Chitram Galaxy HD Quick User Guide Whats in the box?
Chitram Galaxy HD Remote Control (including batteries and a plastic tab) HDMI cable Ethernet cable Power adapter 2 3 Setting up your system
! Important: the power adapter is the last one to be connected (it should be plugged-in only after the HDMI and the Ethernet cables are plugged-in) Chitram Galaxy HD HDMI cable:
Connect the HDMI cable to Chitram Galaxy HD and to your TV Ethernet cable:
If you use a wired network, connect the cable to the Chitram Galaxy HD and to your router. If you use a wireless network you will be able to set it up during the welcome process (see page 8). Prepare the remote control:
Step : 1 Remove the plastic tab to enable battery contact before Using a 3.0mm at head screw driver, insert it into the ba ery lid slot Power adapter:
Connect the power adapter to your Chitram Galaxy HD and to the wall outlet 4 5 Remote control Control Side Keyboard Side Chitram Galaxy HD STBY content information last TV channel navigation buttons dashboard of your favorite activities user login system information mouse change the channel aspect ratio system menu socialize with your friends 6 toggles main menu letters / other characters 7 Completing the setup:
1. Turn on your TV, make sure its tuned to the same HDMI input your Chitram Galaxy HD is connected to 2. You will either see a Welcome screen, or a Comigo logo screen (if so, please wait about one minute for a Welcome screen to appear) 3. Continue following the on-screen instructions and you will be able to:
Set up your internet connection Adjust screen size to your TV
* Note: D uring the initial setup the Chitram Galaxy HD will reset itself. 4. Enter your Chitram TV user information 5. Chitram TV setup:
Choose your server Choose your picture quality (bitrate) Set necessary time shift Change code for restricted channels Congratulations you are now connected!
Pressing the Up/Down arrows on the 4-way navigation keys of the Remote Control will allow you to view the list of available channels Having trouble completing the guided setup?
Check out pages 12-13 8 9 Learn more about Chitram Galaxy HD Access Multimedia network or on a hard drive connected to your Chitram Galaxy HD:
whether its music, photos or personal content Browse the web and enjoy the wide variety of internet based content Access the VOD library Access Online Videos to watch videos which were shared by your friends in Facebook Explore and search for friends or content and other items, Control and more Enjoy some Android Apps Please note: Chitram Galaxy HD features are constantly being enhanced and enriched. Therefore, you will always be able to enjoy our new various features and capabilities as will be released from time to time. All you have to do is just keep your Chitram Galaxy HD plugged in and connected to the internet so that it can download the latest software updates automatically. 10 11 Troubleshooting Black screen? Your TV does not display a Comigo screen?
Make sure your TV input source matches the physical connection used to connect your Chitram Galaxy HD. Press the Input selection button (also called Source) on your TV or TV Remote to cycle through the various video inputs until you see a Comigo screen. You cannot see a picture on your TV?
Step : 1 1. Make sure your TV is turned on 2. Make sure all connectors are pushed in properly 3. Make sure that the Chitram Galaxy HD is connected to the power and turned on (front panel LED should be green) Cannot connect to your wireless home network during the setup?
1. For Wi-Fi operation you need to ensure that you have at least the minimum required signal strength. If you are not getting 2 or more signal-strength bars in thewireless network setup screen, then adjust the location of your Chitram Galaxy HD and/
or the location of your wireless router 2. Make sure there are no obstructions, like cement walls, between your Chitram Galaxy HD and your wireless router 3. Make sure you select Wireless and not Ethernet on the Network connection screen 4. Make sure you select the correct wireless router name 12 5. on the Network connection screen If your network has security-enabled then make sure you input the correct password (case-
sensitive) Changing the remote control batteries:
When the batteries are low, replace it with another CR2032 batteries Using a 3.0mm at head screw driver, insert it into the ba ery lid slot Step : 1 Using a 3.0mm at head screw driver, insert it into the ba ery lid slot Step : 2 Push toward the remote to open the Ba ery Lid Step : 2 Push toward the remote to open the Ba ery Lid 13 FCC part 15.19:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: RGE-CMGSBOF9C1 FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Step : 2 Push toward the remote to FCC part 15.21:
Warning: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Exposure to radio frequency energy:
This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requirements, only use supplied antenna. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a separation distance of at least 20 cm from all persons. INDUSTRY CANADA (IC) COMPLIANCE NOTICE This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement:
This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. AVIS DINDUSTRY CANADA (IC) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique de la classe B est conforme la norme NMB-003 du Canada. Dclaration dIndustrie Canada (IC) sur lExposition aux Rayonnements :
Cet quipement est conforme aux limites dexposition aux rayonnements dfinie par l'IC RSS-102 pour un environnement non contrl. Cet quipement doit tre install et utilis en gardant une distance minimale de 20 cm entre le systme radiant et vous. Intellectual Property and Other Notices The terms HDMI and HDMI High-Denition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories. COMIGO and any proprietary product or service names contained in this document are either trademarks or registered trademarks of Comigo Ltd. and may not be copied, imitated or used, in whole or in part, without the prior written permission of Comigo Ltd. All other trademarks, registered trademarks, product names, service names and company names or logos mentioned herein are the property of their respective owners. 14 15 Need help or assistance?
Just visit www.chitram.tv Rev-1 P/N: PAC200031