U S E R S G U I D E U S E R S G U I D E S G U I D E U S E R U S E R S G U I D E 1 OPERATION. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures :
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.
- Consult the dealer of an experienced radio/TV technician for help. NOTE : The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. 2 3 How to install .. 2 How to control the menu on screen . 4 Pivot (*option) .. 8 Power Supply and Power Management System . 9 A Trouble Shooting .. 10 Specifications . 10 Mode Supported .. 12 Analog PC Graphics Port Signal Descriptions .. 13 Base Assy Alteration and Installation 14 4 vivid screen and crisp color. It is easy to control the resolution from SXGA(1280*1024), XGA(1024*768), SVGA(800*600) to VGA (640*480). It detects and configures automatically the optimal characteristics of input frequency. While receiving the output RGB video signal from computer, the monitor can display it up to 16 million colors. The user can set screen automatically by one-touch pressing. (AUTO key) The user can adjust the angle(90) of the TFT LCD monitor according to customers convenience. It must install Pivot software to make 4:3 frame to 3:4 frame. It provides a power saving function (DPMS). It provides Plug-and-Play so you may install this monitor easily. The emission of electromagnetic waves that can be harmful to the human body has been minimized. 5 Do not open the inside of the monitor. If needed, contact with A/S center. 2. If the following problem occurs, disconnect the plug and contact our service center. When some or whole part of monitor is exposed to excessive humidity or moisture. In case there is a strange sound, smell, or smoke inside the monitor. If the power cable is damaged, be extremely careful when disconnecting the plug. How to install 1. Attention Point to install Do not use this product on an unstable place.
- This product may fall, causing serious damage to the product. In the well-ventilated place, it is a good place where it is installed. Do not put the monitor in a damp place and close to a heating installation.
- It may be cause of electric shock and breakdown. Do not put the metal or heavy goods on this product.
- It may be cause of electric shock, a fire and breakdown. Do only install the power cord and adapter in the enclosed box. 6 Driver Diskette Pivot Install CD(*option) Speaker Cable If any of the above items are damaged or missing, please contact your customer service center as soon as possible. 3. Installing the monitor 3.1 Connecting the LCD monitor with computer 1. Turn off the computer before connecting the monitor 2. Connect the signal cable from PC signal port to Monitor signal port. 3. Connect the audio cable from PC audio port to Monitor audio port. 4. Plug in the AC/DC adapter, and connect the DC connector to the DC Port on the back of the monitor. 5. Turn on the computer, then Plug-and-Play will run automatically. At this time, you should install the driver in driver diskette. 7 How to control the menu on screen
<Picture 1>
AUTO LEFT POWER LED POWER SWITCH UP RIGHT MENU DOWN SELECT
<Picture 2>
1. Names of front side, and their use AUTO Key (AUTO) : Operates AUTO Adjust without opening OSD menu. Menu Key (MENU) : Opens the OSD display and closes OSD menu display. 8 value of the selected item in submenu.
/ opens Volume menu without opening OSD menu. Select Key (SELECT) : Select Icons or functions in OSD menu and submenu. Power Key (POWER) : Turns the monitor on / off. Power LED : Green(normal operation). Yellow (DPMS mode). No MENU on display OSD Main MENU Sub-MENU AUTO MENU Operates auto -
configuration Directly Opens OSD Main menu Closes OSD main
menu UP Opens Brightness menu DOWN Opens Contrast menu RIGHT Opens Volume menu LEFT Opens Volume menu
<Picture 3>
Moves icon to the Right in OSD Menu Moves icon to the Left in OSD Menu SELECT
Selects item
Returns to OSD main menu
Increases the value of the selected item Decreases the value of the selected item Selects value and return to OSD main Menu 9
<Picture 3>
<Picture 4>
2. How to Control OSD menu The OSD menu appears when the user presses the OSD calling button(MENU). The user can select the function and configure the selected function that best fits the computer environment. If no item is selected after the OSD menu is brought up, it automatically disappears after 15 seconds. Moreover, the user can operate directly Brightness Menu, Contrast Menu and Volume Menu without calling OSD Menu. ITEM Brightness Contrast H-Position V-Position Contents Adjusts brightness Adjusts contrast Adjusts horizontal screen position Adjusts vertical RIGHT Gets brighter more vivid right Screen color becomes Screen color becomes Moves screen to the Moves screen to the Moves screen to Moves screen to LEFT Gets darker duller left 10 H-Position OSD V-Position Reset Auto Adjust position of OSD Adjusts vertical position of OSD Recovers the default value Sets to auto -
adjustment g Moves OSD to upward RIGHT : Recovers the default value RIGHT : Sets to Auto adjustment Moves OSD to Downward LEFT : No change LEFT : No change The OSD is in English only. When the cable is disconnected, the monitor will change into DPMS mode. Then a Power Saving Mode message will appear. If you entered a mode that does not support the monitor, the message Input Not Supported will appear. Ref.) For the best display quality, select Auto Adjust in closing windows screen. It automatically adjusts vertical, horizontal position and screen noise as optimum. This Auto Adjust does not support motion pictures and works only when the image fully appears on the screen. 3. Reset Function The user can use the Reset function on OSD to adjust to the default value. At this time, color information (Brightness,R,G,B,Contrast) are changed to factory default value and Auto Config operates automatically after Reset for optimum quality. 11 Phase
(*1) OSD V-Position 50
(*1) : If you operate auto adjust, only these items will be set automatically.
( Color information will not be affected by auto adjust.) Pivot (*option) 12
< Landscape >
< Portrait >
<Picture 5>
If you purchase pivot-enable model, you can set your monitor to portrait mode mechanically. You can rotate the screen to 90 for your convenience with simple procedure. To rotate monitor, pull the front panel (up to 15 ) and turn to clock-wise direction. When you are working with word processor, image editor, web browser for web surfing , or etc, this pivot-enable can make your job more effective. Power Supply and Power Management System 13 Current
: 5.0A 2. Power Management System For the power management system of this monitor, DPMS(Display Power Management Signaling) of VESA(Video Electronic Standard Association) is included in the system. This reduces power consumption when the monitor is not being used. The color or LED lamp varies according to power consumption mode. State Normal Use Save mode LED Color Green light Yellow light Power consumption(AC) Around 44W Around 4W Ref.) To use the power saving function, follow the steps described below: Start >
Settings > Control Panel > Display > Screen Saver > Energy Saving Features
> Select shut off monitor > and adjust the time. 14
! The screen is out of focus or noise occurs.
! Change screen resolution
! Setup DPMS mode
! Check if the power supply is connected.
! Adjust the OSD menu that fits the computer.
(Use Reset, Auto, Phase keys and so on)
! Check the compatibility between computer
! Window 98(95): Select control panel and the monitor. display Setting.
! Window 98(95): Select Window Saver or BIOS-SETUP of computer.
(Refer to Service manual) Specifications SPEC Panel Type Panel Size Resolution Display Size Dot Pitch Color Contrast Brightness Compatibility Input Signal Connection Cable Plug-and-Play Power Management System Description TFT 17.0 1280 * 1024 337.92(W) * 270.33(H) mm 0.264mm * 0.264mm 16.7M colors (24bit color mode) TYP : 350 : 1 CR TYP : 200 cd/m IBM, MAC Analog R.G.B (0.7VP-P) D-sub 15 PIN VESA DDC 1,2B VESA DPMS (Display Power Management Signaling) 15 Users Adjustment Card Brightness, Contrast, H/V Position, OSD H/V Position, Color RGB, Auto Config, Reset, Clock, Phase,
<Picture 6>
16 800 600@60Hz 800*600@72Hz 800*600@75Hz 1024*768@60Hz 1024*768@70Hz 1024*768@75Hz 1280*1024@60Hz 1280*1024@70Hz 1280*1024@72Hz 1280*1024@75Hz XGA SXG A EGA 640*350@70Hz CGA 640*400@70Hz EGA 720*350@70Hz DOS 720*400@70Hz XGA 1024*768@72Hz VGA 640*480@67Hz SVGA 832*624@75Hz 1024*768@60Hz XGA 1024*768@75Hz 37.879 48.077 46.875 48.363 56.476 60.023 63.981 74.620 76.752 79.976 31.469 31.469 31.469 31.469 57.515 35.000 49.728 48.780 60.241 60.317 72.188 75.000 60.004 70.069 75.029 60.020 70.000 72.000 75.025 70.086 70.086 70.086 70.806 72.1 66.667 74.551 60.001 74.927 IBM MAC 17 Ground Ground Ground Ground Ground
DDC SDA Horizontal Sync Vertical Sync DDC SCL GND GND-R GND-G GND-B GND
SDA Hsync Vsync SCL 5 6 7 8 9 10 11 12 13 14 15 18
( Monitor back-side ) 1. Turn off the monitor power and disconnect power cable from the outlet. 2. Put a safe cloth on a flat floor and place the monitor on it. 3. Disconnect screws and pull the base Assy. 19 20