all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 1.46 MiB | August 25 2021 / February 21 2022 | delayed release | ||
1 |
|
Internal Photos | Internal Photos | 894.89 KiB | August 25 2021 / February 21 2022 | delayed release | ||
1 |
|
External Photos | External Photos | 444.99 KiB | August 25 2021 / February 21 2022 | delayed release | ||
1 |
|
Label & Location | ID Label/Location Info | 348.23 KiB | August 25 2021 | |||
1 |
|
Confidentiality Letter | Cover Letter(s) | 139.52 KiB | August 25 2021 | |||
1 |
|
Cover Letter ID | Cover Letter(s) | 116.70 KiB | August 25 2021 | |||
1 |
|
LOA Letter | Cover Letter(s) | 108.98 KiB | August 25 2021 | |||
1 |
|
TSUP | Test Setup Photos | 235.76 KiB | August 25 2021 / February 21 2022 | delayed release | ||
1 |
|
Test Report | Test Report | 865.88 KiB | August 25 2021 |
1 | User Manual | Users Manual | 1.46 MiB | August 25 2021 / February 21 2022 | delayed release |
NOVA-TS2 User Guide Version 1.0, August 2021 About This Manual NOVA-TS2 is an advanced face recognition terminal that provides highly accurate face recognition in an embedded system with the built-in thermal sensor that provides elevated body temperature detection. This manual contains the descriptions and operational instructions for NOVA-TS2 device. It is intended and written for system administrators who are in charge of overall operation including installation and management. We recommend you familiarize yourself with this manual in order to make use of the product correctly and effectively. The figures and screenshots in this guide are given for illustration purposes only and may differ from the actual product. Due to continuous technological improvements, the guide may not contain the most updated information. For further information not covered in this guide, please contact us at service@cmi-tech.com. Revision History Version Date Description Note 0.1 2021-06-18 1st draft www.cmi-tech.com
(c) 2021, all rights reserved Page ii of 35 NOVA-TS2 User Guide, 1.0 August 2021 Conventions in This Manual The following symbols are used throughout this manual. Make sure that you fully understand the meaning of each symbol and follow the instructions accompanied. Symbol Name Description Indicates information that should be followed with the utmost care. Failure to comply with a warning could cause severe damage to the equipment or injury to personnel. Indicates a potentially hazardous situation which, if not avoided, could result in equipment damage, data loss, performance degradation, or unexpected results. IMPORTANT Emphasizes essential information required for user success. Provides important supplemental information that might enhance users' understanding or alternative steps to accomplish their goals. Provides optional information to help users be more successful in their tasks. WARNING CAUTION NOTE TIP NOVA-TS2 User Guide, 1.0 August 2021 Page iii of 35 www.cmi-tech.com
(c) 2021, all rights reserved Safety Instructions Follow the safety instructions to use the product safely and prevent any risk of personal injury or damage to the product. DO NOT expose the product to direct sunlight, excess heat, open flames, corrosive gasses, moisture, or dust. Doing so may cause electrical shock, electrical short, or fire. DO NOT install the product near heaters, air conditioners, electrical fans, refrigerators, or water. Doing so may create the risk of a short circuit or fire caused by water or condensation that may come into contact with the product. DO NOT install the product in an environment that is susceptible to explosion. DO NOT let any type of liquid, mists, or sprays get into the product. Doing so may cause electrical shock, electrical short, or product damage. If smoke, odors or noise rise from the device, stop using the device immediately, disconnect the power cable, and contact our customer support. DO NOT attempt to dissemble, repair, or modify the device yourself. Opening or removing covers may expose you to electrical shock or other risks and may void your warranty. If the product does not work correctly, contact your dealer or our customer support. WARNING Choosing Location Operation Maintenance CAUTION Choosing Location Keep the front side of the device away from strong ambient light, direct sunlight, or both. Sunlight, halogen lamps or other strong illumination may degrade the performance of the device, that is, increase in failure-to-capture rates or occasional authentication problem. DO NOT install the product outdoors unless environmental factors such as water, temperature, or sunlight in the location are controlled by means of proper protection. DO NOT expose the product to high electro-magnetic radiation. Device failure or performance degradation may occur caused by electro-magnetic interference. DO NOT install the product next to devices that contain magnets or generate magnetic fields such as speakers. Device malfunction or performance degradation may occur caused by magnetic interference. www.cmi-tech.com
(c) 2021, all rights reserved Page iv of 35 NOVA-TS2 User Guide, 1.0 August 2021 Installation DO NOT install the product on a surface subject to vibration or physical shock. Doing so can cause damage to the product. When you install the product on a wall, make sure that you secure the product with the provided fasteners. Dropping from the wall may cause damage to device casing, internal parts, or both. DO NOT install the power supply cable in a high-traffic area where people pass by. Doing so may create a trip hazard and cause the cable to become worn or frayed. Use only a power cord set complying with the national regulation of the countries intended for sale. Use only the power adapter which is either provided or approved by CMITECH for the product to operate properly and safely. DO NOT connect multiple devices to one power adapter. Overload on power adapter may cause over-heat or fire hazard. DO NOT use any type of extension cord to connect the product to a power supply. Operation Maintenance DO NOT use any sharp tools when pressing the buttons to prevent damage to the touch screen from scratches or cuts. When cleaning the product, wipe the product with a soft and dry cloth. Do not apply water, benzene, alcohol, or spray cleaner. These may cause product failure or fire. NOVA-TS2 User Guide, 1.0 August 2021 Page v of 35 www.cmi-tech.com
(c) 2021, all rights reserved Contents About This Manual . ii Revision History. ii Conventions in This Manual . iii Safety Instructions . iv 1. Introduction to NOVA-TS2 . 1 1.1. Features . 1 1.2. Components . 2 1.3. Operating Description . 4 1.3.1. Block Diagram . 4 1.3.2. Schematics. 6 2. Installing NOVA-TS2 . 8 2.1. Installation Requirements . 8 2.1.1. Environmental Requirements . 8 2.1.2. Electrical Requirements. 9 2.1.3. Tool Requirements . 10 2.2. Installation Procedure . 11 2.2.1. Mounting Device (Wall Mount). 11 2.2.2. Mounting Device (Gang Box Mount) . 13 2.2.3. Connecting Cables . 14 3. Using NOVA-TS2 . 19 3.1. Enrollment . 19 3.2. Authentication . 20 4. Product Specifications . 22 4.1. Mechanical Specifications . 22 4.1.1. Dimensions (unit: mm). 22 4.2. Technical Specifications. 23 4.2.1. Face recognition terminal . 23 4.2.2. Thermal Sensor . 24 4.2.3. Cables and Connectors . 25 4.3. Environmental Specifications . 26 Appendix A: OSD Menu List . 27 A.1. User . 27 A.2. Device . 27 A.3. Communication . 29 A.4. Display . 30 A.5. Authentication . 30 www.cmi-tech.com
(c) 2021, all rights reserved Page vi of 35 NOVA-TS2 User Guide, 1.0 August 2021 A.6. Log . 31 Appendix B: Legal Information . 32 B.1. Disclaimer . 32 B.2. Copyright Notice . 33 Appendix C: Regulatory Information . 34 C.1. Certification and Safety Approvals FCC Compliance Statement . 34 Appendix D: Contact Information . 35 NOVA-TS2 User Guide, 1.0 August 2021 Page vii of 35 www.cmi-tech.com
(c) 2021, all rights reserved 1. Introduction to NOVA-TS2 NOVA-TS2 is a face recognition terminal that provides face recognition in an embedded system with real-time subject finding and local authentication for high throughput access control and time & attendance applications. The built-in thermal sensor provides infrared imaging technology for detecting elevated human body temperature. 1.1. Features The key features of NOVA-TS2 are shown in the following table:
Feature Description Advanced real time subject tracking with simple user instructions NOVA-TS2 accurately locates the subject face in real time and tracks in 2 sides of angle to provides wider and deeper positioning. Allows height range of 145 to 210 cm Wide angle face imaging for outstanding capture volume Utilization of ultra-high performance face matching engines Supplemental display of authorization results Advanced, dedicated co-processor allows utilization of latest and most powerful face algorithms. Can display authorization decision when coupled to access control provisioning logic so that subject recognized, but not granted permission information can be displayed. Supports multiple languages in GUI English, Korean, Simplified Chinese, Traditional Chinese, Japanese, Arabic, Spanish, Italian, Turkish, French Large on-board (embedded) face template database Store up to 20,000 active face templates on-board in 1:1 recognition (verification) identification mode. Store up to 20,000 active face templates on-board in 1:N identification mode. High speed face matching Can provide up to 20,000 matches per second on-board. Use in widest range of lighting conditions Embedded illuminators in both white and NIR ranges expand use in adverse ambient light environments. Standard multi-band RFID reader MiFare, DesFire, FeliCa card support with standard embedded ISO/IEC 14443 reader. Full range of deployment options Standard connections in include selectable Wiegand IN or OUT, GPI, RS 485, and contact relay. Supports full integration with CMID Manager for distributed access control and T&A solutions on single network. Fully compatibility with CMITech CMID Manager v2 access control and T&A solution software Body temperature screening Detects elevated skin temperature using infrared thermography against a probable fever. www.cmi-tech.com
(c) 2021, all rights reserved Page 1 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Feature Description A variety of access control options Combined with temperature screening and mask detection, Nova-TS allows for a different level of access depending on the application such as a thermal bypass mode without authentication or a mask-wearer-only mode. 1.2. Components Before you begin, make sure that all the following items are included with your device. If you find anything is missing, contact your dealer. NOVA-TS2 User Guide, 1.0 August 2021 Page 2 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Table 1. NOVA-TS2 component table Name Quantity Description Note Face recognition terminal Installs the unit on a wall or on an outlet box Gives brief instructions and information needed for product use and installation Prevents currents in unintended directions (See Relay Connection for an example of its use) NOVA-TS2 Mounting Plate Quick Guide Diode Power cable Relay cable GPI cable Wiegand cable RS-485 cable Cables AC adapter Power code (optional) 1 1 1 1 1 1 1 1 1 1 1 Output:
15VDC, 3.0A www.cmi-tech.com
(c) 2021, all rights reserved Page 3 of 35 NOVA-TS2 User Guide, 1.0 August 2021 2. Installing NOVA-TS2 This chapter gives the information about the requirements and the prerequisites for installing NOVA-TS2 and the installation procedures. 2.1. Installation Requirements Before installation, make sure that the following requirements are met. 2.1.1. Environmental Requirements The NOVA-TS2 is designed and intended for indoor use only. The device is not weatherproof and must not be exposed to water, ice, extreme temperatures or other adverse weather conditions. If it is required to use the device in outdoor or extreme environments, contact local sales or service@cmi-tech.com for more information. Avoid the location that is exposed to backlight, direct sunlight, and other strong illumination. Choose the location with moderate ambient light. Environmental requirements Determine the height at which you install the device. The recommended mounting height is 135 cm (53 inches) from the floor to the bottom of the device. It covers a persons height from 140 cm (55 inches) up to 190 cm (75 inches) at the distance of 55 cm (22 inches) from the device. NOVA-TS2 User Guide, 1.0 August 2021 Page 8 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Recommended mounting height 135cm 120 cm Default Mounting b racket (optional) 2.1.2. Electrical Requirements Use a stable power supply adapter of DC 15V ( 5%) with a minimum 2A. Make sure that the power cable is as short as possible and have correct wire gauge (22 AWG or smaller in number) Use CAT5 or later for ethernet cable. Table 2. Power requirements depending on cable length and wire gauge Input voltage
(V) Wire gauge
(AWG) Power cable length (m) Recommended Maximum Note 12 15 24 16 18 20 22 20 22 20 22 26.3 15.9 10.0 6.3 25.0 15.7 70.1 44.0 37.9 23.8 15.0 9.4 23.6 105.1 66.0 37.5 Standard Configuration www.cmi-tech.com
(c) 2021, all rights reserved Page 9 of 35 NOVA-TS2 User Guide, 1.0 August 2021 2.1.3. Tool Requirements The following tools can be necessary for installation and are not supplied by default. Table 3. Required tools Purpose Name Figure Note Cross head For measuring the installation height Electric drill With a drill bit and anchor bolts Screw driver Tape ruler Cutting plier General Concrete wall mount Marker Hammer NOVA-TS2 User Guide, 1.0 August 2021 Page 10 of 35 www.cmi-tech.com
(c) 2021, all rights reserved 2.2. Installation Procedure 2.2.1. Mounting Device (Wall Mount) You can install the device onto a wall directly by using the mounting plate. 1. Remove the screw that attaches NovaFace to the mounting plate and disassemble the plate. Keep the screw because it will be used to attach them again. 2. Put the mounting plate at the predetermined position and attach the plate onto the wall with the screws (M4 x 8). Wall mounting points www.cmi-tech.com
(c) 2021, all rights reserved Page 11 of 35 NOVA-TS2 User Guide, 1.0 August 2021 For concrete wall mount, do the steps that follow:
1. Put marks on the wall through the holes of plate by using a marker. 2. Drill the marked points by using a electric drill. 3. Attach the anchor bolts to the holes by using a hammer. 4. Attach the plate to the wall with the screws. 3. Connect the power cable and peripherals cables, if necessary, to the connectors in the rear panel. (See Connecting Cables for more information) 4. Remove one or more plastic tabs to allow the wire routing and let the cables go through the openings. Removable tabs 5. Put the device onto the installed plate, slide it downward, and attach them with the screw
(M3 x 6) NOVA-TS2 User Guide, 1.0 August 2021 Page 12 of 35 www.cmi-tech.com
(c) 2021, all rights reserved 2.2.2. Mounting Device (Gang Box Mount) You can also install the device on a gang box (outlet box) by using the mounting plate. 1. Remove the screw that attaches NovaFace to the mounting plate and disassemble them. Keep the screw because it will be used to attach them again. 2. Put the mounting plate onto the gang box and attach it to the box with the screws (M4 x 8). Gang box mounting points Make sure that the outgoing cables from the gang box go through the rectangular opening in the plate. 3. Connect the power cable and peripherals cables, if necessary, to the connectors in the rear panel. (See Connecting Cables for more information) 4. Put the device onto the installed plate, slide it downward, and assemble them with the screw (M3 x 6) www.cmi-tech.com
(c) 2021, all rights reserved Page 13 of 35 NOVA-TS2 User Guide, 1.0 August 2021 2.2.3. Connecting Cables Power Connection DC Power suppl y Network Connection RJ-45 connector for 10/100/1000Base-T Ethernet communication, minimum CAT5 cable. NOVA-TS2 User Guide, 1.0 August 2021 Page 14 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Relay Connection Dead-Bolt Type Door Lock There are two types of dead-bolt door lock connections and configuration supported fail-safe and fail-secure. Use different power supplies for the NovaFace and the door lock. Install the diode at both ends of the circuit as shown in the figure below close to the door lock to protect the relay contact from the reverse current that occurs when the door lock works. Make sure that the diode direction is correct. Fail-Safe Configuration www.cmi-tech.com
(c) 2021, all rights reserved Page 15 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Fail-Secure Configuration Relay Connection Automatic Door NOVA-TS2 User Guide, 1.0 August 2021 Page 16 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Relay Connection Alarm Light Internal relay interface with nominal switching capacity of 1 A, 30 VDC or 0.3 A, 120 VAC, resistive load. GPI Connection www.cmi-tech.com
(c) 2021, all rights reserved Page 17 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Wiegand IN Connection Wiegand OUT Connection NOVA-TS2 User Guide, 1.0 August 2021 Page 18 of 35 www.cmi-tech.com
(c) 2021, all rights reserved 3. Using NOVA-TS2 3.1. Enrollment This section gives the procedural information to enroll users to the device. 1. Press the User button (
) on the main screen. 2. Press Enroll (
) in the bottom. 3. Type ID and Name. 4. Press one or more credential type buttons (Face, Card) to add to the user. For Face, let the user stand in front of device and complete the face capture. For Card, put the card on the devices card reader. When the CSN (card serial number) appears on the screen, press OK. Optionally, select Bypass card to allow the user to get access permission by using a registered card alone regardless of authentication mode 5. Press OK to complete the enrollment. www.cmi-tech.com
(c) 2021, all rights reserved Page 19 of 35 NOVA-TS2 User Guide, 1.0 August 2021 3.2. Authentication NOVA-TS2 detects and displays the subjects face over 2.0 meters from the system on the high-resolution color display. The subject will simple and naturally walk toward the face capture range of 0.4 to 2.0 meter. Once the system recognizes the subject, the result will be displayed immediately with indication line over the subjects face image. Figure 1. Authentication overview NOVA-TS2 User Guide, 1.0 August 2021 Page 20 of 35 www.cmi-tech.com
(c) 2021, all rights reserved 1. Go near and look at the device. White box appears around the face when your face is detected. 2. Authentication result is displayed on the top of the screen depending on whether your face is recognized successfully. www.cmi-tech.com
(c) 2021, all rights reserved Page 21 of 35 NOVA-TS2 User Guide, 1.0 August 2021 4. Product Specifications 4.1. Mechanical Specifications 4.1.1. Dimensions (unit: mm) 74 43 54.5 Wall Plate 1/420 UNC
(Depth:5.5) 2 4 1 5
. 5 0 1
. 5 1 7 3 5 2 2 8 NOVA-TS2 User Guide, 1.0 August 2021 www.cmi-tech.com
(c) 2021, all rights reserved 60 Page 22 of 35 4.2. Technical Specifications 4.2.1. Face recognition terminal Item CPU Face recognition system Description ARM Cortex A53 OctaCore (8 core) operating at 1.4GHz Memory 2GB RAM, 8GB Flash Number of cameras Two 5 LCD with touch Display IR LED White LED Ethernet Dimensions Weight YES, for low ambient light levels and supplementary face detection support YES, for adjunct lighting of face Standard 10/100 BaseT and GigE 100 x 200 x 36 mm 450 g (1 pounds) Capture range 40 cm - 200 cm Users height range 145 cm - 210 cm (with system installed at 135 cm) Enrollment speed About 5 seconds Recognition speed About 1 second total in 1:N mode with 20,000 subjects in local database Enrollment 20,000 users total DB size(Max 20,000 users in 1:N mode) Fake face detection YES Temperature range
-20C - 45C, operating YES (Speaker only) DC 15V Audio Power RF Card reader Connections ISO/IEC 14443 reader for MiFare, DesFire and FeliCa cards. standard RJ45 for LAN, Wiegand IN/OUT, GPIO (3), RS485, dry contact relay, SIM Socket (optional) USB Only for host / service modes www.cmi-tech.com
(c) 2021, all rights reserved Page 23 of 35 NOVA-TS2 User Guide, 1.0 August 2021 4.2.2. Thermal Sensor Item Description Thermal sensitivity 0.5 deg. C) Initial temperature stabilization time 120 minutes (only once at set up or system turn-on) Alarm setting Configurable setting of alarm value above baseline temperature Thermal imaging Process displayed on LCD Certifications Operating temperature range CE, FCC, KC 15 to 35 deg C Measuring the temperature out of this range may compromise the accuracy) NOVA-TS2 User Guide, 1.0 August 2021 Page 24 of 35 www.cmi-tech.com
(c) 2021, all rights reserved 4.2.3. Cables and Connectors Relay 300 mm 15 mm Pin Name Normal Open (NO) Common (COM) Normal Close (NC) Color Black Red Gray Wire Gauge 24 AWG 300 mm 15 mm 300 mm 15 mm Color Red Green Yellow Black Color Red Green Black Wire Gauge 24 AWG Wire Gauge 24 AWG GPI 1 3 1 4 1 3 1 2 3 1 2 3 4 1 2 3 Pin Name GPI 0 GPI 1 GPI 2 Ground (GND) RS-485 Pin Name DATA (-) DATA (+) Ground (GND) www.cmi-tech.com
(c) 2021, all rights reserved Page 25 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Wiegand IN/OUT Pin Name 1 2 3 4 5 IN DATA 0 IN DATA 1 OUT DATA 0 OUT DATA 1 Ground (GND) Power Color Green White Blue Gray Black Wire Gauge 24 AWG 200 mm 10 mm 5.5mm (-) 2.5mm (+) 18 AWG 4.3. Environmental Specifications Item Description Note Temperature Operating 5C to 35C (40F to 95F) Humidity Operating Non-operating Non-operating
-40C to 60C (-40F to 140F) 8% to 85% relative humidity, non-condensing 8% to 90% relative humidity, non-condensing NOVA-TS2 User Guide, 1.0 August 2021 Page 26 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Appendix A: OSD Menu List This appendix gives the details about advanced setting menus of NovaFace device that appears when you press the Gear button (
) on the main screen. Description Starts user enrollment Deletes users Finds users by ID Edits user information by pressing an registered user A.1. User Name Enroll Delete Modify Search Name Bio A.2. Device Fake face Use mask Mask alarm Description Selects a fake face detect option (Not used, Level low, Level high) Selects whether to use mask detection Selects the type of action that the device should take when no mask is detected (Not used, Warning message, Access deny) Face image log Selects whether to show face image on event log www.cmi-tech.com
(c) 2021, all rights reserved Page 27 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Name Sound Speaker volume Adjusts the speaker volume Date/Time Time settings Configures device date and time Door Relay Selects whether to use relay Description Open duration Configures time duration for door open relay Use exit Exit type Use alarm Alarm type Use sensor Sensor type Tamper Mode Selects a GPI port number connected to exit door button (Not used, GPI Port 1, GPI Port 2, GPI Port 3) Selects contact state of the GPI port that exit door button uses (NC, NO) Selects a GPI port number connected to alarm sensor
(Not used, GPI Port 1, GPI Port 2, GPI Port 3) Selects contact state of the GPI port that alarm sensor uses (NC, NO) Selects a GPI port number connected to sensor (Not used, GPI Port 1, GPI Port 2, GPI Port 3) Selects contact state of the GPI port that sensor uses
(NC, NO) Selects a tamper protection mode (Not used, Beep mode, Secure mode) If you select Secure mode, all the data and settings are deleted permanently in device when a physical tampering is attempted. Device info Device name Configures the device name Model FW version APP version MAC S/N Shows the model name Shows the device firmware version Shows the application version Shows the MAC address Shows the serial number IOMicom version Shows the IO Micom revision number H/W version Shows the hardware revision number RFMicom version Shows the RF Micom revision number Algo version Shows the algorithm revision number NOVA-TS2 User Guide, 1.0 August 2021 Page 28 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Name Description Database User import Imports the user database from connected USB drive User export Exports the user database to connected USB drive Debug export Exports the debug data to connected USB drive LED signal Configures LED signal through EF-IO (Under development) Camera Camera mode Configures the power supply frequency of an electric light where the camera is used (50Hz, 60Hz) Reset Device reboot Restarts device Factory reset Resets all configuration settings and deletes all user data Thermal sensor Reset all config Sets all configuration settings to default Reset all users Deletes all user data Use sensor Selects whether to use thermal sensor Temperature unit Selects temperature scale (Celsius, Fahrenheit) Alarm temperature Configures elevated temperature alarm threshold Alarm low temperature Configures low temperature alarm threshold Alarm action Selects the type of action that the device should take when high temperature is detected (Not used, Warning message, Access deny) Offset Calibrates temperature offset value A.3. Communication Name TCP/IP Description User DHCP Selects whether to use DHCP IP Subnet Gateway DNS 1 DNS 2 Shows the devices IP address Shows the subnet mask Shows the gateway address Shows the DNS #1 Shows the DNS #2 www.cmi-tech.com
(c) 2021, all rights reserved Page 29 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Name Server Description User server Selects whether to use server Server IP Types the servers IP address Port Types the servers port number Commute Uri Type server URI to receive T&A event logs from device Sync Uri Accept Uri Type server URI to receive T&A event logs backed up by device while server is offline Type server URI where device sends request to check periodically if server is online Configures the serial communication settings (Under development) Serial A.4. Display Name Language Time display Menu timeout Description Selects a display language Selects time notation between 12-hour and 24-hour clock format
(12 Hours, 24 Hours) Select timeout for auto exit from menu display after leaving it untouched Screensaver Selects whether to use screensaver A.5. Authentication Name Description Auth mode Mode Selects a authentication mode (Face only, Face or card, Face and PIN, Card and face, Card an PIN) Bypass Allows unregistered users to access Mask reject Denies access if wearing a mask is deteced Touch start Starts recognition by touching the screen Recog threshold Adjusts match threshold Increasing the value increases FRR(false rejection rate) whereas descreasing the value increases FAR(false acceptance rate). TA Use T&A Selects whether to use T&A NOVA-TS2 User Guide, 1.0 August 2021 Page 30 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Name Description Admin password Use admin password Selects whether to use admin password Card Selects whether to use card serial number Password Use CSN Types admin password CSN order Selects CSN order on card reading (MSB, LSB) Wiegand Output type Selects Wiegand output type (Wiegand, Card, ID) A.6. Log Name Description Log info Total used Shows the used space for logs in percent Total count Show the total count of logs Log delete Delete log Deletes all the logs www.cmi-tech.com
(c) 2021, all rights reserved Page 31 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Appendix B: Legal Information B.1. Disclaimer The words of which the initial letter is capitalized have meanings defined under the following conditions. The following definitions shall have the same meaning regardless of whether they appear in singular or in plural. For the purposes of this Disclaimer:
Company (referred to as either "the Company", "We", "Us" or "Our" in this Disclaimer) refers to CMITech Co. Ltd. You means the individual accessing the Product, or the company, or other legal entity on behalf of which such individual is accessing or using the Product, as applicable. Product means the electronic device provided by the Company named NovaFace and its manual. The information contained on the Product is for general information purposes only. The Company assumes no responsibility for errors or omissions in the contents of the Product. In no event shall the Company be liable for any special, direct, indirect, consequential, or incidental damages or any damages whatsoever, whether in an action of contract, negligence or other tort, arising out of or in connection with the use of the Product or the contents of the Product. The Company reserves the right to make additions, deletions, or modifications to the contents on the Product at any time without prior notice. The Product may contain links to external websites that are not provided or maintained by or in any way affiliated with the Company. Please note that the Company does not guarantee the accuracy, relevance, timeliness, or completeness of any information on these external websites. The information given by the Product is for general guidance on matters of interest only. Even if the Company takes every precaution to insure that the content of the Product is both current and accurate, errors can occur. Plus, given the changing nature of laws, rules and regulations, there may be delays, omissions or inaccuracies in the information contained on the Product. The Company is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information in the Product is provided "as is", with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. The Company will not be liable to You or anyone else for any decision made or action taken in reliance on the information given by the Product or for any consequential, special or similar damages, even if advised of the possibility of such damages. NOVA-TS2 User Guide, 1.0 August 2021 Page 32 of 35 www.cmi-tech.com
(c) 2021, all rights reserved B.2. Copyright Notice All rights reserved. This documentation is copyrighted by CMITech Co., Ltd. No part of this guide may be reproduced, transmitted, or transcribed without the expressed written permission from CMITech Co., Ltd. All other product names, trademarks, or registered trademarks are property of their respective owners. We reserve the right to make any alterations which may be required due to technical improvement. For the most current information, contact your CMITech representative. www.cmi-tech.com
(c) 2021, all rights reserved Page 33 of 35 NOVA-TS2 User Guide, 1.0 August 2021 Appendix C: Regulatory Information C.1. Certification and Safety Approvals FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antennae -Increase the separation between the equipment and the receiver -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC RF Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-
transmitter product procedures NOVA-TS2 User Guide, 1.0 August 2021 Page 34 of 35 www.cmi-tech.com
(c) 2021, all rights reserved Appendix D: Contact Information CMITech Company, Ltd. 5F, 38, Burim-ro 170beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do, 14055, Republic of Korea Tel: +82-70-8633-8278 Fax: +82-31-624-4490 Contact: sales@cmi-tech.com CMITech America, Inc. 2033 Gateway Place, Suite 500 San Jose, CA 95110 USA Tel: (1) 408 573-6930 www.cmi-tech.com
(c) 2021, all rights reserved Page 35 of 35 NOVA-TS2 User Guide, 1.0 August 2021
1 | Internal Photos | Internal Photos | 894.89 KiB | August 25 2021 / February 21 2022 | delayed release |
1 | External Photos | External Photos | 444.99 KiB | August 25 2021 / February 21 2022 | delayed release |
1 | Confidentiality Letter | Cover Letter(s) | 139.52 KiB | August 25 2021 |
CMITECH Co., Ltd.
5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu, Anyang-si,
Gyeonggi-do,14055, Republic of Korea
File Name
[NOVA-TS2] BLK
[NOVA-TS2] SCH
[NOVA-TS2] OpDes
[NOVA-TS2] Part List
Federal Communications Commission
Authorization and Evaluation Division
Confidentiality Request regarding application for certification of FCC ID: 2AJY5NOVA-TS2
Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request confidential
treatment of information accompanying this application as outlined below:
Exhibit Type
Block Diagram
Schematics
Operational Description
Part List
The above materials contain trade secrets and proprietary information not customarily released to
the public. The public disclosure of these materials may be harmful to the applicant and provide
unjustified benefits to its competitors.
The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this
application and all accompanying documentation will not be made before the date of the Grant
for this application.
In additional to above mentioned documents, in order to comply with the marketing regulations
in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that
business sensitive information remains confidential until the actual marketing of newly
authorized devices, we request Short Term Confidentiality of the following attachment(s);
Exhibit Type
External Photos
Internal Photos
Test Setup Photos
Manual
File Name
[NOVA-TS2] EXT Photo
[NOVA-TS2] INT Photo
[NOVA-TS2] Test Setup Photo
[NOVA-TS2] Manual
For 45 days, pursuant to Public Notice DA 04-1705.
For 180 days pursuant to KDB 726920 D01.
OR
Sincerely,
jung-hee Kim / Manager
1 | Cover Letter ID | Cover Letter(s) | 116.70 KiB | August 25 2021 |
CMITECH Co., Ltd. Aug 23, 2021 Applicant: CMITECH Co., Ltd. FCC ID: 2AJY5NOVA-TS2 To. Whom it may concern:
We, Sena Technologies,Inc. declare that the two products differ in size depending on the FM function. Please refer to the table as below. Model name Difference Basic model NOVA-TS2 Family model NOVA-TS2K Software function difference from basic model NovaFace-2 Removed thermal sensor camera NovaFace-2K Removed thermal sensor camera, Software function difference from basic model jung-hee Kim / Manager
1 | LOA Letter | Cover Letter(s) | 108.98 KiB | August 25 2021 |
CMITECH Co., Ltd.
Aug 23, 2021
FEDERAL COMMUNICATIONS COMMISSIONS
Authorization and Evaluation Division
7435 Oakland Mills Road
Columbia, MD 21046
Letter of Authorization
We, the undersigned, hereby authorize Kenneth Kim of NCT Co.,Ltd. to act on our behalf in all manners relating to
application for equipment authorization for FCC ID: 2AJY5NOVA-TS2 including signing of all documents relating to
these matters.
Any and all acts carried out by Kenneth Kim of NCT Co.,Ltd. on our behalf shall have the same affect as acts of our
own. This authorization is valid until further written notice from CMITECH Co., Ltd.
“I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits,
pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a).”
Sincerely,
jung-hee Kim / Manager
CMITECH Co., Ltd.
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2021-08-25 | 13.56 ~ 13.56 | DXX - Part 15 Low Power Communication Device Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2021-08-25
|
||||
1 | Applicant's complete, legal business name |
CMITECH Co.,Ltd.
|
||||
1 | FCC Registration Number (FRN) |
0025949637
|
||||
1 | Physical Address |
5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu
|
||||
1 |
Anyang-si Gyeonggi-do, N/A
|
|||||
1 |
South Korea
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
t******@timcoengr.com
|
||||
1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AJY5
|
||||
1 | Equipment Product Code |
NOVA-TS2
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
j****** k********
|
||||
1 | Telephone Number |
+82-7********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
j******@cmi-tech.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 02/21/2022 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DXX - Part 15 Low Power Communication Device Transmitter | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Face Camera | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
NCT Co., Ltd.
|
||||
1 | Name |
K******** I********
|
||||
1 | Telephone Number |
+82-3********
|
||||
1 | Fax Number |
+82-3********
|
||||
1 |
i******@nct.re.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 13.56000000 | 13.56000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC