Trendy & Street-smart Headset Instruction Manual Locations of features Rev. forward/backward Volume Control Multifunction Button (MFB):
Play / Stop / Power ON/OFF /
Answering/Ending phone calls USB port LED Light Mic 3.5mm jack Charging Use the included USB cable to connect the headset with a USB port on your computer or with a USB wall adapter. Charging will start automatically when the headset connected and the red indicator light will turn on. Once charging is complete, the light will turn off. Note: Make sure you charge the unit for at least 8 hours before first use. To headset To PC/USB wall adaptor successful. TS-BT-HEADSET device ID should be stored in the device list of the phone so that no pairing code will be required for the next use. After pairing with your Bluetooth enabled device, start your devices media player and the music will begin playing on your headphones. Volume Adjustment At any time during a phone call, or while playing music, the volume can be changed with the Vol+ or Vol- keys. There will be a tone from the headphones to indicate that the level has reached maximum or minimum volume. Answering/Ending phone calls If you are connected to and playing music from a mobile phone, a brief tone will be heard to notify you that there is an incoming call. Press the MFB once to answer the call and press it once again to end the call. While the call is in progress, the music will pause and once the call has ended, the music play will be automatically resumed. Changing Tracks Simply press the track forward or track backwards button on the side of the headset to change tracks on your music player. Note: This function will only work properly when connected directly to a Bluetooth A2DP compatible music player. For example, this function is inoperable when connected to a Bluetooth transmitter adapter that transmits music from the headphone jack. Low-Power prompt The red LED will flash and a beep sound will be heard from the unit when the battery level is low. Please recharge the unit. Passive Headphones This product can be used as normal headphones by connecting the provided audio cable without activating the Bluetooth function. Connect the cable to the 3.5 jack & the other end to the audio player. To headset To Audio Player Power On/Off Press and hold the multifunction button for about 4 seconds to turn on,and two seconds to turn off. Please note that the headset needs to be paired with another Bluetooth source before it can transmit voice or music. FCC ID: TWF-TS-BT-SER-01 Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Pairing*
Note: Your audio device must support Bluetooth A2DP compatibility to connect with the headset connected to your audio device. Please consult the user manual for the device with which you are attempting to pair for operating instructions. Pairing means creating a trusted relationship between two or more Bluetooth devices. The devices must be paired before they can communicate with each other. Pairing identification is stored for later use, and the devices will automatically recognize each other the next time they are connected. After successfully pairing for the first time, you simply need to follow the directions for POWER ON/OFF above for your device to be recognized by your mobile phone.
* Make sure the headset is off before starting the Pairing procedure. How to pair with mobile phones, iPhone, iPod touch 1. Place the headset within 30 cm of the device with which you are pairing. 2. Press MFB for about 6 seconds or until the red and blue LEDs flash alternately. The headset will now be in pairing mode. 3. Initiate the Bluetooth search function in your mobile phone. Please refer to the users manual for your mobile phone for more information. 4. Select TS-BT-HEADSET in the device list on the phone and follow the instructions to proceed. 5. Follow the instruction to enter the pairing code 0000. The red LED indicator will stop flashing if pairing is This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. R&TTE 015-130014