ZigBee-Ready RF Transceiver Module
(IEEE 802.15.4) CTL3570/1/2/3 The reproduction of this datasheet is NOT allowed without approval of Computime Limited. All information and data contained in this datasheet are subject to change without notice. This publication supersedes and replaces all information previously supplied. Computime has no responsibility to the consequence of using the information described in this document. Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Revision Rev. Date History
(DD-MM-YYYY) 18-09-2011 04-11-2011 First Release Update Pin assignment 1 2 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Table of Contents 1. General Description...................................................................................................................................... 0 2. Applications .................................................................................................................................................. 0 3. Features ....................................................................................................................................................... 0 4. Absolute Maximum Ratings.......................................................................................................................... 1 5. Recommended Operating Conditions .......................................................................................................... 1 6. Electrical Specifications................................................................................................................................ 1 7. Typical application block .............................................................................................................................. 3 8. Pin Assignment............................................................................................................................................. 3 9. Pin Description ............................................................................................................................................. 4 10. Block Diagram......................................................................................................................................... 11 11. RF Frequency Detail............................................................................................................................... 13 12. PCB Layout Recommendations.............................................................................................................. 13 13. Mechanical Dimensions.......................................................................................................................... 14 14. Modules Differentia................................................................................................................................. 15 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 1. General Description The CTL357x RF Transceiver Module is compact surface mounted Module specially designed for Ember ZigBee protocol stack for wireless networks, EmberZNet, based on IEEE 802.15.4 standard in the 2.4GHz world-wide ISM band. The complete module is only 32.4 x 25.4 x 4.1 mm. It integrated a 2.4GHz, IEEE 802.15.4-2003 compliant transceiver with a 32-bit network processor
(ARM Cortex-M3 Processor). It contains embedded Flash and integrated RAM for program and data storage. It utilizes the non-intrusive SIF module for powerful software debugging and programming of the network processor. 2. Applications Home automation &
building control Home appliances &
alarms Monitoring of remote systems Security systems &
lighting controls Sensor data capture in embedded networks 3. Features Integrated IEEE 802.15.4 PHY and MAC layer
Complete ZigBee-ready module with integrated PCB antenna
Non-intrusive debug interface (SIF)
SPI interface for communication and controlled by the Host using the EmberZNet Serial Protocol
(EZSP) Internal RC oscillator for timer
High performance direct sequence spread spectrum (DSSS) RF transceiver
16 channels in the 2.4 GHz ISM band
On-chip regulator for 2.1-3.6V operation , three sleep low power modes
32-bit ARM Cortex-M3 processor
192KB FLASH ROM and 12KB RAM (EM357 internal) ,8Mb off chip Flash memory
(CTL3571&CTL3573)
-98dBm excellent reception sensitivity. (Boost mode -101dBm)
+5dBm transmission power (Boost mode up to +8dBm)
Small footprint: 32.4 x 25.4 x 4.1 mm
Extremely low Deep Sleep Current. Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 4. Absolute Maximum Ratings Parameter Test Conditions Regulator input voltage (VDD_PADS) RF Input Power
(for max level for correct packet reception) SWCLK, Voltage on any GPIO (PA[7:0], PB[7:0], PC[7:0]), nRESET, VREG_OUT Voltage on any GPIO pin (PA4, PA5, PB5, PB6, PB7, PC1), when used as an input to the general purpose ADC with the low voltage range selected Voltage on OSCA, OSCB, NC Storage temperature RX signal into a lossless balun 5. Recommended Operating Conditions Parameter Test Conditions Regulator input voltage (VDD_PADS) Operating temperature range 6. Electrical Specifications T=25, VCC = 3.0V, Fo =2450MHZ, if nothing else stated. Min.
-0.3 Max.
+3.6
+15 Unit V dBm
-0.3
-0.3 VDD_PADS
+0.3 2.0
-0.3 VDD_PADSA
+0.3 V V V
-40
+140 C Min. 2.7 0 Typ. Max. 3.6
+70 Unit V C Parameter Condition / Note Min Typ. Max Unit Operating frequency Number of channels Channel spacing Input/output impedance Frequency stability Programmable in 5MHz steps, 5 MHz steps for IEEE 802.15.4 compliance 2.4 For IEEE 802.15.4 compliance For IEEE 802.15.4 compliance Transmit power Programmable from firmware
-55 Regulator input voltage from 2.1 to 3.6V for module CTL3570 and CTL3572. Operationg temperature range from -40 to 85C for module CTL3570 and CTL3572. 16 5 50 2.5 GHz
+/-40 MHz Ohm ppm 8 dBm Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Condition / Note PER = 1% PER, 20byte packet defined by IEEE 802.15.4 Boost mode IEEE 802.15.4 compliance at -82 dBm IEEE 802.15.4 compliance at -82 dBm Max RX sensitivity (normal mode) Max RX sensitivity (boost mode) Min Typ. Max Unit
-98 35/35 40/40
-6 dBm dB dB dB 2.7 3.6 V 28 30 42 5.0 192 24 mA mA mA A KB MHz Parameter Sensitivity Adjacent channel rejection +/-5 MHz Adjacent channel rejection +/-10 MHz Co-channel rejection Supply voltage Current consumption, RX mode Current consumption, TX mode Deep sleep current Flash Memory MCU clock frequency Supply voltage from 2.1 to 3.6V for module CTL3570 and CTL3572. Deep sleep current less than 8 uA for module CTL3571 and CTL3573. Only CTL3571 and CTL3573 have 8Mb off chip flash memory on the RF module. Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 7. Typical application block HOST MCU Debug and programming interface NREST PTI_EN PTI-DATA SIF_CLK SIF-MISO SIF-MOSI NSIF_LOAD SDBG VDD_PADS=2.7- 3.6V 24MHz 32.768kHz 8Mb flash CTL357x RF Module LINK_ACTIVITY Figure 1: Example of application circuit 8. Pin Assignment Figure 2: CTL357x pin assignment Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 9. Pin Description Pin#
CTL3570 CTL3571 CTL3572 CTL3573 Direction Description 1 2 3 4 5 6 JTCK JTCK JTCK JTCK SWCLK SWCLK SWCLK SWCLK PC2 PC2 PC2 PC2 JTDO JTDO JTDO JTDO SWO SWO SWO SWO PC3 JTDI PC4 PC3 JTDI PC4 PC3 JTDI PC4 PC3 JTDI PC4 JTMS JTMS JTMS JTMS SWDIO SWDIO SWDIO SWDIO I I/O I/O O O I/O I I/O I I/O JTAG debugger clock input from Serial Wire Clock input/output with debugger Digital GPIO_DBGCFG[5]
I/O Enable with JTAG data out to debugger Serial Output asynchronous trace output to Wire Digital GPIO_DBGCFG[5]
I/O Enable with JTAG data in from debugger Digital I/O Either Enable with GPIO_DBGCFG[5]
JTAG mode debugger select from Serial Wire bidirectional data to/from debugger PC0 PC0 PC0 PC0 I/O High current Digital I/O Either Enable with GPIO_DBGCFG[5]
JRST JRST JRST JRST IRQD IRQD IRQD IRQD I I TRACEDATA1 TRACEDATA1 TRACEDATA1 TRACEDATA1 O JTAG reset input from debugger Default external interrupt source D Synchronous CPU trace data bit 1 PB7 PB7 PB7 PB7 I/OHigh current Digital I/O ADC2 ADC2 ADC2 ADC2 Analog ADC input 2 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 IRQC IRQC IRQC IRQC TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 TIM1C2 I O I Default external interrupt source C Timer 1 channel 2 output Timer 1 channel 2 input PB6 PB6 PB6 PB6 I/O High current Digital I/O ADC1 ADC1 ADC1 ADC1 Analog ADC input 1 IRQB IRQB IRQB IRQB TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 TIM1C1 I O I External interrupt source B Timer 1 channel 1 output Timer 1 channel 1 input 7 Pin#
CTL3570 CTL3571 CTL3572 CTL3573 Direction Description PA7 PA7 PA7 PA7 I/O High current Digital I/O Disable REG_EN with GPIO_DBGCFG [4]
TIM1C4 TIM1C4 TIM1C4 TIM1C4 TIM1C4 TIM1C4 TIM1C4 TIM1C4 REG_EN REG_EN REG_EN REG_EN O I O Timer 1 channel 4 output Timer 1 channel 4 input External regulator open drain output PC1 PC1 PC1 PC1 I/O Digital I/O ADC3 ADC3 ADC3 ADC3 Analog ADC input 3 8 9 SWO SWO SWO SWO TRACEDATA0 TRACEDATA0 TRACEDATA0 TRACEDATA0 10 GND GND GND GND O O Serial Output asynchronous trace output to Wire Synchronous CPU trace data bit 0 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 PB3 PB3 PB3 PB3 I/O Digital I/O TIM2C3 TIM2C3 TIM2C3 TIM2C3 O Timer 2 channel 3 output TIM2C3 TIM2C3 TIM2C3 TIM2C3 11 SC1nCTS SC1nCTS SC1nCTS SC1nCTS SC1SCLK SC1SCLK SC1SCLK SC1SCLK SC1SCLK SC1SCLK SC1SCLK SC1SCLK 12 GND GND GND GND I I O I Timer 2 channel 3 input UART CTS handshake of Serial Controller 1 SPI master clock of serial Controller 1 SPI slave clock of serial Controller 1 PC6 PC6 I/O Digital I/O 13 OSC32B OSC32B I/O 32.768KHz crystal oscillator NTX_ACTIVE NTX_ACTIVE PC7 PC7 O Inverted TX_ACTIVE signal I/O Digital I/O 14 OSC32A OSC32A I/O 32.768KHz crystal oscillator OSC32_EXT OSC32_EXT I Digital 32.768KHz clock input source 15 PC5 PC5 PC5 PC5 I/O Digital I/O 16 VDD_PADS VDD_PADS VDD_PADS VDD_PADS Power Pads supply(2.1-3.6V) 17 nRESET nRESET nRESET nRESET I Active low chip reset(internal pull-up) Pin# CTL3570 CTL3571 CTL3572 CTL3573 Direction Description 18 PA0 PA0 PA0 PA0 I/O Digital I/O Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 SC2MOSI SC2MOSI SC2MOSI SC2MOSI SC2MOSI SC2MOSI SC2MOSI SC2MOSI SI SI PA1 PA1 PA1 PA1 TIM2C3 TIM2C3 TIM2C3 TIM2C3 TIM2C3 TIM2C3 TIM2C3 TIM2C3 O I O I I I/O O I Timer 2 channel 1 output Timer 2 channel 1 input SPI master data out of serial controller 2 SPI slave data in of serial controller 2 Serial data in for 8Mb flash Digital I/O Timer 2 channel 3 output Timer 2 channel 3 input 19 SC2SDA SC2SDA SC2SDA SC2SDA I/O TWI data of serial controller 2 SC2MISO SC2MISO SC2MISO SC2MISO SC2MISO SC2MISO SC2MISO SC2MISO SO SO 20 PA2 PA2 PA2 PA2 TIM2C4 TIM2C4 TIM2C4 TIM2C4 TIM2C4 TIM2C4 TIM2C4 TIM2C4 O I O I/O O I SPI slave data out of serial controller 2 SPI master data in of serial controller 2 Serial data out of 8Mb flash Digital I/O Timer 2 channel 4 output Timer 2 channel 4 input SC2SCL SC2SCL SC2SCL SC2SCL I/O TWI clock of serial controller 2 SC2SCLK SC2SCLK SC2SCLK SC2SCLK O SPI master clock of serial controller 2 The SI,SO,SCK and CE# on the module pin18,19,20 and 23 are connected to the off chip 8Mbit SPI Serial Flash(SST25VF080B).Details information about the flash memory ,refers to its datasheet. It applys to the module CTL3571 and CTL3573. Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 SC2SCLK SC2SCLK SC2SCLK SC2SCLK SCK SCK I I SPI slave clock of serial controller 2 Clock in for 8Mb flash PA6 PA6 PA6 PA6 I/O High current Digital I/O 21 TIM1C3 TIM1C3 TIM1C3 TIM1C3 TIM1C3 TIM1C3 TIM1C3 TIM1C3 PB4 PB4 PB4 PB4 TIM2C4 TIM2C4 TIM2C4 TIM2C4 22 TIM2C4 TIM2C4 TIM2C4 TIM2C4 SC1nRTS SC1nRTS SC1nRTS SC1nRTS SC1nSSEL SC1nSSEL SC1nSSEL SC1nSSEL O I I/O O i O I Timer 1 channel 3 output Timer 1 channel 3 input Digital I/O Timer 2 channel 4 output Timer 2 channel 4 input UART RTS handshake of serial controller 1 SPI slave select of serial controller 1 Pin#
CTL3570 CTL3571 CTL3572 CTL3573 Direction Description PA3 PA3 PA3 PA3 I/O Digital I/O SC2Nssel SC2Nssel SC2Nssel SC2Nssel TRACECLK TRACECLK TRACECLK TRACECLK 23 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 24 PA4 CE#
PA4 PA4 CE#
PA4 I O O I I SPI slave select of serial controller 2 Synchronous CPU clock trace Timer 2 channel 2 output Timer 2 channel 2 input Chip Enable of 8Mb falsh I/O Digital I/O Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 ADC4 ADC4 ADC4 ADC4 Analog ADC input 4 PTI_EN PTI_EN PTI_EN PTI_EN TRACEDATA2 TRACEDATA2 TRACEDATA2 TRACEDATA2 PA5 PA5 PA5 PA5 O O I/O Frame signal of packet trace interface Synchronous CPU trace data bit 2 Digital I/O ADC5 ADC5 ADC5 ADC5 Analog ADC input 5 25 PTI_DATA PTI_DATA PTI_DATA PTI_DATA NBOOTMODE NBOOTMODE NBOOTMODE NBOOTMODE TRACEDATA3 TRACEDATA3 TRACEDATA3 TRACEDATA3 PB1 PB1 PB1 PB1 SC1MISO SC1MISO SC1MISO SC1MISO SC1MOSI SC1MOSI SC1MOSI SC1MOSI O I O I/O O O Data signal of packet trace interface Embedded serial bootloader activation out of reset Synchronous CPU trace data bit 3 Digital I/O SPI slave data out of serial controller 1 SPI master data out of serial controller 1 26 SC1SDA SC1SDA SC1SDA SC1SDA I/O TWI data of serial controller 1 SC1TXD SC1TXD SC1TXD SC1TXD TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 TIM2C1 O O I UART transmit data of serial controller 1 Timer 2 channel 1 output Timer 2 channel 1 input Pin# CTL3570 CTL3571 CTL3572 CTL3573 Direction Description 27 PB2 PB2 PB2 PB2 I/O Digital I/O Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 SC1MISO SC1MISO SC1MISO SC1MISO SC1MOSI SC1MOSI SC1MOSI SC1MOSI I I SPI master data in of serial controller 1 SPI slave data in of serial controller 1 SC1SCL SC1SCL SC1SCL SC1SCL I/O TWI clock of serial controller 1 SC1RXD SC1RXD SC1RXD SC1RXD TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 TIM2C2 I O I UART receive data of serial controller 1 Timer 2 channel 2 output Timer 2 channel 2 input PB5 PB5 PB5 PB5 I/O Digital I/O ADC0 ADC0 ADC0 ADC0 Analog ADC input 0 28 TIM2CLK TIM2CLK TIM2CLK TIM2CLK TIM1CLK TIM1CLK TIM1CLK TIM1CLK I I Timer 2 external clock input Timer 1 external clock mask input PB0 PB0 PB0 PB0 I/O Digital I/O VREF VREF VREF VREF Analog O ADC reference output VREF VREF VREF VREF Analog I ADC reference input 29 IRQA IRQA IRQA IRQA TRACECLK TRACECLK TRACECLK TRACECLK TIM1CLK TIM1CLK TIM1CLK TIM1CLK TIM2MSK TIM2MSK TIM2MSK TIM2MSK I O I I External interrupt source A Synchronous CPU trace clock Timer 1 external clock input Timer 2 external clock mask input Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 10. Block Diagram 2.1 3.6V TO HOST MCU TO HOST MCU 24MHz IEEE 802.15.4 RF Transceiver 32 Bit ARM Processor User Application ZigbeeTM Network IEEE 802.15.4 MAC CTL3570 2.7 3.6V Integrated antenna 32 Bit ARM Processor User Application ZigbeeTM Network IEEE 802.15.4 MAC 24MHz 8Mb flash IEEE 802.15.4 RF Transceiver Integrated antenna CTL3571 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 2.1 3.6V TO HOST MCU 32 Bit ARM Processor User Application ZigbeeTM Network IEEE 802.15.4 MAC 32.768kHz 24MHz IEEE 802.15.4 RF Transceiver Integrated antenna CTL3572 2.7 3.6V TO HOST MCU 32 Bit ARM Processor User Application ZigbeeTM Network IEEE 802.15.4 MAC 32.768kHz 8Mb flash 24MHz IEEE 802.15.4 RF Transceiver Integrated antenna CTL3573 Figure 3: Block Diagram Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 11. RF Frequency Detail The following table shows the RF channels as defined by the IEEE 802.15.4 standard. RF channel 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Frequency 2405MHz 2410MHz 2415MHz 2420MHz 2425MHz 2430MHz 2435MHz 2440MHz 2445MHz 2450MHz 2455MHz 2460MHz 2465MHz 2470MHz 2475MHz 2480MHz 12. PCB Layout Recommendations Please reference Mechanical Dimensions shown in next section for PCB layout. The area underneath the module should be covered with solder mask in order to prevent short circuit on the test pads on the back side of the module. A solid ground plane under the module is preferred. As the module integrated with onboard PCB trace antenna, the mounting position of the module will have great impact on the RF performance. There should not be any trace, ground plane or metal part underneath or nearby the area of the onboard PCB trace antenna. The figure below shows an example how the module positioned on the mother PCB. Figure 4: A recommended placement of the module on a main PCB Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 13. Mechanical Dimensions Figure 5: Mechanical Dimensions of CTL357x
.8 Recommended PCB footprint Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 14. Modules Differentia Computime Model No. 32kHz Crystal 8Mbit Flash Memory CTL3570 CTL3571 CTL3572 CTL3573 N N Y Y N Y N Y FCC STATEMENT Part 15.19 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. Part 15.21 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Part 15.105 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Part 2.1091 For purposes of this section, a mobile device is defined as a transmitting device designed to be used in other than fixed locations and to generally be used in such a way that a separation distance of at least 20 centimeters is normally maintained between the transmitter's radiating structure(s) and the body of the user or nearby persons. In this context, the term fixed location means that the device is physically secured at one location and is not able to be easily moved to another location. Transmitting devices designed to be used by consumers or workers that can be easily re-located, such as wireless devices associated with a personal computer, are considered to be mobile devices if they meet the 20 centimeter separation requirement. If the FCC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: DI2-CTL3573 Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Canada information:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. If the IC identification number is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module IC: 1700D-CTL3573 IC RF warning statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator &
your body. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Copyright 2011 Computime Limited. All rights reserved. Rev. 3 ZigBee- Ready RF Transceiver Module CTL3570/1/2/3 Contact information COMPUTIME CORPORATE HQ 17/F, Great Eagle Centre, 23 Harbour Road, Wanchai, Tel: +852.2260.0300 Fax: +852.2790.3996 e-mail: hq@computime.com COMPUTIME NORTH AMERICA HQ, 4700 Duke Dr. Suite 200 Mason OH 45040 USA Tel: +1(513).398.2579 Fax: +1(513).754.8955 e-mail: na@computime.com CINCINNATI WIRELESS SOLUTIONS LTD 4700 Duke Dr. Suite 200 Mason OH 45040 USA Tel: +1(513).754.8935 Fax: +1(513).754.8955 e-mail: ctws@computime.com COMPUTIME JAPAN 3-18-9 Roppongi Minatoku, Tokyo 106-0032, Japan Tel: (03).3583.8411 Fax: (03).3583.3799 e-mail: cj@computime.com About Computime Founded in 1974, Computime is a global technology, brand and manufacturing company providing innovative automation and control solutions to customers in commercial, industrial and consumer markets. The Company provides technologies and products that save energy and make people's lives more productive and comfortable. Copyright 2011 Computime Limited. All rights reserved. Rev. 3