FCC ID: 2AJY5UMX-10 IRIS Camera

User grap Some of t www.cmi-

Copyright MX10 UM NextG Iris sReco ognitio U User Man

(v0.1

.1, July 1 Gener onSys nual 1, 2016) ration stem Intuitiv ve face dis splay pos sitioning Interna al automa atic moto rized tilt c cameras upport ind dependen nt input a and outpu ut RS485 Su ons LAN / R functio Option nal face im mage cap ture and face reco ognition phics and scree the contents in en shots in this n this manual m s guide may va may differ from al ary from actua rating library r m current ope release

-tech.com t 2016,allrigh htsreserved v0.1.1 July2016 Introd duction to the U UMX-10 Iris Reco ognition This ne in a com a wide w iris recog mpact and range of id gnition sys elegantly dentity man stem offers designed i nagement s highly intu dentificatio application uitive, hand on and aut ns. System biometrics ds-free iris thentication n terminal s imaging for use in The fro the use position merely then m the bra capture are very interact nt facing n ers face im ning for pr puts his or oves towa ckets in th e is fast and y simple, a t with the s nominal 5.0 age for fas roper iris im r her face i rd the syst e display to d automati lmost all su system with 0 inch LCD st, easy and mage captu n the cente em to size o be in pro ic. While u ubjects wil hout any d display serves to d tural d highly na ubject ure. The su CD, and er of the LC head to his or her

. Image oper range. user instruc ctions o l be able to directions. UMX-

Iris R

-10 Next Genera Recognition Syst ation tem And the over a r desktop e internal a range of 50 p, wall mou automatic t 0 cm (abou unt or kios tilt mechan ut 20 inche k installatio nism adjust es), making ons. ts to the us the UMX-

sers height 10 ideal fo t or vertica or counterto al position op, The UM machin connec and ma decisio connec MX-10 is an ne control i ctivity to ho atching is ty ns are mad ctions for d n embedde s performe ost systems ypically pe de locally fo edicated, l ed terminal ed on the in s is through erformed o or fast resp ocal comm

, which me nternal Lin h TCP/IP (E n-board as ponsivenes munications eans that a ux-on-ARM Ethernet). A s well, so id ss. For acce s to door c ll image pr M mainboa And iris bio dentificatio ess control ontrollers o and rocessing a al ard. Typica coding ometric en entication on or authe Wiegand

, there are or panels. For all s specificatio ons, please see Specif fication sec ction. mplete dep s and On-B For com Screens ll UMX-10 piction of a mo Applicat Board Dem www.cmi Copyright itech.com t2016,allrigh htsreserved on-board ion manu screens, se al. ee UMX-10 0 LCD Con trol UM MX10UserMa anual,v0.1.1 July2016 eatures Key F user interfac Iris u Con tactless iris rnal, autom Inte Posi itioning guid er language othe Simu ultaneous d On-

board iris e 1:1 (

(authenticat Opt ional Comb F Face as prim t to iris recog S Supplement f face recogn Sup ports dual f Opt imized imag Opt imized imag Sup ports imagi Kens sington lock Stan ndard comm

, dual Wiega 232, Con nection cab Exte ernal audio c Tam mper switch o Acce ess control (

grated Sma Integ Mee ets CE mark, 1979 94-6 2011 s Desi ign and pro itive LCD di range of 35 d iris camer lizations sel with .wav fil ognition wit d matching,

(identificati nd Iris mod ity, with face ce with intu imaging at atic face an dance vocal s available w dual iris reco ncoding and tion) or 1:N ined Face a mary modali gnition tal face reco nition follow factor authe ging for diff ge capture f ng of all iris k slot standa munications and I/O, TTL bles with pre connector on rear pan

(AC) configu rt Card read

, FCC, IEC 62 standard oduction me eet ISO 9001 ognition in c ws iris recogn entication w ficult ambie for most sun s colors ard connectors L, and dry co ess-in conne nel uration inclu der (choice 2471 eye sa like smart p phone selfi e nominal hei elay time. E ight range o nglish stand of 50 cm dard, all d of under 1 e of up to 1 1 second 10,000 users s in either positioning, stand-off anism with n

/ off and de on pture speed nal data bas splay face p 5 to 45 cm s ra tilt mecha ectable on /

e substitutio h typical cap

, with intern on) modes des:

e recognitio case of iris r nition attem ith card or P nt lighting c nglasses, gla recognition mpt PIN conditions asses, and f acial veils on rejects de ecisions aut omatically s switch over failure-to-c capture (FTC C), so that and protoc cols for TCP/

y ontact relay ectors includ ded in acces ssories kit

/IP (Etherne et RJ-45), RS S-484 and -

udes wall m of basic MiF fety, and Ro mount plate Fare / DesFi oHS standar 1 2011 stand dard re card or H rds. Iris reco HID multi-cla ognition me ass reader) eets ISO www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 ssories K Kit Acces Includes s:

Power su upply (IEC C 13 female) Power co connect ord (IEC C14 or type by c 4 male), pow ountry wer side Basic Mi iFare / DesFi l)

(internal re card read der Standard d back cover r Wall mo ount bracket ID I/O ca device, a connect Includes dry cont ables with p and pig tails ions s cables for R tact relay AC I/O c device, a connect Includes 232, TTL cables with p and pig tails ions s cables for W L (2), dry con Ferrite c ore and diod de ush in conne ectors for for external RS 485, RS 2 32, TTL (2), push in conn nectors for for external Wiegand (2), ntact relay

, RS 485, RS ver / plate sc crew (M4) (n not security Back cov type) www.cmi Copyright itech.com t2016,allrigh htsreserved ID MManagement t Version Ac ccess Contro

&

& Attendance ol and Time e Versions Yes Yes No Yes No Yes No Yes Yes Yes s Yes s Yes s Yes s Yes s No Yes s Yes s Yes s UM MX10UserMa anual,v0.1.1 July2016 Moun nting Ins struction ns 144 cm 50 cm Recommended d mounting heig ght and UI (left), Capture Volum me of UMX-10 (ri ight) The rec the bot height commende ttom of UM of the aver ed mountin MX-10. Th rage user. ng height fo e mountin or the UMX g height ca X-10 is 144 an be adju 4cm (57 inc sted to acc ches) from commodat floor to e the High a halogen and ma mbient lig n lamps or ay result in ht and / or r other stro increased r direct ligh ong illumina failure-to-

ht into the ation may capture rat UMX-10 sh reduce the tes or faile hould be a e performa d authenti voided. Su nce of the cation even unlight, UMX-10 nts. The UM not be If it is re suppor MX-10 was exposed to equired to rt@cmi-tec s designed o water, ice use this un h.com for for indoor e, extreme nit in outdo more infor r use only. temperatu oor or extr rmation. This unit is ures or othe eme enviro s not weath er adverse onments co herproof a weather co ontact loca nd must onditions. al sales or Note: I perman Installation nent damag n in extrem ge and voi e environm ments witho y. d warranty out proper r protection n may caus se diagram fo or wall mou unting inst tructions. See Sys stem, Rear UM MX10UserMa anual,v0.1.1 July2016 www.cmi Copyright itech.com t2016,allrigh htsreserved Syste m, Front t Syste m, Botto om www.cmi Copyright itech.com t2016,allrigh htsreserved Interphone UMMX10UserMa anual,v0.1.1 July2016 m, Rear Syste Syste m Rear C Connect tions Blo ock Terminati Resistor S ion Switch Factory Reset www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 User I Interface e for Iris Image C Capture tion yoursel he LCD displ ce detects y in 1.0 meter ates the ima uence. A rec guide box w en. If it is BL too far from ward. lf facing stra ay. When th your movem r parameter age capture tangular-sh will appear LUE, it mean m the device. aight he ment r, it haped on the ns you

. Move ve towards t r face to the user guide b EN, it mean ropriate pos your positi ce captures and/or iris. to size y. If he system t e LCD displa box flashes s you are at t an sition. Stop a and e on until the image of yo our u are stand device, your LCD display. e box flashe device cann ge because y ve back until en. ing too clos r face will no

. When the es RED, it m ot capture y you are too l the box tu se to ot fit in user means your o close. rns Posit at th devic with initia sequ user scree are t forw Mov your the u GREE appr hold devic face If yo the d the L guid the d imag Mov gree UMX your X-10 capture r face and ir es the imag is automatic e of cally. www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMa anual,v0.1.1 July2016 On-b oard De emonstra ation Ap pplicatio n The on image c enrollm

-board dem capture inc ment, and o monstratio cluding sub on-board m on applicati bject positi matching (a on shows t oning with authenticat the full cap h the face d tion). pabilities of display use f the UMX-

-10 for

, r interface, stem boots or that first iris image s up in this t finds the s capture se demo app subject fro equence fo plication. It m about 1 or capture i t is initated meter dist n recognit d by the vid tance, and ion / authe deo based then conti entication m motion nues the mode. The sys detecto natural To swit the syst interfac ch to enro tem is in im ce display, de, press la llment mod ure mode, mage captu stop Recog which will arge User i press Hom gnition mo con in cent ter of main me icon (

) on top lef

) ode and ret turn system n Launcher ft of active m to Launch page. If user her page. www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 lowing ma The fol in User scr een appea rs:

This use the bot er screen a ttom right, also allows one can ea simple dat asily delete tabase man e informati nagement. on of enro By tapping olled users. g the Delet te icon in To enro oll a new us ser, press t the Enroll i icon to brin ng up Enro oll User scr reen. Press th he plus(+) button in t the bottom m left to cap pture imag ge of the ne ew user. www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 An inst ruction scr reen will ap ppear for 3 to 5 secon nds, and th en switch t to the user r interface. uccessfully to Enroll U omplete en capturing User screen nrollment. After su returns OK co iris images n. Click on s, click on Name field OK to acc d to enter cept image name of su es. The syst ubject, then tem then n click on Name field N d Press th Authen he Home ic ntication m con (

ode.

) to return to t the Launch www.cmi Copyright itech.com t2016,allrigh htsreserved er page to re-start Re ecognition and UM MX10UserMa anual,v0.1.1 July2016 Summ mary of S Specifica ations Softwa are and Pla atform Tec chnical Sp pecification ns (Tentat ive) Embedd dedCPUandO OS FreescaleiM v1.8OS MX6CortexA9 9QuadCoreA ARMwithLinu xYocto Irisonb encodin boardalgorith ngandmatchin mfor ng Faceon Combin andmat boardalgorit edFaceandIr tching thmfor risencoding rvicesconfigu tion(withemb ration beddedweb Webser applicat server) Optional Optional Yes,RESTfu ltypeSDKwit thC#andC++

versionsforh hostside Other T Technical Specificat ions (Tent tative) Dimensi ions Weight Onboar rddatasize Irisimag geoutput Irisimag gepixelresolu ution 166x166x wallplate 43mm(6.5x 6.5x1.7inche es)withoutm ounting 630gwitho outwallplate Upto10,00

(authenticat Supportsdu 00iristemplat tion)or1:N(id ualfactorauth epairs,usable dentification) hentication eineither1:1 modes Meetsnew MTFofm pixelsac 2011standard ISO1979462

.0lp/mm@

minimumof4. ross1.0cmiri is d:

60%contrast t,and160 640x480p ixels,8bitdep pth.Supports smultipleform mats. Irisenco algorith odingandmat m tching DeltaID(ISO O197946com mpliant) onalirisimagi offrange)and ingdistance depthof Operatio

(stando field Irisposit tioningindica tors 35to45cm Enrollment mrange(10cm andRecogniti mdepthofcap ionmodes pturerange)in nboth playforXY CDdisplayfor rdistance rbardisplayfo or oxinLCDdisp box)withinL ltaneouscolor ing:

way Facepositio Facesizingt

(Z)positioni correctdista Blu Gre Re Supplement tolocallang oningwithinb tobracket(or ingwithsimul ancepositioni ue:toofaraw een:OK d:tooclose talvoicedista guagevia.wav ncefeedback vfilesubstitut standard.Co tion. onvertible www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 Other T Technical Specificat ions (Tent tative) (co ntinued) Autotilt t Yes,interna al:+25degto 20degtilt Irisinter rpupillarydis d covered stance Iristime eofcapture IRillumi inationforiris simaging 45to85mm m Typicallyab placedwith bout0.5secon inpropercapt dfromtimes turevolume subjectseyes are DualLED:w 750nmnom wavelengthsof minal(about5 f850nmnom 50%) inal(about50 0%);and imumuserpo ositioning Irismax speed Faceim agecapture Facerec cognitionimag ging 125mmper

(distancefro rsecond(4.9i omfrontofsy inchespersec ystem) c.)inZdirec ction Standard24 4bitcolor(for rreferenceim age) Optionalon nboardencod dingandmatch hing.Algorithm mtbd. Audio 24bit,1.8W Lineoutcon Wembeddeds nnectorforex speaker xternalspeake er Operati ngtemperatu rerange 0to45C Humidit ty 10to90%R RH,nonconde ensing Illumina atoreyesafety ystandard Network kinterface Otherst tandardports Standar dmounting Physical configur commu lAccessContr ration:other nicationsport ts rol(PACS) lAccessContr ration:intern rol alIDcard Physical configur reader Physical configur withtam lAccessContr ration:wallm mperswitch rol mounting Powers supply www.cmi Copyright itech.com t2016,allrigh htsreserved IEC62471 10/100Base eTEthernet(

RJ45connecto or) USBhostor rslave(forser rviceonly) 20UNC

(cameratripo od). Terminalan RS485,2XT service),1d ndwiredconn TTLinputs,US drycontactrel ectorsfor:Wi SBhost(intern lay egandin/out, nal),USBslave

,RS232, e(for Standard:I Optional:H SO/IEC14443 HIDmulticlass 3A/B(MiFare sreader(mod

)contactlessr eltobedeter reader rmined) Detachable switchstand wallmountp dardinPACSc lateforeasyi configuration nstallation.T Tamper Input110to Output12V o240VAC VDC,3.5A.Pro ovidedstandar rdwithsystem m. UM MX10UserMa anual,v0.1.1 July2016 Conta act Infor rmation CMITec

#904,25, Anyangs 431815R Tel:+82. Fax:+82. Contact:s y,Ltd. hCompany Simindaero, 248Beongil, o, i,Gyeonggido RepublicofKo orea 8 70.8633.8278

.31.624.4490 sales@cmitec ch.com Dongangu, CM 2033 San Tel:

ITechAmer 3GatewayPla Jose,CA9511

(1)4085736 rica,Inc. ace,Suite500 10USA 6930 www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 A Appendi CDCon 10LC rdDem nBoar ix 1 ntrolS moAp UMX an ndOn Screen pplicat ns tion M Main Launcher r Page Key) Check Atten Leave Work Supplement Go Out (F4 Return Butto Interphone Notice Icon ndance (F1 K k (F2 Key) t T&A (F3 Key y) Key) on (same as Call Button (

of Iris mode F5 Key)

(same as F6 K Key) g e is operating No No No No conn Clo Use modi Set otice Icon of F otice Icon of C otice Icon of I otice Icon of S ected ock display er Button for ification and ttings Button Face mode is CMID manag IP network is Serial Comm s operating ger is connect connected unication is ted

, search, r registration, deletion n for system c n configuration www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 e of Con ntents Table Setting 1 Devi gs ice 1.1 n 1 Configuration er Positioning Int 1.1.1 Use 1.1.2 Moti ion Wait Time terface 1.2 2 Bio 1.2.1 Sec 1.2.2 Iris urity Level 1.2.2.1 Max Dis stance 1.3 3 Sound 1.3.1 Spe eaker Volume C Volume 1.3.2 MIC e 4 Date & Time 1.4.1 Man nual Setup 1.4 1.5 5 Door ay ven By ation or Sensor or Sensor Type d Open Period(s k Time ock Time 1.5.1 Rela 1.5.2 Driv 1.5.3 Dura 1.5.4 Doo 1.5.5 Doo 1.5.6 Held 1.5.7 Lock 1.5.8 Unlo 6 Device Info 1.6 Interphone 7 1.7 1.7.1 IP A Address o 8 Memory Info 9 Camera 1.8 1.9 sec) 1.9.1 Pow wer Line Frequen ncy 1.1 10 Reset 1.10.1 1.10.2 Reboot Factory De 1.10.2.1 Reset 1.10.2.2 Delete 1.10.2.3 Delete Reset efault All Settings e All Data e All Data and t All Settings 2 Netw work 2.1 1 TCP/IP 2.1.1 LAN 2.1.2 IP A 2.1.3 Gate 2.1.4 Sub N Type Address eway bnet 2.2.1 Serv ver IP 2.2 2 Server 2.3 3 Serial 2.4 485-PC 2.3.1 RS4 485-NET 2.3.2 RS4 232 2.3.3 RS2 y 4 USB Memory 2.4.1 FW Upgrade ort 2.4.2 Impo ort 2.4.3 Exp www.cmi Copyright itech.com t2016,allrigh htsreserved 3 D Display struction 3.1 Voice Ins Timer 3.2 Central T meout 3.3 Menu Tim Saver 3.4 Screen S Timeout 3.5 Pop-Up T 3.6 Backligh t Timeout splay 3.7 Date Dis 3.8 Languag ge Authentication n 4.1 Auth. 4 A 4.2 T&A 4.3 T&A Mod de 5 M Mode 4.1.1 Combination M Mode (Step 1) on 5.1 Operatio 5.1.1 5.1.2 5.1.3 ation Dual Authentica Match Timeout Card Mode 6.1 Log Info L Log 6 User r 1 En nroll User al Individua 1.1 Name 1.2 1.3 Group 1.4 Iris & Fac ce Process Face Capture 1.4.1.1 Trac Iris Capture 1.4.2.1 Trac Save Data / Co Complete Enro cking Guide Box x UI cking Guide Box omplete Enrollm ollment x UI ent 1.4.1 1.4.2 1.4.3 1.4.4 1.5.1 1.6.1 1.6.2 1.5 Card 1.6 Pin Save Data Input Save Data 2 S Search Capacity Info Delete 3 C 4 D UM MX10UserMa anual,v0.1.1 July2016 Settin ngs Settings ic con in the ho ome screen

. Tap the Device Networ rk Display y Authen ntication Mode Log C C C C C onfiguration n for device e operating onfiguration n for IP & se erial commu unication onfiguration n for screen n display onfiguration n for authen ntication me ethod and T T&A onfiguration n for recogn nition opera ation In nformation o

(N Note: In con of saved log nstruction) g and log se earch viewer r www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1 De evice Configu ure settings for device o operation. 1.1 Co onfigurati on User Po ositioning I nterface Se elect a guid e display UI I when enro ollment and recognition n Motion n wait time Se et motion d detection de elay time fro om last reco gnition ope erating Motion n detect Se elect motio n detection enable/disa able for star rting recogn nition Debug Se elect Debug lin ne analysis) g mode ena ble/disable

(captures im mage stream m for off-

www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.1.1 C Configurat ion Use er Position ning Interfa ace ColorLR R-Ov Se elect Color overlay type e guide UI d display Box Se elect trackin ng box type guide UI di isplay 1.1.2 C Configurat ion Mo tion Wait Time www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 1.2 Bio o Security y Level Iris Face Se elect a com bination mo ode of Face and Iris A Additional co onfiguration n for Iris enr ollment and d recognitio on A Additional co in n constructio onfiguration on) n for Face en nrollment an nd recognit ion (note:

1.2.1 B Bio Secu urity Level

(Must hav ve face rec cognition www.cmi Copyright itech.com t2016,allrigh htsreserved option) UM MX10UserMa anual,v0.1.1 July2016 Face or Iris Face on nly Iris only y Face an nd Iris 1.2.2 B Bio Iris Se elect 2 stag an nd then aut m match) e Face or Iri tomatic swit is recognitio tch-over to I on mode (Fa Iris upon Fa ace recognit ace recognit tion first, tion non-

Se elect Face o only recogni tion mode Se elect Iris on ly recognitio on mode Se elect 2 stag an nd then aut in n constructio e Face and tomatic swit on) Iris recognit tch-over to I tion mode (

Iris upon m

(Face recogn ultiple matc nition first, ches) (note:

Max dis stance Se et max dista ance for Iris recognition n Recogn nition eithe r eye Se elect enable e/disable fo r either eye recognition n mode either eye Enroll e Se elect enable e/disable fo r either eye enrollment t mode www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.2.2.1 Bio Iris s Max D Distance www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 1.3 So und Speake r volume Se et speaker v volume for i instruction s sound and i interphone v voice MIC vo lume Se et micropho one volume for interph one voice (n note: in con struction) 1.3.1 S ound S peaker Vo olume 1.3.2 S ound M MIC Volum me al to settings s for speake er volume Identica www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.4 Da ate & Tim e Time sy ync Se elect enable e/disable fo r time sync with CMID manager Manual l setup Se et date and time manu ally 1.4.1 D Date & Tim me Manu ual Setup www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.5 Do oor Relay Driven by Duratio on (sec) RTE (Re equest to Ex xit) RTE Typ pe Door se ensor Se elect a door r open relay y Se elect an eve ent mode fo or door open n relay Se et time dura ation for do oor open rela ay operatio n Se elect a door r exit button n (Note: in c construction n) Se elect a door r exit button n operating type (Note:

: in construc ction) Se elect a door r sensor (No ote: in const truction) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 Door se ensor type Held op pen period

(sec) Lock tim me Unlock time Tamper r 1.5.1 D Door Re lay Se elect door s sensor opera ating type (

note: in con nstruction) Se et time dura ation for do oor open op eration (not te: in constr ruction) Se et door lock k time (note e: in constru ction) Se et door unlo ock time (no ote: in const truction) Se elect enable e/disable fo r tamper (of ff the wall d detection) o peration Not use e Se elect not us se Interna l Relay Se elect interna al relay www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.5.2 D Door Dri iven by All Even nts Select doo or open for all events Authen ntication Select doo or open for authenticat ion event T&A Ev vent Select doo or open for T&A event Authen ntication + T T&A Event Select doo or open for authenticat ion plus T&

&A event ed Disable Select doo or open disa able 1.5.3 D Door Du uration (se ec) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.5.4 D Door Do oor Sensor r 1.5.5 D Door Do oor Sensor r Type N/O N/C Se elect door e exit button s sensor as No ormal Open n type Se elect door e exit button s sensor as No ormal Close e type UM MX10UserMa anual,v0.1.1 July2016 www.cmi Copyright itech.com t2016,allrigh htsreserved 1.5.6 D Door He eld Open P c) Period (sec 1.5.7 D Door Loc ck Time Never Always Se elect door lo ock time --

never Se elect door lo ock time --

always www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 1.5.8 D Door Un e nlock Time Never Always Se elect door u unlock time

-- never Se elect door u unlock time

-- always www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 1.6 De evice Info Model FW Ver rsion Device ID Kernel v version HW ver rsion MAC M Model name of this devi ice V ersion name e of release d firmware

(F/W) file Id dentification n number of f this device e R R evision num mber of kern nel evision num mber of hard dware board d M MAC address s of this dev vice www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 Boot ve ersion Root ve ersion Recove ry version Applica ation versio on ersion FPGA v www.cmi Copyright itech.com t2016,allrigh htsreserved R evision num mber of boo t loader R R R R evision num mber of root t file system m evision num mber of reco overy firmwa are evision num mber of Laun ncher applic cation evision num mber of Cam mera FPGA fi irmware UM MX10UserMaanual,v0.1.1 July2016 1.7 Int terphone Interph hone IP Addr ress Se elect enable e/disable fo r interphone e use (note:

: in construc ction) IP P address of f PC which i onstruction)

) co nterphone p program is i installed (no ote: in 1.7.1 In nterphone IP Addre ess www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.8 Me emory Inf fo System User da ata M Memory capa acity of syst tem area (no ote: in const truction) M Memory capa acity of use r area (note e: in constru ction) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.9 Ca mera Power l line freque ncy Se elect power r line freque ency that su pplying to d device 1.9.1 C Camera 50Hz 60Hz Power Lin ne Frequen ncy Se elect power r line freque ency to 50Hz z Se elect power r line freque ency to 60Hz z www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.10 R Reset Reboot t R eboot devic ce eset all conf figuration settings and/

/or delete a all user data Factory y Default R 1.10.1 Reset R Reboot www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.10.2 Reset F Factory De efault Reset a ll settings R eset all conf figuration s ettings Delete a all data D Delete all use er data Delete a all data and d reset all c configurati al ll user data on settings s Reset all c configuratio on settings a and delete 1.10.2. 1 Reset Factory D Default Reset All S Settings www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.10.2. 1.10.2. 2 Reset Factory D Default Delete All l Data 3 Reset Factory D Default Delete All l Data and d Reset All Settings www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 2 Net twork Configu ure setting 2.1 TC CP/IP LAN typ pe DHCP IP Addr ress Gatewa ay Subnet s for IP and d serial com mmunicatio on. Se elect a type of LAN Se elect enable e/disable DH HCP mode Se et static IP a address Se et static gat teway IP add dress Se et static sub bnet mask www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 2.1.1 TC CP/IP LA AN Type Disable e Etherne et D Disable LAN use Se elect Ethern net for LAN use 2.1.2 TC CP/IP IP Address www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 2.1.3 T TCP/IP G Gateway 2.1.4 T TCP/IP S Subnet www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 2.2 Ser rver

(Current tly settled se erver is CMI ID PC for tim me sync) Use Ser rver Server I IP Port 2.2.1 Se erver Ser rver IP Se elect enable e/disable fo r server use e (Note: In co onstruction)

) Se et IP addres ss of server

(Note: In co onstruction)

(N Note: To be eliminated)

) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 2.3 Ser rial RS485-

PC RS485-

NET RS232 2.3.1 S erial RS S485-PC www.cmi Copyright itech.com t2016,allrigh htsreserved Se elect a baud d rate for RS S485 (note:

in construct tion) Se elect an ope erating mod de for RS485 5 (note: in c construction n) Se elect a baud d rate for RS S232 (note:

in construct tion) UM MX10UserMa anual,v0.1.1 July2016 2.3.2 S erial RS S485-NET D Disable RS48 85 Se et RS485 op perating mo ode as host Se et RS485 op perating mo ode as slave Not use e NET-HO OST NET-SL AVE 2.3.3 S erial RS S232 www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 2.4 US SB Memor ry USB ena able FW Upg grade Import Export Se elect enable e/disable fo r USB memo ory use G o into firmw ware (F/W) u upgrade fro om USB mem mory G o into back kup data (us er & log da ta) restore f from USB m memory G o into back kup data (us ser & log da ata) save to USB memo ory 2.4.1 U USB Memo ory FW U Upgrade www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 Upgrade e F/W by ta pping on OK button o on the botto om right. firmware an nd operating g library) do oes not exist t in USB, me essage appe ears as W file (new f above. If the FW shown a 2.4.2 U USB Memo ory Impo ort User da ata Log da ata R estore user enroll data from USB m memory R estore log d data from U SB memory y www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 2.4.3 U USB Memo ory Expo ort User da ata ta Log dat Ba ackup user enroll data to USB mem mory Ba ackup log d data to USB memory www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 3 Disp play Configu ure settings for screen d display. 3.1 Vo oice Instru uctions Voice In nstruction www.cmi Copyright itech.com t2016,allrigh htsreserved Se elect enablee/disable for voice guid de positionin ng / instruct tions UM MX10UserMa anual,v0.1.1 July2016 3.2 Ce ntral Tim mer Central Timer Se elect enable ap pplication e/disable fo r clock disp 3.3 Me enu Timeo out lay on the c center of Lau uncher Timeout Menu T Se et timeout f for auto exit t from menu u display aft ter leaving u untouched www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 3.4 Scr reensaver r Logo Time 3.5 Po op-Up Tim meout Pop-Up p Timeout Se elect logo d display as sc creensaver Se elect clock d display as sc creensaver Se et pop-up m d uration message win ndow (recog gnition com mplete etc.) d display www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 3.6 Ba cklight Ti imeout Pop-Up p Timeout t Set time eout for au uto off of L CD backlig ght after lea aving unus sed 3.7 Da ate Displa y YYYY/M MM/DD M/YYYY DD/MM Se elect year/m month/day d display mod de Se elect day/m month/year d display mod de www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 3.8 Lan nguage ge Langua Se elect a language to usee (Note: In c construction n) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 4 Auth henticati ion Configu ure settings for authent 4.1 Au uth. Start m mode Combin nation mod de ication met hod and T&

&A. Se elect a basic c (first) reco ognition met thod Se elect a com bination (ad dditional) re ecognition m method if ne ecessary www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 4.1.1 A Auth. Co ombination n Mode (S Step 1) combinatio on (addition nal) recognit tion method d. Select a 4.2 T&

&A Use T&

&A Se elect enable e/disable fo r T&A usag e mode (no ote: in const ruction) T&A >R Recognition n Se elect T&A m mode (Atten ndance etc.) first, then r recognition nition > T&

&A A After recogni ition, then i nput T&A m mode (Atten ndance etc.) Recogn www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 4.3 T&

&A Mode n constructi ion)

(Note: In www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 5 Mo ode Configu ure settings for recognit tion operati ion. 5.1 Op peration Face de etection e/disable fo Se elect enable e eliminated d) b Individu ual auth. Se elect enable e/disable fo r face image e saving at recognition

(note: to r permission n of individu ual authenti ication Dual au uthenticatio on Se elect a dual in n constructio authenticat on) tion (simulta aneous 2 pe ersons) met hod (note:

Match t timeout Se et a recogn ition trying timeout Card m ode www.cmi Copyright itech.com t2016,allrigh htsreserved Se elect use or r not for CSN N in RFID ca ard (note: in constructio on) UM MX10UserMa anual,v0.1.1 July2016 5.1.1 O Operation Dual Au uthenticat tion 5.1.2 O Operation Match Timeout www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 5.1.3 O Operation Card M ode www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 6 Log View inf formation o of saved log 6.1 Log g Info

(Note: In n constructi ion) www.cmi Copyright itech.com t2016,allrigh htsreserved and log seaarch viewer. UM MX10UserMaanual,v0.1.1 July2016 User Tap the User icon i n Home scr reen. Display ys the regist tered user lists in All a and Group 1, 2, 3, 4 Enroll b button Sw witch to enr roll process Search button Sw witch to sea arch process s Capacit ty Info butt ton Sh how the use ed memory percentage e Delete b button Sw witch to del lete process s www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 1 Enro oll User Tap the Enroll butt ton to enrol l a new use r. Enroll Use er Page ID D: Created a user ID num mber autom matically or i nput manua ally Na ame: Input user name m manually In dividual: Se et user indiv idual authe ntication mo ode if neces ssary Ad dmin: Can m make a user administrat tor or not Gr roup: Can m make a user belong to a a group By ypass Card:

Can registe er a user who o holding b ypass card

(highest pri ority card) www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.1 Nam me 1.2 Ind dividual Select a an individua al authentica ation mode. www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 1.3 Gro oup 1.4 Iris s & Face P rocess Iris & F Face tab Face Se election cha anges tab to o blue color B io select che eck boxes a re shown Se elect box fo or face imag e capture Glasses wearer Se elect box fo or face takin g off glasse es additiona lly if necess ary www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 Both ey ye Either e eye

) button Start(+) 1.4.1 Ir ris & Face Se elect box fo or both eye Iris mode Se elect box fo or either ey e Iris mode e Sw witch to enr roll process Process Face Ca apture Note

: Only oper rational if Combined d Face and I Iris mode is active Color O Overlay B LUE means G REEN mean R ED means t too far ns OK oo close. Up/Dow wn Arrow C an tilt came era manually y if necessar ry (note: to be eliminat ed) to Iris Capt ture stage a after good face image e acquisitio on Switch UM MX10UserMa anual,v0.1.1 July2016 www.cmi Copyright itech.com t2016,allrigh htsreserved 1.4.1.1 Iris & Fac ce Process s Face C Capture Tracking g Guide Bo ox UI Position ning box app pears in ord der to guide e subject. e normal fac ce images. Capture www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 In case o of selection of Glasses wearer chec ck box, will be active fo or about 3 to o 5 seconds s. e additional face images s taken off g glasses. Capture www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.4.2 Ir ris & Face Process Iris Cap pture of Tracking g Guide Box In case UI mode, d display will b be active for r about 3 to 5 seconds. 1.4.2.1 Iris & Fac ce Process s Iris Ca apture T Tracking G Guide Box x UI Capture e iris images s. www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 1.4.3 Ir ris & Face Reset Cancel OK 1.4.4 Ir ris & Face Process Save Da ata / Comp plete Enro ollment R eturn to fac ce capture s tage R eturn to Enr roll User scr reen M Move to next t screen to c complete en nrollment Process Comple ete Enrollm ment Cancel R eturn to Use er Main scre een www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMaanual,v0.1.1 July2016 OK 1.5 Car rd Card ta b ave user dat Sa U ser Main sc ta to compl creen ete biometr rics Enrollm ent, then re eturn to Se election cha anges tab to o blue color se tag your c card" messa age appears s, touch fron nt-bottom p part of devic ce with user r card. If "Pleas 1.5.1 C Card Sav ve Data www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 Card nu umber is sho own on tagg ging a card C lear card nu umber and "

"Please tag your card" m message is shown R eturn to Use er Main scre een Sa ave user dat ta and retur rn to User M Main screen Reset Cancel OK 1.6 Pin n PIN tab b

+) button Start (+

Se election cha anges tab to o blue color Sw witch to inp put screen UM MX10UserMa anual,v0.1.1 July2016 www.cmi Copyright itech.com t2016,allrigh htsreserved 1.6.1 P Pin Inpu t 1.6.2 P Pin Save e Data Pin num mber is show wn as "*" cha aracter. Reset Cancel OK C lear pin num mber and (+

+) button is shown R eturn to Use er Main scre een Sa ave user dat sc creen ta to compl ete PIN enr rollment / re eturn to Use er Main www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 2 Sear rch Tap the Search ico n to browse e list of enroolled users.

(Note: In n constructi ion) www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 3 Cap acity Info o Tap the Capacity In nfo icon to check storaage space.

(Note: In n constructi ion) www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 4 Dele ete Delete i nformation of enrolled user. Select A All Deselec ct All Cancel Delete Se elect all use ers D Deselect all u users R eturn to Use er Main scre een D Delete select ted user(s) www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 Recog gnition P rocess 1.1 Rec cognition Process ition proces ss is identica al to the enr rollment pro ocess. Recogn 1.2 Rec cognition /

/ Authent 1.3 Rec cognition /

/ Authent www.cmi Copyright itech.com t2016,allrigh htsreserved ication Su uccess ication Fa ilure UM MX10UserMaanual,v0.1.1 July2016 When a ccess is den nied, warnin g icons can appear on the screen. Glasses: De evice detect ts occlusion by glasses. Color Lens s: Device det tects colore d lenses. Small Eye:

Device cann not fully det tect iris due e to eyelid. www.cmi Copyright itech.com t2016,allrigh htsreserved UMMX10UserMaanual,v0.1.1 July2016 FCC REQ QUIREMENT TS PART 15 Caution

: Any chang ges or modif fications in constructio n of this de vice which a are not exp ressly approve ed by the re esponsible fo or complian nce could vo oid the user

's authority to operate the equipm ent. NOTE: T This device c complies wi th Part 15 o of the FCC R Rules. Operatio on is subjec ct to the foll owing two conditions;

1. This d device may not cause h harmful inter rface, and 2. This d device must accept any y interferenc ce received, including in nterference that may cau use undesire ed operatio n. This equ uipment has s been teste ed and foun d to comply y with the li mits for a C Class B Digital D Device, pursuan nt to Part 15 5 of the FCC C Rules. Thes se limits are e designed t to this equip pment generat es, uses, an nd can radia te radio freq quency ene accorda ance with rgy and, if n not installed d and used i in the instr ructions, ma ay cause ha rmful interfe erence to ra adio commu unications. Howeve er, there is n no guarante e that interf ference will not occur in n a particula ar installat tion. If this equ uipment doe es cause har rmful interfe erence to ra adio or telev vision recept tion, which ca an be www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016 determi ned by turn ning the rad io or televis sion off and to try to o on, the use er is encoura aged correct interference e by one or more of the e following measures. 1. Reorie ent or reloc cate the rece eiving anten nna. 2. Increa ase the sepa aration betw ween the eq quipment an nd receiver. 3. Conn ect the equ ipment into o an outlet o on another c circuit. 4. Consu ult the deale er or an exp perienced ra adio/TV tech hnician for h help. www.cmi Copyright itech.com t2016,allrigh htsreserved UM MX10UserMa anual,v0.1.1 July2016

Next Generation Iris Recognition System

(Derivative Model : EF-45, UMX-10, UMX-20, UMX-G) EF-45N User Manual

(v0.1.1, July 1, 2016) Intuitive face display positioning Internal automatic motorized tilt cameras LAN / RS485 Optional face image capture and face recognition User graphics and screen shots in this guide may vary from actual Some of the contents in this manual may differ from current operating library release www.cmi-tech.com Copyright 2016, all rights reserved v0.1.1 July 2016 Introduction to the EF-45N Iris Recognition System This new iris recognition system offers highly intuitive, hands-free iris biometrics imaging in a compact and elegantly designed identification and authentication terminal for use in a wide range of identity management applications. The front facing nominal 5.0 inch LCD serves to display the users face image for fast, easy and highly natural positioning for proper iris image capture. The subject merely puts his or her face in the center of the LCD, and then moves toward the system to size his or her head to the brackets in the display to be in proper range. Image capture is fast and automatic. While user instructions are very simple, almost all subjects will be able to interact with the system without any directions. EF-45N Next Generation Iris Recognition System And the internal automatic tilt mechanism adjusts to the users height or vertical position over a range of 50 cm (about 20 inches), making the EF-45N ideal for countertop, desktop, wall mount or kiosk installations. The EF-45N is an embedded terminal, which means that all image processing and machine control is performed on the internal Linux-on-ARM mainboard. Typical connectivity to host systems is through TCP/IP (Ethernet). And iris biometric encoding and matching is typically performed on-board as well, so identification or authentication decisions are made locally for fast responsiveness. For access control, there are Wiegand connections for dedicated, local communications to door controllers or panels. Other typical options include WiFi and a smart card reader. For all specifications, please see Specification section. For complete depiction of all EF-45N on-board screens, see EF-45N LCD Control Screens and On-Board Demo Application manual. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Key Features Iris user interface with intuitive LCD display face positioning, like smart phone selfie Contactless iris imaging at range of 35 to 45 cm stand-off Internal, automatic face and iris camera tilt mechanism with nominal height range of 50 cm Positioning guidance vocalizations selectable on / off and delay time. English standard, all other languages available with .wav file substitution Simultaneous dual iris recognition with typical capture speed of under 1 second On-board iris encoding and matching, with internal data base of up to 10,000 users in either 1:1 (authentication) or 1:N (identification) modes Optional Combined Face and Iris modes:

Face as primary modality, with face recognition rejects decisions automatically switch over to iris recognition Supplemental face recognition in case of iris recognition failure-to-capture (FTC), so that face recognition follows iris recognition attempt Supports dual factor authentication with card or PIN Optimized imaging for difficult ambient lighting conditions Optimized image capture for most sunglasses, glasses, and facial veils Supports imaging of all iris colors Kensington lock slot standard Standard communications connectors and protocols for TCP/IP (Ethernet RJ-45), RS-484 and -

232, dual Wiegand I/O, TTL, and dry contact relay Connection cables with press-in connectors included in accessories kit External audio connector Tamper switch on rear panel Access control (AC) configuration includes wall mount plate Optional WiFi support (choice of compact or antenna type modules) Integrated Smart Card reader (choice of basic MiFare / DesFire card or HID multi-class reader) Meets CE mark, FCC, IEC 62471 eye safety, and RoHS standards. Iris recognition meets ISO 19794-6 2011 standard Design and production meet ISO 9001 2015 standard www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Cautions Consult the dealer or an experienced radio/TV technician for help FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from which the receiver is connected FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ID Management Version Access Control and Time

& Attendance Versions Accessories Kit Includes:

Power supply (IEC C13 female) Power cord (IEC C14 male), power side connector type by country Basic MiFare / DesFire card reader

(internal) Standard back cover Wall mount bracket ID I/O cables with push in connectors for device, and pig tails for external connections Includes cables for RS 485, RS 232, TTL (2), dry contact relay AC I/O cables with push in connectors for device, and pig tails for external connections Includes cables for Wiegand (2), RS 485, RS 232, TTL (2), dry contact relay diode Yes Yes No Yes No Yes No Yes Yes Yes Yes No Yes No Yes Yes www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Mounting Instructions 144 cm 50 cm Recommended mounting height and UI (left), Capture Volume of EF-45N (right) The recommended mounting height for the EF-45N is 144cm (57 inches) from floor to the bottom of EF-45N. The mounting height can be adjusted to accommodate the height of the average user. High ambient light and / or direct light into the EF-45N should be avoided. Sunlight, halogen lamps or other strong illumination may reduce the performance of the EF-45N and may result in increased failure-to-capture rates or failed authentication events. The EF-45N was designed for indoor use only. This unit is not weatherproof and must not be exposed to water, ice, extreme temperatures or other adverse weather conditions. If it is required to use this unit in outdoor or extreme environments contact local sales or support@cmi-tech.com for more information. Note: Installation in extreme environments without proper protection may cause permanent damage and void warranty. See System, Rear diagram for wall mounting instructions. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 System, Front System, Bottom www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 System, Rear System Rear Connections Block www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 User Interface for Iris Image Capture l Position yourself facing straight at the LCD display. When the device detects your movement within 1.0 meter parameter, it initiates the image capture sequence. A rectangular-shaped user guide box will appear on the screen. If it is BLUE, it means you are too far from the device. Move forward. l Move towards the system to size your face to the LCD display. If the user guide box flashes GREEN, it means you are at an appropriate position. Stop and hold your position until the device captures image of your face and/or iris. l If you are standing too close to the device, your face will not fit in the LCD display. When the user guide box flashes RED, it means the device cannot capture your image because you are too close. Move back until the box turns green. l EF-45N captures the image of your face and iris automatically. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 On-board Demonstration Application The on-board demonstration application shows the full capabilities of the EF-45N for image capture including subject positioning with the face display user interface, enrollment, and on-board matching (authentication). The system boots up in this demo application. It is initated by the video based motion detector that first finds the subject from about 1 meter distance, and then continues the natural iris image capture sequence for capture in recognition / authentication mode. To switch to enrollment mode, press large User icon in center of main Launcher page. If the system is in image capture mode, press Home icon (

interface display, which will stop Recognition mode and return system to Launcher page.

) on top left of active user www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 The following main User screen appears:

This user screen also allows simple database management. By tapping the Delete icon in the bottom right, one can easily delete information of enrolled users. To enroll a new user, press the Enroll icon to bring up Enroll User screen. Press the plus(+) button in the bottom left to capture image of the new user. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 An instruction screen will appear for 3 to 5 seconds, and then switch to the user interface. After successfully capturing iris images, click on OK to accept images. The system then returns to Enroll User screen. Click on Name field to enter name of subject, then click on OK complete enrollment. Name field Press the Home icon (

) to return to the Launcher page to re-start Recognition and Authentication mode. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Summary of Specifications Software and Platform Technical Specifications (Tentative) Embedded CPU and OS Freescale iMX6 Cortex A9 Quad Core ARM with Linux Yocto v1.8 OS Optional Optional Iris on-board algorithm for encoding and matching Face on-board algorithm for Combined Face and Iris encoding and matching Web services configuration application (with embedded web server) Yes, RESTful type SDK with C# and C++ versions for host side Other Technical Specifications (Tentative) Dimensions 166 x 166 x 43 mm(6.5 x 6.5 x 1.7 inches) without mounting wall plate Weight 630 g without wall plate On-board data size Up to 10,000 iris template pairs, usable in either 1:1

(authentication) or 1:N (identification) modes Supports dual factor authentication Iris image output Meets new ISO 19794-6 2011 standard:

MTF of minimum of 2 lp/mm @ 60% contrast, and 160 pixels across 1.0 cm iris Iris image pixel resolution 640 x 480 pixels, 8 bit depth. Supports multiple formats. Iris encoding and matching algorithm Operational iris imaging distance

(stand-off range) and depth of field Delta ID (ISO 19794-6 compliant) 35 to 45 cm range (10 cm depth of capture range) in both Enrollment and Recognition modes Iris positioning indicators Face positioning within box in LCD display for X Y Face sizing to bracket (or box) within LCD display for distance

(Z) positioning with simultaneous color bar display for correct distance positioning:

Blue: too far away Green: OK Red: too close Supplemental voice distance feedback standard. Convertible to local language via .wav file substitution. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Other Technical Specifications (Tentative) (continued) Auto tilt Yes, internal: +25 deg to -20 deg tilt Iris inter-pupillary distance covered Iris time of capture 45 to 85 mm Typically about 0.5 second from time subjects eyes are placed within proper capture volume IR illumination for iris imaging Dual LED: wavelengths of 850 nm nominal (about 50%); and 750 nm nominal (about 50%) Iris maximum user positioning speed 125 mm per second (4.9 inches per sec.) in Z direction

(distance from front of system) Face image capture Standard 24 bit color (for reference image) Face recognition imaging Optional on-board encoding and matching. Algorithm tbd. Audio 24 bit, 1.8 W embedded speaker Line out connector for external speaker Operating temperature range 0 to 45C Humidity 10 to 90% RH, non-condensing Illuminator eye safety standard IEC 62471 Network interface 10/100 Base-T Ethernet (RJ45 connector) Other standard ports USB host or slave (for service only) Standard mounting

- 20 UNC (camera tripod). Physical Access Control (PACS) configuration: other communications ports Terminal and wired connectors for: Wiegand in/out, RS-232, RS-485, 2X TTL inputs, USB host (internal), USB slave (for service), 1 dry contact relay Physical Access Control configuration: internal ID card reader Physical Access Control configuration: wall mounting with tamper switch Power supply Standard: ISO /IEC 14443 A/B (MiFare) contactless reader Optional: HID multi-class reader (model to be determined) Detachable wall mount plate for easy installation. Tamper switch standard in PACS configuration Input 110 to 240V AC Output 15V DC, 3.5A. Provided standard with system. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Contact Information CMITech Company, Ltd. 5th Floor, 38, Burim-ro, 170beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do,14055, Republic of Korea Tel : +82.70.8633.8278 Fax: +82.31.624.4490 Contact: sales@cmi-tech.com CMITech America, Inc. 2033 Gateway Place, Suite 500 San Jose, CA 95110 USA Tel: (1) 408 573-6930 www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Appendix 1 EF-45N LCD Control Screens and On-Board Demo Application Main Launcher Page Check Attendance (F1 Key) Notice Icon of Face mode is operating Leave Work (F2 Key) Notice Icon of CMID manager is connected Supplement T&A (F3 Key) Notice Icon of IP network is connected Go Out (F4 Key) Return Button (same as F5 Key) Notice Icon of Serial Communication is connected Interphone Call Button (same as F6 Key) Clock display Notice Icon of Iris mode is operating User Button for registration, search, modification and deletion Settings Button for system configuration www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Table of Contents Settings 1 Device 1.1 Configuration 1.2 Bio 1.1.1 User Positioning Interface 1.1.2 Motion Wait Time 1.2.1 Security Level 1.2.2 Iris 1.2.2.1 Max Distance 1.3 Sound 1.3.1 Speaker Volume 1.3.2 MIC Volume 1.4 Date & Time 1.4.1 Manual Setup 1.5 Door 1.5.1 Relay 1.5.2 Driven By 1.5.3 Duration 1.5.4 Door Sensor 1.5.5 Door Sensor Type 1.5.6 Held Open Period(sec) 1.5.7 Lock Time 1.5.8 Unlock Time 1.6 Device Info 1.7 Interphone 1.8 Memory Info 1.9 Camera 1.7.1 IP Address 1.9.1 Power Line Frequency 1.10 Reset 1.10.1 1.10.2 Reboot Factory Default 2 Network 2.1 TCP/IP 2.1.1 LAN Type 2.1.2 IP Address 2.1.3 Gateway 2.1.4 Subnet 2.2 Server 2.3 Serial 2.2.1 Server IP 2.4 USB Memory 2.3.1 RS485-PC 2.3.2 RS485-NET 2.3.3 RS232 2.4.1 FW Upgrade 2.4.2 Import 2.4.3 Export 3 Display 3.1 Voice Instruction 3.2 Central Timer 3.3 Menu Timeout 3.4 Screen Saver 3.5 Pop-Up Timeout 3.6 Backlight Timeout 3.7 Date Display 3.8 Language 4 Authentication 4.1 Auth. 4.2 T&A 4.3 T&A Mode 5 Mode 5.1 Operation 6 Log 6.1 Log Info User 1 Enroll User 4.1.1 Combination Mode (Step 1) 5.1.1 Dual Authentication 5.1.2 Match Timeout 5.1.3 Card Mode 1.4.1 Face Capture 1.4.1.1 Tracking Guide Box UI 1.4.2 Iris Capture 1.4.2.1 Tracking Guide Box UI 1.4.3 Save Data / Complete Enrollment 1.4.4 Complete Enrollment 1.5 Card 1.6 Pin 1.5.1 Save Data 1.6.1 Input 1.6.2 Save Data 2 Search 3 Capacity Info 4 Delete 1.10.2.1 Reset All Settings 1.10.2.2 Delete All Data 1.10.2.3 Delete All Data and Reset All Settings 1.1 Name 1.2 Individual 1.3 Group 1.4 Iris & Face Process www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Settings Tap the Settings icon in the home screen. Device Network Display Mode Log Configuration for device operating Configuration for IP & serial communication Configuration for screen display Configuration for recognition operation Information of saved log and log search viewer

(Note: In construction) Authentication Configuration for authentication method and T&A www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1 Device Configure settings for device operation. 1.1 Configuration User Positioning Interface Select a guide display UI when enrollment and recognition Motion wait time Set motion detection delay time from last recognition operating Motion detect Select motion detection enable/disable for starting recognition Debug Select Debug mode enable/disable (captures image stream for off-

line analysis) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.1.1 Configuration User Positioning Interface ColorLR-Ov Select Color overlay type guide UI display Box Select tracking box type guide UI display 1.1.2 Configuration Motion Wait Time www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.2 Bio Security Level Select a combination mode of Face and Iris Iris Face Additional configuration for Iris enrollment and recognition Additional configuration for Face enrollment and recognition (note:

in construction) 1.2.1 Bio Security Level (Must have face recognition option) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Select 2 stage Face or Iris recognition mode (Face recognition first, and then automatic switch-over to Iris upon Face recognition non-

match) Select Face only recognition mode Select Iris only recognition mode Select 2 stage Face and Iris recognition mode (Face recognition first, and then automatic switch-over to Iris upon multiple matches) (note:

in construction) Face or Iris Face only Iris only Face and Iris 1.2.2 Bio Iris Max distance Set max distance for Iris recognition Recognition either eye Select enable/disable for either eye recognition mode Enroll either eye Select enable/disable for either eye enrollment mode www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.2.2.1 Bio Iris Max Distance www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.3 Sound Speaker volume Set speaker volume for instruction sound and interphone voice MIC volume Set microphone volume for interphone voice (note: in construction) 1.3.1 Sound Speaker Volume 1.3.2 Sound MIC Volume Identical to settings for speaker volume www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.4 Date & Time Time sync Select enable/disable for time sync with CMID manager Manual setup Set date and time manually 1.4.1 Date & Time Manual Setup www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.5 Door Relay Select a door open relay Driven by Select an event mode for door open relay Duration (sec) Set time duration for door open relay operation RTE (Request to Exit) Select a door exit button (Note: in construction) RTE Type Select a door exit button operating type (Note: in construction) Door sensor Select a door sensor (Note: in construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Door sensor type Select door sensor operating type (note: in construction) Held open period (sec) Set time duration for door open operation (note: in construction) Lock time Set door lock time (note: in construction) Unlock time Set door unlock time (note: in construction) Tamper Select enable/disable for tamper (off the wall detection) operation 1.5.1 Door Relay Not use Select not use Internal Relay Select internal relay www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.5.2 Door Driven by All Events Select door open for all events Authentication Select door open for authentication event T&A Event Select door open for T&A event Authentication + T&A Event Select door open for authentication plus T&A event Disabled Select door open disable 1.5.3 Door Duration (sec) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.5.4 Door Door Sensor 1.5.5 Door Door Sensor Type N/O N/C Select door exit button sensor as Normal Open type Select door exit button sensor as Normal Close type www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.5.6 Door Held Open Period (sec) 1.5.7 Door Lock Time Never Always Select door lock time -- never Select door lock time -- always www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.5.8 Door Unlock Time Never Always Select door unlock time -- never Select door unlock time -- always www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.6 Device Info Model Model name of this device FW Version Version name of released firmware (F/W) file Device ID Identification number of this device Kernel version Revision number of kernel HW version Revision number of hardware board MAC MAC address of this device www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Boot version Revision number of boot loader Root version Revision number of root file system Recovery version Revision number of recovery firmware Application version Revision number of Launcher application FPGA version Revision number of Camera FPGA firmware www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.7 Interphone Interphone Select enable/disable for interphone use (note: in construction) IP Address IP address of PC which interphone program is installed (note: in construction) 1.7.1 Interphone IP Address www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.8 Memory Info System User data Memory capacity of system area (note: in construction) Memory capacity of user area (note: in construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.9 Camera Power line frequency Select power line frequency that supplying to device 1.9.1 Camera Power Line Frequency 50Hz 60Hz Select power line frequency to 50Hz Select power line frequency to 60Hz www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.10 Reset Reboot Reboot device Factory Default Reset all configuration settings and/or delete all user data 1.10.1 Reset Reboot www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.10.2 Reset Factory Default Reset all settings Reset all configuration settings Delete all data Delete all user data Delete all data and reset all configuration settings Reset all configuration settings and delete all user data 1.10.2.1 Reset Factory Default Reset All Settings www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.10.2.2 Reset Factory Default Delete All Data 1.10.2.3 Reset Factory Default Delete All Data and Reset All Settings www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2 Network 2.1 TCP/IP Configure settings for IP and serial communication. LAN type DHCP Gateway Subnet Select a type of LAN Select enable/disable DHCP mode Set static gateway IP address Set static subnet mask IP Address Set static IP address www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.1.1 TCP/IP LAN Type Disable Ethernet Disable LAN use Select Ethernet for LAN use 2.1.2 TCP/IP IP Address www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.1.3 TCP/IP Gateway 2.1.4 TCP/IP Subnet www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.2 Server

(Currently settled server is CMID PC for time sync) Use Server Select enable/disable for server use (Note: In construction) Server IP Port Set IP address of server (Note: In construction)

(Note: To be eliminated) 2.2.1 Server Server IP www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.3 Serial RS485-PC Select a baud rate for RS485 (note: in construction) RS485-NET Select an operating mode for RS485 (note: in construction) RS232 Select a baud rate for RS232 (note: in construction) 2.3.1 Serial RS485-PC www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.3.2 Serial RS485-NET Not use Disable RS485 NET-HOST Set RS485 operating mode as host NET-SLAVE Set RS485 operating mode as slave 2.3.3 Serial RS232 www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.4 USB Memory USB enable Select enable/disable for USB memory use FW Upgrade Go into firmware (F/W) upgrade from USB memory Import Export Go into backup data (user & log data) restore from USB memory Go into backup data (user & log data) save to USB memory 2.4.1 USB Memory FW Upgrade www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Upgrade F/W by tapping on OK button on the bottom right. If the FW file (new firmware and operating library) does not exist in USB, message appears as shown above. 2.4.2 USB Memory Import User data Log data Restore user enroll data from USB memory Restore log data from USB memory www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2.4.3 USB Memory Export User data Log data Backup user enroll data to USB memory Backup log data to USB memory www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3 Display Configure settings for screen display. 3.1 Voice Instructions Voice Instruction Select enable/disable for voice guide positioning / instructions www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3.2 Central Timer Central Timer Select enable/disable for clock display on the center of Launcher application 3.3 Menu Timeout Menu Timeout Set timeout for auto exit from menu display after leaving untouched www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3.4 Screensaver Logo Time Select logo display as screensaver Select clock display as screensaver 3.5 Pop-Up Timeout Pop-Up Timeout Set pop-up message window (recognition complete etc.) display duration www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3.6 Backlight Timeout Pop-Up Timeout Set timeout for auto off of LCD backlight after leaving unused 3.7 Date Display YYYY/MM/DD Select year/month/day display mode DD/MM/YYYY Select day/month/year display mode www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3.8 Language Language Select a language to use (Note: In construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 4 Authentication Configure settings for authentication method and T&A. 4.1 Auth. Start mode Select a basic (first) recognition method Combination mode Select a combination (additional) recognition method if necessary www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 4.1.1 Auth. Combination Mode (Step 1) Select a combination (additional) recognition method. 4.2 T&A Use T&A Select enable/disable for T&A usage mode (note: in construction) T&A >Recognition Select T&A mode (Attendance etc.) first, then recognition Recognition > T&A After recognition, then input T&A mode (Attendance etc.) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 4.3 T&A Mode

(Note: In construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 5 Mode Configure settings for recognition operation. 5.1 Operation Face detection Select enable/disable for face image saving at recognition (note: to be eliminated) Individual auth. Select enable/disable for permission of individual authentication Dual authentication Select a dual authentication (simultaneous 2 persons) method (note:

in construction) Match timeout Set a recognition trying timeout Card mode Select use or not for CSN in RFID card (note: in construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 5.1.1 Operation Dual Authentication 5.1.2 Operation Match Timeout www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 5.1.3 Operation Card Mode www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 View information of saved log and log search viewer. 6 Log 6.1 Log Info

(Note: In construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 User Tap the User icon in Home screen. Displays the registered user lists in All and Group 1, 2, 3, 4 Enroll button Switch to enroll process Search button Switch to search process Capacity Info button Show the used memory percentage Delete button Switch to delete process www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1 Enroll User Tap the Enroll button to enroll a new user. Enroll User Page ID: Created a user ID number automatically or input manually Name: Input user name manually Individual: Set user individual authentication mode if necessary Admin: Can make a user administrator or not Group: Can make a user belong to a group Bypass Card: Can register a user who holding bypass card (highest priority card) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.1 Name 1.2 Individual Select an individual authentication mode. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.3 Group 1.4 Iris & Face Process Iris & Face tab Selection changes tab to blue color Bio select check boxes are shown Face Select box for face image capture Glasses wearer Select box for face taking off glasses additionally if necessary www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Both eye Either eye Select box for both eye Iris mode Select box for either eye Iris mode Start(+) button Switch to enroll process 1.4.1 Iris & Face Process Face Capture Note: Only operational if Combined Face and Iris mode is active Color Overlay BLUE means too far GREEN means OK RED means too close. Up/Down Arrow Can tilt camera manually if necessary (note: to be eliminated) Switch to Iris Capture stage after good face image acquisition www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.4.1.1 Iris & Face Process Face Capture Tracking Guide Box UI Positioning box appears in order to guide subject. Capture normal face images. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 In case of selection of Glasses wearer check box, will be active for about 3 to 5 seconds. Capture additional face images taken off glasses. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.4.2 Iris & Face Process Iris Capture In case of Tracking Guide Box UI mode, display will be active for about 3 to 5 seconds. 1.4.2.1 Iris & Face Process Iris Capture Tracking Guide Box UI Capture iris images. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.4.3 Iris & Face Process Save Data / Complete Enrollment Reset Cancel OK Return to face capture stage Return to Enroll User screen Move to next screen to complete enrollment 1.4.4 Iris & Face Process Complete Enrollment Cancel Return to User Main screen www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Save user data to complete biometrics Enrollment, then return to User Main screen OK 1.5 Card Card tab Selection changes tab to blue color If "Please tag your card" message appears, touch front-bottom part of device with user card. 1.5.1 Card Save Data www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Card number is shown on tagging a card Clear card number and "Please tag your card" message is shown Return to User Main screen Save user data and return to User Main screen Reset Cancel OK 1.6 Pin PIN tab Selection changes tab to blue color Start (+) button Switch to input screen www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 1.6.1 Pin Input 1.6.2 Pin Save Data Pin number is shown as "*" character. Reset Cancel OK Clear pin number and (+) button is shown Return to User Main screen Save user data to complete PIN enrollment / return to User Main screen www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 2 Search Tap the Search icon to browse list of enrolled users.

(Note: In construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 3 Capacity Info Tap the Capacity Info icon to check storage space.

(Note: In construction) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 4 Delete Delete information of enrolled user. Select All Select all users Deselect All Deselect all users Cancel Delete Return to User Main screen Delete selected user(s) www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 Recognition Process 1.1 Recognition Process Recognition process is identical to the enrollment process. 1.2 Recognition / Authentication Success 1.3 Recognition / Authentication Failure www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016 When access is denied, warning icons can appear on the screen. Glasses: Device detects occlusion by glasses. Color Lens: Device detects colored lenses. Small Eye: Device cannot fully detect iris due to eyelid. www.cmi-tech.com Copyright 2016, all rights reserved EF-45N User Manual, v0.1.1 July 2016

The FCC ID shall be permanently affixed in the rear side of the equipment Label Information FCC ID : 2AJY5UMX-10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Model Name: EF-45N FCC ID AREA

~@CMITECH IRIS CAMERA Model : EF-45NC DC15V === 3.0A s / N:0A1303A000145 IEFECE pd MSIP-CMM-C2M-UMX-10 UK FCC ID:2AJYSUMX-10 Made in Korea

Label Information The FCC ID shall be permanently affixed in the rear side of the equipment FCC ID : 2AJY5UMX-10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Model Name: UMX-10 FCC ID AREA

CMITECH Co., Ltd. May 25, 2022 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Letter of Authorization We, the undersigned, hereby authorize Kenneth Kim of NCT Co.,Ltd. to act on our behalf in all manners relating to application for equipment authorization for FCC ID: 2AJY5UMX-10 including signing of all documents relating to these matters. Any and all acts carried out by Kenneth Kim of NCT Co.,Ltd. on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from CMITECH Co., Ltd. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Sincerely, jung-hee Kim / Manager CMITECH Co., Ltd.

CMITECH Co., Ltd. June 10, 2022 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: 2AJY5UMX-10 Applicant: CMITECH Co., Ltd. Dear Examiner, This is to request a Class II Permissive change for FCC ID: 2AJY5UMX-10 originally granted on 2016/10/13. The change under this application is to changed PCB version and Components as below. Basic model Model name UMX-10 Difference 1. IRLED_LEFT Board Changed

=> Components Changed

- IR LED(850) : 35R16S-85R1 -> MGN1107M

- IR LED(750) : 35R16S-73R1 -> FWR1107MS 2. IRLED_RIGHT Board Changed

=> Components Changed

- IR LED(850) : 35R16S-85R1 -> MGN1107M

- IR LED(750) : 35R16S-73R1 -> FWR1107MS Family model EF-45NC 3. LCD_Gender Board Changed

=> Components Added

- TM0520-0008, BLM18EG221SN1D, 0.1UF, 4.7K 4. Narrow Board Changed

=> Components Changed

- CMOS Sensor : MT9P031M -> IMX335 5. Wide Board Changed

=> Only changed the PCB Layout(component has not been changed). 6. USB Board Changed

=> Only changed the PCB Version(component has not been changed).

(Rev1.0 => Rev2.00) 7. TILT Board Changed

=> Only changed the PCB Version(component has not been changed).

(Rev1.0 => Rev2.00) 8. Main Board Changed

=> Components Changed

- CPU : IMX6--> RK3566

- RAM: K4B2G1646F(DDR3) ->

- PMIC(added): -> RK809-5 H9HCNNNBKUMLXR(DDR4) 9. Combined RF Board (Rev1.0) and HF Antenna Board (Ver1.0.1) to made RFID 3A Board

(Rev 0.80)

=> Only changed the PCB Layout(component has not been changed). I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Sincerely, jung-hee Kim / Manager

CMITECH Co., Ltd. 5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do,14055, Republic of Korea File Name

[EF-45NC] BLK

[EF-45NC] SCH

[EF-45NC] OpDes

[EF-45NC] Part List Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AJY5UMX-10 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:

Exhibit Type Block Diagram Schematics Operational Description Part List The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

Exhibit Type External Photos Internal Photos Test Setup Photos File Name

[EF-45NC] EXT Photo

[EF-45NC] INT Photo

[EF-45NC] Test Setup Photo For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. OR Sincerely, jung-hee Kim / Manager

CMITECH Co., Ltd. 5th Floor, 38, Burim-ro, 170 beon-gil, Dongan-gu, Anyang-si, Gyeonggi-do,14055, Republic of Korea SENA TECHNOLOGIES.Inc May 25, 2022 Federal Communications Commission Authorization and Evaluation Division Applicant: CMITECH Co., Ltd. FCC ID: 2AJY5UMX-10 Attestation for FCC Part 15B Declaration of Conformity. This device has been confirmed to be in compliance with the requirements of ANSI C63.4 & FCC part 15 regulations. The test result has been shown in the NCT test report with number NE2205-F003. And this compliance is subject to the following two conditions:

(1) This device may not cause harmful interference and,

(2) This device must accept any interference received, including interference that may cause undesired operation. jung-hee Kim / Manager

CMITECH Co., Ltd. June 10, 2022 Applicant: CMITECH Co., Ltd. FCC ID: 2AJY5UMX-10 To. Whom it may concern:

We, CMITECH Co.,Ltd. declare that the Added model(M/N:EF-45NC) differ in PCB version and Components as below.

(No change in radio parameters has occurred) Model name Difference Basic model UMX-10 Family model EF-45NC 1. IRLED_LEFT Board Changed

=> Components Changed

- IR LED(850) : 35R16S-85R1 -> MGN1107M

- IR LED(750) : 35R16S-73R1 -> FWR1107MS 2. IRLED_RIGHT Board Changed

=> Components Changed

- IR LED(850) : 35R16S-85R1 -> MGN1107M

- IR LED(750) : 35R16S-73R1 -> FWR1107MS 3. LCD_Gender Board Changed

=> Components Added 4. Narrow Board Changed

=> Components Changed

- TM0520-0008, BLM18EG221SN1D, 0.1UF, 4.7K

- CMOS Sensor : MT9P031M -> IMX335 5. Wide Board Changed

=> Only changed the PCB Layout(component has not been changed). 6. USB Board Changed

=> Only changed the PCB Version(component has not been changed).

(Rev1.0 => Rev2.00) 7. TILT Board Changed

=> Only changed the PCB Version(component has not been changed).

(Rev1.0 => Rev2.00) 8. Main Board Changed

=> Components Changed

- CPU : IMX6--> RK3566

- RAM: K4B2G1646F(DDR3) -> H9HCNNNBKUMLXR(DDR4)

- PMIC(added): -> RK809-5 9. Combined RF Board (Rev1.0) and HF Antenna Board (Ver1.0.1) to made RFID 3A Board

(Rev 0.80)

=> Only changed the PCB Layout(component has not been changed).

(Refer to the Part List and BLK to details) jung-hee Kim / Manager

CMITECH Co., Ltd. December 4, 2021 Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: 2AJY5UMX-10 Applicant: CMITECH Co., Ltd. Dear Examiner, This is to request a Class II Permissive change for FCC ID: 2AJY5UMX-10 originally granted on 2016/10/13. The change under this application is to changed PCB versions as below. Basic model Model name UMX-10 Difference 1. LCD_Gender Board changed.

(Rev1.0 -> Rev2.02) 2. Narrow Board changed.

(Rev1.0 -> Rev5.10) 3. Wide Board changed.

(Rev1.0 -> Rev5.10) 4. Main Board changed.

(Rev1.0 -> Rev5.10) 5. Combined RF Board(Rev1.0) and HF Antenna Board(Ver1.0.1) to made RFID 3A Board(Rev5.10). Family model EF-45NX I attest that the certified device will not be capable of ad-hoc mode operation outside of the grant conditions. Sincerely, jung-hee Kim / Manager

#904,25,248 Beon-gil, Simindae-ro, Dongan-gu, Anyang-si Gyeonggi-do, South Korea, CMITECH Co.,Ltd. Date : 2020. 02. 13. Federal Communications Commission 7435 Oakland Mills Road Columbia MD 21046 c.c. UL Verification Services Certification Division 47173 Benicia Street Fremont, CA 94538, USA To whom it may concern:

I, the undersigned, hereby authorize Ms. Athena Kim/Assistant manager of KCTL Inc. and hereafter referred to as KCTL to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by Ms. Athena Kim/Assistant manager of KCTL Inc. on our behalf shall have the same effect as acts of our own. I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). In authorizing KCTL as our agent, we still recognize that we are responsible to:

a) b) c) d) comply with the relevant provisions of the certification program;

make all necessary arrangements for the conduct of the evaluation, including provision for examining documentation and access to all areas, records (including internal audit reports) and personnel for the purposes of evaluation (e.g. testing, inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which certification has been granted;

do not use our product certification in such a manner as to bring the Certification Division into disrepute and not make any statement regarding our product certification which the Certification Division may consider misleading or unauthorized;

e) f) g) h) i) j) upon suspension or cancellation of certification, discontinue use of all advertising matter that contains any reference thereto and return any certification documents as required by the Certification Division;

use certification only to indicate the products are certified as being in conformity with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a misleading manner;

ensure that any reference to our product certification in communication media such as documents, brochures or advertising, complies with the requirements of the Certification Division;

keep a record of all complaints made known to the us relating to the products compliance with requirements of the relevant standard and to make these records available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies found in products or services that affect compliance with the requirements for certification;

k) document the actions taken. This authorization is valid until further written notice from the applicant. Sincerely Yours, Min-Su Noh/ Manager CMITECH Co.,Ltd.

CMITECH Co.,Ltd.

#904,25,248 Beon-gil, Simindae-ro, Dongan-gu, Anyang-si Gyeonggi-do, South Korea, Date : 2020. 02. 13. UL Verification Services Inc.(formerly UL CCS) 47173 Benicia Street, Fremont, CA 94538 SUBJECT : CMITECH Co.,Ltd. FCC ID : 2AJY5UMX-10 Model number: UMX-10 Class II Permissive Change Orig. Grant Date : 10/13/2016 This is to request a Class II permissive change for FCC ID: 2AJY5UMX-10. Wed like to add a new variant model (EF-45N). The following is the change from the original model:

1) Infrared sensors are added to the basic model (UMX-10). All other internal components are the same as in the previous model. The added part does not affect the wireless part of the product. Due to the change, the internal photos, the schematics, block diagram and other technical documents are updated accordingly. If you have any questions regarding this application, please feel free to contact me. Sincerely, Min-Su Noh/ Manager CMITECH Co.,Ltd.

CMITECH Co.,Ltd.

#904,25,248 Beon-gil, Simindae-ro, Dongan-gu, Anyang-si Gyeonggi-do, South Korea CONFIDENTIALITY REQUEST Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 February 13, 2020 TO WHOM IT MAY CONCERN Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, Samsung Electronics Co., Ltd. requests confidentiality for the following products:

FCC ID Number 2AJY5UMX-10 Product Title/Model Iris Camera / UMX-10, EF-45N The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors regarding the design of our product. This material is not customarily available to the general public and we request that it be withheld from public inspection. We request that the following information submitted be held permanent confidential treatment. If you have any questions, please feel free to contact me at the address shown below. Permanent Confidential Request

-. Schematics

-. Block Diagram

-. Parts list Sincerely, Min-Su Noh/ Manager CMITECH Co.,Ltd.

FC CC ID : 2AJ Y5UMX-10 est for non

-disclosure e Dat te: Oct, 11,

, 2016 mindae-ro, D ongan-gu,An nyang-si Gye eonggi-do, fidentiality FC CC ID: 2AJY Y5UMX-10 on 0.459(a) the following

& (b), < CMI materials su ITECH Co.,L ubmitted in s Ltd.> hereby support of FC requests non CC certificatio n-disclosure on applicatio and on for als contain s e quarded fr r any portion ompetitive ha secrets, prop om competit of this comp arm and prov rietary and te tors under 47 pany confiden vide unjustifie echnical info 7 CFR, sectio ntial materia ed benefits fo ormation, wh on 0.457(d)(2 l to other par or competito ich would 2). Disclosur rties could ca rs. re or ause Co.,Ltd.> und mpanying doc derstands th cumentation at pursuant t will not be m to 47 CFR se made before ection 0.457 the date of th

(d)(1)(ii) disc he grant. closure of the e applicant F FCC, Reque C CMITECH Co

#

904,25,248 B 1 4067, Repub S Subject: Req R Reference nu D Dear FCC TC P Persuant to 4 C Confidential tr F FCC ID: (2AJ Bill(s) of M o.,Ltd. Beon-gil, Sim blic of Korea quest for conf umber:

CB, 7 CFR Secti reatment of t Y5UMX-10) Material Block Diag grams Operationa al Descriptio on c Diagrams Schematic A Above materia c ustomarily be p ublication or s ubstantial co

<

CMITECH C a nd all accom Date> Oct 1

<

<

City> Anyan

<

Name and s M Min-Su Noh /

1, 2016 ng-si Gyeong signature of a Manger ggi-do applicant>

Page 1 / 1

#904

,25,248 Beon-

-gil, Siminda ae-ro, Dongan n-gu,Anyang-s si Gyeo nggi-do, 1406 67, Republic of Korea SU BJECT: F FCC Appl lication f for 2AJY Y5UMX-1 0 To W Whom It May y Concern:

We, the undersi gned, hereb by authorize Hong Kyu, L Lee at UCS C Co.,Ltd. on o our behalf, to o app ly to the Fed deral Comm unications C Commission on our equi ipment. Any and all acts s carried out by Hong Ky yu, Lee at UC CS Co.,Ltd. o n our behalf f shall have the same ef ffect as acts of our own n. This is to advise e that we are e in full com mpliance with h the Anti- D Drug Abuse A Act. We, the e applicant, are not subject to a denial o of federal be enefits pursu uant to Sect ion 5301 of the Anti-Dru ug Act of 1988 8, 21 USC85 3a, and no p party to the application is subject to o a denial of f federal ben nefits purs suant to that t section. Sinc cerely, Date e: 2016.10.13 3 Qua ality Assuran ce Manager

: MinSu No oh