FCC ID: 2ASM6-CXWA Wireless Controller

CONDUCTIX INCORPORATED The technical data and images which appear in this manual are for informational purposes only. NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE CREATED BY THE DESCRIPTIONS AND DEPICTIONS OF THE PRODUCTS SHOWN IN THIS MANUAL. Conductix makes no warranty (and assumes no liability) as to function of equipment or operation of systems built according to customer design or of the ability of any of its products to interface, operate or function with any portions of customer systems not provided by Conductix. Seller agrees to repair or exchange the goods sold hereunder necessitated by reason of defective workmanship and material discovered and reported to Seller within one year after shipment of such goods to Buyer. Except where the nature of the defect is such that it is appropriate, in Sellers judgment, to effect repairs on site, Sellers obligation hereunder to remedy defects shall be limited to repairing or replacing (at Sellers option) FOB point of original shipment by Seller, any part returned to Seller at the risk and cost of Buyer. Defective parts replaced by Seller shall become the property of Seller. Seller shall only be obligated to make such repair or replacement if the goods have been used by Buyer only in service recommended by Seller and altered only as authorized by Seller. Seller is not responsible for defects which arise from improper installation, neglect, or improper use or from normal wear and tear. Additionally, Sellers obligation shall be limited by the manufacturers warranty (and is not further warranted by Seller) for all parts procured from others according to published data, specifications or performance information not designed by or for Seller. Seller further agrees to replace or at Sellers option to provide a refund of the sales price of any goods that do not conform to applicable specifications or which differ from that agreed to be supplied which non-conformity is discovered and forthwith reported to Seller within thirty (30) days after shipment to the Buyer. Sellers obligation to replace or refund the purchase price for non-conforming goods shall arise once Buyer returns such goods FOB point of original shipment by Seller at the risk and cost of Buyer. Goods replaced by Seller shall become the property of Seller. There is no guarantee or warranty as to anything made or sold by Seller, or any services performed, except as to title and freedom from encumbrances and, except as herein expressly stated and particularly, and without limiting the foregoing, there is no guarantee or warranty, express or implied, of merchantability or of fitness for any particular purpose or against claim of infringement or the like. Seller makes no warranty (and assumes no liability) as to function of equipment or operation of systems built to Buyers design or of the ability of any goods to interface, operate or function with any portions of Buyers system not provided by Seller. Sellers liability on any claim, whether in contract, tort (including negligence), or otherwise, for any loss or damage arising out of, connected with, or resulting from the manufacture, sale, delivery, resale, repair, replacement or use of any products or services shall in no case exceed the price paid for the product or services or any part thereof which give rise to the claim. In no event shall Seller be liable for consequential, special, incidental or other damages, nor shall Seller be liable in respect of personal injury or damage to property not the subject matter hereof unless attributable to gross misconduct of Seller, which shall mean an act or omission by Seller demonstrating reckless disregard of the foreseeable consequences thereof. Seller is not responsible for incorrect choice of models or where products are used in excess of their rated and recommended capacities and design functions or under abnormal conditions. Seller assumes no liability for loss of time, damage or injuries to property or persons resulting from the use of Sellers products. Buyer shall hold Seller harmless from all liability, claims, suits and expenses in connection with loss or damage resulting from operation of products or utilization of services, respectively, of Seller and shall defend any suit or action which might arise there from in Buyers name - provided that Seller shall have the right to elect to defend any such suit or action for the account of Buyer. The foregoing shall be the exclusive remedies of the Buyer and all persons and entitles claiming through the Buyer. 2 TABLE OF CONTENTS SECTION 1 - GETTING STARTED Quick Guide App Download Device Safety Features SECTION 2 - MOBILE APP INITIAL SETUP Scan Screen Info Screen Scan Screen Device List Device Control SECTION 3 - MOBILE APP USER CONFIGURATION Default Pin Code Screen Ready To Use Screen Default Master Password Screen Change Master Password Screen Change Device Pincode Screen Change Device Name SECTION 4 - TROUBLESHOOTING APP Incorrect Password Screen Reel Damage Warning Screen Attention:

Changes or modifications not expressly approved by the manufacturer could void the users authority to operate this equipment. This product meets the applicable FCC Part 15 rules and Industry Canadas license exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent materiel est conforme aux CNRexempts de licence dIndustrie Canada. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer dinterfrences, et (2) cet appareil doit accepter toute interfrence, y compris celles susceptibles de provoquer le fonctionnement du dispositive To limit RF exposure, please ensure 4 inches (10 cm) of separation from the transmitter antennas at all times. FCC ID: 2ASM6-CXWA IC: 11769A-CXWA 4 4 4 5 6 6 6 7 7 8 9 9 9 10 11 11 12 13 15 15 3 SECTION 1 - GETTING STARTED The VersaReel Blue is able to connect to all Bluetooth-enabled Apple and Android devices. Optimal range to use the VersaReel Blue is up to 100 feet. As a safety feature, Bluetooth connection from the app to the reel will terminate when the screen is locked, or goes into sleep mode. The user will need to reconnect the app to the reel at this point. Quick Guide App Download 1. On an Apple iPhone or iPad, go to the App Store; on an Android OS phone or tablet, go to the Google Play Store. 2. In the search field, type in versareelblue. Tap the VersaReelBlue app to open. 3. Tap Install in Google Play Store for Android version; tap in Apple Store for iOS version. 4. Once install is complete, tap Open to open the app. 4 SECTION 1 - GETTING STARTED Device Safety Features If the user taps the Up or Down buttons more than three times consecutively within 0.5 seconds of each other, all reel function stops and a warning appears. The user must press Got It to continue. Holding the Up or Down buttons for 25 seconds, regardless of the reel speed, will cause all motor operation to stop. Figure 6-1: App download screen Figure 6-2: App download screen

(Apple OS)

(Android OS) 5 SECTION 2 - MOBILE APP INITIAL SETUP Scan Screen Info Screen 1 When the Scan screen comes up, press the Info button to display required user information. The Info screen provides the most current version for the app; a downloadable PDF of the user manual; FAQs; the default pincode; and the default password. Callouts: 1) Link to the user manual 6 SECTION 2 - MOBILE APP INITIAL SETUP Scan Screen Device List 3 1 2 When the Scan screen comes up, press Scan button to display a list of available devices to connect to. 4 The Scan screen shows the individual devices to interact with. When user presses the Hold To Detect Device button, the reels light indicator turns red to show which reel the signal is being transmitted to. Green on the light indicator shows an available reel. Callouts: 1) Detect device; 2) Connect to device; 3) Scan; 4) Hold To Detect Device button 7 SECTION 2 - MOBILE APP INITIAL SETUP Device Control 1 2 Once a device is paired, the main Device Control screen comes up. Callouts: 1) Retract; 2) Pay out 8 SECTION 3 - MOBILE APP USER CONFIGURATION Default Pin Code Screen Ready To Use Screen The first time the Up/Down buttons are pressed, a Pairing Requests prompts user to enter pincode. Enter 123456 (pin code can be changed in the Setting screen). NOTE The text prompting user to enter 0000 or 1234 is auto-generated by the phone and is not applicable. At the Ready To Use screen, changes to the reels pincode, name, and password are done by pressing the Setting tab. Users are encouraged to change the default password following the initial setup. The maximum number of characters for the password is 12 characters, and it must contain one number. 9 SECTION 3 - MOBILE APP USER CONFIGURATION Default Master Password Screen After selecting Setting, a prompt asks for the default master password. Enter password. The master password allows user to change the reels pincode, name, and password. Users are encouraged to change the default password following the initial setup. 10 SECTION 3 - MOBILE APP USER CONFIGURATION Change Master Password Screen Change Device Pincode Screen Master (or User) Password is required to access the Settings Panel. Choose the Change Master Password option to expand the form. Toggle Show Password to help verify the input is correct. The Device Pin code is used to access the reels main controls. The pin code must be a 6-digit number. If there are issues after the pin code is changed, please refer to the Troubleshooting section. Choose the Change Device Pincode option to expand the form. Toggle Show Pin code to help verify the correct input. 11 SECTION 3 - MOBILE APP USER CONFIGURATION Change Device Name Select to open Change Device Name form. Enter the devices new name here. After tapping Confirm, this is the name that will display once the reel is reconnected. 12 SECTION 4 - TROUBLESHOOTING APP Forgot User Password 1. Power down the reel and wait until the power indicator light goes off. 2. Open the cover. Jumper should be on FR2. 3. Put the jumper to FR1 and FR2 . 4. Power up the board. 5. Verify the password has been reset to the default password. 6. Replace the cover. 7. See Section 8 on resetting the password. NOTE An interruption in power to the reel does not cause the current password to reset back to the default password. Reel control unresponsive after changing Pin code The phones memory regarding the device must be cleared. For IOS:

Go to Settings->Bluetooth. Click the symbol next to your reel under My Devices. Select Forget This Device, and this will erase the device memory on the phone. Select Forget Device. The next time you control the reel, you will have to input in a new pin code that you have assigned. 13 SECTION 4 - TROUBLESHOOTING APP For Android:

Pull down the top screen, and then press and hold the Bluetooth icon. Tap the gear icon next to the VersaReel Blue. Under the Paired Device screen, tap Unpair and this will erase the device memory of the phone. The next time you control a reel, you will have to input in a new pin code that you have assigned. Unable to connect to reel Disconnect Bluetooth from the phones Settings screen. Turn off, leave off for 5 seconds, then turn Bluetooth back on. Unable to find reel to control on Available Devices list There is likely a connection error between the phone and the reel. To fix this issue:

1. Power down the reel. 2. Wait one minute. 3. Power up the reel. More than one user attempting to use VersaReel Blue at the same time As a safety feature, only one user can control the VersaReel Blue at a time; all others will not see it as available to connect to. To make the reel available for another user, the controlling user must either disconnect from it manually or turn the screen on the phone/tablet off. 14 SECTION 4 - TROUBLESHOOTING APP Incorrect Password Screen Reel Damage Warning Screen An incorrect password will trigger an error message at the top of the screen. If user has forgotten password, refer to Forgot User Password at the beginning of this section. At this point, the reel is set up and ready to use. If the user presses either button more than 3 times (at least 0.5 seconds each time), a reel damage warning appears. The user must press Got It! to continue using the reel. 15

LABEL FCC ID: 2ASM6-CXWA IC: 11769A-CXWA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2ASM6-CXWA IC: 11769A-CXWA This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 4pt. font. Vinyl label. LABEL HVIN Silk-screened

Authority to Act as Agent Date: January 12, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

Nic Johnson of the Nebraska Center for Excellence in Electronics is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, Agency Agreement Expiration Date:

12 months By:

(Signature ) Mr. Hau T Tran

(Print name) Title:

Product Development Engineer On behalf of:

Conductix-Wampfler

(Company Name) Telephone:

(402) 339-9300 x434

Conductix-Wamplfer 10102 F. Street Omaha, NE 68127 402-339-9300 Date: November 25th, 2020 To:

Federal Communications Commission 45 L Street NE Washington, DC 20554 FCC ID:

2ASM6-CXWA Sincerely, Hau Tran Company: Conductix, Inc Address: 10102 F Street, Omaha NE, 68138 Title: Director of Engineering, US CoE Integrated RF Module: Texas Instruments CC2640R2FRGZR wireless MCU To whom it may concern:

This letter is to confirm that Conductix, Inc (d.b.a. Conductix-Wampfler) has integrated an FCC CFR47 Part 15 compliant RF module into our host product, under the VersaReel Blue product family. Conductix has and will maintain complete control over all product integrations and installations. The final host product has been tested for spurious emissions and we have ensured that the data to the module is buffered in all applications. Should you have any questions or commented regarding this declaration, please contact us.

Date: October 27, 2020 Subject: Confidentiality Request for:

Request for Confidentiality FCC ID: 2ASM6-CXWA IC: 11769A-CXWA Pursuant to FCC 47 CFR 0.457(d) and 0.459 and IC RSP-100, Section 9.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Not Provided Permanent Not Provided Permanent Not Provided Not Provided Permanent Not Provided Permanent Permanent Not Provided Not Provided Permanent Not Provided Permanent Not Provided Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual The above-mentioned company has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality (if applicable): NA The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public before the requested period has expired. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-

1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered Provided to IC applications Sincerely, By:

__________________________ Nic Johnson, Technical Manager, NCEE Labs Page 1 of 1

THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Request for Modular/Limited Modular Approval Date: January 12, 2021 Subject: Manufacturers Declaration for - Modular Approval Confidentiality Request for: 2ASM6-CXWA

- Limited Modular Approval - Limited Split Modular Approval

- Split Modular Approval For Items Marked NO(*), the Limited Module Description Must be Filled Out on the Following Pages Modular Approval Requirement Requirement Met 8 Basic Requirements FCC Part 15.212(a)(1) 1. The modular transmitter must have its own RF shielding. This is intended to ensure that the module does not have to rely upon the shielding provided by the device into which it is installed in order for all modular transmitter emissions to comply with FCC limits. It is also intended to prevent coupling between the RF circuitry of the module and any wires or circuits in the device into which the module is installed. Such coupling may result in non-compliant operation. The physical crystal and tuning capacitors may be located external to the shielded radio elements. 15.212(a)(1)(i) Details: The module will not have a shield. Installation will be under full control of the manufacture and it will be installed in their own products only. The end products will be tested for spurious emissions in each case. 2. The modular transmitter must have buffered modulation/data inputs (if such inputs are provided) to ensure that the module will comply with FCC requirements under conditions of excessive data rates or over-modulation. 15.212(a)(1)(ii) Details: Data inputs are not buffered, but will be controlled by the manufacturer in the final installation.

- YES - NO(*)

- YES - NO(*) 3. The modular transmitter must have its own power supply regulation on the module. This is intended to ensure that the module will comply with FCC requirements regardless of the design of the power supplying circuitry in the device into which the module is installed. 15.212(a)(1)(iii)

- YES - NO(*) Details: The power inputs are regulated 4. The modular transmitter must comply with the antenna and transmission system requirements of 15.203, 15.204(b), 15.204(c), 15.212(a), and 2.929(b). The antenna must either be permanently attached or employ a unique antenna coupler (at all connections between the module and the antenna, including the cable). The professional installation provision of 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph 15.212(b). 15.212(a)(1)(iv) Details: The module features a PCB trace antenna 5. The modular transmitter must be tested in a stand-alone configuration, i.e., the module must not be inside another device during testing. This is intended to demonstrate that the module is capable of complying with Part 15 emission limits regardless of the device into which it is eventually installed. Unless the transmitter module will be battery powered, it must comply with the AC line conducted requirements found in Section 15.207. AC or DC power lines and data input/output lines connected to the module must not contain ferrites, unless they will be marketed with the module (see Section 15.27(a)). The length of these lines shall be length typical of actual use or, if that length is unknown, at least 10 centimeters to insure that there is no coupling between the case of the module and supporting equipment. Any accessories, peripherals, or support equipment connected to the module during testing shall be unmodified or commercially available (see Section 15.31(i)). 15.212(a)(1)(v) Details: The module was tested in a representative configuration

- YES - NO(*)

- YES - NO(*) 070920-02b THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD 6. The modular transmitter must be labeled with its own FCC ID number, or use an electron display Modular Approval Requirement Requirement Met

(see KDB Publication 784748). If using a permanently affixed label with its own FCC ID number, if the FCC ID is not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains Transmitter Module FCC ID: XYZMODEL1 or Contains FCC ID: XYZMODEL1. Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. If the modular transmitter uses an electronic display of the FCC identification number, the information must be readily accessible and visible on the modular transmitter or on the device in which it is installed. If the module is installed inside another device, then the outside of the device into which the module is installed must display a label referring to the enclosed module. This exterior label can use wording such as the following: Contains FCC certified transmitter module(s). Any similar wording that expresses the same meaning may be used. The user manual must include instructions on how to access the electronic display. A copy of these instructions must be included in the application for equipment authorization. 15.212(a)(1)(vi) Details: The label will be permanently affixed on the module. 7. The modular transmitter must comply with all specific rule or operating requirements applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. A copy of these instructions must be included in the application for equipment authorization. For example, there are very strict operational and timing requirements that must be met before a transmitter is authorized for operation under Section 15.231. For instance, data transmission is prohibited, except for operation under Section 15.231(e), in which case there are separate field strength level and timing requirements. Compliance with these requirements must be assured. 15.212(a)(1)(vii) Details: Instructions are included in the users manual for application of label on end device. 8. The modular transmitter must comply with any applicable RF exposure requirements. For example, FCC Rules in Sections 2.1091, 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with Section 15.247(b)(4). Modular transmitters approved under other Sections of Part 15, when necessary, may also need to address certain RF Exposure concerns, typically by providing specific installation and operating instructions for users, installers and other interested parties to ensure compliance. 15.212(a)(1)(viii) Details: The module is categorically excluded for RF exposure requirements.

- YES - NO(*)

- YES - NO(*)

- YES - NO(*) 070920-02b THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Limited Module Description When Applicable

* If a module does NOT meet one or more of the above 8 requirements, the applicant may request Limited Modular Approval (LMA). This Limited Modular Approval (LMA) is applied with the understanding that the applicant will demonstrate and will retain control over the final installation of the device, such that compliance of the end product is always assured. The operating condition(s) for the LMA; the module is only approved for use when installed in devices produced by grantee. A description regarding how control of the end product, into which the module will be installed, will be maintained by the applicant/manufacturer, such that full compliance of the end product is always ensured should be provided here. Details: The module will not have a shield. Installation will be under full control of the manufacture and it will be installed in their own products only. The end products will be tested for spurious emissions in each case. Software Considerations KDB 594280 / KDB 442812 (One of the following 2 items must be applied) Requirement Requirement Met 1. For non-Software Defined Radio transmitter modules where software is used to ensure compliance of the device, technical description must be provided about how such control is implemented to ensure prevention of third-party modification; see KDB Publication 594280. Details: <example The firmware of the device can not be modified or adjusted by the end user as described in a separate cover letter filed with this application. >

Cover Letter

- Provided in Separate

- N/A 2. For Software Defined Radio (SDR) devices, transmitter module applications must provide a software security description; see KDB Publication 442812.

- Provided in Separate Cover Letter

- N/A Details: <example N/A>

Split Modular Requirements Requirement Provided in Manual 1. For split modular transmitters, specific descriptions for secure communications between front-end and control sections, including authentication and restrictions on third-party modifications; also, instructions to third-party integrators on how control is maintained. Details: <example N/A >

- Provided in Separate Cover Letter

- N/A 070920-02b THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD Requirement OEM Integration Manual Guidance KDB 996369 D03 Section 2 Clear and Specific Instructions Describing the Conditions, Limitations, and Procedures for third-parties to use and/or integrate the module into a host device. Is this module intended for sale to third parties?

- YES

- No, If No, and LMA applies, the applicant can optionally choose to not make the following detailed info public. However there still needs to be basic integration instructions for a users manual and the information below must still be included in the operational description. If the applicant wishes to keep this info confidential, this will require a separate statement cover letter explaining the module is not for sale to third parties and that integration instructions are internal confidential documents. Items required to be in the manual See KDB 996369 D03, Section 2 As of May 1, 2019, the FCC requires ALL the following information to be in the installation manual. Modular transmitter applicants should include information in their instructions for all these items indicating clearly when they are not applicable. For example information on trace antenna design could indicate Not Applicable. Also if a module is limited to only a grantees own products and not intended for sale to third parties, the user instructions may not need to be detailed and the following items can be placed in the operational description, but this should include a cover letter as cited above. 1. List of applicable FCC rules. KDB 996369 D03, Section 2.2 a. Only list rules related to the transmitter. 2. Summarize the specific operational use conditions. KDB 996369 D03, Section 2.3 a. Conditions such as limits on antennas, cable loss, reduction of power for point to point 3. Limited Module Procedures. KDB 996369 D03, Section 2.4 systems, professional installation info a. Describe alternative means that the grantee uses to verify the host meets the necessary limiting conditions b. When RF exposure evaluation is necessary, state how control will be maintained such that compliance is ensured, such as Class II for new hosts, etc. 4. Trace antenna designs. KDB 996369 D03, Section 2.5 a. Layout of trace design, parts list, antenna, connectors, isolation requirements, tests for design verification, and production test procedures for ensuring compliance. If confidential, the method used to keep confidential must be identified and information provided in the operational description. 5. RF exposure considerations. KDB 996369 D03, Section 2.6 a. Clearly and explicitly state conditions that allow host manufacturers to use the module. Two types of instructions are necessary: first to the host manufacturer to define conditions (mobile, portable xx cm from body) and second additional text needed to be provided to the end user in the host product manuals. 6. Antennas. KDB 996369 D03, Section 2.7 a. List of antennas included in the application and all applicable professional installer instructions when applicable. The antenna list shall also identify the antenna types

(monopole, PIFA, dipole, etc note that omni-directional is not considered a type) 7. Label and compliance information. KDB 996369 D03, Section 2.8 a. Advice to host integrators that they need to provide a physical or e-label stating Contains FCC ID: with their finished product 8. Information on test modes and additional testing requirements. KDB 996369 D03, Section 2.9 a. Test modes that should be taken into consideration by host integrators including clarifications necessary for stand-alone and simultaneous configurations. b. Provide information on how to configure test modes for evaluation 9. Additional testing, Part 15 Subpart B disclaimer. KDB 996369 D03, Section 2.10

- All Items shown to the left are provided in the Modular Integration Guide (or UM) for Full Modular Approval

(MA) or LMA.

- An LMA applies and is approved ONLY for use by the grantee in their own products, and not intended for sale to 3rd parties as provided in a separate cover letter. Therefore the information shown to the left is found in the theory of operation. Sincerely, By:

070920-02b __________________________

(Signature/Title1) _Nic Johnson__________________

(Print name) 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.