Home Network User Manual PMN: Wall PAD 1 1 Table of Contents Introduction .................................................................................................................................................. 3 Part name ............................................................................................................................................. 3 Display composition ........................................................................................................................ 4 Screen Saver ...................................................................................................................................... 5 Information provided from the screen saver ........................................................ 5 1.1. 2 Home Display .................................................................................................................................... 6 3 Notice ................................................................................................................................................... 7 4 Control ................................................................................................................................................. 8 4.1. FCU Control ......................................................................................................................... 8 Application ....................................................................................................................................... 10 5.1. Intercom .............................................................................................................................. 11 Security ................................................................................................................................ 14 5.2. Home History ................................................................................................................... 16 5.3. 5.4. ETC ......................................................................................................................................... 17 Away/Stay Mode ............................................................................................................................ 19 Appendix ........................................................................................................................................... 23 7.1. Using the Owner mobile app .................................................................................... 23 Using the Guest mobile app ...................................................................................... 27 7.2. Etc .......................................................................................................................................... 30 7.3. 7.4. Name Search(LOBBY PHONE) .....! . 6 7 5 2 Introduction Part name PoE PIR 1. Sensor_in, 2. GND, 3. VCC EM RS-485 1. TRX-, 2. TRX+, 3.GND DDL VCC (OPTION) DDL S/W (OPTION) TFT LCD Speaker Emergency button Call guard station Door release button Call button Home Button Microphone Power Switch 3 Display composition Buttons at the Bottom Press the button Go to Home Back 4 1 Screen Saver We will provide information on the screen sequentially Press the screen saver to go to the home screen. 1.1. Information provided from the screen saver
[Today's weather information]
[Indoor humidity]
[Indoor temperature]
[Notice]
Weather information should be connected to the external Internet to the server. It is not provided when there is no information. 5 2 Home Display Visitor Log Concierge Away Stay Notice Apps Emergency Cameras Check recorded images of visitors Calling the guard station Away mode Stay mode Notice The list of installed apps Panic alert CCTV Camera 6 You can check the notices 3 Notice
[Notices]
7 4.1. FCU Control FCU Control 4 Control 1) Go to the [Indoor] tab. 2) If cold/heating is in operation, the activated image is displayed, and if it do not work, the disabled image is displayed. 3) You can turn on / off all cooling / heating machines by pressing the power button of "whole air conditioning / heating". 4) You can enable or disable all cold / heater exit mode by pushing "go out"
button of "whole air conditioning / heating". 5) You can turn on / off the cooling / heating by pressing the power (1) button of the controlling cold / heater. 6) You can set temperature at one degree difference by pressing the button() . 7) The current temperature is displayed.
[FCU Control]
8 FCU Away mode 1) Go to the [Indoor] tab 2) Press the More button 3) Press the "ON" button in the go-out mode to set the go-out mode. Both the cold / heater will be turned off. 4) Pressing the "OFF" button in the go-out mode releases the go-out mode. The cold / heating machine will return to the status before going out.
(When you turn on / off the power from away mode setting, you will be automatically unlocked.) Change the FCU mode 1) Press the "cooling" button to set the mode for cooling. 2) Press the "Heating" button, the mode is set for heating. 9 5 Application 10 5.1. Intercom Guard Calling the security guard station
[The screen of calling connection and calling screen]
Active Call and Call Waiting Display of calling connection Volume Call Start Call refusal, Cancel Door Open Save of Visitor image Call display can be displayed differently by each type of call from guard station and entrance Some equipment does not provide CID function. Visitors image can be saved in the storage space. Images can be stored by 128 cuts. (188MByte standards) The file is same space for visitors image and CCTV Image. Internet telephone cannot be used 11 5.1.1. Common entrance Open the door for common entrance 1) During the called of individual and common entrance please press
(Door Open) the button. Recording visitors image from common entrance 1) Press Capture an image button while paging or calling. 2) If successfully recorded, the visitor's photos which are confirmed visitors on the home screen will be displayed. Pick up the phone from Common Entrance 1) 2) 3) The visitor will be displayed on the screen with bell sounds If pick up the phone please press button or please reject button. If hang up the phone please press the button. 12 5.1.2. Guard station Calling a guard station Calling a guard station 1) 2) To call a guard station, touch Guard station icon or touch Guard station button in dialing mode To hang up a call, touch End call button. Receiving a call from a guard station 1) When the call is received from a guard station, the touch panel rings and displays a guard station icon on the screen. 2) 3) To receive a call, touch button. To hang up a call, touch End call button.
(Call) button. To reject a call, touch Cancel Security office and management office cannot see the users image. The guard video call is only available for products with video call cameras If you use the call transfer function during the guard station call, the guard station call is automatically terminated Setting of security office -> Connect to COMMAX and control -> setting to number -> Security and management office can be settled. Call switching function 1) 2) If someone calls you during a calling, it will be displayed on the screen. Touch disconnected as you switch the call
(Switch call) button to answer the call. The previous call is Some devices do not provide CID functionality (Caller ID). Call transfer is not supported on some calls 13 5.2. Security Emergency operation Emergency in emergency situation Access control Access control 5.2.1. Emergency Emergency occurrence Emergency sensing An emergency occurs by the user or occurs automatically by the sensor Touch Emergency button to send a notice of an emergency to Guard station. The emergency notice is processed in three steps such as On, Off, and Reset Emergency on 1) Emergency can be generated by pressing the emergency icon or by pressing the emergency button on the front of the product. Or automatically by the sensor 2) Emergency type is displayed at the top of the screen with a siren sound
[Emergency]
Emergency stop 1) Touch Stop button located at the bottom of Emergency screen. 2) Put the password (default password is 1234) and then press enter. 14
[Password input]
15 5.3. Home History Viewing recorded images of visitors Visitor Log 5.3.1. Visitors Viewer Viewing recorded images of visitors from common entrance.
[Viewing recorded images of visitors]
Delete Delete selected images You can see where the picture was taken with the icon. My house Picture taken at my house Common entrance Images taken from an common entrance Out In case of go-out
(Go out mode settings) Viewing recorded images In viewing a visitor mode, all recorded images from a common entrance can be checked including time and date information. You can also check visitors if you set out. 16 Deleting recorded images 1) Touch Delete button. 2) Select images or all the images by checking Select all box. 3) Touch once more to uncheck the images or Select all box. 4) Touch Delete button to delete selected images. 5.4. ETC Settings Sign Up 5.4.1. Sign Up Settings User registration User registration/ Edit / Reset 1) 2) 3) Enter your ID and touch ID check button to check for validity Select your country Enter your password and touch Confirm button.
[Sign Up]
17 initialize 1) If membership has been registered, pressing the "Reset" button deletes the registered member information. 18 6 Away/Stay Mode
[Away mode]
[Sraty mode]
19 6.1.1. Away Away Mode The status display of going out setting When you go out, you can set up these functions security sensor, visitor recording, light off, close gas valve, indirect call etc. Away mode setting 1) Press the icon, away mode will be started. 2) The away mode will be executed automatically after the specified away delay time. If you want to cancel away mode, press CANCEL button. 3)
[Go Out mode set-up]
1.Delayed time for go-out 3.Start away mode 2.Action item when going out If security mode is on, away mode cannot be started. Return home sensor delay setting is set by setting -> user option -> delayed from adjusted go out time. Set Go Out mode 1) Set items to be executed when go out mode 2) Press the Option button on the setting screen of go out mode, the setting screen of go out mode is displayed. 3) Check the use security sensor and execution item to use. 20 4) Press confirm button to save. Restore Go Out mode 1) Press Go Out mode button 2) When it appears on the password input screen, enter the password and click the 'confirm' button. If the passwords match, go out mode will be canceled. 3) 21 6.1.2. Burglar sensor settings burglar sensor settings on burglar sensor settings off This function will be activated when the security devices have been installed. You can set the using security sensors in Setting>Connections COMMAX>
Sensors. Burglar sensor settings 1) Check the security sensor to be set by pressing the 'Areas ()' button. 2) After settings, press (set) and the burglar sensor in adjusted area will be started.
[Burglar sensor settings]
The number of burglar sensor settings images will be displayed as many as the number of adjusted sensors. Restore the burglar sensor 1) Press the 'Burglar sensor settings' button 2) 3) Input the password and press the 'confirms'
If password is correct, the security mode will be restored 22 7 Appendix 7.1. Using the Owner mobile app Login 1) Enter the ID and password that you registered to in the Wallpad 2) Press the "Login" button. 3) Enter your nickname and Press the 'OK' button. 4) In the home screen, you can select "Call Log",
"Checking visitors", and "Setting". 23 Issuing Access Keys 1) Press the 'Apps' button on the home screen. 2) Press the Access Control button. 3) Press the Doors management button. 4) Press the "+" button and the 5) access key will be issued. 6) 7) 24 If there is more than one key that has been issued, you can move it by checking the left / right page. The expiration date of the access key is displayed. If not recognized automatically, press the "Open door" button to open the door. Guest Visit Key Issued the Visitor registration 1) Press button. 2) Press the Request button. 3) The issued authentication key will be notified by phone or SMS to the guest within 3 minutes. 4) When the validity time has elapsed, the authentication key is reissued. 5) Press the Visitor management 7) Press the Issuing a key button button. 6) After the guest registers, if you enter the authentication key, Guest is displayed in Visitor management. 8) You can set the visitor's visit time.
- One-time visit
-
-
Period visit Time setting within a period 25 The visitor access notice message When an owner and guests visit, a push message is provided on the mobile. Notification push messages is displayed as nickname entered you signed up. 26 7.2. Using the Guest mobile app Login 1) Press the Visitor Sign-in button. 2) Enter Visitor Name, ID, Password, Retype password. 3) Press the Next button. 4) Press the Login button when the registration is completed. 27 5) Enter the nickname to use and Press the Confirm button. 28 Request a visit key 1) Press the "+" button to request a visit key. 2) Enter the authentication key received from the owner. 3) When the owner confirms and releases the access key, the access key is displayed. 4) 5) The expiration date of the access key is displayed. If not recognized automatically, press the
"Open door" button to open the door. 29 7.3. Etc Door Open 1) 2) 3) Touch the keypad on the door lock (DDL). If the "Auto Setup" is set, the door automatically opens. If "Auto Access" has not been set, you can press the
"Door open" button on the Mobile Appliance to enter or exit. Door lock(DDL) setting Setting Manual Lock 1) Touch the keypad of the door lock (DDL). 2) Enter the password for the door lock. (Ex)) password:
2580) 3) Enter #+#+7.
(Ex: 2580##7) Setting Auto Lock 1) Touch the keypad of the door lock (DDL). 2) Enter the password for the door lock. (Ex)) password:
2580) 3) Enter #+#+4.
(Ex: 2580##4) If you set the door lock (DDL) manually, you must touch the keypad to lock the door when closing the door lock 30 PRODUCT MODLE SPEC LINE VOLTAGE CIP-700MW UTP (CAT.5e) INPUT : PoE DC 48V TELECOMUNNICATION AUDIO : VoIP, VIDEO : H.264 LINE & DISTANCE TEMPERATURE SPECIFICATION STANDARD UTP (CAT.5e) 70m
(FROM THE PSE) 0 +40 CPU Dual-Core ARM Cortex-A7 MEMORY 1G DDR3 RAM (512M *2) FLASH LCD POWER 4G eMMC Flash 7 TFT LCD, 800 x 480 PoE 31 INSTALLATION PACKAGE CONTENTS. MONITOR (CIP-700MW) WALL BRACKET MANUAL
(T) 4 x 18mm
(M) 3 x 6mm WALL BRACKET MOUNTING SCREW(4EA) MONITOR FIXING SCREW(1EA) 3P(1EA)/2P(1EA) CONNECTOR 32 FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment on and off, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antennae Increase the separation between the equipment and the receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Caution Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. 33 This equipment should be installed and operated with minimum 20 cm between the radiator and your body. Cet quipement doit tre install et utilis avec un minimum de 20 cm entre le radiateur et votre corps. Industry Canada Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Dclaration de conformit IC (Industrie Canada) Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
(1) Cet appareil ne doit pas crer d'interfrences.
(2) Cet appareil doit accepter toutes les interfrences reues, y compris celles qui pourraient entraver son bon fonctionnement. 34