( )
: iPin-RBC551 1BTtogo BTtogo / USB BttogoLED 1.20LEDBTtogo 2. 2iPin App 3 !
3 Scan 4 3 iPin BT Dongle BTtogo 4 30.2 x 12 x 70.6 mm Micro-SD card Bluetooth 4.0 (BLE mode) / RF 2.40~2.48 GHz iPin iPiniPhone iPinAndroid Windows and Mac OS iPhone 4S or later Bluetooth4.0Android 32 to 113 F ( 0 to 45 C )
-4 to 131 F ( -20 to 55 C ) BTtogo
1 2
: http://ipinlaser.com.tw
1 2
iPin Laser Presenter Accessory for Bluetooth Connection Model No : iPin-RBC551 Product Specification Setup Direction Setup Direction Product Specification Step 1: Insert BTtogo Insert BTtogo into your PC or Laptop USB port. The Blue LED on BTtogo will "ash waiting for connection Note : 1. The blue LED will go out in 20 seconds, it not connected, and can be reconnect at any time. 2. If your computer prompted to identify the type of keyboard, please select Skip. Step 2 : Connection On your smartphone : open the iPin App and follow the instruction in below:
Dimension : 30.2 x 12 x 70.6 mm Memory Card Type : Micro-SD card only Bluetooth Version : Bluetooth 4.0 (BLE ode) / RF Frequency : 2.40~2.48 GHz System Requirements Support iPin Product Model iPin laser Presenter for iPhone iPin laser Presenter for android Connection Device System : Both Windows and Mac_OS Support Phone Model iPhone 4S or later All Android smartphones equipped with Bluetooth 4.0 Environmental Requirements :
Operating temperature : 32 to 113 F ( 0 to 45 C ) Storage temperature : -4 to 131 F ( -20 to 55 C ) BTtogo Quick Guide Official Website : http : //ipinlaser.com Disclaimer :
1 2 1 Tap to choose 2 Choose Bluetooth Step 3 : Connection 3 Tap to scan. 4 3 Tap iPin BT Dongle. The connection is established when the blue LED lights up. 4 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
(2) this device must accept any harmful interference received, interference that may cause undesired operation. interference, and including This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one of the following measures :
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Federal Communication Commission Interference Statement Canada-Industry Canada (IC) FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiation Exposure Statement :
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Note : The country code selection is for non-US model only and is not available to all US model. Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only. Industry Canada statement :
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. radio exempts de Ce dispositif est conforme la norme CNR-210 d'Industrie Canada applicable aux appareils licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Radiation Exposure Statement :
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled environment and are safe for intended operation as described in this manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if such function is available. Dclaration d'exposition aux radiations :
Le produit est conforme aux limites d'exposition pour les appareils portables RF pour les Etats-Unis et le Canada tablies pour un environnement non contrl. Le produit est sr pour un fonctionnement tel que dcrit dans ce manuel. La rduction aux expositions RF peut tre augmente si l'appareil peut tre conserv aussi loin que possible du corps de l'utilisateur ou que le dispositif est rgl sur la puissance de sortie la plus faible si une telle fonction est disponible.