Car Navigation QY-8800 MODEL Navigation system manual Table of contents Names of Various Parts 3 Basic Operations 4 Bluetooth Operation 5 Navigation 6 Navigation System Settings 8 Route Guidance 9 About Information 10 1 English To comply with FCCs and Industry Canadas RF radia-
tion exposure limits for general population/uncontrolled exposure,this device must be installed to provide a sepa-
ration distance of at least 20cm from all persons. This device complies with Part 15 of the FCC Rules. Op-
eration is subject to the following two conditions :
This device may not cause harmful interference, and This device must accept any interference received, in-
cluding interference that may cause undesired operation. Shielded cables must be used with this unit to ensure compliance with the Class B FCC limits. Warning Changes or modifications to this unit not expressly ap-
proved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:
G This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help. The device must not be co-located or operating in con-
junction with any other antenna or transmitter. 2 English Names of Various Parts Panel Buttons 1 2 3 4
$
#
@
!
0 5 6 7 8 9 1 [Q]Eject button: Short press it to eject the disc inside the unit. 2 Disc slot: CD disc can be inserted for playing. 3 LCD(touch screen): To display the working statuses of various modes. 4 SD card slot: Map SD card. 5 [
]Day/night button: Press to switch between day or night mode. 6 [A]Previous Track button: In CD/USB/iPod/ Bluetooth Audio Device mode, short press it to select the previous track to play, and long press it to Fast Reverse; in AM/
FM mode, short press to search radio station frequency down manually. 7 [D]Next Track button: In CD/USB/iPod/Bluetooth Audio Device mode, short press it to select the next track to play, and long press it to Fast Forward; in AM/FM mode, short press to search radio station frequency up manu-
ally. 8 [ BACK] button: Back to the previous mode. 9 [TUNE SCROLL] knob/[ENTER/SOUND] button: Ro-
tate to jump to previous or next touch key in the general mode; press and rotate the knob to adjust the sound effect or tone quality. Rotate to zoom in or out the map in the map mode. 0[CAMERA] button: To enter camera mode.
! button/Volume Knob: Rotate to adjust volume; short press to turn off/on audio device.
@[AUDIO]button: To enter audio selection screen or Audio Mode.
#[MAP] button: Press to enter the map screen.
$[MENU] button: Press to enter Menu Screen to select audio function or navigation function. Caution It is prohibited to pull out the map SD card or the system will not work. 3 English Basic Operations Mode Switch Switch to navigation mode Press [MAP] button on the panel to switch to navigation mode for map display. Switch to source mode Press [AUDIO] button on the panel or touch such as Radio mode. to switch to source mode touch screen. to enter main menu Switch to Bluetooth mobile phone mode Touch phone mode. switch to Bluetooth mobile Press [AUDIO] button or touch in Source mode to switch to source selection screen. z Change page by dragging left or right or touch and
. Basic Settings 1 Press [MENU] button on the panel. 2 Touch to enter Settings Screen. 4 Main menu operations On main menu screen you can enter corresponding work mode by touch the icons on the screen. 1 Press [MENU] on the panel or English Bluetooth Operation Pair Bluetooth Device 1 Touch to enter Settings Screen. Then touch enter Bluetooth setting screen. to 3 Touch the icon to enter the appro-
priate setting. Source Media Mode 1 Press [AUDIO] button on the panel or touch screen. to enter source 2 Touch to select the mo-
bile phone or audio device to pair. 4 If you want to select the audio deviceto pair, touch
, and you have to edit the PIN (minimum 4 digits and maximum 16 digits) to pair the audio device. 2 Touch the icon to enter the appro-
priate source media. 3 If you want to select the mobile
. phone to pair, touch 5 After entering the PIN, touch and operate as per the information prompted. 5 English 2 Touch the icon to enter the appro-
priate function. Navigation Menu Types and Operation Map menu (Menu on current location map) Touch display the Map menu at the left side of the screen. on the map screen to Map Screen Features Types of the map There are two types of map: the 2D map and the 3D map. 2D Map 6 After successful pairing, it will automatically return to Bluetooth Setting screen. Bluetooth Telephone 1 Touch to enter Phone screen. 6 Location menu (Menu on scrolled map) After scrolling the map by touching on the the Map screen, touch screen to display the Location menu at the left side of the screen. 3D Map English Indicators on the map Indicators displayed on the Map screen are different according to the conditions at that time. Indicators on the map of the current location 1 2 3 3 4 1 Audio mark 2 Vehicle mark 3 [
4 [
5 [
]Map Menu key
]Map scale key
]Map bearing mark Indicators on the scrolled map Indicators are displayed after scroll-
ing the map. 1 2 3 Manipulating the Map Screen Scrolling the map Touching the Map screen displays a cursor at the centre of the screen, you can scroll the map. Slow scroll mode operation Touch to display the following screen:
while scrolling the 2D map E n g l i s h
] (Slow Scroll)key 1 [
2 Displays the name of the street under the cursor. Indicators displayed during the route guidance mode After a destination is set and travelling is started, the guidance route and various guidance information are displayed on the map. 1 2 3 1 Small Turn Arrow display 2 Guidance point 3 Distance to the waypoint/destination
,
,
,
,
, Keep touching the desired arrow key
(
.) moves the map slowly towards the corre-
sponding direction. To quit the slow scroll mode, touch
,
,
. Zooming IN/OUT the map 1 Touch out key. to display the zoom in/
7 Entering the Destination Searching Your Destination from the Destination Menu You can search for a destination from the Destination menu by using vari-
ous methods. Use a suitable search-
ing method according to the place you wish to go to, then operate as per the information prompted. Destination menu screen Navigation System Settings 1 Press [MENU]/[MAP]/[AUDIO]
button on the panel to display the function bar.
, to enter 2 Touch Navigation Settings Screen. 3 Touch the item to enter the appro-
priate setting. 2 Touch or to change the map scale. Changing the map appearance The Map screen can be adjusted regarding orientation or appearance of the map. 1 Touch on the Map screen of the current vehicle location. 2 Touch to enter Map View screen. 3 Touch the corresponding key to change the map view. 8 English Route Guidance After you have entered the destina-
tion and started the route guidance, you will be guided along the route by screen display and by voice. Junction Map 1 23 1 Remaining distance indication 2 Guidance route 3 Guidance point Turn list on Route The screen is always divided into two displays and the Turn List on Route is displayed on the left display if Turn List is activated. 1 2 1 Turn List 2 Scrolling key Changing/Editing the Route Settings From the Route menu, editing the current route, confirming the route information, setting the conditions of the route calculation, etc. can be performed. 1 Press [MENU] button on the panel. 2 Touch to enter Route menu screen when a route had exist. 3 Touch the desired item to change or edit the route settings. 9 English About Information This screen sets or displays various information that is helpful for using the vehicle safely and comfortably. 1 Press [MENU] button on the panel. 2 Touch to enter Info screen. 3 Touch the desired item to view the information, and about some items you can operate as per the infor-
mation prompted. 10 English