WIRELESS-AC 2X2 27DBM NETWORK MINI PCIE ADAPTER Model: WLE600V5-27ESD ac wave series Features Qualcomm-Atheros QCA9882,Peregrine Series Maximum 27dBm output power (per chain), 30dBm (aggregate) IEEE 802.11ac complaint & backward compatible with 802.11a/n 2X2 MIMO Technology & up to 867Mbps MiniPCI Express 1.1 interface Supports Spatial Multiplexing, low-density parity check (LDPC), Maximal Ratio Combining (MRC), Space Time Block Code (STBC) Supports IEEE 802.11d, e, h, I, k, RO, v time stamp, and w standards Cards are individually calibrated for Quality Assurance Supported by either CompexWRT with Atheros Reference Wireless Driver OR OpenWRT with ath10k Wireless Driver on WPJ344 Applications(combined with WPJ344) Indoor AP Outdoor AP 802.11ac/an CPE 802.11ac/an Point to Point Base Station Technical Specifications Chipset Host Interface Operating Voltage Power Consumption Antenna Connector Frequency Range Modulation Techniques RoHS Compliance Temperature Range Humidity Dimensions (mm) System Information QCA9882,Peregrine Series PCI-Express 1.1 Standard 3.3 VDC, 5V (compulsory and external)1 7.4W 2 x MMCX Antenna Connector 5.150 ~ 5.250, 5.725 ~ 5.850 GHz OFDM: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Yes Operating: -20C to 70C;
Storage: -40C to 90C Operating:5% to 95% (non-condensing) Storage: Max.90% (non-condensing) 50.95 x 50 x 3.2 (H x W x D) 802.11a 5GHz 11n/ac HT40 802.11a 5GHz 11n/ac HT40 Data Rate 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 TX Power
(per chain) 27dBm 27dBm 27dBm 27dBm 27dBm 25dBm 25dBm 24dBm 27dBm 26dBm 26dBm 25dBm 25dBm 25dBm 24dBm 23dBm 23dBm 22dBm TX Power
(2 chains) 30dBm 30dBm 30dBm 30dBm 30dBm 28dBm 28dBm 27dBm 30dBm 29dBm 29dBm 28dBm 28dBm 28dBm 27dBm 26dBm 26dBm 25dBm DataRate Sensitivity TX Specifications Tolerance 5GHz 11n/ac HT20 5GHz 11ac HT80 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB RX Specifications Tolerance Data Rate MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 TX Power
(per chain) 27dBm 26dBm 26dBm 25dBm 25dBm 25dBm 24dBm 23dBm 23dBm 22dBm 27dBm 26dBm 26dBm 26dBm 26dBm 25dBm 25dBm 24dBm 23dBm 22dBm TX Power
(2 chains) 30dBm 29dBm 29dBm 28dBm 28dBm 28dBm 27dBm 26dBm 26dBm 25dBm 30dBm 29dBm 29dBm 29dBm 29dBm 28dBm 28dBm 27dBm 26dBm 25dBm Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB DataRate MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 Sensitivity
-94dBm
-94dBm
-92dBm
-88dBm
-84dBm
-81dBm
-78dBm
-77dBm
-74dBm
-71dBm
-89dBm
-88dBm
-85dBm
-81dBm
-79dBm
-75dBm
-74dBm
-72dBm
-70dBm
-68dBm Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 5GHz 11n/ac HT20 5GHz 11ac HT80 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9
-94dBm
-94dBm
-94dBm
-92dBm
-89dBm
-86dBm
-82dBm
-80dBm
-93dBm
-91dBm
-90dBm
-85dBm
-82dBm
-78dBm
-77dBm
-75dBm
-73dBm
-71dBm 1 Customers have to connect a 5V power supply to the pin on WLE600V5-27 Item Code WLE600V5-27 8AB000ESD Ordering Information Instruction procedure Plug the module into the hosts and update the driver in the system of the hosts. Get the proper driver from the website http://www.compex.com.sg/. Form factor Atheros 9882 Wide size Chipset Card Informations 2x2 11ac 5GHz High Power miniPCIe Radio Compliance Information FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28.37 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. The equipment must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT NOTE: In the event that these conditions cannot be met (for example certain laptop configurations or co-
location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. The antenna gain which being use as below:
Antenna Type Manufacturer Tx Paths Directional Gain Max
(dBi) Frequency Band
(GHz) Panel Antenna 1#
5.1 ~ 5.8 Lanbowan Communications Ltd. Panel Antenna 2#
5.1 ~ 5.8 Kenbotong Communication LTD Panel Antenna 3#
5.1 ~ 5.8 Compex Systems Pte Ltd Panel Antenna 4#
5.1 ~ 5.8 Compex Systems Pte Ltd Panel Antenna 5#
5.1 ~ 5.8 Kenbotong Communication LTD Panel Antenna 6#
5.1 ~ 5.8 Smart Ant Inc Panel Antenna 7#
5.1 ~ 5.8 Compex Systems Pte Ltd Panel Antenna 8#
5.1 ~ 5.8 Compex Systems Pte Ltd Dipole Antenna 1#
5.1 ~ 5.8 Kunshan Wavelink Electronic Co., Ltd. 2 2 2 2 2 2 2 2 2 25 19 17 15 10 7 5 5 2
(1) The modules FCC ID is not visible when installed in the host, or
(2) If the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent
(3) 5.2GHz frequency band support the max antenna gain 25dBi, 5.8GHz frequency band support the max antenna gain 7dBi. OEM integration instructions This device is intended only for OEM integrators under the following conditions The module is only limited to installation in mobile or fixed applications. The antenna must be installed such that 28.37 cm is maintained between the antenna and usersand the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module. As long as 3 conditions above are metfurther transmitter test will not be required. Howeverthe OEM integrator is still responsible for testing their end-product for any additional compliance requirement with this module installed (for exampledigital device emissionPC peripheral requirementsetc.) OEM integration instructions In the event that these conditions cannot be met (for example certain laptop configuration or co-location with another transmitter), then the FCC authorization for this module in combination with the host equipment is no longer considered valid and the FCC ID of the module cannot be used on the final product. In these and circumstancethe OEM integrator will be responsible for re-evaluating. The end product (including the transmitter) and obtaining a separate FCC authorization End product labeling This transmitter module is authorization only for use in device where the antenna may be installed such that 28.37 cm may be maintained between the antenna and users. The final end product must be labeled in a visible area with the following Contains Transmitter Module FCC ID: TK4WLE600V5-27ESD or Contains FCC ID: TK4WLE600V5-27ESD Information that must be placed in the end user manual The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the users manual of the end product which integrates this module. The end user manual shall include all required regulatory information/warning as show in this manual. Compex (Suzhou) Co Ltd No.12 ChuangTou Industrial Square LouFeng North, Suzhou Industrial Park Suzhou, Jiangsu Province China 215122 Tel: +86 512 62950050 Fax: +86 512 62950026