Multi Touch Screen/ Interactive Flat Panel Display User Manual TL18.201401202 Please kinly keep this manual for future inquiries. This manual is used as the LCD all in one tpuch TV manual, the actual product may be slightly different with description. Content Matters Needing Attention................................................................................................................. 3 Installing Requirement........................................................................................................................ 5 Carrying capacity.........................................................................................................................5 Abstract heat...............................................................................................................................5 Summary............................................................................................................................................. 6 Characteristics.............................................................................................................................6 Basic Operation................................................................................................................................... 7 Turn on........................................................................................................................................ 7 Turn off........................................................................................................................................ 7 Introduction of OSD..............................................................................................................................8 How To Choose Analog Channel ..................................................................................................8 How To Choose Application ........................................................................................................ 8 Introduction Of Set ....................................................................................................................9 How To Use TV...................................................................................................................................12 Network Setting........................................................................................................................ 13 Wired Network Setup............................................................................................................... 13 Wireless Network Setup ......................................................................................................... 14 Network Status Lookup.............................................................................................................15 Remote Control................................................................................................................................. 16 Control Panel.....................................................................................................................................18 Switchover Among Three Signals......................................................................................................20 Full Touch...........................................................................................................................................21 Specification Of PC ModeVGA Input.........................................................................................22 Supporting Format Of USB................................................................................................................22 Maintaining Guide.............................................................................................................................23 FCC .................................................................................................................................................23 2 Safety Considerations warning Do not place containers with liquid on or near this product. Use only dry cloth to clean. Do not block any ventilation holes. Install this product according to manufacturers User Manual. A distance of at least 16cm must be kept from this product and other objects and/or walls. Do not install this product near heat sources. This product must be connected to a power point which is appropriately earthed. Use the earthed power plug supplied by with this product. Keep the power cord tangle free. Use a properly functioning power point at all times. Disconnect the power plug during storm or if you intend not to use for a long period of time. The device is a heavy product and when moving use appropriate equipment to avoid injury. Use qualified technicians to mount the device on the wall and/or mobile trolley. Abide by manufacturers mounting instructions. Use only qualified technicians for all repairs. Antenna must be kept away from power cord. The external antenna must be connected to earth to prevent potential damage caused by voltage surge or ESD(Electro Static Discharge) Follow instructions when inserting batteries into the remote control unit. Discard all batteries appropriately. Do not use mixed batteries (old and new, carbon-zinc and alkaline). 3 Installing Requirement Carrying capacity Better use the wall mount brackets supplied together with the product, if not, please make sure the carrying capacity is not less than 4 times the actual load weight and make sure the machine can be placed on it stably. Be sure the mounting surface is not less than 4 times the actual load weight. If the mounting surface is the building wall or roof, the surface must be solid brick, concrete or something have equivalent strength. If the mounting surface is loose material (such as brick wall on old houses, wood etc.) ,metal, non-metal structure, or the decoration layer is too thick on surface, which strength is obviously insufficient, please take corresponding measures to strengthen , support it , eliminate security risks exists. Abstract heat Leftside&rightside 10 Distancebetween the machine and mounting surfacecm Backside 10 Requirement Standard Power Over 100W Note: If the machine inlay in the wall, or in the box, in addition to meet the above requirements, the vent area of the bottom, side, top required not less than 50% of the sealing area, keep the air circulation. Graphic Topside 20 Bottom 20 4
*Ref to the standard of CAS 132-2006 Summary The interactive tablet is the interactive products based on independent R&D, and a multi-functional teaching equipment set the interactive teaching, multimedia presentation, digital speech, touch operation, handwriting input as a whole. From design to production, we give full consideration to the application characteristics of the field of education. Convenient operation, full digital intelligent control, we can use fingers or non-transparent objects on the screen to write, modify or delete ,which is an perfect tool for the modern education. Characteristics Tailored for teaching and meeting system. High brightness, high contrast screen, clear view under bright sunlight or indoor and outdoor environment . When we need in low brightness display mode , press on key can enter the power saving mode, which reduce the backlight brightness to save energy and protect the environmental . Using the advanced infrared array scanning induction technology , HID free drive, we can use the machine once connect. The graphics processing of the software are all based on vector graphics, which has the 5 characteristics of high compression, distortion etc.. variety of selection on pen type,line width,color . Powerful screen editing function, support real-time editing. A variety of background selection, support user-defined background, has the image insertion function for any graphics or picture , . Intelligent identification function of geometric graphics, has various kinds of graphics identification, high recognition rate, and can identify several pen at same time . Simulation function of brush cause the font looks vigorous . Support to save the file we wrote as the PDF, JPEG, GIF, PNG, TIFF, BMP and other formats. Simulated operation of mouse. Supports dual touch, multi finger touch. User management module realizes the function of adding or delete user, switching user, customizing the user information and etc, which drives the software setting much match to a user's habits Support for other application software. Support the identification on English, numbers, special characters . Basic Operation Turn on Use 100240V 50/60Hz alternating current as the power supply of the machine Open the baot-shape swith in the middle of the bottm on the machine (near the power interface side) to connect power supply. (the status on indicator window is red light) We can press the "power" button on the machine panel or the "standby" button on the remote control to tunrn on the machine (the status on indicator window is green light), if the built-in OPS does not start-up, press the "SET" button on the machine panel to open the computer power supply (this function just support all in on touch model). Turn off If you want to turn off machine temporarily , please press the power button. We can shut down the computer by press "SET" button on the panel under the stauts of the ops computer working
. (this function just support all in on touch model) If you want to shut down the machine completely, please press the baot-shape 6 swith in the middle of the bottm on the machine (near the power interface side) or unplug the power plug. If the machine has built-in PC, please shut down PC first, and then cut off the power. Turn on the machine by the power switch, we can see Android characters shows on the right bottom of screen display , which means the Android system is starting and please do not cut off the power supply at this time, only can we cut off the power supply after the Android system finish booting loading. Introduction of OSD Operation Of OSD How To Choose Analog Channel 1.Three ways as follows to choose the channel:
1.1 Press Source to choose 1.2 Press Sourceas follows to choose 7 1.3 Press Sourceon the front panel or remote control to choose. 2. It will showed as follows after choosing the Source 3. When Sourceshowed as above, there are three ways to enter it 3.1 Directly click. 3.2 Select "source" and then automatically enter it. 3.3 Press to select the signal channel wanted and then press
"OK"
to confirm. 4. Also can enter it by the Full Touch Menu. Please refer to the details at the introduction of Full Touch Menu. How To Choose Application 1.1 Press any applications as follows to choose:
Introduction Of Set 1. Menu of the image setting will show up through the following three ways:
1.1 Enter from "Menu" which is at the bottom of the screen;
8 1.2 Enter from the "Menu" on the remote control . 1.3 Enter from the "Menu" on the front panel . 2. Operate on Set through the following two ways:
2.1 Directly click on the icon to choose. 2.2 Press "" to select. (content of Set: Picture, Sound, Tuner, Adjust,Function)
*Picture 1.1 Directly click on the icon to choose. 1.2 Press to select. Press " " to confirm the submenu and adjust the value. Press " "
to move to the wanted submenu(purple color lights means be selected)
*Sound 9 1.1 Directly click on the icon to choose. 1.2 Press to select. Press " " to confirm the submenu and adjust the value. Press " "
to move to the wanted submenu(purple color lights means be selected)
*Tuner 1.1 Press Adjustto select the submenu. 1.2 Press to select. Press " " to confirm the submenu and adjust the value. Press " " to move to the wanted submenu(purple color lights means be selected).Press" " to choose ATV Auto Search and DTV Auto Scan. 1.3 Press Enter to start automatic search. If you need to interrupt, please press "stop" to return to the previous menu.
*Adjust 10 1.3 Press Adjustto select the submenu. 1.4 Press to select. Press " " to confirm the submenu and adjust the value. Press " "
to move to the wanted submenu(purple color lights means be selected)
*Function 1.1 This button is only for the TV which has 3D function. Press the Function to select. 1.2 Press to select. Press to select. Press " " to confirm the submenu and adjust the value. Press " " to move to the wanted submenu(purple color lights means be selected) 1.3 Useless for TV without 3D function 11 How To Use TV:
Network Setting Choose the net connecting mode and set the right number. Press main page to enter the main menu, press " " button to select [system setting] and press enterto enter the submenu. Press " " button so select Net Settingsand pressenter to enter. Press " " to select between WIFI or WIRED. A.Wired Network Setup It will be automatically equipped with an IP number if LAN is connected and DHCP(set automatically) is supported. Follow the steps to set the IP manually:
Press " " to select the number needed to be changed, press numeric keys to input 1) Press " " to selectautomatically get IP address [Close]
2) the [IPv4 Address], [Subnet Mask][ Default Gateway][DNS address]
3) Press enter wired network setting
[ Save] and pressEnterto save the IP address setting. Press " " to select [Next] to B.Wireless Network Setup 1) The system will search the available wired and wireless network automatically, press to select [Wireless Network] and pressEnterto enter the wireless network setting. 12 2) Press "
" to select [Search] to enter the network setting, press " " to select the WI-FI network from the list, press " " to select [Next ] and press enter 3) Password: Input the WI-FI password, press Enterand then press " " to select [Finish]
and pressEnter, then press " " to select Nextto start the wireless connection. 13 Network Status Lookup Check the connection status of the current network and the detailed information. Remote control 14 Remote control A 1 Standby: turn on or turn off the machine 2 Mute: mute or restore the sound 3 0-9 numeric key:
selection or input numbers 4 DIS: display the screen 5 CHLISI: program list under TV ,can be edited,deleted or skipped etc 3D: save energy EPG: EPG: application key for DTV Exit: Exit 6 INPUT:enter or select source channel 7 MENU: enter or exit from the menu 812910up/down/left/right: select up/down/left/right 11) OK: confirm the selection 13 ) 14) 15) VOL+/-: VOL+/ VOL- to 16) HOME: enter the main page 17) 18) CH+/-: select previous channel or next channel 19) 20) Play/PauseStop: play audio/video or pause audio/videostop the playing audio/video 21) PRSRN: insert a SD card before screenshot 22) 23) the audio/video 24) Previous/Next: select previous or next page 25) 26) P.MODE:select image mode as standard, soft etc 27) TV:select TV channel Forward/Rewind: Forward or Rewind Sleep: set start and off time of the sleep Screen Display: display the screen S.Mode: select sound mode as: standard, music, theater etc 15 Remote control B 1 Standby: turn on or turn off the machine 2 Indicator: indicator lights if press any button 3 Image mode: select image mode as standard, soft etc 4 Sound Mode: select sound mode as: standard, music, theater etc 5 Display mode 6 Sleep: set start and off time of the sleep 7 0-9 key: ATV/DTV channel selection or input numbers 8 Main page: enter the main page 9 EPG: application key for DTV 10) Audio source: enter or select source channel 11) Menu: enter or exit from the menu 12) OK: confirm the selection 13) up/down/left/right: select up/down/left/right 14) Screen Display: display the screen 15) Exit 16) VOL+/-: VOL+/ VOL- to increase/decrease the volume 17) Channel+/-: select previous channel or next channel 18) PgUp: previous page 19) PgDn: next page 20) F1/F2/F3/F4: application key for DTV, same as the function for F1/F2/F3/F4 on computer (activated when connecting to computer) 21) F5/F6: previous page /next page, same as the function for F5/F6 on computer (activated when connecting to computer) 22) F7/F8Forward or Rewind, same as the function for F7/F8 on computer (activated when connecting to computer) 23) F9/F10: pause/play/stop, play audio/video, pause audio/video or stop audio/video, same as the function for F9/F10 on computer (activated when connecting to computer) 24) F11/F12same as the function for F11/F12 on computer (activated when connecting to computer) 25) Alt+Tab/Space/Alt+F4/+Right: same as the function for Alt+Tab/Space/Alt+F4/+Right on computer (activated when connecting to computer) 26) Computer: select computer channel 27) HDMI: select HDMI channel 28) Calibration: VGA 29) TV: select TV channel 30) Liston only: turn on or turn off 31) Energy saving: switch between standard and energy saving mode 32) Screenshot: insert a SD card before screenshot 16 33) 3D: turn on and turn off 2D/3D function Attention: Shortcut keys for computer on the remote control work normally when touch TV works normally Control Panel Buttons on front panel A-Turn On/Off B-Source Input C-Menu D-Volume+
E-Volume-
F- Channel+
G-Channel-(Menu item+/-) H- PC turn on/off I- TV USB(input) J- PC USB (input) 17 Buttons on rear panel
*When HDMI1/HDMI2/HDMI3 connects to the HDMI of computer or DVD etc When select HDMI1 on Sourcemenu, HDMI1 and TOUCHPORT are connected,HDMI2 HDMI3 is disconnected. When select HDMI2 on Sourcemenu, HDMI2 and TOUCHPORT are connected,HDMI1 HDMI3 is disconnected. When select HDMI3 on Sourcemenu, HDMI2 and TOUCHPORT are connected,HDMI1 HDMI2 is disconnected.
* VGA IN: Computer signal input When select PC1 on Sourcemenu, VGA-IN ,AUDIO-IN and TOUCHPORT are connected. AUDI0-IN should be connected to the audio input of the PC.
*OPS: When select OPS on Sourcemenu, it will show the interface of the OPS without any connection, works only for products with OPS.
* Y PB PR-IN: Connect to the Y PB PR terminal of the DVD 18
* AV1-INAV2-IN: Connect to the AV output of the DVD
* AV-OUT: Connect to the AV-IN of another TV
* RF-IN: Input terminal of TV signal
* USB1USB2USB3.0: Connect to USB Disk
* SD CARD: Insert SD CARD
* RJ45: Wired internet port Switchover Among Three Signals
*When select HDMI1 on Sourcemenu, HDMI1 and TOUCHPORT are connected,HDMI2 HDMI3 is disconnected.
*When select HDMI2 on Sourcemenu, HDMI2 and TOUCHPORT are connected,HDMI1 HDMI3 is disconnected.
*When select HDMI3 on Sourcemenu, HDMI3 and TOUCHPORT are connected,HDMI1 HDMI2 is disconnected. Full Touch Open the machine, wait till Android characters disappear and screen displays normal and then use finger or touch pen draw straight line from the center of the bottom upwards (the line should be longer then 10CMS). If the menu of the full touch hasnt appeared, please draw straight line upwards again, the menu of the full touch is as follows:
19 Press the buttons directly with your hand or touch pen Press EXIT to exit from the full touch interface 20 Specification Of PC Mode (VGA Input):
S/N Standar d Resolution Refresh Rate(Hz) Horizontal Frequency
(Khz) Vertical Frequenc yHz 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA VESA 640X480 640X480 640X480 800X600 800X600 800X600 800X600 1024X768 1024X768 1024X768 1280X960 1280X960 1280X1024 1280X1024 1600X1200 1920X1080 60 72 75 56 60 72 75 60 70 75 60 75 60 75 60 60 31.5 37.9 37.5 35.1 37.9 48.1 46.9 48.4 56.5 60 60 75.159 64 80 75 60 72 75 56 60 72 75 60 70 75 60 75 60 75 60 66.547 59.988 Horizontal/Ver tical synchronizatio n unipolarity TTL N/N N/N N/N P/P P/P P/P P/P N/N N/N N/N N/N N/N P/P P/P P/P P/P Supporting format of USB Multimedia Type Picture Document Format File Extension JPEGBMPPNG
.jpg.jpeg.bmp .png MPEG1MPEG2 MPEG4H264RV8 RV9RV10MJPEG DivxXvid WMA MP3M4A AAC TXT Movie Music Text
.avi.mpg.dat.vob.mov.mkv.rm .rmvb.mp4
.ts.trp
.wma.mp3.m4a.aac
.txt 21 Maintaining GuideExplanation Bellowing situation is not production faulty:
1. if there is a little tiny red, blue, green spots on the TV screen (Highlights spots), or dark spot
(scotoma) under some picture, its not production faulty. because the manufacture of LCD panel requires very sophisticated production technology, it may produce very few pixels too bright or too dark . its under the international quality standard, would not affect the overall performance of the flat panel. 2. there might be a little noise when the back light adjust or production cooling, its normal aspect. 3. if the picture and sound without problem, bellowing phenomenon is normal aspect:
A. Feel electrostatic when touch LCD screen and the metal shell;
B. A little high temperature on screen and its backside. 22 Self-checking Please check bellowing question accordingly before require a repair. Whether the power plug is properly connected?
Whether there is a barrier between the monitor and remote control receiver?
Cant start the machine Don't press the switch too many times in very short time, because it designed a protection. Need a few seconds for re-start, when you just shut it down. No image or image is Whether the color is properly adjusted?
monochrome Whether the format of the color is correct?
Whether use the mute function?
No signal when Whether the external devices and the monitor are connected properly?
connects to outer Whether choose the correct monitor receiving signal source?
devices Does the external devices work well?
Signal source is different Image is not good as Try to change the source to HDMI. showed in the shop or Please adjust the resolution of the video output device to 1080i or 720 p supper market Please use HDMI or YPBPR to transfer the high resolution image 23 Trouble shooting Problem No touch Causing Solution Touch Port is not connected or USB cable has problem 1.Please use a new USB cable to test or inspect 2. Check if the Touch Port is broken Infrared tube is blocked Ensure the infrared tube is not blocked Need calibration every time open the monitor Infrared tube is blocked or equipped with restore card Reposition the serving program after turn off the PC calibration not accurate Calibration operation incorrect There are waves during the writing Wrong writing method Has strong light or interference to the infrared tube Writing method incorrect broken during Lines writing The shelter area is not big enough during the writing or the tip of the pen is too sharp Use Auto button on the remote control to make the image full screen, then reposition with a pen 1. Use a pen to write. Stay away from the tip when holding the pen. 2.The angel between the pen and the screen should be more than 60 degrees(make sure the sleeve and wrist are not too close to the screen ) Remove the interference or change to an environment without interference 1. Use the pen to write. 2. Stay away from the tip when holding the pen. 3. The angel between the pen and the screen should be more than 60 degrees(make sure the sleeve and wrist are not too close to the screen ) Change the tip or use a pen with big shelter area Infrared tube is blocked Check whether there is something blocks on the infrared tube Has strong light or interference to the infrared tube Remove the interference or change to an environment without interference Color of the pen is the same or similar to the color of the screen Change the color of the pen Cant write There are other things on the screen during writing Has strong light or interference to the infrared tube Writing method incorrect Not work in windows 8 system The laptop with touch screen itself 1. Use a pen to write. Stay away from the tip when holding the pen. 2. The angel between the pen and the screen should be more than 60 degrees(make sure the sleeve and wrist are not too close to the screen ) Remove the interference or change to an environment without interference 1. Use a pen to write. 2. Stay away from the tip when holding the pen. 3. The angel between the pen and the screen should be more than 60 degrees(make sure the sleeve and wrist are not too close to the screen ) Connect the VGA or HDMI of touch monitor to laptop first, then connect touch USB. 24 Touch frame trouble shooting Problem No sound or image Has image but no sound No image or image is monochrome Image or sound is interfered Malfunction of remote control Monitor trouble shooting solutions 1. Check whether the power cord is connected to the power socket, and whether the power is on 2. Check whether the switch of the screen is opened 3. Check whether the standby button of the panel is opened 4. Check whether the input line of video and audio is normal 5. Check whether switched to the correct signal input source 6. Check the brightness of image and contrast settings 7. Check the volume 1. Check the volume 2. Check whether the mute button on the remote control is turned on 3. Check the audio connection between computer and screen Adjust the setting of the color Check the format of the color 1. Find out the interference electrical equipment around the touch screen, move it away 2. Do not share the same power socket with the interference electrical equipment 1. Replace the battery 2. Clean the top of the launch window of the remote control (whether it is blocked) 3. Check the battery contact point (whether poor contact) Product Energy Conservation When you no use it, please set the product to the off state to reduce energy consumption. In the premise of watching quality, lowering the brightness of the screen can reduce energy consumption during using. The device complies with RF specifications when the device used at more than 20 cm from your body. If there is malfunction indeed, please power off the touch monitor, pull out the power cable and contact our after-sales on the warranty card for further help. FCC This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 25