Gm ee ens mm CDR855BT QUICK START GUIDE J
@ Bluetooth Homi drive HD Record your ride HOM the HOM Jogo and High-Definition Mukimedia hioface are trademarks or reitorad radorars of HDMI Licensing, LC inthe United States andor oer counties, The Bluetooth word marks arepstered trademark ovmed by Bluetoott SIG, cand any use of such marks by Cobra eetonics Corporation Is under Keense. Other trademarks and rade ares are those of tar espectve owners,
(2015 Cobra Electronics Corp, Part Now 480-1030-, Printed in China, Version 8 CONTROLS & CONNECTIONS Quick Release Emergency Recording Mount Button:
Power/Volume Button LED Indicator j Micro USB Port Accessory Port
(Not Used) HDMI Micro SD Output Card Slot Button 1 Button 4 Microphone Button 2 Button 3 The functions of Buttons 1-4 are indicated by the icon directly above each button and change depending on the state of the unit. KEY DASH CAM FEATURES CONTINUOUS LOOP RECORDING When the MicroSD Card is full it will overwrite the oldest clips to make room for new footage. G-SENSOR in accelerometer senses sudden accelerations or collisions
~_/ and automatically protects footage surrounding the incident so that it will not be overwritten by Loop Recording.
(@) PARKING MODE
(SB) Parking Mode provides security while your vehicle is parked.
**"/ If the dash cam doesnt sense any motion for a set time the screen will turn off and recording will stop. If motion is detected or the G-Sensor is triggered, the camera will automatically wake up and start recording again. Note: Parking Mode is OFF by default. You can turn it ON in the Video Settings Menu INSTALLATION
MOUNT Screw the included suction cup into the mount. Slide the mount into the camera and press the lever to secure the unit to your vehicles windshield.
) POWER Plug the unit into your vehicle's cigarette lighter plug
) DRIVE!
When power is applied the unit will automatically turn on and start recording. Press [BTM to stop recording and BEGIN to start again. Pressing at any time will capture a still photo. Press [III to create an Emergency Recording. Emergency Recordings will not be overwritten by Continuous Loop Recording. Press to turn the screen OFF. The dash cam wi continue recording. Press any button to turn the screen back ON. iRadar APP CONNECTION The CDR 855 BT uses a Bluetooth Smart connection to the Cobra iRadar smartphone app. Smartphone integration allows for:
Embedding GPS, Speed, Heading, and G-Sensor Information into video footage recorded on the dash cam.
@ Displaying iRadar driver awareness alerts including:
CB evercice GP specs camoras Re Light Comores By carrion Arcos Download the app from the App Store or Google Play. Speed Traps For iPhone 4s and later with Bluetooth Smart:
a. Power on your dash cam. b. Make sure your iPhone's Bluetooth is ON. The dash cam will NOT APPEAR in the iPhone's Bluetooth Settings Menu. c. Start the Cobra iRadar App. Press the Menu button in the upper left of the app and select Devices. Follow the onscreen instructions to complete the pairing and connection. d. When complete, a connected chime will sound and will turn white on the dash cam display. For Android Devices with Bluetooth Smart:
Power on your dash cam. Enter your Android device's Bluetooth Settings Menu. Scan for Devices and select Drive HD to pair. Enter the Cobra iRadar App. A connected chime will sound, and will turn white on the dash cam display. ange COMPUTER CONNECTION To view videos on a computer connect the dash cam using the included cable. Select Connect to Computer on the dash cam. It will mount as a drive on the computer called DriveHD. Movie clips and photos can be found in the DCIM folder. Video clips are saved as .MOV files and can be played by most video players on both PC and Mac. In order to see embedded GPS, Speed, Heading, and G-Sensor information you must view videos using Cobras Drive HD Player, which is available for PC only. Drive HD Player can be downloaded for free at:
www.cobra.com/dashcamsoftware STORAGE An 8GB MicroSD card comes installed in this dash cam, but it supports cards up to 32GB as long as they are Class IV or higher. For full product manuals, firmware updates and additional language support, www.cobra.com For a list of Bluetooth Smart Ready devices visit:
www.bluetooth.com IC STATEMENT This device complies with Industry Canada's licence-exempt RSSS. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exemptes de licence d'Industrie Canada . Son fonctionnement est soumis aux deux conditions suivantes
(1) Ce dispositif ne peut causer diinterfrences ; et
(2) Ce dispositif doit accepter toute interfrence , y compris les interfrences qui peuvent causer un mauvais fonctionnement de l'appareil FCC Caution 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation 15.21 Changes or modification warning Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between thee quipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
* RF waming for Portable device:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.