FCC ID: 2ATRMPR0D053 A vapour inhalation device

Quick Start Guide Table of Contents Box contents Charging you device Download the App Pairing your device Connecting a cartridge Personalizing a dose FAQ & Troubleshooting For additional information visit prodose.io. 2 3 4 5 6 7 8 1 I 2 Box Contents Charge Your Device Prodose base USB-C Charging Cord I 2 2 Connect your Prodose base to a power source using the included USB-C Cable for approx. 10 minutes. The device will have enough power for initial pairing, but will need roughly 2 hours to have a full charge. 3 5 Seconds Download the App Pair your Device Visit https://prodose.io/install to download to Prodose app. Press and hold the power button for 5 seconds. In your smartphone settings, make sure Bluetooth is turned on. The blue light will flash solid when your Prodose device has paired with your smartphone. 4 5 Connect a Cartridge Personalize Your Dose Unbox and gently connect your cartridge to the Prodose base. The LED lights will cycle yellow while validating your cartridge. A green light indicates your dose is ready to go, then press (and release) the main button to initiate a dose. In the Prodose App click the Edit Button within My Dosage. Drag the slider to desired dosage. Tap the Save Changes button to save the new dosage amount. 6 7 FAQ & Troubleshooting LED COLOR REFERENCE HOLDING THE POWER BUTTON Purple (cycling) Device is unlisted from any pairings and is searching for a Bluetooth connected handset to initiate Bluetooth pairing. Blue (cycling) Device is searching for a Bluetooth pairing. Yellow (cycling) Device is searching cartridge library for known details. Red (blinking x2) Cartridge has not successfully coupled, remove cartridge and reconnect waiting for solid green LED to indicate cartridge recognition. Green (solid) Battery is on Red (flashing) Battery has no power Red (solid) Power down Blue (flashing) Charging (while connected to charging cable) Blue (cycling) Bluetooth searching If your device is not responding, check your battery by pressing and releasing the power button. If no response, charge your battery for at least 15 min. 8 9 SETTING YOUR DOSE CARTRIDGE ISSUES FAQ & Troubleshooting From your dashboard, select Edit under My Dosage. Use your thumb to rotate the wheel, increasing or decreasing the dosage, until youve selected your desired milligrams. The dosage will be distributed over 1-3 inhalatations, dependent on the intensity level, as described below:

Low Intensity 1mg - 4mg Distributed in one inhalation. Medium Intensity 5mg - 8mg Distributed over two inhalations. High Intensity 9mg - 10mg Distributed over three inhalations. Tapping Save will return you to your home screen and activate your dose so its ready to use. The device is powered on and paired but the app reads no cartridge:

Remove the cartridge and reconnect, wait for a solid green LED to indicate it has recognized the cartridge. The device is powered on, not paired and the LED flashes red:

Remove the cartridge and reconnect, wait for a solid green LED to indicate it has recognized the cartridge. Cartridge uncoupled while dosing

(this will be indicated by a red LED flashing during the normal dosing sequence and the device emitted less-to-no vapor):

The device knows that this has happened and your dose will be ready when you reconnect the cartridge, waiting for a solid green LED to indicate cartridge recognition. 10 11

Safety Information Micro-USB 5v 3.3v Operating Voltage Bluetooth Connectivity Always read the instructions before use Intended for recommended usage Keep away from children The appliance is not intended for use by persons

(including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. The appliance is only to be supplied by Safety Extra Low Voltage (SELV). This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. This device complies with portable RF exposure requirements in accordance with FCC rule part 2.1093 and KDB 447498 D01 FCC ID: 2ATRMPR0D053 To access the E-Label Regulatory Information, without a login:

Step 1: Open the Mobile Application > Step 2: Click Terms

& Conditions Or once logged in to the app:

Step 1: Press Settings icon > Step 2: Terms & Conditions >

Step 3: Scroll to the bottom for regulatory information

FCC ID: 2ATRMPR0D053 To access the E-Label Regulatory Information, without a login:

Step 1: Open the Mobile Application > Step 2:

Click Terms & Conditions Or once logged in to the app:

Step 1: Press Settings icon > Step 2: Terms &

Conditions > Step 3: Scroll to the bottom for regulatory information

Columbia Care LLC 321 Billerica Rd, Suite 204 MA 01824 19th August 2019 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Authorisation Letter To whom it may concern Yours faithfully, David Hart COO - Columbia Care This is to certify that Columbia Care LLC hereby authorises UL VS Ltd. to act as the TCB for the application of the PR0D053, FCC ID:2ATRMPR0D053 to the FCC. We certify that we are not subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Columbia Care LLC 321 Billerica Rd, Suite 204 MA 01824 19th August 2019 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Permanent Confidentiality Request Certification Application FCC ID: 2ATRMPR0D053 To whom it may concern Pursuant to Sections 0.457(d) and 0.459 of CFR 47 , Columbia Care LLC request that the following information, provided to support the FCC application for the PR0D053, FCC ID: 2ATRMPR0D053 be held permanently confidential:

Schematics Block Diagrams Operational Description The above material contains trade secrets not customarily released to public that are judged to have the potential to cause detriment to the applicant and provide unjustified benefits to its competitors. This information should not be available for public disclosure for an indefinite period of time. Yours faithfully David Hart COO - Columbia Care

Columbia Care LLC 321 Billerica Rd, Suite 204 MA 01824 19th August 2019 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: Short Term Confidentiality Request FCC ID: 2ATRMPR0D53 To whom it may concern External Photos Internal Photos Test Set Up Photos User Guide In accordance with 0.457 and 0.459 of CFR 47, Columbia Care requests the short term confidentiality of the items listed below until 14th Jul 2020 for our device, FCC ID: 2ATRMPR0D053 These items contain proprietary information related to the design of the product which has not yet been released to the market. The public disclosure of this information prior to public launch may be harmful to Columbia Care and provide unjust benefits to its competitors. A period up to 14st Jul 2020 is requested to protect this information before formal market launch. If the launch date is re-scheduled to be earlier than 31st Jul 2020 >, Columbia Care will inform again to cancel this restriction. Please contact the undersigned if there are any further questions or additional information needed in this matter. Yours faithfully, David Hart COO Columbia Care