Connectors are loose. The device has been inserted improperly. The connector is broken. Measure Record MP3/WMA files properly to the device. Use only properly encoded MP3/WMA files. Use only properly encoded MP3/WMA files. Disconnect the device and reconnect. If the device is still not recognized, try replacing with a different device. Try reversing the connection direction of the device (usually the brand name surface should be facing left). Replace with a new device. E n g l i s h 21 E n g l i s h Bluetooth Problem Cannot pair the Bluetooth enabled device with the car audio system. The Bluetooth hands-free audio quality is not improved after connection with a Bluetooth-enabled device. Cause The device does not support the profiles required for the system. The Bluetooth function of the device is not enabled. The Bluetooth information does not match. The external microphone is not set correctly nor properly positioned. Measure Use another device to pair. Refer to the user manual of the device for how to enable the function. Delete the paired device on your bluetooth device and the car audio system, and then pair them again. Adjust the gain and position of the external microphone. For example, stick the microphone onto the dashboard so it is close to the driver. 22 6. ERROR DISPLAYS If an error occurs, one of the following displays is displayed. Take the measures described below to eliminate the problem. E n g l i s h Error Display Cause CD MECHA ERROR DISC ERROR A CD cannot be played due to This is a failure of CD decks mechanism. scratches, etc. A CD is loaded upside-down inside the CD deck and does not play. No MP3/WMA file is recorded in the device. NO FILE l y a P c s D i USB ERROR Protocol or File system is not NO DEVICE NO FILE B S U HUB NOT SUPPORT DEVICE NOT SUPPORT correct. No connection or the connection is loose. No MP3/WMA file is stored in the device. The HUB devices are not supported. The connected USB is not supported. Measure Eject the disc then reload it. Replace with a non-scratched, non-warped-disc. Eject the disc then reload it properly. Record MP3/WMA files in the device. Replace with a USB device in correct protocol or file system. Reconnect the device. Store MP3/WMA files in the device. Do not use the HUB devices. Connect the other supported device. If an error display other than the ones described above appears, restart this unit. If the problem persists, turn off the power and consult your store of purchase. 23 General Output Power : 12W X 4 ( +B=26.4V) Power Supply Voltage :
24V DC , negative ground Power Consumption: Less than 15 A Speaker Impedance : 8-16 Weight of Main unit : 1.09 kg Dimensions of Main unit:
180 (W) X 50 (H) X 175 (D) mm m m 5 7 1 178 mm 177.8 mm 180 mm m m 7 5 1 m m 2 50 mm Note:
Specifications and design are subject to change without notice for further improvement. 7. SPECIFICATIONS Radio section Receiving Frequencies:
FM : 87.90 to 107.90 MHz (0.2 MHz steps) AM : 530 to 1,710 kHz (10 kHz steps) CD player section System: Compact disc digital audio system Frequency Response :
17 Hz to 20 kHz ( 3 dB) Signal to Noise Ratio:
more than 65 dB (1 kHz) Distortion : less than 0.4%
MP3/WMA MP3: Sampling rate 8 kHz-48 kHz, Bit rate 32 kbps-384 kbps / VBR WMA: Sampling rate 22.05 kHz-48 kHz, Bit rate 32 kbps-320 kbps / VBR Logical format:
ISO9660 level 1, 2 Joliet file system USB Specification: USB 2.0 Playable audio format:
MP3(.MP3): MPEG 1/2/2.5 Audio Layer-3 MPEG 1/2 Audio Layer-2 WMA(.wma): Ver 9.2 Bluetooth Specification:
Bluetooth Ver. 2.1 + EDR Profile:
HFP (Hands-Free Profile): Ver. 1.5 A2DP (Advanced Audio Distribution Profile): Ver. 1.2 AVRCP (Audio/Video Remote Control Profile): Ver. 1.3 PBAP (Phone Book Access Profile) E n g l i s h 24 The device must not be co-located or operating in conjunction with any other antenna or transmitter.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2018-07-04 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2018-07-04
|
||||
1 | Applicant's complete, legal business name |
Clarion Co., Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0024082281
|
||||
1 | Physical Address |
6F,NO.40,Guanri Road, Software Park Stage II
|
||||
1 |
Xiamen, N/A 361008
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@siemic.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
WY2
|
||||
1 | Equipment Product Code |
PJ4605
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
W****** B****
|
||||
1 | Telephone Number |
86-59********
|
||||
1 | Fax Number |
86-59********
|
||||
1 |
b******@clarion.com.cn
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | CAR AUDIO | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is the maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch
|
||||
1 | Name |
A****** H******
|
||||
1 | Telephone Number |
86 76********
|
||||
1 |
a******@cn.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0033270 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC