Cleer Wifi Speaker Cleer Inc. Cleer WiFi Speaker User Guide powered by Amazon Alexa 2018 Sept 21st Revision 1.0 1 Cleer Wifi Speaker Cleer Inc. Versions Date 1.0 2018 /9/ 21 Modify Editio princeps Author Lianping Yang 2 Cleer Wifi Speaker Cleer Inc. Table of Content Summary .......................................................................................................................... 4 LED Behavior .................................................................................................................... 4 Power on operation .......................................................................................................... 6 WI-FI Setup ...................................................................................................................... 6 OTA operation ................................................................................................................ 16 Audio mode operation ................................................................................................... 19 3 Cleer Wifi Speaker Cleer Inc. Summary Cleer WiFi has three connection modes, Wi-Fi mode, Bluetooth mode and line-in. LED Behavior There are two groups of LEDs, Bluetooth LED at the bottom and mic interaction LEDs on top. Bluetooth LED Bluetooth LED is for the indication of three connection status, Bluetooth connected with white LED solid on, Bluetooth disconnected with LED off and Bluetooth connecting with white LED flash. MIC Interaction LEDs Twelve LEDs on top are for the indication of various interactions of cleer Wi-Fi speaker so that users can intuitively control or use the device. And various lighting indications are introduced as below and many are referred to Amazon Alexa, as the link,
(https://developer.amazon.com/zh/docs/alexa-voice-service/ux-design-attention.html#alert s) 1. Power on Two LEDs in cyan rotate clockwise in the background of the remaining 10 blue LEDs, with a period of 1.2 seconds, see image as below. After it is powered on, LED is off and device is to enter interaction. Pic 1. Power on lighting 2. RECOVERY Mode Three groups of LEDs, each group placed as , rotate and breathe. 4 Cleer Wifi Speaker Cleer Inc. Pic 2. Recovery lighting 3. IDLE modeRefer to Amazon 4. LISTEN trigger modeRefer to Amazon 5. THINKING modeRefer to Amazon 6. SPEAKING modeRefer to Amazon 7. FADE modeRefer to Amazon 8. SYSERR mode12 LEDs in yellow solid on 9. WIFIOFF mode12 LEDs in yellow solid on 10. MICOFF modeRefer to Amazon 11. ALARM modeRefer to Amazon 12. VOLUME adjustment Number and brightness of LEDs in white get increased per volume up from 0 to 12, decreased per volume down from 12 to 0 and the first LED flashes in white for three times when min volume. 13. OTA upgrading Twelve LEDs light up in green and then go to lighting mode of RECOVERY mode. 14. NETSET setup mode:
Three LEDs in yellow rotate clockwise with the period of 0.75 seconds. 15. NO_DISTURB mode 5 Cleer Wifi Speaker Cleer Inc. Twelve LEDs in purple breathe once. 15. NOTIFICATION mode refer to Amazon 16. TIMER moderefer to Amazon 17. REMINDER moderefer to Amazon
`Power on elaboration After power-on, the LEDs on the top in cyan go out, refer to pic 1. When the system is initialized, the LED will go out and the device will start to enter the interaction mode. At this moment, if the device has already set up the WIFI network, the user can perform the
"Alexa" wake-up operation; if the device has not been equipped with the WIFI network, after the booting is completed, the system enters the WIFIOFF mode, and the top MIC LEDs will be solid on in yellow, reminding the user to set up the WIFI network. WIFI setup elaboration Long tap the mode button on touch panel to enter Wi-Fi setup mode, and there will be three LEDs light up in yellow and rotate clockwise. Then open the app for other operationsas below 1. click the icon of Cleer Connect Plus 2. If it is the first time to use the app, it will enter the setup guide interface directly. 6 Cleer Wifi Speaker Cleer Inc. 2-1. Firstly, it prompts to long tap the MODE button for about 5s to enter setup mode, then click Start to next interface. 2-2. Enter the correct Wi-Fi password and then click next to start Wi-Fi setup 7 Cleer Wifi Speaker Cleer Inc. 2-3. If user wants to change the Wi-Fi, click Select other networkthen AGREE to change the Wi-Fi selection. 2-4. Next, for device to get setup, and wait for the setup result 8 Cleer Wifi Speaker Cleer Inc. 2-5. If there are several devices found for setup, there will be a selection page for user to choose. 2-6. Once you choose the device in the list, this device will response with a voice prompt. If it is right one the user wants to set up, click NEXT for next step. 9 Cleer Wifi Speaker Cleer Inc. 2-7. If the device is set up successfully, it will go to the interface where user can select a name for the device among the list or create a name, then click Done. 3. With setup done successfully, it will go back to the home page and the setup device will be shown here. 10 Cleer Wifi Speaker Cleer Inc. 4. For the device online, user can drag the volume button on the interface to adjust the volume or user can click the item to enter the detail page, where user can delete the online device. 5. Enter detail page 11 Cleer Wifi Speaker Cleer Inc. 5-1. click item 1, user can enter Alexa set up page 5-2. Item 2, user can select the sound mode. 12 Cleer Wifi Speaker Cleer Inc. 5-3. Item 3, to trigger or mute mic 5-4. Item 4, open or close follow me mode 13 Cleer Wifi Speaker Cleer Inc. 5-5. Item 5, rename the device. 5-6. Item 6, check the network details 14 Cleer Wifi Speaker Cleer Inc. 5-7. Item 7, agree or disagree to delete the device. 6. when the device is offline, it will pop up the offline dialog box, click "Continue" to go back to the home page. 15 Cleer Wifi Speaker Cleer Inc. OTA upgrading elaboration In the detail page of the app, user can check the firmware version, and if it is the latest version, it will be shown at the Firmware column;
If there is an new version, there will be a prompt in red to show the firmware info. 16 Cleer Wifi Speaker Cleer Inc. When there is an up-to-date firmware version, click the Firmware column and then AGREE to upgrade the device. After upgrading complete, it will go to the home page with the prompt of the upgrading. 17 Cleer Wifi Speaker Cleer Inc. After OTA complete, it will have the info as below. Audio mode operation elaboration Touch panel There are five function buttons on the Touch panel. 18 Cleer Wifi Speaker Cleer Inc. Volume button:
&
for volume adjustment, long tap or short tap, with LED indication. Mute button:
, for muting and initiating mic array; when muted, the mute button will be indicated in red lighting and the LED array will also be in red; when initiated, the LEDs are off. Mode switch button:
, short tap for audio modes switch; long tap for NETSET setup mode, with LED indication. Play/pause button:
for music play or pause. WiFi speaker audio mode switch After power on, the default connection mode of Cleer Wi-Fi Speaker is Wi-Fi mode, and there are three audio modes, that is 360 modewith voice prompt three sixty mode Movie mode: with voice prompt stereo mode Stereo mode: with voice prompt movie mode User can short tap on the mode switch button to change the modes. BT connection Short press the physical button at the bottom of the device to enter Bluetooth pairing mode, and Bluetooth LED will flash together with voice prompt looking for device, and after paired successfully, the device will enter BT AD2P if user stream music with mobile phone Line-in connection for streaming Plug in the line-in cable, the device will switch to line-in mode automatically, with voice prompt auxiliary mode. Please note that line-in is the least prioritized mode, so it will be closed if more prioritized connection is initiated, like Bluetooth, Wi-Fi or Alexa, etc. But it will be resumed if no more prioritized audio playback options. NOTE see Alexa functions in webpage, https://alexa.amazon.com 19 Cleer SPACE Cleer Inc. FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. During operation, the separation distance between user and the antenna shall be at least 20cm, this separation distance will ensure that there is sufficient distance from a properly installed externally-mounted antenna to satisfy the RF exposure requirements.