all | frequencies |
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual-1 | Users Manual | 5.64 MiB | / February 10 2016 | |||
1 2 |
|
User Manual-2 | Users Manual | 2.67 MiB | / February 10 2016 | |||
1 2 |
|
Internal Photos | Internal Photos | 900.44 KiB | / February 10 2016 | |||
1 2 |
|
External Photos | External Photos | 357.21 KiB | / February 10 2016 | |||
1 2 |
|
Label & Label Location | ID Label/Location Info | 271.61 KiB | / February 10 2016 | |||
1 2 |
|
Authorization letter | Cover Letter(s) | 93.59 KiB | / February 10 2016 | |||
1 2 | Block Diagram | Block Diagram | September 30 2016 | confidential | ||||
1 2 |
|
DOC Attestation Letter | Attestation Statements | 66.71 KiB | / February 10 2016 | |||
1 2 |
|
DTS Ch12&13 Declaration letter | Cover Letter(s) | 169.99 KiB | / February 10 2016 | |||
1 2 |
|
LTC Letter | Cover Letter(s) | 106.14 KiB | / February 10 2016 | |||
1 2 | Operational Description | Operational Description | September 30 2016 | confidential | ||||
1 2 |
|
RF Exposure Report | RF Exposure Info | 259.94 KiB | / February 10 2016 | |||
1 2 |
|
RF Test Report | Test Report | 3.42 MiB | / February 10 2016 | |||
1 2 | Test Setup Photos | / February 10 2016 | ||||||
1 2 | Schematics | Schematics | September 30 2016 | confidential | ||||
1 2 | SW Declaration letter | Operational Description | September 30 2016 | confidential |
1 2 | User Manual-1 | Users Manual | 5.64 MiB | / February 10 2016 |
VR-3060u, VR-3060 Wireless Gateway User Manual 261099-038 Version A1.0, December 22, 2015 Preface This manual provides information related to the installation and operation of this device. The individual reading this manual is presumed to have a basic understanding of telecommunications terminology and concepts. If you find the product to be inoperable or malfunctioning, please contact technical support for immediate service by email at INT-support@comtrend.com For product update, new product release, manual revision, or software upgrades, please visit our website at http://www.comtrend.com Important Safety Instructions With reference to unpacking, installation, use, and maintenance of your electronic device, the following basic guidelines are recommended:
Do not use or install this product near water, to avoid fire or shock hazard. For example, near a bathtub, kitchen sink or laundry tub, or near a swimming pool. Also, do not expose the equipment to rain or damp areas (e.g. a wet basement). Do not connect the power supply cord on elevated surfaces. Allow it to lie freely. There should be no obstructions in its path and no heavy items should be placed on the cord. In addition, do not walk on, step on, or mistreat the cord. Use only the power cord and adapter that are shipped with this device. To safeguard the equipment against overheating, make sure that all openings in the unit that offer exposure to air are not blocked. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightening. Also, do not use the telephone to report a gas leak in the vicinity of the leak. Never install telephone wiring during stormy weather conditions. CAUTION:
(cid:132) To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
(cid:132) Always disconnect all telephone lines from the wall outlet before servicing or disassembling this equipment. WARNING
(cid:132) Disconnect the power line from the device before servicing.
(cid:132) Power supply specifications are clearly stated in Appendix C -
Specifications. 1 FCC & ISED User Information Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. Aucune modification apporte lappareil par lutilisateur, quelle quen soit la nature. Tout changement ou modification peuvent annuler le droit dutilisation de lappareil par lutilisateur. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power
(e.i.r.p.) is not more than that permitted for successful communication. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil numrique de la classe B est conforme la norme NMB-003 Canada. Pour rduire le risque dinterfrence aux autres utilisateurs, le type dantenne et son gain doivent tre choisies de faon que la puissance isotrope rayonne quivalente (PIRE) ne dpasse pas ce qui est ncessaire pour une communication russie. Cet appareil est conforme la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est soumis aux deux conditions suivantes:
1. Cet appareil ne peut pas provoquer dinterfrences et 2. Cet appareil doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif. 2 Radiation Exposure FCC ID: L9VVR3060U IC: 4013A-VR3060U US: 5SYDL01ANL3240U REN: 0.1A FCC 1. This Transmitter must not be colocated or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. ISED This device complies with the ISED radiation exposure limit set forth for an uncontrolled environment. This device should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet quipement est conforme avec l'exposition aux radiations ISED dfinies pour un environnement non contrl. Cet quipement doit tre install et utilis une distance minimum de 20 cm entre le radiateur et votre corps. Cet metteur ne doit pas tre co-localises ou oprant en conjonction avec une autre antenne ou transmetteur. Operations in the 5.15-5.25Ghz band are restricted to indoor usage only. Le fonctionnement sur la bande 5,155,25Ghz est limit une utilisation intrieure uniquement. This radio transmitter (identify the device by certification number) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Model Name: AN2450-64D02BBO Type: External Gain:
2.4G: 2.5 dBi 5G: 2.5 dBi Model Name: AN2450-64D03BBO Type: External Gain:
3 2.4G: 1.2 dBi 5G: 2.5 dBi The REN statement is the following:
"The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices subject only to the requirement that the sum of the RENs of all the devices not exceed five."
Copyright Copyright2015 Comtrend Corporation. All rights reserved. The information contained herein is proprietary to Comtrend Corporation. No part of this document may be translated, transcribed, reproduced, in any form, or by any means without prior written consent of Comtrend Corporation. This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/
NOTE:
This document is subject to change without notice. Protect Our Environment This symbol indicates that when the equipment has reached the end of its useful life, it must be taken to a recycling centre and processed separate from domestic waste. The cardboard box, the plastic contained in the packaging, and the parts that make up this router can be recycled in accordance with regionally established regulations. Never dispose of this electronic equipment along with your household waste; you may be subject to penalties or sanctions under the law. Instead, please be responsible and ask for disposal instructions from your local government. 4 Table of Contents 4.2.1 4.2.2 4.2.3 4.2.4 CHAPTER 1 INTRODUCTION ........................................................................................................... 8 CHAPTER 2 INSTALLATION ............................................................................................................. 9 2.1 HARDWARE SETUP ........................................................................................................................... 9 2.2 LED INDICATORS .......................................................................................................................... 11 CHAPTER 3 WEB USER INTERFACE ............................................................................................ 13 3.1 DEFAULT SETTINGS ....................................................................................................................... 13 3.2 IP CONFIGURATION ........................................................................................................................ 14 3.3 LOGIN PROCEDURE ........................................................................................................................ 16 CHAPTER 4 DEVICE INFORMATION ........................................................................................... 18 4.1 WAN ............................................................................................................................................. 20 4.2 STATISTICS ..................................................................................................................................... 21 LAN Statistics ................................................................................................................. 21 WAN Service ................................................................................................................... 22 XTM Statistics ................................................................................................................. 23 xDSL Statistics ................................................................................................................ 24 4.3 ROUTE ........................................................................................................................................... 29 4.4 ARP............................................................................................................................................... 30 4.5 DHCP ........................................................................................................................................... 30 4.6 NAT SESSION ................................................................................................................................ 32 4.7 IGMP INFO .................................................................................................................................... 33 4.8 IPV6 .............................................................................................................................................. 34 4.8.1 IPv6 Info ................................................................................................................................ 34 4.8.2 IPv6 Neighbor ....................................................................................................................... 35 4.8.3 IPv6 Route ............................................................................................................................. 36 4.9 CPU & MEMORY ........................................................................................................................... 37 4.10 NETWORK MAP ........................................................................................................................... 38 4.11 WIRELESS .................................................................................................................................... 38 4.11.1 Station Info ........................................................................................................................... 38 4.11.2 Site Survey............................................................................................................................ 40 CHAPTER 5 BASIC SETUP ............................................................................................................... 42 5.1 WAN SETUP ................................................................................................................................... 43 5.1.1 WAN Service Setup ................................................................................................................ 44 5.2 NAT .............................................................................................................................................. 45 Virtual Servers ................................................................................................................ 45 5.2.1 Port Triggering ............................................................................................................... 47 5.2.2 5.2.3 DMZ Host ....................................................................................................................... 49 5.2.4 IP Address Map............................................................................................................... 50 5.2.5 ALG/Pass-Through ......................................................................................................... 51 5.3 LAN .............................................................................................................................................. 52 5.3.1 LAN IPv6 Autoconfig ............................................................................................................. 55 5.3.2 Static IP Neighbor ................................................................................................................. 58 5.3.3 UPnP ..................................................................................................................................... 59 5.4 WIRELESS ...................................................................................................................................... 60 5.4.1 Basic 5GHz ............................................................................................................................ 60 5.4.2 Security 5GHz ........................................................................................................................ 62 5.4.3 Basic 2.4GHz ......................................................................................................................... 65 5.4.4 Security 2.4GHz ..................................................................................................................... 67 5.5 PARENTAL CONTROL ..................................................................................................................... 70 Time Restriction .............................................................................................................. 70 URL Filter ....................................................................................................................... 71 5.6 HOME NETWORKING ...................................................................................................................... 73 5.6.1 Print Server ........................................................................................................................... 73 5.6.2 DLNA ..................................................................................................................................... 73 5.6.3 Storage Service ...................................................................................................................... 74 5.6.4 USB Speed ............................................................................................................................. 75 5.5.1 5.5.2 5 6.9.1 6.9.2 6.4.1 6.4.2 6.4.3 6.4.4 CHAPTER 6 ADVANCED SETUP ..................................................................................................... 76 6.1 AUTO-DETECTION SETUP ............................................................................................................... 76 6.2 SECURITY ...................................................................................................................................... 81 6.2.1 IP Filtering ..................................................................................................................... 81 6.2.2 MAC Filtering ................................................................................................................. 85 6.3 QUALITY OF SERVICE (QOS) .......................................................................................................... 87 6.3.1 QoS Queue ...................................................................................................................... 88 6.3.1.1 QoS Queue Configuration .............................................................................................. 88 6.3.1.2 Wlan Queue .................................................................................................................... 92 6.3.2 QoS Classification .......................................................................................................... 93 6.3.3 QoS Port Shaping ........................................................................................................... 95 6.4 ROUTING ....................................................................................................................................... 96 Default Gateway ............................................................................................................. 96 Static Route ..................................................................................................................... 97 Policy Routing ................................................................................................................ 98 RIP .................................................................................................................................. 99 6.5 DNS ............................................................................................................................................ 100 6.5.1 DNS Server ................................................................................................................... 100 6.5.2 Dynamic DNS ............................................................................................................... 101 6.5.3 DNS Entries .................................................................................................................. 102 6.5.4 DNS Proxy/Relay .......................................................................................................... 103 6.6 DSL ............................................................................................................................................. 104 6.7 INTERFACE GROUPING ................................................................................................................. 106 6.8 IP TUNNEL ................................................................................................................................... 109 6.8.1 IPv6inIPv4 ........................................................................................................................... 109 6.8.2 IPv4inIPv6 ........................................................................................................................... 110 6.9 CERTIFICATE ................................................................................................................................ 111 Local ............................................................................................................................. 111 Trusted CA .................................................................................................................... 113 6.10 POWER MANAGEMENT .............................................................................................................. 114 6.11 MULTICAST ................................................................................................................................ 115 6.12 WIRELESS .................................................................................................................................. 117 6.12.1 Basic 5GHz ........................................................................................................................ 117 6.12.2 Security 5GHz .................................................................................................................... 119 6.12.3 WPS 5GHz ......................................................................................................................... 122 6.12.4 MAC Filter 5GHz .............................................................................................................. 125 6.12.5 Wireless Bridge .................................................................................................................. 126 6.12.6 Advanced 5GHz ................................................................................................................. 127 6.12.7 Basic 2.4GHz ..................................................................................................................... 131 6.12.8 Security 2.4GHz ................................................................................................................. 133 6.12.9 WPS 2.4GHz ...................................................................................................................... 136 6.12.10 MAC Filter 2.4GHz ......................................................................................................... 139 6.12.11 Wireless Bridge 2.4GHz ................................................................................................... 141 6.12.12 Advanced 2.4GHz ............................................................................................................ 142 CHAPTER 7 DIAGNOSTICS ........................................................................................................... 145 7.1 DIAGNOSTICS INDIVIDUAL TESTS ............................................................................................. 145 7.2 ETHERNET OAM ......................................................................................................................... 146 7.3 UPTIME STATUS ........................................................................................................................... 148 7.4 PING ............................................................................................................................................ 149 7.5 TRACE ROUTE ............................................................................................................................. 150 CHAPTER 8 MANAGEMENT ........................................................................................................ 151 8.1 SETTINGS ..................................................................................................................................... 151 Backup Settings ............................................................................................................. 151 Update Settings ............................................................................................................. 152 Restore Default ............................................................................................................. 152 8.2 SYSTEM LOG ............................................................................................................................... 154 8.3 SNMP AGENT ............................................................................................................................. 156 8.4 TR-069 CLIENT ........................................................................................................................... 157 8.5 INTERNET TIME ........................................................................................................................... 159 8.1.1 8.1.2 8.1.3 6 8.6 ACCESS CONTROL ....................................................................................................................... 160 8.6.1 Accounts ........................................................................................................................... 160 8.6.2 Services ............................................................................................................................. 162 8.6.3 IP Address ......................................................................................................................... 163 8.7 WAKE-ON-LAN ........................................................................................................................... 164 8.8 UPDATE SOFTWARE ..................................................................................................................... 165 8.9 REBOOT ....................................................................................................................................... 166 CHAPTER 9 LOGOUT ..................................................................................................................... 167 APPENDIX A - FIREWALL ............................................................................................................. 168 APPENDIX B - PIN ASSIGNMENTS .............................................................................................. 171 APPENDIX C SPECIFICATIONS ................................................................................................ 172 APPENDIX D - SSH CLIENT .......................................................................................................... 174 APPENDIX E - PRINTER SERVER ................................................................................................ 175 APPENDIX F - CONNECTION SETUP .......................................................................................... 181 7 Chapter 1 Introduction VR-3060 is a Multi-DSL solution for high-performance Internet access. In addition, VR-3060 supports high power (400mw/26 dBm) dual bands (802.11n 2.4GHz &
802.11ac 5GHz) to create a large Wi-Fi footprint for the most seamless video experience as well as blazing fast data speed and a toll-quality voice experience. 8 Chapter 2 Installation 2.1 Hardware Setup Follow the instructions below to complete the hardware setup. Non-stackable This device is not stackable do not place units on top of each other, otherwise damage could occur. BACK PANEL The figure below shows the back panel of the device. Power ON Press the power button to the OFF position (OUT). Connect the power adapter to the power port. Attach the power adapter to a wall outlet or other AC source. Press the power button to the ON position (IN). If the Power LED displays as expected then the device is ready for setup (see section 2.2 LED Indicators). Caution 1: If the device fails to power up, or it malfunctions, first verify that the power cords are connected securely and then power it on again. If the problem persists, contact technical support. Caution 2: Before servicing or disassembling this equipment, disconnect all power cords and telephone lines from their outlets. Reset Button Restore the default parameters of the device by pressing the Reset button for 10 seconds. After the device has rebooted successfully, the front panel should display as expected (see section 2.2 LED Indicators for details). NOTE: If pressed down for more than 60 seconds, the VR-3060 will go into a firmware update state (CFE boot mode). The firmware can then be updated using an Internet browser pointed to the default IP address. 9 ETH WAN PORT This port has the same features as the LAN ports described below with additional Ethernet WAN functionality. Ethernet (LAN) Ports Use 1000-BASE-T RJ-45 cables to connect up to four network devices to a Gigabit LAN, or 10/100BASE-T RJ-45 cables for standard network usage. These ports are auto-sensing MDI/X; so either straight-through or crossover cable can be used. USB Host Port (Type A) This port can be used to connect the router to a printer, or supported USB devices. DSL Port Connect to an ADSL2/2+ or VDSL with this RJ11 Port. This device contains a micro filter which removes the analog phone signal. If you wish, you can connect a regular telephone to the same line by using a POTS splitter. FRONT PANEL 2.4G WiFi On/Off & WPS Button Press and release the WiFi-WPS button to activate WPS for the 2.4GHz WiFi interface (make sure the WPS is enabled in Wireless->2.4GHz->Security page). Press and hold WiFi-WPS button more than 10 seconds to enable/disable 2.4GHz WiFi. 5G WiFi On/Off & WPS Button Press and release the WiFi-WPS button to activate WPS for the 5GHz WiFi interface
(make sure the WPS is enabled in Wireless->5GHz->Security page). Press and hold WiFi-WPS button more than 10 seconds to enable/disable 5GHz WiFi. 10 2.2 LED Indicators The front panel LED indicators are shown below and explained in the following table. This information can be used to check the status of the device and its connections. LED Color Mode Function POWER ETH WAN ETH 4 to 1 GREEN On Off RED On The device is powered up. The device is powered down. POST (Power On Self Test) failure or other malfunction. A malfunction is any error of internal sequence or state that will prevent the device from connecting to the DSLAM or passing customer data. GREEN ORANGE GREEN ORANGE On WAN is connected in 1000 Mbps. Ethernet WAN is not connected. Off Blink In TX/RX over 1000 Mbps Ethernet is connected in 10/100 Mbps. On Ethernet WAN is not connected. Off Blink In TX/RX over 10/100 Mbps. Ethernet is connected at 1000 Mbps. On Ethernet is not connected. Off In TX/RX over 1000 Mbps. Blink Ethernet is connected at 10/100 Mbps. On Ethernet is not connected. Off In TX/RX over 10/100 Mbps. Blink On WPS(2.4G) WPS enabled and client connected to WLAN. WPS GREEN Off WPS(2.4G) WPS disabled. Blink WPS(2.4G) WPS connection in progress, 120 seconds or until client connected. On WPS(5G WPS enabled and client connected to WLAN. ORANGE Off WPS(5G) WPS disabled. Blink WPS(5G) WPS connection in progress, 120 seconds WiFi 2.4G GREEN On Off or until client connected. The wireless module is ready.
(i.e. installed and enabled). The wireless module is not ready.
(i.e. either not installed or disabled). Blink Data transmitting or receiving over WLAN. 11 WiFi 5G GREEN On Off The wireless module is ready.
(i.e. installed and enabled). The wireless module is not ready.
(i.e. either not installed or disabled). DSL GREEN Blink Data transmitting or receiving over WLAN. On Off Blink The xDSL link is training or some traffic is passing xDSL Link is established. xDSL Link is not established. On through xDSL. IP connected and no traffic detected. If an IP or PPPoE session is dropped due to an idle timeout, the light will remain green if an ADSL connection is still present. GREEN Off Modem power off, modem in bridged mode or ADSL INTERNET Blink RED On connection not present. In addition, if an IP or PPPoE session is dropped for any reason, other than an idle timeout, the light is turned off. IP connected and IP Traffic is passing thru the device (either direction) Device attempted to become IP connected and failed (no DHCP response, no PPPoE response, PPPoE authentication failed, no IP address from IPCP, etc.) 12 Chapter 3 Web User Interface This section describes how to access the device via the web user interface (WUI) using an Internet browser such as Internet Explorer (version 5.0 and later). 3.1 Default Settings The factory default settings of this device are summarized below. LAN IP address: 192.168.1.1 LAN subnet mask: 255.255.255.0 Administrative access (username: root, password: 12345) User access (username: user, password: user) Remote (WAN) access (username: support, password: support) WLAN access: enabled Technical Note During power on, the device initializes all settings to default values. It will then read the configuration profile from the permanent storage section of flash memory. The default attributes are overwritten when identical attributes with different values are configured. The configuration profile in permanent storage can be created via the web user interface or telnet user interface, or other management protocols. The factory default configuration can be restored either by pushing the reset button for more than ten seconds until the power indicates LED blinking or by clicking the Restore Default Configuration option in the Restore Settings screen. 13 3.2 IP Configuration DHCP MODE When the VR-3060 powers up, the onboard DHCP server will switch on. Basically, the DHCP server issues and reserves IP addresses for LAN devices, such as your PC. To obtain an IP address from the DCHP server, follow the steps provided below. NOTE:
The following procedure assumes you are running Windows. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Select Obtain an IP address automatically as shown below. STEP 4: Click OK to submit these settings. If you experience difficulty with DHCP mode, you can try static IP mode instead. 14 STATIC IP MODE In static IP mode, you assign IP settings to your PC manually. Follow these steps to configure your PC IP address to use subnet 192.168.1.x. NOTE:
The following procedure assumes you are running Windows. However, the general steps involved are similar for most operating systems (OS). Check your OS support documentation for further details. STEP 1: From the Network Connections window, open Local Area Connection (You may also access this screen by double-clicking the Local Area Connection icon on your taskbar). Click the Properties button. STEP 2: Select Internet Protocol (TCP/IP) and click the Properties button. STEP 3: Change the IP address to the 192.168.1.x (1<x<255) subnet with subnet mask of 255.255.255.0. The screen should now display as shown below. STEP 4: Click OK to submit these settings. 15 3.3 Login Procedure Perform the following steps to login to the web user interface. NOTE:
STEP 1: Start the Internet browser and enter the default IP address for the device The default settings can be found in section 3.1 Default Settings. in the Web address field. For example, if the default IP address is 192.168.1.1, type http://192.168.1.1. NOTE:
For local administration (i.e. LAN access), the PC running the browser must be attached to the Ethernet, and not necessarily to the device. For remote access (i.e. WAN), use the IP address shown on the Device Information screen and login with remote username and password. STEP 2: A dialog box will appear, such as the one below. Enter the default username and password, as defined in section 3.1 Default Settings. Click OK to continue. NOTE: The login password can be changed later (see section 8.6.1 Accounts). 16 STEP 3: After successfully logging in for the first time, you will reach this screen. You can also reach this page by clicking on the following icon located at the top of the screen. 17 Chapter 4 Device Information You can reach this page by clicking on the following icon located at the top of the screen. The web user interface window is divided into two frames, the main menu (on the left) and the display screen (on the right). The main menu has several options and selecting each of these options opens a submenu with more selections. NOTE: The menu items shown are based upon the configured connection(s) and user account privileges. For example, user account has limited access to configuration modification. Device Info is the first selection on the main menu so it will be discussed first. Subsequent chapters will introduce the other main menu options in sequence. The Device Info Summary screen displays at startup. 18 This screen shows hardware, software, IP settings and other related information. 19 4.1 WAN Select WAN from the Device Info submenu to display the configured PVC(s). Heading Interface Description Type VlanMuxId IPv6 Igmp Pxy Igmp Src Enbl MLD Pxy MLD Src Enbl NAT Firewall Status IPv4 Address IPv6 Address Description Name of the interface for WAN Name of the WAN connection Shows the connection type Shows 802.1Q VLAN ID Shows WAN IPv6 status Shows Internet Group Management Protocol (IGMP) proxy status Shows the status of WAN interface used as IGMP source Shows Multicast Listener Discovery (MLD) proxy status Shows the status of WAN interface used as MLD source Shows Network Address Translation (NAT) status Shows the status of Firewall Lists the status of DSL link Shows WAN IPv4 address Shows WAN IPv6 address 20 4.2 Statistics This selection provides LAN, WAN, ATM and xDSL statistics. NOTE:
These screens are updated automatically every 15 seconds. Click Reset Statistics to perform a manual update. 4.2.1 LAN Statistics This screen shows data traffic statistics for each LAN interface. Heading Interface Received/Transmitted: - Bytes
- Pkts
- Errs
- Drops Description LAN interface(s) Number of Bytes Number of Packets Number of packets with errors Number of dropped packets 21 4.2.2 WAN Service This screen shows data traffic statistics for each WAN interface. Heading Interface Description Received/Transmitted - Bytes
- Pkts
- Errs
- Drops Description WAN interfaces WAN service label Number of Bytes Number of Packets Number of packets with errors Number of dropped packets 22 4.2.3 XTM Statistics The following figure shows ATM (Asynchronous Transfer Mode)/PTM (Packet Transfer Mode) statistics. Description ATM PORT (0-1) Number of octets received over the interface Number of octets transmitted over the interface Number of packets received over the interface Number of packets transmitted over the interface Number of OAM Cells received over the interface Number of OAM Cells transmitted over the interface Number of ASM Cells received over the interface Number of ASM Cells transmitted over the interface Number of packets in Error Number of cells in Error XTM Interface Statistics Heading Port Number In Octets Out Octets In Packets Out Packets In OAM Cells Out OAM Cells In ASM Cells Out ASM Cells In Packet Errors In Cell Errors 23 4.2.4 xDSL Statistics The xDSL Statistics screen displays information corresponding to the xDSL type. The two examples below (VDSL & ADSL) show this variation. VDSL 24 ADSL Click the Reset Statistics button to refresh this screen. Field Mode Traffic Type Status Link Power State phyR Status Description VDSL, VDSL2 ATM, PTM Lists the status of the DSL link Link output power state Shows the status of PhyR (Physical Layer Re-Transmission) impulse noise protection 25 Field Line Coding (Trellis) SNR Margin (0.1 dB) Attenuation (0.1 dB) Description Trellis On/Off Signal to Noise Ratio (SNR) margin Estimate of average loop attenuation in the downstream direction Total upstream output power Current sync rates downstream/upstream Number of bytes in overhead channel message Number of bytes in Mux Data Frame Number of Mux Data Frames in a RS codeword Number of Mux Data Frames in an OH sub-frame Number of redundancy bytes in the RS codeword Number of data symbols the RS codeword spans Number of bits transmitted in each data symbol The interleaver depth The interleaver block size in bytes RS codeword size The delay in milliseconds (msec) DMT symbol Output Power
(0.1 dBm) Attainable Rate (Kbps) The sync rate you would obtain Rate (Kbps) In VDSL mode, the following section is inserted. MSGc B M T R S L D I N Delay INP Super Frames Super Frame Errors RS Words RS Correctable Errors RS Uncorrectable Errors Total Number of RS words with uncorrectable errors OH Frames OH Frame Errors RS Words RS Correctable Errors RS Uncorrectable Errors Total Number of RS words with uncorrectable errors HEC Errors OCD Errors LCD Errors Total Cells Data Cells Bit Errors Total Number of Header Error Checksum errors Total Number of Out-of-Cell Delineation errors Total number of Loss of Cell Delineation Total number of ATM cells (including idle + data cells) Total number of ATM data cells Total number of bit errors Total number of super frames Number of super frames received with errors Total number of Reed-Solomon code errors Total Number of RS with correctable errors Total number of OH frames Number of OH frames received with errors Total number of Reed-Solomon code errors Total Number of RS with correctable errors 26 Total ES Total SES Total UAS Total Number of Errored Seconds Total Number of Severely Errored Seconds Total Number of Unavailable Seconds xDSL BER TEST Click xDSL BER Test on the xDSL Statistics screen to test the Bit Error Rate (BER). A small pop-up window will open after the button is pressed, as shown below. Click Start to start the test or click Close to cancel the test. After the BER testing is complete, the pop-up window will display as follows. 27 xDSL TONE GRAPH Click Draw Graph on the xDSL Statistics screen and a pop-up window will display the xDSL statistics graph, including SNR, Bits per tone, QLN and Hlog of the xDSL line connection, as shown below. 28 4.3 Route Choose Route to display the routes that the VR-3060 has found. Field Destination Gateway Subnet Mask Flag Metric Service Interface Description Destination network or destination host Next hop IP address Subnet Mask of Destination U: route is up
!: reject route G: use gateway H: target is a host R: reinstate route for dynamic routing D: dynamically installed by daemon or redirect M: modified from routing daemon or redirect The 'distance' to the target (usually counted in hops). It is not used by recent kernels, but may be needed by routing daemons. Shows the WAN connection label Shows connection interfaces 29 4.4 ARP Click ARP to display the ARP information. Description Shows IP address of host PC Complete, Incomplete, Permanent, or Publish Field IP address Flags HW Address Shows the MAC address of host PC Device Shows the connection interface 4.5 DHCP Click DHCP to display all DHCP Leases. Field Hostname MAC Address IP Address Expires In Description Shows the device/host/PC network name Shows the Ethernet MAC address of the device/host/PC Shows IP address of device/host/PC Shows how much time is left for each DHCP Lease 30 Field IPv6 Address MAC Address Duration Expires In Description Shows IP address of device/host/PC Shows the Ethernet MAC address of the device/host/PC Shows leased time in hours Shows how much time is left for each DHCP Lease 31 4.6 NAT Session This page displays all NAT connection session including both UPD/TCP protocols passing through the device. Click the Show All button to display the following. Description The source IP from which the NAT session is established The source port from which the NAT session is established Field Source IP Source Port Destination IP The IP which the NAT session was connected to Destination Port The port which the NAT session was connected to Protocol Timeout The Protocol used in establishing the particular NAT session The time remaining for the TCP/UDP connection to be active 32 4.7 IGMP Info Click IGMP Info to display the list of IGMP entries broadcasting through IGMP proxy enabled wan connection. Description The Source interface from which the IGMP report was received The WAN interface from which the multicast traffic is received The destination IGMP group address The Source IP from which the IGMP report was received The time remaining before the IGMP report expires Field Interface WAN Groups Member Timeout 33 4.8 IPv6 4.8.1 IPv6 Info Click IPv6 Info to display the IPv6 WAN connection info. Field Interface Status Address Prefix Device Link-local Address The CPE's LAN Address Default IPv6 Gateway IPv6 DNS Server Description WAN interface with IPv6 enabled Connection status of the WAN interface IPv6 Address of the WAN interface Prefix received/configured on the WAN interface The default WAN IPv6 gateway The IPv6 DNS servers received from the WAN interface
/ configured manually 34 4.8.2 IPv6 Neighbor Click IPv6 Neighbor to display the list of IPv6 nodes discovered. Field IPv6 Address Flags HW Address Device Description Ipv6 address of the device(s) found Status of the neighbor device MAC address of the neighbor device Interface from which the device is located 35 4.8.3 IPv6 Route Click IPv6 Route to display the IPv6 route info. Field Destination Gateway Metric Interface Description Destination IP Address Gateway address used for destination IP Metric specified for gateway Interface used for destination IP 36 4.9 CPU & Memory Displays the system performance graphs. Shows the current loading of the CPU and memory usage with dynamic updates. Note: This graph is unavailable for Internet Explorer users. 37 4.10 Network Map The network map is a graphical representation of routers wan status and LAN devices. Note: This graph is unavailable for Internet Explorer users. 4.11 Wireless 4.11.1 Station Info This page shows authenticated wireless stations and their status. Click the Refresh button to update the list of stations in the WLAN. 38 Consult the table below for descriptions of each column heading. Field MAC Associated Description Lists the MAC address of all the stations. Lists all the stations that are associated with the Access Point, along with the amount of time since packets were transferred to and from each station. If a station is idle for too long, it is removed from this list. Lists those devices with authorized access. Lists which SSID of the modem that the stations connect to. Lists which interface of the modem that the stations connect to. Authorized SSID Interface 39 4.11.2 Site Survey The graph displays wireless APs found in your neighborhood by channel. 5GHz 40 2.4GHz 41 Chapter 5 Basic Setup You can reach this page by clicking on the following icon located at the top of the screen. This will bring you to the following screen. 42 5.1 Wan Setup Add or remove ATM, PTM and ETH WAN interface connections here. Click Add to create a new Layer 2 Interface (see Appendix F - Connection Setup). NOTE: Up to 8 ATM interfaces can be created and saved in flash memory. To remove a connection, click the Remove button. 43 5.1.1 WAN Service Setup This screen allows for the configuration of WAN interfaces. Click the Add button to create a new connection. For connections on ATM or PTM or ETH WAN interfaces see Appendix F - Connection Setup. To remove a connection, select its Remove column radio button and click Remove. Heading Interface Description Type Vlan8021p VlanMuxId VlanTpid IGMP Proxy Description Name of the interface for WAN Name of the WAN connection Shows the connection type VLAN ID is used for VLAN Tagging (IEEE 802.1Q) Shows 802.1Q VLAN ID VLAN Tag Protocol Identifier Shows Internet Group Management Protocol (IGMP) Proxy status Shows the status of WAN interface used as IGMP source Shows Network Address Translation (NAT) status Shows the Security status Shows the WAN IPv6 address Shows Multicast Listener Discovery (MLD) Proxy status Shows the status of WAN interface used as MLD source Select interfaces to remove Click the Edit button to make changes to the WAN interface. IGMP Source NAT Firewall IPv6 MLD Proxy Mld Source Remove Edit To remove a connection, select its Remove column radio button and click Remove. NOTE: Up to 16 PVC profiles can be configured and saved in flash memory. 44 5.2 NAT For NAT features under this section to work, NAT must be enabled in at least one PVC. 5.2.1 Virtual Servers Virtual Servers allow you to direct incoming traffic from the WAN side (identified by Protocol and External port) to the internal server with private IP addresses on the LAN side. The Internal port is required only if the external port needs to be converted to a different port number used by the server on the LAN side. A maximum of 32 entries can be configured. To add a Virtual Server, click Add. The following will be displayed. Click Apply/Save to apply and save the settings. 45 Consult the table below for field and header descriptions. Field/Header Choose All Interface Description Virtual server rules will be created for all WAN interfaces. Select a WAN interface from the drop-down menu. Choose One Interface Use Interface Select a Service Or Custom Service Server IP Address Enable NAT Loopback Allows local machines to access virtual server via WAN IP User should select the service from the list. Or User can enter the name of their choice. Enter the IP address for the server. External Port Start External Port End Protocol Internal Port Start Internal Port End Address Enter the starting external port number (when you select Custom Server). When a service is selected, the port ranges are automatically configured. Enter the ending external port number (when you select Custom Server). When a service is selected, the port ranges are automatically configured. TCP, TCP/UDP, or UDP. Enter the internal port starting number (when you select Custom Server). When a service is selected the port ranges are automatically configured Enter the internal port ending number (when you select Custom Server). When a service is selected, the port ranges are automatically configured. 46 5.2.2 Port Triggering Some applications require that specific ports in the firewall be opened for access by the remote parties. Port Triggers dynamically 'Open Ports' in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
'Triggering Ports'. The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using the 'Open Ports'. A maximum 32 entries can be configured. To add a Trigger Port, click Add. The following will be displayed. Click Save/Apply to save and apply the settings. Consult the table below for field and header descriptions. 47 Field/Header Use Interface Select an Application Or Custom Application Trigger Port Start Trigger Port End Trigger Protocol Open Port Start Open Port End Open Protocol Description Select a WAN interface from the drop-down menu. User should select the application from the list. Or User can enter the name of their choice. Enter the starting trigger port number (when you select custom application). When an application is selected, the port ranges are automatically configured. Enter the ending trigger port number (when you select custom application). When an application is selected, the port ranges are automatically configured. TCP, TCP/UDP, or UDP. Enter the starting open port number (when you select custom application). When an application is selected, the port ranges are automatically configured. Enter the ending open port number (when you select custom application). When an application is selected, the port ranges are automatically configured. TCP, TCP/UDP, or UDP. 48 5.2.3 DMZ Host The DSL router will forward IP packets from the WAN that do not belong to any of the applications configured in the Virtual Servers table to the DMZ host computer. To Activate the DMZ host, enter the DMZ host IP address and click Save/Apply. To Deactivate the DMZ host, clear the IP address field and click Save/Apply. Enable NAT Loopback allows PC on the LAN side to access servers in the LAN network via the routers WAN IP. 49 5.2.4 IP Address Map Mapping Local IP (LAN IP) to some specified Public IP (WAN IP). Field/Header Rule Type Local Start IP Local End IP Public Start IP Public End IP Remove Description The number of the rule Mapping type from local to public The beginning of the local IP The ending of the local IP The beginning of the public IP The ending of the public IP Remove this rule Click the Add button to display the following. Select a Service, then click the Save/Apply button. One to One: mapping one local IP to a specific public IP Many to one: mapping a range of local IP to a specific public IP Many to many(Overload): mapping a range of local IP to a different range of public IP Many to many(No Overload): mapping a range of local IP to a same range of public IP 50 5.2.5 ALG/Pass-Through Support ALG Pass-through for the listed protocols. To allow/deny the corresponding ALG protocol, select Enable / Disable and then click the Save button. After reboot, the protocol will be added/removed from the system module. 51 5.3 LAN Configure the LAN interface settings and then click Apply/Save. Consult the field descriptions below for more details. GroupName: Select an Interface Group. 1st LAN INTERFACE IP Address: Enter the IP address for the LAN port. Subnet Mask: Enter the subnet mask for the LAN port. 52 Enable IGMP Snooping:
Standard Mode: In standard mode, multicast traffic will flood to all bridge ports when no client subscribes to a multicast group even if IGMP snooping is enabled. Blocking Mode: In blocking mode, the multicast data traffic will be blocked and not flood to all bridge ports when there are no client subscriptions to any multicast group. Enable IGMP LAN to LAN Multicast: Select Enable from the drop-down menu to allow IGMP LAN to LAN Multicast forwarding Enable Enhanced IGMP: Enable by ticking the checkbox (cid:59). IGMP packets between LAN ports will be blocked. Enable LAN side firewall: Enable by ticking the checkbox (cid:59). DHCP Server: To enable DHCP, select Enable DHCP server and enter Start and End IP addresses and the Leased Time. This setting configures the router to automatically assign IP, default gateway and DNS server addresses to every PC on your LAN. Setting TFTP Server: Enable by ticking the checkbox (cid:59). Then, input the TFTP server address or an IP address. Static IP Lease List: A maximum of 32 entries can be configured. To add an entry, enter MAC address and Static IP address and then click Apply/Save. To remove an entry, tick the corresponding checkbox (cid:59) in the Remove column and then click the Remove Entries button, as shown below. 53 Select Enable DHCP Server Relay (not available if NAT enabled), and enter the DHCP Server IP Address. This allows the Router to relay the DHCP packets to the remote DHCP server. The remote DHCP server will provide the IP address. 2ND LAN INTERFACE To configure a secondary IP address, tick the checkbox (cid:59) outlined (in RED) below. IP Address: Enter the secondary IP address for the LAN port. Subnet Mask: Enter the secondary subnet mask for the LAN port. Ethernet Media Type:
Configure auto negotiation, or enforce selected speed and duplex mode for the Ethernet ports. 54 5.3.1 LAN IPv6 Autoconfig Configure the LAN interface settings and then click Save/Apply. Consult the field descriptions below for more details. 55 LAN IPv6 Link-Local Address Configuration Heading EUI-64 Description Use EUI-64 algorithm to calculate link-local address from MAC address Use the Interface Identifier field to define a link-local address User Setting Static LAN IPv6 Address Configuration Heading Interface Address
(prefix length is required):
Description Configure static LAN IPv6 address and subnet prefix length IPv6 LAN Applications Heading Stateless Refresh Time (sec):
Description Use stateless configuration The information refresh time option specifies how long a client should wait before refreshing information retrieved from DHCPv6 Use stateful configuration Start of interface ID to be assigned to dhcpv6 client End of interface ID to be assigned to dhcpv6 client Lease time for dhcpv6 client to use the assigned IP address Stateful Start interface ID:
End interface ID:
Leased Time (hour):
Static IP Lease List: A maximum of 32 entries can be configured. To add an entry, enter MAC address and Interface ID and then click Apply/Save. 56 To remove an entry, tick the corresponding checkbox (cid:59) in the Remove column and then click the Remove Entries button, as shown below. Heading Enable RADVD RA interval Min(sec):
RA interval Max(sec):
Reachable Time(ms):
Default Preference:
MTU (bytes):
Enable Prefix Length Relay Enable Configuration Mode Description Enable use of router advertisement daemon Minimum time to send router advertisement Maximum time to send router advertisement The time, in milliseconds that a neighbor is reachable after receiving reachability confirmation Preference level associated with the default router MTU value used in router advertisement messages to insure that all nodes on a link use the same MTU value Use prefix length receive from WAN interface Manually configure prefix, prefix length, preferred lifetime and valid lifetime used in router advertisement Enable ULA Prefix Advertisement Allow RADVD to advertise Unique Local Address Randomly Generate Statically Configure Prefix Preferred Life Time (hour) Valid Life Time (hour) Enable MLD Snooping Standard Mode Blocking Mode Prefix Use a Randomly Generated Prefix Specify the prefix to be used The preferred life time for this prefix The valid life time for this prefix Enable/disable IPv6 multicast forward to LAN ports In standard mode, IPv6 multicast traffic will flood to all bridge ports when no client subscribes to a multicast group even if MLD snooping is enabled In blocking mode, IPv6 multicast data traffic will be blocked and not flood to all bridge ports when there are no client subscriptions to any multicast group Enable MLD LAN To LAN Multicast Enable/disable IPv6 multicast between LAN ports 57 5.3.2 Static IP Neighbor This page is used to configure a static IPv4 or IPv6 Neighbor entry. Static ARP entries will be created for these neighbor devices. Click the Add button to display the following. Click Apply/Save to apply and save the settings. Heading IP Version IP Address MAC Address Associated Interface Description The IP version used for the neighbor device Define the IP Address for the neighbor device The MAC Address of the neighbor device The interface where the neighbor device is located 58 5.3.3 UPnP Select the checkbox (cid:59) provided and click Apply/Save to enable UPnP protocol. 59 5.4 Wireless 5.4.1 Basic 5GHz The Basic option allows you to configure basic features of the wireless LAN interface. Among other things, you can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and configure the channel setting for the wireless LAN interface. Click the Apply/Save button to apply the selected wireless options. Consult the table below for descriptions of these options. Option Enable Wireless Enable Wireless Hotspot2.0 Description A checkbox (cid:59) that enables or disables the wireless LAN interface. When selected, a set of basic wireless options will appear. Enable Wireless Hotspot 2.0 (Wi-Fi Certified Passpoint) on the wireless interface. 60 Option Hide Access Point Clients Isolation Disable WMM Advertise Enable Wireless Multicast Forwarding SSID
[1-32 characters]
BSSID Country Country RegRev Max Clients Wireless -
Guest /
Virtual Access Points Description Select Hide Access Point to protect the access point from detection by wireless active scans. If the access point is hidden, it will not be listed or listed with empty SSID in the scan result of wireless stations. To connect a client to a hidden access point, the station must add the access point manually to its wireless configuration. When enabled, it prevents client PCs from seeing one another in My Network Places or Network Neighborhood. Also, prevents one wireless client communicating with another wireless client. Stops the router from advertising its Wireless Multimedia (WMM) functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video). Select the checkbox (cid:59) to enable this function. Sets the wireless network name. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access. The BSSID is a 48-bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point); and in Independent BSS or ad hoc networks, the BSSID is generated randomly. A drop-down menu that permits worldwide and specific national settings. Local regulations limit channel range:
US= worldwide, Japan=1-14, Jordan= 10-13, Israel= 1-13 Wireless country code for transmit power limit. The maximum number of clients that can access the router. This router supports multiple SSIDs called Guest SSIDs or Virtual Access Points. To enable one or more Guest SSIDs select the checkboxes (cid:59) in the Enabled column. To hide a Guest SSID, select its checkbox (cid:59) in the Hidden column. Do the same for Isolate Clients and Disable WMM Advertise. For a description of these two functions, see the previous entries for Clients Isolation and Disable WMM Advertise. Similarly, for Enable WMF, Max Clients and BSSID, consult the matching entries in this table. NOTE: Remote wireless hosts cannot scan Guest SSIDs. 61 5.4.2 Security 5GHz The following screen appears when Wireless Security is selected. The options shown here allow you to configure security features of the wireless LAN interface. Click Apply/Save to implement new configuration settings. Please see 6.12.3 for WPS setup instructions. WIRELESS SECURITY Setup requires that the user configure these settings using the Web User Interface
(see the table below). Select SSID Select the wireless network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that client will not be granted access. Network Authentication This option specifies whether a network key is used for authentication to the wireless network. If network authentication is set to Open, then no authentication is provided. Despite this, the identity of the client is still verified. 62 Each authentication type has its own settings. For example, selecting 802.1X authentication will reveal the RADIUS Server IP address, Port and Key fields. WEP Encryption will also be enabled as shown below. The settings for WPA2-PSK authentication are shown next. WEP Encryption This option specifies whether data sent over the network is encrypted. The same network key is used for data encryption and network authentication. Four network keys can be defined although only one can be used at any one time. Use the Current Network Key list box to select the appropriate network key. Security options include authentication and encryption services based on the wired equivalent privacy (WEP) algorithm. WEP is a set of security services used to protect 802.11 networks from unauthorized access, such as eavesdropping; in this case, the capture of wireless network traffic. When data encryption is enabled, secret shared encryption keys are generated and used by the source station and the destination station to alter frame bits, thus avoiding disclosure to eavesdroppers. 63 Under shared key authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Encryption Strength This drop-down list box will display when WEP Encryption is enabled. The key strength is proportional to the number of binary bits comprising the key. This means that keys with a greater number of bits have a greater degree of security and are considerably more difficult to crack. Encryption strength can be set to either 64-bit or 128-bit. A 64-bit key is equivalent to 5 ASCII characters or 10 hexadecimal numbers. A 128-bit key contains 13 ASCII characters or 26 hexadecimal numbers. Each key contains a 24-bit header (an initiation vector) which enables parallel decoding of multiple streams of encrypted data. Please see 6.12 for MAC Filter, Wireless Bridge and Advanced Wireless features. 64 5.4.3 Basic 2.4GHz The Basic option allows you to configure basic features of the wireless LAN interface. Among other things, you can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Click the Apply/Save button to apply the selected wireless options. Consult the table below for descriptions of these options. Option Enable Wireless Enable Wireless Hotspot2.0 Description A checkbox (cid:59) that enables or disables the wireless LAN interface. When selected, a set of basic wireless options will appear. Enable Wireless Hotspot 2.0 (Wi-Fi Certified Passpoint) on the wireless interface. 65 Option Hide Access Point Clients Isolation Disable WMM Advertise Enable Wireless Multicast Forwarding SSID
[1-32 characters]
BSSID Country Country RegRev Max Clients Wireless -
Guest /
Virtual Access Points Description Select Hide Access Point to protect the access point from detection by wireless active scans. If the access point is hidden, it will not be listed or listed with empty SSID in the scan result of wireless stations. To connect a client to a hidden access point, the station must add the access point manually to its wireless configuration. When enabled, it prevents client PCs from seeing one another in My Network Places or Network Neighborhood. Also, prevents one wireless client communicating with another wireless client. Stops the router from advertising its Wireless Multimedia (WMM) functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video). Select the checkbox (cid:59) to enable this function. Sets the wireless network name. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access. The BSSID is a 48-bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point); and in Independent BSS or ad hoc networks, the BSSID is generated randomly. A drop-down menu that permits worldwide and specific national settings. Local regulations limit channel range:
US= worldwide, Japan=1-14, Jordan= 10-13, Israel= 1-13 Wireless country code for transmit power limit. The maximum number of clients that can access the router. This router supports multiple SSIDs called Guest SSIDs or Virtual Access Points. To enable one or more Guest SSIDs select the checkboxes (cid:59) in the Enabled column. To hide a Guest SSID, select its checkbox (cid:59) in the Hidden column. Do the same for Isolate Clients and Disable WMM Advertise. For a description of these two functions, see the previous entries for Clients Isolation and Disable WMM Advertise. Similarly, for Enable WMF, Max Clients and BSSID, consult the matching entries in this table. NOTE: Remote wireless hosts cannot scan Guest SSIDs. 66 5.4.4 Security 2.4GHz The following screen appears when Wireless Security is selected. The options shown here allow you to configure security features of the wireless LAN interface. Click Apply/Save to implement new configuration settings. Please see 6.12.9 for WPS setup instructions. WIRELESS SECURITY Setup requires that the user configure these settings using the Web User Interface
(see the table below). Select SSID Select the wireless network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that client will not be granted access. Network Authentication This option specifies whether a network key is used for authentication to the wireless network. If network authentication is set to Open, then no authentication is provided. Despite this, the identity of the client is still verified. 67 Each authentication type has its own settings. For example, selecting 802.1X authentication will reveal the RADIUS Server IP address, Port and Key fields. WEP Encryption will also be enabled as shown below. The settings for WPA2-PSK authentication are shown next. WEP Encryption This option specifies whether data sent over the network is encrypted. The same network key is used for data encryption and network authentication. Four network keys can be defined although only one can be used at any one time. Use the Current Network Key list box to select the appropriate network key. Security options include authentication and encryption services based on the wired equivalent privacy (WEP) algorithm. WEP is a set of security services used to protect 802.11 networks from unauthorized access, such as eavesdropping; in this case, the capture of wireless network traffic. When data encryption is enabled, secret shared encryption keys are generated and used by the source station and the destination station to alter frame bits, thus avoiding disclosure to eavesdroppers. 68 Under shared key authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Encryption Strength This drop-down list box will display when WEP Encryption is enabled. The key strength is proportional to the number of binary bits comprising the key. This means that keys with a greater number of bits have a greater degree of security and are considerably more difficult to crack. Encryption strength can be set to either 64-bit or 128-bit. A 64-bit key is equivalent to 5 ASCII characters or 10 hexadecimal numbers. A 128-bit key contains 13 ASCII characters or 26 hexadecimal numbers. Each key contains a 24-bit header (an initiation vector) which enables parallel decoding of multiple streams of encrypted data. Please see 6.12 for MAC Filter, Wireless Bridge and Advanced Wireless features. 69 5.5 Parental Control This selection provides WAN access control functionality. 5.5.1 Time Restriction This feature restricts access from a LAN device to an outside network through the device on selected days at certain times. Make sure to activate the Internet Time server synchronization as described in section 8.5 Internet Time, so that the scheduled times match your local time. Clicking on the checkbox in the Enable field allows the user to select all / none entries for Enabling/Disabling. Click Add to display the following screen. See below for field descriptions. Click Apply/Save to add a time restriction. User Name: A user-defined label for this restriction. Browser's MAC Address: MAC address of the PC running the browser. Other MAC Address: MAC address of another LAN device. Days of the Week: The days the restrictions apply. Start Blocking Time: The time the restrictions start. End Blocking Time: The time the restrictions end. 70 5.5.2 URL Filter This screen allows for the creation of a filter rule for access rights to websites based on their URL address and port number. Select URL List Type: Exclude or Include. Tick the Exclude radio button to deny access to the websites listed. Tick the Include radio button to restrict access to only those listed websites. Then click Add to display the following screen. Enter the URL address and port number then click Apply/Save to add the entry to the URL filter. URL Addresses begin with www, as shown in this example. 71 A maximum of 100 entries can be added to the URL Filter list. 72 5.6 Home networking 5.6.1 Print Server This page allows you to enable or disable printer support. Please reference Appendix E to see the procedure for enabling the Printer Server. 5.6.2 DLNA Enabling DLNA allows users to share digital media, like pictures, music and video, to other LAN devices from the digital media server. Insert the USB drive into the USB host port on the back of the router. Click Enable on-board digital media server, a dropdown list of directories found on the USB driver will be available for selection. Select media path from the drop-down list or manually modify the media library path and click Apply/Save to enable the DLNA media server. 73 5.6.3 Storage Service Enabling Samba service allows the user to share files on the storage device. Different levels of user access can be configured after samba security mode is enabled. This page also displays storage devices attached to the USB host. Display after storage device attached (for your reference). 74 5.6.4 USB Speed This page allows you to enable / disable USB 3.0 device support. Note: Enabling USB 3.0 can cause interference with the built-in 2.4GHz wireless radio. It is advised leaving the default value as USB 2.0 75 Chapter 6 Advanced Setup You can reach this page by clicking on the following icon located at the top of the screen. 6.1 Auto-detection setup The auto-detection function is used for CPE to detect WAN service for either ETHWAN or xDSL interfaces. The feature is designed for the scenario that requires only one WAN service in different applications. The Auto Detection page simply provides a checkbox allowing users to enable or disable the feature. Check the checkbox to display the following configuration options. 76 Enter the PPP username/password given by your service provider for PPP service detection. Select a LAN-as-WAN Ethernet port for auto-detect:
Select the Ethernet Port that will be used as ETH WAN during auto-detection. For models with ETH WAN port, only ETH WAN port is available to be used as WAN port. 77 WAN services list for ATM mode: A maximum of 7 WAN services with corresponding PVC are required to be configured for ADSL ATM mode. The services will be detected in order. Users can modify the 7 pre-configured services and select disable to ignore any of those services to meet their own requirement and also reduce the detection cycle. WAN services list for PTM mode: A maximum of 7 WAN services with corresponding VLAN ID (-1 indicates no VLAN ID is required for the service) are required to be configured for ADSL/VDSL PTM mode and ETHWAN. The services will be detected in order. Users can modify the 7 pre-configured services and select disable to ignore any of the services to meet their own requirements and also reduce the detection cycle. 78 Click "Apply/Save" to activate the auto-detect function. Options for each WAN service: These options are selectable for each WAN service. Users can pre-configure both WAN services and other provided settings to meet their deployed requirements. Auto Detection status and Restart The Auto-detection status is used to display the real time status of the Auto-detection feature. The Restart button is used to detect all the WAN services that are either detected by the auto-detection feature or configured manually by users. The following window will pop up upon clicking the Restart button. Click the OK button to proceed. 79 Auto Detection notice Note: The following description concerning ETHWAN is for multiple LAN port devices only. 1) This feature will automatically detect one WAN service only. If customers require multiple WAN services, manual configuration is required. 2) If a physical ETHWAN port is detected, the Auto Detection for ETHWAN will be fixed on the physical ETHWAN port and cannot be configured for any LAN port;
if the physical ETHWAN port is not detected, the Auto Detection for ETHWAN will be configured to the 4th LAN port by default and allows it to be configured for any LAN port as well. 3) For cases in which both the DSL port and ETHWAN port are plugged in at the same time, the DSL WAN will have priority over ETHWAN. For example, the ETHWAN port is plugged in with a WAN service detected automatically and then the DSL port is plugged in and linked up. The Auto Detection feature will clear the WAN service for ETHWAN and re-detect the WAN service for DSL port. 4) If none of the pre-configured services are detected, a Bridge service will be created. 80 6.2 Security For detailed descriptions, with examples, please consult Appendix A - Firewall. 6.2.1 IP Filtering This screen sets filter rules that limit IP traffic (Outgoing/Incoming). Multiple filter rules can be set and each applies at least one limiting condition. For individual IP packets to pass the filter all conditions must be fulfilled. NOTE:
This function is not available when in bridge mode. Instead, MAC Filtering performs a similar function. OUTGOING IP FILTER By default, all outgoing IP traffic is allowed, but IP traffic can be blocked with filters. To add a filter (to block some outgoing IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions. 81 Field Filter Name IP Version Protocol Source IP address Source Port (port or port:port) Destination IP address Destination Port (port or port:port) Enter destination port number or range. Description The filter rule label. Select from the drop down menu. TCP, TCP/UDP, UDP, or ICMP. Enter source IP address. Enter source port number or range. Enter destination IP address. INCOMING IP FILTER By default, all incoming IP traffic is blocked, but IP traffic can be allowed with filters. To add a filter (to allow incoming IP traffic), click the Add button. On the following screen, enter your filter criteria and then click Apply/Save. Consult the table below for field descriptions. 82 Field Filter Name IP Version Protocol Policy Description The filter rule label. Select from the drop down menu. TCP, TCP/UDP, UDP, or ICMP. Permit/Drop packets specified by the firewall rule. Enter source IP address. Enter source port number or range. Enter destination IP address. Source IP address Source Port (port or port:port) Destination IP address Destination Port (port or port:port) Enter destination port number or range. At the bottom of this screen, select the WAN and LAN Interfaces to which the filter rule will apply. You may select all or just a subset. WAN interfaces in bridge mode or without firewall enabled are not available. 83 Denial of Service Denial of Services currently provides Syn-flood protection, furtive port scanner protection and Ping of death protection. This web page allows you to activate/de-activate them and to set the maximum average limit (packet per second) and the maximum burst (packet amount) for each protection. Click the Apply/Save button to save and (de)activate the protection. 84 6.2.2 MAC Filtering NOTE:
This option is only available in bridge mode. Other modes use IP Filtering to perform a similar function. Each network device has a unique 48-bit MAC address. This can be used to filter
(block or forward) packets based on the originating device. MAC filtering policy and rules for the VR-3060 can be set according to the following procedure. The MAC Filtering Global Policy is defined as follows. FORWARDED means that all MAC layer frames will be FORWARDED except those matching the MAC filter rules. BLOCKED means that all MAC layer frames will be BLOCKED except those matching the MAC filter rules. The default MAC Filtering Global policy is FORWARDED. It can be changed by clicking the Change Policy button. Choose Add or Remove to configure MAC filtering rules. The following screen will appear when you click Add. Create a filter to identify the MAC layer frames by specifying at least one condition below. If multiple conditions are specified, all of them must be met. 85 Click Save/Apply to save and activate the filter rule. Consult the table below for detailed field descriptions. Field Protocol Type Destination MAC Address Defines the destination MAC address Source MAC Address Frame Direction WAN Interfaces Defines the source MAC address Select the incoming/outgoing packet interface Applies the filter to the selected bridge interface Description PPPoE, IPv4, IPv6, AppleTalk, IPX, NetBEUI, IGMP 86 6.3 Quality of Service (QoS) NOTE: QoS must be enabled in at least one PVC to display this option.
(See Appendix F - Connection Setup for detailed PVC setup instructions). To Enable QoS tick the checkbox Click Apply/Save to activate QoS. and select a Default DSCP Mark. QoS and DSCP Mark are defined as follows:
Quality of Service (QoS): This provides different priority to different users or data flows, or guarantees a certain level of performance to a data flow in accordance with requests from Queue Prioritization. Default Differentiated Services Code Point (DSCP) Mark: This specifies the per hop behavior for a given flow of packets in the Internet Protocol (IP) header that do not match any other QoS rule. 87 6.3.1 QoS Queue 6.3.1.1 QoS Queue Configuration Configure queues with different priorities to be used for QoS setup. In ATM mode, a maximum of 16 queues can be configured. In PTM mode, a maximum of 8 queues can be configured. For each Ethernet interface, a maximum of 8 queues can be configured. For each Ethernet interface, a maximum of 8 queues can be configured.
(Please see the screen on the following page). 88 89 To remove queues, check their remove-checkboxes (for user created queues), then click the Remove button. The Enable button will scan through every queue in the table. Queues with the enable-checkbox checked will be enabled. Queues with the enable-checkbox un-checked will be disabled. The enable-checkbox also shows status of the queue after page reload. Note that if WMM function is disabled in the Wireless Page, queues related to wireless will not take effect. This function follows the Differentiated Services rule of IP QoS. You can create a new Queue entry by clicking the Add button. Enable and assign an interface and precedence on the next screen. Click Save/Reboot on this screen to activate it. Click Add to display the following screen. Name: Identifier for this Queue entry. Enable: Enable/Disable the Queue entry. Interface: Assign the entry to a specific network interface (QoS enabled). After selecting an Interface the following will be displayed. 90 The precedence list shows the scheduler algorithm for each precedence level. Queues of equal precedence will be scheduled based on the algorithm. Queues of unequal precedence will be scheduled based on SP. Shaping Rate: Specify a shaping rate limit to the defined queue. Click Apply/Save to apply and save the settings. 91 6.3.1.2 Wlan Queue Displays the list of available wireless queues for WMM and wireless data transmit priority. 92 6.3.2 QoS Classification The network traffic classes are listed in the following table. Click Add to configure a network traffic class rule and Enable to activate it. To delete an entry from the list, click Remove. This screen creates a traffic class rule to classify the upstream traffic, assign queuing priority and optionally overwrite the IP header DSCP byte. A rule consists of a class name and at least one logical condition. All the conditions specified in the rule must be satisfied for it to take effect. Click Apply/Save to save and activate the rule. 93 Field Traffic Class Name Rule Order Rule Status Classification Criteria Ingress Interface Ether Type Source MAC Address Source MAC Mask Destination MAC Address Description Enter a name for the traffic class. Last is the only option. Disable or enable the rule. Select an interface: (i.e. LAN, WAN, local, ETH1, ETH2, ETH3, wl0) Set the Ethernet type (e.g. IP, ARP, IPv6). A packet belongs to SET-1, if a binary-AND of its source MAC address with the Source MAC Mask is equal to the binary-AND of the Source MAC Mask and this field. This is the mask used to decide how many bits are checked in Source MAC Address. A packet belongs to SET-1 then the result that the Destination MAC Address of its header binary-AND to the Destination MAC Mask must equal to the result that this field binary-AND to the Destination MAC Mask. Destination MAC Mask This is the mask used to decide how many bits are checked in the Destination MAC Address. Classification Results Specify Egress Interface Specify Egress Queue Choose the egress queue from the list of available for the Choose the egress interface from the available list. Mark Differentiated Service Code Point Mark 802.1p Priority Set Rate Limit specified egress interface. The selected Code Point gives the corresponding priority to packets that satisfy the rule. Select between 0-7.
- Class non-vlan packets egress to a non-vlan interface will be tagged with VID 0 and the class rule p-bits.
- Class vlan packets egress to a non-vlan interface will have the packet p-bits re-marked by the class rule p-bits. No additional vlan tag is added.
- Class non-vlan packets egress to a vlan interface will be tagged with the interface VID and the class rule p-bits.
- Class vlan packets egress to a vlan interface will be additionally tagged with the packet VID, and the class rule p-bits. The data transmission rate limit in kbps. 94 6.3.3 QoS Port Shaping QoS port shaping supports traffic shaping of the Ethernet interface. Input the shaping rate and burst size to enforce QoS rule on each interface. If "Shaping Rate" is set to "-1", it means no shaping and "Burst Size" will be ignored. Click Apply/Save to apply and save the settings. 95 6.4 Routing The following routing functions are accessed from this menu:
Default Gateway, Static Route, Policy Routing and RIP. NOTE:
In bridge mode, the RIP menu option is hidden while the other menu options are shown but ineffective. 6.4.1 Default Gateway The default gateway interface list can have multiple WAN interfaces served as system default gateways but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Click Apply/Save to apply and save the settings. 96 6.4.2 Static Route This option allows for the configuration of static routes by destination IP. Click Add to create a static route or click Remove to delete a static route. After clicking Add the following will display.
(cid:32) IP Version: Select the IP version to be IPv4 or IPv6.
(cid:32) Destination IP address/prefix length: Enter the destination IP address.
(cid:32) Interface: Select the proper interface for the rule.
(cid:32) Gateway IP Address: The next-hop IP address.
(cid:32) Metric: The metric value of routing. After completing the settings, click Apply/Save to add the entry to the routing table. 97 6.4.3 Policy Routing This option allows for the configuration of static routes by policy. Click Add to create a routing policy or Remove to delete one. On the following screen, complete the form and click Apply/Save to create a policy. Field Policy Name Physical LAN Port Source IP Use Interface Default Gateway IP Description Name of the route policy Specify the port to use this route policy IP Address to be routed Interface that traffic will be directed to IP Address of the default gateway 98 6.4.4 RIP To activate RIP, configure the RIP version/operation mode and select the Enabled checkbox (cid:59) for at least one WAN interface before clicking Save/Apply. 99 6.5 DNS 6.5.1 DNS Server Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. DNS Server Interfaces can have multiple WAN interfaces served as system DNS servers but only one will be used according to the priority with the first being the highest and the last one the lowest priority if the WAN interface is connected. Priority order can be changed by removing all and adding them back in again. Click Apply/Save to save the new configuration. 100 6.5.2 Dynamic DNS The Dynamic DNS service allows you to map a dynamic IP address to a static hostname in any of many domains, allowing the VR-3060 to be more easily accessed from various locations on the Internet. To add a dynamic DNS service, click Add. The following screen will display. Click Apply/Save to save your settings. Consult the table below for field descriptions. Field D-DNS provider Hostname Interface Username Password Description Select a dynamic DNS provider from the list Enter the name of the dynamic DNS server Select the interface from the list Enter the username of the dynamic DNS server Enter the password of the dynamic DNS server 101 6.5.3 DNS Entries The DNS Entry page allows you to add domain name and IP address pairs desired to be resolved by the DSL router. Choose Add or Remove to configure a DNS Entry. The entries will become active after save/reboot. Enter the domain name and IP address that needs to be resolved locally, and click the Add Entry button. 102 6.5.4 DNS Proxy/Relay DNS proxy receives DNS queries and forwards DNS queries to the Internet. After the CPE gets answers from the DNS server, it replies to the LAN clients. Configure DNS proxy with the default setting, when the PC gets an IP via DHCP, the domain name, Home, will be added to PCs DNS Suffix Search List, and the PC can access route with Comtrend.Home. Click Apply/Save to apply and save the settings. 103 6.6 DSL The DSL Settings screen allows for the selection of DSL modulation modes. For optimum performance, the modes selected should match those of your ISP. DSL Mode G.Dmt G.lite T1.413 ADSL2 AnnexL ADSL2+
AnnexM VDSL2 Upstream: 1.3 Mbps Upstream: 0.5 Mbps Upstream: 1.0 Mbps Upstream: 1.0 Mbps Data Transmission Rate - Mbps (Megabits per second) Downstream: 12 Mbps Downstream: 4 Mbps Downstream: 8 Mbps Downstream: 12 Mbps Supports longer loops but with reduced transmission rates Downstream: 24 Mbps Downstream: 24 Mbps Downstream: 100 Mbps Upstream: 1.0 Mbps Upstream: 3.5 Mbps Upstream: 60 Mbps 104 VDSL Profile 8a 8b 8c 8d 12a 12b 17a 30a Options US0 Bitswap Enable SRA Enable G997.1 EOC xTU-R Serial Number Maximum Downstream Throughput- Mbps (Megabits per second) Downstream 50 Downstream 50 Downstream: 50 Downstream: 50 Downstream: 68 Downstream: 68 Downstream: 100 Downstream: 100 Mbps Upstream: 100 Mbps Description Band between 20 and 138 kHz for long loops to upstream Enables adaptive handshaking functionality Enables Seamless Rate Adaptation (SRA) Select Equipment Serial Number or Equipment MAC Address to use routers serial number or MAC address in ADSL EOC messages 105 6.7 Interface Grouping Interface Grouping supports multiple ports to PVC and bridging groups. Each group performs as an independent network. To use this feature, you must create mapping groups with appropriate LAN and WAN interfaces using the Add button. The Remove button removes mapping groups, returning the ungrouped interfaces to the Default group. Only the default group has an IP interface. To add an Interface Group, click the Add button. The following screen will appear. It lists the available and grouped interfaces. Follow the instructions shown onscreen. 106 Automatically Add Clients With Following DHCP Vendor IDs:
Add support to automatically map LAN interfaces to PVC's using DHCP vendor ID
(option 60). The local DHCP server will decline and send the requests to a remote DHCP server by mapping the appropriate LAN interface. This will be turned on when Interface Grouping is enabled. For example, imagine there are 4 PVCs (0/33, 0/36, 0/37, 0/38). VPI/VCI=0/33 is for PPPoE while the other PVCs are for IP set-top box (video). The LAN interfaces are ETH1, ETH2, ETH3, and ETH4. 107 The Interface Grouping configuration will be:
1. Default: ETH1, ETH2, ETH3, and ETH4. 2. Video: nas_0_36, nas_0_37, and nas_0_38. The DHCP vendor ID is "Video". If the onboard DHCP server is running on "Default" and the remote DHCP server is running on PVC 0/36 (i.e. for set-top box use only). LAN side clients can get IP addresses from the CPE's DHCP server and access the Internet via PPPoE (0/33). If a set-top box is connected to ETH1 and sends a DHCP request with vendor ID
"Video", the local DHCP server will forward this request to the remote DHCP server. The Interface Grouping configuration will automatically change to the following:
1. Default: ETH2, ETH3, and ETH4 2. Video: nas_0_36, nas_0_37, nas_0_38, and ETH1. 108 6.8 IP Tunnel 6.8.1 IPv6inIPv4 Configure 6in4 tunneling to encapsulate IPv6 traffic over explicitly-configured IPv4 links. Click the Add button to display the following. Click Apply/Save to apply and save the settings. Options Tunnel Name Mechanism Associated WAN Interface Associated LAN Interface Manual/Automatic Description Input a name for the tunnel Mechanism used by the tunnel deployment Select the WAN interface to be used by the tunnel Select the LAN interface to be included in the tunnel Select automatic for point-to-multipoint tunneling /
manual for point-to-point tunneling The subnet mask length used for the IPv4 interface IPv4 Mask Length 6rd Prefix with Prefix Length Prefix and prefix length used for the IPv6 interface Border Relay IPv4 Address Input the IPv4 address of the other device 109 6.8.2 IPv4inIPv6 Configure 4in6 tunneling to encapsulate IPv4 traffic over an IPv6-only environment. Click the Add button to display the following. Click Apply/Save to apply and save the settings. Options Tunnel Name Mechanism Associated WAN Interface Associated LAN Interface Manual/Automatic AFTR Description Input a name for the tunnel Mechanism used by the tunnel deployment Select the WAN interface to be used by the tunnel Select the LAN interface to be included in the tunnel Select automatic for point-to-multipoint tunneling /
manual for point-to-point tunneling Address of Address Family Translation Router 110 6.9 Certificate A certificate is a public key, attached with its owners information (company name, server name, personal real name, contact e-mail, postal address, etc) and digital signatures. There will be one or more digital signatures attached to the certificate, indicating that these entities have verified that this certificate is valid. 6.9.1 Local CREATE CERTIFICATE REQUEST Click Create Certificate Request to generate a certificate-signing request. The certificate-signing request can be submitted to the vendor/ISP/ITSP to apply for a certificate. Some information must be included in the certificate-signing request. Your vendor/ISP/ITSP will ask you to provide the information they require and to provide the information in the format they regulate. Enter the required information and click Apply to generate a private key and a certificate-signing request. The following table is provided for your reference. 111 Field Certificate Name Common Name Organization Name State/Province Name Description A user-defined name for the certificate. Usually, the fully qualified domain name for the machine. The exact legal name of your organization. Do not abbreviate. The state or province where your organization is located. It cannot be abbreviated. Country/Region Name The two-letter ISO abbreviation for your country. IMPORT CERTIFICATE Click Import Certificate to paste the certificate content and the private key provided by your vendor/ISP/ITSP into the corresponding boxes shown below. Enter a certificate name and click the Apply button to import the certificate and its private key. 112 6.9.2 Trusted CA CA is an abbreviation for Certificate Authority, which is a part of the X.509 system. It is itself a certificate, attached with the owner information of this certificate authority; but its purpose is not encryption/decryption. Its purpose is to sign and issue certificates, in order to prove that these certificates are valid. Click Import Certificate to paste the certificate content of your trusted CA. The CA certificate content will be provided by your vendor/ISP/ITSP and is used to authenticate the Auto-Configuration Server (ACS) that the CPE will connect to. Enter a certificate name and click Apply to import the CA certificate. 113 6.10 Power Management This screen allows for control of hardware modules to evaluate power consumption. Use the buttons to select the desired option, click Apply and check the response. 114 6.11 Multicast Input new IGMP or MLD protocol configuration fields if you want modify default values shown. Then click Apply/Save. Multicast Precedence:
Select precedence of multicast packets. Multicast Strict Grouping Enforcement:
Enable/Disable multicast strict grouping. Field Default Version Description Define IGMP using version with video server. 115 Field Query Interval Description The query interval is the amount of time in seconds between IGMP General Query messages sent by the router (if the router is the querier on this subnet). The default query interval is 125 seconds. Query Response Interval The query response interval is the maximum amount of time in seconds that the IGMP router waits to receive a response to a General Query message. The query response interval is the Maximum Response Time field in the IGMP v2 Host Membership Query message header. The default query response interval is 10 seconds and must be less than the query interval. The last member query interval is the amount of time in seconds that the IGMP router waits to receive a response to a Group-Specific Query message. The last member query interval is also the amount of time in seconds between successive Group-Specific Query messages. The default last member query interval is 10 seconds. The robustness variable is a way of indicating how susceptible the subnet is to lost packets. IGMP can recover from robustness variable minus 1 lost IGMP packets. The robustness variable should be set to a value of 2 or greater. The default robustness variable value is 2. Setting the maximum number of Multicast groups. Define the maximum multicast video stream number. Setting the maximum number of groups that ports can accept. When you enable IGMP fast-leave processing, the switch immediately removes a port when it detects an IGMP version 2 leave message on that port. 116 Last Member Query Interval Robustness Value Maximum Multicast Groups Maximum Multicast Data Sources (for IGMPv3) Maximum Multicast Group Members Fast Leave Enable 6.12 Wireless 6.12.1 Basic 5GHz The Basic option allows you to configure basic features of the wireless LAN interface. Among other things, you can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Click Apply/Save to configure the basic wireless options. Consult the table below for descriptions of these options. 117 Option Enable Wireless Enable Wireless Hotspot2.0 Hide Access Point Clients Isolation Disable WMM Advertise Enable Wireless Multicast Forwarding SSID
[1-32 characters]
BSSID Country Description A checkbox (cid:59) that enables or disables the wireless LAN interface. When selected, a set of basic wireless options will appear. Enable Wireless Hotspot 2.0 (Wi-Fi Certified Passpoint) on the wireless interface. Select Hide Access Point to protect the access point from detection by wireless active scans. If the access point is hidden, it will not be listed or listed with empty SSID in the scan result of wireless stations. To connect a client to a hidden access point, the station must add the access point manually to its wireless configuration. When enabled, it prevents client PCs from seeing one another in My Network Places or Network Neighborhood. Also, prevents one wireless client communicating with another wireless client. Stops the router from advertising its Wireless Multimedia (WMM) functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video). Select the checkbox (cid:59) to enable this function. Sets the wireless network name. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access. The BSSID is a 48-bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point); and in Independent BSS or ad hoc networks, the BSSID is generated randomly. A drop-down menu that permits worldwide and specific national settings. Local regulations limit channel range:
US= worldwide, Japan=1-14, Jordan= 10-13, Israel= 1-13 Wireless country code for transmit power limit. Country RegRev Max Clients The maximum number of clients that can access the router. Wireless -
Guest /
Virtual Access Points This router supports multiple SSIDs called Guest SSIDs or Virtual Access Points. To enable one or more Guest SSIDs select the checkboxes (cid:59) in the Enabled column. To hide a Guest SSID select its checkbox (cid:59) in the Hidden column. Do the same for Isolate Clients and Disable WMM Advertise. For a description of these two functions, see the previous entries for Clients Isolation and Disable WMM Advertise. Similarly, for Enable WMF, Max Clients and BSSID, consult the matching entries in this table. NOTE: Remote wireless hosts cannot scan Guest SSIDs. 118 6.12.2 Security 5GHz The following screen appears when Wireless Security is selected. The options shown here allow you to configure security features of the wireless LAN interface. Please see 6.12.3 for WPS setup instructions. Click Apply/Save to implement new configuration settings. WIRELESS SECURITY Setup requires that the user configure these settings using the Web User Interface
(see the table below). Select SSID Select the wireless network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that client will not be granted access. Network Authentication This option specifies whether a network key is used for authentication to the wireless network. If network authentication is set to Open, then no authentication is provided. Despite this, the identity of the client is still verified. Each authentication type has its own settings. For example, selecting 802.1X authentication will reveal the RADIUS Server IP address, Port and Key fields. WEP Encryption will also be enabled as shown below. 119 Different authentication type pops up different settings requests. Choosing 802.1X, enter RADIUS Server IP address, RADIUS Port, RADIUS key and Current Network Key. Also, enable WEP Encryption and select Encryption Strength. Select the Current Network Key and enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys and enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys. Choosing WPA2-PSK, you must enter WPA Pre-Shared Key and Group Rekey Interval. WEP Encryption This option specifies whether data sent over the network is encrypted. The same network key is used for data encryption and network authentication. Four network keys can be defined although only one can be used at any one time. Use the Current Network Key list box to select the appropriate network key. 120
1 2 | User Manual-2 | Users Manual | 2.67 MiB | / February 10 2016 |
Security options include authentication and encryption services based on the wired equivalent privacy (WEP) algorithm. WEP is a set of security services used to protect 802.11 networks from unauthorized access, such as eavesdropping; in this case, the capture of wireless network traffic. When data encryption is enabled, secret shared encryption keys are generated and used by the source station and the destination station to alter frame bits, thus avoiding disclosure to eavesdroppers. Under shared key authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Encryption Strength This drop-down list box will display when WEP Encryption is enabled. The key strength is proportional to the number of binary bits comprising the key. This means that keys with a greater number of bits have a greater degree of security and are considerably more difficult to crack. Encryption strength can be set to either 64-bit or 128-bit. A 64-bit key is equivalent to 5 ASCII characters or 10 hexadecimal numbers. A 128-bit key contains 13 ASCII characters or 26 hexadecimal numbers. Each key contains a 24-bit header (an initiation vector) which enables parallel decoding of multiple streams of encrypted data. 121 6.12.3 WPS 5GHz Wi-Fi Protected Setup (WPS) is an industry standard that simplifies wireless security setup for certified network devices. Every WPS certified device has both a PIN number and a push button, located on the device or accessed through device software. The VR-3060 has a 5GHz WPS button on the device. Devices with the WPS logo (shown here) support WPS. If the WPS logo is not present on your device it still may support WPS, in this case, check the device documentation for the phrase Wi-Fi Protected Setup. NOTE: WPS is only available in Open, WPA-PSK, WPA2-PSK and Mixed WPA2/WPA-PSK network authentication modes. Other authentication modes do not use WPS so they must be configured manually. To configure security settings with WPS, follow the procedures below. I. Setup Step 1: Enable WPS by selecting Enabled from the drop down list box shown. Step 2: Set the WPS AP Mode. Configured is used when the VR-3060 will assign security settings to clients. Unconfigured is used when an external client assigns security settings to the VR-3060. NOTES: Your client may or may not have the ability to provide security settings to the VR-3060. If it does not, then you must set the WPS AP mode to Configured. Consult the device documentation to check its capabilities. 122 IIa. PUSH-BUTTON CONFIGURATION The WPS push-button configuration provides a semi-automated configuration method. The WPS button on the front panel of the router can be used for this purpose. The WPS push-button configuration is described in the procedure below. It is assumed that the Wireless function is Enabled and that the router is configured as the Wireless Access Point (AP) of your WLAN. In addition, the wireless client must also be configured correctly and turned on, with WPS function enabled. NOTE: The wireless AP on the router searches for 2 minutes. If the router stops searching before you complete Step 4, return to Step 3. Step 3: Press WPS button Press the WPS button on the front panel of the router. The WPS LED will blink to show that the router has begun searching for the client. Step 4: Go to your WPS wireless client and activate the push-button function. A typical WPS client screenshot is shown below as an example. Now go to Step 7 (part III. Check Connection) to check the WPS connection. IIb. WPS PIN CONFIGURATION Using this method, security settings are configured with a personal identification number (PIN). The PIN can be found on the device itself or within the software. The PIN may be generated randomly in the latter case. To obtain a PIN number for your client, check the device documentation for specific instructions. The WPS PIN configuration is described in the procedure below. It is assumed that the Wireless function is Enabled and that the router is configured as the Wireless Access Point (AP) of your wireless LAN. In addition, the wireless client must also be configured correctly and turned on, with WPS function enabled. Step 5: Select the PIN radio button in the WSC Setup section of the Wireless Security screen, as shown in A or B below, and then click the appropriate button based on the WSC AP mode selected in step 2. A - For Configured mode, click the Add Enrollee button. 123 Enter STA PIN: a Personal Identification Number (PIN) has to be read from either a sticker or the display on the new wireless device. This PIN must then be inputted at representing the network, usually the Access Point of the network. B - For Unconfigured mode, click the Config AP button. Step 6: Activate the PIN function on the wireless client. For Configured mode, the client must be configured as an Enrollee. For Unconfigured mode, the client must be configured as the Registrar. This is different from the External Registrar function provided in Windows Vista. The figure below provides an example of a WPS client PIN function in-progress. III. CHECK CONNECTION Step 7:
If the WPS setup method was successful, you will be able access the wireless AP from the client. The client software should show the status. The example below shows that the connection established successfully. You can also double-click the Wireless Network Connection icon from the Network Connections window (or the system tray) to confirm the status of the new connection. 124 6.12.4 MAC Filter 5GHz This page is used to set allowed MAC addresses, and click the associated button for each interface to enable/disable the MAC address control. The current MAC control status is shown on the associated buttons. After clicking the Add button, the following screen appears. Enter the MAC address in the box provided and click Apply/Save. 125 6.12.5 Wireless Bridge This screen allows for the configuration of wireless bridge features of the WiFi interface. See the table below for detailed explanations of the various options. Click Apply/Save to implement new configuration settings. Feature Description Bridge Restrict Selecting Disabled disables wireless bridge restriction, which means that any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in the Remote Bridges list will be granted access. Click Refresh to update the station list when Bridge Restrict is enabled. Enter the list of MAC addresses allowed to act as wireless bridge clients. Remote Bridges MAC Address 126 6.12.6 Advanced 5GHz The Advanced screen allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used. Click Apply/Save to set new advanced wireless options. 127 Field Band Channel Auto Channel Timer
(min) 802.11n/EWC Bandwidth Control Sideband 802.11n Rate 802.11n Protection Support 802.11n Client Only RIFS Advertisement OBSS Co-Existence Description 5GHz band is used for high speed wireless network as defined in IEEE 802.11ac Drop-down menu that allows selection of a specific channel. Auto channel scan timer in minutes (0 to disable) An equipment interoperability standard setting based on IEEE 802.11n Draft 2.0 and Enhanced Wireless Consortium
(EWC) Select 20MHz or 40MHz or 80MHz bandwidth. To utilize maximum data throughput, select 80MHz band. Select Upper or Lower sideband when in 40MHz mode. Set the physical transmission rate (PHY). Turn Off for maximized throughput. Turn On for greater security. Turn Off to allow 802.11b/g clients access to the router. Turn On to prohibit 802.11b/g clients access to the router. One of several draft-n features designed to improve efficiency. Provides a shorter delay between OFDM transmissions than in802.11a or g. Co-existence between 20 MHZ AND 40 MHZ overlapping Basic Service Set (OBSS) in WLAN. RX Chain Power Save Enabling this feature turns off one of the Receive chains, RX Chain Power Save Quiet Time RX Chain Power Save PPS 54g Rate Multicast Rate Basic Rate going from 2x2 to 2x1 to save power. The number of seconds the traffic must be below the PPS value below before the Rx Chain Power Save feature activates itself. The maximum number of packets per seconds that can be processed by the WLAN interface for a duration of Quiet Time, described above, before the Rx Chain Power Save feature activates itself. Drop-down menu that specifies the following fixed rates:
Auto: Default. Uses the 11 Mbps data rate when possible but drops to lower rates when necessary. 1 Mbps, 2Mbps, 5.5Mbps, or 11Mbps fixed rates. The appropriate setting is dependent on signal strength. Setting for multicast packet transmit rate (1-54 Mbps) Setting for basic transmission rate. 128 Field Fragmentation Threshold RTS Threshold DTIM Interval Beacon Interval Global Max Clients Xpress TM Technology Regulatory Mode Pre-Network Radar Check In-Network Radar Check TPC Mitigation Description A threshold, specified in bytes, that determines whether packets will be fragmented and at what size. On an 802.11 WLAN, packets that exceed the fragmentation threshold are fragmented, i.e., split into, smaller units suitable for the circuit size. Packets smaller than the specified fragmentation threshold value are not fragmented. Enter a value between 256 and 2346. If you experience a high packet error rate, try to slightly increase your Fragmentation Threshold. The value should remain at its default setting of 2346. Setting the Fragmentation Threshold too low may result in poor performance. Request to Send, when set in bytes, specifies the packet size beyond which the WLAN Card invokes its RTS/CTS mechanism. Packets that exceed the specified RTS threshold trigger the RTS/CTS mechanism. The NIC transmits smaller packet without using RTS/CTS. The default setting of 2347 (maximum length) disables RTS Threshold. Delivery Traffic Indication Message (DTIM) is also known as Beacon Rate. The entry range is a value between 1 and 65535. A DTIM is a countdown variable that informs clients of the next window for listening to broadcast and multicast messages. When the AP has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. AP Clients hear the beacons and awaken to receive the broadcast and multicast messages. The default is 1. The amount of time between beacon transmissions in milliseconds. The default is 100 ms and the acceptable range is 1 65535. The beacon transmissions identify the presence of an access point. By default, network devices passively scan all RF channels listening for beacons coming from access points. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point). The maximum number of clients that can connect to the router. Xpress Technology is compliant with draft specifications of two planned wireless industry standards. Configure the regulatory operation mode if needed. Select 802.11h for European regulations Dynamic Frequency Selection (DFS) and Transmit Power Control (TPC) and 802.11d if operates in country domains defined in IEEE 802.11d The number of seconds to check for radar on a channel before establishing a network. Used for 802.11h only. The number of seconds to check for radar when switching to a new channel after a network has been established. Used for 802.11h only. Transmitter power control (TPC) mitigation setting. 129 Field WMM (Wi-Fi Multimedia) WMM No Acknowledgement WMM APSD Beamforming Transmission (BFR) Beamforming Reception (BFE) Description The technology maintains the priority of audio, video and voice applications in a Wi-Fi network. It allows multimedia service get higher priority. Refers to the acknowledge policy used at the MAC level. Enabling no Acknowledgement can result in more efficient throughput but higher error rates in a noisy Radio Frequency (RF) environment. This is Automatic Power Save Delivery. It saves power. Enable beamforming signal enhance for wireless transmission. Enable beamforming signal enhance for wireless reception. 130 6.12.7 Basic 2.4GHz The Basic option allows you to configure basic features of the wireless LAN interface. Among other things, you can enable or disable the wireless LAN interface, hide the network from active scans, set the wireless network name (also known as SSID) and restrict the channel set based on country requirements. Click Apply/Save to configure the basic wireless options. Consult the table below for descriptions of these options. 131 Option Enable Wireless Enable Wireless Hotspot2.0 Hide Access Point Clients Isolation Disable WMM Advertise Enable Wireless Multicast Forwarding SSID
[1-32 characters]
BSSID Country Description A checkbox (cid:59) that enables or disables the wireless LAN interface. When selected, a set of basic wireless options will appear. Enable Wireless Hotspot 2.0 (Wi-Fi Certified Passpoint) on the wireless interface. Select Hide Access Point to protect the access point from detection by wireless active scans. If the access point is hidden, it will not be listed or listed with empty SSID in the scan result of wireless stations. To connect a client to a hidden access point, the station must add the access point manually to its wireless configuration. When enabled, it prevents client PCs from seeing one another in My Network Places or Network Neighborhood. Also, prevents one wireless client communicating with another wireless client. Stops the router from advertising its Wireless Multimedia (WMM) functionality, which provides basic quality of service for time-sensitive applications (e.g. VoIP, Video). Select the checkbox (cid:59) to enable this function. Sets the wireless network name. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access. The BSSID is a 48-bit identity used to identify a particular BSS (Basic Service Set) within an area. In Infrastructure BSS networks, the BSSID is the MAC (Media Access Control) address of the AP (Access Point); and in Independent BSS or ad hoc networks, the BSSID is generated randomly. A drop-down menu that permits worldwide and specific national settings. Local regulations limit channel range:
US= worldwide, Japan=1-14, Jordan= 10-13, Israel= 1-13 Wireless country code for transmit power limit. Country RegRev Max Clients The maximum number of clients that can access the router. Wireless -
Guest /
Virtual Access Points This router supports multiple SSIDs called Guest SSIDs or Virtual Access Points. To enable one or more Guest SSIDs select the checkboxes (cid:59) in the Enabled column. To hide a Guest SSID select its checkbox (cid:59) in the Hidden column. Do the same for Isolate Clients and Disable WMM Advertise. For a description of these two functions, see the previous entries for Clients Isolation and Disable WMM Advertise. Similarly, for Enable WMF, Max Clients and BSSID, consult the matching entries in this table. NOTE: Remote wireless hosts cannot scan Guest SSIDs. 132 6.12.8 Security 2.4GHz The following screen appears when Wireless Security is selected. The options shown here allow you to configure security features of the wireless LAN interface. Please see 6.12.9 for WPS setup instructions. Click Apply/Save to implement new configuration settings. WIRELESS SECURITY Setup requires that the user configure these settings using the Web User Interface
(see the table below). Select SSID Select the wireless network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that client will not be granted access. Network Authentication This option specifies whether a network key is used for authentication to the wireless network. If network authentication is set to Open, then no authentication is provided. Despite this, the identity of the client is still verified. Each authentication type has its own settings. For example, selecting 802.1X authentication will reveal the RADIUS Server IP address, Port and Key fields. WEP Encryption will also be enabled as shown below. 133 Different authentication type pops up different settings requests. Choosing 802.1X, enter RADIUS Server IP address, RADIUS Port, RADIUS key and Current Network Key. Also, enable WEP Encryption and select Encryption Strength. Select the Current Network Key and enter 13 ASCII characters or 26 hexadecimal digits for 128-bit encryption keys and enter 5 ASCII characters or 10 hexadecimal digits for 64-bit encryption keys. Choosing WPA2-PSK, you must enter WPA Pre-Shared Key and Group Rekey Interval. WEP Encryption This option specifies whether data sent over the network is encrypted. The same network key is used for data encryption and network authentication. Four network keys can be defined although only one can be used at any one time. Use the Current Network Key list box to select the appropriate network key. 134 Security options include authentication and encryption services based on the wired equivalent privacy (WEP) algorithm. WEP is a set of security services used to protect 802.11 networks from unauthorized access, such as eavesdropping; in this case, the capture of wireless network traffic. When data encryption is enabled, secret shared encryption keys are generated and used by the source station and the destination station to alter frame bits, thus avoiding disclosure to eavesdroppers. Under shared key authentication, each wireless station is assumed to have received a secret shared key over a secure channel that is independent from the 802.11 wireless network communications channel. Encryption Strength This drop-down list box will display when WEP Encryption is enabled. The key strength is proportional to the number of binary bits comprising the key. This means that keys with a greater number of bits have a greater degree of security and are considerably more difficult to crack. Encryption strength can be set to either 64-bit or 128-bit. A 64-bit key is equivalent to 5 ASCII characters or 10 hexadecimal numbers. A 128-bit key contains 13 ASCII characters or 26 hexadecimal numbers. Each key contains a 24-bit header (an initiation vector) which enables parallel decoding of multiple streams of encrypted data. 135 6.12.9 WPS 2.4GHz Wi-Fi Protected Setup (WPS) is an industry standard that simplifies wireless security setup for certified network devices. Every WPS certified device has both a PIN number and a push button, located on the device or accessed through device software. The VR-3060 has a 2.4GHz WPS button on the device. Devices with the WPS logo (shown here) support WPS. If the WPS logo is not present on your device it still may support WPS, in this case, check the device documentation for the phrase Wi-Fi Protected Setup. NOTE: WPS is only available in Open, WPA-PSK, WPA2-PSK and Mixed WPA2/WPA-PSK network authentication modes. Other authentication modes do not use WPS so they must be configured manually. To configure security settings with WPS, follow the procedures below. I. Setup Step 1: Enable WPS by selecting Enabled from the drop down list box shown. Step 2: Set the WPS AP Mode. Configured is used when the VR-3060 will assign security settings to clients. Unconfigured is used when an external client assigns security settings to the VR-3060. NOTES: Your client may or may not have the ability to provide security settings to the VR-3060. If it does not, then you must set the WPS AP mode to Configured. Consult the device documentation to check its capabilities. 136 IIa. PUSH-BUTTON CONFIGURATION The WPS push-button configuration provides a semi-automated configuration method. The WPS button on the front panel of the router can be used for this purpose. The WPS push-button configuration is described in the procedure below. It is assumed that the Wireless function is Enabled and that the router is configured as the Wireless Access Point (AP) of your WLAN. In addition, the wireless client must also be configured correctly and turned on, with WPS function enabled. NOTE: The wireless AP on the router searches for 2 minutes. If the router stops searching before you complete Step 4, return to Step 3. Step 3: Press WPS button Press the WPS button on the front panel of the router. The WPS LED will blink to show that the router has begun searching for the client. Step 4: Go to your WPS wireless client and activate the push-button function. A typical WPS client screenshot is shown below as an example. Now go to Step 7 (part III. Check Connection) to check the WPS connection. IIb. WPS PIN CONFIGURATION Using this method, security settings are configured with a personal identification number (PIN). The PIN can be found on the device itself or within the software. The PIN may be generated randomly in the latter case. To obtain a PIN number for your client, check the device documentation for specific instructions. The WPS PIN configuration is described in the procedure below. It is assumed that the Wireless function is Enabled and that the router is configured as the Wireless Access Point (AP) of your wireless LAN. In addition, the wireless client must also be configured correctly and turned on, with WPS function enabled. Step 5: Select the PIN radio button in the WSC Setup section of the Wireless Security screen, as shown in A or B below, and then click the appropriate button based on the WSC AP mode selected in step 2. A - For Configured mode, click the Add Enrollee button. 137 Enter STA PIN: a Personal Identification Number (PIN) has to be read from either a sticker or the display on the new wireless device. This PIN must then be inputted at representing the network, usually the Access Point of the network. B - For Unconfigured mode, click the Config AP button. Step 6: Activate the PIN function on the wireless client. For Configured mode, the client must be configured as an Enrollee. For Unconfigured mode, the client must be configured as the Registrar. This is different from the External Registrar function provided in Windows Vista. The figure below provides an example of a WPS client PIN function in-progress. III. CHECK CONNECTION Step 7:
If the WPS setup method was successful, you will be able access the wireless AP from the client. The client software should show the status. The example below shows that the connection established successfully. You can also double-click the Wireless Network Connection icon from the Network Connections window (or the system tray) to confirm the status of the new connection. 138 6.12.10 MAC Filter 2.4GHz This option allows access to the router to be restricted based upon MAC addresses. To add a MAC Address filter, click the Add button shown below. To delete a filter, select it from the MAC Address table below and click the Remove button. Option Description Select SSID Select the wireless network name from the drop-down menu. SSID stands for Service Set Identifier. All stations must be configured with the correct SSID to access the WLAN. If the SSID does not match, that user will not be granted access. Disabled: MAC filtering is disabled. Allow: Permits access for the specified MAC addresses. Deny: Rejects access for the specified MAC addresses. Lists the MAC addresses subject to the MAC Restrict Mode. A maximum of 60 MAC addresses can be added. Every network device has a unique 48-bit MAC address. This is usually shown as xx.xx.xx.xx.xx.xx, where xx are hexadecimal numbers. MAC Restrict Mode MAC Address After clicking the Add button, the following screen appears. 139 Enter the MAC address in the box provided and click Apply/Save. 140 6.12.11 Wireless Bridge 2.4GHz This screen allows for the configuration of wireless bridge features of the WiFi interface. See the table below for detailed explanations of the various options. Click Apply/Save to implement new configuration settings. Feature Description Bridge Restrict Selecting Disabled disables wireless bridge restriction, which means that any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) enables wireless bridge restriction. Only those bridges selected in the Remote Bridges list will be granted access. Click Refresh to update the station list when Bridge Restrict is enabled. Enter the list of MAC addresses allowed to act as wireless bridge clients. Remote Bridges MAC Address 141 6.12.12 Advanced 2.4GHz The Advanced screen allows you to configure advanced features of the wireless LAN interface. You can select a particular channel on which to operate, force the transmission rate to a particular speed, set the fragmentation threshold, set the RTS threshold, set the wakeup interval for clients in power-save mode, set the beacon interval for the access point, set XPress mode and set whether short or long preambles are used. Click Apply/Save to set new advanced wireless options. Field Band Description Set to 2.4 GHz for compatibility with IEEE 802.11x standards. The new amendment allows IEEE 802.11n units to fall back to slower speeds so that legacy IEEE 802.11x devices can coexist in the same network. IEEE 802.11g creates data-rate parity at 2.4 GHz with the IEEE 802.11a standard, which has a 54 Mbps rate at 5 GHz. (IEEE 802.11a has other differences compared to IEEE 802.11b or g, such as offering more channels.) 142 Field Channel Auto Channel Timer
(min) 802.11n/EWC Bandwidth Control Sideband 802.11n Rate 802.11n Protection Support 802.11n Client Only RIFS Advertisement OBSS Co-Existence Description Drop-down menu that allows selection of a specific channel. Auto channel scan timer in minutes (0 to disable) An equipment interoperability standard setting based on IEEE 802.11n Draft 2.0 and Enhanced Wireless Consortium
(EWC) Select 20MHz or 40MHz bandwidth. 40MHz bandwidth uses two adjacent 20MHz bands for increased data throughput. Select Upper or Lower sideband when in 40MHz mode. Set the physical transmission rate (PHY). Turn Off for maximized throughput. Turn On for greater security. Turn Off to allow 802.11b/g clients access to the router. Turn On to prohibit 802.11b/g clients access to the router. One of several draft-n features designed to improve efficiency. Provides a shorter delay between OFDM transmissions than in802.11a or g. Co-existence between 20 MHZ AND 40 MHZ overlapping Basic Service Set (OBSS) in WLAN. RX Chain Power Save Enabling this feature turns off one of the Receive chains, RX Chain Power Save Quiet Time RX Chain Power Save PPS 54g Rate Multicast Rate Basic Rate Fragmentation Threshold going from 2x2 to 2x1 to save power. The number of seconds the traffic must be below the PPS value below before the Rx Chain Power Save feature activates itself. The maximum number of packets per seconds that can be processed by the WLAN interface for a duration of Quiet Time, described above, before the Rx Chain Power Save feature activates itself. Drop-down menu that specifies the following fixed rates:
Auto: Default. Uses the 11 Mbps data rate when possible but drops to lower rates when necessary. 1 Mbps, 2Mbps, 5.5Mbps, or 11Mbps fixed rates. The appropriate setting is dependent on signal strength. Setting for multicast packet transmit rate (1-54 Mbps) Setting for basic transmission rate. A threshold, specified in bytes, that determines whether packets will be fragmented and at what size. On an 802.11 WLAN, packets that exceed the fragmentation threshold are fragmented, i.e., split into, smaller units suitable for the circuit size. Packets smaller than the specified fragmentation threshold value are not fragmented. Enter a value between 256 and 2346. If you experience a high packet error rate, try to slightly increase your Fragmentation Threshold. The value should remain at its default setting of 2346. Setting the Fragmentation Threshold too low may result in poor performance. 143 Field RTS Threshold DTIM Interval Beacon Interval Global Max Clients Xpress TM Technology WMM (Wi-Fi Multimedia) WMM No Acknowledgement WMM APSD Beamforming Transmission (BFR) Beamforming Reception (BFE) Description Request to Send, when set in bytes, specifies the packet size beyond which the WLAN Card invokes its RTS/CTS mechanism. Packets that exceed the specified RTS threshold trigger the RTS/CTS mechanism. The NIC transmits smaller packet without using RTS/CTS. The default setting of 2347 (maximum length) disables RTS Threshold. Delivery Traffic Indication Message (DTIM) is also known as Beacon Rate. The entry range is a value between 1 and 65535. A DTIM is a countdown variable that informs clients of the next window for listening to broadcast and multicast messages. When the AP has buffered broadcast or multicast messages for associated clients, it sends the next DTIM with a DTIM Interval value. AP Clients hear the beacons and awaken to receive the broadcast and multicast messages. The default is 1. The amount of time between beacon transmissions in milliseconds. The default is 100 ms and the acceptable range is 1 65535. The beacon transmissions identify the presence of an access point. By default, network devices passively scan all RF channels listening for beacons coming from access points. Before a station enters power save mode, the station needs the beacon interval to know when to wake up to receive the beacon (and learn whether there are buffered frames at the access point). The maximum number of clients that can connect to the router. Xpress Technology is compliant with draft specifications of two planned wireless industry standards. The technology maintains the priority of audio, video and voice applications in a Wi-Fi network. It allows multimedia service get higher priority. Refers to the acknowledge policy used at the MAC level. Enabling no Acknowledgement can result in more efficient throughput but higher error rates in a noisy Radio Frequency (RF) environment. This is Automatic Power Save Delivery. It saves power. Enable beamforming signal enhance for wireless transmission. Enable beamforming signal enhance for wireless reception. 144 Chapter 7 Diagnostics You can reach this page by clicking on the following icon located at the top of the screen. 7.1 Diagnostics Individual Tests The first Diagnostics screen is a dashboard that shows overall connection status. Click the Diagnostics Menu item on the left side of the screen to display the individual connections. 145 7.2 Ethernet OAM The Ethernet OAM (Operations, Administration, Management) page provides settings to enable/disable 802.3ah, 802.1ag/Y1.731 OAM protocols. To enable Ethernet Link OAM (802.3 ah), click Enabled to display the full configuration list. At least one option must be enabled for 802.1ah. WAN Interface OAM ID Auto Event Variable Retrieval Link Events Remote Loopback Active mode Select layer 2 WAN interface for outgoing OAM packets OAM Identification number Supports OAM auto event Supports OAM variable retrieval Supports OAM link events Supports OAM remove loopback Supports OAM active mode 146 To enable Ethernet Service OAM (802.1ag/Y1731), click Enabled to display the full configuration list. Click Apply/Save to implement new configuration settings. WAN Interface MD Level MD Name MA ID Local MEP ID Local MEP VLAN ID VLAN IP used for Local Maintenance End point Click CCM Transmission to enable CPE sending Continuity Check Message (CCM) continuously. Remote MEP ID Select from the list of WAN Interfaces to send OAM packets Maintenance Domain Level Maintenance Domain name Maintenance Association Identifier Local Maintenance association End Point Identifier Maintenance association End Point Identifier for the remote receiver To perform Loopback/Linktrace OAM test, enter the Target MAC of the destination and click Send Loopback or Send Linktrace button. Target MAC MAC Address of the destination to send OAM loopback/linktrace packet Time to Live value for the loopback/linktrace packet Linktrace TTL 147 7.3 Uptime Status This page shows System, DSL, ETH and Layer 3 uptime. If the DSL line, ETH or Layer 3 connection is down, the uptime will stop incrementing. If the service is restored, the counter will reset and start from 0. A Bridge interface will follow the DSL or ETH timer. The "ClearAll" button will restart the counters from 0 or show "Not Connected" if the interface is down. 148 7.4 Ping Input the IP address/hostname and click the Ping button to execute ping diagnostic test to send the ICMP request to the specified host. 149 7.5 Trace Route Input the IP address/hostname and click the TraceRoute button to execute the trace route diagnostic test to send the ICMP packets to the specified host. 150 Chapter 8 Management You can reach this page by clicking on the following icon located at the top of the screen. The Management menu has the following maintenance functions and processes:
8.1 Settings This includes Backup Settings, Update Settings, and Restore Default screens. 8.1.1 Backup Settings To save the current configuration to a file on your PC, click Backup Settings. You will be prompted for backup file location. This file can later be used to recover settings on the Update Settings screen, as described below. 151 8.1.2 Update Settings This option recovers configuration files previously saved using Backup Settings. Enter the file name (including folder path) in the Settings File Name box, or press Browse to search for the file, then click Update Settings to recover settings. 8.1.3 Restore Default Click Restore Default Settings to restore factory default settings. After Restore Default Settings is clicked, the following screen appears. Close the browser and wait for 2 minutes before reopening it. It may also be necessary, to reconfigure your PC IP configuration to match any new settings. 152 NOTE: This entry has the same effect as the Reset button. The VR-3060 board hardware and the boot loader support the reset to default. If the Reset button is continuously pressed for more than 10 seconds, the current configuration data will be erased. If the Reset button is continuously pressed for more than 60 seconds, the boot loader will erase all configuration data saved in flash memory and enter bootloader mode. 153 8.2 System Log This function allows a system log to be kept and viewed upon request. Follow the steps below to configure, enable, and view the system log. STEP 1: Click Configure System Log, as shown below (circled in Red). STEP 2: Select desired options and click Apply/Save. Consult the table below for detailed descriptions of each system log option. Option Description Log Indicates whether the system is currently recording events. The user can enable or disable event logging. By default, it is disabled. To enable it, select the Enable radio button and then click Apply/Save. 154 Option Description Log Level Informational= provides information for reference Allows you to configure the event level and filter out unwanted events below this level. The events ranging from the highest critical level Emergency down to this configured level will be recorded to the log buffer on the VR-3060 SDRAM. When the log buffer is full, the newer event will wrap up to the top of the log buffer and overwrite the old event. By default, the log level is Debugging, which is the lowest critical level. The log levels are defined as follows:
Emergency = system is unusable Alert = action must be taken immediately Critical = critical conditions Error = Error conditions Warning = normal but significant condition Notice= normal but insignificant condition Debugging = debug-level messages Emergency is the most serious event level, whereas Debugging is the least important. For instance, if the log level is set to Debugging, all the events from the lowest Debugging level to the most critical level Emergency level will be recorded. If the log level is set to Error, only Error and the level above will be logged. Allows the user to select the logged events and displays on the View System Log window for events of this level and above to the highest Emergency level. Allows you to specify whether events should be stored in the local memory, or be sent to a remote system log server, or both simultaneously. If remote mode is selected, view system log will not be able to display events saved in the remote system log server. When either Remote mode or Both mode is configured, the WEB UI will prompt the user to enter the Server IP address and Server UDP port. Display Level Mode STEP 3: Click View System Log. The results are displayed as follows. 155 8.3 SNMP Agent Simple Network Management Protocol (SNMP) allows a management application to retrieve statistics and status from the SNMP agent in this device. Select the Enable radio button, configure options, and click Save/Apply to activate SNMP. 156 8.4 TR-069 Client WAN Management Protocol (TR-069) allows an Auto-Configuration Server (ACS) to perform auto-configuration, provision, collection, and diagnostics to this device. Select desired values and click Apply/Save to configure TR-069 client options. The table below is provided for ease of reference. Option Enable TR-069 OUI-serial Description Tick the checkbox (cid:59) to enable. The serial number used to identify the CPE when making a connection to the ACS using the CPE WAN Management Protocol. Select MAC to use the routers MAC address as serial number to authenticate with the ACS or select serial number to use routers serial number. Disable/Enable TR-069 client on the CPE. The duration in seconds of the interval for which the CPE MUST attempt to connect with the ACS and call the Inform method. URL for the CPE to connect to the ACS using the CPE WAN Management Protocol. This parameter MUST be in the form of a valid HTTP or HTTPS URL. An HTTPS URL indicates that the ACS supports SSL. The host portion of this URL is used by the CPE for validating the certificate from the ACS when using certificate-based authentication. Inform Inform Interval ACS URL 157 Option ACS User Name ACS Password Description Username used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This username is used only for HTTP-based authentication of the CPE. Password used to authenticate the CPE when making a connection to the ACS using the CPE WAN Management Protocol. This password is used only for HTTP-based authentication of the CPE. Choose Any_WAN, LAN, Loopback or a configured connection. WAN Interface used by TR-069 client Connection Request Authentication User Name Password Tick the checkbox (cid:59) to enable. Username used to authenticate an ACS making a Connection Request to the CPE. Password used to authenticate an ACS making a Connection Request to the CPE. IP address and port the ACS uses to connect to the router. URL The Send Inform button forces the CPE to establish an immediate connection to the ACS. 158 8.5 Internet Time This option automatically synchronizes the router time with Internet timeservers. To enable time synchronization, tick the corresponding checkbox (cid:59), choose your preferred time server(s), select the correct time zone offset, and click Apply/Save. NOTE:
The Internet time feature will not operate when the router is in bridged mode, since the router would not be able to connect to the NTP timeserver. Internet Time must be activated to use. See 5.5 Parental Control. 159 8.6 Access Control 8.6.1 Accounts This screen is used to configure the user account access passwords for the device. Access to the VR-3060 is controlled through the following user accounts:
The root account has unrestricted access to view and change the configuration of your Broadband router. The support account is typically utilized by Carrier/ISP technicians for maintenance and diagnostics. The user account is typically utilized by End-Users to view configuration settings and statistics, with limited ability to configure certain settings. The apuser account is typically utilized by End-Users to view configuration settings and statistics, with limited ability to configure wireless settings. Use the fields to update passwords for the accounts, add/remove accounts (max of 5 accounts) as well as adjust their specific privileges. 160 Note: Passwords may be as long as 16 characters but must not contain a space. Click Save/Apply to continue. 161 8.6.2 Services The Services option limits or opens the access services over the LAN or WAN. The access services available are: HTTP, SSH, TELNET, SNMP, HTTPS, FTP, TFTP and ICMP. Enable a service by selecting its dropdown listbox. Click Apply/Save to activate. 162 8.6.3 IP Address The IP Address Access Control mode, if enabled, permits access to local management services from IP addresses contained in the Access Control List. If the Access Control mode is disabled, the system will not validate IP addresses for incoming packets. The services are the system applications listed in the Service Control List beside ICMP. Click the Add button to display the following. Configure the address and subnet of the management station permitted to access the local management services, and click Save/Apply. IP Address IP address of the management station. Subnet Mask Subnet address for the management station. Interface Access permission for the specified address, allowing the address to access the local management service from none/lan/wan/lan&wan interfaces. 163 8.7 Wake-on-LAN This tool allows you to wake up (power on) computers connected to the Broadband Router LAN interface by sending special "magic packets". The network interface card in the computer or device that is going to be woken up must support Wake-on-LAN. LAN Interface Select the LAN interface to send the Wake-on-LAN packet. MAC Address Specify the MAC address of the device that is going to be woken up. Click Send WoL magic packet to the Broadcast address if the WoL packets should be sent to the broadcast address. Click the Wake Up! button to send the magic packet out to the LAN interface. 164 8.8 Update Software This option allows for firmware upgrades from a locally stored file. STEP 1: Obtain an updated software image file from your ISP. STEP 2: Select the configuration from the drop-down menu. Configuration options:
No change upgrade software directly. Erase current config If the router has save_default configuration, this option will erase the current configuration and restore to save_default configuration after software upgrade. Erase All Router will be restored to factory default configuration after software upgrade. STEP 3: Enter the path and filename of the firmware image file in the Software File Name field or click the Browse button to locate the image file. STEP 4: Click the Update Software button once to upload and install the file. NOTE: The update process will take about 2 minutes to complete. The device will reboot and the browser window will refresh to the default screen upon successful installation. It is recommended that you compare the Software Version on the Device Information screen with the firmware version installed, to confirm the installation was successful. 165 8.9 Reboot To save the current configuration and reboot the router, click Reboot. You may need to close the browser window and wait for 2 minutes before reopening it. It may also be necessary, to reset your PC IP configuration. NOTE:
166 Chapter 9 Logout To log out from the device simply click the following icon located at the top of your screen. When the following window pops up, click the OK button to exit the router. Upon successful exit, the following message will be displayed. 167 Appendix A - Firewall STATEFUL PACKET INSPECTION Refers to an architecture, where the firewall keeps track of packets on each connection traversing all its interfaces and makes sure they are valid. This is in contrast to static packet filtering which only examines a packet based on the information in the packet header. DENIAL OF SERVICE ATTACK Is an incident in which a user or organization is deprived of the services of a resource they would normally expect to have. Various DoS attacks the device can withstand are ARP Attack, Ping Attack, Ping of Death, Land, SYN Attack, Smurf Attack, and Tear Drop. TCP/IP/PORT/INTERFACE FILTER These rules help in the filtering of traffic at the Network layer (i.e. Layer 3). When a Routing interface is created, Enable Firewall must be checked. Navigate to Advanced Setup (cid:198) Security (cid:198) IP Filtering. OUTGOING IP FILTER Helps in setting rules to DROP packets from the LAN interface. By default, if the Firewall is Enabled, all IP traffic from the LAN is allowed. By setting up one or more filters, specific packet types coming from the LAN can be dropped. Example 1: Filter Name Protocol Source IP address Source Subnet Mask Source Port Dest. IP Address Dest. Subnet Mask Dest. Port
: Out_Filter1
: TCP
: 192.168.1.45
: 255.255.255.0
: 80
: NA
: NA
: NA This filter will Drop all TCP packets coming from the LAN with IP Address/Subnet Mask of 192.168.1.45/24 having a source port of 80 irrespective of the destination. All other packets will be Accepted. Example 2: Filter Name Protocol Source IP Address Source Subnet Mask Source Port Dest. IP Address Dest. Subnet Mask Dest. Port
: Out_Filter2
: UDP
: 192.168.1.45
: 255.255.255.0
: 5060:6060
: 172.16.13.4
: 255.255.255.0
: 6060:7070 This filter will drop all UDP packets coming from the LAN with IP Address /
Subnet Mask of 192.168.1.45/24 and a source port range of 5060 to 6060, destined to 172.16.13.4/24 and a destination port range of 6060 to 7070. INCOMING IP FILTER Helps in setting rules to Allow or Deny packets from the WAN interface. By default, all incoming IP traffic from the WAN is Blocked, if the Firewall is Enabled. By setting up one or more filters, specific packet types coming from the WAN can be Accepted. 168 Example 1: Filter Name
: In_Filter1
: TCP Protocol
: Allow Policy
: 210.168.219.45 Source IP Address
: 255.255.0.0 Source Subnet Mask
: 80 Source Port
: NA Dest. IP Address
: NA Dest. Subnet Mask
: NA Dest. Port Selected WAN interface : br0 This filter will ACCEPT all TCP packets coming from WAN interface br0 with IP Address/Subnet Mask 210.168.219.45/16 with a source port of 80, irrespective of the destination. All other incoming packets on this interface are DROPPED. Example 2: Filter Name Protocol Policy Source IP Address Source Subnet Mask Source Port Dest. IP Address Dest. Sub. Mask Dest. Port Selected WAN interface : br0
: In_Filter2
: UDP
: Allow
: 210.168.219.45
: 255.255.0.0
: 5060:6060
: 192.168.1.45
: 255.255.255.0
: 6060:7070 This rule will ACCEPT all UDP packets coming from WAN interface br0 with IP Address/Subnet Mask 210.168.219.45/16 and a source port in the range of 5060 to 6060, destined to 192.168.1.45/24 and a destination port in the range of 6060 to 7070. All other incoming packets on this interface are DROPPED. MAC LAYER FILTER These rules help in the filtering of Layer 2 traffic. MAC Filtering is only effective in Bridge mode. After a Bridge mode connection is created, navigate to Advanced Setup (cid:198) Security (cid:198) MAC Filtering in the WUI. Example 1: Global Policy Protocol Type Dest. MAC Address Source MAC Address Src. Interface Dest. Interface
: Forwarded
: PPPoE
: 00:12:34:56:78:90
: NA
: eth1
: eth2 Addition of this rule drops all PPPoE frames going from eth1 to eth2 with a Destination MAC Address of 00:12:34:56:78:90 irrespective of its Source MAC Address. All other frames on this interface are forwarded. Example 2: Global Policy Protocol Type Dest. MAC Address Source MAC Address Src. Interface Dest. Interface
: Blocked
: PPPoE
: 00:12:34:56:78:90
: 00:34:12:78:90:56
: eth1
: eth2 Addition of this rule forwards all PPPoE frames going from eth1 to eth2 with a Destination MAC Address of 00:12:34:56:78 and Source MAC Address of 00:34:12:78:90:56. All other frames on this interface are dropped. 169 DAYTIME PARENTAL CONTROL This feature restricts access of a selected LAN device to an outside Network through the VR-3060, as per chosen days of the week and the chosen times. Example:
: FilterJohn User Name Browser's MAC Address : 00:25:46:78:63:21 Days of the Week Start Blocking Time End Blocking Time
: Mon, Wed, Fri
: 14:00
: 18:00 With this rule, a LAN device with MAC Address of 00:25:46:78:63:21 will have no access to the WAN on Mondays, Wednesdays, and Fridays, from 2pm to 6pm. On all other days and times, this device will have access to the outside Network. 170 Appendix B - Pin Assignments Giga ETHERNET Ports (RJ45) Pin Name BI_DA+
1 BI_DA-
2 3 BI_DB+
BI_DC+
4 BI_DC-
5 6 BI_DB-
BI_DD+
7 8 BI_DD-
Description Bi-directional pair A +
Bi-directional pair A -
Bi-directional pair B +
Bi-directional pair C +
Bi-directional pair C -
Bi-directional pair B -
Bi-directional pair D +
Bi-directional pair D -
171 Appendix C Specifications Hardware Interface RJ-11 X 1 for ADSL2+/VDSL2, RJ-45 X 4 for LAN, RJ-45 X 1 for WAN, Reset Button X 1, WPS/WiFi on/off button x2, Internal Wi-Fi Antennas X 2, External Wi-Fi Antennas X 2, Power Switch X 1, USB 3.0 Host X 1 WAN Interface Comply with ITU-T G.992.5, ITU-T G.992.3, ITU-T G.992.1, ANSI T1.413 Issue 2, AnnexM ADSL2+ Downstream: 24 Mbps Upstream: 1.3 Mbps Comply with G.993.2 (supporting profile 8a, 8b, 8c, 8d, 12a, 12b, 17a) VDSL2 Downstream: 100Mbps Upstream: 60Mbps 10/100/1000 Base T, IEEE 802.3, IEEE 802.3u IEEE 802.3ab LAN Interface Standard ..................... IEEE 802.3, IEEE 802.3u, IEEE 802.3ab 10/100/1000 BaseT ...... Auto-sense MDI/MDX support ......... Yes WLAN Interface Standard ................... IEEE802.11b/g/n/ac Encryption................... 64/128-bit Wired Equivalent Privacy (WEP) Channels ..................... 11 (US, Canada)/ 13 (Europe)/ 14 (Japan) Data Rate ................... Up to 300Mbps (2.4GHz) Up to 800Mbps (5GHz) WEP ........................... Yes WPA ........................... Yes IEEE 802.1x ................ Yes MAC Filtering ............... Yes ATM Attributes RFC 2684 (RFC 1483) Bridge/Route; RFC 2516 (PPPoE);
RFC 2364 (PPPoA); RFC 1577 (IPoA) PVCs ......................... 16 AAL type ..................... AAL5 ATM service class ......... UBR/CBR/VBR ATM UNI support .......... UNI 3.1/4.0 OAM F4/F5 .................. Yes Management Compliant with TR-069/TR-098/TR-104/TR-111 remote management protocols, SNMP, Telnet, Web-based management, Configuration backup and restoration, Software upgrade via HTTP / TFTP / FTP server 172 Bridge Functions Transparent bridging .............................. Yes VLAN support ....................................... Yes Spanning Tree Algorithm ........................ Yes IGMP Proxy .......................................... Yes Routing Functions Static route, RIP v1/v2, NAT/PAT, DHCP Server/Relay, DNS Proxy, ARP, Security Functions Authentication protocols: PAP, CHAP TCP/IP/Port filtering rules, Packet and MAC address filtering, Access Control, QoS IP QoS, SP/WFQ/WRR for QoS, Per-PVC packet level QoS Environment Condition Operating temperature ........................... 0 ~ 40 degrees Celsius Relative humidity .................................. 5 ~ 95% (non-condensing) Dimensions .................................... 280 mm (W) x 35 mm (H) x 210 mm (D) Kit Weight
(1* VR-3060, 1*RJ11 cable, 1*RJ45 cable, 1*power adapter) = 1.2 kg NOTE: Specifications are subject to change without notice. 173 Appendix D - SSH Client Unlike Microsoft Windows, Linux OS has a ssh client included. For Windows users, there is a public domain one called putty that can be downloaded from here:
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html To access the ssh client you must first enable SSH access for the LAN or WAN from the Management (cid:198) Access Control (cid:198) Services menu in the web user interface. To access the router using the Linux ssh client For LAN access, type: ssh -l root 192.168.1.1 For WAN access, type: ssh -l support WAN IP address To access the router using the Windows putty ssh client For LAN access, type: putty -ssh -l root 192.168.1.1 For WAN access, type: putty -ssh -l support WAN IP address NOTE: The WAN IP address can be found on the Device Info (cid:198) WAN screen 174 Appendix E - Printer Server These steps explain the procedure for enabling the Printer Server. NOTE:
This function only applies to models with a USB host port. STEP 1: Enable Print Server from Web User Interface. Select Enable on-board print server checkbox (cid:59) and enter Printer name and Make and model. Click the Apply/Save button. NOTE: The Printer name can be any text string up to 40 characters. The Make and model can be any text string up to 128 characters. STEP 2: Go to the Printers and Faxes application in the Control Panel and select the Add a printer function (as located on the side menu below). 175 STEP 3: Click Next to continue when you see the dialog box below. STEP 4: Select Network Printer and click Next. 176 STEP 5: Select Connect to a printer on the Internet and enter your printer link. NOTE: The printer name must be the same name entered in the ADSL modem
(e.g. http://192.168.1.1:631/printers/hp3845) and click Next. WEB UI printer server setting as in step 1. STEP 6: Click Have Disk and insert the printer driver CD. 177 STEP 7: Select driver file directory on CD-ROM and click OK. STEP 8: Once the printer name appears, click OK. 178 STEP 9: Choose Yes or No for default printer setting and click Next. STEP 10: Click Finish. 179 STEP 11: Check the status of printer from Windows Control Panel, printer window. Status should show as Ready. 180 Appendix F - Connection Setup Creating a WAN connection is a two-stage process. The following sections describe each stage in turn. 1 - Setup a Layer 2 Interface (ATM, PTM or Ethernet). 2 - Add a WAN connection to the Layer 2 Interface. F1 ~ Layer 2 Interfaces Every layer2 interface operates in Multi-Service Connection (VLAN MUX) mode, which supports multiple connections over a single interface. Note that PPPoA and IPoA connection types are not supported for Ethernet WAN interfaces. After adding WAN connections to an interface, you must also create an Interface Group to connect LAN/WAN interfaces. F1.1 ATM Interfaces Follow these procedures to configure an ATM interface. NOTE:
The VR-3060 supports up to 16 ATM interfaces. STEP 1: Go to Basic Setup
(cid:198) WAN Setup (cid:198) Select ATM Interface from the drop-down menu. This table is provided here for ease of reference. 181 Heading Interface VPI VCI DSL Latency Category Peak Cell Rate Sustainable Cell Rate Max Burst Size Link Type Connection Mode Description WAN interface name ATM VPI (0-255) ATM VCI (32-65535)
{Path0} (cid:198) portID = 0
{Path1} (cid:198) port ID = 1
{Path0&1} (cid:198) port ID = 4 ATM service category Maximum allowed traffic rate for the ATM PCR service connection The average allowable, long-term cell transfer rate on the VBR service connection The maximum allowable burst size of cells that can be transmitted continuously on the VBR service connection Choose EoA (for PPPoE, IPoE, and Bridge), PPPoA, or IPoA. Default Mode Single service over one connection Vlan Mux Mode Multiple Vlan service over one connection Quality of Service (QoS) status Select items for removal IP QoS Remove STEP 2: Click Add to proceed to the next screen. NOTE:
To add WAN connections to one interface type, you must delete existing connections from the other interface type using the remove button. 182 There are many settings here including: VPI/VCI, DSL Link Type, Encapsulation Mode, Service Category and Queue Weight. Here are the available encapsulations for each xDSL Link Type:
(cid:139) EoA- LLC/SNAP-BRIDGING, VC/MUX
(cid:139) PPPoA- VC/MUX, LLC/ENCAPSULATION
(cid:139) IPoA- LLC/SNAP-ROUTING, VC MUX STEP 3: Click Apply/Save to confirm your choices. On the next screen, check that the ATM interface is added to the list. For example, an ATM interface on PVC 0/35 in Default Mode with an EoA Link type is shown below. 183 To add a WAN connection go to Section F2 ~ WAN Connections. F1.2 PTM Interfaces Follow these procedures to configure a PTM interface. NOTE: The VR-3060 supports up to four PTM interfaces. STEP 1: Go to Basic Setup
(cid:198) WAN Setup (cid:198) Select PTM Interface from the drop-down menu. This table is provided here for ease of reference. Heading Interface Description WAN interface name. 184 Heading DSL Latency PTM Priority Connection Mode Description
{Path0} (cid:198) portID = 0
{Path1} (cid:198) port ID = 1
{Path0&1} (cid:198) port ID = 4 Normal or High Priority (Preemption). Default Mode Single service over one interface. Vlan Mux Mode Multiple Vlan services over one interface. Quality of Service (QoS) status. Select interfaces to remove. IP QoS Remove STEP 2: Click Add to proceed to the next screen. NOTE: To add WAN connections to one interface type, you must delete existing connections from the other interface type using the remove button. Default PTM interface Quality of Service can be configured here, including Scheduler, Queue Weight and Rate Limit. STEP 3: Click Apply/Save to confirm your choices. On the next screen, check that the PTM interface is added to the list. For example, a PTM interface in Default Mode is shown below. To add a WAN connection go to Section F2 ~ WAN Connections. 185 F1.3 Ethernet WAN Interface The VR-3060 supports a single Ethernet WAN interface over the ETH WAN port. Follow these procedures to configure an Ethernet interface. STEP 1: Go to Basic Setup
(cid:198) WAN Setup (cid:198) Select ETHERNET Interface from the drop-down menu. This table is provided here for ease of reference. Heading Interface/ (Name) WAN interface name. Connection Mode Description Remove STEP 2: Click Add to proceed to the next screen. Default Mode Single service over one interface. Vlan Mux Mode Multiple Vlan services over one interface. Select interfaces to remove. 186 STEP 3: Select an Ethernet port and Click Apply/Save to confirm your choices. On the next screen, check that the ETHERNET interface is added to the list. To add a WAN connection go to Section F2 ~ WAN Connections. 187 F2 ~ WAN Connections The VR-3060 supports one WAN connection for each interface, up to a maximum of 16 connections. To setup a WAN connection follow these instructions. STEP 1: Go to Basic Setup
(cid:198) WAN Setup. STEP 2: Click Add to create a WAN connection. The following screen will display. STEP 3: Choose a layer 2 interface from the drop-down box and click Next. The WAN Service Configuration screen will display as shown below. 188 NOTE:
The WAN services shown here are those supported by the layer 2 interface you selected in the previous step. If you wish to change your selection click the Back button and select a different layer 2 interface. STEP 4: For VLAN Mux Connections only, you must enter Priority & VLAN ID tags. Select a TPID if VLAN tag Q-in-Q is used. STEP 5: You will now follow the instructions specific to the WAN service type you wish to establish. This list should help you locate the correct procedure:
(1) For F2.1 PPP over ETHERNET (PPPoE), go to page 188.
(2) For F2.2 IP over ETHERNET (IPoE), go to page 194.
(3) For F2.3 Bridging, go to page 200.
(4) For F2.4 PPP over ATM (PPPoA), go to page 202.
(5) For F2.5 IP over ATM (IPoA), go to page 208. The subsections that follow continue the WAN service setup procedure. 189 F2.1 PPP over ETHERNET (PPPoE) STEP 1: Select the PPP over Ethernet radio button and click Next. You can also enable IPv6 by selecting from the drop-down box at the bottom of this screen. STEP 2: On the next screen, enter the PPP settings as provided by your ISP. Click Next to continue or click Back to return to the previous step. 190 Click Next to continue or click Back to return to the previous step. The settings shown above are described below. PPP SETTINGS The PPP Username, PPP password and the PPPoE Service Name entries are dependent on the particular requirements of the ISP. The user name can be a maximum of 256 characters and the password a maximum of 32 characters in length. For Authentication Method, choose from AUTO, PAP, CHAP, and MSCHAP. 191 ENABLE FULLCONE NAT This option becomes available when NAT is enabled. Known as one-to-one NAT, all requests from the same internal IP address and port are mapped to the same external IP address and port. An external host can send a packet to the internal host, by sending a packet to the mapped external address. DIAL ON DEMAND The VR-3060 can be configured to disconnect if there is no activity for a period of time by selecting the Dial on demand checkbox (cid:59). You must also enter an inactivity timeout period in the range of 1 to 4320 minutes. PPP IP EXTENSION The PPP IP Extension is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. PPP IP Extension does the following:
Allows only one PC on the LAN. Disables NAT and Firewall. The device becomes the default gateway and DNS server to the PC through DHCP using the LAN interface IP address. The device extends the IP subnet at the remote service provider to the LAN PC. i.e. the PC becomes a host belonging to the same IP subnet. The device bridges the IP packets between WAN and LAN ports, unless the packet is addressed to the devices LAN IP address. The public IP address assigned by the remote side using the PPP/IPCP protocol is actually not used on the WAN PPP interface. Instead, it is forwarded to the PC LAN interface through DHCP. Only one PC on the LAN can be connected to the remote, since the DHCP server within the device has only a single IP address to assign to a LAN device. ENABLE NAT If the LAN is configured with a private IP address, the user should select this checkbox (cid:59). The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not used on the LAN side (i.e. the LAN side is using a public IP), this checkbox (cid:59) should not be selected to free up system resources for better performance. ENABLE FIREWALL If this checkbox (cid:59) is selected, the Security submenu will be displayed on the Advanced Setup menu after reboot. If firewall is not necessary, this checkbox (cid:59) should not be selected to free up system resources for better performance. USE STATIC IPv4 ADDRESS Unless your service provider specially requires it, do not select this checkbox (cid:59). If selected, enter the static IP address in the IPv4 Address field. Dont forget to adjust the IP configuration to Static IP Mode as described in section 3.2 IP Configuration. FIXED MTU Maximum Transmission Unit. The size (in bytes) of largest protocol data unit which the layer can pass onwards. This value is 1492 for PPPoE. 192 ENABLE PPP DEBUG MODE When this option is selected, the system will put more PPP connection information into the system log. This is for debugging errors and not for normal usage. BRIDGE PPPOE FRAMES BETWEEN WAN AND LOCAL PORTS
(This option is hidden when PPP IP Extension is enabled) When Enabled, this creates local PPPoE connections to the WAN side. Enable this option only if all LAN-side devices are running PPPoE clients, otherwise disable it. The VR-3060 supports pass-through PPPoE sessions from the LAN side while simultaneously running a PPPoE client from non-PPPoE LAN devices. ENABLE IGMP MULTICAST PROXY Tick the checkbox (cid:59) to enable Internet Group Membership Protocol (IGMP) multicast. This protocol is used by IPv4 hosts to report their multicast group memberships to any neighboring multicast routers. Enable IGMP Multicast Source Enable the WAN interface to be used as IGMP multicast source. STEP 3: Choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 193 STEP 4: Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. Click Next to continue or click Back to return to the previous step. 194 STEP 5: The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. 195 F2.2 IP over ETHERNET (IPoE) STEP 1: *Select the IP over Ethernet radio button and click Next.
*
For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. 196 STEP 2: The WAN IP settings screen provides access to the DHCP server settings. You can select the Obtain an IP address automatically radio button to enable DHCP (use the DHCP Options only if necessary). However, if you prefer, you can use the Static IP address method instead to assign WAN IP address, Subnet Mask and Default Gateway manually. NOTE:
If IPv6 networking is enabled, an additional set of instructions, radio buttons, and text entry boxes will appear at the bottom of the screen. These configuration options are quite similar to those for IPv4 networks. Click Next to continue or click Back to return to the previous step. 197 STEP 3: This screen provides access to NAT, Firewall and IGMP Multicast settings. Enable each by selecting the appropriate checkbox (cid:59). Click Next to continue or click Back to return to the previous step. ENABLE NAT If the LAN is configured with a private IP address, the user should select this checkbox (cid:59). The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not used on the LAN side (i.e. the LAN side is using a public IP), this checkbox (cid:59) should not be selected, so as to free up system resources for improved performance. ENABLE FULLCONE NAT This option becomes available when NAT is enabled. Known as one-to-one NAT, all requests from the same internal IP address and port are mapped to the same external IP address and port. An external host can send a packet to the internal host, by sending a packet to the mapped external address. ENABLE FIREWALL If this checkbox (cid:59) is selected, the Security submenu will be displayed on the Advanced Setup menu after reboot. If firewall is not necessary, this checkbox (cid:59) should not be selected so as to free up system resources for better performance. ENABLE IGMP MULTICAST PROXY Tick the checkbox (cid:59) to enable Internet Group Membership Protocol (IGMP) multicast. This protocol is used by IPv4 hosts to report their multicast group memberships to any neighboring multicast routers. Enable IGMP Multicast Source Enable the WAN interface to be used as IGMP multicast source. 198 STEP 4: To choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 199 STEP 5: Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. Click Next to continue or click Back to return to the previous step. 200 STEP 6: The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. 201 F2.3 Bridging STEP 1: *Select the Bridging radio button and click Next. Allow as IGMP Multicast Source Click to allow use of this bridge WAN interface as IGMP multicast source. Allow as MLD Multicast Source Click to allow use of this bridge WAN interface as MLD multicast source.
*
For tagged service, enter valid 802.1P Priority and 802.1Q VLAN ID. For untagged service, set -1 to both 802.1P Priority and 802.1Q VLAN ID. For VLAN tag Q-in-Q service, select the TPID from the list. 202 STEP 2: The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to return to the previous screen. After clicking Apply/Save, the new service should appear on the main screen. NOTE:
If this bridge connection is your only WAN service, the VR-3060 will be inaccessible for remote management or technical support from the WAN. 203 F2.4 PPP over ATM (PPPoA) STEP 1: Click Next to continue. 204 STEP 2: On the next screen, enter the PPP settings as provided by your ISP. Click Next to continue or click Back to return to the previous step. PPP SETTINGS The PPP username and password are dependent on the requirements of the ISP. The user name can be a maximum of 256 characters and the password a maximum of 32 characters in length. (Authentication Method: AUTO, PAP, CHAP, or MSCHAP.) KEEP ALIVE INTERVAL This option configures the interval between each PPP LCP request and the amount of time to wait for the PPP server to reply to the LCP request. If the time expired on all requests, the current PPP session would be dropped. 205 ENABLE FULLCONE NAT This option becomes available when NAT is enabled. Known as one-to-one NAT, all requests from the same internal IP address and port are mapped to the same external IP address and port. An external host can send a packet to the internal host, by sending a packet to the mapped external address. DIAL ON DEMAND The VR-3060 can be configured to disconnect if there is no activity for a period of time by selecting the Dial on demand checkbox (cid:59). You must also enter an inactivity timeout period in the range of 1 to 4320 minutes. PPP IP EXTENSION The PPP IP Extension is a special feature deployed by some service providers. Unless your service provider specifically requires this setup, do not select it. PPP IP Extension does the following:
Allows only one PC on the LAN. Disables NAT and Firewall. The device becomes the default gateway and DNS server to the PC through DHCP using the LAN interface IP address. The device extends the IP subnet at the remote service provider to the LAN PC. i.e. the PC becomes a host belonging to the same IP subnet. The device bridges the IP packets between WAN and LAN ports, unless the packet is addressed to the devices LAN IP address. The public IP address assigned by the remote side using the PPP/IPCP protocol is actually not used on the WAN PPP interface. Instead, it is forwarded to the PC LAN interface through DHCP. Only one PC on the LAN can be connected to the remote, since the DHCP server within the device has only a single IP address to assign to a LAN device. ENABLE NAT If the LAN is configured with a private IP address, the user should select this checkbox (cid:59). The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not used on the LAN side (i.e. the LAN side is using a public IP), this checkbox (cid:59) should not be selected to free up system resources for better performance. ENABLE FIREWALL If this checkbox (cid:59) is selected, the Security submenu will be displayed on the Advanced Setup menu after reboot. If firewall is not necessary, this checkbox (cid:59) should not be selected to free up system resources for better performance. USE STATIC IPv4 ADDRESS Unless your service provider specially requires it, do not select this checkbox (cid:59). If selected, enter the static IP address in the IP Address field. Also, dont forget to adjust the IP configuration to Static IP Mode as described in 3.2 IP Configuration. Fixed MTU Fixed Maximum Transmission Unit. The size (in bytes) of largest protocol data unit which the layer can pass onwards. This value is 1500 for PPPoA. 206 ENABLE PPP DEBUG MODE When this option is selected, the system will put more PPP connection information into the system log. This is for debugging errors and not for normal usage. ENABLE IGMP MULTICAST PROXY Tick the checkbox (cid:59) to enable Internet Group Membership Protocol (IGMP) multicast. This protocol is used by IPv4 hosts to report their multicast group memberships to any neighboring multicast routers. Enable IGMP Multicast Source Enable the WAN interface to be used as IGMP multicast source. STEP 3: Choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 207 STEP 4: Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. Click Next to continue or click Back to return to the previous step. 208 STEP 5: The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. 209 F2.5 IP over ATM (IPoA) STEP 1: Click Next to continue. STEP 2: Enter the WAN IP settings provided by your ISP. Click Next to continue. STEP 3: This screen provides access to NAT, Firewall and IGMP Multicast settings. Enable each by selecting the appropriate checkbox (cid:59). Click Next to continue or click Back to return to the previous step. 210 ENABLE NAT If the LAN is configured with a private IP address, the user should select this checkbox (cid:59). The NAT submenu will appear in the Advanced Setup menu after reboot. On the other hand, if a private IP address is not used on the LAN side (i.e. the LAN side is using a public IP), this checkbox (cid:59) should not be selected, so as to free up system resources for improved performance. ENABLE FULLCONE NAT This option becomes available when NAT is enabled. Known as one-to-one NAT, all requests from the same internal IP address and port are mapped to the same external IP address and port. An external host can send a packet to the internal host by sending a packet to the mapped external address. ENABLE FIREWALL If this checkbox (cid:59) is selected, the Security submenu will be displayed on the Advanced Setup menu after reboot. If firewall is not necessary, this checkbox (cid:59) should not be selected so as to free up system resources for better performance. ENABLE IGMP MULTICAST PROXY Tick the checkbox (cid:59) to enable Internet Group Membership Protocol (IGMP) multicast. This protocol is used by IPv4 hosts to report their multicast group memberships to any neighboring multicast routers. Enable IGMP Multicast Source Enable the WAN interface to be used as IGMP multicast source. STEP 4: Choose an interface to be the default gateway. Click Next to continue or click Back to return to the previous step. 211 NOTE:
If the DHCP server is not enabled on another WAN interface then the following notification will be shown before the next screen. STEP 5: Select DNS Server Interface from available WAN interfaces OR enter static DNS server IP addresses for the system. In ATM mode, if only a single PVC with IPoA or static IPoE protocol is configured, Static DNS server IP addresses must be entered. Click Next to continue or click Back to return to the previous step. 212 STEP 6: The WAN Setup - Summary screen shows a preview of the WAN service you have configured. Check these settings and click Apply/Save if they are correct, or click Back to modify them. After clicking Apply/Save, the new service should appear on the main screen. 213
1 2 | Internal Photos | Internal Photos | 900.44 KiB | / February 10 2016 |
Internal Photos Model Number:
VR-3060u, VR-3060 FCC ID: L9VVR3060U IC:4013A-VR3060U Page 1 of 10 EUT Photo 1 ) EUT Photo 2 ) WLAN 5GHz ANT-1 Page 2 of 10 EUT Photo 3 ) EUT Photo 4 ) Page 3 of 10 EUT Photo 5 ) EUT Photo 6 ) Page 4 of 10 EUT Photo 7 ) EUT Photo 8 ) Page 5 of 10 EUT Photo 9 ) EUT Photo 10 ) Page 6 of 10 EUT Photo 11 ) EUT Photo 12 ) Page 7 of 10 EUT Photo 13 ) EUT Photo 14 ) Page 8 of 10 EUT Photo 15 ) EUT Photo 16 ) Page 9 of 10 EUT Photo 17 ) Page 10 of 10
1 2 | External Photos | External Photos | 357.21 KiB | / February 10 2016 |
External Photos Model Number:
VR-3060u, VR-3060 FCC ID: L9VVR3060U IC:4013A-VR3060U Page 1 of 6 EUT Photo 1 ) EUT Photo 2 ) Page 2 of 6 EUT Photo 3 ) WLAN 2.4GHz ANT-0
+
5GHz ANT-0 WLAN 2.4GHz ANT-1
+
5GHz ANT-2 EUT Photo 4 ) Page 3 of 6 EUT Photo 5 ) EUT Photo 6 ) Page 4 of 6 EUT Photo 7 ) EUT Photo 8 ) Page 5 of 6 EUT Photo 9 ) EUT Photo 10 ) Page 6 of 6
1 2 | Label & Label Location | ID Label/Location Info | 271.61 KiB | / February 10 2016 |
ID Label info & Label Location FCC ID : L9VVR3060U IC : 4013A-VR3060U
1 2 | DOC Attestation Letter | Attestation Statements | 66.71 KiB | / February 10 2016 |
Comtrend Corporation 3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist, New Taipei City 24159, Taiwan TEL: +886-2-2999-8261 FAX: +886-2-2999-8497 Attestation for FCC Declaration of Conformity Brand: COMTREND |
Model Number: VR-3060u, VR-3060 Date: 2016/07/22 FCC ID: LOSVVR3060U Please be notified that we, Comtrend Corporation, would like to declare that the composite portion categorized as computer peripheral has been authorized under the FCC Declaration of Conformity procedures. The test report numbers supporting the DoC is 1605FE35 Testing in regards to this report was done by A Test Lab Techno Corp., located in No. 140-1, Changan Street, Bade District, Taoyuan City 33465, Taiwan (R.O.C), which has been accredited in accordance to all of the requirements of 47 CFR 2.948 (d) and (e) of the FCC rules and KDB349827. Sincerely, 2 "f Bill Wang / Engineer 3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist, New Taipei City 24159, Taiwan
1 2 | DTS Ch12&13 Declaration letter | Cover Letter(s) | 169.99 KiB | / February 10 2016 |
Comtrend Corporation WIFI Channel 12 & 13 Declaration Letter To whom it may concern :
We have declared below featured for FCC equipment authorization in regard to 802.11b/g/n channel 12 &
13 operating capability for FCC ID : L9VVR3060U Please check ElOQUcL NACE LIOL Pie Capa ye ere CLAM ELEC LILLIE DELL EEL Zz Qe Aa hn eg AS Ve Cavavillv eee alco Ac SOS OR EEN ESECANA i 2) 2243 ny EY SH rz oj 3 Bart Sod Ue Gp E A j EIS 3 ECE By cS 2 Ag ee Hine RRRTe LoL HLL oe LE Z LZ a ZA LLL ELL 126 Z Ni ACC ALE Ey OE Lr LILLIE Name / Title : Bill Wang / Engineer Phone : +886-2-2999-8261 Email : bill. wang@comtrend.com Company Name: Comtrend Corporation Address : 3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist, New Taipei City 24159, Taiwan Date :2016/07/22 eck dat AS A at ae cant ged a os oops ne ee ae nen
1 2 | LTC Letter | Cover Letter(s) | 106.14 KiB | / February 10 2016 |
775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: TCB@siemic.com Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template& Added text box obsolete) Added IC confidentiality letter form (obsolete) Revision History To Approved Date Nov-14-2006 August - 11 - 2008 Jan-31-2012 March-26-2015 Corrections to STC form. Added reference to KDB Nov 19 2015
(current) a eee SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 5.0 Comtrend Corporation 2016/07/22 To:
Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: L9VVR3060U Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as:
- Block Diagram
- Schematics
- Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. sincerely, Bill Wang / Engineer Comtrend Corporation 3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist, New Taipei City 24159, Taiwan SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 5.0 aie eae vd a Pa ee aca
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-10-02 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
2 | 5745 ~ 5825 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-10-02
|
||||
1 2 | Applicant's complete, legal business name |
Comtrend Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0010188456
|
||||
1 2 | Physical Address |
3F-1, 10 Lane 609, Chung Hsin Road, Section 5, San Chung Dist
|
||||
1 2 |
3F-1, 10 Lane 609, Chung Hsin Road, Section 5
|
|||||
1 2 |
New Taipei City,, N/A
|
|||||
1 2 |
Taiwan
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
t******@siemic.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
L9V
|
||||
1 2 | Equipment Product Code |
VR3060U
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
B****** W********
|
||||
1 2 | Telephone Number |
+886-********
|
||||
1 2 | Fax Number |
+886-********
|
||||
1 2 |
b******@comtrend.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Wireless Gateway | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Power Output listed is conducted. Device contains 20/40MHz bandwidth and is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | ||||
1 2 | Power Output listed is conducted. Device contains 20/40/80MHz bandwidth and is a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. | |||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
A Test Lab Techno Corp.
|
||||
1 2 | Name |
J**** L******
|
||||
1 2 | Telephone Number |
886-3********
|
||||
1 2 | Fax Number |
886-3********
|
||||
1 2 |
J******@atl-lab.com.tw
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 68 CC MO | 2412.00000000 | 2462.00000000 | 0.9620000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 38 68 CC MO | 5180 | 5240 | 0.538 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 38 68 CC MO | 5745 | 5825 | 0.609 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC