Bluetooth Wireless Headset User Manual To Charge the Battery Battery must bu fully charged before you use the first time, a, Connect charger cable to the charging socket on the headset b, Plug the Charger into wallA/Coutlet. c, Indicator light shows red, when fully charged, the red light will turn off. d, Disconnect charger From headset and from wall outlet. To Switch the Headset Power on/off a, To power on: press and hold answer/end key for about 3 seconds until blue and red flashes (or blue flashes). b, To power off: press and hold answer/end key for about 6 seconds, light will turn off. To Switch the Headset Power on/off a, To power on: press and hold answer/end key for about 3 seconds until blue and red flashes
(or blue flashes). b, To power off: press and hold answer/end key for about 6 seconds light will turn off. To Pair the Headset with a Bluetooth Enabled Phone a, Press and hold answer /end key until the indicator light turns blue. b, Set phone to search for Bluetooth device. c, When phone finds headset, confirm by selecting the headset from the list. d, Enter passcodeoooo when prompted by phone. in the pairing is successful, the indicator light will flash will flash blue 2 times. in some phones you may need to make the connection separately after pairing. See the user guide of your phone for details. e, Repeat steps b-d if the pairing was unsuccessful, you only need to pair once. f, If pairing was successful, indicator light start to flash blue, indication in standby mode and ready to make/receive call. To Answer a Call a, Press the answer key on your phone. b, Press the answer /end key on, headset briefly. To End a Call a, Press the answer key on your phone. b, Press the answer /end key on, headset briefly. c, Press the answer /end key on headset for about 1 second when phone is ringing. To Make a Call Dial the number from your phone, the press the answer/call key on your phone, call is automatically transferred to headset if paired. To Redial the Last Called Number Single press the answer/end key twice(2 short press)or press and hold the answer/end key for at least 2 seconds when headset is in standby mode. To Activate Voice Dialing a, Your phone must support this function, when in standby mode press and hold the answer/end key for 3 seconds. b, Say the name or number to dial, follow User Guide of your phone, record voice tages through headset for the best and the most accurate result. To Adjust Volume of Headset a, Press volume up key on your phone to increase/decrease volume b, Press volume down key on your phone to incresse/decrease volume To Store the Headset a, Power off the headset b, Temperature range:-10C/14F--60C/140F c, Do not expose the headset to rain or any liquids FCC Statement