Functional description of testsetup Project BR213 , FCC ID:2ACC7RKE213E1 Functional Description of testsetup (RKE213E1) Taiwan A. Stuffer / CEE 1 30.06.2015 Functional description of testsetup Project BR213 1 1 1 1 1 1 1 1 RKE-Screenantenna RKE213 Testbox with data-cable RKE-Key RKE_Sample_Application-Mode RKE_Sample_CW-mode_CH1 (433,47 MHz) RKE_Sample_CW-mode_CH2 (434,37 MHz) RKE_Sample_CW-mode_CH3 (433,92 MHz) A. Stuffer / CEE 2 30.06.2015 Functional description of testsetup Project BR213 2 Screenantenna as-delivered Assemble the pedestal (screws are implemented on the antenna-frame) A. Stuffer / CEE 3 30.06.2015 Functional description of testsetup Project BR213 3 - Plug the RKE-sample (CW- or Application-sample) to the antenna-interface Tighten the mounting-screw 4 A. Stuffer / CEE 30.06.2015 Functional description of testsetup Project BR213 Plug the data-cable in the antenna-interface Connect the data-cable with the RKE-Testbox (DATA I/O) Supply the RKE-Testbox with +12 Volt
(+12V | GND | Current consumption < 100 mA) A. Stuffer / CEE 5 30.06.2015 Functional description of testsetup Project BR213 4 - Take care: Works only with CW-sample on Testsetup!
CW-mode: no LED is burning A. Stuffer / CEE 6 30.06.2015 Functional description of testsetup Project BR213 5 -- Take care: Works only with Application-sample on Testsetup!
polling-mode: the green STATE LED is burning
-> RKE-Reception is OK Press any button at the RKE-Key A. Stuffer / CEE 7 30.06.2015 Functional description of testsetup Project BR213 6 - Take care: Works only with Application-sample on Testsetup!
-button
CH SEL-button until your desired CH is aktive In this case: Tx-mode with CH 1 (433,47 MHz) Tx-mode with CH 2 (434,37 MHz) Tx-mode with CH 3 (433,92 MHz) A. Stuffer / CEE 8 30.06.2015 Product information radio frequency transmitter Taiwan NCC Warning Statement Article 12 Without permission, any company, firm or user shall not alter the frequency, increase the power, or change the characteristics and functions of the original design of the certified lower power frequency electric machinery. Article 14 The application of low power frequency electric machineries shall not affect the navigation safety nor interfere a legal communication, if an interference is found, the service will be suspended until improvement is made and the interference no longer exists. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.