FCC ID: 2ARWS-DC1NX Document Camera

Goose Neck Lens Auto Focus MIC Supplement Light Visualizer Design This document camera is designed for use in classrooms and meeting rooms to display live objects and work, documents, drawings, and books with great visual detail to external displays such as interactive at panels, tv displays, and projectors. DC110 Specications 1. Camera: Capture image and video 2. Supplement Light: Four white LED light 3. Gooseneck Design: Multidimensional rotate 4. WiFi Indicator Light: Green when power on, red for regular working 5. Working Modes Status: Green for USB mode, red for WiFi mode 6. Power Indicator Light: Red for low battery, Orange for under 50%, Green for full power 7. MIC: Microphone 8. Supplement Light: Three level light 9. MIC ON/OFF 10. Auto Focus 11. Anti-theft Lock 12. Power Supply: 5V/1.5A adapter 13. USB port: USB2.0 port connect to computer 14. USB Extended Port 15. Power: ON/OFF Included In The Box Visualizer Adapter USB 2.0 Cable User Manual 1 2 3 40mm 1 1 0 m m 1 3 9 m m 4 5 6 7 8 9 10 15 14 13 11 12 5 1 5 m m 3 6 m m 90mm 90mm Warnings & Precautions Do not use this unit if any of the wires, plugs, or ports are loose or broken. Be careful not to use this unit near water, for risk of shock or danger of re. Do not kink any of the wires as they may break over time. Place this unit on even, level surfaces to minimize risk of damage due to falling getcleartouch.com Adjust the camera head of this unit over the objects to be displayed until the or injury to you or someone else. best picture results are obtained. Connect the power cable to the document camera and power on, then connect the document camera to the PC or Mac with the USB cable. Launch the Canvas software and click the camera tool to view the image. System Connection 1. USB Connect Mode DC110 Wireless Set Up 1. On PC (Windows Only) Default password: 1234567890 Open network settings and choose the SSID that starts with CTI and connect to it. A. Computer uses Ethernet cable to connect to Network:

Be sure computers WiFi is enabled and use it to connect to the cameras hotspot. B. Computer uses WiFi to connect to Network:

Plug in a secondary WiFi USB adapter (Windows will automatically create a new WiFi port) and then connect to the cameras hotspot. 2. iOS and Android Devices Next, go to Settings > WiFi > CTI and connect. First, from the App Store, download the Connect DC app to view images wirelessly from the document camera. 3. Open Connect DC APP View the image from the document camera. From the iOS and Android Connect DC app, you can change the SSID and password of the document camera as well as change the resolution of the camera. You can also grab snapshots and video from the camera to your iOS device. Note: Do not use the USB cable, rather you will connect your PC (Windows Only, Mac connects only by USB cable) to the document cameras WiFi hotspot. Then launch Canvas software and click the camera tool to view the image. Scan Range Doc, book, card, Passport 3D object, etc. Image Control Brightness, exposure, saturation, contrast MIC Optional DC110 Product Specications Resolution 3648 x 2736 Working Mode Supports online & WiFi mode Frame Rate 40 fps Image Color 24 bits Scanning Size A4 Scanning Speed 1S Focus Mode Auto Focus Image Format JPG, BMP, TIF, PNG Video Format AVI, WMV Sensor CMOS Light Source Natural light, LED light Driver Driverless Port USB 2.0, USB Extension Remote Control Non-Support Power USB 5V System & Software System Requirements (Windows/Mac) Intel Compatible PC/Mac Dual Core 2.2 Ghz or better Processor 2 GB or RM (4GB preferable and 8 GB for better performance) Single, dual, or multitouch display Intel HD4000 or better or Nvidia Geforce GTX 650 or better graphics card (independent recommended over onboard) Note: The system requirements listed here are only a guideline, and your results may vary. In general, the better the specications of your computer, the better the results will be. Software installation Before installation, its recommended to close any anti-virus software, and connect the document camera to the computer via the USB cable. Download the Canvas software from https://www.getcleartouch.com/downloads-sign-up/ and install it on your computer. Troubleshooting No. Problem 1. No Image Description Solution The unit is connected by USB to the computer, but the image is not showing in the software 1. Check to see if the USB and power cables are connected properly. 2. Check to see if there is damage to the cables. 2. Unit indicator light is not on The unit is connected by USB cable to the computer, but the indicator light is not on 1. Make sure the computer is working. 2. Check the USB cable, and re-plug it in if necessary. 3. Image quality issues Image resolution, focus, or brightness are not correct 4. Image Distortion Images appear oddly shaped is defective. needed, use the supplemental LED camera light. Make sure the camera head is positioned parallel to the objects being viewed, and make sure objects are laying at on a surface under the camera head. Disclaimer Thank you for using the Clear Touch Document Camera. Please read the manual carefully before using it for the best experience. The information contained in the is document is subject to change without notice. Please dont leave the document camera outside under the bright sun or near any sources of heat. When cleaning this unit, wet a cloth with a non-corrosive cleaning agent rather than spraying directly onto the unit. Wipe down the unit with the wet cloth and then dry with a dry cloth. Do not immerse the unit in water. Doing so will cause the unit to malfunction and could pose an electrical shock risk. Avoid placing the unit in highly humid or dusty locations. Please not the following environmental conditions that are acceptable for general use:Temperature: 0C-40C (32F-104F) Humidity: 30%-85% (No Condensation) Treat the camera head of the unit with care when using it. Do not stare at the LED light in close range to avoid injury to eyes. After-sale Service and Warranty Find the warranty statement for our document cameras online at getcleartouch.com/downloads Reach our Support Department at support.getcleartouch.com/portal/newticket, or call Support at 864-643-5045 Warning: In order to use the product better, please keep a working distance of at least 20cm Warning:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF exposure compliance statement:

This device has been evaluated to meet the general RF exposure requirement This device meets all the requirement of FCC Part 15.407

SIZE: 40*60mm Document Camera MODEL: DC110 FCC ID: 2ARWS-DC1NX This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Clear Touch Solutions, Inc. Agent Authorization Company:Clear Touch Solutions, Inc. Address: 561 Keystone Avenue, Suite 821,Reno, NV 89503 USA Product Name: Document Camera Model Number(s): DC110, DC100, DC200, DC400 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Keone Trask Title:

manager Company: Clear Touch Solutions, Inc. Date:

Nov. 27, 2020

FCC ID:2ARWS-DC1NX Difference declaration We Clear Touch Solutions, Inc. , to apply for fcc id certification, the report number is:HK2009222672-E the product name is: Document Camera, and the mode number is: DC110, DC100, DC200, DC400, At present, there are many models applied by our company, but all models are only named differently, and the rest are the same. Different naming methods will not affect any performance of the product. Signature:

Name/title: Keone Trask/manager Company: Clear Touch Solutions, Inc.

Clear Touch Solutions, Inc. FCC Software Configuration Control Declaration Date: Nov. 17, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Document Camera / DC110, DC100, DC200, DC400 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name:

Keone Trask Date: 2020-11-27 Title:

manager Signature of applicant FCC Software Configuration Control Declaration Rev1.1

Clear Touch Solutions, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ARWS-DC1NX Date: Nov. 27, 2020 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices Rev 2.1 In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Keone Trask Title: manager