User Manual
&,270
Thank you for purchasing COMMAX products. Thank you for purchasing COMMAX products. Please carefully read this Users Guide (in particular, precautions for safety) before using a product and follow Please carefully read this Users Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. instructions to use a product exactly. The company is not responsible for any safety accidents caused by abnormal operation of the product. The company is not responsible for any safety accidents caused by abnormal operation of the product.
1 Safety Warning & Caution Please follow the things described below in order to prevent any danger or property damage. Warning It may cause a serious damage or injury if violated. Prohibition. No disassembly No touch Must follow strictly. Caution It may cause a minor damage or injury if violated. Shows plugging out the power cord without an exception Shows the warning and caution for an electric shock. Shows the warning and caution for a fire. Warning Please dont use several products at the same time on one power socket.
It may cause a fire due to an Please dont bend the power cable excessively or it may cause an electric shock.
fire when using a damaged Please dont handle the power cable with a wet hand.
It may cause an electric shock. abnormal overheating. power cable. Please plug out the power cable from the socket when not using it for a long period of time.
It may shorten the product lifespan or cause a fire. n o i t a l l Please dont install the product in the place where there is much oil, smoke or humidity.
It may cause an electric shock or fire. Please dont install the product with the lightening and thunder.
It may cause an electric shock or fire. Please dont use and connect this product with other products with different rated voltage
It may cause a disorder or fire. When installing the product that generates heat, please install the product away from the wall (10cm) for the ventilation.
It may cause a fire due to internal increased the temperature. a t s n I
&
r e w o P 2 Warning Please dont disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed.
It may cause an electric shock or fire. If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center.
It may cause an electric shock or fire. Please dont insert any metallic or burnable materials into the ventilation hole.
It may cause an electric Please use only the designated batteries for the products of using DC power.
It may cause an electric shock or fire. shock or fire. e s U
&
g n n a e C i l Caution Please plug the power cable firmly into the inner end
It may cause a fire. Please hold the plug tightly when unplugging the power cable (a part of the copper wire may be disconnected if the grabbing is only made on the cord when pulling out the cable).
It may cause an electric shock or fire When connecting the power cables after cutting the cable, please install the product with power off
It may cause an electric shock or fire When installing the product, please fix it firmly while using the wall-mounting unit and screws.
It may cause an injury from the falling object. n o i t a l l a t s n I
&
r e w o P e s U
&
g n n a e l C i Please be careful when using an AC circuit breaker since there is a possibility of an electric shock. Please check the use voltage and current for the DC-only products the appropriate rectifier.
It may cause a fire. and use Please avoid direct rays of the sun or heating devices at a time of installation.
It may cause a fire. Please dont install the product on an unstable place or small support board.
It may cause an injury if it falls down while in use. When cleaning the product, please rub it with a soft and dry cloth after plugging out the power cable. (Please dont use any chemical products such as wax, benzene, alcohol or cleanser.) Please dont drop the product on the ground and dont apply a shock .
It may cause a failure. Please use the designated connection cable within the maximum calling distance designated for the product
It may reduce the product performance. 3
Voice call to guard station by IP network
4
x
5
6
The navigation bar of home screen bottom
7
Home screen bottom setting bar
8
9
dial
Dial key for call
10
.
Adding Space
11
Select a space image
12
.
13
14
You can move to the desired location by pressing the device you want to move
. 15
.
16
. 17
.
.
18
19
.
dit "buttonu Press the "(On / Off)" button and you can select the value information item to be displayed.
.
20
21
Press the power button of the lighting you want to control to turn the light on or off
22
Magnetic sensor
Go to the Safety tab
23
24
Change the device nickname
Remove device
Select the device you want to delete
25
26
27
Saving the image of our house / common entrance visitor
.
. 28 Call house
29
5.4.1.
5.4.2.
30
5.4.3.
5.4.4.
5.4.5.
31
32
33
34
35
36
37
38
39
x x x
40
41
42
43
44
45
46
47
48
49
50
51
52
53
FCC approval This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This device should be installed and operated with minimum 20 cm between the radiator and your body. This device contains certified modules. Contains FCC ID: CCEW8188R511K Contains FCC ID: CCECMX-ZG03 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Intl Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com 300
Printed In Korea / 2016.03.104 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Intl Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133
Web site : www.commax.com 300
Printed In Korea / 2016.03.104