Portable Telephone Amplifier VOLUME TONE HI LO QH2 USER'S MANUAL
?
This telephone amplifier, which is compatible with Bluetooth headsets, is ideal for use at home, the office or while travelling to help you never miss a word. The unit cannot be used together with any phone where the keypad is located in the handset. Package Contents Telephone Compatibility Because not all telephone handsets are wired in a standard way, we have provided a 12-position compatibility switch. 1. Place the handset in the cradle. 2. Adjust the switch by turning it one "click" to the next setting. 3. Pick up the handset to listen for a dial tone. 4. Continue this process until you hear a dial tone and the microphone is functional. Once you have located the proper setting, make a note of is changed accidentally or you use your amplifier together with a different phone. in the event it it
!
The off-hook Indicator lights on each time you pick up the handset. l CHECK THE CONTENTS OF THE BOX Box should contain:
Bluetooth Amplifier Lifter and Lifter control cord (optional) 2 Telephone line cords AC Power adapter User's manual l l l l Connection & Installation 1. Unplug the handset cord from your telephone base. Insert this cord into the jack marked
. 2. Plug one side of the short phone cord (included) into the jack marked
. Plug the other end into the telephone base. 3. Set the compatibility switch to the "4" setting. This provides compatibility for most telephones. 4. Connect the AC power adapter to the power jack (located on the upper left hand side of the unit) and plug the other end into a standard AC wall outlet. 5. Pick up the handset. installed properly. If you hear a dial tone, IL95 is 1 6 Answering a Call After the headset rings, press once to answer the call. You can also answer the call using the headset or answer the call after handset is lifted automatically. MFB QH2 To end a call:
Press again. MFB QH2 6. Insert the long phone cord (included) into the LINE jack. 7. An optional handset lifter can be inserted in the LIFT jack. If you do not hear a dial tone or the person you are calling cannot hear you, consult the "Telephone Compatibility"
section. Use the headset automatically. to end a call. Handset will be lowered Volume & Tone Control You can adjust the volume level by using the Volume control slide to obtain the desired volume. You can adjust the tone by using the Tone control slide. Adjust the Tone control until you find a position that provides the clearest sound. VOLUME TONE HI LO Volume control Off-hook Indicator Tone control Bluetooth Indicator MFB Jack for base cord 12-position compatibility switch Jack for handset cord HANDSET LIFT LINE Jack for optional lifter Jack for telephone line BASE Jack for base cord 5 2 Lifter Pairing 1. Place the Bluetooth amplifier within 1 meter away from your Bluetooth headset. OnQ Q :
QH2 Press and hold blue LED flash alternately. MFB 2. for several seconds until the red and 1 2 3 1. Ringing sensor 2. Lifter height adjustment 3. Lifter indicator If the lifted is selected, plug the angle terminal of lifter control cord into the input jack on lifter, plug the straight terminal into the output jack on the base. On Bluetooth headset:
3. Use your Bluetooth headset to search for devices. For more information about your headset operation, please refer to the user manual of headset. After the connection is successful, the blue indicator on flashes, 0.1 second on and then 2.9 seconds off. QH2 Operation Turning On or Off QH2 To turn onQ , press and hold then the blue indicator flash once. After that, release the button, the power is on. for several seconds, MFB QH2 To turn off , press and hold red indicator lights on. After that, release the button, power is off. for several seconds, the the MFB 3 4 FCC Caution:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Radiation Exposure Statement:
This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IC Warning This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement 7.1.4 Radio Apparatus Containing Digital Circuits (ICES-003) Radio apparatus containing digital circuitry which can function separately from the operation of a transmitter or an associated transmitter, shall comply with ICES-003. In such cases, the labelling requirements of the applicable RSS apply, rather than the labelling requirements in ICES-003. Waring Class B digital apparatus:
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada.