1783/2000 14:21 COMPUTIME LTD > +852 2785 to Yrerenmanc:
Remote Siren Siren Speaker Unit 1, Speakers 2. Status LED 3. Battery Compartment 4. Programmable Switch BATTERY INSTALLATION (SEE FIGURES BELOW}
Access the battery compartment on the rear af the unit by removing the back cover. Prass on the upper center part of the cover and slide it down. insert four (4) AA batteries (not included) following the polar-
y diagram. When the last battery is inserted, the Status LED will flash and the Siren will chirp to indicate the batteries are installed properly. Replace the battery compartment cover. The Siren will chirp every 10-15 seconds when the batteries need replacing. Slide down 10 expose battery LY PRECAUTIONS Follow these precautions when using batteries in this device:
1. Use only the size and type of hatterles specified. 2. Be sure to follaw the correct polarity when installing the batteries as indicated in the battery compartment, Reversed batteries may cause damage to the device. 3. Do not mix different type of batteries together (.9. Alkaline and Gasbon-zinc) or old batteries with fresh ones. Ifthe device is not to be used for a long period of time, remove the balfeies to prevent damage or injury from possible battery eakage. Oo not try to recharge batteries not intended to be recharged;
they an gverbeat and rupture. (Follaw battery manufacturer's ions. NGTE: Nat Intended for use in exposed outdoor applications. Will nat aperate properly ifused in below freezing temperatures (32F) or damp INTERMATIC INCORPORATED SPRING GROVE, ILLINOIS 60081-9698
+852 2798 3996 5487 PROGRAMMING THE SIREN SPEAKER I 1. Remove battery compartment cover, 2. Locate the programmable switch. 3. Set the CORRECT SWITCH COMI switch. Ali 3 switches of the program same positions as respective switches grammable switch. 4, Replace batteries, replace the bate INSTALLATION (Siren Speaker Unit) The unit is designed to be either free stangi wall mounted. Place the unit in the desi within 60 from the Alarm Unit. To mo!
or a wall use the supplied screw (see right). WARNING: THE ALARM SIREN IS Vi PLEASE DO NOT ALLOW ITTO SOUND LENGTHS OF TIME, ANSTRUCTIONS a cm batteries. NATION" on programmable, aie switch must be set at the a Main Alarm Unit pro EL SP501B partment cover. 8683-2088 ive COMPLITIME LTE + 252 2745 S152 NO, B36 Dg2 WARNING '
Changes of modifications to this uni{ not expressly appoved by the party responsible or compliance could void the user's authority to operate the equipment, 4 in addition, for @ Class B digital device or peripheral of cordless phone. the user manual shai include the follaving or similar statement, placed in a prominent location in the text of the manual : |
NOTE '
This equipment has been tested and found to comaly with the mits fo a Ciass B cigite! device, pursuact to ode 15 of the FCC Rules. These limits are designed to provide reasonable protecton aganst harmful interference in a resident a! installation. This equipment generates, uses and can radiate rad o frequency enegy ard if not installed and used in accordance with the instructions, may cause harmful interference to radio Communications. i However, there is no guarantee that interference wil net occur na particu'ar instalation. If this equipment dogs cause harmful interference to radio oF television reception, which can be determined by turning the equipment off and or, the User is encouraged to try to corract the interference by one or mare of the following meas.res:
1, Reorient or relocate the receiving antenna. fi 2. Increase the separation between the equipment ard receiver. il 3, Connect the equigment into an outlet on 4 c.rcuit differert rom thal to which the receiver is needed 4. Consutt the dealer or an experienced radio/TV technician for help. f