FCC ID: BBOMRF75 MARINE RADIO

www.cobra.com Chicago, Illinois 60707 USA 6500 West Cortland Street 2003 CobraElectronics Corporation A1English Espaol Contact Your Local Dealer For Assistance Outside the U.S.A. Part No. 480-086-P Printed in China English and Spanish. productinfo@cobra.com (e-mail). www.cobra.com (on-line: Frequently Asked Questions). Technical AssistanceEnglish only. Faxes can be received at 773-622-2269 (fax). Questions English and Spanish. 8:00 a.m. to 6:00 p.m. CT Mon. through Fri. (except holidays) 773-889-3087 (phone). Customer Assistance Operators English and Spanish. 24 hours a day, 7 days a week 773-889-3087 (phone). Automated Help Desk English only. For Assistance In the U.S.A. NothingComes Close To A Cobra VHF MARINERADIO MRF75 C o b r a M a r i n e M R F 7 5 customer assistance services:

assistance after reading this manual, CobraElectronics offers the following its many features, please refer to this owners manual. If you require further Should you encounter any problems with this product, or not understand Customer Assistance Spanish Customer Assistance you can select for your area. channels and alert you to weather emergencies with a tone on a weather channel all ten NOAA (National Oceanographic and Atmospheric Administration) weather Besides two-way communications, the radio can provide quick access to receive radiotelephone calls to anywhere in the world through a marine operator. help, get information from other boaters, talk to lock and bridge tenders, and make and secondarily for navigation and operational purposes. With it, you can call for vessel-to-vessel and vessel-to-shore station communications, primarily for safety This radio is a VHF transceiver for fixed mounting on your boat. It gives you two-way How Your CobraVHF Marine Radio Works many years of reliable service. Properly used, this Cobraproduct will give you Thank you for purchasing a CobraMarineVHF radio. Our Thanks to You Introduction Owners Manual VHF MARINE RADIOMR F75 Nothing Comes Close To A Cobra Owners Manual Introduction Our Thanks to You Thank you for purchasing a CobraMarine VHF radio. Properly used, this Cobra product will give you many years of reliable service. How Your CobraMarine VHF Radio Works This radio is a VHF transceiver for fixed mounting on your boat. It gives you two-way vessel-to-vessel and vessel-to-shore station communications, primarily for safety and secondarily for navigation and operational purposes. With it, you can call for help, get information from other boaters, talk to lock and bridge tenders, and make radiotelephone calls to anywhere in the world through a marine operator. Besides two-way communications, the radio can provide quick access to receive all ten NOAA (National Oceanographic and Atmospheric Administration) weather channels and alert you to weather emergencies with a tone on a weather channel you can select for your area. Customer Assistance Customer Assistance Should you encounter any problems with this product, or not understand its many features, please refer to this owners manual. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services:

For Assistance In the U.S.A. Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone). Customer Assistance Operators English and Spanish. 8:00 a.m. to 6:00 p.m. CT Mon. through Fri. (except holidays) 773-889-3087 (phone). Questions English and Spanish. Faxes can be received at 773-622-2269 (fax). Technical Assistance English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo@cobra.com (e-mail). Printed in China Part No. 480-086-P For Assistance Outside the U.S.A. Contact Your Local Dealer English A1 English 2003 Cobra Electronics Corporation 6500 West Cortland Street Chicago, Illinois 60707 USA www.cobra.com Introduction Controls and Indicators Introduction Microphone/Speaker Radio Status and Data Display Instant Channel 16/9 Button Backlit LCD Screen Down Button Up Button Active Channel Number Weather/

UIC Button Memory Scan/

Memory Clear Button On-Off Power/

Volume Knob Microphone Cord Connection Socket High/Low Power Button Position Coordinates Latitude and Longitude Tri-Watch Button Simplex Operation Icon Call/Set Button Squelch Knob DCS Distress Button

(Behind Red Spring Loaded Cover) Antenna A2 English Power Connection External Speaker Global Positioning System (GPS) Volume Down Button Microphone/Speaker With Auxiliary Controls Up/Down Buttons Can be used instead of those on the transceiver. Instant Channel 16/9 Button Can be used instead of the one on the transceiver. Volume Up/Down Button Can be used instead of the On-Off Power/Volume knob. Down Button Talk Button Volume Up Button Microphone/

Speaker Up Button Instant Channel 16/9 Button Features Dual Power Selectable to one (1) or twenty-five

(25) watts output power for near or distant calling. USA/International/Canada Channels Allows operation on any of the three (3) different channel maps established for these areas. 10 NOAA Weather Channels Instant access to all of the National Weather Channels, 24 hours a day. Emergency Weather Alert Can alert you with an audible tone and visual alarm if threatening weather is nearby. Instant Channel 16/9 Instant access to the priority Channel 16 and calling Channel 9. Digital Selective Calling (DSC) Allows sending a distress message at the touch of a button as well as specific station-to-station calls. A3 English Scan Lets you scan through all selected memory channels to find conversations in progress. Tri-Watch Lets you monitor three (3) channels at once Channel 16, Channel 9, and one (1) user programmable channel. Noise Canceling Microphone Blocks background noise to let your voice be heard at the receiving station. Controls on the Microphone Handy control buttons on the microphone let you operate one (1) handed at a distance from the radio. Illuminated Buttons Helps you quickly find the buttons you need in low light conditions. Mounting Kits Included Radio can be mounted on, under, or in the dash using one (1) of the included brackets. Waterproof Submersible to one (1) meter of water for 30 minutes meets Standard JIS7. Introduction Table of Contents Introduction Our Thanks to You . A1 Customer Assistance . A1 Controls and Indicators . A2 Microphone/Speaker . A3 Product Features . A3 Important Safety Information . 2 Recommendations for Marine Communication . 3 VHF Marine Radio Protocols FCC Information . 4 VHF Marine Radio Procedures . 6 Voice Calling . 7 Digital Selective Calling . 8 Maritime Mobile Service Identity (MMSI) . 9 Radiotelephone Calls . 10 Emergency Messages and Distress Procedure . 10 VHF Marine Channel Assignments . 14 World City Time Zones . 24 NOAA Weather Channels . 26 Installation and Start-Up Included in This Package . 27 Mounting and Powering The Radio . 28 Antenna Requirements and Attachment . 30 External Devices and Connections . 32 Operating Your Radio Getting Started . 35 Set-Up Routines . 40 Voice Transmission . 44 Weather Radio and Alerts . 47 Advanced Operation . 48 Channel 16/9 . 48 Tri-Watch . 49 Scan . 50 Memory Channels . 50 Memory Scan . 51 DSC Set-Up . 52 DSC Operation . 60 Maintenance and Troubleshooting . 74 Specifications . 75 Warranty Warranty . 76 Customer Service Product Service . 77 Optional Accessories and Order Form . 78 Nothing comes close to a Cobra 1 F55_General.qxd 7/25/03 1:51 PM Page 2 Introduction Important Safety Information Introduction Recommendations for Marine Communication Important Safety Information Before installing and using your CobraMarine VHF radio, please read these general precautions and warnings. Warning and Caution Statements To make the most of this radio, it must be installed and used properly. Please read the installation and operating instructions carefully before installing and using it. Special attention must be paid to the WARNING and CAUTION statements in this manual. WARNING Statements identify conditions that could result in personal injury or loss of life. CAUTION Statements identify conditions that could cause damage to the radio or other equipment. Safety Training Information Your radio generates electromagnetic RF (radio frequency) energy when it is transmitting. To insure that you and those around you are not exposed to excessive amounts of that energy DO NOT touch the antenna when transmitting and KEEP yourself and all others on your vessel the required distance away from the antenna while transmitting. SEE page 29 in the antenna requirements section for further information. WARNINGS DO NOT operate the radio without a proper antenna or equivalent dummy load attached. Doing so may expose you to excessive RF energy and will damage the radio. DO NOT operate the radio in an explosive atmosphere, near blasting sites, or in any area where signs are posted prohibiting radio transmissions. NEVER connect the transceiver to AC power. It can be a fire hazard, may cause an electric shock, and may damage the transceiver. NEVER mount the transceiver or microphone where they might interfere with operation of your vessel or cause injury. DO NOT allow children or anyone unfamiliar with proper procedures to operate the radio without supervision. CAUTIONS AVOID using or storing the radio at temperatures below -4F (-20C) or above 140F (60C). NEVER connect the transceiver to DC power greater than 16 volts or to any DC source with reversed polarity. Doing so will damage the transceiver. DO NOT cut the power cables attached to the transceiver. Improper reconnection with reversed polarity will damage the transceiver. POSITION your radio, external speakers, and cables at least three (3) feet (0.9 m) away from your vessels magnetic navigation compass. CHECK your compass before and after installation to be sure that it has not introduced any deviation. DO NOT attempt to service any internal parts yourself. Have any necessary service performed by a qualified technician. DO NOT drop the transceiver or microphone. Doing so may crack the case or damage a waterproof seal. Once these items have been dropped, the original waterproofing cannot be guaranteed. DO NOT use chemicals or solvents such as mineral spirits and alcohol to clean your radio. They may damage the case surfaces. Changes or modifications to your radio MAY VOID its compliance with FCC rules and make it illegal to use. Recommendations for Marine Communication The frequencies your radio uses are set aside to enhance safety afloat and for vessel navigation and operational messages over a range suitable for nearshore voyages. If the twenty-five (25) watt maximum output of your radio isnt sufficient for the distances you travel from the coast, consider installing more powerful radio equipment such as HF Single Sideband or Satellite Radio for your vessel. The U.S. Coast Guard does not endorse cellular telephones as substitutes for marine radios. They generally cannot communicate with rescue vessels and, if you make a Distress call on a cellular telephone, only the party you call will be able to hear you. Additionally, cellular telephones may have limited coverage over water and can be hard to locate. If you dont know where you are, the Coast Guard will have difficulty finding you if youre using a cellular telephone. However, cellular phones can have a place on board where cellular coverage is available to allow social conversations and keep the marine frequencies uncluttered and available for their intended uses. 2 English Nothing comes close to a Cobra 3 VHF Marine Radio Protocols FCC Information VHF Marine Radio Protocols FCC Information FCC INFORMATION CobraMarine VHF radios comply with the FCC (Federal Communication Commission) requirements that regulate the Maritime Radio Service. This CobraMarine radio incorporates a VHF FM transceiver designed for use in the frequency range of 156.025 to 163.275 MHz. It requires 13.8 volts DC and has a switchable RF output power of one (1) or twenty-five (25) watts. The transceiver is capable of RTCM SC 101 DSC (Digital Selective Calling) operation. The radio operates on all currently allocated marine channels and is switchable for use according to U.S.A., International, or Canadian regulations. It features instant access to emergency Channel 16 and calling Channel 9 as well as NOAA (National Oceanic and Atmospheric Administration) All Hazards Radio with Alert that can be accessed by pressing one key. IMPORTANT NOTICE: FCC LICENSING INFORMATION Station License An FCC ship station license is no longer required for any vessel traveling in U.S.A. waters which uses a VHF marine radio, RADAR, or EPIRB (Emergency Position Indicating Radio Beacon), and which is not required to carry radio equipment. However, any vessel required to carry a marine radio on an international voyage, carrying a HF single side band radiotelephone, or carrying a marine satellite terminal must obtain a station license. FCC license forms and applications for ship and land stations can be downloaded through the internet at www.fcc.gov/forms. Forms can also be obtained by calling the FCC at 888-225-5322. International Station License If your vessel will be entering the sovereign waters of a country other than the U.S.A. or Canada, you should contact that country's communications regulatory authority for licensing information. Radio Call Sign Currently, the FCC does not require recreational boaters to have a license. The United States Coast Guard recommends that the boats registration number and state of registry (e.g. Illinois 1234 AB) be used as a call sign and be clearly visible on the vessel. Canadian Ship Station License You may need a license if your vessel is operated in Canadian waters. Please contact the nearest field office or write: Industry of Canada, Radio Regulatory Branch, Attn: DOSP, 300 Slater Street, Ottawa, Ontario, Canada K1A 0C8. User Responsibility and Operating Locations All users are responsible for observing domestic and foreign government regulations and are subject to severe penalties for violations. The VHF frequencies on your radio are reserved for marine use and require a special license to operate from land, including when your boat is on its trailer. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC Warnings: Replacement or substitution of transistors, regular diodes, or other parts of a unique nature, with parts other than those recommended by Cobra may cause a violation of the technical regulations of part 80 of the FCC Rules, or violation of type acceptance requirements of part 2 of the Rules. 4 English Nothing comes close to a Cobra 5 VHF Marine Radio Procedures VHF Marine Radio Protocols VHF Marine Radio Procedures Maintain Your Watch Whenever your boat is underway, the radio must be turned On and be tuned to Channel 16 except when being used for messages. Power Try one (1) watt first if the station being called is within a few miles. If there is no answer, switch to a higher power. This will conserve your battery and you will sound better since your signal will not overpower the nearby station. Calling Coast Stations Call a coast station on its assigned channel. You may use Channel 16 when you do not know the assigned channel. Calling Other Vessels Call other vessels on Channel 16 or on Channel 9. (Channel 9 is preferred for recreational vessel use.) You may also call on ship-to-ship channels when you know that the vessel is listening on a ship-to-ship channel. Limits On Calling You must not call the same station for more than 30 seconds at a time. If you do not get a reply, wait at least two (2) minutes before calling again. After three (3) calling periods, wait at least 15 minutes before calling again. Change Channels After contacting another station on a calling channel, change immediately to a channel which is available for the type of message you want to send. Station Identification Identify, in English, your station by your FCC call sign, ship name, the state registration number, or other official number at both the beginning and end of each message. Prohibited Communications You MUST NOT transmit:

False distress or emergency messages. Messages containing obscene, indecent, or profane words or meaning. General calls, signals, or messages (messages not addressed to a particular station) on Channel 16, except in an emergency or if you are testing your radio. When you are on land. 6 English VHF Marine Radio Protocols Voice Calling Voice Calling To Call Another Vessel Or A Shore Installation Such As A Lock Or Bridge Tender:

Make sure your radio is On. Select Channel 16 and listen to make sure it is not being used. NOTE Channel 9 may be used by recreational vessels for general-purpose calling. This frequency should be used whenever possible to relieve congestion on Channel 16. When the channel is quiet, press the Talk button and call the ship you wish to call. (Hold the microphone a few inches from your face and speak directly into it in a normal tone of voice clearly and distinctly.) Say [name of station being called] THIS IS [your vessels name or call sign]. Once contact is made on the calling channel, you must switch to a proper working channel. See the channel listing on page 14. For Example The vessel Corsair calling the vessel Vagabond:

Corsair: Vagabond, this is Corsair. Vagabond: Corsair, this is Vagabond. Reply 72 (or any proper working channel). Corsair: 72 or Roger After communications are completed, each vessel must sign off with its call sign or vessel name and switch to Channel 16. NOTE For best sound quality at the station your calling, hold the microphone on the front of the radio at least two (2) inches (5 cm) from your mouth and slightly off to one side. Speak in a normal tone of voice. Nothing comes close to a Cobra 7 VHF Marine Radio Protocols Digital Selective Calling Digital Selective Calling (DSC) Digital Selective Calling is a semi-automated system for establishing a radio call. It has been designed by the International Maritime Organization (IMO) as an international standard for VHF, MF, and HF calls and is part of the Global Maritime Distress and Safety System (GMDSS). DSC will eventually replace aural (listening) watches on distress frequencies and will be used to announce routine and urgent maritime safety information broadcasts. Until DSC is fully implemented, it is still necessary to maintain a listening watch on Channel 16. The DSC system allows mariners to instantly send a distress call with GPS position coordinates (requires a GPS receiver to be connected to the radio) to the Coast Guard and other vessels within range of the transmission. DSC also allows mariners to initiate and receive distress, urgent, safety, routine, position request, position send, and group calls between vessels equipped with DSC capable radios. Maritime Mobile Service Identity (MMSI) VHF Marine Radio Protocols Maritime Mobile Service Identity (MMSI) An MMSI is a nine (9) digit number used on a marine radio capable of using Digital Selective Calling (DSC). It is used to selectively call other vessels or shore stations and is similar to a telephone number. For your CobraMarine radio to operate in the DSC mode, you must enter your Maritime Mobile Service Identity (MMSI) number. See page 53 for instructions on how to enter it. The MMSI Number Is Available In The U.S.A. From Any Of Three (3) Sources:

BoatU.S.: 1-800-563-1536 www.boatus.com/mmsi Maritel: 1-888-Maritel (1-888-627-4835) Sea Tow International: 1-631-765-3660 www.seatow.com In Canada, Contact:

Industry Canada, Victoria District Office (only available on the Internet):

http://strategis.ic.gc.ca/SSG/sf01032e.html To Obtain an MMSI Number Outside the U.S.A. Users can obtain an MMSI from their countrys telecommunications authority or ship registry. This may involve amending or obtaining a ship station license. WARNING This equipment is designed to generate a digital maritime distress and safety signal to facilitate search and rescue. To be effective as a safety device, this equipment must be used only within communication range of a shore-based VHF marine channel to distress and safety watch system. The range of the signal may vary, but under normal conditions should be approximately 20 nautical miles. 8 English Nothing comes close to a Cobra 9 VHF Marine Radio Protocols Radiotelephone Calls Radiotelephone Calls Boaters may make and receive telephone calls to and from any number on the telephone network by using the services of Public Coast Stations. Calls can be made for a fee between your radio and telephones on land, sea, and in the air. See pages 14 through 23 for the Public Correspondence (Marine Operator) channels. If you plan to use these services, consider registering with the operator of the Public Coast Station that you plan to work through. Those services can provide you with detailed information and procedures to follow. CAUTION Although using these services will not damage your radio, you may disclose privileged information during a radiotelephone call. Keep in mind that your transmission is not private, as it is on a regular telephone. Both sides of the conversation are being broadcast and can be heard by anyone who has a radio and tunes to the channel you are using. Emergency Messages and Distress Procedure The ability to summon assistance in an emergency is the primary reason to have a VHF marine radio. The marine environment can be unforgiving, and what may initially be a minor problem can rapidly develop into a situation beyond your control. The Coast Guard monitors Channel 16, responds to all distress calls, and coordinates all search and rescue efforts. Depending on the availability of other capable vessels or commercial assistance operators in your vicinity, Coast Guard or Coast Guard Auxiliary craft may be dispatched. In any event, do communicate with the Coast Guard (on Channel 22A after calling on Channel 16) as soon as you experience difficulties and before your situation becomes an emergency. Use the emergency message procedures only after your situation has become grave or you are faced with a sudden danger threatening life or property and requiring immediate help. If you are merely out of gas, do not send an emergency message. Drop your anchor and call a friend or marina to bring the fuel you need or give you a tow. Emergency Messages and Distress Procedure VHF Marine Radio Protocols Marine Emergency Signals The three (3) spoken international emergency signals are:

MAYDAY The distress signal MAYDAY is used to indicate that a station is threatened by grave and imminent danger and requests immediate assistance. PAN The urgency signal PAN is used when the safety of the vessel or person is in jeopardy. (This signal is properly pronounced pahn.) SECURITE The safety signal SECURITE is used for messages about the safety of navigation or important weather warnings. (This signal is properly pronounced see-cure-it-tay.) When using an international emergency signal, the appropriate signal is to be spoken three (3) times prior to the message. If You Hear A Distress Call You must give any message beginning with one (1) of these signals priority over any other messages. ALL stations MUST remain silent on Channel 16 for the duration of the emergency unless the message relates directly to the emergency. If you hear a distress message from a vessel, stand by your radio. If it is not answered, YOU should answer. If the distressed vessel is not nearby, wait a short time for others who may be closer to acknowledge. Even if you cannot render direct assistance, you may be in a position to relay the message. 10 English Nothing comes close to a Cobra 11 Emergency Messages and Distress Procedure VHF Marine Radio Protocols Emergency Messages and Distress Procedure VHF Marine Radio Protocols Marine Distress Procedure Speak slowly clearly calmly. 1. Make sure your radio is On. 2. Select VHF Channel 16. 3. Press Talk button and say:

MAYDAY MAYDAY MAYDAY.

(Or PAN PAN PAN, or SECURITE SECURITE SECURITE.) 4. Say:

THIS IS [your vessel name or call sign]. 5. Say:

MAYDAY (or PAN or SECURITE)

[your vessel name or call sign]. 6. Tell where you are:

(what navigational aids or landmarks are near). 7. State the nature of your distress. 8. State the kind of assistance needed. 9. Give number of persons aboard and conditions of any injured. 10. Estimate present seaworthiness of your vessel. 11. Briefly describe your vessel (length, type, color, hull). 12. Say:

I WILL BE LISTENING ON CHANNEL 16. 13. End message by saying:

THIS IS [your vessel name or call sign] OVER. 14. Release Talk button and listen. Someone should answer. If not, repeat the call, beginning at Item 3 above. Keep the radio nearby. Even after your message has been received, the Coast Guard can find you more quickly if you can transmit a signal for a rescue boat to hone in on. For Example Mayday Mayday Mayday This is Corsair Corsair Corsair (or Illinois 1234 AB three (3) times) Mayday Corsair (or Illinois 1234 AB) Navy Pier bears 220 degrees magnetic distance five (5) miles Struck submerged object and flooding need pump and tow Four adults, three children aboard no one injured Estimate we will remain afloat one half (12) hour Corsair (or Illinois 1234 AB) is 26 foot sloop with blue hull and tan deck house I will be listening on Channel 16 This is Corsair (or Illinois 1234 AB) Over It is a good idea to write out a script of the message form and post it where you and others on your vessel can see it when an emergency message needs to be sent. Marine Distress Procedure DSC Once your radio is connected to a GPS device and is properly set-up with your MMSI, simply lifting the red door and pressing the red button will automatically send a complete distress call on Channel 70. See the DSC Operation section on pages 60 to 73 for further information and page 60 instruction on sending a manual DSC distress call. 12 English Nothing comes close to a Cobra 13 VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Map Frequency VHF Marine Channel Assignments Power Limits VHF Marine Radio Protocols Channel Use Intl Canada Transmit Receive 160.650 156.050 160.700 160.750 156.150 160.800 156.200 160.850 156.250 156.300 160.950 156.350 156.400 156.450 156.500 156.550 156.600 156.050 156.050 156.100 156.150 156.150 156.200 156.200 156.250 156.250 156.300 156.350 156.350 156.400 156.450 156.500 156.550 156.600 Channel Number 01 01A 02 03 03A 04 04A 05 05A 06 07 07A 08 09 10 11 12 13 14 15 15 16 17 USA 156.650 156.650 1 Watt USA and CAN 156.700 Rx Only 156.750 156.800 156.850 156.700 156.750 156.750 156.800 156.850 1 Watt CAN and INT 1 Watt USA and CAN 01 01A 02 03 03A 04 04A 05 05A 06 07 07A 08 09 10 11 12 13 14 15 15 16 17 Public Correspondence (Marine Operator) Port Operations and Commercial, VTS in selected areas Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Government Only Public Correspondence (Marine Operator), Port Operations, Ship Movement West Coast (Coast Guard Only); East Coast (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations, VTS in selected areas Intership Safety Public Correspondence (Marine Operator), Port Operations, Ship Movement Commercial Commercial (Intership Only) Boater Calling Channel, Non-Commercial (Recreational) Commercial Commercial, VTS in selected areas Port Operations, VTS in selected areas Intership Navigation Safety (Bridge-to-Bridge). In U.S. waters, large vessels maintain a listening watch on this channel. Port Operations, VTS in selected areas Environmental (Receive Only). Used by class C EPIRBs. Canada (EPIRB Buoys Only); International (On-Board Communication) International Distress, Safety and Calling State Controlled (U.S.A. Only) 14 English Nothing comes close to a Cobra 15 VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Number 18 18A 19 19A 20 20A 21 21A 22 22A 23 23A 24 25 26 27 28 60 61 61A 62 62A Channel Map Frequency USA Intl Canada Transmit Receive 161.500 156.900 161.550 156.950 161.600 157.000 161.650 157.050 161.700 156.900 156.900 156.950 156.950 157.000 157.000 157.050 157.050 157.100 157.100 157.100 157.150 157.150 157.200 157.250 157.300 157.350 157.400 156.025 156.075 161.750 157.150 161.800 161.850 161.900 161.950 162.000 160.625 160.675 156.075 156.075 156.125 156.125 160.725 156.125 Power Limits 1 Watt CAN VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Use 18 18A 19 19A 20 20A 21 21A 22 22A 23 23A 24 25 26 27 28 60 61 61A 62 62A Port Operations, Ship Movement Commercial Port Operations, Ship Movement Commercial Canada (Coast Guard Only); International (Port Operations, Ship Movement) Port Operations Port Operations, Ship Movement U.S. (Government Only); Canada (Coast Guard Only) Port Operations, Ship Movement U.S. and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts that are announced on Channel 16 Public Correspondence (Marine Operator) Government Only Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator), Port Operation, Ship Movement U.S. (Government Only); Canada (Coast Guard Only);

West Coast (Coast Guard Only); East Coast (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement West Coast (Coast Guard Only); East Coast (Commercial Fishing) 16 English Nothing comes close to a Cobra 17 VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Number 63 63A 64 64A 65 65A 66 66A 67 68 69 70 71 72 73 74 77 USA Channel Map Frequency Intl Canada Transmit Receive 160.775 156.175 160.825 156.225 160.875 156.275 160.925 156.325 156.175 156.175 156.225 156.225 156.275 156.275 156.325 156.325 Power Limits 1 Watt CAN 156.375 156.375 1 Watt USA 156.425 156.425 156.475 156.475 RX only 156.525 156.575 156.575 156.625 156.625 156.675 156.675 156.725 156.725 156.875 156.875 1 Watt USA and CAN VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Use 63 63A 64 64A 65 65A 66 66A 67 68 69 70 71 72 73 74 77 Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations and Commercial, VTS in selected areas Public Correspondence (Marine Operator), Port Operations, Ship Movement U.S. (Government Only); Canada (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations U.S. (Commercial). Used for bridge-to-bridge communications in lower Mississippi River (Intership Only); Canada (Commercial Fishing), S&R Non-Commercial (Recreational) U.S. (Non-Commercial, Recreational); Canada (Commercial Fishing Only);

International (Intership, Port Operations, Ship Movement) Digital Selective Calling (Voice communications not allowed) U.S. and Canada (Non-Commercial, Recreational);

International (Port Operations, Ship Movement) Non-Commercial (Intership Only) U.S. (Port Operations); Canada (Commercial Fishing Only);

International (Intership, Port Operations, Ship Movement) U.S. (Port Operations); Canada (Commercial Fishing Only);

International (Intership, Port Operations, Ship Movement) Port Operations (Intership only). Restricted to communications with pilots for movement and docking of ships. 18 English Nothing comes close to a Cobra 19 VHF Marine Channel Assignments VHF Marine Radio Protocols Channel Number 78 78A 79 79A 80 80A 81 81A 82 82A 83 83A 84 84A 85 85A 86 86A 87 87A 88 88A Channel Map Frequency USA Intl Canada Transmit Receive 161.525 156.925 161.575 156.975 161.625 157.025 161.675 157.075 161.725 157.125 161.775 157.175 161.825 157.225 161.875 157.275 161.925 157.325 161.975 157.375 156.925 156.925 156.975 156.975 157.025 157.025 157.075 157.075 157.125 157.125 157.175 157.175 157.225 157.225 157.275 157.275 157.325 157.325 157.375 157.375 157.425 162.025 157.425 157.425 NOTE Many of the plain numbered channels, such as 01, 02, and 03, transmit and receive on different frequencies. This is termed duplex operation. The rest of the plain numbered channels and all of the A channels, such as 01A, 03A, and 04A, transmit and receive on a single frequency, which is termed simplex operation. Your radio automatically adjusts to these conditions. When in simplex operation, the A icon will appear on the LCD (see illustration on page A3). VHF Marine Channel Assignments Power Limits VHF Marine Radio Protocols Channel Use 78 78A 79 79A 80 80A 81 81A 82 82A 83 83A 84 84A 85 85A 86 86A 87 87A 88 88A Public Correspondence (Marine Operator) Non-Commercial (Recreational) Port Operations, Ship Movement Commercial (Also Non-Commercial only in Great Lakes) Port Operations, Ship Movement Commercial (Also Non-Commercial only in Great Lakes) Port Operations, Ship Movement U.S. (Government Only; Environmental Protection Operations) Public Correspondence (Marine Operator), Port Operation, Ship Movement U.S. (Government Only); Canada (Coast Guard Only) Canada (Coast Guard Only) U.S. (Government Only); Canada (Coast Guard Only) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Ship to Coast). In U.S. only within 75 miles of Canadian Border. Commercial Intership only NOTE All channels are pre-programmed at the factory according to international regulations and those of the FCC (U.S.A.) and Industry Canada (Canada). They cannot be altered by the user nor can modes of operation be changed between simplex and duplex. 20 English Nothing comes close to a Cobra 21 VHF Marine Channel Assignments VHF Marine Radio Protocols VHF Marine Channel Assignments in the U.S.A. Distress, Safety, and Calling Channel 16 Getting the attention of another station (calling) or in emergencies

(distress and safety). Calling Channel 9 General purpose (non-emergency) calling by non-commercial vessels. Recreational boaters are urged to use this channel to reduce congestion on Channel 16. Intership Safety Channel 6 Ship-to-ship safety messages and for search and rescue messages to Coast Guard ships and aircraft. Coast Guard Liaison Channel 22A To talk to the Coast Guard (non-emergency) after making contact on Channel 16. Non-Commercial Channels 68*, 69, 71, 72, 78, 79*, 80*

Working channels for small vessels. Messages must be about needs of the vessel, such as fishing reports, berthing, and rendezvous. Use Channel 72 only for ship-to-ship messages. Commercial Channels 1, 7, 8, 9, 10, 11, 18, 19, 63, 67, 72, 79, 80, 88*

Working channels for working ships only. Messages must be about business or needs of the ship. Use Channels 8, 67, 72, and 88 only for ship-to-ship messages. VHF Marine Channel Assignments VHF Marine Radio Protocols Public Correspondence (Marine Operator) Channels 24, 25, 26, 27, 28, 84, 85, 86, 87, 88*

For calls to marine operators at public coast stations. You can make and receive telephone calls through these stations. Port Operations Channels 1*, 5*, 11, 12*, 14*, 20, 63*, 65, 66, 73, 74, 77*

Used for directing the movement of ships in or near ports, locks, or waterways. Messages must be about operational handling, movement, and safety of ships. Navigational Channels 13, 67 Channels are available to all vessels. Messages must be about navigation, including passing or meeting other vessels. These are also the main working channels for most locks and drawbridges. You must keep your messages short and power output at no more than one (1) watt. Maritime Control Channel 17 For talking to vessels and coast stations operated by state or local governments. Messages must be about regulation and control, boating activities, or assistance. Digital Selective Calling Channel 70 This channel is set aside for distress, safety, and general calling using only digital selective calling techniques. Voice communication is prohibited; your radio cannot transmit voice messages on this channel. Weather Channels Wx 1 thru 10 Receive-only channels for NOAA weather broadcasts. You cannot transmit on them. NOTE

* These channels are restricted to the listed uses in certain parts of the country or for certain types of users only. Consult FCC rules or a knowledgeable radio operator before using them. 22 English Nothing comes close to a Cobra 23 Introduction World City Time Zones Introduction World City Time Zones Longitudinal Zone Offset City Longitudinal Zone Offset City E172.50 to W172.50 W172.50 to W157.50 W157.50 to W142.50 W142.50 to W127.50 W127.50 to W112.50 W112.50 to W097.50 W097.50 to W082.50 W082.50o to W067.50 W067.50 to W052.50 W052.50 to W037.50 W037.50 to W022.50 W022.50 to W007.50

-12

-11

-10

-9

-8

-7

-6

-5

-4

-3

-2

-1 IDLW (International Date Line West) W007.50 to E007.50 GMT

+ 0 London Nome Honolulu Yukon STD Los Angeles Denver Chicago New York Caracas Rio de Janeiro Fernando de Noronha Azores Island E007.50 to E022.50 E022.50 to E037.50 E037.50 to E052.50 E052.50 to E067.50 E067.50 to E082.50 E082.50 to E097.50 E097.50 to E112.50 E112.50 to E127.50 E127.50 to E142.50 E142.50 to E157.50 E157.50 to E172.50 E172.50 to W172.50

+1

+2

+3

+4

+5

+6

+7

+8

+9

+10

+11

+12 Rome Cairo Moscow Abu Dhabi Maldives Dhuburi Bangkok Hong Kong Tokyo Sydney Solomon Islands Auckland 24 English Nothing comes close to a Cobra 25 VHF Marine Radio Protocols NOAA Weather Channels Installation and Start-Up Included in This Package NOAA Weather Channels Monitoring the weather will probably be a frequent use of your radio. The National Oceanic and Atmospheric Administration (NOAA) provides continuous, around-the-clock broadcasts of the latest weather information. Taped weather messages run every four (4) to six (6) minutes and are revised every two (2) or three (3) hours, or as needed. The Coast Guard also announces weather and other safety warnings on Channel 16 and DSC Channel 70. It then broadcasts the warning on Channel 22A. Smart boaters keep an eye on safety and an ear to the radio and never let the weather catch them unaware. NOAA Emergency Weather Alert In the event of a major storm or other weather condition requiring vessels at sea or on other bodies of water to be notified, NOAA broadcasts a 1050 Hz tone that receivers such as your CobraMarine VHF radio can detect and warn you of a Weather Alert Condition. When the Weather Alert mode on your radio is On, this signal will produce the Weather Alert Alarm Tone from the speaker and a flashing Weather Alert message on the LCD to signal that a weather alert is being broadcast. To hear the warning itself, you will need to switch to the Weather Channel you selected. Test To test this system, NOAA broadcasts the 1050 Hz signal every Wednesday sometime between 11 a.m. and 1 p.m. in each local time zone. Any receiver that can detect the weather alert tone may use this feature to verify that this feature is functioning properly. Weather Frequency Included in This Package You should find all of the following items in the package with your CobraMarine VHF radio:

Transceiver*

Transceiver Flush Mount Kit Transceiver Dash Mount Kit Microphone/Speaker Mic/Spkr Mounting Kit Spare Fuse (6A, 250V) Channel RX Frequency MHz Operating Instruction Manual Warning Sticker 1 2 3 4 5 6 7 8 9 10 162.550 162.400 162.475 162.425 162.450 162.500 162.525 161.650 161.775 163.275

* The term transceiver will be used to identify the main unit containing the LCD screen and controls. Radio will be used to identify the entire equipment including transceiver, microphone/speaker, antenna, and any attached external speakers. 26 English Nothing comes close to a Cobra 27 Mounting and Powering The Radio Installation and Start-Up Mounting and Powering The Radio Before using your CobraMarine VHF radio, it must be installed on your vessel. Installing Your Radio Choose a location for your radio where it will be conveniently accessible with the following factors in mind:

The leads to the battery and the antenna are best kept as short as possible. The antenna must be mounted at least three (3) feet from the transceiver. The radio and all speakers need to be far enough from any magnetic compass to avoid deviation due to the speaker magnet. There needs to be free air flow around the heat-sink fins on the back of the transceiver. Surface Mount A dash mounting kit is included with your CobraMarine VHF radio to allow its installation on or under the dash. Dash Mounting Kit Bracket Mount Above Or Below The Dash, A Shelf, Or On The Overhead:

1. Use the mounting bracket as a template to drill holes for the mounting screws. 2. Attach the mounting bracket to the chosen surface. 3. Attach the transceiver to the mounting bracket with the locking knobs. 4. Tilt the transceiver to a convenient angle and tighten the locking knobs. Installation and Start-Up Microphone Bracket Use Supplied Template Artwork to come. Insert Transceiver Attach Mounting Brackets Mounting and Powering The Radio Microphone Bracket To Install The Microphone Bracket:

1. Install the microphone bracket on a vertical surface near the transceiver using the supplied stainless steel screws. In-Dash Mount A flush mounting kit is included with your CobraMarine VHF radio to allow its installation in the dash. To Mount The Transceiver Flush In The Dash:

1. Use the supplied template to mark and cut an opening in the dash. CAUTION Before cutting, be sure the area behind the dash is clear of any instruments or wires that might be damaged in the process. 2. Insert the transceiver into the opening. 3. Attach the mounting brackets to the sides of the transceiver with the adjusting screw flanges facing the back of the dash. Adjust Screws 4. Tighten the adjusting screws against the back of the dash until the flange on the front of the transceiver is tight against the dash. Tilt Lock Knobs 28 English Nothing comes close to a Cobra 29 Installation and Start-Up Warning Sticker Rear View Mounting and Powering The Radio Warning Sticker FCC regulations require that the warning sticker supplied with this radio be applied to a spot where it is easily seen by the radio operator. Be sure the location is clean and dry before applying the sticker. Electrical Power Connection Your CobraMarine VHF radio is powered from the vessels 13.8-volt negative ground direct current electrical system (12 volt nominal). A fused power connection lead is provided at the back of the transceiver. To Attach An Electrical Power Connection:

1. Attach the black power wire to a negative ground. 2. Attach the fused red power wire to the positive side of the power system.

Black Cable Positive (+) Red Cable Negative () CAUTION A reverse polarity connection will damage the radio. Antenna Requirements and Attachment Installation and Start-Up Antenna Requirements and Attachment Antenna Requirements Your CobraMarine VHF radio requires an external marine antenna to send signals into the air and to receive them. The radio is arranged to use any of the popular marine VHF antennas, but it is up to you to choose which antenna to use. Since it represents the link between your radio and the outside world, Cobra suggests you purchase the best quality antenna, coaxial cable, and connectors you can. This is best accomplished with the advice and guidance of a knowledgeable dealer who can assess the variables involved with your particular boat and preferences. WARNING Compliance with FCC requirements for Radio Frequency Exposure is the responsibility of both the antenna installer and the radio operator. Safe Maximum Permissible Exposure (MPE) Radius To avoid health hazards from excessive exposure to RF energy, FCC OET Bulletin 65 establishes an MPE radius of 10' (3 m) for the maximum power of your radio with an antenna having a maximum power gain of 9 dBi. This means that all persons must be at least 10' (3 m) away from the antenna when the radio is transmitting. Installation Requirements A) An omnidirectional antenna with a gain not greater than 9 dBi must be mounted at least 16.4' (5 m) above the highest deck where people may be during radio transmissions, measured vertically from the lowest point of the antenna. This provides the minimum separation distance to comply with RF exposure requirements and is based on the MPE radius of 10' (3 m) plus the 6.6' (2 m) height of an adult. B) For vessels without structure to mount the antenna as described in A, it must be mounted as follows AND all persons must be outside the 10' (3 m) MPE radius during radio transmissions. The antenna must be mounted so that its lowest point is at least 3.3' (1 m) vertically above the heads of all persons during radio transmissions. 30 English Nothing comes close to a Cobra 31 Antenna Attachment and External Devices and Connections Installation and Start-Up External Devices and Connections Operating Your Radio Radio Operator Requirements Do not transmit when anyone is within the MPE radius of the antenna unless that person or persons are shielded from the antenna by a grounded metallic barrier. This is especially important on vessels with antennas mounted as described in B where no one may be within 9' (2.8 m) horizontally from the base of the antenna during transmissions. FAILURE TO OBSERVE THE ABOVE LIMITS MAY EXPOSE THOSE WITHIN THE MPE RADIUS TO RF ENERGY ABSORBTION IN EXCESS OF THE FCC MAXIMUM PERMISSIBLE EXPOSURE. IT IS THE RADIO OPERATORS RESPONSIBILITY TO INSURE THAT MPE LIMITS ARE HEEDED AND THAT NO ONE IS WITHIN THE MPE RADIUS DURING TRANSMISSIONS. Coaxial Cable Socket Antenna Lead Attachment Once the antenna is installed, the coaxial cable lead can be attached to the socket at the back of the transceiver. CAUTION Attempting to transmit without an antenna attached will damage your CobraMarine VHF radio. External Devices and Connections Your CobraMarine VHF radio is set up to connect auxiliary devices for navigation, convenience, and added versatility. As is the case with the antenna, choosing these devices is best done with the advice and guidance of a knowledgeable dealer. Standard connectors are provided on the front and back of the transceiver. Standard Connectors Antenna Microphone Attachment Power Connection Global Positioning System

(GPS) External Speaker Microphone/Speaker Attachment Connect the microphone to the cord socket located at the left side of the front of the transceiver. To Connect The Microphone/Speaker Attachment:

1. Align the connector and push it firmly into the socket. 2. Tighten the captive nut to hold the connector in place. 3. Slide the waterproof sleeve over the nut until it seats in the recess around the socket. Global Positioning System (GPS) Device (Not Included) Cobra strongly recommends that you obtain and connect a GPS device to your CobraMarine VHF radio. By having a GPS connected, your position will be continuously indicated on the LCD and, most importantly, it will be included automatically in any DSC distress message you may need to send. That will take the search out of search and rescue. To Install A GPS Device:

1. Install the GPS device in a convenient location according to its manufacturers directions. 2. Run the NMEA standardized output lead from the GPS to the back of the transceiver and connect it to the GPS interface cable on the transceiver. 32 English Nothing comes close to a Cobra 33 Operating Your Radio External Speaker PA Speaker External Devices and Connections External Speaker (Not Included) An external speaker can provide greater volume to hear messages than the speaker incorporated in the CobraMarine microphone/speaker. To Install An External Speaker:

1. Connect the speaker lead to the standard jack on the back of the transceiver. The speaker portion of the CobraMarine microphone/

speaker will be muted when an external speaker is connected. Public Address Speaker (Hailer)

(Not Included) At times, it may be handy to hail other boats or give instructions to line handlers on the dock. Your CobraMarine VHF radio can be switched to operate in the Public Address mode through an attached PA speaker. To Install A Public Address Speaker:

1. Connect the PA speaker lead to the standard jack on the back of the transceiver. Operating Your Radio Getting Started Getting Started Refer to the foldout on the front cover of this manual to identify the various controls and indicators on your radio. Throughout this manual you will be instructed to press or to press and hold buttons on the radio or on the microphone/speaker. Press means a momentary press, then release; press and hold means to hold the button down for three (3) seconds or more. Tones and Alarms When your CobraMarine VHF radio is On, you can expect to hear the following tones and alarms. The volume of these sounds is controlled by the circuitry in the radio and is not affected by the volume set with the On-Off Power/Volume knob. Confirmation Tone Single high-pitched beep confirms all button presses except the Talk button. It can be turned On or Off. See Set-up Routines on page 40. Error Tone Single low-pitched beep indicates an invalid button press. DSC Distress Alarm Loud, continuous, low-pitched series of closely spaced, three (3) beep groups. Press any button to turn it Off. This alarm sounds for:

Distress call send, receive, and acknowledgement Distress Relay call received All Ships call received NOTE This alarm sounds only for DSC Distress calls on Channel 70. It does not sound for Voice calls on Channel 16 you still must listen for those. 34 English Nothing comes close to a Cobra 35 Operating Your Radio Getting Started DSC Geographical Alarm Loud, continuous, medium-pitched, high-low tones (warble) sounds when a Geographical call is received. Press any button to turn it Off. DSC Position Request Alarm Medium-loud, continuous, low-pitched series of closely spaced, four (4) beeps [three (3) short one (1) long] groups sounds when a Position Request call is received. Press any button to turn it Off. DSC Individual Alarm Medium-loud, continuous, medium-pitched, two (2) beep groups sounds when an Individual call is received. Press any button to turn it Off. Weather Alarm Medium-loud, continuous, medium-pitched series of one-half (12) second beeps spaced one-half (12) second apart sounds when Weather Alert is turned On and NOAA sends a 1050 Hz weather alert tone on the selected weather channel. Press any button to turn it Off. Switch to the selected weather channel to hear the NOAA alert message. Operating Your Radio Getting Started Power On-Off Transceiver power can be turned On or Off by the On-Off Power/Volume knob on the transceiver or the Volume Up button on the microphone/speaker. On-Off Power/Volume Volume Down Button

Competitor Illustration G On-Off Power/Volume Squelch Knob Squelch Knob To Turn Your Radio On Or Off:

1. Press and hold the On-Off Power/Volume knob on the transceiver or the Volume Up button on the microphone/speaker. When the radio is powered On, the Confirmation Tone will sound and the LCD will show all segments for two (2) seconds. All buttons will be inoperative during these two

(2) seconds. After two (2) seconds, the radio will return to the settings in effect when it was last powered Off, the LCD will show the corresponding information, and all controls will be operative. The radio will then be in Standby mode. Volume The On-Off Power/Volume knob on the transceiver and the Volume Up/Down buttons on the microphone/speaker control the speaker volume. The volume adjustment applies only to what you hear from the speaker and does not affect the volume of your outgoing messages. That is controlled by the circuitry of your radio. To Increase The Volume You Can Choose One Of The Following:

a. Turn the On-Off Power/Volume knob clockwise. b. Press and release the Volume Up button on the microphone/speaker. To Decrease The Volume You Can Choose One Of The Following:

a. Turn the On-Off Power/Volume knob counter-clockwise. b. Press and release the Volume Down button on the microphone/speaker. When adjusting the volume while using the microphone/

speaker, press and hold the Volume Up or Volume Down buttons for rapid advance. 36 English Nothing comes close to a Cobra 37 Introduction Squelch Knob Turn Till Hissing Sound Turn Till Hissing Stops Lower Bearier Product Features Squelch Squelch control filters weak signals and radio frequency noise so that you can more clearly hear the signals you want. You can think of it as a variable barrier that blocks what you dont want to hear. To Squelch Your Radio:

1. With the Squelch knob turned fully counter-clockwise, turn the On-Off/Volume knob clockwise until you hear a hissing (noise) sound. NOTE The Volume Up/Down buttons on the microphone/

speaker cannot be used in the Squelch process. You must use the On-Off Power/Volume knob. 2. Turn the Squelch knob clockwise until the hissing sound stops. Turning the Squelch further clockwise (higher bearier) will filter weak and medium strength signals until only the strongest signal can get through at the highest Squelch setting. To Receive Weaker Signals:

1. Turn the Squelch knob counterclockwise (lower bearier). If the Squelch is set so that you can hear a continuous hissing sound, the Scan and Tri-Watch functions will be blocked. Introduction Product Features Standby and Receive Standby is the usual mode for the radio whenever it is turned On. Standby Mode From Standby Mode, You Can:

Change your radios settings using Set-Up Routines. Receive messages on the current channel as well as DSC messages. Receive NOAA alerts if Weather Alert mode is turned On. Switch to Transmit mode using the Talk button. NOTE Coast Guard alerts are broadcast on Channel 16 and DSC Channel 70. You need to monitor Channel 16 to hear the alerts, then switch to Channel 22 to hear those warnings. DSC warnings will sound the Geographical Call Alarm and automatically switch your radio to Channel 22 to hear the warning. While the radio is in Standby mode, the Receive mode is entered whenever a strong enough signal to break Squelch is sent to the radio. You will hear the message through whichever speakers are connected to the radio. Up/Down Buttons Channel 16/9 Button Weather/UIC Button To Change The Channel You Are Listening To, You Can Choose One Of The Following:

a. Press the Up/Down buttons. This will take you to the next higher or lower VHF channel. (When on Channel 88A, the next higher channel is Channel 1 and vice versa.) For rapid advance, press and hold the Up or Down button. (The Confirmation Tone will sound only for the button press, not during rapid advance.) b. Press the Channel 16/9 button. This will take you to Channel 16 with one press and to Channel 9 with a second press. Additional presses will toggle between Channels 16 and 9. Press and hold the Channel 16/9 button to return to Standby mode. c. Press the Weather/UIC button. This will toggle the radio between Standby and Weather Radio modes. When in Weather Radio mode, the Up/Down buttons will change the Weather Channel. 38 English Nothing comes close to a Cobra 39 Operating Your Radio Set-Up Routines Operating Your Radio Set-Up Routines Set-Up Routines Settings Menu The Settings menu in the CobraMarine VHF radio allows you to turn On and Off many of its features, to adjust other features to suit your preferences, and to enter your User MMSI number. Call/Set Button Settings Menu Up/Down Buttons Exit Menu To Enter The Settings Menu:

1. Press and hold the Call/Set button. The Settings menu will appear on the LCD. After entering the Settings menu, you can scroll through it to make as many entries as you like. Whenever the setting selection arrow appears in a feature portion of the menu, it will point to the setting that was in effect when you entered the menu. When you are finished with changes, you can exit the Settings menu and return to Standby mode. To Exit The Settings Menu:

1. Use the Up/Down buttons to scroll down to EXIT at the bottom of the menu. 2. With the arrow pointing to EXIT, press the Call/Set button to return the radio to Standby mode. NOTE Basic Set-Up routines are described here. For Set-Up routines that apply specifically to a particular function, they are included in the section for that function. LCD Backlight The LCD has a backlight lamp to make it visible in the dark. This lamp can be adjusted for brightness or turned Off. To Adjust The Backlight Level:

1. Enter the Settings menu and scroll to LAMP ADJ Lamp Adjustment

(Lamp Adjustment) with the Up/Down buttons. High Setting 2. Press the Call/Set button and observe the current backlight setting HIGH, MEDIUM, LOW or OFF. 3. Use the Up/Down buttons to switch to the setting you want. 4. Press the Call/Set button to select the backlight setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. When the backlight is turned On to any intensity, the lamp will be lit whenever the radio is On. LCD Contrast The LCD backlight will not be visible in daylight, but the LCD contrast can be adjusted to make it easier to read in different light conditions. Contrast Contrast Setting To Change The Contrast:

1. Enter the Settings menu and scroll to CONTRAST with the Up/Down buttons. 2. Press the Call/Set button and observe the current contrast setting a number between 01 and 07. 3. Use the Up/Down buttons to increment the number up or down. 4. Press the Call/Set button to select a contrast level. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. 40 English Nothing comes close to a Cobra 41 Operating Your Radio Set-Up Routines Operating Your Radio Set-Up Routines U.S.A./International/Canada Channel Maps Three (3) sets of VHF channels have been established for marine use in the U.S.A., Canada, and the rest of the world (International). Most of the channels are the same for all three (3) maps, but there are definite differences (see table on pages 14 through 23). Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose. To Set Your Radio For The Area In Which You Will Be Using It:

1. From Standby mode, press and hold the Weather/UIC button. The radio will shift one channel map and the Active Channel Map will show on the top line of the LCD. 2. Repeat step 1 to shift to the next channel map(s) in the sequence U.S.A., INTL (International), CAN

(Canada) then back to U.S.A. The radio will return to Standby mode each time the button is released. Weather/UIC Button Active Channel Map Please advise on screen illustration to pick up. Confirmation Tone The Confirmation Tone sounds when your CobraMarine VHF radio is turned On and to confirm all button presses except for the Talk button. If you would prefer not to hear the Confirmation Tone, you can turn it Off and On as you choose. Key Tone Tone Setting To Turn The Confirmation Tone On Or Off:

1. Enter the Settings menu and scroll to KEY TONE with the Up/Down buttons. 2. Press the Call/Set button and observe the current confirmation tone setting ON or OFF. 3. Use the Up/Down buttons to switch to the setting you want. 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. Time Offset All VHF, DSC, and GPS activities use a 24-hour clock and Universal Coordinated Time (UTC) which was formerly known as Greenwich Mean Time (GMT). For time inputs to be converted to local time, you need to enter the hour offset of your local time zone from Greenwich. (See Worldwide City Timezone Chart on pages 24 25.) Time Offset Set Time To Change The Time Offset:

1. Enter the Settings menu and scroll to TIME OFST

(Time Offset) with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting. 3. Use the Up/Down buttons to change to the setting for your local time zone. 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. NOTE If you leave the Time Offset at zero, the LCD will show the time as UTC. If you enter the hour offset for your time zone, the LCD will show the local time. In either event, DSC messages will always be based on UTC. 42 English Nothing comes close to a Cobra 43 Operating Your Radio Voice Transmission Operating Your Radio Voice Transmission Voice Transmission Voice Transmission Transmit mode gives you the ability to communicate with safety services, other vessels, and shore stations. When you use this capability, be sure to follow the procedures and to observe the courtesies that govern its use so everyone benefits.

(The tables on pages 14 through 23 will help you select the proper channels.) Before pressing the Talk button to transmit a message, you should select the appropriate channel and transmit power output. Channels You can transmit voice messages on most VHF channels. Refer to the VHF Marine Channel Assignments on pages 14 through 23 to select a channel according to the type of message you are going to send. Up/Down Buttons Channel 16/9 Button To Change The Channel You Can Choose From One Of The Following:

a. Press the Up/Down buttons. This will take you to the next higher or lower VHF channel. (When on Channel 88A, the next higher channel is Channel 1 and vice versa.) For rapid advance, press and hold the Up or Down buttons. (The Confirmation Tone will sound only for the button press, not during rapid advance.) b. Press the Channel 16/9 button. This will take you to Channel 16 with one (1) press and to Channel 9 with a second press. Additional presses will toggle between Channel 16 and Channel 9. Press and hold the Channel 16/9 button to return to Standby mode. Transmit Power Output Your radio can transmit selectively at one (1) or twenty-five (25) watts of power. Cobra suggests you maintain the low power setting for short-range communications and to avoid overpowering nearby stations with your signal. Use the high power setting for long-range communications or when you do not receive a response to a signal sent at one (1) watt. High/Low Power Button Low Power Please advise on screen illustration to pick up. Low Power Setting Please advise on screen illustration to pick up. 2 Inches From Mouth HDI needs to Illustrate with the 75 Microphone. Talk Button Transmit Mode Please advise on screen illustration to pick up. To Toggle Between The High And Low Power Modes:

1. Press the High/Low Power button. The LCD will show which mode is in effect. Some channels are restricted to use at a maximum of one (1) watt. Your radio will automatically set the power to Low Power mode when you select those channels. If, in an emergency, you need to increase the output power on these channels for your signal to be heard, you can override the Low Power mode by pressing and holding the High/Low Power button. Transmit A Message To Transmit A Message:

1. Check to see that your unit is set to a proper channel for the type of message you plan to send. 2. Toggle to the Low Power setting. 3. With the microphone about two (2) inches (5 cm) from your mouth, press and hold the Talk button and speak into the microphone. Transmit will be indicated on the LCD. 4. Release the Talk button when you are finished speaking. Your unit can only operate in either the Transmit or the Receive mode at any given time. You will not hear the response to your message unless the Talk button is released. NOTE If the Talk button is held down for five (5) minutes, the radio will automatically cease transmitting to prevent unwanted signal generation. As soon as the Talk button is released, it can be pressed again to resume transmission. 44 English Nothing comes close to a Cobra 45 Operating Your Radio Voice Transmission Public Address Another form of voice transmission is available on your radio. It can be used in PA (Public Address) mode to hail other vessels or people near the shore if you have mounted and connected an optional PA speaker. Settings Menu PA Mode Off Mode Talk Button To Switch The Radio From RF Transmit To PA Mode:

1. Enter the Settings menu and scroll to PA MODE with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting ON or OFF. 3. Use the Up/Down buttons to change to the setting. 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. To Broadcast On The PA Speaker:

1. Switch to the PA mode. 2. Press the Talk button and speak into the microphone. NOTE While in the PA mode:

When the Talk button is pressed, the output is directed to the PA speaker and not transmitted as a radio signal through the antenna. Received radio messages will be directed to the PA speaker unless the Talk button is pressed. Operating Your Radio Weather Radio and Alerts NOAA All Hazards/Weather Radio And Alerts NOAA broadcasts weather information as described in the NOAA Weather Channels section on page 26 of this manual. You can listen to these ten (10) Receive-only channels at any time. Weather/UIC Button Weather Mode Please advise on screen illustration to pick up. Up/Down Buttons NOTE Only one (1) or two (2) of the weather channels will be operating in any given location. You will need to select the channel with the strongest signal in your location. This is the channel the radio will scan for the Weather Alert Signal. To Listen To The Weather Channels:

1. From Standby mode, press the Weather/UIC button. The unit will enter the Weather mode and show it on the LCD. 2. Press the Up/Down buttons to change the weather channels hold the button for fast advance. 3. To exit the Weather mode and return to Standby mode, press the Weather/UIC button again. Weather Alert Set-Up You must have Weather Alert mode turned On to benefit from the Weather Alert Condition signal described in the NOAA Weather Channels Section on page 26. Settings Menu Weather Alert On Mode To Turn Weather Alert On:

1. Enter the Settings menu and scroll to WX ALERT

(Weather Alert) with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting ON or OFF. 3. Use the Up/Down buttons to change to the setting. 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. 46 English Nothing comes close to a Cobra 47 Weather Radio and Alerts and Advanced Operation Operating Your Radio Weather Alert Signal When NOAA broadcasts a weather alert signal and your radio is in the Weather Alert mode, you will hear a continuous audible tone. The alert indicators will sound regardless of what channel you are operating on as soon as a NOAA alert signal is received. When You Hear The Alert:

1. Press any key to turn Off the alert alarm and LCD indicator. 2. Switch to the weather channel you selected to hear the NOAA emergency broadcast. Advanced Operation Cobra has incorporated several features in your CobraMarine VHF radio to give you quick access to the voice calling channels and to let you monitor more than one channel at once. Channel 16/9 This function gives you quick access to calling Channel 16 and Channel 9 from any operational mode. Channel 16/9 Button Channel 16 Please advise on screen illustration to pick up. To Switch To Channel 16 Or Channel 9:

1. Press the Channel 16/9 button to change to Channel 16. 2. Press the Channel 16/9 button again to change to Channel 9. Additional presses of the Channel 16/9 button will toggle back and forth between the two channels. To exit the Channel 16/9 mode and return to the previous channel, press and hold the Channel 16/9 button. While at Channel 16 or Channel 9 in the Channel 16/9 mode, you can also press the Up/Down buttons to change to other channels. In that event, another press of the Channel 16/9 button will switch your radio to Channel 16 and the sequence will start over at step 1. Operating Your Radio Advanced Operation Tri-Watch Tri-Watch gives you one (1) button access to scan the three (3) locations of most importance to you. Channel 16 and Channel 9 will always be included as scanned locations. The remaining location will be the VHF channel in effect when you enter Tri-Watch mode. NOTE The radio must be Squelched for Tri-Watch to function. See page 36 for Squelch procedure.

Please advise on screen illustration to pick up. Up/Down Buttons Tri-Watch Button Tri-Watch Mode Please advise on screen illustration to pick up. To Enter Tri-Watch Mode:

1. In Standby mode, use the Up/Down buttons to go to the channel you want to add as the third location to be scanned. 2. Press the Tri-Watch button. Tri-Watch will be indicated on the LCD and the radio will scan among Channel 16, Channel 9, and the third Tri-Watch location you selected. A signal on any one (1) of the three (3) channels will stop the scan for ten (10) seconds to allow you to listen to the traffic on the channel. The channel number will be displayed on the LCD during the ten (10) seconds. To Exit Tri-Watch Mode:

1. Press the Tri-Watch button. The radio will return to Standby mode. During An Incoming Transmission, You Can Choose From The Following:

a. Press the Talk button to remain on that Tri-Watch location and return to Standby mode. b. Press the Up/Down buttons to resume scanning Tri-Watch locations. If you do not press any buttons within ten (10) seconds, your radio will automatically resume scanning Tri-Watch locations. 48 English Nothing comes close to a Cobra 49 Operating Your Radio Advanced Operation During Scanning (While Not Receiving A Transmission), You Can Choose From The Following:

a. Press the Talk button to communicate on the last Tri-Watch location scanned and return to Standby mode. b. Press the Up/Down buttons to change the scan direction. Scan Memory Scan mode is similar to the Tri-Watch mode except that it will scan as many channels as you choose. NOTE The radio must be Squelched for the Memory Scan mode to function. See page 36 for Squelch procedure. Memory Channels You can program (or tag) any or all channels to be scanned in the Memory Scan mode. These tagged channels can be scanned using Memory Scan mode. To Program Memory Channels:

1. Select a channel to be tagged using the Up/Down buttons. 2. Press and hold the Memory Scan/Memory Clear button for three (3) seconds. The channel will be tagged for scanning and MEM (Memory Channel) will appear next to the channel number on the LCD whenever that channel is selected. The radio will return to Standby mode as soon as the Memory Scan/Memory Clear button is released. Repeat steps 1 through 2 to tag as many more channels as you wish. Memory Channel Is Subhead appropriate?

Please advise on screen illustration to pick up. Up/Down Buttons Memory Scan/Clear Memory Channel Is Subhead appropriate?

Please advise on screen illustration to pick up. Operating Your Radio Up/Down Buttons Memory Scan/Clear Advanced Operation To Clear Memory Channels:

1. Select a channel to be cleared from a memory tagging using the Up/Down buttons. 2. Press and hold the Memory Scan/Memory Clear button for three (3) seconds. The channel will be untagged and MEM (Memory Channel) will no longer appear next to the channel number on the LCD whenever that channel is selected. The radio will return to Standby mode as soon as the Memory Scan/Memory Clear button is released. Repeat steps 1 through 2 to clear additional channels from memory locations. Memory Scan During Memory Scan, the radio will rapidly switch from tagged channel to tagged channel. Whenever any activity is detected, the radio will stop the scan for ten (10) seconds to allow you to listen briefly on that channel. It will then continue to scan unless you switch out of the Scan mode. NOTE If there are fewer than two (2) channels tagged, the Memory Scan mode will not be available. [See To Program Memory Channels to tag at least two (2) channels.]

Memory Scan/Clear Memory Scan Mode Please advise on screen illustration to pick up. To Enter Memory Scan:

1. From Standby mode, press the Memory Scan/

Memory Clear button. The radio will immediately begin to scan the channels you tagged. MEM SCAN (Memory Scan) will show on the LCD. To Exit Memory Scan:

1. From Memory Scan mode, press the Memory Scan/Memory Clear button. 2. This will return the radio to Standby mode on the last scanned memory location. 50 English Nothing comes close to a Cobra 51 Advanced Operation and DSC Set-Up Operating Your Radio During An Incoming Transmission, You Can Choose From The Following:

a. Press the Talk button to remain on that memory location and end scanning. This will return the radio to Standby mode. b. Press the Up/Down buttons to resume scanning memory locations. If you do not press any buttons within ten (10) seconds, your radio will automatically resume scanning memory locations. During Scanning (While Not Receiving A Transmission), You Can Choose From The Following:

a. Press the Talk button to communicate on the last memory location scanned and return to Standby mode. b. Press the Up/Down buttons to change scan direction. DSC Set-Up Digital Selective Calling DSC employs digital RF signals which tend to carry further and be less susceptible to distortion from noise and atmospheric conditions than analog ones. The result is greater range and more reliable message delivery per watt of output power. But, that is not the only advantage of DSC equipped radios. Those radios are set up to interface with GPS and to automate many of the operations involved in sending and receiving messages. That results in more compact and accurate messages and less congestion of the airwaves. The price of these benefits to the user is the time it takes to do the set-up needed to make the DSC features work. A little time spent when your radio is new will pay dividends over its life. These procedures use the Settings menu. Refer to page 38 for information on entering and exiting the Settings menu. Operating Your Radio DSC Set-Up User MMSI Number This nine (9) digit number is similar to a telephone number in that it is a unique identifier for you and your vessel. DSC uses this number in every message it sends and receives. That is why your radio will not operate in the DSC mode until you enter your MMSI number. You should enter it as soon as you receive it from one of the issuing agencies listed on page 9. Settings Menu Scroll User MMSI ID Entry Error Message Call/Set Button To Enter Your MMSI Number:

1. Enter the Settings menu and scroll to USER MMSI with the Up/Down buttons. 2. Press the Call/Set button and the blinking cursor will appear at the first digit under USER MMSI ID ENTRY. 3. Use the Up/Down buttons to scroll through the number list to that digit of your number. 4. Press the Call/Set button to select the digit and the blinking cursor will move to the next digit of the number. 5. Repeat steps 3 and 4 until all nine (9) digits of your MMSI number are entered. 6. Check that you have entered the number correctly. 7. Press and hold the Call/Set button to return to the Settings menu. If You Incorrectly Enter Your MMSI Number You can repeat steps 1 through 7 to correct it. HOWEVER, YOU CAN DO THIS ONLY ONCE! A third attempt to enter an MMSI number will result in an error message as shown. Pressing the Call/Set button from the error message will return the radio to the Settings menu. Once the error message appears, the radio will still operate in all non-DSC modes. But you will have to return it to Cobra Electronics (see Product Service on page 77 for details) for reset before you can enter your MMSI number and use the radio in DSC mode. 52 English Nothing comes close to a Cobra 53 Operating Your Radio DSC Set-Up Operating Your Radio DSC Set-Up Because the MMSI number is so important to DSC operation, this limitation is imposed on all DSC capable radios to prevent constant changes and the potential introduction of errors in the process. If, for any reason, it is necessary to change the MMSI number in the radio more than once, you can return it to Cobra Electronics for reset. Settings Menu Scroll User MMSI ID Entry Settings Menu DSC Scan On Mode If You Transfer Your Radio To A Different Vessel Contact the MMSI issuing agency from which you obtained your number and change the information associated with your number to correspond to vessel in which it will be mounted. To View Your MMSI Number At Any Time:

1. Enter the Settings menu and scroll to USER MMSI with the Up/Down buttons. 2. Press the Call/Set button and the blinking cursor will appear at the first digit of your already entered number under USER MMSI ID ENTRY. 3. Press and hold the Call/Set button to return to the Settings menu. DSC Scanning If you choose not to have your radio scan Channel 70, you can turn DSC scanning Off. If you do so, you can still send DSC messages, but will not hear DSC alarms nor receive DSC messages except when you are tuned to Channel 70 or you have sent a Distress message. The acknowledgement to the Distress message will be received whether DSC Scanning is On or Off. To Turn DSC Scanning On Or Off:

1. Enter the Settings menu and scroll to DSC SCAN with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting ON or OFF. 3. Use the Up/Down buttons to select the setting that you want. Group MMSI Number Nautical organizations such as yacht clubs and the organizers of events such as regattas can establish group MMSIs. These allow a message to be sent automatically to all members of the group without having to call each one individually. Each member of the group must enter the group MMSI number in his radio in order to receive group messages. Settings Menu Group MMSI Group MMSI ID Entry To Enter A Group MMSI Number:

1. Enter the Settings menu and scroll to GROUP MMSI with the Up/Down buttons. 2. Press the Call/Set button and the blinking cursor will appear at the first digit under GROUP MMSI ID ENTRY. 3. Use the Up/Down buttons to scroll through the number list to that digit of your number. 4. Press the Call/Set button to select the digit and the blinking cursor will move to the next digit of the number. 5. Repeat steps 3 and 4 until all nine (9) digits of the group MMSI number are entered. 6. Check that you have entered the number correctly. 7. Press and hold the Call/Set button to return to the Settings menu. The group MMSI is established by modifying the MMSI assigned to one (1) of the group members. The last digit of that members MMSI number is dropped and a zero (0) is inserted at the beginning. For example, member MMSI number 366123456 becomes group MMSI number 036612345. Group MMSIs can be entered and changed any number of times without encountering the need to have your radio reset. 4. Press the Call/Set button to return to the Settings menu. 54 English Nothing comes close to a Cobra 55 Operating Your Radio DSC Set-Up Operating Your Radio DSC Set-Up 56 English Nothing comes close to a Cobra 57 Operating Your Radio DSC Set-Up Reply Type The ability to send your position to another station is an added feature of DSC radios that have GPS attached. It is handy for rendezvous and rescue situations. Your CobraMarine VHF radio allows you to choose whether to have the radio automatically respond to all position requests it receives or to alert you to a position request and allow you to choose whether to respond or not manual reply. To Set The Position Request Reply Type:

1. Enter the Settings menu and scroll to POS RPLY

(Position Reply) with the Up/Down buttons. 2. Press the Call/Set button and observe the current setting AUTO or MANUAL. 3. Use the Up/Down buttons to change the setting. 4. Press the Call/Set button to select the setting. 5. Use the Up/Down buttons to scroll to EXIT. 6. Press the Call/Set button to return to the Settings menu. Individual Directory DSC calling allows you to call another vessel or station directly if you know its MMSI number. Your CobraMarine VHF radio allows you to store up to ten (10) names and their associated MMSI numbers for quick access. To Enter Or Edit Names And MMSI Numbers In The Directory:

1. Enter the Settings menu and scroll to INDV DIR with the Up/Down buttons. 2. Press the Call/Set button to enter a memory location (01-10). 3. Use the Up/Down buttons to scroll through the memory locations to one you want to select. Settings Menu Position Reply Auto Mode Settings Menu Individual Directory Location Operating Your Radio Name Number List Next DSC Set-Up 4. Press and hold the Call/Set button to select the memory location. The cursor will begin to blink at the first character under NAME. 5. Use the Up/Down buttons to scroll through the character list. 6. Press the Call/Set button to select a character. This will also move the blinking cursor to the next character under NAME. 7. Repeat steps 5 and 6 to enter additional characters up to a maximum of nine (9) for the name. 8. After entering the name, press and hold the Call/Set button to move the blinking cursor to the first character under MMSI. 9. Use the Up/Down buttons to scroll through the number list. 10. Press the Call/Set button to select the number and move the cursor to the next character under MMSI. 11. Repeat steps 9 and 10 until the nine (9) digit MMSI is entered. 12. Press and hold the Call/Set button to move to the next memory location or exit. 13. Select NEXT or EXIT with the Call/Set buttons. If NEXT is selected, pressing the Call/Set button will move to the next memory location where another name can be entered by repeating steps 3 through 11. If EXIT is selected, pressing the Call/Set button will return you to the Settings menu. You can enter a total of ten (10) names and MMSI numbers in the directory. 58 English Nothing comes close to a Cobra 59 Operating Your Radio DSC Operation DSC Operation Sending DSC calls is done from menus similar to the Settings menu. Whereas entering the Settings menu required a press and hold of the Call/Set button, the sending menus appear with a press of the Call/Set or Distress buttons. All received DSC calls will sound one or another of the alarms to alert you to them. See page 34 for descriptions of the different alarms. Pressing any button will turn Off the alarm while maintaining the received call information on the LCD. Sending Distress Calls The ability to send and receive Distress calls and their acknowledgements on Channel 70 can literally be a lifesaver for you or another mariner. NOTE The DSC call will:

Sound the Distress alarm at all receiving stations. Inform receiving stations of your identity (MMSI). Inform receiving stations of your position if you have a GPS device connected or you have manually entered your position. It will not provide the receiving stations with other Distress information such as the nature of your problem, number of persons aboard, injuries, or the like. For that, you will have to communicate by voice on Channel 16 with the station that acknowledges your DSC Distress call. Distress Button Sending a Distress Call To Begin Sending A DSC Distress Call:

1. From Standby, lift the spring-loaded red door on the transceiver and press the red button under it. This will open the Distress menu with the arrow pointing to SEND. You will have three (3) choices:

Send the Distress call automatically with either no position information if a GPS is not connected or with the position provided by a connected GPS. Manually enter your position, then send the Distress call. Abort the Distress call process and return to Standby mode. Operating Your Radio Distress or Call/Set DSC Operation 2. Choose one (1) of the following:

a. To Send An Automatic Distress Call:

1). Press and hold either the Distress button or the Call/Set button. Manual b. To Send A Manual Distress Call:

1). Use the Up/Down buttons to move the arrow 2). Press the Call/Set button to go to the Position to MANUAL. Entry screen. Position Entry Screen MMSI Number EXIT Screen Distress Waiting MMSI Number 3). Use the Up/Down buttons to manually set the position of your vessel. 4). Press the Call/Set button to send the message. 5). Press and hold either the Distress button or the Call/Set button. c. To Abort The Distress Call Process:

If you pressed the Distress button by mistake or if you have not received an acknowledgement and want to discontinue the automatic resending of your Distress message:

1). Use the Up/Down buttons to move the arrow to EXIT. 2). Press the Call/Set button to return to Standby. The Distress Alarm will sound to let you know that the message is being sent. At the end of the transmission, the radio will maintain a watch on Channels 16 and Channel 70 for an acknowledgement. Press any button to turn Off the alarm and return to Standby mode. If an acknowledgement is received, the Distress Alarm will sound again and the responding partys MMSI number will show on the LCD. If no acknowledgement is received, the radio will resend the message at approximately four (4) minute intervals until an acknowledgement is received or you abort the Distress call. 60 English Nothing comes close to a Cobra 61 Operating Your Radio All Ship Urgency Urgency Waiting Routine Waiting Operating Your Radio DSC Operation Receiving Distress Calls If your vessel is within range of a DSC Distress call, the radio will receive the call, sound the Distress alarm, and switch to Channel 16. Distress Info on LCD When A Distress Call Is Heard:

1. Press any button to turn Off the alarm. 2. Read and write down the Distress information on the LCD (there may or may not be position data shown), then determine whether you should answer the call. 3. Press one (1) of the following three (3) buttons to switch from Distress Call Receive to Standby mode:

Call/Set button, Channel 16/9 button, or Talk button. 4. Respond, if appropriate, by pressing and holding the Talk button to transmit on Channel 16. NOTE Your radio will automatically switch to Channel 16 upon receiving a DSC Distress call. Sending Distress Relay Calls Your radio cannot send Distress Relay calls. Only large ships and shore stations with specially equipped radios can send these calls. Receiving Distress Relay Calls Your radio will respond to a received Distress Relay call in the same way as it will to a Distress call. Sending An All Ships Calls A DSC All Ships call is used for the same urgency and safety purposes as the Pan and Securite voice calls as well as to send routine messages to all stations at once. It will reach all stations within range of your radio. If you have an urgent, but not life-threatening, situation or a safety warning to broadcast to all vessels in your area, this is the type of call to use. It should be used judiciously for routine calls. DSC Operation To Send An All Ships Call:

1. In Standby select a channel on which you want to communicate for a routine call. (The radio will use Channel 16 for urgent and safety calls.) 2. Press the Call/Set button to enter the Call Send menu. 3. Use the Up/Down buttons to scroll to ALL SHIPS. 4. Press the Call/Set button to move to the message type menu. 5. Use the Up/Down buttons to select a message type or EXIT. 6. Press the Call/Set button to send the message or return to Standby if EXIT was chosen. 7. Depending on the type of message you chose, the radio will automatically switch to a voice channel. a. After URGENT and SAFETY calls, the radio will switch to Channel 16 and wait for you to press the Talk button to send the urgent or safety message by voice. b. After a ROUTINE call, the radio will switch to the channel you selected in step 1 and wait for you to press the Talk button to send the routine message by voice. DSC equipped radios that receive your message will be automatically switched to Channel 16 or the channel you selected to hear your voice message. 62 English Nothing comes close to a Cobra 63 Operating Your Radio DSC Operation Receiving An All Ships Call All Ships calls sent by stations within range of your radio will sound the Distress alarm on your radio and switch your radio to Channel 16. MMSI Number When An All Ships Call Is Heard:

1. Press any button to turn Off the alarm. 2. Read and write down the MMSI of the vessel sending the call as well as the date and time of the call in case you will want to respond. 3. Listen to the voice message sent on the channel your radio was switched to by the incoming All Ships call. 4. Press one of the following three (3) buttons to switch from All Ships Call Receive to Standby mode:

Call/Set button, Channel 16/9 button, or Talk button. Sending A Geographical Call Your radio cannot send Geographical calls. Only large ships and shore stations with specially equipped radios can send these calls. Receiving A Geographical Call Geographical calls are sent by specially equipped radios to all stations in a particular geographical area to alert only those stations of the call and not stations in unaffected areas. If you are in an area to which a Geographical call is made, it will sound the Geographical alarm on your radio and switch your radio to the channel chosen by the sending station. Geographical Call When A Geographical Call Is Heard:

1. Press any button to turn Off the alarm. 2. Read and write down the MMSI of the vessel sending the call as well as the date and time of the call in case you will want to respond. 3. Listen to the voice message sent on the channel your radio was switched to by the incoming Geographical call. 4. Press one of the following three (3) buttons to switch from Geographical Call Receive to Standby mode:

Call/Set button, Channel 16/9 button, or Talk button. Operating Your Radio DSC Operation Sending An Individual Call The DSC Individual call feature allows you to notify one (1), and only one (1), station that you want to communicate with that station. It does not alert all other stations within range that you will be sending a message as a voice call on Channel 16 or Channel 9 would. Call Send Menu

Select Name Restart the Individual Call To Send An Individual Call:

1. In Standby select a channel on which you want to communicate. 2. Press the Call/Set button to enter the Call Send menu. 3. Use the Up/Down buttons to scroll to INDIVIDUAL. 4. Press the Call/Set button to move to the individual directory. 5. Use the Up/Down buttons to select the name you want to call from the directory. 6. Press the Call/Set button to send the message or return to Standby if EXIT was chosen. If the radio you are calling sends back an automatic DSC response of able to comply, both your radio and the called radio will be switched to the channel you selected in step 1 and the Individual alarm will sound on both radios. Wait for a voice message from the called station. If the called radio does not send the able to comply response as at step 7, your radio will wait eight (8) seconds and resend the message. If an unable to comply response or no reply is received, your radio will go to the NO REPLY menu. At the NO REPLY menu, you can choose SEND or EXIT with the Up/Down buttons. If you choose SEND, your radio will restart the Individual call. If you choose EXIT you will be returned to the INDIVIDUAL location on the Call Send menu. 64 English Nothing comes close to a Cobra 65 Operating Your Radio Caller Identified Call Send Menu SEND Menu/Exit Group High DSC Operation Receiving An Individual Call When another station makes an Individual call to your radio, the Individual alarm will sound, the caller will be identified on the LCD, and your radio will be switched to the channel selected by the caller. Press any button to turn Off the alarm. To Receive An Individual Call:

1. Press the Talk button and greet the caller almost as if you were answering the telephone. Sending A Group Call Sending a group call is very similar to sending an Individual call, except that the Group MMSI is used and the resend and DSC responses do not apply. To Send A Group Call:

1. In Standby select a channel on which you want to communicate. 2. Press the Call/Set button to enter the Call Send menu. 3. Use the Up/Down buttons to scroll to GROUP. 4. Press the Call/Set button to move to the SEND or EXIT menu. 5. Use the Up/Down buttons to select SEND or EXIT. 6. Press the Call/Set button to send the message or return to the Call Send menu if EXIT was chosen. All radios will be switched to the channel selected in step 1. Press and hold the Talk button to send your voice message to everyone in the group. Anyone in the group can now also transmit on that channel. Press the Call/Set button and an Up/Down button simultaneously to exit from the channel selected for the Group call. Operating Your Radio Caller Identified Please advise on screen illustration to pick up. Position Request Individual Directory Call Send Menu DSC Operation Receiving A Group Call When another station makes a Group call to your radio, the Individual alarm will sound, the caller will be identified on the LCD, and your radio will be switched to the channel selected by the caller, just as for an Individual call. Press any button to turn Off the alarm. To Receive A Group Call:

1. Listen for the Group voice message. 2. Press the Talk button and respond only if appropriate. Sending A Position Request Position Request mode enables a DSC radio to obtain the position (latitude and longitude) of a station that has a GPS device connected to the DSC radio at that station. To Request The Position Of Another Station:

1. From Standby press the Call/Set button to enter the Call Send menu. 2. Use the Up/Down buttons to scroll to POS REQST (Position Request) on the menu. 3. Press the Call/Set button to enter the Individual Directory menu. 4. Use the Up/Down buttons to scroll to the name of the station whose position you want to request. 66 English Nothing comes close to a Cobra 67 Operating Your Radio DSC Operation 5. Press the Call/Set button. Receiving a Position Your radio will send the position request and there will be one (1) of three (3) possible responses:

You will receive the position. You will receive NO POSITION DATA, meaning the station you queried is not connected to a GPS device and cannot send its position. You will receive NO REPLY, meaning the operator of that station has chosen not to reply to your request. No Position Data 6. Choose one (1) of the following:

a. If You Receive A Position:

The requested position with the station name and MMSI will show on your screen. 1). Press the Call/Set button to return to Standby mode after you have noted the stations position. b. If The Station You Called Cannot Send Its Position:

NO POSITION DATA will show on your screen. 1). Press the Call/Set button to return to the Individual Directory menu. 2). Use the Up/Down buttons to scroll to EXIT. 3). Press the Call/Set button to return to the Call Send menu. 4). Use the Up/Down buttons to scroll to EXIT. 5). Press the Call/Set button to return to Standby. Operating Your Radio DSC Operation Resend The Request c. If The Station You Called Chose Not To Reply:

NO REPLY will show on your screen. You will have two choices:

RESEND the request. EXIT the Position Request mode. a. To Resend Your Position Request:

1). Use the Up/Down buttons to scroll to RESEND. 2). Press the Call/Set button. b. To Exit The Position Request Mode:

1). Use the Up/Down buttons to scroll to EXIT. 2). Press the Call/Set button to return to the Individual Directory menu. 3). Use the Up/Down buttons to scroll to EXIT. 4). Press the Call/Set button to return to the Call Send menu. 5). Use the Up/Down buttons to scroll to EXIT. 6). Press the Call/Set button to return to Standby. 68 English Nothing comes close to a Cobra 69 Operating Your Radio DSC Operation Operating Your Radio DSC Operation Receiving A Position Request When you went through the DSC Set-Up process, you set a Position Request Reply Type. (See page 58 to change your setting.) Depending on the setting you chose, when a Position Request message is received, your radio will enter either:

The Auto Reply mode. The Manual Reply mode. Requesting Station Reply Station Requesting Station When The Radio Is In Auto Reply Mode:

A Position Request will sound the Position Request alarm and show the name of the requesting station on the LCD. Your radio will automatically respond. It will send your position, if you have a GPS connected to your radio or NO POSITION DATA, if you do not have a GPS device connected. 1. Press any button to silence the alarm and exit the display. When The Radio Is In The Manual Reply Mode:

A Position Request message will sound the Position Request alarm and show the name of the requesting station. You can choose to:

Reply and send your position. Exit without sending your position. a. If You Choose To Reply With Your Position:

1). Use the Up/Down buttons to select SEND. 2). Press the Call/Set button to send your position. 3). Press any button to return to Standby. b. If You Choose Not To Reply:

1). Use the Up/Down buttons to select EXIT. 2). Press the Call/Set button to return to Standby without sending your position. Sending A Position Send Position Send uses your connected GPS in similar fashion to the Position Request function, except that you initiate the activity to let another station know where you are. Enter Call Send Menu Scroll to POS SEND Individual Directory Position Send Exit To Send A Position Send Message:

1. Press the Call/Set button to enter the Call Send menu. 2. Use the Up/Down buttons to scroll to POS SEND

(Position Send). 3. Press the Call/Set button to enter the Individual Directory. 4. Use the Up/Down buttons to select the station to which you want to send your position. 5. Press the Call/Set button to send your position. After your position is sent, the LCD will show POS SEND. You will have two (2) choices. Resend your position to the same station. Exit from Position Send mode. a. To Resend Your Position:

1). Use the Up/Down buttons to select SEND. 2). Press the Call/Set button to resend your position. b. To Exit From The Position Send Mode:

1). Use the Up/Down buttons to select EXIT. 2). Press the Call/Set button to return to the Call Send menu. 70 English Nothing comes close to a Cobra 71 Operating Your Radio Name and Position Please advise on screen illustration to pick up. DSC Operation Receiving A Position Send When another station sends you its position in Position Send mode, the Individual alarm will sound and the stations name and position will be shown on the LCD. Press any button to turn Off the alarm and return to Standby mode. Standby Signal If you will be away from your radio or otherwise unable to answer calls, you can put the radio into DSC Standby mode. When in DSC Standby mode, your radio will log all calls received into its Call Waiting memory and respond automatically to Individual calls with an UNATTENDED message. You will then be able to retrieve those calls from the Call Waiting memory. NOTE The Call Waiting memory can retain up to twenty (20) calls. See the following section for information on Call Waiting. To Enter Standby Mode:

1. From Standby press the Call/Set button to enter the Call Send menu. 2. Use the Up/Down buttons to select STANDBY. 3. Press the Call/Set button to enter DSC Standby mode. The radio will then remain in DSC Standby mode until you exit from that mode. To Exit DSC Standby Mode:

1. From DSC Standby mode, press the Call/Set button to return the radio to Standby mode. DSC Standby Mode Standby Mode Call/Set Button Up/Down Buttons Operating Your Radio DSC Operation Call Waiting Call Waiting functions similarly to the Caller ID function on your telephone. It will capture the callers MMSI identification number and any other data included in a DSC message. NOTE The Call Waiting memory can hold up to twenty (20) messages. Once the memory becomes full, each new call will erase the oldest call information on a first-in-first-out basis. Reviewing Messages To Enter Call Waiting And Review Messages Received While In DSC Standby:

1. From Standby mode, press the Call/Set button to enter the Call Send menu. 2. Use the Up/Down buttons to scroll to CALL WAIT (Call Waiting). 3. Press the Call/Set button to enter the Call Waiting mode. The first message will appear on the LCD and the third line will show the type of message INDIVIDUAL or DISTRESS. To Scroll Through All Of The Messages:

1. Use the Up/Down buttons to move from message to message in the Call Waiting memory. To Clear Messages From The Call Waiting Memory:

1. Use the Up/Down buttons to select the message you want to delete. 2. Press and hold the Memory Scan/Memory Clear button for one (1) second or more. The selected message will be deleted and the next message in the memory will show on the LCD. You can delete each message in turn by repeating steps 1 and 2. To Exit The Call Waiting Mode:

Press the Call/Set button to return to Standby mode. Standby Mode Call Waiting Up/Down Buttons Call/Set Button Memory Scan/Clear 72 English Nothing comes close to a Cobra 73 Maintenance and Troubleshooting Operating Your Radio Maintenance Very little maintenance is required to keep your CobraMarine VHF radio in good operating condition. Keep the radio clean by wiping with a soft cloth and mild detergent. Rinse with fresh water. Do not use solvents or harsh or abrasive cleaners, which could damage the case or scratch the LCD screen. If the radio is exposed to salt water, rinse it in fresh water at least once a day to prevent build-up of salt deposits, which could interfere with button operation. Troubleshooting Problem No display on LCD when radio is turned On Possible Cause(s) Improper power connection Solution(s) Insure power connections are proper and secure Will transmit at one (1) watt, but not at five (5) watts Will not transmit No sound from speaker No answer to calls Selected channel is limited to one (1) watt Switch to another channel Selected channel is limited to receive only Switch to another channel Volume level is too low or Squelch level is too deep Readjust Volume and Squelch Out of range of other station Signal is blocked by terrain Switch to twenty-five (25) watts or move closer Move until you have a line-of-sight to the other station Enter your MMSI number DSC Distress cannot be sent MMSI

(DSC self-identification) number is not entered Specifications Operating Your Radio Specifications General Frequency Range: TX Frequency Range: RX Number of Channels Channel Spacing Modulation Input Voltage Current Drain:

Stand-by Receive Transmit Temperature Range Unit Dimensions Unit Weight (Lbs) Receiver Frequency Range Receiver Type Sensitivity:

20 dB Quieting 12 dB Sinad Adjacent Channel Selectivity Intermodulation and Rejection Spurious and Image Rejection AF Output Transmitter Frequency Range: TX RF Output Power Spurious Emissions Microphone Type Frequency Stability FM Hum and Noise 156.025 to 157.425 MHz 156.050 to 163.275 MHz All U.S.A., Canadian, and International 10 NOAA Weather Channels 25 kHz 5 kHz Max. 13.8 VDC 20 mA 200 mA 5A @ High power 1A @ Low

-20 C to 60 C 6.25" x 2.25" x 7.125"

(15.9 cm x 5.7 cm x 18 cm) 2.0 156.050 to 163.275 MHz Double Conversion Superheterodyne 0.35 uV 0.30 uV

-60 dB

-60 dB

-60 dB 4 Watts @ 8 Ohms 156.025 to 157.425 MHz 1 and 25 Watts

-60 dB High -55 dB Low Dynamic

+/-5 ppm

-45 dB 74 English Nothing comes close to a Cobra 75 Warranty Warranty Limited 3-Year Warranty Customer Service Product Service Product Service For Products Purchased In the U.S.A. Cobra Electronics Corporation warrants that its CobraMarine VHF radio, and the component parts thereof, will be free of defects in workmanship and materials for a period of three (3) years from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. Cobra will, without charge, repair or replace, at its option, defective radios, products or component parts upon delivery to the Cobra Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobras expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. Exclusions: This limited warranty does not apply:

1. To any product damaged by accident;

2. In the event of misuse or abuse of the product or as a result of unauthorized alterations or repairs;

3. If the serial number has been altered, defaced, or removed;

4. If the owner of the product resides outside the U.S.A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. For Products Purchased Outside the U.S.A. Please contact your local dealer for warranty information. If you have any questions about operation or installing your new CobraMarine VHF product, or if you are missing parts Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!

See customer assistance on page A1. If your product should require factory service, please call Cobra first before sending your radio. This will ensure the fastest turn-around time on your repair. You may be asked to send your radio to the Cobra factory. It will be necessary to furnish the following to have the product serviced and returned:

1. For Warranty Repair include some form of proof-of-purchase, such as a mechanical reproduction or carbon of a sales receipt. If you send the original receipt, it cannot be returned;

2. Send the entire product;

3. Enclose a description of what is happening with the radio. Include a typed or clearly printed name and address of where the radio is to be returned;

4. Pack radio securely to prevent damage in transit. If possible, use the original packing material;

5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or Priority Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois 60707 U.S.A.;

6. If the radio is in warranty, upon receipt of your radio it will either be repaired or exchanged depending on the model. Please allow approximately 3 4 weeks before contacting Cobra for status. If the radio is out of warranty, a letter will automatically be sent informing you of the repair charge or replacement charge. If you have any questions, please call 773-889-3087 for assistance. 76 English Nothing comes close to a Cobra 77 Optional Accessories and Order Form State/Province Zip Country Customer Service Name Address (No P.O. Boxes) City Telephone Credit Card Number Type: Visa Mastercard Discover Exp. Date Customer Signature Amount Shipping/Handling*

$10.00 or less . $3.00

$10.01-$25.00 . $5.50

$25.01-$50.00 . $7.50

$50.01-$90.00 . $10.50

$90.01-$130.00 . $13.50

$130.01-$200.00 . $16.50

$200.01 plus . 10% off purchase

*For AK, HI and PR add additional $26.95 for FedEx Next Day or $10.95 for FedEx 2nd Day. Excludes weekend and holiday shipments. Please allow 2-3 weeks for delivery in the U.S. Prices subject to change without notice. The Cobra line of quality products includes:

CB Radios microTALK Radios Radar/Laser Detectors Safety Alert Traffic Warning Systems Accessories GPS (Global Positioning System) HighGear Accessories VHF Marine Radios Power Inverters 78 English Item #

U.S. Cost Each Qty Amount Tax Table Ohio, Wisconsin add 5%

Indiana, Michigan add 6%

California add 7.25%

Illinois add 8.75%

U.S. Subtotal

(Tax if Applicable) Shipping/Handling Total Optional Accessories You can find quality Cobra products and accessories at your local Cobra dealer, or in the U.S.A., you can order directly from Cobra. Ordering From U.S.A. Call 773-889-3087 for pricing or visit www.cobra.com. For credit card orders, complete and return this order form to fax number 773-622-2269. Or call 773-889-3087

(Press 1 from the main menu) 8:00 a.m. to 6:00 p.m. CT, Monday through Friday. Make check or money order payable to:

Cobra Electronics, Attn: Accessories Dept. 6500 West Cortland Street, Chicago, IL 60707 U.S.A. To order online, please visit our website: www.cobra.com