all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
User Manual | Users Manual | 2.18 MiB | June 10 2019 | |||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 |
|
Ext Photos | External Photos | 1.97 MiB | ||||
1 2 3 4 | ID Label/Location Info | |||||||
1 2 3 4 | Cover Letter(s) | |||||||
1 2 3 4 | Test Setup Photos | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Test Report | |||||||
1 2 3 4 | Attestation Statements | June 10 2019 | ||||||
1 2 3 4 | Cover Letter(s) | June 10 2019 | ||||||
1 2 3 4 |
|
Int Photos | Internal Photos | 698.63 KiB | June 10 2019 | |||
1 2 3 4 | RF Exposure Info | June 10 2019 | ||||||
1 2 3 4 | Test Setup Photos | June 10 2019 | ||||||
1 2 3 4 | Test Report | June 10 2019 | ||||||
1 2 3 4 | Test Report | June 10 2019 |
1 2 3 4 | User Manual | Users Manual | 2.18 MiB | June 10 2019 |
VR-3053 Home Gateway User Manual 261099-049 Version A1.0, June 14, 2019 Preface This manual provides information related to the installation and operation of this device. The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. If you find the product to be inoperable or malfunctioning, please contact technical support for immediate service by email at INT-support@comtrend.com For product update, new product release, manual revision, or software upgrades, please visit our website at http://www.comtrend.com Important Safety Instructions With reference to unpacking, installation, use, and maintenance of your electronic device, the following basic guidelines are recommended:
Do not use or install this product near water, to avoid fire or shock hazard. For example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement). Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its path and no heavy items should be placed on the cord. In addition, do not walk on, step on, or mistreat the cord. Use only the power cord and adapter that are shipped with this device. To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are not blocked. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightening. Also, do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during stormy weather conditions. CAUTION:
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Do not stack equipment or place equipment in tight spaces, in drawers, or on carpets. Be sure that your equipment is surrounded by at least 2 inches of air space. If this Home Gateway Router cause harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone company will notify the customer as soon as possible. Also you will be advised of your right to file a complaint with the FCC if you believe it is necessary. 1 To prevent interference with cordless phones, ensure that gateway is at least 5 feet ( 1.5m )from the cordless phone base station. If you experience trouble with this equipment, you disconnect it from the network until the problem has been corrected or until you are sure that equipment is not malfunctioning. If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable alarm equipment consult your telephone company or a qualified installer. WARNING( ATTENTION ) Disconnect the power line from the device before servicing. For indoor use only Do NOT open the casing Do NOT use near water Do NOT insert sharp objects into the RJ-11 jack Keep away from the fire For use in ventilated environment / space Use 26 AWG or larger cable connect to RJ-11 port Dbranchez l'alimentation lectrique avant l'entretien Cet appareil est conu pour l'usage intrieur seulement N'ouvrez pas le botier N'utilisez pas cet appareil prs de l'eau N'insrez pas d'objets tranchants dans la prise RJ-11N'approchez pas du feu Veuillez utiliser dans un environnement ar Veuillez utiliser fil lectrique de 26AWG pour port RJ-11 Power Specifications( Alimentation ) :
Input 12Vdc, 2A FCC & ISED User Information Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Aucune modification apporte lappareil par lutilisateur, quelle quen soit la nature. Tout changement ou modification peuvent annuler le droit dutilisation de lappareil par lutilisateur. 2 Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B est conforme la norme NMB-003 Canada. Pour rduire le risque dinterfrence aux autres utilisateurs, le type dantenne et son gain doivent tre choisies de faon que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour une communication russie. Cet appareil est conforme la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne peut pas provoquer dinterfrences et 2. Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif. Radiation Exposure FCC 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ISED This device complies with the ISED radiation exposure limit set forth for an 3 uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. Cet metteur ne doit pas tre co-localises ou oprant en conjonction avec une autre antenne ou transmetteur. The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five. 4 Copyright Copyright2019 Comtrend Corporation. All rights reserved. The information contained herein is proprietary to Comtrend Corporation. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Comtrend Corporation. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/
NOTE:
This document is subject to change without notice. Protect Our Environment This symbol indicates that when the equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separate from domestic waste. The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law. Instead, please be responsible and ask for disposal instructions from your local government. Save Our Environment When this equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separately from domestic waste. The cardboard box, the plastic in the packaging, and the parts that make up this device can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste. You may be subject to penalties or sanctions under the law. Instead, ask for disposal instructions from your municipal government. Please be responsible and protect our environment. 5 Table of Contents CHAPTER 1 INTRODUCTION ........................................................................................................... 8 CHAPTER 2 INSTALLATION ............................................................................................................. 9 2.1 HARDWARE SETUP ........................................................................................................................... 9 2.1.1 Back Panel ............................................................................................................................. 10 2.1.2 Bottom Panel ......................................................................................................................... 12 2.1.3 Front Panel ............................................................................................................................ 13 CHAPTER 3 WEB USER INTERFACE ............................................................................................ 15 3.1 DEFAULT SETTINGS ....................................................................................................................... 15 3.2 IP CONFIGURATION ........................................................................................................................ 16 3.3 LOGIN PROCEDURE ........................................................................................................................ 18 CHAPTER 4 BASIC SETUP ............................................................................................................... 20 4.1 INTERNET ...................................................................................................................................... 21 4.2 WIFI 2.4GHZ ................................................................................................................................. 23 4.3 WIFI 5GHZ .................................................................................................................................... 24 4.4 LAN .............................................................................................................................................. 25 4.4.1 Configuration ........................................................................................................................ 25 4.4.2 Devices Connected ................................................................................................................ 26 4.5 FIREWALL ...................................................................................................................................... 27 4.5.1 Main Firewall ........................................................................................................................ 27 4.5.2 Parental Control .................................................................................................................... 28 CHAPTER 5 ADVANCED SETUP ..................................................................................................... 30 5.1 DSL ............................................................................................................................................... 31 5.1.1 Mode Setting .......................................................................................................................... 31 5.1.2 Status ..................................................................................................................................... 32 5.1.3 ATM Channel ......................................................................................................................... 33 5.2 MULTIPLE BRIDGE ......................................................................................................................... 34 5.2.1 LAN VLAN ............................................................................................................................. 34 5.2.2 Bridges ................................................................................................................................... 34 5.3 MULTICAST ................................................................................................................................... 35 5.4 SYSTEM ......................................................................................................................................... 36 5.4.1 Administration ....................................................................................................................... 36 5.4.2 User Management.................................................................................................................. 37 5.4.3 System Time ........................................................................................................................... 38 5.4.4 System Log ............................................................................................................................. 39 5.4.5 Diagnostics ............................................................................................................................ 40 5.5 DYNAMIC DNS .............................................................................................................................. 42 5.6 WIFI 2.4GHZ ................................................................................................................................. 45 5.6.1 Advanced ............................................................................................................................... 45 5.6.2 SSIDs ..................................................................................................................................... 47 5.6.3 WPS ....................................................................................................................................... 49 5.6.4 MAC Filtering ....................................................................................................................... 51 5.6.5 WDS ....................................................................................................................................... 52 5.6.6 Statistics ................................................................................................................................. 53 5.6.7 Airtime Fairness .................................................................................................................... 55 5.7 WIFI 5GHZ .................................................................................................................................... 58 5.7.1 Advanced ............................................................................................................................... 58 5.7.2 SSIDs ..................................................................................................................................... 60 5.7.3 WPS ....................................................................................................................................... 62 5.7.4 MAC Flitering ....................................................................................................................... 64 5.7.5 WDS ....................................................................................................................................... 66 5.7.6 Statistics ................................................................................................................................. 67 5.7.7 Airtime Fairness .................................................................................................................... 69 5.8 UPNP ............................................................................................................................................ 72 5.9 QUALITY OF SERVICE .................................................................................................................... 73 6 5.9.1 QoS ........................................................................................................................................ 74 5.9.2 QoS Graphs ........................................................................................................................... 77 5.9.3 Queue Stats ............................................................................................................................ 78 5.10 ADVANCED FIREWALL ................................................................................................................. 79 5.10.1Packet Filter ........................................................................................................................ 79 5.10.2URL Filter............................................................................................................................ 81 5.11OAM DIAGNOSTICS .................................................................................................................... 82 5.11.1 ATM OAM F5 Loopback ...................................................................................................... 82 5.12NAT ............................................................................................................................................ 83 5.12.1 DMZ ..................................................................................................................................... 83 5.12.2 Port Mapping ....................................................................................................................... 84 5.12.3 Port Triggering .................................................................................................................... 86 5.13 DEVICE MANAGEMENT ............................................................................................................... 88 5.14 ROUTING ..................................................................................................................................... 90 5.14.1 Static Routing ...................................................................................................................... 90 5.14.2 RIP ....................................................................................................................................... 94 CHAPTER 6 LOGOUT ....................................................................................................................... 95 APPENDIX A SPECIFICATIONS .................................................................................................. 96 APPENDIX B - SSH CLIENT ............................................................................................................. 98 7 Chapter 1 Introduction VR-3053 is a Multi-DSL router using the Intel solution. It not only provides both ADSL and 35b VDSL but also integrated 5 Giga Ethernet ports and WLAN 802.11n 2.4GHz frequency band and 802.11ac 5GHz Frequency band. Therefore, VR-3053 is designed for high speed applications. VR-3053 also follows TR-069 making central management (ACS) very easy. 8 Chapter 2 Installation 2.1 Hardware Setup Non-stackable This device is not stackable do not place units on top of each other, otherwise damage could occur. Follow the instructions below to complete the hardware setup. 9 2.1.1 Back Panel The figure below shows the back panel of the device. WiFi On/Off Press and release the WiFi button to enable the WiFi function. To disable WiFi, press and release the WiFi button. WPS Button Press the WPS button less than 2 seconds to enable WPS which will allow 2 minutes for WiFi connection. ETH WAN PORT This port is designated to be used for Ethernet WAN functionality only. Use 1000-BASE-T RJ-45 cables to connect to Gigabit WAN server, or 10/100BASE-T RJ-45 cables for standard network usage. This ports is auto-sensing MDI/X; so either straight-through or crossover cable can be used. LAN (Ethernet) Ports You can connect the router to up to four LAN devices using RJ45 cables. The ports are auto-sensing MDI/X and either straight-through or crossover cable can be used. 10 DSL Connect to the DSL port with the DSL RJ11 cable. Power ON Press the power button to the OFF position (OUT). Connect the power adapter to the power port. Attach the power adapter to a wall outlet or other AC source. Press the power button to the ON position (IN). If the Power LED displays as expected then the device is ready for setup (see section LED Indicators). Caution 1: If the device fails to power up, or it malfunctions, first verify that the power cords are connected securely and then power it on again. If the problem persists, contact technical support. Caution 2: Before servicing or disassembling this equipment, disconnect all power cords and telephone lines from their outlets. 11 2.1.2 Bottom Panel Reset Button Restore the default parameters of the device by pressing the Reset button for 10 seconds. After the device has rebooted successfully, the front panel should display as expected (see section 2.1.3 Front Panel for details). NOTE: If pressed down for more than 60 seconds, the VR-3053 will go into a firmware update state (CFE boot mode). The firmware can then be updated using an Internet browser pointed to the default IP address. 12 2.1.3 Front Panel The front panel LED indicators are shown below and explained in the following table. This information can be used to check the status of the device and its connections. LED Color Mode Function Green INTERNET On IP connected and no traffic detected. If an IP or PPPoE session is dropped due to an idle timeout, the light will remain blue. The light will turn red when it attempts to reconnect and DHCP or PPPoE fails. Off Modem power off, modem in bridged mode or WAN connection not present. IP connected and IP Traffic is passing through the device (either direction) Device attempted to become IP connected and failed (no DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, etc.) xDSL Link is established. On Off Blink xDSL Link is training or data transmitting. xDSL Link is not established. Blink Red On DSL Green 13 ETH WAN Green 5G WiFi Green 2.4G WiFi Green WPS Green ETH 1X-4X Green Green Ethernet WAN is connected. Ethernet WAN is not connected. On Off Blink Ethernet WAN is transmitting/ receiving. On Wi-Fi enabled. Off Wi-Fi disabled. Blink Data transmitting or receiving over WLAN. On Wi-Fi enabled. Off Wi-Fi disabled. Blink Data transmitting or receiving over WLAN. On WPS connection successful. The LED will stay on Off Slow Blink Fast Blink On Off Blink Data transmitting or receiving over Ethernet. On Off WPS connection unsuccessful. The LED will keep blinking for 30 seconds. An Ethernet Link is established. An Ethernet Link is not established. for 3 minutes. No WPS association process ongoing. WPS connection in progress. The device is powered up. The device is powered down. POST (Power On Self Test) failure or other malfunction. A malfunction is any error of internal sequence or state that will prevent the device from connecting to the DSLAM or passing customer data. POWER Red On Note:
A malfunction is any error of internal sequence or state that will prevent the device from connecting to the DSLAM or passing customer data. This may be identified at various times such after power on or during operation through the use of self testing or in operations which result in a unit state that is not expected or should not occur. IP connected (the device has a WAN IP address from IPCP or DHCP and DSL is up or a static IP address is configured, PPP negotiation has successfully complete if used and DSL is up ) and no traffic detected. If the IP or PPPoE session is dropped for any other reason, the light is turned off. The light will turn red when it attempts to reconnect and DHCP or PPPoE fails. 14 Chapter 3 Web User Interface This section describes how to access the device via the web user interface (WUI) using an Internet browser such as Internet Explorer (version 5.0 and later). 3.1 Default Settings The factory default settings of this device are summarized below. LAN IP address: 192.168.1.1 LAN subnet mask: 255.255.255.0 Administrative access (username: root, password: 12345) User access (username: user, password: user) Remote (WAN) access (username: support, password: support) WLAN access: enabled Technical Note During power on, the device initializes all settings to default values. It will then read the configuration profile from the permanent storage section of flash memory. The default attributes are overwritten when identical attributes with different values are configured. The configuration profile in permanent storage can be created via the web user interface or telnet user interface, or other management protocols. The factory default configuration can be restored either by pushing the reset button for more than ten seconds until the power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore Settings screen. 15 3.2 IP Configuration DHCP MODE When the VR-3053 powers up, the onboard DHCP server will switch on. Basically, the DHCP server issues and reserves IP addresses for LAN devices, such as your PC. To obtain an IP address from the DCHP server, follow the steps provided below. NOTE:
The following procedure assumes you are running Windows. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Select Obtain an IP address automatically as shown below. STEP 4: Click OK to submit these settings. If you experience difficulty with DHCP mode, you can try static IP mode instead. 16 STATIC IP MODE In static IP mode, you assign IP settings to your PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE:
The following procedure assumes you are running Windows. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Change the IP address to the 192.168.1.x (1<x<255) subnet with subnet mask of 255.255.255.0. The screen should now display as shown below. STEP 4: Click OK to submit these settings. 17 3.3 Login Procedure Perform the following steps to login to the web user interface. NOTE:
STEP 1: Start the Internet browser and enter the default IP address for the device The default settings can be found in 3.1 Default Settings. in the Web address field. For example, if the default IP address is 192.168.1.1, type http://192.168.1.1. NOTE:
For local administration (i.e. LAN access), the PC running the browser must be attached to the Ethernet, and not necessarily to the device. STEP 2: A dialog box will appear, such as the one below. Enter the default username and password, as defined in section 3.1 Default Settings. Click OK to continue. 18 STEP 3: After successfully logging in for the first time, you will reach this screen. You can also reach this page by clicking on the following icon located at the top of the screen. 19 Chapter 4 Basic Setup You can reach this page by clicking on the following icon located at the top of the screen. The web user interface window is divided into two frames, the main menu (at left) and the display screen (on the right). The main menu has several options and selecting each of these options opens a submenu with more selections. NOTE: The menu items shown are based upon the configured connection(s) and user account privileges. For example, if NAT and Firewall are enabled, the main menu will display the NAT and Security submenus. If either is disabled, their corresponding menu(s) will also be disabled. This screen shows hardware, software, IP settings and other related information. 20 4.1 Internet Click on the internet tab to display the following. For a tour of the page, please click the question mark icon right-hand side of this screen. on the upper To add aconnection, click the button to display the following. on the upper right-hand side of this screen for Click the Information icon information on Internet Connections. 21 IPv6 for your reference. 22 4.2 WiFi 2.4GHz Configure the main wireless LAN interface that operates in the 2.4GHz range. It offers greater coverage and supports legacy devices. Click the Information icon information on 2.4GHZ WiFi Settings. on the upper right-hand side of this screen for 23 4.3 WiFi 5GHz Configure the main wireless LAN interface that operates in the 5GHz range. It offers less interference and is ideal for media streaming and gaming. Click the Information icon information on 5GHZ WiFi Settings. on the upper right-hand side of this screen for 24 4.4 LAN 4.4.1 Configuration Configuration support to provide IP address to devices connected on the LAN side of the CPE. Applicable for all wired and wireless devices that requests a dynamic IP address. Click the Information icon information on Local Network Settings. on the upper right-hand side of this screen for 25 4.4.2 Devices Connected This displays the List of Clients Connected on the LAN Side of the CPE. MAC Address MAC address of the device that is connected to the LAN port. Host Name Host Name of the device that is connected to the LAN port. IP Address IP Address of the device that is connected to the LAN port. Click the button to refresh the screen. 26 4.5 Firewall 4.5.1 Main Firewall The CPE device provides extensive firewall protection against a wide array of common hacker attacks. This is done by restricting connection parameters to limit the risk of intrusion. Application layer protocol services can be enabled/disabled from this page. Click the Information icon information on Main Firewall Settings. on the upper right-hand side of this screen for 27 4.5.2 Parental Control Access to the internet from LAN Host PCs can be controlled based on MAC addresses and Time of Day. Select the default action Permit or Deny and click the button. Click the button to display the following. 28 Click the Information icon information on Parental Control Rules. on the upper right-hand side of this screen for Click the button to save your Parental Control Rules. 29 Chapter 5 Advanced Setup You can reach this page by clicking on the following icon located at the top of the screen. The web user interface window is divided into two frames, the main menu (at left) and the display screen (on the right). The main menu has several options and selecting each of these options opens a submenu with more selections. 30 5.1 DSL 5.1.1 Mode Setting DSL(Digital Subscriber Line) offers WAN DSL Connectivity on various DSL Modes. Provides configuration for xDSL modes, various annex modes and upstream and downstream attributes. Click the Information icon information on Mode Setting. on the upper right-hand side of this screen for 31 5.1.2 Status Provides the various status and statistics information. 32 5.1.3 ATM Channel This page Displays all ATM channels configured, and allows users to delete configured channels. Please avoid deleting ATM channels on which Internet connections are configured. VPI/VCI The Identifier of the Virtual Path and the Virtual Channel for the ATM. Encapsulation The encapsulation types are LLC and VCMUX. Link Type The link type of the ATM. AAL For Types of service: AAL1, AAL2, AAL3 AAL4 and AAL5. Enable Displays the status. Actions Displays details of actions. 33 5.2 Multiple Bridge 5.2.1 LAN VLAN on the upper right-hand side of this screen for Click the Information icon information on the LAN VLAN Settings. 5.2.2 Bridges Displays Bridge Interfaces. Click the Information icon information on Bridges Settings. on the upper right-hand side of this screen for 34 5.3 Multicast This page allows you to configure the Multicast services. Click the Information icon information on Multicast Settings. on the upper right-hand side of this screen for 35 5.4 System 5.4.1 Administration This page allows users to take configuration backup, restore to previous configuration or to factory settings, upgrade firmware and reboot device. Click the Information icon information on Administration Settings. on the upper right-hand side of this screen for 36 5.4.2 User Management Configure new users with add delete and modify options. Click the button to display the following. 37 Click the Information icon information on User Management Settings. on the upper right-hand side of this screen for 5.4.3 System Time Configuration to enable the device to synchronize the system time with the time servers. Click the Information icon information on System Time Settings. on the upper right-hand side of this screen for 38 5.4.4 System Log The CPE device provides customized logging the messages to File, Remote. on the upper right-hand side of this screen for Click the Information icon information on System Log Settings. 39 5.4.5 Diagnostics Allows diagnosis to be performed on various sub-systems of the CPE. Click the button to restart the diagnostic tests. Input the IP/Host address and click the below for ping test result. button start the test. See 40 Input the url and click the trace route result. button start the test. See below for 41 5.5 Dynamic DNS Dynamic DNS allows the user to update wan IP address with one or many dynamic DNS services. So anyone can access services on computer using DNS-like address. 42 Client Settings Click the button to display the following. Click the Information icon information on Client Settings. on the upper right-hand side of this screen for 43 Supported Servers Click the button to display the following. Click the Information icon information on Server Settings. on the upper right-hand side of this screen for 44 5.6 WiFi 2.4GHz 5.6.1 Advanced Advanced settings for the wireless LAN interfaces that operate in the 2.4GHz range. Typically you shouldn't need to change these settings. The settings shown above are described below. 45 DTIM A value between 1~255. Beacon Interval 100 ms by default. Power Scale 12/25/50/100 and 100 by default. Explicit Beamforming Turned on by default. Implicit Beamforming Turned on by default. LDPC Turned on by default. STBC Turned on by default. Number of Antennas Select number of antennas; 1 or 2. WMM PS Enabled by default. 46 5.6.2 SSIDs Configure multiple virtual access points. Typical use is to allow guest access to the internet while preventing guests from connecting to your main network. Click the button to display the following. The settings shown above are described below. SSID 2.4G SSID. Security Type Select the security type from the drop-down menu; WEP, WPA1 or WPA2. 47 WPS Enabled Tick the box to enable. Click the button to display the following. The settings shown above are described below. Rekey Interval 3600 seconds by default. Passphrase The password. AP Isolation Enable/Disable AP isolation. Max Connected STAs The maximum number of STAs that can be connected. WMM-PS Enable/disable WMM power save. Bridge Name WiFi Bridge Interface Name. 48 5.6.3 WPS Connect a device by pushbutton or PIN, or connect this AP to an existing network through WPS. Click the button to reset WPS to Unconfigured mode. button, then press the WPS pushbutton on the device Click the you want to connect within two minutes. To connect a new device by PIN (Personal Identification Number), input the Client device PIN and Client device MAC address, then click the button. 49 To add this device to a network, enter the PIN in the box on the managing device. To create a new PIN, Click the button. 50 5.6.4 MAC Filtering Configurations to block devices from connecting or allow devices to connect, based on their MAC address. The settings shown above are described below. SSID 2.4G SSID. ACL Mode Select the access control list mode from the drop-down menu. To add a filter, click the button to display the following. Input the MAC address and click the or box to allow or deny. 51 5.6.5 WDS Wireless Distribution System. The settings shown above are described below. SSID 2.4G Wi-Fi SSID. WDS Mode WDS mode setting:
Disabled Legacy (Just support 802.11g with WEP) Hybrid (Support both AP and WDS functions.) Click the button to save the entry. 52 5.6.6 Statistics Displays WLAN statistics of the access point and connected devices. The settings shown above are described below. SSID 2.4G Wi-Fi SSID. 53 Associated Devices Heading MAC Address IP Address Last Tx PHY Rate Last Rx PHY Rate RSSI (dBm) RSSI2 (dBm) RSSI3 (dBm) RSSI4 (dBm) SSID Statistics Heading ACK Failure Count Aggregated Packet Count Broadcast Packets Received Broadcast Packets Sent Bytes Received Bytes Sent Discard Packets Received Discard Packets Sent Errors Received Packets not transmitted due to error Failed Retransmission Count Multicast Packets Received Multicast Packets Sent Multiple Retry Count Packets Received Packets Sent Retransmitted packets Retry Count Unicast Packets Received Unicast Packets Sent Description MAC address of the STA IP address of the STA Tx PHY Rate of the Wi-Fi connection Rx PHY Rate of the Wi-Fi connection Shows RSSI3 and RSSI4 for two antennas Description Number of ACK Failure Count Number of Aggregated Packet Count Number of Broadcast Packets Received Number of Broadcast Packets Sent Number of Bytes Received Number of Bytes Sent Number of Discard Packets Received Number of Discard Packets Sent Number of Errors Received Number of Packets not transmitted due to error Number of Failed Retransmission Count Number of Multicast Packets Received Number of Multicast Packets Sent Number of Multiple Retry Count Number of Packets Received Number of Packets Sent Number of Retransmitted packets Number of Retry Count Number of Unicast Packets Received Number of Unicast Packets Sent 54 5.6.7 Airtime Fairness Check the checkbox to display the following. Click the button to enable airtime fairness for varied wireless clients. 55 The settings shown above are described below. ATM Distribution Type Dynamic: If an STA does not fully use its grant, pass the remaining grant to Static: If an STA does not fully use its grant, do not pass it to other STAs. other STAs. ATM Algorithm Type Global: The grant(weight) allocated to STAs is equally divided between all Weighted: Each STA or SSID (VAP) has a predefined weight in % of the total STAs. airtime. Weights can be:
Per AC (Access Category) Per STA Per SSID Per SSID, then per STA ATM Interval (msecs) This is basic time frame in milliseconds that is used for ATF calculations. ATM Free Time (msecs) This is basic time frame in milliseconds that is subtracted from the ATM Interval. Default free time interval value is 0ms. VAP Level Airtime Fairness Check the checkbox to display the following. Then click the changes. icon to edit the entry. Click the button to apply your 56 Station Level Airtime Fairness Check the checkbox to display the following. Click the Then click the changes. button to add an entry. icon to edit the entry. Click the button to apply your icon to delete an entry. If required, click the 57 5.7 WiFi 5GHz 5.7.1 Advanced Advanced settings for the wireless LAN interfaces that operate in the 2.4GHz range. Typically you shouldn't need to change these settings. The settings shown above are described below. 58 DTIM A value between 1~255. Beacon Interval 100 ms by default. Power Scale 12/25/50/100 and 100 by default. Explicit Beamforming Turned on by default. Implicit Beamforming Turned on by default. LDPC Turned on by default. STBC Turned on by default. Number of Antennas Select number of antennas; 1 or 2. WMM PS Enabled by default. 59 5.7.2 SSIDs Configure multiple virtual access points. Typical use case is to allow guest access to the internet while preventing guests from connecting to your main network. Click the button to display the following. The settings shown above are described below. SSID 2.4G SSID. Security Type Select the security type from the drop-down menu; WEP, WPA1 or WPA2. WPS Enabled Tick the box to enable. 60 Click the button to display the following. The settings shown above are described below. Rekey Interval 3600 seconds by default. Passphrase The password. AP Isolation Enable/Disable AP isolation. Max Connected STAs The maximum number of STAs that can be connected. WMM-PS Enable/disable WMM power save. Bridge Name WiFi Bridge Interface Name. 61 5.7.3 WPS Connect a device by pushbutton or PIN, or connect this AP to an existing network through WPS. Click the button to reset WPS to Unconfigured mode. button, then press the WPS pushbutton on the device Click the you want to connect within two minutes. To connect a new device by PIN (Personal Identification Number), input the Client device PIN and Client device MAC address, then click the button. 62 To add this device to a network, enter the PIN in the box on the managing device. To create a new PIN, Click the button. 63 5.7.4 MAC Flitering Configurations to block devices from connecting or allow devices to connect, based on their MAC address. The settings shown above are described below. SSID 2.4G SSID. ACL Mode Select the access control list mode from the drop-down menu. 64 To add a filter, click the button to display the following. Input the MAC address and click the or box to allow or deny. 65 5.7.5 WDS Wireless Distribution System. The settings shown above are described below. SSID 2.4G Wi-Fi SSID. WDS Mode WDS mode setting:
Disabled Legacy (Just support 802.11g with WEP) Hybrid (Support both AP and WDS functions.) Click the button to save the entry. 66 5.7.6 Statistics Displays WLAN statistics of the access point and connected devices. The settings shown above are described below. SSID 5G Wi-Fi SSID. 67 Description Number of ACK Failure Count Number of Aggregated Packet Count Description MAC address of the STA IP address of the STA Tx PHY Rate of the Wi-Fi connection. Rx PHY Rate of the Wi-Fi connection. Shows RSSI3 and RSSI4 for two antennas. Associated Devices Heading MAC Address IP Address Last Tx PHY Rate Last Rx PHY Rate RSSI (dBm) RSSI2 (dBm) RSSI3 (dBm) RSSI4 (dBm) SSID Statistics Heading ACK Failure Count Aggregated Packet Count Broadcast Packets Received Number of Broadcast Packets Received Broadcast Packets Sent Bytes Received Bytes Sent Discard Packets Received Discard Packets Sent Errors Received Packets not transmitted due to error Failed Retransmission Count Multicast Packets Received Number of Multicast Packets Received Multicast Packets Sent Multiple Retry Count Packets Received Packets Sent Retransmitted packets Retry Count Unicast Packets Received Unicast Packets Sent Number of Multicast Packets Sent Number of Multiple Retry Count Number of Packets Received Number of Packets Sent Number of Retransmitted packets Number of Retry Count Number of Unicast Packets Received Number of Unicast Packets Sent Number of Broadcast Packets Sent Number of Bytes Received Number of Bytes Sent Number of Discard Packets Received Number of Discard Packets Sent Number of Errors Received Number of Packets not transmitted due to error Number of Failed Retransmission Count 68 5.7.7 Airtime Fairness Check the checkbox to display the following. Click the button to enable airtime fairness for varied wireless clients. 69 The settings shown above are described below. ATM Distribution Type Dynamic: If an STA does not fully use its grant, pass the remaining grant to Static: If an STA does not fully use its grant, do not pass it to other STAs. other STAs. ATM Algorithm Type Global: The grant(weight) allocated to STAs is equally divided between all Weighted: Each STA or SSID (VAP) has a predefined weight in % of the total STAs. airtime. Weights can be:
Per AC (Access Category) Per STA Per SSID Per SSID, then per STA ATM Interval (msecs) This is basic time frame in milliseconds that is used for ATF calculations. ATM Free Time (msecs) This is basic time frame in milliseconds that is subtracted from the ATM Interval. Default free time interval value is 0ms. VAP Level Airtime Fairness Check the checkbox to display the following. Then click the changes. icon to edit the entry. Click the button to apply your 70 Station Level Airtime Fairness Check the checkbox to display the following. Click the Then click the changes. button to add an entry. icon to edit the entry. Click the button to apply your If required, click the icon to delete an entry. 71 5.8 UPnP Click the radio button to to enable UPnP protocol and then click the button to save your choice. Click the button to refresh the screen. 72 5.9 Quality of Service Quality of Service (QoS) settings enables you to manage and optimize the performance of the applications. It shapes the network traffic and prioritizes the devices and services by controlling the bandwidth allocation. 73 5.9.1 QoS
(QoS) settings enables] you to manage and optimize the performance of the applications. Select Ingress or Egress from each of the drop-down menus LAN, WLAN, DSL, WAN and Eth WAN. Click the button to see more detail on each entry. 74 Then click the icon to edit the entry. If required, click the icon to delete an entry. Click the button to display the following. Click the Information icon information on Queue Configuration Settings. on the upper right-hand side of this screen for 75 Click the button to display the following. Click the Information icon information on Classifier Settings. on the upper right-hand side of this screen for 76 5.9.2 QoS Graphs This function is not supported on this firmware release. 77 5.9.3 Queue Stats Shows the statistics of configured queues. Click the Information icon information on Quque Statistics info. on the upper right-hand side of this screen for 78 5.10 Advanced Firewall This page allows the user to view and configure rules. Please make sure to enable Firewall and Packet filter feature. Note: New rules configured will not be applicable to existing running sessions. Warning: Use this feature judiciously. Incorrect configuration may render device inaccessible. 5.10.1 Packet Filter By enabling Packet filter, traffic can be passed or blocked at a network interface based on source and destination addresses, ports, or protocols. By default packet filter is disabled. To filter the traffic, firewall and packet filter must be enabled and a rule should be added based on source and destination address, ports or protocols. Click the button to display the following. 79 Click the Information icon information on Packet Filter settings. on the upper right-hand side of this screen for 80 5.10.2 URL Filter This page allows the user to configure URL Filter feature. Click the Information icon information on Packet Filter settings. on the upper right-hand side of this screen for 81 5.11 OAM Diagnostics This page allows user to Test OAM. 5.11.1 ATM OAM F5 Loopback Click the Information icon information on ATM OAM F5 Loopback Diagnostic results. on the upper right-hand side of this screen for 82 5.12 NAT 5.12.1 DMZ This page allows the user to view and configure the virtual DMZ Host. Such a configuration opens up the specified host to unrestricted two-way Internet access. Click the Information icon information on DMZ settings. on the upper right-hand side of this screen for 83 5.12.2 Port Mapping Configure a rule to allow remote computers (for example, computers on the Internet) to connect to a specific computer or service within a LAN. Click the button to display the following. 84 Click the Information icon information on Port Mapping settings. on the upper right-hand side of this screen for 85 5.12.3 Port Triggering Port triggering opens an incoming port when the user's computer is using a specified outgoing port(trigger) for specific traffic. Click the button to display the following. 86 on the upper right-hand side of this screen for Click the Information icon information on Port Trigger settings. 87 5.13 Device Management The settings shown above are described below. 88 Heading CWMP Enable ACS URL ACS Username ACS Password Connection Request URL Connection Request Username Connection Request Password Periodic Inform Enable Periodic Inform Interval Periodic Inform Time CWMP Retry Minimum Wait Interval CWMP Retry Interval Multiplier Description Shows if enabled or disabled ACS URL Admin by default Admin by default Connection Request URL Admin by default Admin by default Periodic Inform Enable 300 seconds by default Periodic Inform Time 5 seconds as default Max Retry Interval 2000 seconds If you need to modify the settings, first make the change, and then click the Click the Click the button. button to refresh to previous settings. button to send the inform details to the ACS server. 89 5.14 Routing Web Page to Add/Delete Static Route in the System. 5.14.1 Static Routing Click the first button to display the following (IPv4 Static Route). 90 The settings shown above are described below. Description Destination Server or Gateway IP Heading Destination IP Address Destination Subnetmask 255.255.x.x 192.168.1.x Gateway IP Address Interface connect to Destination Server or GW (br-lan or Interface ptm) 91 Click the second button to display the following (IPv6 Static Route). 92 The settings shown above are described below. Heading Destination IP Prefix NextHop Interface Description EX: 2001:DB8:3000:0/16 EX: 2001:DB8:1:1 EX: Ethernet1/0 93 5.14.2 RIP This page allows to enable or disable RIP and set mode of operation. Click the Information icon information on Routing Information Protocol settings. on the upper right-hand side of this screen for 94 Chapter 6 Logout To log out from the device simply click the following icon located at the top of your screen. Upon successful exit, the following message will be displayed. 95 Appendix A Specifications Hardware RJ-11 X1 for VDSL2 (35b)/ADSL2+ (Annex A) RJ-45 X 4 for GELAN RJ-45 X 1 for GEWAN Reset button X 1 WPS button X 1 Guest WiFi button X 1 Internal Antenna X 2 Power switch X 1 ADSL G.994 G.992.1 (G.dmt) Annexes A G.992.2 (G.lite) Annexes A ANSI T1.413 G.992.3 (ADSL2) Annexes A G.992.5 (ADSL2+) Annexes A VDSL G.993.2(VDSL2) 35b, 30a, 17a, 12a, 12b, 8a, 8b, 8c, 8d G.993.5 (G.vector) G.998.4 (G.INP) SRA (Seamless Rate Adaptation) UPBO (Upstream Power Back-off) Ethernet IEEE 802.3, IEEE 802.3u IEEE 802.3ab 10/100 /1000 BASE-T, auto-sense Support MDI/MDX Networking Protocols RFC 2364 (PPPoA), RFC 2684 (RFC 1483) Bridge/Router, RFC 2516 (PPPoE); RFC 1577 (IPoA) PPPoE Pass-Through, Multiple PPPoE Sessions on Single WAN Interface PPPoE Filtering of Non-PPPoE Packets Between WAN and LAN Transparent Bridging Between all LAN and WAN Interfaces 802.1p/802.1q VLAN, DSCP IGMP Proxy V1/V2/V3, IGMP Snooping V1/V2/V3, Fast leave Static route, RIP v1/v2, ARP, RARP, SNTP DHCP Server/Client/Relay, DNS Proxy/ Relay, Dynamic DNS, UPnP, DLNA IPv6 Dual Stack, IPV6 Rapid Deployment (6RD) 96 Management TR-069/TR-098/TR-104/TR-111/TR-181, SNMP, Telnet, Web- Based Management, Configuration Backup and Restoration Software Upgrade via HTTP, TFTP Server, or FTP Server Firewall/Filtering Stateful Packet Inspection Firewall Stateless Packet Filter URI/URL Filtering TCP/IP/Port/Interface Filtering Rules Support Both Incoming and Outgoing Filtering NAT/PAT Port Triggering Port Forwarding (Virtual Server) Symmetric port-overloading NAT, Full-Cone NAT DMZ host VPN Pass Through (PPTP, L2TP, IPSec) Wireless IEEE 802.11n, 2.4GHz, 2T2R Backward compatible with 802.11g/b 24122462 MHz IEEE 802.11ac,5GHz, 2T2R, Backward compatible with 802.11n/a U-NII-1 ( 51505250 MHz ) U-NII-3 ( 57255825 MHz ) WPA/WPA-PSK, WPA2/WPA2-PSK with TKIP & AES Security Type Multiple SSID MAC Address Filtering Power Supply External power adapter: 12Vdc/ 2.0A Certification FCC, UL, IC, cUL standard Note : Specification are subject to change without note. Environment Operating Temperature: 0C ~40C (32F ~104F) Operating Humidity: 10%~90% non-condensing Storage Temperature: -25C ~65C (-23F ~149F) Storage Humidity: 5%~90% non-condensing Kit Contents
(1*VR-3053, 1*RJ11 cable, 1*RJ45 cable, 1*power adapter, 1*CD-ROM) NOTE: Specifications are subject to change without notice 97 Appendix B - SSH Client Unlike Microsoft Windows, Linux OS has a ssh client included. For Windows users, there is a public domain one called putty that can be downloaded from here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html To access the ssh client you must first enable SSH access for the LAN or WAN from the Management Access Control Services menu in the web user interface. To access the router using the Linux ssh client For LAN access, type: ssh -l root 192.168.1.1 For WAN access, type: ssh -l root WAN IP address To access the router using the Windows putty ssh client For LAN access, type: putty -ssh -l root 192.168.1.1 For WAN access, type: putty -ssh -l root WAN IP address NOTE: The WAN IP address can be found on the Device Info WAN screen 98
1 2 3 4 | Ext Photos | External Photos | 1.97 MiB |
CERPASS TECHNOLOGY CORP. Report No.: 1910144 Photographs of EUT Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 1 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Antenna position Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 2 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Antenna connect position Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 3 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 2.4G RF CHIP Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 4 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Adapter(12V/2.0A) 5G RF CHIP Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 5 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 6 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Adapter(12V/1.5A) Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 7 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 8 of 9 CERPASS TECHNOLOGY CORP. Report No.: 1910144 Cerpass Technology Corp. Issued Date
: Oct. 23, 2019 Page No.
: 9 of 9
1 2 3 4 | Int Photos | Internal Photos | 698.63 KiB | June 10 2019 |
CERPASS TECHNOLOGY CORP. Report No.: 1901103 Photographs of EUT Antenna position Antenna connect position Cerpass Technology Corp. Issued Date
: May. 13, 2019 Page No.
: 1 of 3 CERPASS TECHNOLOGY CORP. Report No.: 1901103 Cerpass Technology Corp. Issued Date
: May. 13, 2019 Page No.
: 2 of 3 CERPASS TECHNOLOGY CORP. Report No.: 1901103 2.4G RF CHIP 5G RF CHIP Cerpass Technology Corp. Issued Date
: May. 13, 2019 Page No.
: 3 of 3
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2019-11-22 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Class II Permissive Change |
2 | 2422 ~ 2452 | DTS - Digital Transmission System | ||
3 | 2019-10-06 | 5775 ~ 5775 | NII - Unlicensed National Information Infrastructure TX | Original Equipment |
4 | 2422 ~ 2452 | DTS - Digital Transmission System |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2019-11-22
|
||||
1 2 3 4 |
2019-10-06
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
Comtrend Corporation
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0010188456
|
||||
1 2 3 4 | Physical Address |
3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist
|
||||
1 2 3 4 |
3F-1, 10 Lane 609, Chung Hsin Road, Section 5
|
|||||
1 2 3 4 |
New Taipei City,
|
|||||
1 2 3 4 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
b******@baclcorp.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
L9V
|
||||
1 2 3 4 | Equipment Product Code |
VR3053
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
B******** W********
|
||||
1 2 3 4 | Telephone Number |
+886-********
|
||||
1 2 3 4 | Fax Number |
+886-********
|
||||
1 2 3 4 |
b******@comtrend.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Home Gateway | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. | ||||
1 2 3 4 | Class II Permissive Change application documented in this filing. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz and 40 MHz bandwidth modes. | |||||
1 2 3 4 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. | |||||
1 2 3 4 | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The device supports 20 MHz and 40 MHz bandwidth modes. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
Cerpass technology corporation Test Laboratory
|
||||
1 2 3 4 | Name |
B******** W****
|
||||
1 2 3 4 | Telephone Number |
+886-******** Extension:
|
||||
1 2 3 4 | Fax Number |
+886-********
|
||||
1 2 3 4 |
b******@cerpass.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 68 CC MO | 5180 | 5240 | 0.172 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 68 CC MO | 5210 | 5210 | 0.22 | |||||||||||||||||||||||||||||||||||
1 | 3 | 15E | 68 CC MO | 5745 | 5825 | 0.149 | |||||||||||||||||||||||||||||||||||
1 | 4 | 15E | 68 CC MO | 5775 | 5775 | 0.319 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 68 CC MO | 2412 | 2462 | 0.881 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15C | 68 CC MO | 2422 | 2452 | 0.917 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 68 CC MO | 5180 | 5240 | 0.172 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 68 CC MO | 5210 | 5210 | 0.22 | |||||||||||||||||||||||||||||||||||
3 | 3 | 15E | 68 CC MO | 5745 | 5825 | 0.149 | |||||||||||||||||||||||||||||||||||
3 | 4 | 15E | 68 CC MO | 5775 | 5775 | 0.319 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | 68 CC MO | 2412 | 2462 | 0.881 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | 68 CC MO | 2422 | 2452 | 0.917 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC