FCC ID: 2AY6A-C6 SMART PHONE

Table of Contents 1. PRECAUTIONS 1 2. PARTS AND BUTTONS OF THE DEVICE 2 3. TOUCH BUTTONS 3 4. INSERTING/REMOVING SIM CARDS 3 5. HOME SCREEN 4 6. QUICK NOTIFICATION PANEL 5 7. SETTINGS MENU 6 8. INSERTING/REMOVING SIM CARDS 8 9. MAKING AND RECEIVING CALLS 8 10. ANSWERING AND REJECTING CALLS 9 11. SEND MESSAGE 10 12. SOFTWARE KEYBOARD 10 13. HOW TO CONNECT TO A COMPUTER 11 14. CONNECTION TO INTERNET 11 15. MOBILE DATA AND INTERNET 12 16. BLUETOOTH 12 17. CAMERA 13 18. TROUBLE SHOOTING 14 19. FCC RF EXPOSURE INFORMATION 16 Earphone Jack Micro-USB Connector Light Distance sensor Receiver Front Camera Touchscreen Back Buttom Home Buttom App Switch Buttom Microphone Volume Button Power Button Rear Camera Flash Speaker The button moves back one step to the previous menu/page. The button returns immediately to the main screen. The button displays a menu of recently opened applications. This interface adds a CLEAR ALL button) Swipe up on the home screen to open the application list 4. INSERTING/REMOVING SIM CARDS Installingthe SIM Card and Battery Switch o your phone before installing or replacing the battery or the SIM card. Insert your ngernail into the slot at the bottom left of the back cover, and slidengernail across bottom of back cover to lift it o. 5.HOME SCREEN The home screen will look similar to the picture below. To switch between screens, simply slide your nger left or right across the display. The home screen contains shortcuts to your most-used applications and widgets. The status bar displays system information, such as current time, wireless connectivity and battery charge status. 6.QUICK NOTIFICATION PANEL When you receive a notication you can quickly view it by following the below instructions. Slide your nger from the top of the screen down to the center to access Notication Panel to see your notications. Drag the notication menu down to display the second fast access menu, the menu willlook similar to the below image. Through this menu, it is possible to modify the functions such as brightness, auto rotation, Wi-Fi, Bluetooth and more. 7. SETTINGS MENU The settings menu allows you to adjust cell phone System Conguration. To Change Settings:

Touch the Settings menu icon on the Application menu. The Settings menu will open. 2. Touch a category title to view further options. 1. Network & Internet Wi-Fi - Connect to/disconnect from wireless networks, view connection status. Mobile network - Insert SIM card and switch data. network(2G/3G/4G) Data usage - Enable/disable mobile data, view current usage, set mobile data limit.

(note: this function is available only on devices supplied with 3G card functionality.) Hotspot & tethering - Including USB tethering , Bluetooth tethering and Wi-Fi hotspot. 2. Connected devices Bluetooth - Connect or disconnect Bluetooth devices . USB - Insert the USB line to use this menu. 3. Apps & notications Notications - Adjust dierent notication settings. App info - A list of all apps downloaded and running. App permissions - View app permissions. Battery - View the status of your battery and make adjustments to power consumption. 4. Display - Adjust display settings. 5. Sound - Adjust the dierent audio settings such as ringtones. 6. Storage - View your phones internal and external storage settings. 7. Privacy - Change privacy settings 8. location - Change approximate location detection, improve search results, GPS satellites. 9. Security - Adjust phones security settings;

10. Accounts - Add or remove accounts such as your Google Account. 11. DuraSpeed - ON / OFF 12. System Language & input - add to the dictionary, edit on-screen keyboard settings, vocal search, etc. Date & time - Set date, time zone, time, clock format etc. Backup - Backup and restore data, perform factory reset, etc. Reset options - reset all perferences. 13. About Phone - Displays information about your phone. 8. INSERTING/REMOVING SIM CARDS 1. When phone is powered o insert a SIM card by removing the SIM cover as illustrated above, insert your nger in the indent located near the charging port and unclip the SIM cover, then insert the SIM card. Please take note of the direction of insertion following the diagram on the phones SIM port. 2. After inserting a SIM card, turn on the phone and wait a few minutes for your phone to display Network information. Inserting TF Card :

NB: Please ensure when inserting an SD card your phone is powered OFF 1. Insert the TF card into the TF card slot located under the SIM card cover as explained in the Inserting/Removing SIM card section. Gently push TF card into slot until it clicksinto place. 2. A prompt will be seen on the screen saying Preparing SD card. Removing TF Card:

1. Close all applications and documents which have been opened from the TF card. 2. Select Settings and nd Storage then click Unmount SD card. 3. A prompt will be seen on the screen saying SD card safe to remove. 4. Gently press the TF card to remove and pull out the TF card. 9. MAKING AND RECEIVING CALLS Once your SIM cards are installed turn on your phone and wait a few minutes for your phone to nd a network. Then select the Call icon. Here you can dial a number or select a contact from your stored contacts list to call. You can also view outgoing and incoming calls that have been made, as well as adding or removing contacts. 10. ANSWERING AND REJECTING CALLS To answer a call Slide your nger to the blue Call Answer key. To reject a Call Slide your nger to the Red Call End key. 11.SEND MESSAGE Touch the Messaging icon to other mobile phone users to send SMS or MMS, enter the name or phone number in the

"Type name or number" column, or select one from the contacts. Enter the information content and select send. 12. SOFTWARE KEYBOARD The phone has a software keyboard which automatically displays when you tap the place on screen where you want text or numbers to be entered, then simply start typing. Touchscreen The touchscreen responds to nger touch. Note:

Dont place any object on the touchscreen for it may damage or crush the screen. Single Click: Single click one icon to choose the icon or option you want. Long Press: Press and hold an icon to delete or move an icon or app,and will display APP info Widgetsshortcut menu ect. Drag: Press the icon and drag it to a dierent screen. 13. HOW TO CONNECT TO A COMPUTER Note:

Turn on your phone before connecting the phone to a PC by USB cable. 1. Use a USB cable to connect the phone with a computer. The phone will automatically detect a USB connection. 2. The USB connection menu will be displayed in the notication bar, select the desired USB operation. 3. The USB connection has been successful. 14. CONNECTION TO INTERNET Wireless:

1. Select Settings. 2. Select Network & Internet. 3. Select Wi-Fi and slide OFF to ON status. 3. All detected wireless networks in the area will be listed. Click to select desired wireless connection. 4. Enter network key if necessary. 5. Once connected to a wireless network, settings will be saved. 6. Wireless icon will appear on the taskbar when connected successfully. 7.Wireless icon will appear on the taskbar when connected successfully Note:

When the phone detects the same wireless network in the future, the device will connect tohe network automatically with the same password record. 15. MOBILE DATA AND INTERNET Please Note: Cell Data may be turned OFF as a factory setting, to allow data to ow through your network provider please turn Data usage ON either from your quick drop down menu or in > Settings

>Network & Internet >Data usage, you will not be able to access the Internet when Data usage is OFF. NB: Mobile Data charges apply when this setting is ON Data will be passed through your network provider. Web Browsing Connect to the Internet and launch the browser. Type in the desired browsing URL. 16.BLUETOOTH Select Settings, select Bluetooth from OFF to ON. Search for the device you would like to pair with and select PAIR. You will see a message Connected Successfully. 17. CAMERA Touch the icon to enter camera mode and the interface is shown as follows:

1. Touch the icon to take a photo. 2. Touch the icon to start camera recording. 3. Touch the icon on the top right to see the previous picture and to delete, share or set it as a wallpaper. Click the return button to exit camera interface. 4. Touch the icon to switch from front to back camera. 18.TROUBLE SHOOTING How to Close Applications When an application is not responding you can manually shut the app down in Running Services menu. This will ensure the system responds as desired. Please shut down all idle applications to release memory and get the system speed back to normal. To close the application, click the icon on the shortcut bar to enter the systemconguration interface. Select the ApplicationRunning and the interface is Tap the application you want to close. A pop-up window will be displayed. Tap Stop to close that application. Power OFF / Restart / Reset the Phone 1. Press and hold the power button for 5 seconds and the device will be powered down. 2. Press the reset button located under the power button with a sharp object and the device will be forced to restart. Restore Default Setting If you want to reset the phone to factory settings and erase all materials, please press Settings Backup and reset Factory data reset. WARNING:

actory Data Reset setting will delete ALL your data and system conguration as well as any downloaded apps. Please use this function carefully. 19. FCC RF EXPOSURE INFORMATION WARNINGRead this information before using your phone In August 1986 the Federal Communications CommissionFCC of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequencyREelectromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this phone complies with the FCC guidelines and these international standards. Use only the supplied or an approved antenna. Unauthorized antennas modications, or attachments could impair call quality, damage the phone, or result in violation of FCC regulations. Do not use the phone with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna. BODY-WORN OPERATION:

This device was tested for typical body-worn operations with the back/front of the phone kept 1cm from the body. To comply with FCC RF exposure requirements, a minimum separation distance of 1cm must be maintained between the user's body and the back/front of the phone, including the antenna. Third-party belt-clips, holsters and similar accessories containing metallic components shall not be used. Body-worn accessories that cannot maintain 1cm separation distance between the use's body and the back/front of the phone, and have not been tested for typical body-worn operations may not comply with FCC RE exposure limits and should be avoided. For more information about RF exposure, please visit the FCC website at www.fcc.gov Your wireless handheld portable telephone is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequencyRFsignals. In August,1996,the Federal Communications CommissionsFCCadopted RF exposure guidelines with safety levels for hand-held wireless phones. Those guidelines are consistent with the safety standards previously set by both U.S. and international standards bodies:

<ANSIC95.1>1992/<NCRP Report 86>1986/

<ICNIRP>1999 Those standards were based on comprehensive and periodic evaluations of the relevant scientic literature. For example, over 120 scientists, engineers, and physicians from universities, government health agencies, and industry reviewed the available body of research to develop the ANSI StandardC95.1

.Nevertheless, we recommend that your use a hands-free kit with your phonesuch as an earpiece or headsetto avoid potential exposure to RF energy. The design of your phone complies with the FCC guidelinesand those standards. Use only the supplied or an approved replacement antenna. Unauthorized antennas, modications, or attachments could damage the phone and may violate FCC regulations. NORMAL POSITION:

Hold the phone as you would any other telephone with the antenna pointed up and over your shoulder. RF Exposure Information:

This product is compliance to FCC RF Exposure requirements and refers to FCC website https://apps.fcc.gov/oetcf/eas/reports/

Ge-nericSearch.cfm search for FCC ID:2AY6A-C6 This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference.

(2)This device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment. Such modications could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Do not use the device with the environment which below minimum -10 or over maximum 40, the device may not work. Changes or modications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Google, Google Play, Gmail, YouTube and other marks are trademarks of Google LLC.

Label Sample and Label Location SN:C62101220000001 SIM #:8901260941127005008F IMEI1:357060076951105 IMEI2:357060076951113 m m 0 0

. 6 4 Typhoon C6 Blue 2AY6A-C6 850 / 900 / 1800 / 1900 850 / 1700 / 1900 B2 / 4 / 5 / 7 / 12 / 17 / 66 MODEL:

COLOR:

FCC ID:

GSM:

WCDMA:

FDD:

SPEC:

6.0'' QHD-IPS LCD Display 1.3GHz Quad Core CPU Rear Camera 8MP + Front Camera 2MP Dual SIM Dual Standby 1GB RAM + 32GB ROM Internal Memory INCLUDES:

C6 with battery / Date cable / Wall charger / Screen Protector 100.00mm 2.5mm 3.0mm Typhoon C6 Blue C6-20210301-0001 Typhoon C6 FCC ID:

INPUT:

GSM:

WCDMA:

FDD:

2AY6A-C6 5V 1.0A 850/900/1800/1900 850/1700/1900 B2/4/5/7/12/17/66 m m 2 5

. 4 9 SN:C62101220000001 IMEI1:357060076951105 IMEI2:357060076951113 CLOUD
MOBILE M a d e i n C h i n a 72.84mm m m 0 0

. 0 0 1 100.00mm

Cloud Mobile Holding LLC Agent Authorization Letter

(2021-04-08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize Shenzhen NTEK Testing Technology Co., Ltd. 1/F, Building E, Fenda Science Park Sanwei, Xixiang, Bao'an District, Shenzhen, Guangdong, China Alex.li alex.li@ntek.org.cn to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Edgar Navarro / Manager Date/City:

Phone:

Fax:

E-mail:

2021-04-08/ LOS ANGELES 213-443-8197 N/A enavarro@truconnect.com

Cloud Mobile Holding LLC Long Term Confidentiality Request Letter

(2021-04-08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR Product: SMART PHONE Model No.: Typhoon_C6 FCC ID: 2AY6A-C6 To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the Schematic Diagram Block Diagram Part List / BOM List / PCB Layout Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices Required to be submitted with this application be permanently withheld from public review. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. Please contact me if there is any information you may need. Sincerely, Edgar Navarro / Manager Date/City:

Phone:

Fax:

E-mail:

2021-04-08/ LOS ANGELES 213-443-8197 N/A enavarro@truconnect.com

Cloud Mobile Holding LLC Short Term Confidentiality Request Letter

(2021-04-08) Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Short Term Confidentiality Request For Product: SMART PHONE Model No.: Typhoon_C6 FCC ID: 2AY6A-C6 To Whom It May Concern:

In accordance with sections 0.457 and 0.459 of CFR 47, < Cloud Mobile Holding LLC >. requests short-term Confidentiality of following sections of this application for a period of 180 days after grant is issued. Test setup photos External photos Internal photos Users manual These documents contain detailed system and equipment descriptions and related information about the product, which < Cloud Mobile Holding LLC > considers to be proprietary, confidential, and a custom design and otherwise, would not release to the general public. Since this design is a basis from which future technological products will evolve, < Cloud Mobile Holding LLC > feels that this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give our competitors an unfair advantage in the market. Please contact me if there is any information you may need. Sincerely, Edgar Navarro / Manager Date/City:

Phone:

Fax:

E-mail:

2021-04-08/ LOS ANGELES 213-443-8197 N/A enavarro@truconnect.com

Cloud Mobile Holding LLC FCC Software Configuration Control Declaration Date: April 9, 2021 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: SMART PHONE / Typhoon_C6 FCC ID: 2AY6A-C6 Regarding FCC Country Code Selection guidelines identified in KDB 594280. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Edgar Navarro Title: Manager Signature of applicant Date: 2021/04/09 FCC Software Configuration Control Declaration