900MHz Digital Hybrid Wireless Shower Speaker Warnings
- To avoid electric shock, do not handle the transmitter base or AC adapter with wet hands.
- Do not attempt to repair or modify this unit.
- Do not use attachments not recommended by the manufacturer.
- Do not drop, shock or apply pressure to the unit. This may cause permanent damage. Battery Precautions
- Only use specified AA batteries or equivalent replacements with this unit.
- Batteries may leak or explode if recharged, inserted improperly, disposed of in fire or mixed with different types.
- When installing batteries, observe proper +/- polarities. Batteries positioned incorrectly may leak and cause damage to the unit.
- Never attempt to recharge conventional dry cell batteries.
- Replace only with fresh, new batteries.
If unit will not be used for a long period of time, remove batteries to prevent damage or injury due to possible battery leakage.
- Keep all batteries away from children. General Instructions Overview This 900MHz shower speaker system utilizes the latest advances in wireless transmission technology to deliver dynamic, high-quality audio from virtually any audio/video device, indoors up to 150 feet away. Simply connect the transmitter to a desired audio source: I-Pod, MP3, CD, DVD, Hi-Fi system or radio to enjoy wireless, full spectrum sound without complicated wiring and installation while having a shower. Features
- Waterproof speaker.
- High-Quality, interference-free sound.
- 900MHz Digital Hybrid RF technology speaker system.
- RF technology allows full freedom of movement.
- Operating distance up to 150 feet.
- RF transmission travels freely through walls, floors and other solid objects.
- Auto On/Off Control.
- Auto Tuning function. Parts Identification Transmitter Signal Indicator Power Indicator Channel Selector
(Channels 1 and 2) DC In Jack 3.5mm Audio Input Jack Auto Tune Volume +/- Bass Boost Power On/Off Button Buttons Button Button Transmitter Operation 1. Plug the included AC adapter into a standard wall outlet. 2. A blue POWER indicator illuminates when the AC adapter is plugged in. If the blue POWER indicator does not illuminate, ensure the adapter is plugged in. 3. Insert the adapter connector plug firmly into the DC jack located at the back of the transmitter. 4. Open the cover on the top of the transmitter, you can pull out a 3.5mm audio cable which you can connect it to the i-pods output jack. After used, just pull it for a bit and release, then it will roll back automatically. 5. The rubber surface of the transmitter is specially designed for you to lay your I-pod on it to prevent sliding down. 6. You can also connect one end of the supplied audio cord to the rear of the transmitter, and connect the other end to the output jack of any of your desired audio sources, like MP3, CD, DVD, TV, Radio recorder, etc. 7. When an audio signal reaches the transmitter, the green SIGNAL indicator illuminates together with the blue POWER indicator. If the green SIGNAL indicator does not illuminate, ensure the audio source is switched on. Speaker Battery Operation 1. To operate the speaker using battery power, open the battery compartment cover located at the rear of the speaker. 2. Insert six AA size batteries (purchase separately) into the battery compartment, observing proper +/- polarities as indicated. 3. Replace the battery compartment cover. AC Operation 1. To operate the speaker using AC power, plug the 9V power adapter into a standard wall outlet. 2. To insert the power adapter connector plugs firmly into the DC IN jacks located underneath the speaker. Speaker Operation 1. To switch on the speaker, press the POWER button located on the front panel of the speaker. A blue power LED on the speaker illuminates. 2. To listen to a desired audio source through the speaker, switch on the audio device that the transmitter base is connected to. The blue LED on the transmitter illuminates. 3. Depending on location, select CHANNEL 1 or 2 on the transmitter base for optimal performance. 4. For optimal reception, ensure the transmitter and speaker receiver are approximately 21 feet apart. 21 feet 5. To locate the strongest operating frequency, press the AUTO TUNE button located on the front speaker panel. When the Auto Tune function is engaged, frequency scanning begins automatically and stops when a signal is detected. 6. You should experience interference-free speaker reception during normal room to room operation. If interference or poor signal reception occurs, press the AUTO TUNE button located on the speaker once (the blue LED indicator illuminates) to locate the strongest operating frequency. 7. If peak reception remains elusive, switch the CHANNEL setting (1 or 2) on the transmitter base, then press the AUTO TUNE button on the speaker to locate the corresponding frequency. 8. The BASS BOOST button can be used to enhance the bass sound depending on your music preferences. Turn bass / boost effect ON simply by pressing the button down on the speaker, and pressing it once again to turn it OFF. 9. To suit the needs of different users, you can mount the speaker inside your bathroom. Speaker Operation Note:
When transmitting over long distances, the audio signal becomes weaker and interference increases. If the source signal is too weak for reception, the transmitter automatically switches off after approximately four minutes to protect the unit and save power. If the source signal returns to an adequate level, the transmitter automatically switches back on. Power Off To switch off power, press the ON/OFF button on the front panel of the speaker. The transmitter will automatically switch off if there is no audio signal detected for approximately four minutes. Volume Control To adjust speaker sound level, press the +/- buttons located on the front panel of speaker until the desired volume is reached. This device must be used with the AC/DC adapter supplied in the package. Troubleshooting No Sound
- Ensure the AC adapter is securely plugged into the wall outlet and the transmitter DC IN jack.
- Ensure the speaker POWER button is in the ON position.
- Speaker batteries may be too weak. Replace with new batteries or connect with the AC/DC adapter (not supplied).
- Ensure the connected audio device is switched on and producing a signal.
- Ensure that the volume level is set to a moderate level. Distortion
- Ensure the speaker and transmitter are operating on the same frequency. If not, press the AUTO TUNE button until both units are operating on the same frequency.
- Switch the CHANNEL selector position (1 or 2) on the transmitter base and press the AUTO TUNE button the speaker until the matching frequency is reached.
- Speaker batteries may be too weak. Replace with new batteries or connect with the AC/DC adapter (not supplied).
- Ensure that the volume level is set to a moderate level.
- The audio signal input level is too low. Increase the volume level of the audio source. Specifications Transmission Mode: UHF mono Carrier Frequency: 900MHz Digital Hybrid Operation Voltage: Transmitter, DC 15V 600mA adapter Speaker, 6 x AA batteries (not supplied) or DC 9V 500mA adapter(not supplied) Frequency Response: 40Hz - 12KHz Distortion: 1%
S/N Ratio: 70dB Operating Distance: Up to 150 feet