all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 3.41 MiB | ||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | External Photos | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Internal Photos | |||||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Attestation Statements | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | RF Exposure Info | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Setup Photos |
1 2 3 4 | User Manual | Users Manual | 3.41 MiB |
STAR 4 Manual de Usuario SAR This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
---Reorient or relocate the receiving antenna.
---Increase the separation between the equipment and receiver.
---Connect the equipment into an outlet on a circuit different from that to which the receive is connected.
---Consult dealer or an experienced radio/TV technician for help. Body-worn Operation This device was tested for typical body worn operations. To comply with RF exposure requirements, a minimum separation distance of 1.5cm must be maintained between the users body and the handset, including the antenna. Third-party belt-clips, holsters, and similar including the antenna. Third-party belt-clip, holster, and similar accessories used by this device should not contain any metallic components. Body worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Specific Absorption Rate (SAR) information:
This wireless phone meets the governments requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6W/kg averaged over one gram of tissue. Device type: STAR 4 (FCC ID: GAO-STAR4) has also been tested against this SAR limit. The highest reported SAR values for head, body-worn accessory, and product specific (Hotspot) are 0.52 W/kg, 0.85 W/kg, and 0.87 W/kg respectively. The Max simultaneous SAR is 1.06 W/kg. This device was tested for typical body-worn operations with the back of the handset kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the handset. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. More info visit our website:
www.smoothmobile.us User Manual 1. APPEARANCE AND KEYPAD OPERATIONS ................................................................................. 3 2. USING MEMORY CARD AS U DISK............................................................................................. 3 3. WIFI
..............................................................................................................................................3 4. BLUETOOTH .............................................................................................................................. 4 5. MAIL ..............................................................................................................................................4 6. DIALLING .................................................................................................................................. 5 7. MESSAGING ............................................................................................................................... 6 8. CONTACTS ................................................................................................................................. 6 9. BROWSER .................................................................................................................................. 6 10. SOUND RECO ........................................................................................................................... 7 11.CLOCK.............................................................................................................................................7 12.CACULATOR ............................................................................................................................. 7 13. CAMERA .................................................................................................................................. 7 14. GALLERY ................................................................................................................................. 8 15. MUSIC.............................................................................................................................................8 16. CALENDAR .............................................................................................................................. 8 17. FM RADIO ............................................................................................................................... 9 18. SETTINGS ................................................................................................................................ 9 19. NOTICES FOR THE USE OF PHONE ........................................................................................... 12 1) Appearance and Keypad Operations Keys home menu back power up down Functions 1) 2) Press this button to return home from any application or interface. Press it to open recently opened application window. Press it to start the menuwhich allows you to perform actions in the current interface or options menu. Press it to return to the previous interfaceor to close dialog box options menunotification panel or the keypad. Press it to open the phones menuthen you could choose to lock the screenturn off the phoneor set it to the silent mode . Press it to increase the volume Press it to turn the phone to vibration mode from the silent mode. Press it to decrease the volume. 2. Using Memory Card as U Disk If you want to send music, pictures or other files to the phones memory card from the computeryou should set memory card as u disk first. Set memory card as u disk1Connect the phone to the computer with USB cable. The notification icon will appear in the status box. 2Open the notification panel.3 In the notification panel, touch USB is connected then touch Open the USB Storage Device .NoticesIf you connect your phone to the computer then choose open the USB device, the phone cant read the memory card. You temporarily cant use some applications, such as camera. Uninstall the U Disk from computerThe same as the method of connecting itsee the following picture 3. WIFI Wi-Fi provides as far as 300feet (100M) range of wireless network access. If you use cell phone to connect WIFI, you should connect to the wireless access point or hot spots.NoticesThe availability and coverage of Wi-Fi signal depend on the number, infrastructure and other objects penetrated by the signal. Open Wi-fi and to connect to the wireless networkPress home>menuthen touch settings> WIFI and internet Select the wi-fi boxto open Wi-Fi. Phone will automatically scan for available wireless networks. Touch Wi-Fi settings. Then a list of Wi-Fi network will show the founded network name and security settings. (open network or WEPWPA/WPA2 with password).If you enable the notification in WIFI settings, the status box will show this icon (
) when open available wireless network founded. Touch one of the Wi-Fi choices to connect the network. When you choose open network, phone will connect to it automatically. If you choose WEPWPA/WPA2 with password, you should type the password first, then touch to connect it. Noticeswhen the phone is connected to the wireless network, Connect to other Wi-Fi networksIn the interface of wireless and network, touch Wi-Fi settings. The founded Wi-Fi networks will show on the Wi-Fi network list. Touch other Wi-Fi networks, and then you can connect to this network. Noticesin addition, you can surf the internet via GPRS. We default that the GPRS in SIM1 is opened after started, users can select manually ,the specific location is settings>wireless and internet>data connectiontouch SIM1SIN2no data connectionwhen the dot turns green, its already opened. 4. Bluetooth Turn on Bluetooth or set the phone can be detected Press home>menu, the touch settings. Touch wireless and internet, then choose Bluetooth box to open the Bluetooth function. After started, the status box will show this icon (
). Touch scan for devices the it starts to scan for all devices within range. Touch Bluetooth settings, all the devices founded will display in the list under the icon. select the box can be detected, set it to be detected, the other Bluetooth devices will be able to find the phone. importantthe maximum detecting time of the phone is 2 minutes. Pairing and connection of Bluetooth headset1) Press home>menu, then touch settings.2)Touch wireless and internet>Bluetooth settings, then select Bluetooth box, then your phone will scan for the Bluetooth devices within range ,and show the founded devices in the list under the icon. Tips; If the list cant find your equipment, touch scanning equipment to re-scan it. Make sure that the devices wanted are under the detected mode. Touch headset in the equipment list to finish the connection. Notices: generally Bluetooth devices need password to be paired, often use0000as the default password.4)The pairing and connecting status will show under the headset in the Bluetooth devices list. When the headset connected to your phone, the status box will show this icon means connected. Then you can use the headset to make or receive callings.. Cut the connection to the Bluetooth; Press home>menu>settings>wireless; and; internet>Bluetooth settings. In the list of Bluetooth equipment, touch or tap and hold the connected hand-free headset. Press and select cancel the pairing .Bluetooth proximity sensor After pairing the two device, you can test out the signal is strong or weak by the Bluetooth proximity sensor device 5. Mail Load EmailEnter the correct address and password >settings correct port and POP server, check the server settings automatically. Set the correct SMTP server, check the mails servers sending and receiving settings, then enter the specified account name and displayed name on the outing e-mail.> Finish. Create and send mailsWhen creating mails, select mails > create mails. Enter the address(recipient)theme and contents. Press MENU you could appendAdd Cc/Bcc, select send or discarded or save as draft. 6. Dialing When the icon of internet server appears in the screen, you could dial or receive callings. The signal bar on the top right corner show the strength of network signal (the maximum with 4 signal bars) .Start dialing Open applications main menu>dial. You could choose SIM1 or SIM2 to do the dialing. DialingAt the interface of dialerenter the phone numberand then click the dialing key , after that, you should choose one SIM card or internet call. If needed to call the extension, you could click the dial pad in the bottom of the screen to open the interface or press menu key to select delay 2 secondsand then enter the number of the extension. Telephone calls in the call logEvery telephone number called and received inSIM1SIM2will reserved in phones menu of call log. On the top left of every call record will show SIM1 or SIM2All numbers in the call log can be dialed by clicking the button dial on the right side of the screen. When number list appearingclick it to catch detailspress it for long you could dial via SIM1 or SIM 2meanwhile you can edit, delete, save the number or do other operations. Receive callings/When calling comestop left will show from which SIM cardpress Answer and slide towards right until the middle button, then you can receive callings. Proximity sensor/According to the distance between phone and human bodyit will adjust automatically the switch of the backlight .During the call, close the phone to the ear, the backlight will turn off automaticallywhich could save batteries and prevent inadvertently touching. Refuse to answer the phone/When standby, calling comespress refuse button and slide towards left side until the middle button, then you could refuse the calling./When using, calling comes, click on the refuse button to refuse the calling. Two-way call/multiparty call (conference call) Noticesthis function needs that SIM card open multiparty call features. Already exist a call in the phoneClick Add callsdial another call or receive another callphone default open call waitingsettingsdialing settingsother dialing settingsafter both connectedcould view the status of calling. Select combine call you can combine two calls into one way. after multiparty call connected you could separate the calls or hang up one of them via the small arrow of conference call. Telephone recordingDuring the callmore>start recordyou could record the dialog of the call. 1settings>set other functions of the call in the dialing settingsfor exampleCall Transfer after all the settings finished and turned onyou could transfer the call to a certain number.2In settings>dialing settings >other dialing settingsopen call waiting. After turned onyou can receive another call when already exist oneThe answering and rejecting functions are just like the ordinary phone 7. Messaging Important: the message title of this phone is the phone number, will be reserved in s similar for of dialog, instead of the usual folder structure. Messages with blue background are those received, and messages with white background are those sent. Send SMS to certain phone number Press home>messaging, touch new messages. In the interface of edit :Click recipient box to start input method, you can also click enter box to start input method, in that way you can enter characters. Click the button of send from SiM1 or SIM2to start sending. Send MMS to certain phone number, When creating message it was defaulted as SMS, it will be turned to MMS when following operations were done. You can send MMS via clicking send after editing. In the interface of edit, Click the button of Menu: Click append, you can spend the following attachments, then it will be turned to MMS automatically. Send messages to multiple numbers Enter multiple numbers in the box of entering, each number is divided by the comma in English. Notices; For now this phone can mass messages to almost 20 numbers, the correct number depends on the characters, you can only enter 312 characters in the box of recipient .When a message is sent or sent again a little yellow letter will appear. The number 1 or 2 on the letter refers to SIM1 or SIM2. When message sending failed, a red triangle with exclamation will appear. when editing information other functions of Menu button 8. Contacts Open the menu of applications>contacts Default display phone contacts and SIM card contacts, sort contacts by first letter of alphabet. Click the Search icon to enter the contact search interface Click the "+" to create new contact1contacts>Menu>new contact> Select Save contacts to phone or SIM card ,then into the interface of editing contacts You can edit the contacts picture, name, phone number, e-mail, postal address, then touch finish.2) contacts>Menu>searcher a. Enter numbers or letters, if match with contacts ,they will be displayed in the search results. If there is no search to match the contacts, the interface will be 'no matching contacts. 3) contact>Menu>delete contacts a. You can select all, click the delete button to delete all contacts, including the contacts of phone and SIM card b. You can select one or more individual contact, click Delete, delete all the selected contacts. 4) contacts>Menu>groups a. default group include: VIP, Schoolmate, friends ,Family, Co-worker. b. Select Add Groups, edit the new group name, and go to the contact search interface, you can add the group contact. 5) contacts>menu>speed dial a. Voicemail b. No.2-9numbers,clickTap to add speed dial, select a contact as a speed dial. After successfully setting the dialer interface, long press the number keys, you can dial the contact number. 6) contacts>more a. click import/export, In the local phone, SIM card and SD card three copies of each other to achieve contact information. You can select "Copy Source" and then select Next, select the contacts to copy, so shat complete the copy of contacts. b. Display options, can select the whole or parts contacts in Only contacts with phones ,Phone Contacts or SIMs Contacts c. Accounts, can choose the Background data and Auto-sync. d. Share Visible contacts, all of the contacts can be imported into the SD card, or sharing via Bluetooth ,Text message Gmail. Add common contacts to the collection interface. 1 Touch contact tab.2 Touch the contact that you want to add to the collection contacts reserved on the SIM card can not be added.3In the detailed information of contacts, touch this icon besides the contact.4 Press for long the contact in the pop-up menu to add it to the collection. The interface of contacts>press Menu button>select search a Enter the first letter of the names in the list(Chinese or letter) to find the matched contact. b Enter the first number in the searching box to find contacts named under numbers. c Enter the exactly matched numbers with contacts in the searching box, then press the search button. d If there is no matching contact, then the interface will appear no contact founded 9. Browser Internet explorer1)In the interface of internet explorertouch address filed and enter the URL.2)Use keypad to enter URL. The appropriate web sites will appear on the screen. You can touch it directly go to the page or continue to enter URL. HomepageSelect homepageyou could load in the set homepage. If you do not set it, you will use the vendors pre-set sites. Functions of menuMenu>BackwardAfter browsing through multiple pages, will return to the previous page the current page. Menu>Forward, After browsing through multiple pages, will move to a web page after the current page. Menu>WindowsYou can view all open windows to the current .Menu>BookmarksClick the Bookmarks to make the current URL as a bookmark saved. Click the bookmark under the bookmarks list, will open the URL. Menu>More Add bookmarks, save the current URL as bookmark. Find on page, search what you need in current page. Select text, in the text, click and drag to select a piece of text Page info, display page address and other information of the current browsing. Share page, select the Bluetooth or SMS to share the current page. Downloads, show all the content downloaded. History, show your browsing history, and view the most visited pages of information. Setting, contains a variety of browser settings. 10. Sound Recorder Recorder can record voice, and send it quickly via Bluetooth or MMS as well as make it as ring tone.Noticesrecorder can only save the audio files as AMR format.1) Click the recorder application.2) Keep the phones microphone near the voice source.3) Click recorder to record voices ,and click to stop or playback. All recordings save in my recording folder in the default music program. 11.Clock Open the menu of application, click Alarm After functions setphone will arrives in the setting time to alert you by ringing or vibrating to achieve its function. Press Menu to add alarmyou can also add it from the adding interface. You could set the alarm according to your needs. In the interface of alarm will show three closed alarmstwo alarm clocks are Monday to Friday 8:30,9:00.Edit You can edit the current alarm you could edit timeringing tonesvibrationrepeat form and tabs. Press for long the time you couldstop the alarmchange alarm settingscancel alarm. In the interface of alarm settings, you could perform the operations of changing timerepeat ring tonesvibrationtabs, etc. 12.Caculator this function can turn your phone into calculator it can do some simple calculations. Touch the number keys to make it appear in the blank box.in the interface of calculator, press MENU button or hold down the screen to the left, then the senior panel appears. 13. Camera Prior preparationInstall memory card before using the camera or video camera. All your photos or videos taken by the phone are stored in memory card. Open cameraPress home, touch menu, select camera. Choose the video mode if you want to make videos. The screen will automatically switch to landscape mode. Take pictures Aim your object with the screen. Touch the shutter button on the screen. After takingphotos will save to the cameras galley folder with the name of taking time. You can view the photos by touching the preview box button. Camera settingsYou can touch the button of set in the interface of camera to do the settingsUnder camera viewfinder mode, press Menuyou can switch to video or photos gallery. On the top right of camera viewfinder mode, display the preview of the previous picture. Touch preview box, the photo display on full screen and you can enlarge it to view details. Camera settings: button 1Focus mode, exposure, framing mode, picture size, picture quality, color effect. button 2Camera mode, high-speed continuous shooting, ISO sensitivity, self-timer, focus mode, face recognition, metering mode, to avoid flicker, sharpness, hue, saturation, brightness, contrast. button 3Storage location .button 4White balance. button 5Flash mode. button 6 Zoom. Touch set button, you can do settings in the camera. 13.2 Video cameraPrior preparation Install memory card before using the camera or video camera. All your photos or videos taken by the phone are stored in memory card. Open camera Press home, touch menu, select camera. Choose video camera mode. The screen will automatically switch to landscape mode. Take pictures Aim your object with the screen. Touch the shutter button on the screen. After takingphotos will save to the cameras galley folder with the name of taking time. You can view the videos by touching the preview box button. Video camera settings You can touch the button of set in the interface of camera to do the settings Under camera viewfinder mode, press Menuyou can switch to video or photos gallery. On the top right of camera viewfinder mode, display the preview of the previous video. Touch preview box, the video will display on full screen and you can touch the play button to view it. Video camera settings button 1Focus mode, anti-focus, exposure, framing mode, video quality, video length, color effects. button 2Voice recording, avoiding flicker, sharpness, hue, saturation, brightness, contrast, camera .button 3 White balance button 4Flash mode button5Zoom. Touch set button, you can do settings in the camera. 14. Gallery Open Gallery Press home, touch label of applications, then touch photos gallery. In the interface of camera, Press menu to open it, then touch to operate. Use images After taking pictures, you can view them and share them with your friends. View images1) In the picture interface, touch photo album to view images.2) Touch the thumbnail to view pictures on full screen. You can choose to display small or large thumbnails. Hold down the screen towards the left side to view the next photo or towards right to view the previous one. In the photo album or list, press and hold down the picture towards left to view the next picture, or towards right to view the previous one. Crop images In the photos gallery, press the photo you want to crop, choose menu more and crop, then the instruments of cropping will appear. a. To adjust the trimmer size, press and hold the edge of cutting tool. After the trimmer arrow appears, drag your finger from the center inward or outward, then you can adjust the size .b. To keep the ratio of the trimmer, please press any one of the four corners. c. To move the trimmer to other areas of the picture, hold down the center of cutting device, then drag your finger to certain position. Send images via mails In the images gallery, press the wanted photo, choose menu, then touch share. Touch Gmail when tips appear. Picture will be automatically attached to e-mail. Edit the mail, then touch send. Send images via messages In the images gallery, press the wanted photo, choose menu, then touch share. Touch Gmail when tips appear. Picture will be automatically attached to message. Edit the mail, and then touch send. Use videos After video taken, you can view it or share it with your friends. Watch movies1) In the interface of photos gallery, touch videos album. You can watch movies after touching the wanted video.2) Touch the screen, then the play control keys appear. 15. Music The phone can play digital audio files in memory card. The following formats are available :AMRM4AMIDIMP3WAVOGG. Open Music Press home, touch the label of applications, touch music. Then the interface of Music Media appears. Music Media Your music files are classified according to the following four categories; Artists, albums, songs and play lists. Touch one of these categories; you can view the list inside. Continue the operations, until your wanted music appears. Such as. if you choose Artists a list of artists sorted by the numbers in English will appear. Choose any on to open the list, then all the albums and songs will appear. Select one album, then the songs in it will be played. Tips: You can play all of the songs in the interface of music media, in random sequence . Press Menu, and then touch the Party Shuffle. Then will start playing the first song randomly selected . To close the Party Shuffle, press Menu, then touch to turn off the Party Shuffle.View lyrics When the corresponding tracks have lyrics file, the player displays the lyrics sources. Click the up arrow, you can play music, view lyrics at the same time.Create a play list Touch any category of music media on the screen. In the list, you can press and slide up and down the screen to browse the artist, album or song that you want to add to the play list. Press the artist, album or song, and then touch the options menu in the play list. In the interface of adding to the play list window, touch the new play list. Enter the new name of the play list, and then touch to save. Manage the play list Enter the interface of music media then touch the play list. To play songs of the play list, touch the name of play list. To delete a play list, press and hold the Play list, and then touch Remove. To refresh the list of songs or remove songs, hold down the play list, and then touch the options menu in the editor. To delete the list of songs, hold down the songs, and then touch play list to delete it. To rename a play list, press and hold the play list, then touch Options menu renamed. Enter the new play list name, and then touch save". If you want to set the song to the ring tones, and then touch the song as a ring tone. The song will be set as the default ring tone. if you want to use the song as notice ringtone, you can press menu and touch the song as ringtone. and then touch the Notice ringtone. The song will be set as the notice ringtone .if you want to cut the song to the ringtone, you can press the menu and select the song as ringtone, and then touch the cut ringtone. As shown, you can choose the start time and the end time, at last touch the save, it will be saved to ringtone. It can be set to the default ringtone, can be assigned to the contact as the ringtone of the contacts. 16. Calendar Enter the calender application Load Goggles accounts, enter the application, In the interface of month or week will use gray to highlight the day. Display default the date on the current month.In the interfacepress menu4 display modes will appear 1) Schedule Intrface shows a certain schedule(click on the initial time and view forward,click the final time to view backwards ) 2) day Interface displays a day's schedule (last clicked date),Slide around to turn page accoring day.3) week Interface displays a week's schedule (last clicked date),Slide around to turn page accoring week.4) today Interface displays a day's schedule, In the interface of month or week use gray to highlight the day.5) month nterface displays a month's schedule (last clicked date) Slide around to turn page accoring month.New activitiesPress menu, more < touch new activities.Enter the name of activity in the activities box.NoticesSuch as special occasions such as birthday or a day with events, set the all-day option to Yes. If the activity is at a certain time period, select the start time and end time.3)Enter the event location, description, guests, repeat, remind time.4) Click finish to return to calendar.NoticesAll-day events appear in the calendar heading. It will not show the period of calendar. Cancel activitiesIn the time frame, press for long to delete the activity. 17. FM Radio FM Radio Through this program, you may listen to FM radio on the device, FM radio use the wired headset as an antenna to receive signals, before opening this program, you can install the original equipment-headphones, when listening, you can switch it manually to speakers or the mode with wired headphones. Open FM radio Touch this label to open the application of FM radio. Click the Back button, the radio program move to the background, and you can still continue to listen to programs and other applications run at the same time. Press menu and click interface, click the search & save, and then view the channel list, press long one channel, click Add to Favorite to rename the channel. to select exit radio. Collect the channel you are favorite Press the menu button in the FM 18. Settings Your service provider may default some device settings, so you may not be able to change these settings. SIM card management 1) Touch it to choose or to disable the SIM card, the card is grey when disabled, the flight mode displays on status bar.2) The default SIM card, you can choose Voice call, Video call, Messaging, Data connection. to open Wireless and internet Flight mode Touch to open or close. Wi-Fi and Wi-Fi settings Touch Wi-Fi
. Open Wi-Fi ,it can search for available networks automaticallynetworks without password can be used directly, others need to enter the password first. Notice:
Open Wi-Fi then the flight modeWi-Fi will close automaticallyOpen flight mode then connect Wi-Fiit can be used normally. WPS connection, wireless AP and mobile phone are needed to support AOSS, you can directly connect without entering a key. Bluetooth and Bluetooth setting. Tethering & portable hotspot Share your digital data via USB Virtual Private Networks(VPN) Settings. Mobile network enter mobile network settings which include a Data roaming b Access pint name c Network operators, GPRS transfer prefer Calling settings Voice Call Voice mail, in the voice settings, you can enter the voice mail number. Call forward, You can set Always forward, Forward when busy, Forward when un-answer, Forward when unreachable. Call barring Additional settings, Call ID and Call waiting Video Call Picture for replacing local video, set a picture to display when camera off use. Enable back camera, available to switch cameras if turn off. Peer video bigger than local video, turn on to make peer video bigger than local video Local video display, to make outgoing video call or incoming video call. Other settings, include call forward, call barring, additional settings. Internet Call Can add accounts Other settings, Fixed Dialing Numbers Call cost Cell broadcast Minute reminder Phone settings TTY settings Extra settings Applications allow application moving or select install location Display animated, rotating, Input behavior, button Interface adjust interfacecross border Audio profiles This option gives the phone tones settings under the status of receiving calls or notification. IncludingVibration, volume, ring tones, ring tones notification and feedbackButton operation tone, select Sound, screen lock tone, touch.To adapt every environment. Select Standard / Mute / Conference / OutdoorTouch the spot on the right, when turns green ,it opens. VolumeIncluding the ring volume and alarm clock settings, you can manually slide to select. Displays Brightness Adjust the brightness b. Auto rotating screen Rotate phone to change direction Animation. Choose to display animations d. Screen Timeout Adjust the delay before the screen automatically locks Location Use wireless Use wireless to find locations in the applicationGoogle map. Touch it to open or close When using the GPS satellite positioning, set accuracy to street level (cancel it to save battery). Touch it to open or close GPS EPO assistance, use GPS assistance data(EPO)to speed up GPS positioning A-GPS Use auxiliary data can accelerate the process of GPS positioning. Open it and remind you it produce GPRS flows when using AGPS .safety Set up screen locks Use imagesPIN or password to lock the screen. a. Touch images, the first time there will be a simple unlock instructions and examples, click next step to continue the step make the unlocking image. Touch PIN Enter PIN numbers to unlock the screen. c. Touch password Set password to unlock the screen Touch no Stop this application.2) Set up SIM card lock Enter 4-8numbersPIN to set the lock of SIM.SIM card PIN (Personal Identification Number) is to prevent unauthorized use of SIM cards. PIN code provided with SIM. The service provider gives the initial value. Change a blocked PIN code, you need to open the "SIM Lock ", then go to Change Password screen, the phone will automatically prompt enter the old PIN code and asked to enter a new PIN code twice, finally the phone will prompt that change the code successfully. If you enter the PIN with error for three times, SIM card PIN codes will be automatically locked, PUK codes is usually supplied with SIM card. If no, you should go to the service provider for the codes. If you enter 10 times wrong PUK code, the SIM card will be permanently locked. 3) Password visible Password visible when enter it4) Select device administration Add or delete device manager.5) Use security credentials Allow application visit security credentials or other credentials.6) Install from SD card Install the encrypted certificate from SD card. 7) set password Set or change Certificate store password 8) clear storage Clear all the contents of the certificate store and reset their passwords Applications 1) Unknown sources Allow to install non-electronic market applications2) Manage applications Manage and delete the installed applications.3) Running services Touch any of the services listed in> pop up 'to stop the service? 'two-button operation box, touch the 'Stop 'the service is stopped, and disappear from the "running services" list.4) Storage use you can view the program of downloaded all, on SD card or running how many memory space they occupy 5) Battery use you can see the using power situation of cell Standby, phone idle, display and Browser.6) development a. USB debugUSB debug only apply in the develop process. This function allows copy data in computer and mobile devices. Accounts and Synchronize1) Background data Applications using the background data synchronization at any time, send and receive data, disable the background data extend battery life and reduce data usage. However, some applications will use the background data for the connection.2) Automatic synchronization turn on/off Automatic synchronization, applications Automatically synchronize data or asynchronous data Privacy Backup My Data Backup my settings and data of other applications. Restoring Automatically The system will restore settings or other backup data after a certain application is Installed. Resetting to Factory Settings Clear all data stored on the phone. Storage 1) View SD Card and Phone Memory.2) Uninstall or Format SD Card. Languages and keyboard 1) Selecting Language District Include all the languages on the phone and totally amount of 12 kinds. 2) User Dictionary Add words to custom dictionary or delete.3) Keyboard Settings Vibrating when buttons are pressed, playing sound when buttons are pressed, capitalizing automatically, Speech Input (by microphone on the keyboard), Inputting words (speech can be altered by sliding finger on space key), Displaying Tips (activate predictive function when you input words); Auto-Text (Automatically input certain words when press space key or specified keys)4) Input method you can select Android keyboard or google pinyin input method. Speech Input and Output Settings 1)Voice recognizer settingsLanguage select the default language Safe Search only applies to Google search by voice Block offensive words hide recognized offensive voice results Test-to-Speech Conversion Setting Listen to an example play a short demonstration of speech synthesis Always use my settings default setting below override application settings Default Engine sets the speech synthesis engine to be used for spoken text Install voice data install the voice data required for speech synthesis Speech rate speed at which the text is spoken Language sets the language-specific voice for the spoken text Pico TTS Auxiliary Function 1)End up calling when you press power key on/off 2) Quick boot Date and Time 1) Automation Use date and time provided by Network.2) Setting Date Touch + and - to set date. 3) Selecting Time Zone Select Time Zone according to where you are. For China please select GMT+08:00, China Standard Time. 4) Setting Time Touch + and - to set time. 5) Use 24 Hour Time Format ON/OFF 6) Select Date Format There are 3 kinds of formats you can choose from: Month-Day-Year, Day-Month-Year and Year-Month-Day, among which Year-Month-Day is the default setting. schedule power on/off. You can set time of boot or shut-down by touching it. You may also select to repeat it or a certain day during a week. about phone You can check the information on status bar and remaining power. 19. Notices for the use of phoneYour phone is a product of superior design and craftsmanship and should be treated with care. The following suggestions can help you comply with the terms of repair kits, to extend the life of mobile phone.Place the mobile phone and their parts and components out of reach of small children.Keep the phone dry, rain, humidity and all types of liquids which contain minerals will corrode electronic circuits.Dont touch the phone with wet hands when charging, it will cause electric shock or damage the phone.Avoid place the device in high temperature environment. Temperatures will shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.Avoid place the device in too low temperature environment. When the temperature rises, the phone will produce water vapor that may damage electronic circuit.Avoid place the phone in dusty, dirty places, otherwise parts may be damaged.To avoid the phone in a lit cigarette, near open flame or any heat source.Do not open the device, non-professional approach will do damage to the phone.Do not throwit from height, knock or shake the phone, rough handling can damage internal circuit boards.Do not paint the phone, because the paint will block headphones, microphones or other removable parts, and lead it not work.Use clean, soft, dry cloth to clean the camera, light sensor lenses. Prohibit the use of harmful chemicals and cleaning agents, cleaning fluids to clean the phone If mobile phone, battery, charger, or mobile phone accessories are defective, send to the nearest qualified service center for inspection.I f nessary, Service Centre staff will assist you and will arrange for phone repairs. The status box will show this Wi-Fi icon , and the approximate signal strengthen (the number of lit bars).If touch the connected network will display the name of WiFi network, status, speed, signal, strength, security, information and IP address. If you want to delete the wireless settings, please touch not reserve as in the right picture. If you want to connect to this network, youshould re-enter these settings. NoticesUnless you choose not to reserve the network, otherwise, there is no need to re-enter the corresponding password when next time connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone neednt to perform additional steps to connect Wi-Fi networks. NoticesUnless you choose not to reserve the network with password, otherwise, there is no need to re-enter the corresponding password when next time connecting to the previously encrypted wireless network. Wi-Fi will search automatically, that is, phone neednt to perform additional steps to connect Wi-Fi network Manual de Usuario Contenido CONTENIDO ............................................................................................ 12 1.APARIENCIA Y OPERACIONES DEL TECLADO ......................................... 13 2.USANDO TARJETA DE MEMORIA Y DISCO USB ........................................ 13 3.WIFI ................................................................................................... 14 4.BLUETOOTH ......................................................................................... 16 5.MAIL ................................................................................................... 17 6.MARCANDO ......................................................................................... 19 7.MENAJES ............................................................................................ 22 8. CONTACTOS ........................................................................................ 24 9.INTERNET EXPLORER ........................................................................... 27 10.GRABADOR ........................................................................................ 28 11.RELOJ ................................................................................................ 29 12.CACULADORA .................................................................................... 29 13.CAMARA ............................................................................................ 30 14.IMAGENES.......................................................................................... 32 15.MUSICA ............................................................................................. 36 16.CALENDARIO ..................................................................................... 38 17.RADIO FM ....................................................................................... 38 18.CONFIGURACIONES ............................................................................ 39 19.CONSEJOS PARA EL USO DEL TELFONO .............................................. 42 12 1 . Apariencia y Operaciones de Teclado Manual de Usuario Keys home menu back power Arriba Abajo P-Sensor Funciones Pulse este botn para volver a home desde cualquier aplicacin o interfaz. Pulse para abrir la ventana de aplicaciones recientemente abierta. Pulse para iniciar el men, lo que le permite realizar acciones en la interfaz actual o el men de opciones ". Pulse para volver a la interfaz anterior, o para cerrar el cuadro de dilogo, men de opciones, el panel de notificacin o el teclado. Pulse para abrir el men del telfono, entonces usted puede optar por bloquear la pantalla, apagar el telfono o ponerlo en modo silencioso. Presione para aumentar el volumen Pulse para pasar a modo vibracin de modo silencioso Presione para disminuir el volumen. Cbralo, y luego la luz de fondo del telfono se apagar Cmara frontal Entrando en la interfaz de la cmara, cambiando a cmara frontal puede fotografa a s mismo. 2. Usando la Tarjeta de Memoria o el disco USB Si desea enviar msica, imgenes u otros archivos a la tarjeta de memoria del telfono de la computadora, usted debe configurar la tarjeta de memoria, disco usb primero. Fije la tarjeta de memoria como disco USB 1) Conecte el telfono al ordenador con el cable USB. El icono de notificacin aparecer en el cuadro de estado. 2) Utilizar la lnea de transmisin mvil USB para conectar al ordenador 3) En el panel de notificaciones aparece USB conectado, a continuacin, pulse "Abrir el dispositivo de almacenamiento USB"
2Despus de que la cmara se conect al PC, podr ver directamente las imgenes capturadas por la cmara en el PC 13 Manual de Usuario Nota: los diferentes Sistemas operativos del PC le indicarn como operar normalmente el disco USB. 1 WIN7 puede usar directamente 2 XP actualizacin de Windows Media Player a 11 3 Instale el driver wpdmtp.inf 4 Vista No confirmado Aviso: En la herramienta de asistente operacin de la PC como telfono mvil, debe estar abierta la depuracin USB. 3.WIFI Wi-Fi ofrece la medida de hasta 300 pies (100 m) Rango de acceso a la red inalmbrica. Si utiliza el telfono celular para conectar wifi, debe conectarse al punto de acceso inalmbrico o puntos calientes. Avisos: La disponibilidad y cobertura de seal Wi-Fi dependen del nmero, infraestructura y otros objetos que atraviesan la seal. Abra Wi-Fi y conectarse a la red inalmbrica 1) Presione home>men, luego toque configuracin>wifi e internet 2) Seleccione si-fi , para abrirlo. El telfono buscar automticamente las redes inalmbricas disponibles. 3) Toque Configuracin Wi-Fi. A continuacin, una lista de redes Wi-Fi se mostrar el nombre de la red encontrada y configuracin de seguridad. (red abierta o WEP, WPA/WPA2 con contrasea). Si habilita la notificacin en la configuracin de Wi-Fi, el cuadro de estado mostrar este icono (
)cuando abra red inalmbrica est disponible. 4) Toque una de las opciones Wi-Fi para conectarse a la red. Cuando usted elige una red abierta, el telfono se conectar automticamente a ella. Si selecciona WEP, WPA/WPA2 con contrasea, debe escribir la contrasea, luego toque para conectarlo. 14 Notacuando el telfono est conectado a la red inalmbrica, el cuadro de estado mostrar el icono de Wi-Fi Manual de Usuario
, y la intensidad de la seal aproximada (el nmero de barras iluminadas). Si toca la red conectada, se mostrar el nombre de la red Wi-Fi , estado, velocidad, seal, fuerza, seguridad, informacin y direccin IP. Si desea eliminar la configuracin inalmbrica, por favor tocar "no reserva", como en la imagen de la derecha. Si desea conectarse a esta red, se debe volver a introducir estos ajustes. Notas A menos que usted elige no reservar la red, de lo contrario, no hay necesidad de volver a introducir la contrasea correspondiente la prxima vez que desee conectar a la red inalmbrica cifrada previamente. Wi-Fi buscar automticamente, es decir, no es necesario realizar pasos adicionales en el telfono para conectar a las redes Wi-Fi. Conectar a otras redes Wi-Fi 1) En la interfaz de la conexin inalmbrica y red, toque Configuracin Wi-Fi. Las redes Wi-Fi encontradas se mostrarn en la lista de redes Wi-Fi. 2) Toque otras redes Wi-Fi, y luego se puede conectar a esta red. Aviso: adems, se puede navegar por Internet a travs de GPRS. Por defecto el GPRS se abre despus e iniciado en SIM1 se abre, los usuarios pueden seleccionar manualmente, la ubicacin especfica es "Configuracin> Conexiones inalmbricas y de Internet> Conexin de datos", toque "SIM1, SIM2, sin conexin de datos", cuando el punto se vuelve verde, ya est abierto. 15 4. Bluetooth Manual de usuario Encienda el Bluetooth o marque visibilidad para que el telfono pueda ser detectado. 1) Presione home>men, luego toque configuracin. 2) Toque conexiones inalmbricas e Internet, a continuacin, elija cuadro de Bluetooth para abrir la funcin Bluetooth. Despus de iniciado, el cuadro de estado mostrar este icono (
todos los dispositivos dentro de su alcance.
). Toque "Buscar dispositivos" para que empiece a buscar 3) Toque Ajustes de Bluetooth, todos los dispositivos encontrados se mostrarn en la lista bajo el icono.
(Marque la casilla "Visible" para ser detectado, los dems dispositivos Bluetooth podrn encontrar el telfono.) Importante: el tiempo de deteccin del telfono mximo es de 2 minutos. Vinculado y conectando un auricular Bluetooth 1) Presione home>men, luego toque configuracin. 2) Toque conexiones inalmbricas e internet>configuracin de Bluetooth, luego seleccione Bluetooth, y su telfono buscar los dispositivos Bluetooth dentro del rango, y le mostrar los dispositivos encontrados en la lista bajo el icono. Tips a. Si no encuentra el equipo en la lista, toque buscar dispositivos para volver a escanear. b. Asegrese de que los dispositivos buscados estn en modo deteccin. 3) Toque auricular en la lista de equipos para terminar la conexin. Notasgeneralmente los dispositivos Bluetooth requieren contrasea para vincularse, suelen utilizar 0000 como la contrasea predeterminada. 4) El estado de vinculacin y conexin se mostrar de acuerdo con el auricular en la lista de dispositivos Bluetooth. Cuando el auricular est conectado al telfono, el cuadro de estado mostrar este icono significa conectado. A continuacin, puede utilizar el auricular para realizar y recibir llamados. 16 Manual de usuario Notas:
Solo la vinculacin es necesaria entre dos dispositivos Bluetooth. Una vez conectado no es necesario identificarse e intercambiar informacin. Si ya conect un auricular y desea conectar un segundo, el primero ser desconectado. Si desea cambiar al primero, deber re-seleccionarlo manualmente en la lista de equipos Bluetooth. Significa que es un auricular Bluetooth Significa que el telfono est en modo de puede ser detectado Cortar la conexin con el Bluetooth 1) Presione home>men>configuracin>conexiones inalmbricas e internet>configuracin Bluetooth. 2) En la lista de equipos Bluetooth, toque o toque y mantenga el auricular manos libre conectado. 3) Presione y seleccione cancelar la vinculacin. Sensor de proximidad Bluetooth Despus de vincular los dos dispositivos, puede probar la si la seal es fuerte o dbil por el dispositivo sensor de proximidad Bluetooth 5.Mail 5.1 Gmail Crear una cuenta de correo electrnico Seleccione correo>configuracin. Puede activar o editar cuentas de correo electrnico existentes, as como crear una nueva cuenta de correo electrnico. a. Seleccione correo, aparece la interfaz de configuracin de cuenta Google. Luego toque prximo paso> crear cuenta>ingresar nombre, apellido y cuenta de e-mail. b. El servidor de Google determinar si el nombre se puede utilizar, de ser as, la interfaz nueva le pide introducir la contrasea, y luego juzga la seguridad de la contrasea ', los usuarios que no cumplan con los requisitos de seguridad debern volver a introducir la contrasea c. Si el registro a la nueva cuenta de Gmail es exitoso se enviar un mensaje de prueba automticamente. Configurar una cuenta de correo existente 17 Manual de usuario a. Abra Gmail saltee la pantalla de introduccin>la interfaz de carga aparece>seleccione configurar b. Ingrese nombre y contrasea e inicie sesin. Cuando informe conexin exitosa todas las cuentas de Google pueden ser sincronizadas. Creando y enviando e-mails Al crear mensajes, selecciona mail> creacin de mails. Introduzca la direccin (receptor), tema y contenido. Pulse MEN puede 'aadir', 'Aadir Cc / CCO', seleccione Enviar o descartar. Recibir e-mails Emite un tono para nuevos correos, en el cuadro de estado mostrar este botn volver a cargar y actualizar el nmero de correos no ledos de una manera apropiada. pulse Men> 'refrescar', para Borrar e-mails Cuando se carga una cuenta de correo, si desea eliminarla, es necesario restaurar a la configuracin de fbrica. Al cargar una segunda, puede pulsar el botn de men para eliminarla. Aviso: muchas de las funciones dependen de la cuenta de Gmail, por ejemplo: Mercado Electrnico, Google Talk, Sync contacto y calendario. 5.2 Email Configurar Email. c. Abra la conexin de red. d. En la interfaz de configuracin de cuenta, introduzca la direccin de correo electrnico y la contrasea correctas y haga clic en siguiente, el telfono mvil automticamente completar el envo y recepcin de la configuracin del servidor. e. Para la creacin de nombre de cuenta, ingrese el nombre de usuario y haga clic en siguiente. For account creation name, the editor of the law that email user name, and click next. Al completarse se sincronizar el buzn de correo. Crear y enviar Email Para crear mails, seleccione mails>crear mail. Ingrese la direccin (receptor), tema y contenido. Pulse MEN puede 'aadir', 'Aadir Cc / CCO', seleccione Enviar o descartar o guardarlo como borrador. Verificar los archivos de Email Haga clic en las opciones de carpeta, listar todas las opciones de carpeta 18 Manual de usuario 6.Marcando Cuando el icono del servidor de red aparece en la pantalla, se puede marcar o recibir llamados. La barra de seal en la esquina superior derecha indican la intensidad de la seal de la red (el mximo con 4 barras de seal). Comenzar a marcar Abra el menu principal de la aplicacin>marcar. Podr seleccionar SIM1 o SIM2 para marcar. 19 Manual de usuario Marcado En el teclado de marcacin, introduzca el nmero de telfono y, a continuacin, haga clic en la tecla de marcacin, despus de eso, usted debe elegir una tarjeta SIM o llamadas por Internet. Si es necesario llamar a la extensin, puede hacer clic en el "teclado" en la parte inferior de la pantalla para abrir la interfaz del men o pulse para seleccionar "retrasar 2 segundos", y luego introduzca el nmero de la extensin. Video llamadas: la llamada de video por lo general se refiere a la Internet e internet mvil basado en (3 G Internet). Esta funcin es soportada solo por 3 G. Introduzca el nmero, haga clic en vdeo llamadas, responder luego de que ambas cmaras estn disponibles. Registro de llamadas Cada nmero de telfono llamado y recibido en "SIM1, SIM2" se guardar en el registro de llamadas del telfono. En la parte superior izquierda de cada registro de llamadas mostrar "SIM1 o SIM2"
Todos los nmeros en el registro de llamadas se pueden marcar haciendo clic en el botn "marcado" en la parte derecha de la pantalla. Cuando aparezca la lista de nmeros, haga clic en l que desea para obtener los detalles, presione sostenidamente para marcar la opcin "SIM1 o SIM 2", por su parte, puede editar, eliminar, guardar el nmero o hacer otras operaciones. Recibiendo llamadas Cuando entra un llamando (arriba a la izquierda mostrar de qu tarjeta SIM procede) pulse "Responder" y deslice hacia la derecha hasta el botn del medio, entonces usted puede recibir el llamado. Sensor de Proximidad De acuerdo con la distancia entre el telfono y el cuerpo humano, que se ajustar automticamente la luz de fondo. Durante la llamada, al acercar el telfono al odo, la retroiluminacin se apaga de forma automtica, lo que podra ahorrar batera y evitar tocar accidentalmente. 20 Rechazar llamadas Manual de usuario a. Estando en modo espera, al entrar el llamado, presione rechazar y deslice el botn hacia la izquierda. De esa forma rechaza el llamado. b. Estando en uso, al entrar el llamado, presione el botn rechazar para rechazar el llamado. Notaesta funcin requiere que la tarjeta SIM abra la funcin de llamado en conferencia. Llamada de dos vas / mltiple (multiconferencia) 1) Ya existe la llamada en el telfono 2) Haga clic en "Agregar llamadas", marque otra llamada (o recibir otra llamada, por defecto el telfono abre en "llamada en espera" (Configuracin de marcado -las dems configuraciones de marcacin), despus de que ambos estn conectados, puede ver el estado de la llamada. 3seleccione combinar llamada podr combinar las dos llamadas en una va. 4despus de que se ha conectado la llamada mltiple, puede separar las llamadas o colgar una de ellas a travs de "la pequea flecha que indica conferencia telefnica. Grabacin de conversacin telefnica Durante la llamada, seleccione ms>comenzar a grabar, podr grabar el dilogo de la llamada. 1Configuracin> otras funciones de llamada en la configuracin de marcacin, por ejemplo: transferencia de llamadas, despus de finalizar todos los ajustes, puede transferir la llamada a un nmero determinado. 2En Ajustes> ajustes de Marcacin> Otros ajustes, abra "llamada en espera". Despus de activado, podr recibir una segunda llamada cuando ya existe uno, Las funciones de contestacin y rechazo son como el telfono normal. 21 Manual de usuario Configuracin de Llamadas Llamada de Voz 1Correo de Voz: Configurar el correo de voz. 2) Nmero de prefijo IP: Configuracin de nmeros de prefijo IP de las diferentes tarjetas SIM. 3Desvo de llamadas: Puede fijar el desvo de llamadas si la lnea est ocupada, o no puede recibir. 3) La restriccin de llamadas: Puede fijar, respectivamente, a las dos tarjetas SIM restricciones de llamadas 4) Ajustes adicionales: a. Mi nmero de telfono b. Llamada en espera Video Llamada 1Reemplazo de vdeo: establecer una imagen para que aparezca cuando la cmara no est en uso. 2) Display de video peer: establecer una imagen para que aparezca cuando el video peer no est disponible. 3Reemplazo de video de la otra parteestablecer una imagen para que aparezca cuando el video de la otra parte no est disponible. 4Habilitar cmara trasera: Disponible para cambiar cmaras. 5) Video de la otra parte de mayor tamaoEncienda para hacer el video de la otra parte ms grande que el video local. 6Regreso automtico: Regresa automticamente a la conexin de llamado de voz. 7Videollamada saliente: Mostrar vdeo local si realizar una videollamada. 8) Videollamada entrante: Mostrar vdeo local si aceptar una videollamada entrante. 9) Otras opciones: a. Desvo de llamadas b. Restriccin de llamadas c. Configuracin adicional Llamadas de Internet 1) Cuenta 2) Uso de llamadas de Internet Otros Ajustes 1 Nmeros de marcacin fija 2 Recordatorio de minuto: Encienda el recordatorio a los 50 s de cada minuto. 3 Respuesta rpida: Puede editar los mensajes de texto. 7. Mensajes Importanteel ttulo del mensaje de este telfono es el nmero de telfono (o nombre de contacto), ser similar para los dilogos, en lugar de la estructura de carpetas de costumbre. Mensajes con fondo azul son los que reciben, y son los mensajes que se envan con el fondo blanco. Envo de SMS a cierto nmero de telfono 1) Presione home>mensajetoque nuevo mensaje. 2) En la interfaz de editar:
a Pulse el recuadro de "receptor" para iniciar el mtodo de entrada, tambin puede pulsar "enter" para iniciar el mtodo de entrada, de esa manera se puede introducir caracteres. b Haga clic en el botn de "enviar desde SIM1 o SIM2" para iniciar el envo. Envo de MMS a cierto nmero de telfono El mensaje por defecto es SMS, puede pasar a MMS cuando se realicen las operaciones siguientes. Usted puede enviar MMS a travs de hacer clic en "enviar" despus de editar. 22 3) En la interfaz de edicinhaga Clic en el botn Men 4) Haga clic en "aadir", se puede pasar a los siguientes datos adjuntos, entonces se convertir en MMS Manual de usuario automticamente. Notas:
a, si usted quiere enviar MMS con muchas pginas, deber seleccionar "Aadir PPT" en la interfaz "aadir". b, usted puede aadir 10 imgenes, con la forma de GIF, JPEG. c Haga clic en "aadir temas", la caja de "tema" aparecer debajo de la caja de "receptor", por su parte, se pone automticamente en MMS. 23 Enviar mensajes a varios nmeros Introducir varios nmeros en el cuadro de entrada, cada nmero se divide por la coma en Ingls. Seleccione el receptor de los contactos o puede elegir el grupo de contacto en la libreta de direcciones Manual de usuario NotasPor ahora, este telfono puede enviar mensajes en masa a casi 20 nmeros, el nmero correcto depende de los caracteres, slo puede introducir 312 caracteres en el cuadro de "receptor". Cuando se enva o se enva un mensaje nuevo, aparecer un pequeo sobre de carta amarillo. El nmero 1 o 2 en el sobre se refiere a SIM1 o SIM2. Cuando no pueda enviar el mensaje, aparecer un tringulo rojo con el signo de exclamacin. Para editar informacin otras funciones de botn Men. 8. Contactos Abra el men de aplicaciones>contactos Por defecto muestra los contactos del telfono y de la tarjeta SIM por orden alfabtico. 24 Manual de usuario 2) Haga clic en el Icono Buscar, usted puede entrar en la interfaz de bsqueda de contactos. a. Para introducir los nmeros o las letras y la lista de nombres, que se muestra en los resultados de la bsqueda b. Si ninguno coincide con el contacto, la interfaz aparecer ningn contacto encontrado. 3Haga Clic en el Icono Agregar Contacto para crear nuevos contactos Seleccione guardar los contactos en el telfono o la tarjeta SIM, en la interfaz de edicin de contacto. Puede editar cabezal de contacto, nombre, nmero de telfono, grupo, guardar para y ms, y luego haga clic en
"Finalizar". 25 Manual de usuario 4En la interfaz de contactos, haga clic en el botn Men a. Menu >Borrar contactos Puede seleccionar el icono "todos" , haga clic en el botn de borrar, elimina todos los contactos del telfono celular y tarjetas SIM. Puede marcar uno o ms contactos, haga clic en borrar, eliminar los contactos seleccionados. b. Menu> Mostrar contacto Usted puede elegir todos los contactos, contactos de una tarjeta SIM, contactos del telfono c. Seleccione si desea mostrar o no los contactos del telfono y tambin de las tarjetas SIM o no mostrar ninguno. d. Menu >Importar/exportar Es posible copiar la informacin de los contactos tanto del telfono mvil como de cualquiera de las tarjetas SIM entre s. Primero elija la "fuente de la copia" y despus seleccione el siguiente paso, seleccionando copiar contactos de a, podr completar la copia de los contactos. e. Menu >Cuentas Cuenta y sincronizacin de ajuste de rutina Configuracin sncronos, pueden elegir los Datos de Fondo y la sincronizacin automtica. f. Menu >Compartir contactos visibles Todos los contactos se pueden importar en la tarjeta SD, o por medio de Bluetooth, correo electrnico, mensaje de texto o MMS Abrir la interfaz de la aplicacin> Contacto, cambie a grupo. 1Haga clic en el icono "Agregar grupo" para crear nuevo grupo. 2En la columna nombre de grupo ingrese "el nombre del grupo" , en la columna "escriba el nombre del contacto" ingrese el contacto, puede estar en la bsqueda de contactos. Por ltimo, haga clic en "Finalizar". 3) En un grupo, haga clic en el botn Men, Funciones de men 26 a. Men>Actualizar Puede modificar el nombre del grupo, suprimir o aadir grupos de contactos Manual de usuario b. Men >Borrar Es posible eliminar el grupo, y no eliminar el contacto en s. c. Men >Enviar mensajes a un grupo. Aadir el nombre del grupo en el destinatario. d. Men >Enviar Email a un grupo Agregar el nombre del grupo en el destinatario del e-mail. 9. Internet Explorer Internet explorer 1) En la interfaz de Internet Explorer, toque el campo de direccin e introduzca la URL. 2) Use el teclado para introducir el URL. Los sitios web apropiados van a aparecer en la pantalla. Puede tocar directamente para ir a la pgina o seguir entrando URL. Pgina de inicio Seleccione "pgina de inicio", se podra fijar la pgina de inicio. Si no se establece utilizar los sitios predeterminados del proveedor. Funciones del men 1) Men>Hacia Atrs Despus de navegar a travs de mltiples pginas, regresar a la pgina anterior la pgina actual. 2) Menu>Hacia Adelante Despus de navegar a travs de varias pginas, se trasladar a una pgina web despus de la pgina actual. 3) Menu>Ventanas Puede ver todas las ventanas abiertas actuales. 4) Menu>Favoritos 27 a. Haga clic en "Favoritos" para que la URL actual como favorito guardado. b. Haga clic en el marcador en la lista de favoritos, se abrir la URL. Manual de usuario 5) Menu>Mas Informacin de la pgina, la pantalla direccin de la pgina y otros datos de la navegacin actual. a. Aadir marcadores, guardar la direccin URL actual como favorito. b. Buscar en la pgina, busca lo que necesita en la pgina actual. c. Seleccione el texto, en el texto, haga clic y arrastre para seleccionar un fragmento de texto. d. e. Compartir la pgina, seleccione el Bluetooth o SMS para compartir la pgina actual. f. Descargas, mostrar todo el contenido descargado. g. Historia, Mostrar el historial de navegacin, y ver las pginas ms visitadas de la informacin. h. Configuracin contenidos, una variedad de configuraciones del explorador. 10. Grabador La grabadora puede grabar voz y enviarla rpidamente a travs de Bluetooth o MMS, as como definirla como tono de llamada. NotaLa grabadora slo puede guardar los archivos de audio como AMR. 1) Haga clic en la aplicacin de grabacin. 2) Mantenga el micrfono del telfono cerca de la fuente de voz. 3) Haga clic en la grabadora para grabar las voces, y haga clic para detener o para ir a la Lista grabaciones. Todas las grabaciones son guardadas en mi carpeta de grabacin en el programa de msica por defecto. 28 11.Reloj Manual de usuario 1) Abra el men de la aplicacin, haga clic en 2) Haga Clic en la pantalla sobre el icono, mostrar la hora en fondo negro con nmeros blancos grandes. 3) Haga clic en el botn de alarma para entrar en la interfaz de ajuste de alarma del reloj. Alarma Despus de fijada la alarma, al llegar la hora el telfono avisar por timbre o vibracin. Pulse Men para agregar alarma, tambin se puede aadir que desde la interfaz de adicin. Usted puede configurar la alarma de acuerdo a sus necesidades. En la interfaz de la alarma mostrar tres alarmas cerradas (dos relojes de alarma es de lunes a viernes 8:30,9:00). Editar Puede editar la alarma actual, puede editar la hora, tonos de timbre, vibracin, forma de repeticin y pestaas. 12.Caculadora Calculadora Con esta funcin puede convertir su telfono en una calculadora, puede hacer algunos clculos sencillos. Toque las teclas numricas para que aparezcan en el cuadro en blanco. En la interfaz de la calculadora, presione el botn MENU o presione la pantalla hacia la izquierda, luego aparece el panel principal. 29 Manual de usuario 13.Cmara 13.1 Cmara Preparacin previa Instale una tarjeta de memoria antes de utilizar la cmara o cmara de vdeo. Todas sus fotos o videos tomados con el telfono se guardan en la tarjeta de memoria. Abrir la cmera Pulse Inicio, toque Men, seleccione Cmara. Tome fotos 1Apunte su objeto con la pantalla. 2Toque el botn "disparador" en la pantalla. 3Despus de tomar fotos se guardarn en la carpeta Galera de la cmara con el nombre de la fecha en que fueron tomadas. 4Puede ver las fotos pulsando el botn cuadro de vista previa. 5Configuracin de la cmara Puede pulsar el botn de "Men de configuracin" en la interfaz de la cmara para hacer los ajustes En el modo de visor de la cmara, pulse Men, puede cambiar a la galera de vdeos o fotos. En la parte superior derecha de modo de visor de la cmara, mostrar la vista previa de la imagen anterior. Toque el cuadro de vista previa, para la visualizacin de la foto en pantalla completa, puede ampliarlo para ver los 30 Manual de usuario detalles. Ajustes compartidos de Cmara y Videocmara 1Modo FlashAutoOnoff. 2Balance de blancos: Auto, Incandescente, Luz del da, Fluorescente, Nublado, Crepsculo, sombra, fluorescente clido. 3Efecto de color: Ninguno, Mono, Sepia, Negativo, Agua, Pizarrn negro, Pizarra blanca. 4Modo de escena, Auto, Noche, Puesta de sol, Fiesta, Retrato, Paisaje, Retrato nocturno, teatro, Playa, Nieve, Foto fija, Fuegos artificiales, Deporte, luz de las velas. 5otros ajustes: ubicacin, exposicin, Caractersticas de la imagen, anti-parpadeo Configuracin de la Cmara 1) Modo de captura: normal, HDR, Rosto, Panorama 2) Disparador automtico: Apagado, 2 segundos, 10 segundos 3) Toma continua: 40 tiros, 90 tiros 4) Tamao de imagen: QVGA, VGA, 1M pxel, 1.3M pxeles, 2M pxeles, 3M pxeles, 5M pxeles 13.2 Video camera Preparacin previa Instale una tarjeta de memoria antes de utilizar la cmara o cmara de vdeo. Todas sus fotos o videos tomados con el telfono se guardan en la tarjeta de memoria. Tamar video 31 Manual de usuario 1Apunte su objeto con la pantalla. 2Toque el botn disparador" en la pantalla. 3 Despus de tomar los videos se guardarn en la carpeta Galera de la cmara con el nombre de la fecha en que fueron tomados. 4Puede ver los videos pulsando el botn cuadro de vista previa. 5) Configuracin de Video cmara Puede pulsar el botn de "Men de configuracin" en la interfaz de la cmara para hacer los ajustes. En el modo de visor de la cmara, pulse Men, puede cambiar a la galera de vdeos o fotos. En la parte superior derecha de modo de visor de la cmara, mostrar la vista previa del vdeo anterior. Toque el cuadro de vista previa, el vdeo se mostrar en pantalla completa y se puede tocar el botn de reproduccin para poder verlo. Ajustes compartidos de Cmara y Videocmara 1) Mood de flash: Auto, On, off. 2) Balance de blancos: Auto, Incandescente, Luz del da, Fluorescente, Nublado, Crepsculo, Sombra, clido fluorescente. 3) Efecto de color: Ninguno, Mono, Sepia, Negativo, Agua, Pizarrn negro, Pizarra blanca. 4) Modo de Escena, Auto, Noche, Puesta de sol, Fiesta, Retrato, Paisaje, Retrato nocturno, teatro, Playa, Nieve, Foto fija, Fuegos artificiales, Deporte, luz de las velas. Configuration de Videos 1) Microphone: off, on 2) Modo de audio: reunin, normal, 3) intervalo de tiempo transcurrido: off, 1 s, 1,5 s, 2 s, 2,5 s, 3s, 5s, 10s 4) Calidad de video: baja, media, alta, fina 14. Imgenes Abrir imagenes 32 Pulse Inicio, toque etiqueta de aplicaciones, y luego toque galera de fotos. En la interfaz de la cmara, pulse men para abrirlo y, a continuacin, toque para operar. Manual de usuario Incluye las imgenes tomadas por la cmara Videos de la galera 1 Interfaz de archivos Imgenes Bluetooth transmitidas por a. En la interfaz de la biblioteca, se presentan las diapositivas con en el botn de reproduccin, haga clic para reproducir las diapositivas de todos los archivos de imagen. b. Haga clic en las imgenes, ingrese en la foto para ver la interfaz. c. Seleccione los archivos de imagen presionando sostenidamente, operacin correspondiente emerger. Uso de imgenes Despus de tomar fotografas, puede verlas y compartirlos con tus amigos. a. Utilizar el correo electrnico para enviar las imgenes: seleccione Gmail o correo electrnico, las imgenes se agregan automticamente a una direccin de correo electrnico. Escriba los datos y haga clic en enviar. 33 Manual de usuario b. Utilice Mensajes para enviar fotos: Seleccionar la informacin, las imgenes se agregarn a MMS. Escriba los datos y haga clic en enviar. C. Use Bluetooth: seleccione el equipo ya vinculado por bluetooth, enve una imagen. 4Verificar fotos En la interfaz de foto, puede ver las fotos hacia adelante o hacia atrs y editarlas. a. Editar la luz: luz de relleno, Reflejo, Sombras, Auto-Fix. b. Editar efectos de imagen: Proceso cruzado, Posterizar, Lomo, documental, etc. c. Efectos de color: Calidez, saturacin, Blanco y Negro, Sepia, Negativo, Tinte, Doble tono, Garabato. d. Recortar: Enderezar, Ojos Rojos, Girar, Dar la Vuelta, Enfocar. 34 Manual de usuario 6Recortar fotos:
a. Si desea ajustar el tamao del clip, por favor, pulse el borde de la herramienta de corte. Arrastre con sus dedos para ajustar al tamao deseado. b. Si desea mover el rea cortada, por favor mantenga el rea cortada y arrastre los dedos para la posicin deseada. Ver imgenes 1) En la ventanilla de imagen, toque lbum de fotos para ver las imgenes. 2) Toque la miniatura para ver las imgenes a pantalla completa. Usted puede optar por mostrar las miniaturas pequeas o grandes. Mantenga pulsada la pantalla hacia la izquierda para ver la foto siguiente o hacia la derecha para ver la anterior. En el lbum de fotos o lista, pulse y mantenga pulsada la imagen hacia la izquierda para ver la foto siguiente o hacia la derecha para ver la anterior. 35 Manual de usuario 15. Msica El telfono puede reproducir archivos de audio digital en la tarjeta de memoria. Los siguientes formatos estn disponibles: AMR, M4A, MIDI, MP3, WAV, OGG. Abrir Msica Presione INICIO, pulse la etiqueta de las aplicaciones, toque msica. A continuacin, aparece la interfaz de Videos Musicales. Music Media Los archivos de msica se clasifican de acuerdo a las siguientes cuatro categoras: artistas, lbumes, canciones y listas de reproduccin. Toque una de estas categoras, para ver la lista que contiene. Contine con la operacin, hasta que aparezca la msica deseada. Por ejemplo, si elige Artistas una lista de artistas ordenados por los alfabticamente aparecer. Escoja cualquiera de la lista abierta, entonces aparecern todos los discos y canciones. Seleccione un lbum y, a continuacin se reproducen las canciones. 36 Manual de usuario Toque cualquier categora, luego abra los archivos de msica deseados Men de control Aparece al reproducir msica, toque para entrar en la interfaz. Consejos: Puede reproducir todas las canciones en la interfaz de medios de la msica, de forma aleatoria. Pulse Men, y luego toque Modo aleatorio. A continuacin, comenzar a reproducirse la primera cancin seleccionada al azar. Para cerrar el Modo aleatorio, presione Men, despus toque para apagar el Modo aleatorio. las Toque para volver a canciones anteriores. Barra de progreso 37 Toque para ver la lista de reproduccin Indica si encendida o no la mezcla est Toque para cambiar el modo de reproduccin Toque rpidamente para cambiar las canciones o para la siguiente cancin Duracin total del repertorio Toque para detener reproduccin la 16. Calendario Manual de usuario Ingrese a la aplicacin calendario Cargue cuentas Google, entre en la aplicacin, en la interfaz del mes o de la semana usar gris para resaltar el da. Por defecto mostrar la fecha en el mes actual. En la interfaz, presione men, aparecern 4 modos de visualizacin 1) La interfaz de horario muestra un horario determinado (haga clic en el momento inicial y haga clic en la hora de 2) La Interfaz da muestra la programacin de un da (ltima fecha), deslice a la pgina siguiente para el da deseado. 3) La Interfaz de semana muestra la programacin de una semana (ltima fecha), deslice a la pgina siguiente para la 4) La interfaz hoy muestra la programacin de un da, en la interfaz del mes o de la semana usa gris para resaltar el da. 5) La interface mes muestra la programacin del mes (ltimo dato hecho clic) deslice a la pgina siguiente para el mes finalizacin) semana deseada. deseado. Nuevas actividades 1) Pulse men, ms <toque nuevas actividades. 2) Introduzca el nombre de la actividad en el cuadro de las actividades. Avisos: Por ejemplo ocasiones especiales como cumpleaos o un da de eventos, establezca la opcin de da completo en S. Si la actividad se encuentra en un perodo de tiempo determinado, seleccione la hora de inicio y hora de finalizacin. 3) Introduzca la ubicacin del evento, descripcin, huspedes, repeticin, tiempo de aviso. 4) Haga clic en Finalizar para volver al calendario. 17. Radio FM Radio FM A travs de este programa, usted puede escuchar la radio FM en el dispositivo, la radio FM utiliza los auriculares con cable como antena para recibir seales, antes de abrir este programa, usted puede instalar los equipos-auriculares originales, al escuchar, se puede cambiar de forma manual para altavoces o el modo de auriculares con cable. 38 Abrir radio FM o Manual de usuario Toque este icono para abrir la aplicacin de radio FM. 1) Haga clic en "bsqueda", inicia la bsqueda automtica de canales de FM, y se listan todos los canales en la interfaz de lista. 2) Haga clic en "Grabacin de FM", se puede grabar la radio que est emitiendo. La grabacin ser guardada en un nombre de archivo por defecto 3) Haga clic en "Salir" para cerrar la radio FM, no se puede escuchar en el fondo. 4) Se debe insertar los auriculares de cable como antena, pero haga clic en el botn de la bocina, puede poner la radio FM en altavoz. 5) Haga clic en icono de estrella sobre la frecuencia, se aadir el canal a la lista de canales. Bsqueda de canales hacia adelante Bsqueda hacia adelante Salir de FM Lista de Canales en clic la Haga estrella. El canal actual es agregado a la lista de canales Ajuste de frecuencia hacia atrs Bsqueda hacia atrs Escuche la radio FM de fondo Haga clic para volver al teclado, el programa de radio se traslad a un segundo plano, en este momento todava se puede seguir escuchando la radio, y tambin se puede llevar a cabo cualquier otro programa. 18.Configuraciones Su proveedor de servicios puede definir algunas configuraciones del dispositivo, por lo que puede no ser capaz de cambiar esta configuracin. Manejo de SIM 39 1) Pulse para seleccionar o deshabilitar la tarjeta SIM, la tarjeta es de color gris cuando est desactivado, el modo Manual de usuario 2) Una vez definida la tarjeta SIM por defecto, usted puede elegir llamada de voz, llamadas de video, mensajera, avin aparece en la barra de estado. conexin de datos. Conexin inalmbrica e Internet 1) Modo avin: toque para abrir o cerrar. 2) Wi-Fi y configuracin Wi-Fi : Toque Wi-Fi las redes disponibles de forma automtica, las redes sin contrasea pueden ser utilizadas directamente, otras necesitan que introduzca la contrasea primero. Aviso: Al abrir el modo avin el Wi-Fi se cerrar automticamente, al cerrar el modo avin y abrir la conexin Wi-Fi, se puede utilizar normalmente. para abrir
. Abra Wi-Fi, puede buscar Bluetooth Toque el icono Bluetooth para abrir, automticamente buscar los dispositivos conectados a bluetooth cerca del equipo. 1. El uso de datos: al crear un lmite de trfico de datos mviles, el flujo ms que el lmite provocar que el servicio de Uso de Datos datos mviles se cierre. 2. Mas Conexiones inalmbricas & redes a. Modo avin b. VPN c. Anclaje a red y zona Wi-Fi d. Redes mviles e. Modo de transferencia GPRS Perfiles de audio Esta opcin permite la configuracin de los tonos del telfono para la recepcin de llamadas o la notificacin. Incluye:
Vibracin, volumen, tonos de llamada, tono de notificacin, tonos y retroalimentacin (tono de operacin de los botones, sonido de seleccin, tono de bloqueo de pantalla, tctil). Para adaptarse a todos los ambientes. 1) Seleccione "Estandar / Mudo / Conferencia / Aire Libre, toque el punto de la derecha, cuando se pone verde, se 2) Volumen: Incluye el volumen del timbre y la configuracin del reloj de alarma, que se puede deslizar manualmente abre. para seleccionar. Displays a. Brillo: Ajusta el brillo b. Pantalla giratoria automtica: Gire el telfono para cambiar de direccin c. Animacin: Elija mostrar animaciones d. Tiempo de espera de la pantalla: Ajuste el tiempo para bloquear automticamente la pantalla Almacenaje a. Puede ver la tarjeta SD y el uso de la memoria del telfono celular. b. Puede desmontar la tarjeta SD o Borrar la tarjeta SD. c. Puede elegir la memoria predeterminada. Batera Tiempo de arranque, y uso de cada modulo, para el uso de la energa en general. Aplicaciones 1) Orgenes desconocidos: Permitir la instalacin de aplicaciones que no son electrnicos del mercado 2) Administrar aplicaciones: Administrar y eliminar las aplicaciones instaladas. 3) Servicios en ejecucin: Toque cualquiera de los servicios enumerados para hacerlos desaparecen de la lista "Servicios en 40 Manual de usuario ejecucin". 4) Uso de almacenamiento: se puede ver el programa de descarga, todo en una tarjeta SD o verificar el espacio de memoria que ocupan. 5) Uso de la batera: se puede ver la situacin de la batera, utilizar celular en Standyby, telfono inactivo, la pantalla y el navegador. 6) Desarrollo: a. Depuracin USB: USB de depuracin slo se aplica en el proceso de desarrollo. Esta funcin permite copiar datos en el ordenador y los dispositivos mviles. Acceso a ubicacin 1) El uso inalmbrico: Use la conexin inalmbrica para encontrar lugares en la aplicacin (Google maps). Pulse para abrir o cerrar 2) Cuando se utiliza el posicionamiento por satlite GPS, ajuste de precisin a nivel de la calle (cancelarlo para ahorrar batera). Pulse para abrir o cerrar 3) Asistencia EPO GPS, use los datos de asistencia el GPS (EPO) para acelerar el posicionamiento GPS 4) A-GPS: Usar datos auxiliares puede acelerar el proceso de posicionamiento GPS. Al abrirlo le recordar "que producen los flujos de GPRS al utilizar A-GPS."
Seguridad 1) Establecer bloqueos de pantalla: Utilice imgenes, PIN o contrasea para bloquear la pantalla. a. Toque "imgenes", la primera vez habr unas sencilla instrucciones de desbloqueo y ejemplos, haga clic en "siguiente paso" para continuar con el paso de " imagen de desbloqueo". b. Toque PIN: Introduzca el nmero PIN para desbloquear la pantalla. c. Contrasea: Toque establecer contrasea para desbloquear la pantalla. d. Toque "no" para detener esta aplicacin. 2) Configurar el bloqueo de la tarjeta SIM: Ingrese (4-8 nmeros) PIN para activar el bloqueo de SIM. El PIN (Nmero de Identificacin Personal) de la Tarjeta SIM es para prevenir el uso no autorizado del cdigo de tarjeta SIM. El PIN es suministrado con el SIM. El proveedor de servicios proporciona el valor inicial. Para cambiar un cdigo PIN bloqueado, es necesario abrir el "Bloqueo SIM", luego ir a la pantalla Cambiar contrasea, el telfono le pedir automticamente que introduzca el cdigo PIN antiguo y le pedir que introduzca un cdigo PIN nuevo dos veces, finalmente, el telfono le indicar que el cambio el cdigo es exitoso. Si ingresa el PIN con error por tres veces, los cdigos PIN de la tarjeta SIM se bloquear de forma automtica, el cdigo PUK se suministrar normalmente con la tarjeta SIM. Si no, hay que ir al proveedor de servicios para solicitarlos. Si introduce 10 veces mal el cdigo PUK, la tarjeta SIM quedar bloqueada de forma permanente. 3) Contrasea visible: Contrasea visible al entrar. 4) Seleccione Administracin del dispositivo: Agregar o eliminar administrador de dispositivos. 5) Utilizar las credenciales de seguridad: Permitir credenciales de seguridad visita aplicacin u otras credenciales. 6) Instalar desde la tarjeta SD: Instale el certificado de cifrado de la tarjeta SD. 7) establecer una contrasea: Establecer o cambiar Certificado de la contrasea guardada. 8) Borrar Almacenamiento: borrar todo el contenido del almacn de certificados y restablecer sus contraseas. 9) Right after the mobile is power on, it will automatically search the network, if authorized network is founded, the network name and signal strength will be displayed, or you can only use some emergency call 112/911 or other non communication function Lenguajes y teclado 1) Seleccin de Idioma: Incluir todos los idiomas en el telfono. 2) Diccionario personalizado: Agregar palabras al diccionario personalizado o eliminar. 3) Configuracin del teclado: Vibrar al pulsar los botones, reproducir sonido al pulsar los botones, primera letra en mayscula de forma automtica, entrada de voz (por el micrfono en el teclado), ingresando palabras (el discurso puede ser alterado al deslizar el dedo sobre tecla de espacio), mostrando consejos (activar funcin predictiva al ingresar palabras), Auto-Texto (Automticamente ingresara ciertas palabras cuando pulse la tecla espacio o teclas especificas). 4) Mtodo de entrada: puede seleccionar el teclado Android o mtodo de entrada pinyin google. Copia de seguridad y restaurar 2) Copia de seguridad de los datos de aplicaciones, contrasea WLAN, y otras configuraciones en el servidor de Google. 41 3) Restablecer los ajustes de fbrica y borrar todos los datos almacenados en el telfono Manual de usuario Agregar cuenta a Corporativa b Email c Google Fecha y Hora 1) Automatizacin: fecha de Uso y hora proporcionada por la red. 2) Ajuste de la fecha: Pulse "+" y "-" para ajustar la fecha. 3) Seleccin de zona horaria: Seleccione la zona horaria de acuerdo a donde se encuentre. 4) Ajuste de la hora: Pulse "+" y "-" para ajustar la hora. 5) Utilizar 24 horas: Formato de hora ON / OFF 6) Seleccione Formato de fecha: Hay 3 tipos de formatos que puede elegir: Mes-Da-Ao, da-mes-ao y el ao-mes-da, entre los cuales Ao-Mes-Da es el ajuste predeterminado. Programacin de encendido/apagado Puede configurar el tiempo de arranque o apagado tocando el icono. Tambin puede optar por repetirlo o repetir un cierto da durante la semana. Accesibilidad 1) Textos grandes 2) El botn de encendido finalize la llamada: con el botn de encendido puede finalizar la llamada sin cerrar la pantalla. 3) Pantalla con auto-giro 4) Contraseas habladas 5) Retraso en el tiempo de mantener pulsado 6) 7) Quick boot, inicio rpido Instalar web scripts Opciones para Desarrolladores a. Depuracin de USB: depuracin de USB slo para el desarrollo y el disco USB. b. Permanecer activo: Pantalla nunca va a dormir mientras se est cargando. c. Permitir ubicaciones falsas d. Contrasea de seguridad de escritorio e. Modo estricto activado f. Ubicacin del puntero g. Mostrar detalles h. Mostrar actualizaciones de pantalla i. Mostrar uso del CPU j. Force GPU rendering k. Escala de animacin:
l. Escala animacin Transicin m. No mantener las actividades n. Lmite proceso de background o. Mostrar todos los APRs
* Acerca del telfono Puede consultar sobre la informacin en la barra de estado y la energa restante. 19. Avisos para el uso del telfono Su telfono es un producto de diseo y fabricacin excelentes, y debe tratarse con cuidado. Las siguientes sugerencias pueden ayudarle a cumplir con los trminos de los kits de reparacin, para extender la vida de la telefona mvil. 1) Coloque el telfono mvil y sus partes y componentes fuera del alcance de los nios. 2) Mantenga el telfono seco , la lluvia , la humedad y los lquidos contienen minerales que corroen los circuitos electrnicos. 42 Manual de usuario 3) No toque el telfono con las manos mojadas durante la carga , se puede provocar una descarga elctrica o daar el telfono . 4) Evite colocar el dispositivo en entornos de alta temperatura. Las temperaturas acortan la duracin de los dispositivos electrnicos, daar las bateras y deformar o derretir algunos plsticos. 5) Evite colocar el dispositivo en el entorno de muy baja temperatura. Cuando la temperatura sube , el telfono va a producir vapor de agua que pueden daar el circuito electrnico . 6) Evite colocar el telfono en lugares sucios o polvorientos , de lo contrario se pueden daar las piezas . 7) Evite colocar el telfono cerca de un cigarrillo encendido , cerca de una llama o cualquier fuente de calor. 8) No abra el dispositivo , el enfoque no profesional har dao al telfono. 9) No lo tire desde la altura , golpee ni sacuda el telfono , la manipulacin brusca puede daar los circuitos electrnicos. 10) No pinte el telfono , ya que la pintura bloquear auriculares , micrfonos y otras partes removibles , y llevar a que no funcione. 11) Utilice un pao suave, limpio y seco para limpiar la cmara, el sensor de luz. Est prohibido el uso de productos qumicos nocivos y productos de limpieza , lquidos de limpieza para limpiar el telfono 12) Si el telfono mvil, batera , cargador o accesorios de telefona mvil son defectuosos , enve al centro de servicio autorizado ms cercano para su inspeccin. 13) De ser necesario , personal del Servicio de Centro le ayudar y har los arreglos necesarios para las reparacin del telfono. 43
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2017-05-15 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Original Equipment |
2 | 2412 ~ 2462 | DTS - Digital Transmission System | ||
3 | 826.4 ~ 846.6 | PCE - PCS Licensed Transmitter held to ear | ||
4 | JBP - Part 15 Class B Computing Device Peripheral |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2017-05-15
|
||||
1 2 3 4 | Applicant's complete, legal business name |
Collage Investments LLC.
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0021633474
|
||||
1 2 3 4 | Physical Address |
6030 NW 99 Ave #414
|
||||
1 2 3 4 |
Doral, Florida 33178
|
|||||
1 2 3 4 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
r******@element.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
1 2 3 4 |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
1 2 3 4 |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
GAO
|
||||
1 2 3 4 | Equipment Product Code |
STAR4
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
D****** E****** G****
|
||||
1 2 3 4 | Title |
Manager
|
||||
1 2 3 4 | Telephone Number |
78697********
|
||||
1 2 3 4 | Fax Number |
78697********
|
||||
1 2 3 4 |
c******@gmail.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | PCE - PCS Licensed Transmitter held to ear | |||||
1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | MOBILE PHONE | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Original Equipment | ||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.52W/kg, 0.85W/kg, 0.87W/kg and 1.06W/kg respectively. | ||||
1 2 3 4 | RF output power is conducted The antenna(s) used for this device must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures; End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.52W/kg, 0.85W/kg, 0.87W/kg and 1.06W/kg respectively. | |||||
1 2 3 4 | Output power listed is ERP for FCC Rule Part 22H and output power listed is EIRP for FCC Rule Part 24E. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filling. Body-worn operations are restricted to the specific belt-clips/holsters/accessories tested for this filling, and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5cm separation between device and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF Exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission use conditions is 0.52W/kg, 0.85W/kg, 0.87W/kg and 1.06W/kg respectively. This device also contains functions that are not operational in U.S. Territories. This filling is only applicable for US Operations. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Waltek Services(Shenzhen) Co., Ltd.
|
||||
1 2 3 4 | Name |
p****** z****
|
||||
1 2 3 4 | Telephone Number |
86755********
|
||||
1 2 3 4 | Fax Number |
86755********
|
||||
1 2 3 4 |
p******@waltek.com.cn
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0088000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0089000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 22H | 824.2 | 848.8 | 1.1169 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
3 | 2 | 22H | 824.2 | 848.8 | 1.1641 | 2.5 ppm | 247KGXW | ||||||||||||||||||||||||||||||||||
3 | 3 | 22H | 824.2 | 848.8 | 0.3221 | 2.5 ppm | 255KG7W | ||||||||||||||||||||||||||||||||||
3 | 4 | 22H | 826.4 | 846.6 | 0.0547 | 2.5 ppm | 4M22F9W | ||||||||||||||||||||||||||||||||||
3 | 5 | 22H | 826.4 | 846.6 | 0.0573 | 2.5 ppm | 4M21F9W | ||||||||||||||||||||||||||||||||||
3 | 6 | 22H | 826.4 | 846.6 | 0.0533 | 2.5 ppm | 4M23F9W | ||||||||||||||||||||||||||||||||||
3 | 7 | 24E | 1850.2 | 1909.8 | 0.9311 | 2.5 ppm | 245KGXW | ||||||||||||||||||||||||||||||||||
3 | 8 | 24E | 1850.2 | 1909.8 | 0.8831 | 2.5 ppm | 242KGXW | ||||||||||||||||||||||||||||||||||
3 | 9 | 24E | 1850.2 | 1909.8 | 0.3945 | 2.5 ppm | 248KG7W | ||||||||||||||||||||||||||||||||||
3 | 1 | 24E | 1852.4 | 1907.6 | 0.1413 | 2.5 ppm | 4M24F9W | ||||||||||||||||||||||||||||||||||
3 | 11 | 24E | 1852.4 | 1907.6 | 0.1622 | 2.5 ppm | 4M22F9W | ||||||||||||||||||||||||||||||||||
3 | 12 | 24E | 1852.4 | 1907.6 | 0.1469 | 2.5 ppm | 4M22F9W | ||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15B | CC |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC