BT Series Bluetooth Stereo Earphones Quick Start Guide & Initial Set Up Button Location & Descriptions
(Refer to this guide for button descriptions and locations of other features mentioned throughout the manual) Non allergic Micro USB port LED Indicator silicone cushions protection cover Micro USB port Multi-function button MFB POWER YB PHONE CALL 4 G: ee MUSIC PAUSE/PLAY =~"
Button, oe fas rll CeO?
2 Volume 2 Press ONCE : Vol - """ Ewp/y REW" Press ONCE : Vol +
Double Press: REW track ) Control ) Double Press: FWD track
@ Charging the headset Open the Micro USB port cover & connect the Micro USB end of the charging cable to the USB port on the left earcup. Use the included Micro USB cable to connect the headset with a Micro USB port on your computer or with a Micro USB wall adaptor. Charging will start automatically when the headset connected and the red indicator light will turn on. Once charging is complete, the light will turn off. Note: Make sure you charge the unit for a least 8 hours before first use. m Power ON/OFF Power ON > Press & hold MFB for 5-6 seconds to power ON. LED indicator will flash once every 4 seconds. Power OFF > Press & hold MFB for 5-6 seconds to power OFF. LED indicator will go off.
@ How to pair with mobile or other devices Open your Bluetooth settings within your device/cell phone Bluetooth unction To pair BT series bluetooth stereo earphones with your device, press and hold the MFB (multi-function button) for 5-6 seconds until the LED indicator flashes RED/BLUE continuously Press & hold for 5 seconds |
@5-6s On your device, select the BT EARPHONES option
[er EARPHONES
To answer a call The BT EARPHONES is now paired to your source device. Play audio files or answer calls from your mobile/cell phone. Reminder You do not need to repeat the above pairing procedure to the same device on each start-up unless you are pairing a new source device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: TWF-BT-EPSEROL Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. ce Fe & XXX-AAYYYY Bluetooth Front Page Back Page