wireless embedded boards Multi-function QCA9558 Embedded Board with on-board Wireless 700MHz CPU / 2x GE Port / 1 x Mini PCI-e / Designed for 3x3 802.11ac Model: WPJ558 KEY FEATURES 128MB System Memory 16MB NOR Flash Qualcomm Atheros QCA9558 MIPS 74Kc 700MHz CPU On-board 2.4GHz max 24dBm output power IEEE 802.11n compliant & backward compatible with 802.11b/g 3x3 On-board radio up to 450Mbps physical data rate 1x Mini PCI Express Slot at 9.2mm Height 2x Gigabit LAN RJ45 with Auto MDI/X Integrated 48V IEEE 802.3af/at Power Over Ethernet Specifications Chipset System Memory NOR Flash Wireless Expansion Interface Reset Button LED Power Over Ethernet DC Power Power Consumption Operating System RoHS Compliance Environmental CPU: Qualcomm Atheros QCA9558 700MHz 128MB DDR2 16MB Built in 2.4GHz 802.11b/g/n at 28dBm (aggregate) 3x U.FL connectors 1x 9.2mm height Mini PCI-e slot 2x Gigabit Ethernet Port (Auto MDI-X) 1x JTAG 14 Pin Connector1 1x Serial Port 4 Pin Connector2 Yes 6x LED Indicators 1x IEEE 802.3af/at or Passive PoE input minimum 36V 1x DC Jack Connector: 24 - 56V 8.6 Watt (Max) CompexWRT or OpenWRT3 Yes Temperature: Operating: -20C to 70C, Storage: -40C to 90C Humidity (non-condensing): Operating: 5% to 95%, Storage: Max. 90%
117 x 105 x 17 mm Surge Suppressor, Watchdog Timer Last Updated: 30/03/2016 Dimensions (W x H x D) Other Features 1.The Serial Port is a 4-pin header (TTL). A Serial Converter is available to change the TTL signals on board to RS-232 signals for debugging. 2.The JTAG Port is a 14-pin header. A JTAG kit is for writing your self-developed loader and firmware directly. 3. For more information on OpenWRT, please refer to the Firmware / Software Section.
*Configurations are subject to change without notifications. wireless embedded boards RF Performance Table Data Rate TX Power
(per chain) TX Power
(3 chains) Tolerance 2.4GHz 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 2.4GHz 802.11n HT40 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 21dBm 21dBm 20dBm 20dBm 21dBm 21dBm 21dBm 20dBm 20dBm 19dBm 19dBm 19dBm 20dBm 19dBm 19dBm 19dBm 18dBm 18dBm 17dBm 17dBm 16dBm 16dBm 15dBm 15dBm 15dBm 14dBm 14dBm 13dBm 25dBm 24dBm 24dBm 24dBm 23dBm 23dBm 22dBm 22dBm 21dBm 21dBm 20dBm 20dBm 20dBm 19dBm 19dBm 18dBm Mechanical Dimensions 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 1dB 2.4GHz 802.11b 2.4GHz 802.11g 2.4GHz 802.11n HT20 2.4GHz 802.11n HT40 Data Rate 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 RX Specifications Sensitivity
-95dBm
-93dBm
-90dBm
-88dBm
-94dBm
-94dBm
-93dBm
-93dBm
-90dBm
-86dBm
-82dBm
-79dBm
-94dBm
-94dBm
-92dBm
-88dBm
-84dBm
-81dBm
-78dBm
-75dBm
-93dBm
-91dBm
-90dBm
-85dBm
-82dBm
-78dBm
-75dBm
-72dBm Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB Caution: The EUT can install PCI module but if the OEM or applicant can't install randomly. They should get the manufacturer authorization and re-certification. 2 Copyright Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HB wireless embedded boards Component and Connector Map CompexWRT Features It is developed based on the OpenWRT platform and features the latest Qualcomm Atheros drivers with LuCI web interface. It combines all of the best in one system. It offers many levels of customization. Powerful Wireless Features Qualcomm Atheros Drivers Native 802.11ac Support Wireless Distribution System (WDS) AP and Client Mode Seamless Mesh Networking Enhanced Control User-friendly LuCI Graphical User Interface Hotspot and Guest Portal Support Powerful Network Diagnostic Utilities Real-time Network Load Graphs Find out more at http://wiki.compex.com.sg/
3 Copyright Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HB wireless embedded boards Firmware / Software The WPJ558 is shipped with the versatile CompexWRT firmware. OpenWRT SDK is provided for further development. SDKs with QCA binary drivers are available for software developers. WPJ558 supported Operating System CompexWRT Operating System OpenWRT Operating System1 WPJ558 supported Mass Management Software Compex AP Controller Software2 1. OpenWRT SDK is available without any technical support by Compex unless otherwise stated. 2. AP Controller only compatbiel with WPJ558 running CompexWRT. Ordering Options Item Code WPJ558 Firmware Processor CompexWRT QCA9558 Power Solutions DC: 24-56V NOR Flash Memory 16MB 128MB Packaging Content Item WPJ558 Embedded Board Read Me First Documentation Quantity 1 1 Packaging Information Packaging Type Dimensions Carton Box (50 units) 875 x 330 x 205 mm Nett Weight 5.2 kg Gross Weight 6.7 kg 6 Copyright Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of Compex Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information is accurate, Compex does not accept liability for any errors or mistakes that may arise. All specifications are subject to change without notice. Compex Systems Pte Ltd | www.compex.com.sg | (+65) 6286 2086 | sales@compex.com.sg | Last Updated: 30/03/2016 WH SY HB Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. RF exposure warning This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter.