| submitted | available | document details (if available) | source link |
|---|---|---|---|
| May 10 2016 | May 10 2016 | Quick_G]NS21-9QRY(t_415A) Adobe PDF library 10.01 |
| various | User manual | Users Manual | 3.90 MiB | May 10 2016 |
Smart Homeye l Mobile App Quick Guide P/N: 3810-0415A User Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. and
(2) This device must accept any interference received, including interference that may cause undesired operation. Any changes or modications (including the antenna) made to this device that are not expressly approved by the manufacturer may void the users authority to operate the equipment. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operation in conjunction with any other antenna or transmitter. Smart Homeye l Mobile App Quick Guide
-
App Installation Power Connection 1. 1.1. Plug the adaptor to 5V DC power input jack. 1.2. Power LED will turn ON when power is connected correctly. Connect Wi-Fi to AP (using WPS button) 2. 2.1. Press WPS button on the Access Point. 2.2. Press and hold WPS button on the camera for more than 3 seconds. A light on WPS button will change from blinking to solid when connection is established. 2.3. Wi-Fi LED will turn ON when Wi-Fi is connected to the Access Point. 2.4. If the Access Point does not support the WPS function, set the Access Point information using Smart Homeye app. Install Smart Homeye App 3. 3.1. Scan the QR code below on your Android / iOS device to install Smart Homeye app. 3.1. 3.2. Search for the App using Keyword Smart Homeye, Homeye on app store and install it. Product registration to Smart Homeye App 4. 4.1. Connect your mobile device to the Access Point via Wi-Fi before connecting to the camera. 4.2. Open Smart Homeye app. Smart Homeye l Mobile App Quick Guide 1 App Installation 4.3. When the camera is not registered, Add Device message will pop-up. Press OK button to add the camera. The camera can also be added by touching on + button at the upper-right corner. 4.4. Add New Camera. When adding a new camera, touch Next button in Add Camera window. Use Add existing camera Menu to simply select a pre-registered camera using UID & QR Code. (You can share the camera using UID and QR Code.) Android Device iOS Device 3 55 2 Smart Homeye l Mobile App Quick Guide App Installation on Android Devices 4.5. Search for the Homeye. If several Homeye products are detected, make sure to select the right one by checking the Mac Address printed on the bottom of camera. 4.6. Once Homeye is accessed, the available Wi-Fi will be listed. Select the desired Wi-Fi from the list and input the SSID password to connect. Once the registration is done after conguration, the status LED will change from blinking to solid. If the status LED is still blinking, the registration is not successful. Please repeat the registration procedure. Smart Homeye l Mobile App Quick Guide 3 App Installation on Android Devices 4.7. You can view the video by selecting the registered Homeye from the Device list. Online_P2P: Camera is connected using P2P Mode. Online_Relay: Camera is connected using Relay Mode. Offline: Camera is disconnected.
(The Offline maybe due to network or server status, and the status check will repeat every 15 sec.)
!
Caution 1. Please use the DC 5V Power Adaptor included in the package. 2. Dont force to reposition the cameras pan and tilt angle manually as it might damage the camera. 3. Dont drop the camera or apply impact. 4. Micro SD Card is a consumable product, and a long-term use may cause data loss or recording error. Periodic management such as regular format schedule is required. 5. When power is on, please use the Micro SD Card Safe Removal Button to remove the SD Card. 6. There can be a slight shaking during the panning and tilting operation of camera. Smart Homeye l Mobile App Quick Guide 4 App Installation on iOS Devices 4.5. For iOS Devices security, access the Homeye rst using the iOS Wi-Fi Conguration Menu and return to Smart Homeye App. Select the right Homeye from searched Wi-Fi list using iOS Wi-Fi Conguration Menu. If several Homeye products are detected, make sure to select the right one by checking the Mac Address printed on the bottom of camera. 4.6. The default password for Homeye is 12345678. Access Homeye by inputting the Password, and run the Smart Homeye App. Smart Homeye l Mobile App Quick Guide 5 5 App Installation on iOS Devices 4.7. On Smart Homeye App, the available Wi-Fi will be listed. Select the desired Wi-Fi from the list and input the SSID password to connect. Once the registration is done after conguration, the status LED will change from blinking to solid. If the status LED is still blinking, the registration is not successful. Please repeat the registration procedure. Smart Homeye l Mobile App Quick Guide 6 6 App Installation on iOS Devices 4.8. You can view the video by selecting the registered Homeye from the Device list. Online_P2P: Camera is connected using P2P Mode. Online_Relay: Camera is connected using Relay Mode. Offline: Camera is disconnected.
(The Offline maybe due to network or server status, and the status check will repeat every 15 sec.)
!
Caution 1. Please use the DC 5V Power Adaptor included in the package. 2. Dont force to reposition the cameras pan and tilt angle manually as it might damage the camera. 3. Dont drop the camera or apply impact. 4. Micro SD Card is a consumable product, and a long-term use may cause data loss or recording error. Periodic management such as regular format schedule is required. 5. When power is on, please use the Micro SD Card Safe Removal Button to remove the SD Card. 6. There can be a slight shaking during the panning and tilting operation of camera. Smart Homeye l Mobile App Quick Guide 7 7 Specications Camera Video Audio MODEL Image Sensor Full Resolution Sync System S/N Ratio Lens Day & Night Sensitivity
(F1.2, 30 IRE , ICR B/W) White Balance Exposure 3D-DNR Motion Detection Digital Zoom Compression Method Multi-Prole Streaming Intelligent Bit-Rate Control Image Setting Mono Upstream Mono Downstream Network Protocol Network Security Streaming Method Wireless LAN Power Factory Reset Audio Intelligent Video Alarm Events Alarm Buffer (Audio/Video) Smart App. Operating Temperature / Humidity Power Adapter Dimension / Weight Micro SD card External Terminals Alarm & Event Client Software Operating Environment
/ Humidity, Power, Dimensions Local storage Homeye Mini Progressive scan 1/2.9 inch CMOS 2M pixels 1,920 x 1,080pixels (FHD) Internal 62dB or more 2.8mm, F1.8 AUTO(Mechanical ICR)
- Color : 0.12 Lux
- BW : 0 Lux With IR ON AWB (2.000K ~ 10,000K) ESC Supported ON / OFF (1 Programmable Zone) Supported H.265 / H.264 / MJPEG
- 3 simultaneous video proles
- Select the codec type, resolution and frame rates for each prole Hybrid Bit Rate control (VBR+CBR) Text overlay, Privacy mask, De-interlace lter 32Kbps G.726 ADPCM, 64Kbps 16bit -law PCM ~ Microphone 64Kbps 16bit -law PCM ~ Speaker IPv4/v6, TCP, UDP, IGMP, ICMP, ICMPv6, ARP, RARP, PPPoE, RTCP, RTP, RTSP, SDP, HTTP, HTTPS, SMTP, FTP, DHCP, UPnP, NTP, DNS, DynDNS
- User ID & Password protection, IP address ltering
- Digest Authentication, User Access Log
- RTSP streaming with proprietary format for control information.
- Standard RTSP streaming - HTTP streaming IEEE 802.11b/g/n(HT20/40) DC 5V, Max 1.0A Camera Reset Microphone, Speaker Motion Detection PUSH Notication congurable Pre-alarm (5 sec) & Post-alarm (10 ~ 60 sec) Android, iOS 10C ~ 50C / 8 ~ 80% RH DC 5V, 1.5A 62mm x 120mm x 50mm / Approx. 200g Max 64G (32G Micro SD card) Smart Homeye l Mobile App Quick Guide 8
This product uses the FCC Data API but is not endorsed or certified by the FCC