Comigo Duo Quick User Guide Whats in the box?
Comigo Duo Remote Control (including batteries and a plastic tab) HDMI cable Ethernet cable Power adapter 2 3 Setting up your system
! Important: the power adapter is the last one to be connected (it should be plugged-in only after the HDMI and the Ethernet cables are plugged-in) Prepare the remote control:
Step : 1 Remove the plastic tab to enable battery contact before using your remote control for the first time Using a 3.0mm at head screw driver, insert it into the baery lid slot Comigo Duo HDMI cable:
Connect the HDMI cable to Comigo Duo and to your TV Ethernet cable:
If you use a wired network, connect the cable to the Comigo Duo and to your router. If you use a wireless network you will be able to set it up during the welcome process (see page 12). Power adapter:
Connect the power adapter to your Comigo Duo and to the wall outlet 4 5 Remote control Control Side Keyboard Side mouse on/off change the channel aspect ratio system menu socialize with your friends Comigo Duo STBY content information last TV channel navigation buttons dashboard of your favorite activities user login system information special letters letters / other characters 6 7 Completing the setup:
1. Turn on your TV, make sure its tuned to the same HDMI input your Comigo Duo is connected to 2. You will either see a Welcome screen, or a Comigo logo screen (if so, please wait about one minute for a Welcome screen to appear) 3. Continue following the on-screen instructions and you will be able to: Set up your internet connection
Adjust screen size to your TV
* Note: During the initial setup the Comigo Duo will reset itself. 4. At this stage, information and system-introduction screens will appear 5. Choose your Comigo Duo name 6. Login to your Facebook account. If you dont have a Facebook account, press Skip. We recommend you to login later on, to enjoy the unique social and interactive features and capabilities of your Comigo Duo. Congratulations you are now connected!
Pressing the Up/Down arrows on the 4-way navigation keys of the Remote Control will allow you to view the list of available channels Having trouble completing the guided setup?
Check out pages 12-13 8 9 Learn more about Comigo Duo
Access Multimedia files residing on the wireless home content network or on a hard drive connected to your Comigo Duo:
whether its music, photos or personal content
Browse the web and enjoy the wide variety of internet based
Access the VOD library
Access Online Videos to watch videos which were shared by
Explore and search for friends or content and other items, your friends in Facebook Please note: Comigo Duo features are constantly being enhanced and enriched. Therefore, you will always be able to enjoy our new various features and capabilities as will be released from time to time. All you have to do is just keep your Comigo Duo plugged in and connected to the internet so that it can download the latest software updates automatically. whether in your personal files, VOD catalogue or in specific pre-defined websites
Control your network settings, user profiles, privacy settings
Enjoy some Android Apps and more 10 11 Troubleshooting
Black screen? Your TV does not display a Comigo screen?
Make sure your TV input source matches the physical connection used to connect your Comigo Duo. Press the Input selection button (also called Source) on your TV or TV Remote to cycle through the various video inputs until you see a Comigo screen.
You cannot see a picture on your TV?
1. Make sure your TV is turned on 2. Make sure all connectors are pushed in properly 3. Make sure that the Comigo Duo is connected to the power and turned on (front panel LED should be green)
Cannot connect to your wireless home network during the setup?
1. For Wi-Fi operation you need to ensure that you have at least the minimum required signal strength. If you are not getting 2 or more signal-strength bars in thewireless network setup screen, then adjust the location of your Comigo Duo and/
or the location of your wireless router 2. Make sure there are no obstructions, like cement walls, between your Comigo Duo and your wireless router 3. Make sure you select Wireless and not Ethernet on the Network connection screen 4. Make sure you select the correct wireless router name on the Network connection screen 5. If your network has security-enabled then make sure you input the correct password (case-
sensitive)
Changing the remote control batteries:
Step : 1 When the batteries are low, replace it Using a 3.0mm flat head screw driver, insert it into with another CR2032 batteries the battery lid slot Step : 2 Push toward the remote to open the Battery Lid 12 13 FCC part 15.21:
FCC WARNING Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC part 15.105:
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Connect the equipment into an outlet on a circuit Increase the separation between the equipment and receiver. different from that to which the receiver is connected.
Consult the dealer or an experienced radio TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. FCC ID: RGE-COMIGODUOOTT Exposure to radio frequency energy:
This device and its antenna must not be co-located or operated in conjunction with any other antenna or transmitter. To comply with FCC RF exposure requ irements, only use supplied antenna. The equipment complies with FCC RF exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with a separation distance of at least 20 cm from all persons. 14 15 Need more help? Go to:
www.comigo.com Rev-1 P/N: PAC200015