all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 4.06 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | July 05 2013 | ||||||
1 2 | RF Exposure Info | July 05 2013 | ||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | Test Setup Photos |
1 2 | User Manual | Users Manual | 4.06 MiB |
MRHH500_ENG_CVR_vA_F_v8_MR HH 330 Cover 1/18/13 3:14 PM Page 1 Our Thanks to You and Customer Assistance Introduction Radio Controls and Indicators Introduction Our Thanks to You Owners Manual Thank you for purchasing a CobraMarine VHF radio. Properly used, this Cobra product will give you many years of reliable service. How Your CobraMarine VHF Radio Works This radio is a battery-powered portable transceiver for use afloat. It gives you two-way vessel-to-vessel and vessel-to-shore station communications, primarily for safety and secondarily for navigation and operational purposes. With it, you can call for help, get information from other boaters, talk to lock or bridge tenders, and make radiotelephone calls to anywhere in the world through a marine operator. Besides two-way communications, the radio can provide quick access to receive all the NOAA (National Oceanographic and Atmospheric Administration) weather channels and alert you to weather emergencies with a tone on a weather channel you can select for your area. Customer Assistance Customer Assistance Should you encounter any problems with this product, or not understand its many features, please refer to this owners manual. If you require further assistance after reading this manual, Cobra Electronics offers the following customer assistance services:
For Assistance in the U.S.A. Automated Help Desk English only. 24 hours a day, 7 days a week 773-889-3087 (phone). Customer Assistance Operators English and Spanish. 8:00 a.m. to 5:30 p.m. Central Time Mon. through Fri. (except holidays) 773-889-3087 (phone). Questions English and Spanish. Faxes can be received at 773-622-2269 (fax). Technical Assistance English only. www.cobra.com (on-line: Frequently Asked Questions). English and Spanish. productinfo@cobra.com (e-mail). For Assistance Outside the U.S.A. Contact Your Local Dealer 2012 Cobra Electronics Corporation 6500 West Cortland Street Chicago, Illinois 60707 USA www.cobra.com A n o s r e V i P
-
5 4 8
-
0 8 4
. o N t r a P a n h C n i i d e t n i r P VHF MARINE RADIOMR HH500 FLT Nothing Comes Close to a Cobra English A1 English Belt Clip Battery Battery Door Screw Speaker/
Microphone External Cover ON/OFF/
Volume Control Bluetooth Microphone Channel Up Button ROG VHF R X T A B LOMEDHI CIU SAME MEM Rewind-Say-Again Button MARINE HH500 CALL ENT SETUP MEM ESC 16/9 WX H M L TW SCAN SUBMERSIBLE Instant Channel 16/9 Button Memory/Escape Button Power Level/Weather Button VHF Microphone Antenna Backlit LCD Screen Push to Talk Button Channel Down Button Backlight/
Key Lock Button Bluetooth Button Call/Enter Button Tri-Watch Button SCAN Button Speaker A2 English MRHH500_ENG_CVR_vA_F_v8_MR HH 330 Cover 1/18/13 3:14 PM Page 4 Backlit LCD Screen and Product Features Introduction Introduction Product Features Introduction Notes Backlit LCD (Liquid Crystal Display) Screen Transmit and Receive Icons Weather Icon Key Tone Icon Signal Level Icon ROG GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME Active Channel Simplex Operation Icon Bluetooth VOX Icon Low/Medium/High Power Icons Roger Beep Icon Frequency Band Icon Button Lock Icon Bluetooth Icon Call Tone Icon Weather Alert Icon MEM Rewind-Say-Again Icon Battery Power Icon Memory Icon UIC Active Channel Map Icons Matrix Display Product Features Power Settings Selectable power settings produce 1, 3 or 6 watts of output power for near or distant calling. USA/International/Canada Channels Allows operation on any of the three (3) different channel maps established for these areas. All NOAA Weather Channels Instant access to all National Weather Channels, 24 hours a day. Submersible to JIS7 Standards Waterproof to 3.3 ft (1 m) of water for 30 minutes. Button/Key Lock Prevents accidental setting changes when button lock is set. Channel Scan/Memory Scan Use to scan through unlimited channels or memory locations to find conversations in progress. Matrix Display The display at the bottom of the LCD screen displays text letting the user know the current radio mode, function or operation. AA Battery Compatible Good for emergency backup. Includes AA battery tray (P/N CM 110-024). Instant Channel 16/9 Provides instant access to priority Channel 16 and calling Channel 9. Tri-Watch Use to monitor three (3) channels at once Channel 16 and two (2) programmable channels. Floating This radio will float if dropped overboard. It has an orange stripe so it's easy to retrieve. Must use included battery to float. 120V/12V Charger Included Use to charge battery pack, at home, in a car or in a boat. Product Features (continued) MicroBlueTM Bluetooth Wireless Technology in a unique noise canceling design. Widely compatible for all mobile phones with Bluetooth wireless technology. Rewind-Say-Again Replays missed VHF calls. Locking Desktop Charger Holds the radio or battery in place while charging. Vertical or horizontal mounting. Call Tones (Selectable) 10 selectable call tones Emergency Weather Alert Receive NOAA alerts when threatening weather is nearby. Speaker/Mic Jack Allows connecting optional Cobra Lapel Speaker/Mic and other Cobra accessories. Unlimited Memory Channels Allows programming of unlimited VHF memory channels. Signal Strength Meter Shows the strength of incoming or outgoing signals. Easy Redial Operation Redial of last phone number dialed. Voice Dialing Supports standard mobile phone voice dialing when paired to a compatible mobile phone. Noise Canceling Microphone Reduces effect of environmental noise when speaking. Illuminated Buttons Allows high visibility of all function buttons. Roger Beep Tone (Selectable) Confirmation tone indicates the completion of the users transmission and signals to others it is clear to talk. On or Off selectable. BURP The Cobra exclusive BURP feature expels water from the speaker grill if the unit is dropped in the water or is subjected to extreme rain and weather. Left blank intentionally for your notes A3 English A4 English 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 1 Introduction Table of Contents Introduction Our Thanks to You . A1 Customer Assistance . A1 Radio Controls and Indicators . A2 Backlit LCD (Liquid Crystal Display) Screen . A3 Product Features . A3 Important Safety Information . 2 General Precautions . 3 Recommendations for Marine Communication . 4 FCC Licensing Information . 5 Installation Included in this Package . 7 Install/Remove Antenna . 8 Wrist Strap and Belt Clip . 9 Batteries and Charger . 10 Operating Your Radio Getting Started . 13 Setup Mode Programming . 17 Bluetooth Mode Pairing and Programming . 22 Weather Mode Programming . 26 Standby/Receive and Transmit . 27 NOAA Weather Channels and Alert . 29 Advanced Operation . 31 Rewind Operation . 38 Mobile Phone Operation With Bluetooth . 40 Floating Feature . 46 Maintenance . 47 Troubleshooting . 47 VHF Marine Radio Protocols VHF Marine Radio Procedures . 48 Voice Calling . 50 Radiotelephone Calls . 52 Emergency Messages and Distress Procedure . 53 Warranty and Trademark Limited 3-Year Warranty . 57 Trademark Acknowledgement . 57 Customer Service Product Service . 58 Specifications (Typical) . 59 Appendix VHF Marine Channel Assignments . 60 Weather Channel Assignments . 75 Accessories . 76 Nothing Comes Close to a Cobra 1 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 2 Introduction Introduction Important Safety Information Introduction General Precautions Important Safety Information Before installing and using your CobraMarine VHF radio, please read these general precautions and warnings. Warning and Notice Statements To make the most of this radio, it must be installed and used properly. Please read the installation and operating instructions carefully before installing and using the radio. Special attention must be paid to the WARNING and NOTICE statements in this manual. WARNING Statements identify conditions that could result in personal injury or loss of life. NOTICE Statements identify conditions that could cause damage to the radio or other equipment. Safety Training Information This CobraMarine VHF radio also complies with the following guidelines and standards regarding RF energy and electromagnetic energy levels as well as evaluation of those levels for human exposure:
I FCC OET Bulletin 65 Edition 97-01 Supplement C, Evaluating Compliance with FCC Guidelines for Human Exposure to Radio Frequency Electromagnetic Fields. I American National Standards Institute (C95.1-1992), IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. I American National Standards Institute (C95.3-1992), IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields RF and Microwave. General Precautions The following WARNINGS and NOTICE information will make you aware of RF exposure hazards and how to assure you operate the radio within the FCC RF exposure limits established for the radio. WARNINGS Your radio generates electromagnetic RF (radio frequency) energy when it is transmitting. To ensure that you and those around you are not exposed to excessive amounts of that energy, DO NOT touch the antenna when transmitting. KEEP the radio at least two (2) inches (5 cm) away from yourself and others when transmitting. DO NOT operate with more than a duty cycle of 5% transmit, 5% receive and 90% standby. The radio is transmitting when the Talk button is pressed and the transmit information shows on the LCD screen. ALWAYS use only Cobra authorized accessories. DO NOT operate the radio in an explosive atmosphere, near blasting sites, or in any area where signs are posted prohibiting radio transmissions. NEVER place the transceiver or microphone/speaker where they might interfere with operation of your vessel or cause injury. DO NOT allow children or anyone unfamiliar with proper procedures to operate the radio without supervision. Failure to observe any of these warnings may cause you to exceed FCC RF exposure limits or create other dangerous conditions. 2 English Nothing Comes Close to a Cobra 3 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 4 Introduction Introduction General Precautions Introduction FCC Licensing Information NOTICE Your radio is waterproof only when the batteries are properly installed. AVOID using or storing the radio at temperatures below -4F (-20C) or above 140F (60C). KEEP your radio at least 3 ft (0.9 m) away from your vessels magnetic navigation compass. DO NOT attempt to service any internal parts yourself. Have any necessary service performed by a qualified technician. This radio is supplied with a lithium-ion (LiON) rechargeable battery pack. I Use only the Cobra charger to recharge lithium-ion (LiON) batteries in the radio. I Do not short circuit the battery pack. I When replacing the batteries, dispose of the old batteries properly. Batteries may explode if disposed of in a fire. Changes or modifications to your radio MAY VOID its compliance with FCC (Federal Communications Commission) rules and make it illegal to use. Recommendations for Marine Communication The frequencies your radio uses are set aside to enhance safety afloat and for vessel navigation and operational messages over a range suitable for nearshore voyages. If the 6 watt maximum output of your radio is not sufficient for the distances you travel from the coast, consider a higher powered handheld or installing a Cobra Marine fixed mount radio with up to 25 watts of output power. (Visit www.cobra.com or your local dealer for model availability.) If traveling far offshore, you should consider adding even more powerful radio equipment such as HF single side band or satellite radio for your vessel. The U.S. Coast Guard does not endorse cellular telephones as substitutes for marine radios. They generally cannot communicate with rescue vessels and, if you make a distress call on a cellular telephone, only the party you call will be able to hear you. Additionally, cellular telephones may have limited coverage over water and can be hard to locate. If you do not know where you are, the Coast Guard will have difficulty finding you if you are using a cellular telephone. However, cellular telephones can have a place on board where cellular coverage is available to allow social conversations and keep the marine frequencies uncluttered and available for their intended uses. Sea Tow Automated Radio Check (ARC) System Please try the Sea Tow Automated Radio Check service. Areas where the safety check service is available include the East Coast, Gulf of Mexico, and Southern California, as well as in select inland regions. The first and only boating safety program of its kind, the Sea Tow Automated Radio Check service is fully automated and allows 24 hour a day automatic responses to radio check calls. Conducting a radio check through the Sea Tow Automated Radio Check service couldnt be simpler. All boaters need to do is tune their VHF radios to Channel 24, 25, 26, 27 or 28, depending on the region, key the mic, and ask for a radio check. The Automated Radio Check system responds to each radio check with an automated reply, and also replays to the boaters original radio transmission, allowing him or her to assess the strength of the signal and confirm the VHF radio is in good working order. To find the Sea Tow Automated Radio Check service channel in an area, owners should visit http://www.seatow.com/arc. The web page links to an instructional video demonstrating how to use the service step by step. FCC Licensing Information CobraMarine VHF radios comply with the FCC (Federal Communications Commission) requirements that regulate the Maritime Radio Service. The radio operates on all currently allocated marine channels and is switchable for use according to U.S.A., International or Canadian regulations. It features instant access to emergency Channel 16 and calling Channel 9 as well as NOAA (National Oceanic and Atmospheric Administration) All Hazards Radio with Alert. Station License An FCC ship station license is no longer required for any vessel traveling in U.S.A. waters which uses a VHF marine radio, RADAR, or EPIRB (Emergency Position Indicating Radio Beacon), and which is not required to carry radio equipment. However, any vessel required to carry a marine radio on an international voyage, carrying an HF single side band radiotelephone, or carrying a marine satellite terminal must obtain a station license. FCC license forms and applications for ship and land stations can be downloaded through the Internet at www.fcc.gov. Forms can also be obtained by calling the FCC at 888-225-5322. 4 English Nothing Comes Close to a Cobra 5 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 6 Introduction FCC Licensing Information VHF Marine Radio Protocols Installation Included in this Package International Station License If your vessel will be entering the sovereign waters of a country other than the U.S.A. or Canada, you should contact that countrys communications regulatory authority for licensing information. Radio Call Sign Currently, the FCC does not require recreational boaters to have a license. The United States Coast Guard recommends that the boats registration number and state of registry (e.g., IL 1234 AB) be used as a call sign and be clearly visible on the vessel. Canadian Ship Station License You need a Radio Operators Certificate if your vessel is operated in Canadian waters. Radio Operator training and certification is available from the Canadian Power Squadron. Visit their website at http://www.cps-ecp.ca/. User Responsibility and Operating Locations All users are responsible for observing domestic and foreign government regulations and are subject to severe penalties for violations. The VHF frequencies on your radio are reserved for marine use and require a special license to operate from land, including when your boat is on its trailer. NOTE This device complies with part 15 of the FCC Rules. Operation is subject to the following two (2) conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC Warnings: Replacement or substitution of transistors, regular diodes or other parts of a unique nature, with parts other than those recommended by Cobra may cause a violation of the technical regulations of part 80 of the FCC Rules, or violation of type acceptance requirements of part 2 of the rules. Included in this Package You should find all of the following items in the package with your CobraMarine VHF radio:
Radio Drop-In Battery Charger AC Charger ROG VHF R X T A B LOMEDHI CIU SAME MARINE HH500 MEM TW SCAN CALL ENT SETUP MEM ESC 16/9 SUBMERSIBLE WX HML For connection to 120-volt power source. DC Charger LiON Battery Pack Antenna For connection to 12-volt power sources. Operating Instruction Manual Spring-Loaded Belt Clip Wrist Strap Radio Controls and Indicators Owners Manual Introduction Antenna Backlit LCD Screen Push to Talk Button Channel Down Button Backlight/
Key Lock Button Bluetooth Button Call/Enter Button Tri-Watch Button SCAN Button Speaker A2 English VHF MARINE RADIOMR HH500 FLT Nothing Comes Close to a Cobra English A n o s r e V i P
-
5 4 8
-
0 8 4
. o N t r a P a n h C n i i d e n i r t P Speaker/
Microphone External Cover Belt Clip Battery Battery Door Screw ON/OFF/
Volume Control Bluetooth Microphone Channel Up Button ROG VHF R X T A B LOMEDHI CIU SAME MEM Rewind-Say-Again Button MARINE HH500 CALL ENT SETUP MEM ESC 16/9 WX H M L TW SCAN SUBMERSIBLE Instant Channel 16/9 Button Memory/Escape Button Power Level/Weather Button VHF Microphone Alkaline Battery Tray 6 English Nothing Comes Close to a Cobra 7 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 8 VHF Marine Radio Protocols Installation Install/Remove Antenna VHF Marine Radio Protocols Installation Wrist Strap and Belt Clip Install/Remove Antenna Antenna 1. To install the antenna turn the antenna into the radio clockwise to tighten. Do not overtighten. 2. To remove the antenna turn the antenna counterclockwise. Wrist Strap and Belt Clip Belt Clip Use the spring-loaded belt clip to carry the radio on your person. 1. Slide the belt clip into the guide channel on the back of the radio until it is locked in place. 2. To attach the wrist strap, insert it through the hole at the top of the belt clip, feed it through the looped end and pull tight to secure to the belt clip. 3. Press open the belt clip, slide it over the belt and release the clip. 4. To remove the belt clip from the radio press the tab on the belt clip, which unlocks the clip, and slide it out. Belt Clip Insert Belt Clip onto Radio Wrist Strap Attachment Secure Radio ROG GMRS VHF R X T A B ATIS VOXLOMEDHI CIU SAME MEM MARINE HH500 CALL ENT SETUP TW MEM ESC SCAN 16/9 WX H M L Batteries and Charger LiON Battery Pack Install Battery Pack Tighten Screw The radio is shipped with a sealed lithium-ion (LiON) battery pack (P/N CM 110-026) that is rechargeable. WARNING The charger provided for this radio is only to be used to charge the battery pack provided. Do not charge any other type of batteries in the charger as fire, explosion or battery damage will occur. Avoiding extreme room temperatures will also help prolong the life of the battery pack for the radio. When your rechargeable batteries begin to discharge too quickly, it is time to install a new battery pack. Your radio will also operate with five (5) high-quality AA alkaline batteries, using the included alkaline battery tray. Installing the Battery Pack 1. Position the battery pack over the back of the radio. 2. Engage the battery pack into the radio by sliding to the top until battery pack is fully seated against radio housing. 3. Tighten the screw using the end of the belt clip to secure the battery pack to the radio. Do not overtighten. Only use the end of the belt clip to tighten the screw. 8 English Nothing Comes Close to a Cobra 9 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 10 VHF Marine Radio Protocols Installation Batteries and Charger VHF Marine Radio Protocols Installation Batteries and Charger Power Sources Initial Battery Charge Initial Charge The Cobra-provided LiON battery pack may be charged at home, in a car or in a boat using the appropriate 12V or 120V power cord with the charger. 1. Insert one (1) of the power cords into the back of the drop-in charger. 2. Insert the other end of the power cord into the appropriate 12V or 120V power source. 3. Remove battery pack spacer from the charger and insert the entire radio/battery into the charger. The metal charge contacts on the battery will contact the mating prongs in the charger to transfer the charging current. 4. Observe that the red light on the front of the charger glows to indicate that the battery pack is properly seated and the charger is operating. 5. Allow the batteries to charge for five (5) to six (6) hours before use. The light will change back to green when the battery is fully charged. WARNING Only the rechargeable LiON battery pack can be recharged. You MUST use one of the charging devices provided with this radio. Do not substitute any other type of charging adapter or charger base for this radio. Battery damage, fire or explosion may result. It is equally important to prevent the lithium-ion
(LiON) battery pack from freezing to obtain best performance from the battery pack. NOTE If the drop-in charger is used on a boat, Cobra recommends you attach it to a horizontal shelf or vertical bulkhead (using the screw holes provided) to prevent possible damage due to the boat rolling or pitching. The charging base has been designed to hold the battery pack in place during rough sea conditions. Remove Battery To Remove Battery Pack from Radio 1. Loosen the screw on the back of the battery pack. 2. Lift the bottom of the battery pack slightly to remove it from the radio housing. 3. Pull battery pack out of the radio housing. Battery Pack Charging Only Alkaline Battery Tray NOTE The LiON battery pack can also be charged in the battery charger without being installed in the radio. Insert the spacer into the battery charger to support the battery pack during this charging process. Follow the same procedures in Initial Charge to charge the battery pack. NOTICE Lithium-ion (LiON) batteries are toxic. Please dispose of properly. Some marine suppliers and electronics retailers accept old battery packs for recycling and some municipal waste disposal agencies have special provisions for battery disposal. Alkaline Batteries The alkaline battery tray acts as a backup or Emergency power source should the battery pack run low on power and need to be recharged. The radio will transmit at full power when using five (5) new AA alkaline batteries. WARNING Never attempt to recharge alkaline batteries. They are not made to be recharged, and should be disposed of in a proper manner. 10 English Nothing Comes Close to a Cobra 11 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 12 VHF Marine Radio Protocols Installation Batteries and Charger Fully Charged Partially Charged Fully Discharged Maintaining the Battery Charge As you use your radio, the battery power icon will show the battery power remaining. When the icon begins to flash, it is time to recharge or change the batteries. NOTE Radio will continue to receive signals when blinking but cannot transmit. NOTICE Use only the drop-in charger provided by Cobra. Do not use the charger with alkaline batteries; only the LiON battery pack is rechargeable. Spent alkaline batteries must be discarded and replaced. It is a good idea to keep a set of fresh, high-quality AA alkaline batteries with your radio. Should the rechargeable battery pack become discharged and no electrical power source is available, you can insert the included alkaline battery tray with fresh alkaline batteries and continue to use your radio. VHF Marine Radio Protocols Operating Your Radio Getting Started HH500 Radio ROG VHF R X T A B LOMEDHI CIU SAME MARINE HH500 MEM TW SCAN CALL ENT SETUP MEM ESC 16/9 WX HML SUBMERSIBLE Getting Started Refer to the foldout at the front of this manual to identify the various controls and indicators on your radio. Throughout this manual you will be instructed to Press or to Press and Hold various buttons (except Push to Talk) on the radio. Press means a momentary press of approximately one (1) second. Press and Hold means to hold the button down for approximately two (2) seconds. Whenever you press any button except the Talk button on your radio, a brief tone (beep) (if key tones are selected On) will sound to confirm the button press. With all button presses, the appropriate icon will appear on the LCD and the backlight will turn On. The backlight will stay On for 10 seconds after the button is released. At times, you will hear two (2) other sounds. Two (2) beeps will sound to confirm your setting changes and three (3) beeps will sound to notify you of an error. Common Radio Functions The following procedures define common operating functions of the radio when in either Marine Standby or Weather (WX) Standby modes. On/Off/Volume Control
(Clockwise) On/Off/Volume Control
(Counterclockwise) Power/Volume Control Power On/Off Control The On/Off/Volume control is located at the upper right side of the radio. Turning the On/Off/Volume control past the detent position will turn the radio On or Off. Volume Control Volume is controlled by turning the On/Off/Volume control. I To increase the volume, turn the On/Off/Volume control clockwise. I To decrease the volume, turn the On/Off/Volume control counterclockwise. 12 English Nothing Comes Close to a Cobra 13 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 14 VHF Marine Radio Protocols Operating Your Radio Getting Started VHF Marine Radio Protocols Operating Your Radio Getting Started Speaker/Mic Port Talk Button Backlight/Key Lock Button Key Locked Buttons ROG VHF R X T A B LOMEDHI CIU SAME MEM MARINE HH500 CALL ENT SETUP MEM ESC 16/9 WX H M L TW SCAN SUBMERSIBLE Key Lock Icon GMRS VHF 14 English Radio Speaker and Microphone The internal Radio Speaker and Microphone are located on the bottom front face of the radio below the lower control buttons. An optional Speaker/Microphone port is located at the top of the radio between the antenna and the Power/Volume control. Unthread the Speaker/Microphone port cover to access and install an optional Cobra speaker or microphone into this port. Talk Button Press and hold the Talk button to transmit messages. Release the Talk button to stop transmitting. Backlight/Key Lock Button To Display the Backlight Momentarily:
Press the Backlight/Key Lock button. The backlight will remain On for 10 seconds. If the backlight is already On, another press of the Backlight/Key Lock button will turn it Off. Key Lock To prevent accidental changes to your settings, you can lock all of the following buttons:
I Channel Up Button I Channel Down Button I SCAN Button I MEM/ESC Button I WX/H-M-L Button I 16/9 Button I TRI-WATCH Button I Call/Enter/Setup Button To Lock or Unlock the Buttons:
Press and hold the Backlight/Key Lock button for two
(2) seconds. The Key Lock icon will appear or disappear in the LCD. When Key Lock is On, pressing any of the listed buttons on the front of the radio will result in a three (3) beep error message. Both the Backlight/Key Lock button and the Talk button are active you can Receive (Rx) or Transmit (Tx) a message with Key Lock On, but you cannot change the channel. Channel Up/Down Buttons MARINE HH50 Channel Up/Down Buttons Your radio will Receive (Rx) and Transmit (Tx) VHF signals on the channel indicated on the LCD display. You can change the channel at any time using the Channel Up/Down buttons. CALL ENT SETUP Currently On Channel 88 R X T A B ATIS VOX LOMEDHI CIU SAM SCAN Button MEM ESC SCAN To Change Channels:
Press the Channel Up/Down button. If you are on Channel 88, pressing the Channel Up button will advance to Channel 01. If you are on Channel 01, pressing the Channel Down button will advance to Channel 88. You can press and hold the Channel Up/Down button for fast advance. The beep sound will occur only at the first press of the button and not during fast advance. If the new channel selected is restricted to low power, the radio will automatically switch to Low Power mode and the Low Power icon will appear on the LCD. If the radio is in the Key Lock mode, the channel will not change and the three (3) beep error signal will sound. SCAN Button Press and release the SCAN button to scan all channels. The SCAN icon will display on the LCD display. Scanning begins at lower channels, and scans to higher channels. Press the Channel Up/Down button to change the scan direction. When a signal is received in SCAN mode, the radio will pause 10 seconds before resuming SCAN operation. The scan will stop on the paused channel and remain there when the Talk button is pressed. In Memory mode, press and release the SCAN button to scan all memory channels. Because the unit is already in the Memory Channel mode, only the channels in the memory bank will be displayed. NOTE Memory channels need to be saved to effectively enter the Memory Channel mode and scan all memory channels. Nothing Comes Close to a Cobra 15 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 16 VHF Marine Radio Protocols Operating Your Radio Getting Started VHF Marine Radio Protocols Operating Your Radio Setup Mode Programming EMH-M-L Power Button SC WX H M L High/Medium/Low (H-M-L) Power Button Your radio can transmit selectively at 1, 3 or 6 watts of power. Cobra suggests you maintain the low power setting for short-range communications. You will conserve battery life and avoid overpowering nearby stations with a low power setting signal. Use the high power setting for long-range communications or when you do not receive a response to a signal sent at 1 watt. To Toggle Between H-M-L Power Modes:
Press the H-M-L Power button. The LCD will show which mode is in effect. Some channels are restricted for a maximum use of 1 watt. Your radio will automatically set the power to Low Power mode when you select those channels. NOTE Some channels, frequency bands and countries of use might not be able to operate in High Power mode. NOTE A few channels are Receive only and will not transmit in these channels. Call/Enter/Setup Button CALL ENT SETUP MEM Call/Enter/Setup Button The Call/Enter/Setup button has multiple functions. It is generally used in the following ways:
I Press and release to transmit your unique Call Tone signal to another radio. I Press and hold to enter any Setup menu. I Functions as an Enter button when making a selection in any Setup menu. Setup Mode Programming The following series of procedures is designed to allow you to set the programmable features of your radio. Correctly following these steps results in a minimal amount of radio setup programming time. During setup programming, the matrix display will show text describing the programming action you are now performing. Marine Standby Mode GMRS VHF R X T A B ATIS VOXLOMEDHI CIU SAME MEM NOTE When in the Setup mode, if you stop programming for longer than 15 seconds, your entry will be saved and the radio will go back to the Marine Standby mode. When you return to Setup mode and continue programming you will see the last value displayed. While in the Setup mode, you will not receive any signal reception except when setting squelch. Marine (VHF) Mode Programming Programming these features will allow you to customize certain features of this radio to enhance your On-Water radio use. Start from Marine Standby mode to begin Marine (VHF) Setup programming. SAFETY AND DISTRESS will be displayed on the matrix. Press and hold the Call/Enter/Setup button for two (2) seconds to enter the programming mode. The mode programming follows this sequence:
I Squelch Level Set I UIC Channel Map I Tone Alert On/Off I Call Tone Select I Roger Beep On/Off I Key Tone On/Off I Rewind Enable/Disable 16 English Nothing Comes Close to a Cobra 17 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 18 VHF Marine Radio Protocols Operating Your Radio Setup Mode Programming VHF Marine Radio Protocols Operating Your Radio Setup Mode Programming MARINE HH50 Channel Up/Down Buttons CALL ENT SETUP Squelch Control GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Squelch Control Squelch Control filters weak signals and radio frequency (RF) noise so that you will clearly hear the signals you want. The Squelch Control on this radio is set through the following keypad operation. To Set Squelch Control:
1. With the power On, push and hold Call/Enter/Setup button to access the Setup menu. 2. Squelch control will be the first menu item to appear. Press the Channel Up and Channel Down buttons to set level. The signal level bar graph shows squelch level while you are in Setup mode on the squelch adjust function. 3. To adjust your squelch, press the Channel Down button until you hear a hissing sound, then press and release the Channel Up button until the hissing stops. This will establish a Baseline squelch. 4. By pressing the Channel Up button further, you will filter weak and medium strength signals. By pressing Channel Down button, you will receive weaker signals. 5. Press the Call/Enter/Setup button to save this entry and move to the next Setup mode programming. NOTE If the Squelch is set so that you can hear a continuous hissing sound, the Memory Scan and Tri-Watch functions will be blocked. Active Channel Map Icon A B CIU EDHI SAM MARINE HH50 Channel Up/Down Buttons CALL ENT SETUP Call Tone Alert GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM USA/International/Canada Channel Maps Three (3) sets of VHF Channel Maps have been established for marine use in the USA, Canada, and the rest of the world
(International). Most of the channels are the same for all three (3) maps, but there are definite differences (see table in the Appendix on page 64). Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose. To Set Channel Map Operating Area:
1. The Channel Map mode is the second mode on the Marine (VHF) Setup programming. 2. U, I and C will display, with the current setting
(the U icon is the default) flashing. 3. Press Channel Up/Down button to select the U, I or C icon. 4. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming. NOTE One or two of the channel maps might have been disabled for sales of this radio in some countries. Call Tone Alert If Call Tone Alert is set to On, the radio will alert you to a call from a compatible Cobra radio with a Call Alert. To Set Call Tone On or Off:
1. Display will show Call Tone icon flashing and the matrix will display CALL TONE ON or OFF. 2. Press Channel Up/Down button to select ON or OFF. 3. Press the Call/Enter/Setup button to save this entry and move to the next Setup mode programming. The Call Tone icon will show in the Standby mode when set to ON. 18 English Nothing Comes Close to a Cobra 19 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 20 VHF Marine Radio Protocols Operating Your Radio Call Tone Select R X T A B ATIS VOX LOMEDHI CIU SAME GMRS VHF MEM Setup Mode Programming Call Tone Select This setting will also allow you to transmit a unique Call Tone alert to identify your radio when you transmit messages. You can select from one of 10 different Call Tone signals. To Set Call Tone:
1. From the previous press of the Call/Enter/Setup button, the matrix will display CALL TONE SELECT and the display will flash the current Call Tone number (01 through 10). 2. Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds. 3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming. NOTE Call Tones are not usually used for Marine VHF communications. We allow you to turn it On for your unique communication needs. It is only compatible with other Cobra VHF radios. Setup Mode Programming Rewind Enable/Disable If Rewind is enabled, the last 20 seconds of incoming audio is recorded and you can play back missed VHF calls by pressing the Rewind button. 16/9 1. Display will show the Rewind icon flashing and the matrix will display REWIND ENABLE or DISABLE. 2. Press Channel Up/Down button to select ENABLE or DISABLE. 3. Press Call/Enter/Setup button to save entry. VHF Marine Radio Protocols Operating Your Radio Rewind Button TW CALL ENT SETUP MEM Rewind Enable GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Roger Beep Mode R X T A B ATIS VOX LOMEDHI CIU SAME MEM Key Tone Mode GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Roger Beep Mode In Roger Beep mode, your listener will hear an audible tone when you release the Talk button. This alerts your listener that you are finished talking and it is OK for them to speak. GMRS VHF To Set Roger Beep On or Off:
1. Display will show ROG icon flashing and the matrix will display ROGER BEEP ON or OFF. 2. Press Channel Up/Down button to select ON or OFF. ROG will be displayed when On. 3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming. Key Tone Mode In Key Tone mode, an audible tone will sound each time a button is pressed or you change a setting. To Set Key Tone On or Off:
1. Display will show Key Tone icon flashing and matrix will display KEY TONE ON or OFF. 2. Press Channel Up/Down button to select ON or OFF. 3. Press Call/Enter/Setup button to save entry. 20 English Nothing Comes Close to a Cobra 21 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 22 Bluetooth Mode Pairing and Programming VHF Marine Radio Protocols Operating Your Radio Bluetooth Mode Pairing and Programming VHF Marine Radio Protocols Operating Your Radio Bluetooth Mode Pairing and Programming Bluetooth wireless technology is a standard which has been developed for use in mobile (cell) phones and other devices. This radio can be wirelessly linked to your mobile phone if your mobile phone also has Bluetooth. This process of linking your mobile phone and this radio requires a one-time pairing after which the two devices can be connected when they are within range. When connected, this radio can act as the speaker and microphone of your mobile phone while your phone is stowed in a safe and dry location. This programming section shows you how to complete the pairing process. It also shows you how to change some settings related to the Bluetooth functionality of your radio. Bluetooth Button M Pairing Your Mobile Phone:
1. Press and release the Bluetooth button to enter BLUETOOTH Standby. The matrix will display BLUETOOTH STANDBY and the blue keypad backlight will come On. 2. Press and hold the Bluetooth button for four (4) seconds
[until the radio beeps four (4) times] from the Bluetooth Standby mode. The blue backlight will light. Your radio is now in a Pairing Mode and can be found by your phone. While in pairing mode, the LCD will display PAIRING as shown in the illustration below. 3. Follow the mobile phones instructions to search for available pairing with another Bluetooth device. This can often be found in the Tools or Settings menu of your mobile phone. Enter the P.I.N. (Personal Identification Number 0000), on your mobile phone if prompted. Wait for the pairing process to complete. C EN GMRS VHF Bluetooth Standby Mode, Unpaired State R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Bluetooth Pairing Mode GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Bluetooth Pairing R X T A B ATIS VOX LOMEDHI CIU SAME SAME Bluetooth Pairing and Connection Complete GMRS VHF 4. You will then see a confirmation of successful pairing or a notice to try again if pairing did not occur. The matrix will display BLUETOOTH CONNECTED once the process is completed. MEM MEM NOTE This process only needs to be completed for first time operation. From then on, as long as your mobile phone is within 30 feet (10 meters) of the radio, the two units will Connect automatically. GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Bluetooth Mode Programming The default settings for how your radio answers and conducts Bluetooth mobile phone calls can be adjusted. VOX GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM VOX On or Off The VOX function converts the radio microphones pickup of your voice from being controlled by the PTT button to being activated by your voice. When VOX is On, the PTT button does not need to be pressed to transmit your voice, and you can just speak into the microphone. When VOX is Off, you need to press the PTT button while speaking. To Change Between VOX On and Off:
1. From the Bluetooth Standby mode, press and hold Call/Enter/Setup button to access the Setup menu. VOX On/Off will be the first menu item to appear. The display will show BT VOX, the Vox icon and ON or OFF flashing. 2. Press the Channel UP/Down button to select ON or OFF. 3. Press the Call/Enter/Setup button to confirm your selection and move to the next Setup mode programming. 22 English Nothing Comes Close to a Cobra 23 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 24 Bluetooth Mode Pairing and Programming Introduction VHF Marine Radio Protocols Operating Your Radio Call Tone Alert R X T A B ATIS VOX LOMEDHI CIU SAME GMRS VHF Call Tone Alert If Call Tone Alert is set to On, the radio will ring with one of your Cobra selected tones when you receive a call on your mobile phone. If Call Tone Alert is set to Off, the radio will ring with the mobile phones default ring tone. MEM To Set Call Tone On or Off:
1. The display will show BT CALL TONE, the Call Tone icon and ON or OFF flashing. 2. Press Channel UP/Down button to select ON or OFF. 3. Press the Call/Enter/Setup button to save this entry and move to the next Setup mode programming. Call Tone Select R X T A B ATIS VOX LOMEDHI CIU SAME GMRS VHF Call Tone Select (Ring Tones) This setting controls what ring tones are used to alert for incoming calls on your mobile phone. Ten different ring tones are available from which to choose. MEM To Set Call Tone:
1. The display will show BT CALL TONE SELECT and the current Call Tone number (01 through 10) flashing. 2. Press the Channel Up/Down button to select a different Call Tone. An example of each call tone will sound for 1.5 seconds. 3. Press Call/Enter/Setup button to save this entry and move to the next Setup mode programming. VHF Marine Radio Protocols Operating Your Radio Bluetooth Radio On GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MEM Bluetooth Mode Pairing and Programming Bluetooth Radio On/Off This setting allows you to turn On and Off the small Bluetooth radio inside this VHF radio. The default setting is ON. Turning it Off can save some power. It can easily be switched On at any time. To Set Bluetooth On and Off:
1. The display will show BLUETOOTH RADIO ON or OFF flashing. 2. Press Channel UP/Down button to select ON or OFF. 3. Press the Call/Enter/Setup button to save this entry. You have now ended Bluetooth Setup mode programming. GMRS VHF Bluetooth Radio Off R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM 24 English Nothing Comes Close to a Cobra 25 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 26 Introduction VHF Marine Radio Protocols Operating Your Radio Weather Mode Programming Weather (WX) Mode Programming Programming these features will allow your radio to listen to all NOAA Hazard Alert radio channels. Start from WX Alert Standby mode to begin WX Alert Setup programming. Press and hold the Call/Enter/Setup button for two (2) seconds to enter the programming mode. GMRS VHF Weather Alert Standby R X T A B ATIS VOX LOMEDHI CIU SAME MEM WX Alert On/Off GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME To Set WX Alert On or Off:
1. WX Alert mode is the first mode that begins WX Alert Setup programming. From the WX Standby mode, press and hold the Call/Enter/Setup button to enter the Weather mode programming. 2. Display will show WX Alert icon and flashing matrix will display WX ALERT ON or OFF. 3. Press Channel Up/Down button to select ON or OFF. 4. Press Call/Enter/Setup button to save this entry and move to the next setup programming mode. MEM VHF Marine Radio Protocols Operating Your Radio WX Auto Search (SCAN) R X T A B ATIS VOX LOMEDHI CIU SAME GMRS VHF MEM Standby/Receive and Transmit To Set WX Auto Search (SCAN) On or Off:
WX auto search setup is only shown if WX Alert is set to ON. 1. Display will show Weather icon and the matrix will display WX SCAN with ON or OFF flashing. 2. Press Channel Up/Down button to select ON or OFF. 3. Press the Call/Enter/Setup button to save entry. You have now ended the WX Setup programming mode and will enter the WX Alert Standby mode. NOTE When WX Auto Search (SCAN) is set to On, weather channel scanning will start automatically and scan all available weather channels. When the user-selected weather channel falls below the preset squelch level, the weather channel will change to a new weather channel under the following conditions:
I WX Alert is engaged. I WX received signal level falls below a preset squelch or the user-selected weather channel and radio is in WX Standby OR radio is in VHF Standby and there is no channel activity. I WX Alert is detected on another weather channel. Standby/Receive and Transmit Marine Standby and Receive (Rx) Mode Marine Standby mode is the default mode for the radio whenever it is turned on. From this mode, you can change current settings by becoming familiar with the different key functions in Marine Standby mode. While in Marine Standby mode, the user will be able to transmit by pressing the Push to Talk (Talk) button. Signals in Receive (Rx) mode will be received on the selected channel(s), and alerts broadcast by NOAA will activate the corresponding NOAA weather alert channels in your radio. NOTE Coast Guard alerts are broadcast on Channel 16. You must have the WX Alert turned On to receive NOAA weather alerts. While in Marine Standby mode, you will receive any messages sent on the channel to which you are tuned. 26 English Nothing Comes Close to a Cobra 27 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 28 VHF Marine Radio Protocols Operating Your Radio Check Channel Number R X T A B A ATIS VOX LOMEDHI B IU X LOMEDHI S CIU SAM Low Power Mode Talk Button Standby/Receive and Transmit Transmit (Tx) Mode Transmit (Tx) mode gives you the ability to interact with safety services, other vessels and shore stations. When you use this capability, be sure to follow the procedures and to observe the courtesies that govern its use so everyone benefits. See Appendix to help you select the proper channels. To Transmit a Message:
1. Check to see that your radio is set to a proper channel for the type of message you plan to send. 2. Toggle to the Low Power setting. 3. With the microphone about 2 in. [51 mm] from your mouth, press and hold the Talk button and speak into the microphone. The Transmit icon will appear on the LCD. 4. Release the Talk button when you are finished speaking. Your radio can only operate in either Transmit (Tx) or Receive (Rx) mode at any given time. You will not hear the response to your message unless the Talk button is released. Battery Power icon is held at the level it was at during receive. Standby/Receive and Transmit VHF Marine Radio Protocols Operating Your Radio NOTE If the Talk button is held down for five (5) minutes, the radio will automatically sound a series of beeps and cease transmitting to prevent unwanted signal generation and battery drain. As soon as the Talk button is released, it can be pressed again to resume transmission. G V G V Transmit (Tx) Icon R X T A Receive (Rx) Icon R X T A NOAA Weather Channels and Alert Monitoring the weather will probably be a frequent use of your radio. NOAA provides continuous, around-the-clock broadcasts of the latest weather information. Taped weather messages run every four (4) to six (6) minutes and are revised every two (2) or three (3) hours, or as needed. The Coast Guard also announces weather and other safety warnings on Channel 16. Smart boaters keep an eye on safety and an ear to the radio and never let the weather catch them unaware. NOAA Emergency Weather Alert In the event of a major storm or other weather condition requiring vessels at sea or on other bodies of water to be notified, NOAA broadcasts a 1050 Hz tone that receivers such as your CobraMarine VHF radio can detect and warn you of a weather alert condition. When the Weather Alert mode on your radio is On, this signal will produce a loud tone from the speaker in the radio and will automatically switch to the alerting weather channel so the alert broadcast can be heard. NOAA Test Alert System To test this system, NOAA broadcasts the 1050 Hz signal every Wednesday sometime between 11 a.m. and 1 p.m. in each local time zone. Any receiver that can detect the weather alert tone may use this service to verify that this system is functioning properly. 28 English Nothing Comes Close to a Cobra 29 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:16 PM Page 30 Standby/Receive and Transmit VHF Marine Radio Protocols Operating Your Radio EMWX/H-M-L Button SC WX H M L Weather Alert Standby R X T A B ATIS VOX LOMEDHI CIU SAME GMRS VHF MEM Weather (WX) Standby Mode To enter and exit the WX Standby mode, press and hold the WX/H-M-L button. Receiving a Weather Alert NOAA broadcasts weather information as described in the NOAA weather channels section on page 75 of this manual. When NOAA broadcasts a weather alert signal and your radio is in WX Alert Standby mode, the following items will be displayed on the LCD display:
I The WX icon (cloud/sun) icon will be displayed. I The last used weather channel will be displayed. I The bar graph will display received signal strength level. I The WX Alert icon (safety triangle) will be displayed. I The matrix will display WEATHER STANDBY. NOTE Only one (1) or two (2) of the weather channels will be operating in any given location [only in Receive (Rx) mode]. You will need to select the channel with the strongest signal in your location. NOTE When in the WX Alert mode, and NOAA sends the 1050 Hz alert tone, the radio will sound a series of loud beeps regardless of the volume control setting. VHF Marine Radio Protocols Operating Your Radio Advanced Operation Advanced Operation Channel 16/9 Mode Channel 16/9 mode gives you quick access to calling on Channel 16 and Channel 9 from any operational mode. To Switch to Channel 16 or Channel 9:
1. Press the Channel 16/9 button to change to Channel 16. 2. Press the Channel 16/9 button again to change to Channel 9. 3. Press the Channel 16/9 button a third time and return to the last used channel. Channel 16/9 Button ALL SETUP EM SC 16/9 WX Channel 16 or Channel 9 R X T A B ATIS VOX LOMEDHI CIU SAM R X T A B ATIS VOX LOMEDHI CIU SAM 30 English Nothing Comes Close to a Cobra 31 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 32 VHF Marine Radio Protocols Operating Your Radio Advanced Operation VHF Marine Radio Protocols Operating Your Radio Advanced Operation TRI-WATCH Button TW TRI and MEMIcons CALL ENT SET MEM ESC GMRS VHF Tri-Watch Mode Tri-Watch mode gives you one (1) button access to scan a total of three (3) channels of most importance to you. Channel 16 is preprogrammed and will always be one (1) of the scanned locations. Two (2) other channels of your choice can be stored in the radio. These channels can be edited and/or recalled during future engagements of Tri-Watch mode. NOTE The radio must be squelched for Tri-Watch mode to function. See page 18 for Squelch procedure. R X T A B ATIS VOX LOMEDHI CIU SAME MEM Channel Up/Down Button MARINE HH50 CALL ENT SETUP Tri-Watch Setup To Program or Edit the Tri-Watch Channels:
1. Press and hold the TRI-WATCH button from Marine Standby mode for two (2) seconds to activate Tri-Watch Setup mode. The MEM icon on the display will turn On and the matrix will display TW MEM ENTER 01. NOTE The main channel number will flash to indicate channel position. If there is no input activity for 15 seconds, the radio will sound three (3) beeps and return to Marine Standby mode. 2. Press Channel Up/Down button to select the desired Tri-Watch channel. 3. Press and release TRI-WATCH button or Call/Enter/Setup button to confirm entry. 4. Repeat steps 2 and 3 to program the remaining additional Tri-Watch memory channel. 5. After programming both Tri-Watch memory channels the radio will immediately engage Tri-Watch mode. TRI-WATCH Button TW Tri-Watch Scan Mode CAL ENT SE MEM ESC GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Using Tri-Watch Tri-Watch Scan Mode:
1. From Marine Standby mode, press the TRI-WATCH button. The TW SCAN will display on the matrix along with the three marine channels stored in the Tri-Watch memory. 2. The radio will scan through the three (3) Tri-Watch memory channels. 3. A signal on any one (1) of the three (3) channels will stop the scan for 10 seconds to allow you to listen to the traffic on that location. NOTE After the Tri-Watch scan stops to monitor a channel, as long as you do not press any buttons within 10 seconds, your radio will automatically resume scanning the Tri-Watch channels. 4. Press the Channel Up/Down button to resume scanning the Tri-Watch channels or to change the scan direction. 5. To EXIT the Tri-Watch scan, press the TRI-WATCH button again, and the radio will return to Marine Standby mode. 32 English Nothing Comes Close to a Cobra 33 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 34 VHF Marine Radio Protocols Operating Your Radio C ENT SETUP MEM/ESC Button MEM ESC CAN Memory Location Number H M L GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MARINE HH50 Channel Up/Down Buttons CALL ENT SETUP Channel Number GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Advanced Operation VHF Marine Radio Protocols Operating Your Radio Advanced Operation Memory Location Mode Your radio has unlimited memory locations for storing your most frequently used channels. These memory locations can be selected individually or can be scanned. (See page 37 under Memory Location Scan.) To enter Memory mode, press MEM/ESC button. The display will show the MEM icon and the Memory Channel bank will be displayed on the matrix. To Program Memory Locations:
1. Press and hold the MEM/ESC button for two (2) seconds. The memory location number will be displayed on the matrix and the MEM icon will be turned On. 2. Use the Channel Up/Down button to advance to the memory location (00-99) you want to program. 3. Press the MEM/ESC button to select the memory location. 4. Use the Channel Up/Down button to change to the channel you want to store into the selected memory location. 5. Press the MEM/ESC button to program that channel. The memory location will be displayed on the matrix again. Repeat steps 2 through 5 to program as many additional memories as you want. 6. Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode. 7. Press and release the MEM/ESC button again to return to Marine Standby mode. MEM Icon GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM To Recall a Stored Memory Location:
1. Press the MEM/ESC button. The MEM icon will be turned On. 2. Press the Channel Up/Down button to select the memory location. If a memory location has been programmed, its associated channel will display on the LCD. Your radio is now in Marine Standby mode on the selected memory location. To Exit Memory Location Mode:
Press the MEM/ESC button to return the radio to Marine Standby mode. The last channel used in Marine Standby mode will now be displayed on the LCD and the MEM icon will disappear. To Erase Stored Memory Locations:
1. Press and hold the MEM/ESC button for two (2) seconds. The memory location number will be displayed on the matrix and the MEM icon will be turned On. 2. Use the Channel Up/Down button to advance to the memory location you want to erase. 3. Press the MEM/ESC button to select the memory location. 4. Use the Channel Up/Down button to change to the channel to read 00 at the selected memory location. 5. Press the MEM/ESC button to erase that channel. Repeat steps 2 through 5 to erase as many additional memories as you want. 6. Press and hold the MEM/ESC button for two (2) seconds. This will return the radio to Memory mode. 7. Press and release the MEM/ESC button again to return to Marine Standby mode. 34 English Nothing Comes Close to a Cobra 35 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 36 VHF Marine Radio Protocols Operating Your Radio Advanced Operation VHF Marine Radio Protocols Operating Your Radio Advanced Operation SCAN Button Channel Scan Mode During Channel Scan mode, the radio will rapidly switch from channel to channel through all the channels. MEM ESC SCAN SCAN Icon GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Channel Up/Down Buttons MARINE HH50 CALL ENT SETUP NOTE The radio must be squelched for Channel Scan mode to function. See page 18 for Squelch procedure. To Enter Channel Scan:
1. From Marine Standby mode, press the SCAN button. The radio will immediately begin to scan the entire channel map selected in the active channel map. CHANNEL SCAN will display on the matrix. 2. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location. After 10 seconds, the radio will resume scanning. 3. Press the Channel Up/Down button to resume scanning before the 10-second pause has completed or to change the scan direction. 4. To EXIT Channel Scan mode, press the SCAN button again. The SCAN icon will disappear from the LCD and the radio will return to Marine Standby mode. MEM/ESC Button C ENT SETUP MEM ESC SCAN Button SCAN Memory Channel Scan W MEM ESC VHF R X T A B VOX LOMEDHI CIU SAME MEM Memory Location Scan Mode During Memory Location Scan mode, the radio will rapidly scan through all pre-assigned memory channels. NOTE The radio must be squelched for Memory Location Scan mode to function. See page 18 for Squelch procedure. NOTE If there are fewer than two (2) memory locations programmed in the radio, the Memory Location Scan option will not be available. To program at least two
(2) memory locations, see page 34. To Enter Memory Location Scan:
1. From Marine Standby mode, press the MEM/ESC button. 2. Press the SCAN button. The radio will immediately begin to scan all pre-assigned memory channels. The MEM icon will show on the LCD, and MEM CHAN SCAN will display on the matrix along with the memory location. 3. A signal on any channel will stop the scan for 10 seconds to allow you to listen to the traffic on that location. After 10 seconds, the radio will resume scanning. 4. Press the Channel Up/Down button to resume scanning the Memory Location Scan channels before the 10-second pause has completed or to change the scan direction. 5. To EXIT Memory Location Scan mode, press the SCAN button again. The MEM icon will disappear from the LCD and the radio will return to Marine Standby mode. 36 English Nothing Comes Close to a Cobra 37 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 38 VHF Marine Radio Protocols Operating Your Radio Rewind Operation Rewind-Say-Again Feature Rewind Button ALL SETUP 16/9 Playback Message R X T A B ATIS VOX LOMEDHI GMRS VHF CIU SAME MEM Use the Cobra exclusive Rewind-Say-Again feature to replay or record the last 20 seconds of an incoming audio transmission. Example 1:
When engine noise, music or conversation creates too much noise to hear an inbound message clearly, press the REW button to hear the message a second time. Example 2:
When listening to an urgent distress message of an excited caller with confusing background noise, press the REW button to hear the message a second time and get life saving information. Use this feature to record call details including position coordinates, call signs, registration numbers and store details that will help authorities locate the distressed vessel. NOTE Hold the Rewind button to lock the recording memory
(the Rewind icon flashing) and save the currently recorded transmission. Using Rewind-Say-Again:
1. Press REW button to listen to 20 seconds of the last recorded audio transmission. The matrix will display REWIND PLAYBACK during the playing back of the message and a 20-second countdown begins in the lower right corner. 2. Press the TALK, REW or MEM/ESC button during playback to stop the playback transmission. The radio returns to Marine mode. Rewind Operation Using Rewind-Say-Again to Record VOICE Audio Transmission:
NOTE If the record memory is locked (rewind icon flashing), press and hold the REW button to unlock. 1. Press and hold SCAN button for two (2) seconds to enter Record mode. The matrix will display MIC RECORDER. 2. Press and hold PTT button to begin recording from radio microphone. The transmitter will turn off. The matrix will display MIC RECORDER ON and the seconds remaining will be shown in the lower right corner. If PTT button is released, recording stops. While recording, a 20-second countdown begins on display. When 20-second countdown time has ended, recording stops and two (2) beep tones will be heard. 3. Press and hold SCAN button again for two (2) seconds or press MEM/ESC button to cancel recording and return to last operation. VHF Marine Radio Protocols Operating Your Radio SCAN Button Enter Record Mic Recorder GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Mic Recorder ON GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM 38 English Nothing Comes Close to a Cobra 39 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 40 Mobile Phone Operation With Bluetooth VHF Marine Radio Protocols Operating Your Radio Mobile Phone Operation With Bluetooth VHF Marine Radio Protocols Operating Your Radio Mobile Phone Operation with Bluetooth Initiating a Call R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Connecting a Voice Dial Call GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MEM GMRS VHF Initiate a Phone Call There are several ways to initiate a call. These include initiating (as normal) from the mobile phone, using voice dialing and last number redial. To Initiate from the Mobile Phone 1. Simply dial a number on your mobile phone.
(See manufacturers instructions for making a call.) When the phones Send key is pressed, the radio will respond by changing over to Bluetooth mode and the matrix will display DIALING. 2. The matrix will display IN CALL when the receiving party, or their voice mail, answers. 3. To end a call, press and release the Bluetooth button. The radio will then return to previous Standby mode and resume normal operation. NOTE Please refer to the Bluetooth Mode Pairing and Programming section on page 22 for instructions on how to pair your mobile phone with this device, change ring tones, etc. The following section covers how to complete a phone call and other basic operations. Answering a Call R X T A B ATIS VOX LOMEDHI GMRS VHF CIU SAME SAME MEM MEM Bluetooth Button M C EN Connecting a Voice Dial Call GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MEM Answer Incoming Phone Calls This handheld radio, once properly paired and connected to your Bluetooth compatible mobile phone, can answer incoming calls received on your mobile phone. It can act as the speaker and microphone, while your mobile phone stays safe and dry. It will also improve audio quality on both ends of the conversation. To Answer and End an Incoming Call:
1. The speaker will ring. The matrix will display ANSWER. 2. Press and release the Bluetooth button on the front panel. After the call is answered, the matrix will display IN CALL. 3. Begin conversation with the caller by a pressing the PTT (Push to Talk) key and speaking into the small microphone above the LCD. This is very similar to a standard radio operation and it completely eliminates all background noise when you are not speaking. NOTE To enable hands-free conversation or VOX mode
(pressing in the PTT key not required), use the Channel Up and Channel Down keys anytime when in Bluetooth mode. The VOX icon will turn on when VOX mode is enabled. The Bluetooth VOX setting does NOT reset to Off after a power cycle unlike the normal VOX associated with VHF mode. 4. To end a call, press and release the Bluetooth button. The radio will then return to previous Standby mode and resume normal operation. 40 English Nothing Comes Close to a Cobra 41 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 42 Mobile Phone Operation With Bluetooth VHF Marine Radio Protocols Operating Your Radio Using Voice Dial This feature allows you to use your voice to dial a contact from the contact list on your mobile phone. Initiating a Voice Dial Call GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Connecting a Voice Dial Call GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MEM NOTE Voice dialing is an advanced function and may not be supported by all phones. Cobra suggests you set it up and become familiar with it on your mobile phone before you attempt using it in conjunction with the radio or another Bluetooth device. To Initiate a Voice Dial Call:
1. Press and release the Bluetooth button to enter the Bluetooth Standby mode. 2. Press and release the Bluetooth button twice (2x) from Bluetooth Standby mode. This will initiate the voice dial feature on the connected mobile phone. 3. You will hear a beep or audio command from the phone. Press and hold the PTT (Push to Talk) button and speak the name into the radio. 4. The mobile phone will begin to dial the contact it recognizes. The call will be completed through the speaker and microphone of the radio. The matrix will display DIALING and IN CALL as the call is completed. 5. Hang up by pressing the Bluetooth button when you complete your call. VHF Marine Radio Protocols Operating Your Radio Bluetooth Button M C EN Bluetooth Radio On GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM MEM Bluetooth Radio Off GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME SAME MEM MEM Mobile Phone Operation With Bluetooth Last Number Redial This feature allows you to redial the last number stored in the mobile phones internal Call Log. This feature is supported by most mobile phones. To Initiate a Last Number Redial:
1. Press and release the Bluetooth button to enter the Bluetooth Standby mode. 2. From Bluetooth Standby, press and hold the Bluetooth button for two (2) seconds [until the radio beeps two (2) times]. 3. The connected mobile phone will redial the last number. The call will be complete through the speaker and microphone of the radio. 4. Hang up by pressing the Bluetooth button when you complete your call. To Disconnect (At the End of the Day) You might not want to take your calls through this VHF radio once you are back at the dock or in a dry location. See the instructions in the Bluetooth Mode Programming section on page 23 for instructions on how to turn Off the Bluetooth function of the radio. The matrix will display BLUETOOTH RADIO OFF. NOTE If switched to Off setting, then the radio will not reconnect with mobile phone on power up. It must be turned back On again from the Bluetooth Programming mode. 42 English Nothing Comes Close to a Cobra 43 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 44 Mobile Phone Operation With Bluetooth VHF Marine Radio Protocols Operating Your Radio I Please make sure to note your VOX setting. If VOX is set to On, then the receiving caller might hear conversation and noise in your background. This setting is retained in memory. If switched On, then it will be On the next time the radio is switched On and connected. I Can I use my mobile phone for emergency use?
No, Cobra does not endorse cellular telephones as a substitute for marine radios. They generally cannot communicate with rescue vessels and, if you make a distress call on your cellular telephone, only the party you call will be able to hear you. Additionally, cellular telephones may have limited coverage over water. If you do not know where you are, the Coast Guard will have difficulty finding you if you are using your cellular telephone. However, cellular telephones can have a place onboard where cellular coverage is available to allow social conversations and keep the marine frequencies uncluttered and available for their intended use. Mobile Phone Operation With Bluetooth VHF Marine Radio Protocols Operating Your Radio General Bluetooth Operation and Frequently Asked Questions I What is the Industry Standard Range for Bluetooth Wireless Technology?
The industry standard range for Bluetooth wireless technology is 30 feet
(10 meters). The radio will loose its pairing with the mobile phone if the mobile phone and the radio are separated farther than this. The radio will automatically reconnect with the mobile phone when the user comes back into range. I How many phones can the radio pair with?
The radio can only be paired to one mobile phone at a time. This is the standard operation for any Bluetooth headset or in-car Bluetooth system. I Do I need to have my mobile phone with me?
Yes, the phone call is actually completed through your mobile phone and your mobile phone operator/carrier. The mobile phone must be with the 30 feet
(10 meters) range of the radio. The radio does not increase the offshore range of your mobile phone. I Can I use a standard Bluetooth headset with this radio?
No, the radio is using the headset profile of the Bluetooth specification to pair with your mobile phone. It cannot pair to another Bluetooth headset. I Can I use this unit as a speakerphone or hands-free device?
Turning on VOX allows you to use the radio without pressing the PTT
(Push to Talk) button. The radio will still need to be operated in a face held position with the microphone close to the mouth. This radio uses a noise canceling microphone, and it will not operate well from the belt clip or another hands-free position. 44 English Nothing Comes Close to a Cobra 45 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 46 VHF Marine Radio Protocols Operating Your Radio 16 and Scan TW CALL ENT SETUP MEM ESC SCAN Burp Feature 16/9 WX H M L GMRS VHF R X T A B ATIS VOX LOMEDHI CIU SAME MEM Floating Radio R O G G M R S V H F X R T A CIU B S A M E A T I S V O X L O M E D H I M A R I N E H H 5 0 0 M A R I N E H H 5 0 0 M E M Floating Feature Burp Feature Cobras Burp feature allows the operator to expel water from inside the speaker grill. This is especially useful if the radio is dropped overboard or during extreme foul weather conditions. In these conditions, water can become trapped in the speaker grill and muffle the audio. To Activate Burp:
1. Press and release the 16/9 and SCAN keys at the same time. 2. The Burp tone(s) at maximum level will sound from the internal speaker for eight seconds. 3. During this time, the matrix will display BURP. 4. Hold the radio with the speaker grill down to help the water drain out. 5. After an 8-second interval, the radio will return to standby. Floating Radio This radio is designed to float if dropped overboard. The orange center makes it visible and easy to retrieve. This rugged radio is also designed to meet JIS7 (IPX7) specifications. This means its designed to operate properly after being submerged in one meter deep water for 30 minutes. NOTE Do not leave the radio floating in water permanently. This could cause premature corrosion of the battery contacts and other damage. The radio is only designed to float with its included Lithium-ion battery. Using other approved batteries might cause the radio to sink. This includes the optional AA battery tray, depending on the weight of the AA batteries used. Maintenance and Troubleshooting VHF Marine Radio Protocols Operating Your Radio Maintenance Very little maintenance is required to keep your CobraMarine VHF radio in good operating condition:
I Keep the radio and charger clean by wiping with a soft cloth and mild detergent. Do not use solvents or harsh or abrasive cleaners, which could damage the case or scratch the LCD screen. I If the radio is exposed to salt water, wipe with a soft, moist cloth at least once a day to prevent buildup of salt deposits, which could interfere with button operation. I If the radio will be stored for a long period, such as over the winter, remove the batteries from the battery tray and store them in a separate package. This is especially important if you are using alkaline batteries. Troubleshooting Problem No display on LCD when radio is turned On Batteries run down quickly Will transmit at one (1) or three (3) watts, but not at six (6) watts Will not transmit Possible Cause(s) Batteries are exhausted Batteries not installed properly Batteries are at the end of their life Batteries are low Selected channel is imited to one (1) watt Selected channel is limited to receive only Solution(s) Recharge or replace batteries Remove batteries and reinstall according to polarity markings Replace with new batteries Recharge or replace batteries Switch to another channel Switch to another channel No sound from speaker Volume level is too low or squelch level is too deep Re-adjust volume and squelch No response to button press No answer to calls Button lock is On Out of range of other station Signal is blocked by terrain Press Backlight/
Key Lock button Switch to three (3) or six
(6) watts or move closer Move until you have a line-
of-sight to the other station 46 English Nothing Comes Close to a Cobra 47 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 48 VHF Marine Radio Procedures Introduction VHF Marine Radio Protocols VHF Marine Radio Protocols VHF Marine Radio Procedures Maintain Your Watch Whenever your boat is underway, the radio must be turned On and be tuned to Channel 16 except when being used for messages. Power Try 1 watt first, if the station being called is within a few miles. If there is no answer, switch to 3 watts and call again. You have the ability to go up to 6 watts of output power to increase your calling distance. Remember, the lower wattage outputs will conserve your battery and minimize interference to other users. VHF Marine Radio Procedures VHF Marine Radio Protocols Prohibited Communications You MUST NOT transmit:
I False distress or emergency messages. I Messages containing obscene, indecent or profane language. I General calls, signals or messages (messages not addressed to a particular station) on Channel 16, except in an emergency or if you are testing your radio. I When you are on land. Calling Coast Stations Call a coast station on its assigned channel. You may use Channel 16 when you do not know the assigned channel. Calling Other Vessels Call other vessels on Channel 16 or on Channel 9. (Channel 9 is preferred for recreational vessel use.) You may also call on ship-to-ship channels when you know that the vessel is listening on a ship-to-ship channel. Initial Calling on Channel 16 or 9 The use of Channel 16 is permitted for making initial contact (hailing) another vessel. The limits on calling must be followed. Be reminded, Channel 16s most important function is for Emergency Messages. If for some reason, Channel 16 is congested, the use of Channel 9, especially in U.S. waters, may be used as the initial contact
(hailing) channel for non-emergency communication. Limits on Calling You must not call the same station for more than 30 seconds at a time. If you do not get a reply, wait at least two (2) minutes before calling again. After three (3) calling periods, wait at least 15 minutes before calling again. Change Channels After contacting another station on a calling channel, change immediately to a channel which is available for the type of message you want to send. Station Identification Identify, in English, your station by your FCC call sign (if available), vessel name and the state registration number, at both the beginning and at the end of the message. 48 English Nothing Comes Close to a Cobra 49 VHF Marine Radio Protocols Voice Calling I If the other does not respond, wait two (2) minutes and repeat. You are permitted to attempt contact three (3) times, two (2) minutes apart. If you still have not made contact, wait 15 minutes before trying again. I After communications are completed, each vessel must sign off with its call sign or vessel name and the word out and return to Channel 16. NOTE For best sound quality at the station you are calling, hold the microphone on the front of the radio at least 2 in. (51 mm) from your mouth and slightly off to one (1) side. Speak in a normal tone of voice. NOTE Over and Out The most commonly misused procedure words are over and out within the same transmission. Over means you expect a reply. Out means you are finished and do not expect a reply. 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 50 VHF Marine Radio Protocols Voice Calling Voice Calling You are required to listen to Channel 16 while standing by. Channel 16 is the distress and safety channel used for establishing initial contact with another station and for emergency communication. The Coast Guard also monitors Channel 16 for safety purposes for everyone on the water. NOTE Channel 9 may be used by recreational vessels for general-purpose calling. This frequency should be used whenever possible to help relieve congestion on Channel 16. The Coast Guard generally does not make urgent marine information broadcasts or weather warnings on Channel 9. Boaters are still asked to keep watch on Channel 16 whenever the radio is turned on and not in use with another station. To call another vessel or shore installation (e.g, lock or bridge tender):
I Make sure the radio is On. I Make sure you are in standby listening mode on Channel 16. Make sure Channel 16 is not in use. I When the channel is open (quiet), press the Talk button and call a vessel. Hold the radio or microphone several inches from your face and speak clearly and distinctly in a normal voice tone. Say name or station being called, THIS IS [your vessel name or call sign]. I Once contact is made, you must leave Channel 16 and go to another working channel. See channel listing on page 60. For Example The vessel Corsair is calling the vessel Vagabond:
Corsair: Vagabond, this is Corsair. Over. Vagabond: Please switch and answer on Channel 68 (or any proper working channel). Over. Corsair: Switching to Channel 68. Over. 50 English Nothing Comes Close to a Cobra 51 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 52 VHF Marine Radio Protocols Radiotelephone Calls Radiotelephone Calls Boaters may make and receive radiotelephone calls to and from any number on the telephone network by using the services of public coast stations. Calls can be made for a fee between your radio and telephones on land, sea and in the air. See the Appendix for the public correspondence (marine operator) channels. If you plan to use these services, consider registering with the operator of the public coast station that you plan to work through. These services can provide you with detailed information and procedures to follow. NOTICE You may disclose privileged information during a radiotelephone call. Keep in mind that your transmission is NOT private, as it is on a regular telephone. Both sides of the conversation are being broadcast and can be heard by anyone who has a radio and tunes to the channel you are using. Emergency Messages and Distress Procedure VHF Marine Radio Protocols Emergency Messages and Distress Procedure The ability to summon assistance in an emergency is the primary reason to have a VHF marine radio. The marine environment can be unforgiving, and what may initially be a minor problem can rapidly develop into a situation beyond your control. The Coast Guard monitors Channel 16, responds to all distress calls, and coordinates all search and rescue efforts. Depending on the availability of other capable vessels or commercial assistance operators in your vicinity, Coast Guard or Coast Guard Auxiliary craft may be dispatched. In any event, communicate with the Coast Guard as soon as you experience difficulties and before your situation becomes an emergency. Use the emergency message procedures only after your situation has become grave or you are faced with a sudden danger threatening life or property and requiring immediate help. Use Channel 16 to communicate your emergency message. Make sure you transmit on high power. If you are merely out of gas, do not send an emergency message. Drop your anchor and call a friend or marina to bring the fuel you need or to give you a tow. 52 English Nothing Comes Close to a Cobra 53 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 54 Emergency Messages and Distress Procedure Introduction VHF Marine Radio Protocols Emergency Messages and Distress Procedure Introduction VHF Marine Radio Protocols Marine Emergency Signals The three (3) spoken international emergency signals are:
MAYDAY The distress signal MAYDAY is used to indicate that a station is threatened by grave and imminent danger and requests immediate assistance. PAN The urgency signal PAN is used when the safety of the vessel or person is in jeopardy. (This signal is properly pronounced pahn.) SECURITE The safety signal SECURITE is used for messages about the safety of navigation or important weather warnings. (This signal is properly pronounced see-cure-ee-tay.) When using an international emergency signal, the appropriate signal is to be spoken three (3) times prior to the message. If You Hear a Distress Call You must give any message beginning with one (1) of these signals priority over any other messages. ALL stations MUST remain silent on Channel 16 for the duration of the emergency unless the message relates directly to the emergency. If you hear a distress message from a vessel, stand by your radio. If it is not answered, YOU should answer. If the distressed vessel is not nearby, wait a short time for others who may be closer to acknowledge. Even if you cannot render direct assistance, you may be in a position to relay the message. Marine Distress Procedure Speak slowly clearly calmly. 1. Make sure your radio is On. 2. Select Channel 16. 3. Press Talk button and say:
MAYDAY MAYDAY MAYDAY.
(Or PAN PAN PAN, or SECURITE SECURITE SECURITE.) 4. Say:
THIS IS [your vessel name or call sign], repeated three (3) times. 5. Say:
MAYDAY (or PAN or SECURITE)
[your vessel name or call sign]. 6. Tell where you are:
(what navigational aids or landmarks are nearby). 7. State the nature of your distress. 8. State the kind of assistance needed. 9. Give number of persons aboard and conditions of any injured. 10. Estimate present seaworthiness of your vessel. 11. Briefly describe your vessel (length, type, color, hull). 12. Say:
I WILL BE LISTENING ON CHANNEL 16. 13. End message by saying:
THIS IS [your vessel name or call sign]. OVER. 14. Release Talk button and listen. Someone should answer. If not, repeat the call, beginning at step 3 above. Keep the radio nearby. Even after your message has been received, the Coast Guard can find you more quickly if you can transmit a signal for a rescue boat to hone in on. 54 English Nothing Comes Close to a Cobra 55 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 56 Emergency Messages and Distress Procedure Warranty and Trademark Acknowledgement Warranty Introduction Introduction VHF Marine Radio Protocols For Example Mayday Mayday Mayday This is Corsair Corsair Corsair [or IL 1234 AB, repeated three (3) times]
Mayday Corsair (or IL 1234 AB) Navy Pier bears 220 degrees magnetic distance 5 miles Struck submerged object and flooding need pump and tow Four (4) adults, three (3) children aboard no one injured Estimate we will remain afloat one-half hour Corsair (or IL 1234 AB) is 26 ft sloop with blue hull and tan deck house I will be listening on Channel 16 This is Corsair (or IL 1234 AB) Over Limited 3-Year Warranty For Products Purchased In The U.S.A. Cobra Electronics Corporation warrants that its CobraMarine VHF radio, and the component parts thereof, will be free of defects in workmanship and materials for a period of three (3) years from the date of first consumer purchase. This warranty may be enforced by the first consumer purchaser, provided that the product is utilized within the U.S.A. Cobra will, without charge, repair or replace, at its option, defective radios, products or component parts upon delivery to the Cobra Factory Service department, accompanied by proof of the date of first consumer purchase, such as a duplicated copy of a sales receipt. You must pay any initial shipping charges required to ship the product for warranty service, but the return charges will be at Cobras expense, if the product is repaired or replaced under warranty. This warranty gives you specific legal rights, and you may also have other rights which may vary from state to state. It is a good idea to write out a script of the message form and post it where you and others on your vessel can see it when an emergency message needs to be sent. Exclusions: This limited warranty does not apply:
1. To any product damaged by accident. 2. In the event of misuse or abuse of the product, or as a result of unauthorized alterations or repairs. 3. If the serial number has been altered, defaced, or removed. 4. If the owner of the product resides outside the U.S.A. All implied warranties, including warranties of merchantability and fitness for a particular purpose are limited in duration to the length of this warranty. Cobra shall not be liable for any incidental, consequential or other damages; including, without limitation, damages resulting from loss of use or cost of installation. Some states do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations may not apply to you. For Products Purchased Outside The U.S.A. Please contact your local dealer for warranty information. Trademark Acknowledgement Cobra, CobraMarine, Nothing Comes Close to a Cobra, and the snake design are registered trademarks of Cobra Electronics Corporation, USA. Cobra Electronics Corporation is a trademark of Cobra Electronics Corporation, USA. 56 English Nothing Comes Close to a Cobra 57 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 58 Customer Service Introduction Product Service Product Service If you have any questions about operation or installing your new CobraMarine VHF product or if you are missing parts Please call Cobra first! DO NOT RETURN THIS PRODUCT TO THE STORE!
See customer assistance on page A1. If your product should require factory service, please call Cobra first before sending your radio. This will ensure the fastest turn-around time on your repair. You may be asked to send your radio to the Cobra factory. It will be necessary to furnish the following to have the product serviced and returned:
1. For warranty repair, include some form of proof-of-purchase, such as a photocopy of a sales receipt. If you send the original receipt, it cannot be returned. 2. Send the entire product. 3. Enclose a description of what is happening with the radio. Include a typed or clearly printed name and address of where the radio is to be returned. 4. Pack radio securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or Priority Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation, 6500 West Cortland Street, Chicago, Illinois 60707 U.S.A. 6. If the radio is in warranty, upon receipt of your radio, it will either be repaired or exchanged depending on the model. Please allow approximately three (3) to four (4) weeks before contacting Cobra for status. If the radio is out of warranty, a letter will automatically be sent informing you of the repair charge or replacement charge. 7. If your radio is returned for factory repair, it will be returned to you with default settings restored. If you have any questions, please call 773-889-3087 for assistance. Specifications Specifications Introduction Specifications General Number of Channels Channel Spacing Modulation Input Voltage Battery Life:
5% TX, 5% RX, 90% Standby Current Drain:
Standby Receive (Rx) Transmit (Tx) Temperature Range Radio Dimensions Radio Weight Receiver Frequency Range Receiver Type Sensitivity:
12 dB Sinad Adjacent Channel Selectivity Intermodulation and Rejection Spurious and Image Rejection AF Output Transmitter Frequency Range (Tx):
RF Output Power Spurious Emissions Microphone Type Frequency Stability FM Hum and Noise Bluetooth Classification Version Range All U.S., Canadian, International and NOAA Weather Channels 25 kHz 5 kHz Max. 7.4 VDC LiON: 8 hours @ 6 watts, 14 hours @ 1 watt 45 mA 200 mA 1.8 A @ High Power, 700 mA @ Low Power
-20C to 50C 4.8" x 2.4" x 1.4"
(123 mm x 62 mm x 36 mm) not including antenna 0 lbs 8 oz. (228 g) without batteries 156.050 to 163.275 MHz Double Conversion Super-Heterodyne
-121 dBm
-55 dB
-70 dB
-60 dB 250 mW @ 8 Ohms 156.025 to 157.425 MHz 1, 3 or 6 watts Max (5 Watts rated)
-55 dB Condenser 5 ppm 40 dB Class 2,1 2.0 10 Meters 58 English Nothing Comes Close to a Cobra 59 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 60 VHF Marine Channel Assignments VHF Marine Radio Protocols Appendix Introduction VHF Marine Channel Assignments Introduction Appendix VHF Marine Channel Assignments Three (3) sets of VHF channels have been established for marine use in the U.S.A., Canada and the rest of the world (International). Most of the channels are the same for all three (3) maps, but there are definite differences (see table on the following pages). Your radio has all three (3) maps built into it and will operate correctly in whichever area you choose. The following is a brief outline of the channel assignments in the U.S.A. Channel Map. Channel Assignments (English) Distress, Safety, and Calling Channel 16 Getting the attention of another station (calling) or in emergencies (distress and safety). Calling Channel 9 General-purpose (non-emergency) calling by non-commercial vessels. Recreational boaters are urged to use this channel to reduce congestion on Channel 16 Asignacin de canales de VHF para radiocomunicacin martima Existen tres (3) juegos de canales VHF para uso martimo en los EE.UU., Canad y el resto del mundo (internacional). La mayora de los canales coinciden en los tres (3) mapas, pero sin duda existen diferencias (consulte las tablas en las pginas siguientes). El radio incorpora los tres (3) mapas y funcionar correctamente en cualquiera de las tres reas. A continuacin presentamos en forma resumida las asignaciones de canales del Mapa de canales para EE.UU. Asignaciones de canales (Espaol) Auxilio, seguridad y llamadas Canal 16 Para ser odos por otra estacin (llamadas) o en casos de emergencia (auxilio y seguridad). Llamadas Canal 9 Llamadas de carcter general (excepto casos de emergencia) para embarcaciones no comerciales. Se le pide encarecidamente a la tripulacin de las embarcaciones recreativas usar este canal para reducir la congestin del canal 16. Intership Safety Channel 6 Ship-to-ship safety messages and for search and rescue messages to Coast Guard ships and aircraft. Seguridad entre embarcaciones Canal 6 Para mensajes de seguridad entre embarcaciones y para mensajes de bsqueda y rescate enviados a barcos y aviones de la guardia costera. Coast Guard Liaison Channel 22A To talk to the Coast Guard, Canadian Coast Guard (non-emergency) after making contact on Channel 16. Enlace con la guardia costera Canal 22A Para hablar con las guardias costeras estadounidenses y canadienses (excepto casos de emergencia) tras haber establecido contacto por el canal 16. Non-Commercial Channels 68*, 69, 71, 72, 78A, 79A*, 80A*
Working channels for small vessels. Messages must be about needs of the vessel, such as fishing reports, berthing and rendezvous. Use Channel 72 only for ship-to-ship messages. Commercial Channels 1A, 7A, 8, 9, 10, 11, 18A, 19A, 63A, 67, 72, 79A, 80A, 88A*
Working channels for working ships only. Messages must be about business or needs of the ship. Use Channels 8, 67, 72 and 88A only for ship-to-ship messages. No comerciales Canales 68*, 69, 71, 72, 78A, 79A*, 80A*
Canales activos para pequeas embarcaciones. Los mensajes debern estar relacionados con necesidades de las embarcaciones, como por ejemplo, informes de pesca, atraques y agrupamientos. Use el canal 72 solamente para mensajes entre embarcaciones. Comerciales Canales 1A, 7A, 8, 9, 10, 11, 18A, 19A, 63A, 67, 72, 79A, 80A, 88A*
Canales activos para embarcaciones activas solamente. Los mensajes debern estar relacionados con la actividad comercial o las necesidades de la embarcacin. Use los canales 8, 67, 72 y 88A solamente para mensajes entre embarcaciones. 60 English Nothing Comes Close to a Cobra 61 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 62 Appendix VHF Marine Channel Assignments Introduction Appendix VHF Marine Channel Assignments Channel Assignments (English) Asignaciones de canales (Espaol) Sea Tow ARC (Automated Radio Check) Channels 24, 25, 26, 27, 28 Tune your radio to the proper channel for your community. Conduct a radio check as you normally would. Upon releasing the mic, the system will replay your transmission, letting you hear how you sound. Public Correspondence (Marine Operator) Channels 60, 61, 84, 84A, 85, 85A, 86, 86A, 87, 87A, 88*
For calls to marine operators at public coast stations. You can make and receive telephone calls through these stations. Port Operations Channels 1A*, 5A*, 12*, 14*, 18, 19, 20A, 21, 22, 63A*, 65A, 66A, 73, 74, 75, 76, 77*, 79, 80, 81, 82 Used for directing the movement of ships in or near ports, locks or waterways. Messages must be about operational handling, movement and safety of ships. Navigational Channels 13, 67 Channels are available to all vessels. Messages must be about navigation, including passing or meeting other vessels. These are also the main working channels for most locks and drawbridges. You must keep your messages short and power output at no more than 1 watt. Remolque Marino CAR (Chequeo Automatizado de la Radio) Canales 24, 25, 26, 27, 28 Sintonice su radio en el canal apropiado para su comunidad. Realice un chequeo de la radio como lo hace normalmente. Al soltar el micrfono, el sistema repetir su transmisin, dej or como suena. Correspondencia pblica (operador martimo) Canales 60, 61, 84, 84A, 85, 85A, 86, 86A, 87, 87A, 88*
Para llamadas a operadores martimos en estaciones costeras pblicas. Usted puede realizar y recibir llamadas telefnicas a travs de estas estaciones. Operaciones portuarias Canales 1A*, 5A*, 12*, 14*, 18, 19, 20A, 21, 22, 63A*, 65A, 66A, 73, 74, 75, 76, 77*, 79, 80, 81, 82 Usados para dirigir el movimiento de las embarcaciones dentro de reas portuarias, esclusas o canales. Los mensajes debern estar relacionados con maniobras operacionales, movimientos y seguridad de las embarcaciones. Navegacin Canales 13, 67 Estos canales estn disponibles para todas las embarcaciones. Los mensajes debern estar relacionados con la navegacin, incluidas las maniobras para pasar o alcanzar otras embarcaciones. stos tambin son los principales canales activos para la mayora de las esclusas y puentes levadizos. Usted deber transmitir mensajes cortos y mantener la potencia de salida en un vatio como mximo. Maritime Control Channel 17 For talking to vessels and coast stations operated by state or local governments. Messages must be about regulation and control, boating activities, or assistance. Digital Selective Calling Channel 70 This channel is set aside for distress, safety and general calling using only digital selective calling techniques. Voice communication is prohibited; your radio cannot transmit voice messages on this channel. Weather Channels Wx 1 Thru 10 Receive-only channels for NOAA and Canadian weather broadcasts. You cannot transmit on these channels. NOTE
* These channels are restricted to the listed uses in certain parts of the country or for certain types of users only. Consult FCC rules or a knowledgeable radio operator before using them. 62 English Control martimo Canal 17 Para comunicarse con embarcaciones y estaciones costeras operadas por entidades gubernamentales locales o estatales. Los mensajes debern estar relacionados con regulacin y control, asistencia o actividades de navegacin. Llamadas selectivas digitales Canal 70 Este canal est reservado para solicitudes de auxilio, seguridad y llamadas de carcter general que usen solamente tcnicas de llamadas selectivas digitales. Las comunicaciones verbales estn prohibidas; el radio no puede transmitir mensajes de voz por este canal. Meteorologa Canales Wx 1 a 10 Canales de recepcin nicamente para difusin de informacin meteorolgica NOAA y canadiense. Usted no puede transmitir por estos canales. NOTA
* El uso de estos canales est dedicado a las aplicaciones que aparecen en la lista, en ciertas partes del pas o para ciertos tipos de usuario solamente. Consulte las normas de la FCC o a un operador de radio con experiencia antes de usarlos. Nothing Comes Close to a Cobra 63 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 64 Appendix Channel Number Nmero de canal VHF Marine Channel Assignments Channel Map Mapa de canales Frequency Frecuencia Power Limits Lmites de potencia USA EE.UU. Intl nternac Canada Transmit Canad Transm. Receive Recepcin 01 01A 02 03 03A 04 04A 05 05A 06 07 07A 08 09 10 11 12 13 156.050 156.050 156.100 156.150 156.150 156.200 160.650 156.050 160.700 160.750 156.150 160.800 156.200 156.200 156.250 160.850 156.250 156.300 156.350 156.350 156.400 156.450 156.500 156.550 156.600 156.650 156.250 156.300 160.950 156.350 156.400 156.450 156.500 156.550 156.600 156.650 1 watt USA and CAN 1 vatio EE.UU. y Canad Appendix VHF Marine Channel Assignments Channel Use (English) Uso de canales (Espaol) Public Correspondence (Marine Operator) Port Operations and Commercial, VTS in selected areas Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Government Only Public Correspondence (Marine Operator), Port Operations, Ship Movement West Coast (Coast Guard Only);
East Coast (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations, VTS in selected areas Intership Safety Public Correspondence (Marine Operator), Port Operations, Ship Movement Commercial Commercial (Intership Only) Boater Calling Channel, Non-Commercial (Recreational) Commercial Commercial, VTS in selected areas Port Operations, VTS in selected areas Intership Navigation Safety (Bridge-to-
Bridge). In U.S. waters, large vessels maintain a listening watch on this channel. Correspondencia pblica (operador martimo) Operaciones portuarias y comerciales;
VTS en reas selectas Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Entidades gubernamentales solamente Correspondencia pblica (operador martimo) operaciones portuarias,movimiento de embarcaciones Costa occidental (guardia costera solamente);
Costa oriental (pesca comercial) Correspondencia pblica (operador martimo) operaciones portuarias,movimiento de embarcaciones Operaciones portuarias; VTS en reas selectas Seguridad entre embarcaciones Correspondencia pblica (operador martimo) operaciones portuarias,movimiento de embarcaciones Comerciales Comercial (entre embarcaciones solamente) Canal de llamada de la tripulacin, no comercial (recreativo) Comerciales Comercial; VTS en reas selectas Operaciones portuarias; VTS en reas selectas Seguridad martima entre embarcaciones (de puente de mando a puente de mando). En aguas estadounidenses, las grandes embarcaciones se mantienen vigilantes con sus radios sintonizados en este canal 64 English Nothing Comes Close to a Cobra 65 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 66 VHF Marine Channel Assignments Channel Map Mapa de canales Frequency Frecuencia USA EE.UU. Intl nternac Canada Transmit Canad Transm. Receive Recepcin 156.700 156.750 156.700 Rx Only VHF Marine Channel Assignments Introduction Appendix Channel Use (English) Uso de canales (Espaol) Port Operations, VTS in selected areas Environmental (Receive Only). Introduction Appendix Channel Number Nmero de canal 14 15 15 16 17 18 18A 19 19A 20 20A 21 21A 21B 22 22A 23 66 English 1 watt CAN and INT 1 vatio Canad y Internac. 1 watt USA and CAN 1 vatio EE.UU. y Canad 1 watt CAN 1 vatio Canad 156.750 156.750 156.800 156.800 156.850 156.850 156.900 161.500 156.900 156.950 156.950 157.000 156.900 161.550 156.950 161.600 157.000 157.050 157.000 161.650 157.050 157.050 RX only 161.650 157.100 161.700 157.100 157.100 157.150 161.750 Canada (EPIRB Buoys Only); International
(On-Board Communication) International Distress, Safety and Calling State Controlled (U.S.A. Only) Port Operations, Ship Movement Commercial Port Operations, Ship Movement Commercial Canada (Coast Guard Only); International
(Port Operations, Ship Movement) Port Operations Port Operations, Ship Movement U.S. (Government Only);
Canada (Coast Guard Only) Coast Guard Only Weather Broadcasts Port Operations, Ship Movement U.S. and Canadian Coast Guard Liaison and Maritime Safety Information Broadcasts that are announced on Channel 16 Public Correspondence (Marine Operator) Operaciones portuarias; VTS en reas selectas Medioambiental (recepcin solamente). Usado por radiobalizas de localizacin de siniestros (EPIRB) clase C Canad (boyas de EPIRB solamente);
Internacional (comunicacin de a bordo) Llamadas, seguridad y solicitud de auxilio internacional Controlado a nivel estatal (EE.UU. solamente) Operaciones portuarias, movimiento de embarcaciones Comerciales Operaciones portuarias, movimiento de embarcaciones Comerciales Canad (guardia costera solamente);
Internacional (operaciones portuarias, movimiento de embarcaciones) Operaciones portuarias Operaciones portuarias, movimiento de embarcaciones EE.UU. (entidades gubernamentales solamente);
Canad (guardia costera solamente) Solamente Guardacostas Transmisiones Meteorolgicas Operaciones portuarias, movimiento de embarcaciones Enlace entre las guardias costeras estadounidenses y canadienses, y difusin de informacin sobre seguridad martima anunciada por el canal 16 Correspondencia pblica (operador martimo) Nothing Comes Close to a Cobra 67 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 68 VHF Marine Channel Assignments VHF Marine Channel Assignments Introduction Appendix Channel Map Mapa de canales Frequency Frecuencia Power Limits Lmites de potencia USA EE.UU. Intl nternac Canada Transmit Canad Transm. Receive Recepcin Channel Use (English) Uso de canales (Espaol) 157.200 157.250 RX only 157.300 157.350 157.400 161.800 161.850 161.850 161.900 161.950 162.000 RX only 162.000 156.025 156.075 160.625 160.675 156.075 156.075 156.125 160.725 156.125 156.125 156.175 160.775 156.175 156.175 156.225 160.825 156.225 156.225 156.275 160.875 156.275 156.325 156.275 160.925 Sea Tow ARC (Automated Radio Check) Sea Tow ARC (Automated Radio Check) Safety: Continuous Marine Broadcast (CMB) service by MCTS Canada Sea Tow ARC (Automated Radio Check) Sea Tow ARC (Automated Radio Check) Sea Tow ARC (Automated Radio Check) Safety: Continuous Marine Broadcast (CMB) service by MCTS Canada Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Port Operation, Ship Movement U.S. (Government Only); Canada (Coast Guard Only); West Coast (Coast Guard Only); East Coast (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement West Coast (Coast Guard Only);
East Coast (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations and Commercial, VTS in selected areas Public Correspondence (Marine Operator), Port Operations, Ship Movement U.S. (Government Only);
Canada (Commercial Fishing) Public Correspondence (Marine Operator), Port Operations, Ship Movement Port Operations Public Correspondence (Marine Operator), Port Operations, Ship Movement RMCAR (Chequeo Automatizado de la Radio) RMCAR (Chequeo Automatizado de la Radio) Seguridad: Transmisin Martima Continua (CMB) servicio por MCTS Canad RMCAR (Chequeo Automatizado de la Radio) RMCAR (Chequeo Automatizado de la Radio) RMCAR (Chequeo Automatizado de la Radio) Seguridad: Transmisin Martima Continua (CMB) servicio por MCTS Canad Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones EE.UU. (entidades gubernamentales solamente); Canad (guardia costera solamente); Costa occidental (guardia costera solamente); Costa oriental (pesca comercial) Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones Costa occidental (guardia costera solamente);
Costa oriental (pesca comercial) Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones Operaciones portuarias y comerciales;
VTS en reas selectas Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones EE.UU. (entidades gubernamentales solamente); Canad (pesca comercial) Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones Operaciones portuarias Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones Introduction Appendix Channel Number Nmero de canal 24 25 25B 26 27 28 28B 60 61 61A 62 62A 63 63A 64 64A 65 65A 66 68 English Nothing Comes Close to a Cobra 69 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 70 VHF Marine Channel Assignments VHF Marine Channel Assignments Introduction Appendix Introduction Appendix Channel Number Nmero de canal Channel Map Mapa de canales Frequency Frecuencia Power Limits Lmites de potencia USA EE.UU. Intl nternac Canada Transmit Canad Transm. Receive Recepcin 66A 67 68 69 70 71 72 73 74 75 76 77 156.325 156.325 156.375 156.375 1 watt CAN 1 vatio Canad 1 watt USA 1 vatio EE.UU. 156.425 156.425 156.475 156.475 RX only 156.525 156.575 156.575 156.625 156.625 156.675 156.675 156.725 156.725 156.775 156.775 156.825 156.825 1 watt Only Int. Slo 1 vatio Int. 1 watt Only Int. Slo 1 vatio Int. 156.875 156.875 1 watt USA and CAN 1 vatio EE.UU. y Canad Channel Use (English) Uso de canales (Espaol) Port Operations Operaciones portuarias U.S. (Commercial). Used for bridge-to-bridge communications in lower Mississippi River
(Intership Only); Canada (Commercial Fishing), S&R Non-Commercial (Recreational) U.S. (Non-Commercial, Recreational); Canada
(Commercial Fishing Only); International
(Intership, Port Operations, Ship Movement) Digital Selective Calling
(Voice communications not allowed) U.S. and Canada (Non-Commercial, Recreational);
International (Port Operations, Ship Movement) Non-Commercial (Intership Only) U.S. (Port Operations); Canada (Commercial Fishing Only); International (Intership, Port Operations, Ship Movement) U.S. (Port Operations); Canada (Commercial Fishing Only); International (Intership, Port Operations, Ship Movement) Port Operations (Intership Only) Port Operations (Intership Only) Port Operations (Intership only). Restricted to communications with pilots for movement and docking of ships. EE.UU. (comercial). Usado para comunicaciones de puente de mando a puente de mando en la parte baja del Ro Misisip (entre embarcaciones solamente); Canad (pesca comercial)
(transmisin y recepcin) No comercial (recreativo) EE.UU. (no comercial, recreativo); Canad
(pesca comercial solamente); Internacional
(comunicaciones entre embarcaciones, operaciones portuarias, movimiento de embarcaciones) Llamadas selectivas digitales
(las comunicaciones verbales estn prohibidas) EE.UU. y Canad (no comercial, recreativo);
Internacional (operaciones portuarias, movimiento de embarcaciones) No comercial (entre embarcaciones solamente) EE.UU. (operaciones portuarias); Canad (pesca comercial solamente); Internacional (comunicaciones entre embarcaciones, operaciones portuarias, movimiento de embarcaciones) EE.UU. (operaciones portuarias); Canad (pesca comercial solamente); Internacional (comunicaciones entre embarcaciones, operaciones portuarias, movimiento de embarcaciones) Operaciones portuarias
(entre embarcaciones solamente) Operaciones portuarias
(entre embarcaciones solamente) Operaciones portuarias (entre embarcaciones solamente). Restringido a comunicaciones con pilotos para el movimiento y atraque de embarcaciones. 70 English Nothing Comes Close to a Cobra 71 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 72 VHF Marine Channel Assignments VHF Marine Channel Assignments Introduction Appendix Channel Map Mapa de canales Frequency Frecuencia Power Limits Lmites de potencia USA EE.UU. Intl nternac Canada Transmit Canad Transm. Receive Recepcin Channel Use (English) Uso de canales (Espaol) 156.925 156.925 156.975 161.525 156.925 161.575 156.975 156.975 157.025 161.625 157.025 157.025 157.075 161.675 157.075 157.075 157.125 161.725 157.125 157.125 157.175 157.175 161.775 157.175 RX only 161.775 157.225 157.225 157.275 157.275 157.325 157.325 157.375 157.375 157.425 161.825 157.225 161.875 157.275 161.925 157.325 161.975 157.375 162.025 157.425 157.425 Public Correspondence (Marine Operator) Non-Commercial (Recreational) Port Operations, Ship Movement Commercial (Also Non-Commercial only in Great Lakes) Port Operations, Ship Movement Commercial (Also Non-Commercial only in Great Lakes) Port Operations, Ship Movement U.S. (Government Only; Environmental Protection Operations) Public Correspondence (Marine Operator), Port Operation, Ship Movement U.S. (Government Only); Canada
(Coast Guard Only) Canada (Coast Guard Only) U.S. (Government Only); Canada
(Coast Guard Only) Coast Guard Only Weather Broadcasts Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Marine Operator) Public Correspondence (Ship to Coast). In U.S. only within 75 miles of Canadian Border. Commercial Intership only Correspondencia pblica (operador martimo) No comercial (recreativo) Operaciones portuarias, movimiento de embarcaciones Comercial (en los Grandes Lagos tambin no comercial) Operaciones portuarias, movimiento de embarcaciones Comercial (en los Grandes Lagos tambin no comercial) Operaciones portuarias, movimiento de embarcaciones EE.UU. (entidades gubernamentales solamente;
operaciones de proteccin medioambiental) Correspondencia pblica (operador martimo), operaciones portuarias, movimiento de embarcaciones EE.UU. (entidades gubernamentales solamente);
Canad (guardia costera solamente) Canad (guardia costera solamente)) EE.UU. (entidades gubernamentales solamente);
Canad (guardia costera solamente) Solamente Guardacostas Transmisiones Meteorolgicas Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (operador martimo) Correspondencia pblica (entre embarcacin y costa). En los EE.UU., solamente dentro de los casi 121 kilmetros (75 millas) de la frontera canadiense Comercial entre embarcaciones solamente Introduction Appendix Channel Number Nmero de canal 78 78A 79 79A 80 80A 81 81A 82 82A 83 83A 83B 84 84A 85 85A 86 86A 87 87A 88 88A 72 English Nothing Comes Close to a Cobra 73 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 74 Weather Channel Assignments Introduction Appendix Weather Channel Assignments Asignaciones de canales meteorolgicos Channel Number Nmero de canal RX Frequency MHz Frecuencia de recepcin (MHz) Weather Channel Weather Channel 1 2 3 4 5 6 7 8 9 10 162.550 162.400 162.475 162.425 162.450 162.500 162.525 161.650 161.775 163.275 NOAA NOAA NOAA NOAA NOAA NOAA NOAA Canada Canada NOAA VHF Marine Channel Assignments Introduction Appendix VHF Marine Channel Assignments (English) NOTE Many of the plain-numbered channels, such as 01, 02 and 03, transmit and receive on different frequencies. This is termed duplex operation. The rest of the plain-numbered channels and all of the A channels, such as 01A, 03A and 04A, transmit and receive on a single frequency, which is termed simplex operation. Your radio automatically adjusts to these conditions. When in simplex operation, the A icon will appear on the LCD (see illustration on page A3). NOTE All channels are preprogrammed at the factory according to international regulations and those of the FCC (U.S.A.) and Industry Canada (Canada). They cannot be altered by the user nor can modes of operation be changed between simplex and duplex. Asignacin de canales de VHF para radiocomunicacin martima (Espaol) NOTA Muchos de los canales de nmeros simples, como 01, 02 y 03, transmiten y reciben en diferentes frecuencias. A esto se le llama operacin dplex. El resto de los canales de nmeros simples y todos los canales A, como 01A, 03A y 04A, transmiten y reciben en una sola frecuencia, a la que se le llama operacin simple (simplex). Su radio se ajusta automticamente a estas condiciones. Cuando est en operacin simple, el icono A aparecer en la pantalla de cristal lquido (vea la ilustracin de la pgina A3). NOTA Todos los canales vienen programados previamente de fbrica conforme a los reglamentos internacionales y a los de la FCC (EE. UU) e Industry Canada
(Canad). No pueden ser alterados por el usuario, as como tampoco pueden cambiarse los modos de operacin entre simple y dplex. 74 English Nothing Comes Close to a Cobra 75 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 76 Introduction Introduction Accessories Optional Accessories Accessories Your Cobra radio has several optional accessories available to enhance the use of the radio. Some are listed below:
Introduction Accessories Belt Clip Optional Accessories Belt Clip Replacement Belt Clip P/N CM 240-003 Alkaline Battery Tray Alkaline Battery Tray A special alkaline battery tray (P/N CM 110-024) is available as an optional accessory to have as an emergency backup. By using five (5) high-quality AA alkaline batteries, you can have a spare battery backup source for your radio. Lapel Speaker/Microphone LiON Battery Pack NOTE Alkaline batteries are not rechargeable. Lapel Speaker/Microphone A speaker/microphone that attaches to your lapel, by ordering P/N CM 330-001. This unique accessory allows you to wear the radio on your belt while still being able to communicate with other vessels. A small Push to Talk (PTT) button on the lapel speaker/microphone allows you to answer any incoming call. LiON Battery LiON replacement battery (P/N CM 110-026). Can be used with the charger included with this radio. Antenna Antenna Replacement Antenna P/N CM 300-002 AC Charger AC Charger Replacement AC Charger P/N CM 120-005 DC Charger DC Charger Replacement DC Charger P/N CM 130-005 Drop-In Battery Charger Drop-In Battery Charger Replacement Drop-In Charger P/N CM 110-030 76 English Nothing Comes Close to a Cobra 77 500_VHF_Body_v8_MRHH330_ENG_Body 1/18/13 3:17 PM Page 78 Notes Introduction Accessories Left blank intentionally for your notes
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2013-02-15 | 156.025 ~ 157.425 | TNF - Licensed Non-Broadcast Transmitter Held to Face | Original Equipment |
2 | 2402 ~ 2480 | DXX - Part 15 Low Power Communication Device Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2013-02-15
|
||||
1 2 | Applicant's complete, legal business name |
Cobra Electronics Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0004374997
|
||||
1 2 | Physical Address |
6500 West Cortland Street
|
||||
1 2 |
Chicago, IL
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@TIMCOENGR.COM
|
||||
1 2 | TCB Scope |
B3: Maritime & Aviation Radio Services equipment in 47 CFR parts 80 & 87
|
||||
1 2 |
A2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
BBO
|
||||
1 2 | Equipment Product Code |
MRHH500
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
C**** d********
|
||||
1 2 | Title |
Senior Project Engineer
|
||||
1 2 | Telephone Number |
773-8********
|
||||
1 2 | Fax Number |
773-8********
|
||||
1 2 |
C******@cobra.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | TNF - Licensed Non-Broadcast Transmitter Held to Face | ||||
1 2 | DXX - Part 15 Low Power Communication Device Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MARINE TRANSCEIVER | ||||
1 2 | BT ACCESSORY IN MARINE RADIO | |||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Listed Output Power is conducted. This device must operate with a duty factor not exceeding 50%. Body-worn compliance is limited to the specific belt-clip tested for this device to comply with appropriate spacing as indicated in the filing. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the SAR limits and requirements. The highest reported SAR values are - Head: 0.30 W/kg; Body-worn: 0.63 W/kg accounting for a 50% duty cycle. Power output is selectable from 1, 3 or 5 Watts. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Timco Engineering, Inc.
|
||||
1 2 | Name |
B**** C******
|
||||
1 2 | Telephone Number |
352-4********
|
||||
1 2 | Fax Number |
352 4********
|
||||
1 2 |
b******@timcoengr.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 8 | EF | 156.025 | 157.425 | 5 | 9.31 ppm | 16K0G3E | |||||||||||||||||||||||||||||||||
1 | 2 | 8 | EF | 156.025 | 157.425 | 5 | 9.31 ppm | 16K0F3E | |||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC