Dual Band 2.4/5GHz WiFi + Bluetooth Combo M.2 Module Designed for WLAN/BT and Low-Energy Communications Model: WLT674 KEY FEATURES Qualcomm Atheros QCA6174A-5. Supports 2x2 multi-user multiple input, multiple output (MU-MIMO) with two spatial streams. Supports IEEE 802.11a/b/g/n/ac WLAN standards. Enables seamless integration of WLAN/
Bluetooth and low energy technology. Provides a highly integrated WLAN system-on-
chip (SoC) for 5GHz 802.11ac, or 2.4GHz / 5GHz 802.11n WLAN applications. Supports Bluetooth 4.1 + HS, BLE, and ANT+ and backward compatibility with BT 1.2 and BT 2.X +
enhanced data rate. Supports BT-WLAN coexistence and ISM-LTE coexistence. Supports Simple Pairing (SP) and Enhanced Inquiry Response (EIR) function. HCI USB interface to work with Windows upper layer stack. APPLICATIONS Medical devices, security systems, robots, video streaming, PoS, digital signs, gaming machine, medical equipment, tablet PCs, handheld devices, thin client devices. QCA6174A-5 MiniPCIe 2.1 interface USB 1.1 interface 3.3 V DC power supply and I/O supply of 1.8 V or 3.3 V 2.412 GHz to 2.483 GHz, 5.150 GHz to 5.850 GHz,
*Subject to local regulations Last Updated: 24/08/18 Specifications Chipset WLAN Host Interface Bluetooth Host Interface Operating Voltage WLAN Frequency Range wireless modules Additional Specifications Standards for WLAN Standards for Bluetooth Channel Spectrum Widths for WLAN Data Rates for WLAN Max Data Rates for WLAN Data Rates for Bluetooth Form Factor Antenna Modulation Techniques Power Consumption Driver Support Security Environmental Temperature Environmental Humidity, non-condensing Dimensions (W H D) Weight IEEE 802.11ac/a/b/g/n (2T2R) Bluetooth V4.1, V4.0 LE, V3.0+HS, V2.1+EDR Supports 20/40MHz at 2.4GHz Supports 20/40/80MHz at 5GHz 802.11b : 11Mbps 802.11a/g : 54Mbps 802.11n : MCS 0 to MCS 15 802.11ac : MCS 0 to MCS 9 300Mbps on 802.11n networks 867Mbps on 802.11ac networks 1Mbps, 2Mbps, and up to 3Mbps M.2 2230, Key A+E 2x U.FL connectors, 2T2R Support WiFi/BT co-existence 802.11b : DSSS (DBPSK, DQPSK, CCK) 802.11a/g : OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11n : OFDM (BPSK, QPSK, 16-QAM, 64-QAM) 802.11ac : OFDM (BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM) TX : 610 mA RX : 280 mA Linux with ath10k, Windows 7/8.1/10 64/128-bits WEP, WPA, WPA2, 802.1X Operating : -20 C to 70 C ; Storage : -40 C to 85 C Operating : 5 % to 95 % ; Storage : 5 % to 90 %
(30 mm 26.8 mm 3.05 mm) 0.5 mm 6 g 2 Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 24/08/18 WH HB wireless modulesCopyright Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. RF Performance Table Data Rate TX Power
(per chain) TX Power
(2 chains) Tolerance Data Rate RX Specifications Sensitivity Tolerance 2.4GHz 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 2.4GHz 802.11n HT40 5GHz 802.11a 5GHz 802.11n HT20 5GHz 802.11n HT40 5GHz 802.11ac HT80 11Mbps 18dBm 21dBm 2dB 54Mbps 15dBm 18dBm 2dB MCS 7 15dBm 18dBm 2dB MCS 7 15dBm 18dBm 2dB 54Mbps 10.5dBm 13.5dBm 2dB MCS 7 10dBm 13dBm 2dB MCS 7 10dBm 13dBm 2dB MCS 9 6dBm 9dBm 2dB 2.4GHz 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 2.4GHz 802.11n HT40 5GHz 802.11a 5GHz 802.11n HT20 5GHz 802.11n HT40 5GHz 802.11ac HT80 11Mbps
-76dBm 2dB 54Mbps
-65dBm 2dB MCS 7
-64dBm 2dB MCS 7
-61dBm 2dB 54Mbps
-65dBm 2dB MCS 7
-64dBm 2dB MCS 7
-61dBm 2dB MCS 9
-51dBm 2dB Bluetooth 3Mbps 4~10dBm
-
2dB Bluetooth 3Mbps
-70dBm (0.1% BER) 2dB 3 Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 24/08/18 WH HB wireless modulesCopyright Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc.Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. Packaging Content Item WLT674 Wireless Module Quantity 1 Ordering Configuration Item Code WLT674 1.00 7A0000-TE
(Prototype) Chipset QCA6174A-5 Form Factor Card Information M.2 2230, Key A+E 2.4/5GHz WiFi + Bluetooth Packaging Information Packaging Type Packing Box (100 units) Carton Box (5 Packing Boxes / 500 units) Dimensions 385 mm x 207 mm x 76 mm 422 mm x 410 mm x 240 mm Weight 0.68 kg 4.1 kg Dimensional Weight TBD TBD Last Updated: 24/08/18 wireless modules Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device meets all the other requirements specified in Part 15E, Section 15.407 of the FCC Rules. Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This device is intended only for OEM integrators under the following conditions:
1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains FCC ID:
TK4WLT674. The grantee's FCC ID can be used only when all FCC compliance requirements are met. Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Industry Canada statement:
This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement:
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. This device is intended only for OEM integrators under the following conditions: (For module device use) 1) The antenna must be installed such that 20 cm is maintained between the antenna and users, and 2) The transmitter module may not be co-located with any other transmitter or antenna. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required with this module installed. Cet appareil est conu uniquement pour les intgrateurs OEM dans les conditions suivantes: (Pour utilisation de dispositif module) 1) L'antenne doit tre installe de telle sorte qu'une distance de 20 cm est respecte entre l'antenne et les utilisateurs, et 2) Le module metteur peut ne pas tre complant avec un autre metteur ou antenne. Tant que les 2 conditions ci-dessus sont remplies, des essais supplmentaires sur l'metteur ne seront pas ncessaires. Toutefois, l'intgrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformit supplmentaires requis pour ce module install. IMPORTANT NOTE:
In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the Canada authorization is no longer considered valid and the IC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate Canada authorization. NOTE IMPORTANTE:
Dans le cas o ces conditions ne peuvent tre satisfaites (par exemple pour certaines configurations d'ordinateur portable ou de certaines co-localisation avec un autre metteur), l'autorisation du Canada n'est plus considr comme valide et l'ID IC ne peut pas tre utilis sur le produit final. Dans ces circonstances, l'intgrateur OEM sera charg de rvaluer le produit final (y compris l'metteur) et l'obtention d'une autorisation distincte au Canada. End Product Labeling This transmitter module is authorized only for use in device where the antenna may be installed such that 20 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following: Contains IC:
7849A-WLT674. Plaque signaltique du produit final Ce module metteur est autoris uniquement pour une utilisation dans un dispositif o l'antenne peut tre installe de telle sorte qu'une distance de 20cm peut tre maintenue entre l'antenne et les utilisateurs. Le produit final doit tre tiquet dans un endroit visible avec l'inscription suivante: "Contient des IC: 7849A-WLT674 ". Manual Information To the End User The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Manuel d'information l'utilisateur final L'intgrateur OEM doit tre conscient de ne pas fournir des informations l'utilisateur final quant la faon d'installer ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intgre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations rglementaires requises et avertissements comme indiqu dans ce manuel. Caution :
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
(ii) the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit;
(iii) the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate; and
(iv) the worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
(v) Users should also be advised that high-power radars are allocated as primary users
(i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. Avertissement:
Le guide dutilisation des dispositifs pour rseaux locaux doit inclure des instructions prcises sur les restrictions susmentionnes, notamment :
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
(ii) le gain maximal d'antenne permis pour les dispositifs utilisant les bandes de 5250 5 350 MHz et de 5470 5725 MHz doit tre conforme la limite de la p.i.r.e;
(iii) le gain maximal d'antenne permis (pour les dispositifs utilisant la bande de 5 725 5 850 MHz) doit tre conforme la limite de la p.i.r.e. spcifie pour l'exploitation point point et lexploitation non point point, selon le cas;
(iv) les pires angles dinclinaison ncessaires pour rester conforme lexigence de la p.i.r.e. applicable au masque dlvation, et nonce la section 6.2.2 3), doivent tre clairement indiqus.
(v) De plus, les utilisateurs devraient aussi tre aviss que les utilisateurs de radars de haute puissance sont dsigns utilisateurs principaux (c.--d., quils ont la priorit) pour les bandes 5250-5350 MHz et 5650-5850 MHz et que ces radars pourraient causer du brouillage et/ou des dommages aux dispositifs LAN-EL. DETACHABLE ANTENNA USAGE This radio transmitter (IC: 7849A-WLT674 / Model: WLT674) has been approved by ISED to operate with the antenna type listed below with maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (IC: 7849A-WLT674 / Model: WLT674) a t approuv par ISED pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur.