FCC ID: 2BE3U-C6 Encoder

C6 Video Encoder Quick Start Guide C6 4K UHD Video Encoder Quick Start Guide 202311 V1.0 Thanks for purchasing CNDLive product. Please take some time to read this document to get familiar the functions available in the unit. This guide is only for reference and does not constitute a commitment. Product color, dimensions, Web UI, price, availability and specifications are subject to change without notice. C6 Video Encoder Quick Start Guide 1 Packing List Item Device Power Adapter Warranty Card Quick Start Guide Certificate 2 Device Interfaces Unit PCS PCS PCS PCS PCS QTY 1 1 1 1 1 11 12 13 14 Page 1 C6 Video Encoder Quick Start Guide 1 2 3 4 5 6 7 Power Switch Power Port 1000M RJ45 Ethernet Port Micro SD/TF slot 3.5mm LINE IN/OUT USB-A port HDMI Loop 8 9 10 11 12 13 14 HDMI IN SDI Loop SDI IN LCD Screen Up OK Down 3 Device Installation and Connection 3.1 Device Installation Page 2 C6 Video Encoder Quick Start Guide Note Please use the equipped power adapter to power the device. You can connect both HDM and SDI sources, or either one After setup, open the device via the switch button on the panel. 3.2 Check the IP address You can find the IP address through LCD screen (It needs to make sure your network supports DHCP) . Press Down till you see Wired Networkinformation. IP address Wired Configure IP Address DHCP Gateway 3.3 Log in to the Web UI Open a web browser and enter the IP address you see from Chapter 3.1. Then enter the default username and password (admin/admin) to log in to the Web UI. Page 3 3.4 Select Video Source C6 Video Encoder Quick Start Guide The default video source is HDMI, you can select other source via configuration. 1) Click Encoding> Video Signal 2) Pull down the menu, you can select HDMI, SDI, A mix and B mix. 3) Then goes back to Home page, preview the real-time video of current encoding sources. Note If preview is still blue or abnormal screen, please check your source is correctly connected, video resolution formats or change the cable. 3.5 Add Stream Service Click Home on the dashboard, then Stream Serviceto add streams. Select NDI|HX in the popup dialog box. Page 4 1) Fill the name and channel name, group is optional, default group is public. 2) Click OK to save it. 3) Open Studio Monitor from NDI toolsright click to auto discover the current device name and C6 Video Encoder Quick Start Guide configured channel name. 4) Select the corresponding channel name. Studio Monitor will play the received video streams automatically. 4 RTMP Live Streaming Click Home on the dashboard, then Stream Serviceto add streams. Select RTMP/RTMPS in the popup dialog box. Page 5 C6 Video Encoder Quick Start Guide Take YouTube as an example. Firstly obtain the RTMP push URL from the platform. Login to YouTube, click "Live Video" to enter the live room, and click "Use Stream Key" for live broadcast. Then fill in the URL of live broadcast and Stream Key into the URL address of the RTMP push point, and start the streaming service. You will see the video in the live broadcast room at the same time. Note Different platforms have different ways to get the streaming address, please subject to each platform instructions. When the platform RTMP address and live broadcast code are separate, you need to add the symbol

"/" after the RTMP address. The format is: RTMP address/live broadcast code. Username and password are not a must. They are required only when the live broadcast room of the platform is configured. Most platforms can stream directly by default. Page 6 5 Firmware Update C6 Video Encoder Quick Start Guide Click Updatingto check if there is any latest firmware available to download.If yes,select the downloaded firmware and click Firmware Upgrade. After uploaded the firmware successfully, it needs to reboot the device. After clicking ok, the device will restart, please be patient. Note Please do not power off during the upgrade process, otherwise the device couldnt work. Generally, it will take 3-5 minutes to upgrade the device. If its still not completed after 5 minutes, please try refreshing webpage, if you still cant access it, please try to contact for technical support. 6 Restore Factory Settings If the device cannot work normally after modified the parameters or forgot internet IP configuration and couldnt search and find the device, please restore factory settings. Two methods for restoring factory settings:

1) Reset through LCD screen. On the State page, click enter System Settings>Down>Reset, click to confirm the restoring. 2) If you can login to web page, then via the web page, click "Settings>System settings>Restore factory settings". Page 7 C6 Video Encoder Quick Start Guide Note: After restoring factory setting, below parameters will be turned to default value:

Login username and password will be admin. Your device will be restored to obtain a DHCP-assigned IP address by default. All encoding parameters of video and audio will be restored to default value. 7 Support If you need more support, please contact the manufacture. Website: www.cndlive.com Telephone: 86-0755-26888895 Email: support@cndlive.com Page 8 C6 Video Encoder Quick Start Guide FCC Caution:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna. Page 9

USA MEIHUA TRADING INCLETTER OF ATTESTATION TO:

Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA MEIHUA TRADING INC for Service of Process:

Company Name: USA MEIHUA TRADING INC FRN: 0033406166 Contact Name: Harley Quinn Address: 5379 Pine Valley Ct Boulder CO 80301 United States Telephone No: 1-312-363-9424 Email: meihua-trading-inc@foxmail.com Applicant:

Company name: CND Electronic Technology (shenzhen) Co.,Ltd Product Description:Encoder Grantee code:2BE3U FCC ID:2BE3U-C6 FRN:0034962878 Contact Name:ruisheng Zheng Email:ruisheng@cndlcd.com Address:5thh Floor, Xinhua industrial Building No.7,Nanshan District,Shenzhen,

[CND Electronic Technology (shenzhen) Co.,Ltd] Ltdcertifies that, as of the date of this filing of the application with the TCB, [USA MEIHUA TRADING INC] is our designated US agent for service of process for the above referenced FCC ID. [CND Electronic Technology (shenzhen) Co.,Ltdd]accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [USA MEIHUA TRADING INC] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The USA MEIHUA TRADING INC for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause 2.911. This Agreement is valid for permanment. Date: 26/01/2024 Applicants Name:

Title:Manager Signature US Agents Name: Harley Quinn Title: Manager Signature 1/1

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs 0.457 and 0.459 of the Commissions Rules (47 C.F.R.) and Section 552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products:

FCC ID 2BE3U-C6 Model name C6, CX For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:

the Operational Description the Block Diagram the Schematics the Parts Lists the Tune Up Information The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-04-02 Signature Date Printed Name of Signee / Title: Ruisheng Zheng / Research Assistant Company: CND Electronic Technology (shenzhen) Co.,Ltd Address: 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 Fax: N/A Email: ruisheng@cndlcd.com

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commissions Rules (47 C.F.R.) we attest as follows:

We, applicant Company Name: CND Electronic Technology (shenzhen) Co.,Ltd Address:

5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-04-02 Signature Date Printed Name of Signee / Title: Ruisheng Zheng / Research Assistant Company: CND Electronic Technology (shenzhen) Co.,Ltd Address: 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 Fax: N/A Email: ruisheng@cndlcd.com

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commissions Rules (47 C.F.R.) we attest as follows for the product listed below:

FCC ID 2BE3U-C6 We, applicant Model name C6, CX Company Name: CND Electronic Technology (shenzhen) Co.,Ltd Address:

5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 certify that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, 2024-04-02 Signature Date Printed Name of Signee / Title: Ruisheng Zheng / Research Assistant Company: CND Electronic Technology (shenzhen) Co.,Ltd Address: 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 Fax: N/A Email: ruisheng@cndlcd.com

CND Electronic Technology (shenzhen) Co.,Ltd 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Date: April 2, 2024 FCC ID: 2BE3U-C6 Model Number: C6, CX To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, CND Electronic Technology (shenzhen) Co.,Ltd hereby declare that our product

(Encoder) Model Number: C6, CX will disable BT function by software due to marketing purposes. We, CND Electronic Technology (shenzhen) Co.,Ltd, declare that end-user in United States only use WLAN function; We will apply new FCC certification if open BT function due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: Ruisheng Zheng / Research Assistant Company: CND Electronic Technology (shenzhen) Co.,Ltd Address: 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 Fax: N/A E-Mail: ruisheng@cndlcd.com

CND Electronic Technology (shenzhen) Co.,Ltd WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2BE3U -C6 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Ruisheng Zheng / Research Assistant Signature:

Phone: +86-15775097243 Email: ruisheng@cndlcd.com Date: 2024-04-02 Page 1 of 1 Rev.2.0

CND Electronic Technology (shenzhen) Co.,Ltd 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Date: April 2, 2024 FCC ID: 2BE3U-C6 Model Number: C6, CX To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, CND Electronic Technology (shenzhen) Co.,Ltd hereby declare that our product

(Encoder) Model Number: C6, CX board, Schematic, Hardware version, Software version, structure and internal photos are same, named and appearance differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely,

(Signed) Name / Title: ruisheng Zheng/ Research Assistant Company: CND Electronic Technology (shenzhen) Co.,Ltd Address: 5thh Floor, Xinhua industrial Building No.7, Nanshan District, Shenzhen, China Phone: +86-15775097243 Fax Number: N/A E-Mail: ruisheng@cndlcd.com