GB737 GB737 Bluetooth GPS Receiver User manual Version 1.0 Introduction Tel: +886-2-8751-8598 Email: service@cpss.com.tw Fax: +886-2-8797-3898 Web: http://www.cpss.com.tw No part of this Users Manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying recording ,for any purpose other than the purchasers personal use, without the written permission of Compass Systems Corp. Information in this Users Manual is subject to change without notice. Compass Systems Corp. reserves the right to change or improve or modify its products and to make changes to the content without obligation to notify any person or organization of such changes. Copy right 2007 by Compass Systems Corp. All rights reserved. Printed in Taiwan i Introduction WARNINGS WARNINGS Some certain knowledge is required to be well known by the user for proper and safe use Some certain knowledge is required to be well known by the user for proper and safe use of Navibe Bluetooth GPS receiver. Please read this Users Manual first before operation. of Navibe Bluetooth GPS receiver. Please read this Users Manual first before operation. Because Navibe Bluetooth GPS receiver is an assistant device, it will NOT undertake any Because Navibe Bluetooth GPS receiver is an assistant device, it will NOT undertake any legal responsibility for any accident or damage caused by the users wrong operation legal responsibility for any accident or damage caused by the users wrong operation and/or wrong judgement in navigating with Navibe. and/or wrong judgement in navigating with Navibe. ii Introduction CAUTION CAUTION The Global Positioning System(GPS) is a system of 24 satellites which circle the earth The Global Positioning System(GPS) is a system of 24 satellites which circle the earth twice a day in a very precise orbit and transmit information to earth. The Navibe unit twice a day in a very precise orbit and transmit information to earth. The Navibe unit must continuously find at least three of these satellites to calculate your position and must continuously find at least three of these satellites to calculate your position and your movement. your movement. This GPS system is operated by the government of the United States, which is solely This GPS system is operated by the government of the United States, which is solely responsible for its accuracy and maintenance. Any changes of the system could affect responsible for its accuracy and maintenance. Any changes of the system could affect the accuracy and performance of all GPS equipment. the accuracy and performance of all GPS equipment. PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE. PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE. PLEASE CHARGE BATTERY FULLY BEFORE INITIAL USE.
(When fully charged, red--color battery LED will automatically switch off.) color battery LED will automatically switch off.)
(When fully charged, red
(When fully charged, red-color battery LED will automatically switch off.) iii Introduction Navibe Bluetooth GPS Receiver!!
Thank you for choosing Navibe Bluetooth GPS Receiver Thank you for choosing
------it can be your best friend!
it can be your best friend!
Take it now ------
Take it now Application Conditions:
Navibe is designed for outdoors navigation in the temperature range of -20C~ 60C. Because of the built-in battery, please dont heat or leave the receiver in high temperature environment or direct sunshine for a long period of time. Introduction section gives you a general overview of Navibe features. Reference section tells how to operate the unit correctly and how to connect this unit to your pocket PC step-by-step. If you find something missing or damaged with the reference to the standard package, please contact the local dealer or retailer. iv Chapter I Introduction Section 1 Announcement Section 2 Warnings Section 3 Caution Section 4 Welcome to Navibe Section 5 Table of Contents Chapter II Reference Section 1 Hardware Description Section 2 State Table of LED Section 3 Operation Section 4 Packet PC Setup Section 5 Pair GB737 to your Packet PC Appendix FCC statement Introduction i ii iii iv v 1 2 3-4 5-9 10-14 v Reference Section 1.. Hardware Description Hardware Description Section 1 Hardware Description 1 Section 22. State Table of LED State Table of LED Section GPS Status LED (Green) Reference Green ON Description Looking for Satellites Green Flashing Battery Status LED ( Red and Orange ) Satellites lucked Red ON Orange ON LED OFF Description Low Power Charging Battery Charged Bluetooth Status LED (Blue) Blue Flashing Blue ON Description Bluetooth Connected Wait for Bluetooth pairing 2 Reference Section 3. Operation --11 Section 3. Operation Turn on To turn on the receiver, press the power buttons on side for a few seconds until the GREEN GPS LED
& BLUE Bluetooth LED indicators switch on. Turn off 1) To turn off the receiver, press the power switch on side for a few seconds until BLUE Bluetooth LED indicators switch off. 2) Auto power-off if Bluetooth is not connected to and host devices within 10 minutes for power-saving. Satellite Status The receiver will look for satellites automatically once power on and indicate the status by LED status. 3 Section 3. Operation --22 Section 3. Operation Reference Bluetooth Device You may start to pair the receiver to a Bluetooth device when the LED indicator steady ON. When successfully connected to a Bluetooth device, the Bluetooth indicator will flash regularly. Make sure your Pocket PCs are ready for Bluetooth connections before device pairing. Low Power Charging When the power becomes low, the mini-USB power jack allows you to connect the device to a power source to recharge the internal battery. When fully charged, the indicator will auto switch off. Quick Shut Off To shut off the system rapidly when it responds slowly. 4 Reference Section 4. Pocket PC Setup
. Pocket PC Setup Section 4 Pocket PC Setup 5 1. Tap the Bluetooth icon on screen. 2. Select Bluetooth Manager Section 4. Pocket PC Setup
. Pocket PC Setup Section 4 NoteNote: : Make sure connecting to your Pocket PC.. connecting to your Pocket PC Pocket PC Setup Make sure BT receiver is in pairing mode BT receiver is in pairing mode before before Reference 3. Tap the New & Connect! in My Shortcuts screen. 4. Select Explore a Bluetooth device
& tap Next in Connection Wizard screen 6 Reference Section 4. Pocket PC Setup
. Pocket PC Setup Section 4 Pocket PC Setup 7 5. Follow the instruction or await for a while. 6. Tap BT GPS V20 to continue. Section 4. Pocket PC Setup
. Pocket PC Setup Section 4 Pocket PC Setup Reference 7. Select SPP service and tap Next. 8. Tap Finish to close this program. 8 Reference Section 4. Pocket PC Setup
. Pocket PC Setup Section 4 Pocket PC Setup 9 9. Tap Connect to activate the connection in My Shortcuts screen. 10. Key in the Passkey 0000 then tap OK Section 5. Pair GB737 to your Pocket PC Section 5. Pair GB737 to your Pocket PC Reference Pocket PC Setup NoteNote: : Make sure your before device pairing. before device pairing. Make sure your Pocket PC Pocket PC Bluetooth connection Bluetooth connection is ON is ON 1. Tap the Bluetooth icon on main screen. 2. Select Bluetooth Manager 10 Reference Section 5. Pair GB737 to your Pocket PC Section 5. Pair GB737 to your Pocket PC Pocket PC Setup 11 3. Tap Tools then select Paired devices in My Shortcuts screen. 4. Tap Add Section 5. Pair GB737 to your Pocket PC Section 5. Pair GB737 to your Pocket PC Reference 3. Tap icon to look up Bluetooth devices. 4. Tap the device ID name BT GPS V20 to continue. 12 Reference Section 5. Pair GB737 to your Pocket PC Section 5. Pair GB737 to your Pocket PC 13 5. Key in the passkey 0000 to start pairing. 6. Adding BT GPS V20 to device list. Section 5. Pair GB737 to your Pocket PC Section 5. Pair GB737 to your Pocket PC Reference 7. You may find the BT GPS V20 in the Paired devices screen. 14 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the users authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions:
1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Compass Systems Corp. Tel: +886-2-8751-8598 Fax: +886-2-8797-3898 Email: service@cpss.com.tw http://www.cpss.com.tw Copy right 2007 by Compass Systems Corp. All rights reserved. Printed in Taiwan