FCC ID: GAO-SM6221 Smartphone

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and

FCC Statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

·

·

receiver.

·

different from that to which the receiver is connected.

·

technician for help.

Caution: Any changes or modifications to this device not

explicitly approved by manufacturer could void your authority

to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

RF Exposure Information

The device has been evaluated to meet general RF exposure

requirement. The device can be used in portable exposure

condition without restriction.

Connect the equipment into an outlet on a circuit

Consult the dealer or an experienced radio/TV

-22-

Specific Absorption Rate (SAR) information:

This Smartphone meets the government's requirements for

exposure to radio waves. The guidelines are based on

standards that were developed by independent scientific

organizations through periodic and thorough evaluation of

scientific studies. The standards include a substantial safety

margin designed to assure the safety of all persons regardless

of age or health. FCC RF Exposure Information and

Statement the SAR limit of USA (FCC) is 1.6 W/kg

averaged over one gram of tissue. Device types: Smartphone

has also been tested against this SAR limit. This device was

tested for typical body-worn operations with the back of the

phone kept 10mm from the body. To maintain compliance

with FCC RF exposure requirements, use accessories that

maintain an 10mm separation distance between the user's

body and the back of the phone. The use of belt clips,

holsters and similar accessories should not contain metallic

components in its assembly. The use of accessories that do

not satisfy these requirements may not comply with FCC RF

exposure requirements, and should be avoided.

-23-

Shenzhen LCS Compliance Testing Laboratory Ltd. FCC ID: GAO-SM6221 LABEL AND LOCATION Smartphone Model No.: Smooth 6.26 Lite FCC ID: GAO-SM6221 Caution:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Size: L 4.0cm*W2.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

Collage Investments, LLC. Agent Authorization Company: Collage Investments, LLC. Address: 6030 NW 99 Ave #414 Doral Florida 33178 United States Product Name: Smartphone Trade Mark: S Smooth Model Number(s): Smooth 6.26 Lite FCC ID: GAO-SM6221 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Daniel Esteban Gonzalez Title:

Manager Company: Collage Investments, LLC. Date: 2021-08-09

Collage Investments, LLC.

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046

USA

Date: 2021-08-09

Subject; Request for Confidentiality

FCC ID: GAO-SM6221

To Whom It May Concern,

Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we

are requesting the Commission to withhold the following attachment(s) as confidential

documents from public disclosure indefinitely.

These documents contain detailed system and equipment descriptions and are considered as

proprietary information in operation of the equipment. The public disclosure of these documents

might be harmful to our company and would give competitors an unfair advantage in the market.

Schematic Diagram

Block Diagram

Parts List

Operational Description

Tune-up Procedure

External Photos

Test Setup Photos

Internal Photos

User Manual

In additional to above mentioned documents, in order to comply with the marketing regulations

in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that

business sensitive information remains confidential until the actual marketing of newly

authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR

For 45 days, pursuant to Public Notice DA 04-1705.

For 180 days pursuant to KDB 726920 D01.

It is our understanding that all measurement test reports, FCC ID label format and

correspondence during the certification review process cannot be granted as confidential

documents and this information will be available for public review once the grant of equipment

authorization is issued.

Sincerely,

Signature:

Name: Daniel Esteban Gonzalez

Title: Manager

Collage Investments, LLC.

WIFI Channel 12 and 13 Declaration Letter

We declare the equipment identified below with regards to Channel 12 and 13 capabilities for

FCC ID: GAO-SM6221

Declaration

Product hardware does not have the capability to operate on Channel 12 and

13.

Product hardware has the capability to operate on Channel 12 and 13.

However, these two channels will be disabled via software and will not be

accessible to user.

Product hardware has the capability to operate on Channel 12 and 13.

However, all the operated channels can’t be changed in the RF parameter via

software. All channels have complied with all of the requirements sets out in

FCC Part 15.247.

Product hardware has the capability to operate on WiFi Channel 12 and 13,

and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the

U.S. requirements.

2.) This device will also use supplemental information such as geo-

location data to determine that it is operating outside the U.S., if

necessary, to change its power. Such supplemental data will be

derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device

Mobile Country Code (MCC),8 or MCC with a Mobile Network code

(MNC), received from a CMRS9 carrier and received directly by a receiver

on the device

Country information derived from multiple adjacent access points (for

example using IEEE Std 802.11d provisions) may be permitted on case-by-

case basis

Other suitable geo-location data based on IP addresses or other reliable

source.

Signature:

Name / Title: Daniel Esteban Gonzalez / Manager

Phone: 7869728404

Email: collageinvestments@gmail.com

Date: 2021-08-09

Page 1 of 1

Rev.2.0