RT-300 RTLS Tag Cgnosos, Inc. 1100 Spring Street NW Suite 300A Atlanta, GA 30309 RT-300 RTLS Tag The Cognosos RT-300 RTLS Tag is a battery powered device that senses when an asset is moved and transmits its location into the RadioCloud network. With its modular design and smart beacon software, the RT-300 provides an economical solution to a wide variety of asset tracking problems for healthcare, retail and manufacturing. Every tag transmits its unique ID and location information after movement events. By using the patented RadioCloud signal processing architecture, transmissions require very little power but can be accurately received up to hundreds of feet away by a RadioCloud Gateway and reported to the users application via an API. Gateways can cover up to 100,000 square feet indoors. The RT-300 uses low cost BLE beacons installed in ceilings, parking decks and similar structures to determine its location. Location accuracy of 3 meters or better can be achieved in most structures depending on the number and location of beacons. An easy to install cradle can be attached to most flat plastic or metal surfaces with double-
sided tape or cable ties. An internal coin cell battery can be easily replaced by simply removing the tag from the cradle with a supplied security tool and removing a single screw to access the battery. Operating Frequency Average transmission power Battery Life Sensors Messages Regulatory Dimensions Weight Security Material Operating Temperature Storage Temperature Operating Humidity Moisture and Dust Ingress Disinfection Battery 902 928 MHz, 2400-2480 MHz
< 1 uW Up to 3 years Internal accelerometer, temperature and BLE beacon Location upon motion, low battery and tamper FCC/IC Part 15 2.5 x 1.5 x 0.5 inches 1 oz Tamper alert when removed from cradle ABS 0 C to +60 C
-25 C to +60 C 0 to 100%, non-condensing Splash resistant Resistant to quaternary ammonium cleaning Customer replaceable internal coin cell sales@cognososo.com www.cognosos.com This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two (1) This device may not cause harmful interfer-
ence, and (2) this device must accept any interference received, including inerference that may cause undesired operation. WARNING: changes not expressly approved by the party responsible for compliance could void the users authority to operate this device. WARNING: a 20cm separation distance must be maintained between this device and the user. This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement.