all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual | Users Manual | 3.68 MiB | ||||
1 2 | Cover Letter(s) | |||||||
1 2 | External Photos | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Report | |||||||
1 2 | External Photos | |||||||
1 2 | Internal Photos | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Cover Letter(s) | |||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Report |
1 2 | User Manual | Users Manual | 3.68 MiB |
www.vdoroadlog.com RoadLog Owners Manual Version 1.3 Includes Instructions on:
Fleet Management Software RoadLog Installation RoadLog Operation Table of Contents Table of Contents Table of Contents Introduction ................................................................................. 5 The RoadLog device is used in conjunction with: ...................... 5 Getting Started ......................................................................... 5 Chapter 1: VDO RoadLog Fleet Management Software ..........................................................6 1. Managing your Fleet with the VDO RoadLog System....... 7 2. Getting Started ...................................................................... 8 System Requirements ............................................................... 8 Activating the RoadLog Fleet Management Software ................. 9 Software Installation .................................................................. 9 3. Navigating RoadLog Fleet Management Software:
First Look .............................................................................. 13 The Quick Start Screen: ......................................................... 13 The Navigation Buttons: ......................................................... 13 The Action Palettes: ................................................................ 14 4. Navigating work area Screens and Tabs............................ 15 Viewer Screen ......................................................................... 15 HOS Tab: ............................................................................... 15 IFTA/IRP Tab: .......................................................................... 15 DVIR Tab: ................................................................................ 15 Supporting Documents Tab: .................................................... 15 Speed Graph Tab: ................................................................... 16 Events Tab: ............................................................................. 16 Report Screen ......................................................................... 16 Supporting Documents Screen ............................................... 16 Drivers / Vehicles ..................................................................... 17 Driver Profile Tab: .................................................................... 17 Trailer Assignments Tab: .......................................................... 17 Shipping Assignments Tab: ..................................................... 17 Company Configuration Screen............................................... 18 Company Tab: ........................................................................ 18 Shipping Documents Tab: ....................................................... 18 Supporting Documents Tab: .................................................... 18 Annotations Tab: ..................................................................... 19 Fuel Vendor List Tab: ............................................................... 19 Fuel Types Tab: ....................................................................... 19 Asset Part List Tab: ................................................................. 20 Application Tab: ...................................................................... 20 Support .................................................................................. 20 5. Creating and working with Driver Keys ................................................................... 21 Creating Drivers ...................................................................... 21 Creating a Driver Profile ........................................................... 21 6. Transferring data .................................................................. 23 Uploading Driver data to the Fleet Management Software ....... 23 Exporting to RoadLog ............................................................. 23 7. Screens & Tabs: Features & Functions .............................. 24 Viewer Screen HOS Tab ....................................................... 24 Events Grid ............................................................................ 25 Map View and IFTA / IRP Tabs ................................................. 27 DVIR Tab ................................................................................. 27 Exporting DVIRs to RoadLog................................................... 29 Importing DVIRs from RoadLog ............................................... 29 Supporting Documents Tab ..................................................... 29 Speed Graph Tab ................................................................... 30 This functionality will be introduced in 2013. ........................... 30 Events Tab .............................................................................. 30 Report Screen ......................................................................... 31 DVIR Status Report ................................................................. 31 HOS Download Reminder Report ............................................ 32 IRP Driven Miles and IRP Vehicle List Reports ......................... 32 Vehicle Trip Report .................................................................. 32 Supporting Documents Screen ............................................... 33 Drivers / Vehicles Screen ......................................................... 33 Driver Tab ............................................................................... 34 Vehicle Screen ........................................................................ 35 Creating Trailers ...................................................................... 37 Trailer Screen .......................................................................... 38 Trailer Assignments Tab ........................................................... 38 Shipping Assignments Tab ...................................................... 39 Company Configuration Screen............................................... 40 Company Tab ......................................................................... 40 Creating Shipping Documents ................................................. 42 Supporting Documents Tab .................................................... 42 Annotations Tab ...................................................................... 43 Fuel Vendor List Tab ................................................................ 43 Fuel Types Tab ........................................................................ 43 Asset Part List Tab .................................................................. 44 Application Tab ....................................................................... 45 Support Screen ....................................................................... 46 Update RoadLog Software ...................................................... 46 Update RoadLog Fleet Management Software ........................ 46 Start Remote Control (FastViewer) ........................................... 46 Technical Support ................................................................... 46 Collect Software Diagnostics ................................................... 47 Adding Vehicle Licenses .......................................................... 47 Purging old data ..................................................................... 48 Replacing Lost or Damaged RoadLog Keys ............................ 48 8. Resolving Conflict Files ....................................................... 49 9. Backing up your RoadLog Data .......................................... 50 Chapter 2: VDO RoadLog Installation ..................................................... 51 1. VDO RoadLog Installation ............................................... 51 1. Make sure you have the correct Installation Kit! ................... 52 2. Choose your Mounting Option. .......................................... 52 3. Choose your Mounting Location. ....................................... 53 4. Attach your Bracket or Mount. ........................................... 53 5. Prepare the RoadLog. ........................................................ 53 6. Connect Cable. .................................................................. 54 7. Install RoadLog into Mount. ............................................... 54 8. Load Paper Roll. ................................................................ 54 9. Compliance Sticker. ........................................................... 54 Instructions for Open End Basic Cable ................................. 55 6-pin and 9-pin Wiring Configurations ..................................... 56 OBDII Vehicle Connector ......................................................... 56 Chapter 3: VDO RoadLog Operation .............. 57 1. VDO RoadLog Fundamentals .............................................. 57 Operating RoadLog: ............................................................... 58 On/Off Button and Operation Modes ....................................... 60 USB Connector....................................................................... 60 Printer .................................................................................... 61 GPS Antenna / Connector ..................................................... 61 Connector Cables ................................................................... 61 Battery .................................................................................... 62 Touch Screen Display ............................................................. 62 System Icons .......................................................................... 62 2. First Device Start Up After Installation Into Vehicle .......... 63 3. Company Log In ................................................................... 64 4. Configuration Parameters ................................................... 65 Setting Configuration Parameters ............................................ 65 Setting the Vehicle Synchronization Parameter ........................ 66 Setting the Vehicle Synchronization Parameter Automatically ... 67 Setting the Vehicle Synchronization Parameter Manually .......... 67 Setting the Vehicle Odometer Parameter ................................. 68 Setting the Vehicle Identification Number (VIN)......................... 69 Setting the Wake up condition ................................................ 69 Setting the Vehicle Type .......................................................... 70 Setting the Printing Speed....................................................... 71 Setting the W Factor ............................................................... 72 Saving new Configuration Parameters to the Fleet Key ............ 74 5. The User Settings Menu ...................................................... 75 Adjusting Illumination .............................................................. 75 Change Language .................................................................. 75 Diagnostic Functions ............................................................... 76 About RoadLog Device Information ...................................... 76 6. Daily Operations ................................................................... 77 Driver Log In ........................................................................... 77 Enter your Status .................................................................... 78 If you are not the first Driver to Log In: ..................................... 79 Manual Log In ......................................................................... 80 Manual Location Entry ............................................................ 81 Performing DVIRs at Log In and Log Out ................................. 81 The Driver Overview Options Screen: ..................................... 82 Company Data Transfer .......................................................... 83 Update the Company Assets File ........................................... 84 Upload the Company Support Data Lists ................................ 84 Data Download to a normal USB Flash Drive ......................... 84 Change Status ........................................................................ 85 Status Lock ............................................................................ 85 View Logs (Grid) ...................................................................... 86 View Logs (Details) .................................................................. 86 Event Details ........................................................................... 87 Driver Log Out ........................................................................ 88 Data Download at Driver Log Out ............................................ 89 7. Trailer management ............................................................. 90 Adding a Trailer ....................................................................... 90 Removing a Trailer ................................................................... 91 8. Shipment Documents management ................................... 92 9. Supporting Documents ....................................................... 93 Generating a Supporting Document Automatically ................... 93 Generating a Supporting Document Manually.......................... 94 10. Vehicle Inspection Reports: Creating DVIRs ..................... 96 Performing DVIRs.................................................................... 96 Pre-trip Inspection ................................................................... 96 Creating a Pre-trip DVIR .......................................................... 96 Creating a Post-trip DVIR ........................................................ 97 Assigning Defects to a Part in the DVIR ................................... 98 DVIR Summary ..................................................................... 100 Printing a DVIR ..................................................................... 100 Viewing Driver Vehicle Inspection Reports (DVIR) ................... 101 11. Enabling/Disabling Exemptions ....................................... 102 Automatic deactivation of Exemptions ................................... 102 Disabling the 100 or 150 Air-miles Radius Exemptions .......... 103 12. Adding a Pre-Trip or Post-Trip Activity ............................ 104 13. Performing a Roadside Inspection .................................. 105 Retrieving and Printing DVIR Reports .................................... 105 Retrieving, Printing and Transferring HOS logs....................... 106 14. Company Log Out from RoadLog ................................... 107 15. Software Updates .............................................................. 108 16. Diagnostic Warning Screens ............................................ 109 17. RoadLog Files .................................................................... 129 Company-Related Files (Fleet Management Software Files) ... 129 Company Identification File ................................................... 129 Company Tractor List File ...................................................... 130 Company Support Data File .................................................. 130 Company Vehicle Activities Data File ..................................... 130 Company Vehicle DVIR Data File ........................................... 130 Company Configuration Session File ..................................... 131 Company Assets Parts List File ............................................. 131 Device Related Files .............................................................. 131 Device Configuration Parameters Data .................................. 131 Device Diagnostic Events Data .............................................. 132 Vehicle Data .......................................................................... 132 Device Software Update History File ...................................... 133 Driver Related Files ............................................................... 133 Driver Identification Data File ................................................. 133 Driver Support Data File ........................................................ 133 Driver RODS Binary Data File ................................................ 134 Driver RODS Text Data File .................................................... 134 Printouts ............................................................................... 135 Daily Log ............................................................................... 136 DVIR Report .......................................................................... 137 Supporting Document ........................................................... 138 18. Support / Warranty ............................................................ 142 19. Glossary ............................................................................. 143 20. Legal Notices ..................................................................... 145 2 3 DOT Certificate of Compliance Introduction Introduction Continental Automotive Systems US, Inc. CERTIFICATE OF COMPLIANCE DEPARTMENT OF TRANSPORTATION REGULATIONS The VDO RoadLog electronic logging system has been sufficiently tested, under the conditions in which it will be used, to meet or exceed the requirements of section 49 CFR 395.15 of the United States Federal Motor Carrier Safety Regulations in effect at the time of its manufacture. This VDO RoadLog electronic logging system can be used to record, transfer and archive all hours of service data as required by the United States Department of Transportation Federal Motor Carrier Safety Administration as of the date of its manufacture. Authorized by Ekkehard Kraemer Head of Finance and Quality Tachographs, Telematics and Services Commercial Vehicles & Aftermarket Introduction VDO RoadLog is the simple, affordable, all-in-one solution for automated daily log book and compliance reporting. It provides cost-effective HOS monitoring that you can have up and running in minutes. RoadLog was designed to keep Drivers in compliance with all FMSCA regulations by recording data for:
Hours-of-Service (HOS) Driver Vehicle Inspection Reports (DVIR) International Fuel Tax Agreement (IFTA)
(This feature will be implemented in an upcoming release) International Registration Plan (IRP)
(This feature will be implemented in an upcoming release) RoadLog Fleet Software is designed to enable Fleet Managers and Owner /
Operators to collect and archive driver data to maintain compliance with FMSCA regulations and to help manage trucking operations more efficiently. RoadLog is used in conjunction with:
RoadLog Fleet Management Software The Fleet Management Software allows the Fleet Manager or Owner / Operator to collect and archive Driver data, make notes in the Driver data and prepare reports on Driver history. RoadLog Fleet Key The RoadLog Fleet Key USB flash drive is used to log in to the RoadLog Fleet Software. The Fleet Key can also be used to download and upload data to and from RoadLog. Each company must have at least one Fleet Key and the RoadLog Fleet Management Software. RoadLog Driver Key The RoadLog Driver Key USB flash drive is used by the Driver to log in and out of RoadLog and to transfer data. Getting Started To set up your VDO RoadLog, youll follow these steps:
1. Install the RoadLog Fleet Software. 2. Activate the RoadLog Fleet Key. 3. Set up your Company and Drivers in the RoadLog Fleet Software. 4. Install RoadLog in your Vehicle. 5. Download and upload Driver data. Fleet Key Driver Key 4 5 Managing your Fleet with the VDO RoadLog System Chapter 1:
VDO RoadLog Fleet Management Software 1. Managing your Fleet with the VDO RoadLog System VDO RoadLog was designed to allow Drivers, Fleets and Owner Operators to record and report Hours of Service
(HOS), Driver Vehicle Inspection Reports (DVIR), Fuel Tax Reporting and other data quickly and easily, and without monthly fees. VDO RoadLog Fleet Management Software lets you collect and manage that data to ensure that your fleet complies with regulations. By having accurate data on hand, Fleet Managers and Owner Operators can see if they are operating within regulations, and where changes need to be made to improve efficiency and increase profits. RoadLog eliminates the chance of manual logbook entry errors that can result in big fines. RoadLog printouts provide all the information that a manual log provides and more, but RoadLog is faster, easier and more accurate, for both the Driver and the Compliance Officer. The VDO RoadLog Fleet Management Software generates accurate, up-to-date reports far quicker than paper-based methods, saving time and money. RoadLog Fleet Management Software can manage an unlimited number of Drivers and trucks. And, since the RoadLog Fleet Management Software is a one-time purchase, it represents an excellent value compared to subscription-
based solutions. RoadLog records a range of data that helps make trucking operations safer and more efficient:
Hours-of-Service (HOS) according to US rules Driver Vehicle Inspection Reports (DVIR) according to US rules International Fuel Tax Agreement (IFTA) International Registration Plan (IRP) RoadLogs software is flexible and up-dateable to meet anticipated DOT compliance requirements. Free upcoming software updates will include:
Hours-of-Service (HOS) according to Canadian rules Vehicle Inspection and Repair Maintenance (DVIR) according to Canadian rules Compliance with Alaska and oilfield rules Entry errors in traditional paper logbooks interfere with your asset tracking and operations planning. They can also lead to big fines! The RoadLog system is faster, easier and more accurate, for both the Driver and the fleet manager or compliance officer. Permission to access data from RoadLog and the Fleet Management Software is possible only with the Driver Key or Fleet Key USBs, so that data is fully protected and tamper resistant, to ensure data integrity and data privacy. VDO RoadLog Fleet Management Software is used in conjunction with:
VDO RoadLog the in-vehicle device that records vehicle and Driver activities. VDO RoadLog Driver Key a proprietary USB drive that allows Drivers to log in to RoadLog and that is used to transfer data between RoadLog and the PC that is running the Fleet Management Software. The Driver Key can also transfer Driver data between vehicles, if the Driver uses different vehicles through out the workday/workweek. The Driver Key can also enable use of a limited feature set of the Fleet Management Software. VDO RoadLog Fleet Key a proprietary USB drive that is required to log in to the Fleet Management Software, assuring the integrity and authenticity of your RoadLog data files. The Fleet Key and Driver Keys are also used to transfer data between the PC that is running the Fleet Management Software and the RoadLog device. Driver Key Fleet Key 6 7 Getting Started Getting Started 2. Getting Started System Requirements VDO RoadLog Fleet Management Software requires:
A PC with Windows 8, Windows 7, Windows Vista with Service Pack 2, or Windows XP with Service Pack 3. Adobe PDF Reader (or any software that allows reading of PDFs). An Internet connection. Two open USB ports. A CD drive. 400 MB of free hard drive space. PC OPERATING SYSTEM REQUIREMENTS -
32 BIT Versions PC OPERATING SYSTEM REQUIREMENTS -
64 BIT Versions Windows XP (SP3) Windows XP (SP3) Windows VistaSP2 Enterprise Windows 7 Ultimate Windows VistaSP2 Ultimate Windows 7 x64 Home Premium Windows VistaSP2 Home Basic Windows 7 x64 Home Basic Windows 7 x64 Enterprise Windows 7 x64 Professional Windows 8 Consumer Windows 8 Professional Windows 8 Enterprise Windows VistaSP2 Home Premium Windows VistaSP2 Business Windows 7 Ultimate Windows 7 Home Premium Windows 7 Home Basic Windows 7 Enterprise Windows 7 Professional Windows 8 Consumer Windows 8 Professional Windows 8 Enterprise NOTE: PostgreSQL 9.0 Database supported for all Operating Systems. The installer will check to see if the PostgreSQL database is installed on the machine. If it is not installed, setup will automatically install it. Activating the RoadLog Fleet Management Software In order to use the RoadLog Fleet Management Software, you will need to install the Software and activate the VDO RoadLog Fleet Key. Whenever you use the Fleet Management Software, an activated VDO Fleet Key or VDO Driver Key must be inserted in the PC. If the Fleet Key is not already activated, it can be activated by filling the data in the Company window that appears after installation of the RoadLog Fleet Software application. The application connects to the VDO Internet portal. The company will be registered, and the PC will receive a download of the CID file for the activation of the Fleet key. Note: The activation described here requires an Internet connection. If you do not have an Internet connection, see Activating Your Fleet Key through the RoadLog Portal for how to activate the Fleet Key using Internet access from another PC. Software Installation 1. Insert the Fleet Key into a USB port on your PC. 2. Insert the Fleet Management Software CD into the PC. When the CD appears, double click the setup.exe file. The Fleet Management Software installation will start. 3. Follow the InstallShield Wizard prompts, and make all the required user choices. While running the InstallShield Wizard, there is an option to choose a Client/Server installation.
> If you select Complete installation, all parts of the application
(database, client application, etc.) will be installed on one computer. This option is selected by default.
> If you select Client installation, only the client portions
(application, JRE, etc.) will be installed.
> If the user selects Server installation, only the server parts will be installed.
> If Client installation is selected, you will be prompted for a database server name / address. You will also have to enter the US DOT Number for the company.
> If there is a PostgreSQL database already installed, you will have to enter the admin password. 8 9 Getting Started Getting Started Note: The installer will check to see if PostgreSQL database is installed on the machine. If it is not installed, the setup will automatically install it. You may see a message(s) indicating that there are software updates available. Click Yes to allow installation of the updates. When you see the Fleet Key Activation screen, enter your company information in the fields shown. Be careful to enter the information accurately once saved, the US DOT number cannot be changed. We recommend using an email address that all users will have access to, for example: manager@your_company.com. Youll need to know your company data, including your US DOT Number. The serial number of the Fleet Key will be read from the Key and entered into the field automatically. When the information entry is completed, click Save. The software will automatically activate your Fleet Key (this may take several minutes - again, Internet access is required). When the activation is complete, your Fleet Key will be activated. The Fleet Manager Software will start up automatically, and a RoadLog Fleet Management Software shortcut icon will appear on your desktop. To start the RoadLog Fleet Management Software, double click on this shortcut icon. Activating your Key will create a Company account for you on the RoadLog User Portal (www.vdoroadlog.com/user). You will be able to use this account to purchase additional RoadLog Fleet Keys and Vehicle licenses when you need them. 4. At first start up, no Driver data will be present. Youll need to complete your Company and Driver profiles, create Trailers and Tractors and export the data to the Fleet Key and Driver Key(s). Then, youll be ready to log your Company in on your RoadLog(s) with the Fleet Key and then have your Driver(s) begin using the system. When the Driver(s) return from driving with data from RoadLog, you will be able to download the data from the Driver Key(s), view Driver activities and manage Driver records. Note: You will be notified by e-mail when software updates are available. If you do not have Internet access from the PC where youll use the Fleet Management Software, you must make arrangements to get the software updates. Software updates may be necessary to maintain compliance with changes to the FMCSA regulations. Updates will be available on the VDO RoadLog web portal:
www.vdoroadlog.com/user When the Fleet Management Software starts up and the Fleet Key is authenticated, youll see the Quick Start Screen. The Quick Start Screen provides shortcuts to create Drivers, Tractors, Trailers and Supporting Documents, as well as import and export data. Instructions on how to perform each of these steps are featured below. Create Driver Create Tractor Create Trailer Create Documents Import to RoadLog Export to RoadLog Important note: It is recommended to read the instructions prior to using this software. However, some users may choose to create these entries before reading this manual completely. If you are going to immediately create entries, please read Backing Up Your RoadLog Data and follow the guidance there to ensure that the results of your work are secure. Activating your Fleet Key through the RoadLog Portal If your computer is not able to connect to the Internet and the RoadLog Portal, the Fleet Management Software will not be able to download the
.CID file needed to activate your Fleet Key. If this is the case, you must use a computer that can connect to the RoadLog Portal and use the Portal to manually register your company and activate your Fleet Key. You will also need an email account that you can access from the Internet-connected computer. To perform a manual registration and .CID file download:
Insert the Fleet Key into a USB port on the Internet-connected PC. Using the PCs Internet browser, go to the RoadLog User Portal at www.vdoroadlog.com/user and click on Register. Enter your company information in the fields shown. Youll need to know your company data, including your US Department of Transportation (DOT) number and the serial number of the Fleet Key. This serial number is available on the package of the Fleet Key and in the file KEY_DATA.txt on the root directory of the Fleet Key. Once you enter your registration information, an email with a download link will be sent to the email address that you registered with. Click on the link to begin the download. Save the download as a file in your Documents folder. The downloaded file, with the extension .CID, is your Company ID registration file. Copy this file to your Fleet Keys Company folder. You can now use your Fleet Key to launch the Fleet Management Software as described above in Software Installation. 10 11 Getting Started Navigating RoadLog Fleet Management Software: First Look Note: The .CID file is unique to your Fleet Key. It will not work with other Fleet Keys or with generic USB flash drives. The activated Fleet Key must be plugged into a USB port on the computer for the Fleet Management Software to run. Adding additional Fleet Keys You may wish to have more than one Fleet Key for your company. Additional Fleet Keys can be purchased from VDO RoadLog retailers or by contacting RoadLog Customer Support:
Customer Support Email: roadlog-support@vdo.com Tel.: (855) ROADLOG, or (855) 762-3564 Fax: (800) 752-7224 or (610) 366-9837 Customer service is available 8:00 am 5:00 pm EST IMPORTANT: All additional Fleet Keys purchased for your company must be activated using the same US DOT number and company address as the original Fleet Key, or the new Fleet Key cannot be used with your original company file. 3. Navigating RoadLog Fleet Management Software:
First Look The RoadLog Fleet Management Software four main elements:
The Quick Start Screen:
This floating layer is seen at the first start up and it is designed to help you through your initial software configuration and to enable easy access to common tasks at start up. The Quick Start Screen includes buttons that allow you to quickly create Drivers, Tractors, Trailers, and Supporting Documents, as well as to import data from your RoadLog device and export data to RoadLog. Note: If you dont want the Quick Start Screen to appear at start up, check the box Dont show again in the Screen. The Navigation Buttons:
Seen at the lower left, the Navigation Buttons select among the various screens designed for different activities. The Navigation Buttons include:
Viewer: For viewing tabs that show Driver logs and records associated with their activities. Report: For viewing various reports reflecting the status of Drivers, Vehicles and IRP information. Supporting Documents: For viewing Supporting Documents, which are records created by the Driver to document activities during trips such as meals, fueling and vehicle maintenance. Drivers / Vehicles: For creating and viewing Driver profiles and assignments of tractors and shipments made to each Driver. Company Configuration: For creating and viewing the company profile as well as creating Shipping Documents, Supporting Document Categories, frequently used Annotations, pre-
established Fuel Vendors and Fuel Types, and Asset Part Names. In addition, the Company Configuration screen includes the Application tab for configuring the VDO Fleet Management Software user preferences. 12 13 Navigating RoadLog Fleet Management Software: First Look Navigating work area Screens and Tabs The Action Palettes:
Seen at the upper left, the Action Palette provides access to the frequently used actions. The options shown in the Action Palette change, depending on which Navigation button is active. Support Action Palette:
When the Support Navigation Button is active, the Action Palette is inactive, and shows only the Company icon. Viewer Action Palette:
The Work Area:
The Work Area displays the tabbed screens and fields youll work in. The screens seen here change according to which of the Navigation Buttons is active and which tab youve clicked on. Note: As with the Company icon mentioned above, you can change the icons for Driver, Trailer or Vehicle, to images of your choosing. Create your icon at 75 x 75 pixels. Click on the icon you wish to replace and choose your icon from the dialog box that appears. When the Viewer Navigation Button is active, the Action Palette shows the interactive calendar used to select dates youll view and buttons to import or export data from or to a icon at the top of RoadLog Fleet Key or Driver Key. The the Action Palette toggles to reveal the list of all Drivers that have been created for the company. You may also select the Driver or vehicle from the drop-down menu. The Show Original Data check box will cause the HOS tab screen to show original data automatically recorded by the RoadLog device rather than data that was manually edited by a RoadLog Fleet Management Software user. Report Action Palette:
When the Report Navigation Button is active, the Action Palette is inactive and shows only the Company icon. You may use the default Company Icon, or if you wish, you can change the Company icon to an image of your choosing, such as your logo, by clicking on it. Supporting Documents Action Palette:
When the Supporting Documents Navigation Button is active, the Action Palette shows timeline selectors that define the time period from which you will see recorded Supporting Documents. The Display only new entries checkbox will cause the software to display only newly recorded entries. Drivers / Vehicles Action Palette:
When the Drivers / Vehicles Navigation Button is active, the Action Palette shows buttons to create Drivers, vehicles and trailers as well as buttons to import or export data from or to a RoadLog Fleet Key or Driver Key. The reveal the list of all Drivers that have been created for the company. icon at the top of the Action Palette toggles to Company Configuration Action Palette:
When the Company Configuration Navigation Button is active, the Action palette shows buttons to import or export data from or to a RoadLog Fleet Key or Driver Key. 4. Navigating work area Screens and Tabs The easiest way to understand the Fleet Softwares capabilities is to review the screens and their tabs functions. An overview of the functions of each section is described below; a detailed explanation of how to work in the screen and tabs is provided in Screens & Tabs: Features & Functions. Viewer Screen HOS Tab:
View, edit and print Driver HOS data in logbook, tabular and map form. View start/end times for Events, Violations, Exemptions and Supporting Documents. View and edit accumulated times for each Duty Status recorded; Off Duty, Sleeper Berth, Driving and On Duty IFTA/IRP Tab:
[This feature will be implemented in a free upcoming release]
DVIR Tab:
View and annotate DVIR records created by the Driver. Supporting Documents Tab:
View Supporting Documents records such as fuel and meal receipts. Manually create new Supporting Documents. Add scanned documents to the Supporting Documents records. 14 15 Navigating work area Screens and Tabs Navigating work area Screens and Tabs Speed Graph Tab:
[This feature will be implemented in a free upcoming release]
Events Tab:
View a complete list of all events recorded automatically by RoadLog, including vehicle status changes and Driver actions. Report Screen Create, view, save and print reports for:
DVIR status. HOS download reminders. IRP driven miles [This feature will be implemented in a free upcoming release]. IRP vehicles list. [This feature will be implemented in a free upcoming release]. Vehicle trips. Supporting Documents Screen View Supporting Documents records such as fuel and meal receipts. Add scanned documents to the Supporting Documents records. Drivers / Vehicles Driver Profile Tab:
Create RoadLog identities for Drivers. Choose from existing profiles for Drivers and vehicles
(using the icon in the actions palette). Trailer Assignments Tab:
Assign trailers to the currently selected Driver. Un-assign trailers from the currently selected Driver. Shipping Assignments Tab:
Assign Shipping Documents to the currently selected Driver. Un-assign Shipping Documents from the currently selected Driver. 16 17 Navigating work area Screens and Tabs Navigating work area Screens and Tabs Company Configuration Screen Company Tab:
Enter and maintain Company and IRP data as well as time zone settings and download warnings. Shipping Documents Tab:
Create new Shipping Document numbers for use in making Shipping Assignments to Drivers. Supporting Documents Tab:
Create a list of predefined Supporting Document types, such as Receipt Fuel and Receipt Meal, to allow Drivers easy and consistent creation of Supporting Documents. Annotations Tab:
Create a list of predefined annotations such as Waiting while loading. Fuel Vendor List Tab:
Create a predefined list of fuel vendors and fueling types such as Normal refueling or Bulk refueling. Fuel Types Tab:
Create a predefined list of fuel types such as Gasoline or Diesel for use in creating reports on fueling events. 18 19 Navigating work area Screens and Tabs Creating and working with Driver Keys Asset Part List Tab:
Create a predefined list of Part Names and associated Part Codes to be used in creating DVIRs for tractors and trailers. Create a predefined list of Types of Defects associated with each Part Name and assign each Type of Defect with a priority level and Defect Code, both for use in creating DVIRs. Application Tab:
Set the language to be used. Set the file types that can be used for Supporting Document scans. Set the maximum file size for Supporting Document scans. Set whether or not the Quick Start Screen will appear at start up. Set the region whose regulations will be used to calculate HOS compliance. Check box to show Sold Tractors / Terminated Drivers. Set the distance, volume and speed units that will be used. Set the location where backup files will be stored and the number of days before a backup warning is given to the user. Check box to select whether Automatic Backup will be performed or not. Support Check for updates to the RoadLog software. Check for updates to the RoadLog Fleet Management Software. Start Remote Control (FastViewer), allowing RoadLog support personnel to diagnose problems and answer questions. Collect and open software diagnostic data for evaluation by RoadLog support personnel. Enter license extension activations to enable management of additional vehicles. View RoadLog legal notices. Purge operational data that is older than the required time period. 5. Creating and working with Driver Keys Creating Drivers To use RoadLog, each Driver must have a profile in the Fleet Management Software and must have a personal Driver Key activated with that profile. The RoadLog Driver Key is a proprietary USB drive that allows Drivers to log in to RoadLog and download and transfer their records to the Fleet Management Software or transfer their data between multiple vehicles equipped with RoadLog devices. The Driver Key can also be used to transfer software updates to the RoadLog device. Creating a Driver Profile To create a Driver profile, click on the Drivers/Vehicles button in the main navigation. Click on Create Driver from the Action Palette. Enter the data for the Driver fields outlined in orange are mandatory and must be completed. The Driver Key serial number (S/N) can be found on the Driver Key package, or it can be read from the key_data.txt file on the Driver Key. Enter the serial number exactly as it appears, including all zeros. If you wish to enter the optional Latitude and Longitude information for the Work Reporting Location can be found using free websites such as http://itouchmap.com The Last 15 days RODS file name is set automatically for the file that contains the most recent RODS data for the selected Driver. When data has been entered, click Save. The Drivers profile is now part of the Fleet Management Software data. After the Drivers profile has been created in the Fleet Management Software, the profile must be transferred to a Driver Key to activate the Key. Activating a Driver Key Insert the Driver Key you want to activate into an open USB port. Click the Drivers/Vehicles button in the main naviagtion. From the Action Palette click Export to RoadLog. A popup for selecting the Key appears. Select the drive icon for the Driver Key you wish to activate. 20 21 Creating and working with Driver Keys Transferring data Click the Driver icon in the Action palette, and select the Driver you wish to assign to the Key from the drop down box that appears. Note: Only Drivers for whom a serial number is not already assigned will appear on the drop-down list of Drivers. Once the Drivers profile data and relevant company information has been downloaded to the Driver Key, that Driver can now automatically log in to the RoadLog device by inserting the Key. When the Driver changes vehicles within a working day or within a working week, the data is transferred from one vehicle to another and it is recognized by each RoadLog device installed in those vehicles at log in and log out. When the Drivers workday is complete, updated records can be downloaded to the Driver Key for transfer to the Fleet Management Software. Note: The Fleet Key can also double as a Driver Key for one Driver. To use the Fleet Key as a Driver Key, insert the Fleet Key and follow the steps listed above for activating a Driver Key. Note: If there are two usable Keys available to the computer when you chose Export to RoadLog, you will be asked to choose which Key is the one you wish to activate. For complete instructions on downloading data from the device, see the RoadLog User Manual. Reassigning a Driver Key A Driver Key can be reassigned to a new Driver by deleting the Drivers data from they key, deleting the Keys Serial Number from the profile of the old Driver and assigning the Keys Serial Number to the new Driver. WARNING!!! DO NOT DELETE the BOS_ LICENSE.dat file or the driver folder as this will turn RoadLog Driver Key into a plain USB flash drive, and you will not be able to use it as a RoadLog Driver Key. 6. Transferring data Uploading Driver data to the Fleet Management Software At the end of the workday, Drivers will download their data from RoadLog to their Driver Key. Once Drivers download their data from RoadLog to the Driver Key, the data can be entered into the Fleet Management Software:
Insert the Driver Key into the PCs USB port. Select Drivers / Vehicles from the main navigation. From the Action palette click Import From Roadlog. Select the key from which you wish to import. Click Yes to import all, No to cancel, or Details to choose specific files to import. The RoadLog Fleet Software will detect when a new trailer, not currently in the company data, is included in the data being imported from the Driver Key. If a new trailer is detected, a Create Trailer pop-up window will appear. Data for the trailer must be entered and it will be saved along with the data imported from the Driver Key. When importing the files from the Fleet Key or Driver Key the data are archived in the installation folder
(e.g. C:\Program Files\VDO\BOS\dist\Archive). Exporting to RoadLog In addition to downloading data from RoadLog to the Fleet Management Software, there will also be data that must be uploaded from the Fleet Management Software to RoadLog. Examples include:
When a Driver has been assigned a new trailer or shipping document. When company configuration data has been updated. When a Drivers records have been annotated in the Fleet Manager Software. To export data from the RoadLog Fleet Management Software to RoadLog:
Insert the Driver Key into the PCs USB port. Select Drivers / Vehicles from the main navigation. From the Action Palette click on Export to RoadLog. Company and Driver files are automatically downloaded to the Driver Key. Note: If there is more than one Key inserted, you will be asked to choose the one you want to download to. 22 23 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions 7. Screens & Tabs: Features & Functions Viewer Screen HOS Tab The HOS tab displays Driver information across the top of the work area: name, employee number, date of birth, Driver ID, the currently displayed date as selected in the action palette calendar and the cycle chosen for the HOS schedule. Note: The Driver information seen here is entered and maintained on the Driver Data Tab of the Master Data screens. In the work area, the Drivers hours of service are shown in several formats:
Logbook Timeline The logbook timeline displays a running line of a Drivers Duty Status (On Duty, Driving, Sleeper Berth, Off Duty) and also shows color-coded indicators for Events, Violations, Exemptions and Supporting Documents associated with times recorded in the Drivers log. Annotating the logbook The recorded record shown in the logbook timeline can be changed if necessary. An example would be a period of time when the Driver neglected to switch from On Duty to Off Duty. Click and drag on a segment of the timeline, to select it. Right-click on the selection to change (annotate) the status recorded. A Create Duty Status pop-up appears. Enter the revised time span and status you wish to record and click OK. Note: Segments can only be selected for editing as they were recorded. Therefore some edits will require you to individually select and edit multiple adjacent segments to create one continuous new segment. Segments can also be edited in the events grid below the logbook view. While the logbook record displayed will reflect the changes made, the Fleet Management Software will annotate the data as having been changed and will retain the original data as well as the revised data. To view the original, unchanged data, click the Show Original Data checkbox in the Action Palette. Data can also been added manually when clicking on a calendar day. If no data is available this message appears: No HOS data for the Driver available. To create HOS data please click here. Clicking brings up a pop-up where data can be entered. This can also be used to enter activities recorded for the previous 15 days for a new Driver or when starting up a new company record. Events Grid Below the logbook view, the events grid shows a record of the same data seen in the logbook. Annotating the Events Grid Clicking on some cells in a segment row allow you to edit the value in the cell, either by directly typing in a new value or by selecting a new value from a drop-down menu. While the grid and logbook record displayed will reflect the changes made, the Fleet Management Software will annotate the data as having been changed and will retain the original data as well as the revised data. To view the original, unchanged data, click the Show Original Data checkbox in the Action Palette. The data points in the Events Grid include (from left to right):
Events: Colored dots that coincide with the dots seen on the events timeline indicating Events (Green), Violations (Red), Exemptions (Yellow), and Supporting Documents (Blue). From: Start time for the trip segment. To: End time for the trip segment. Duty Status: Duty Status indicated by the Driver during the segment (Duty Status can be edited by clicking on the cell and selecting another status from the pull-down menu). Entry Type: Indication of whether the recorded segment was entered manually in the Fleet Management Software (RFS manual record) or recorded automatically by RoadLog (RoadLog automatic record). Login Role: Indication of whether the record was made under a Driver or Co-Driver log in (Login Role can be edited by clicking on the cell and selecting another status from the pull-down menu). VLPN: The Vehicle License Plate Number of the vehicle recorded for the segment (the VLPN can be edited by clicking in the cell choosing another VLPN from the pull-down menu). Start Odometer: The odometer reading at the beginning of the segment. End Odometer: The odometer reading at the end of the segment. Note: The odometer reading can be edited by clicking in the cell and entering another value. However, the End Odometer reading entered cannot be lower than the Start Odometer reading from the previous cell. 24 25 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Note about Odometer readings: The RoadLog device is typically calibrated to observe the odometer reading from the engines computer. The engine computers odometer reading can vary significantly from the odometer reading displayed on the dashboard. These conflicting odometer readings both come from different message sources within the vehicle. Therefore, odometer readings from this device may not match the odometer reading displayed on the dashboard. State: The state traveled during the segment (the State can be edited by clicking in the cell and choosing another state from the drop-down menu). Location: The nearest populated area to the area traveled during the segment. Distance to nearest populated location: Distance to the nearest populated area as recorded by the US census. Bearing Data: Your current location relative to the closest most populated place for example, 7 miles West of Allentown, PA. Description: Remarks recorded by the Driver regarding changes of duty status. Additional Events Grid data Clicking on some of the other cells in a segment row in the events grid opens an additional grid view showing additional details for the segment including:
Events Date/Time: Exact recording time for an Event. Odometer: ECM Odometer reading at the time of the event (may not match the instrument cluster odometer). Event Code: Predefined codes for diagnostic events recorded by the RoadLog device, including FMCSA type events and events related specifically to the RoadLog device. FMSCA Diagnostic Code: FMCSA codes for events that are detected and recorded in order to maintain compliance with US HOS regulation. Abbreviation: FMCSA abbreviations for events that are detected and recorded in order to maintain compliance with US HOS regulation. Examples include ENG_ON (Engine On) and BATLOW (Battery Low). Short Description: Predefined descriptions for predefined events. An example would be Successful Driver log in using Driver Key. Description: A longer text version of the activity described in the Short Description. Violations / Exemptions Violations are instances where the Drivers record of duty status has violated FMCSA regulations. Violations are highlighted by red dots on the Logbook Timeline and by red dots in the Events Grid. Clicking on the red dot in the Events Grid reveals a second grid showing details of the Violation including Date / Time, Odometer, Event Code, Type, Short Description and Description. Exemptions are instances where the Driver has encountered circumstances that affected HOS compliance. Exemptions are predefined in the RoadLog device and include Emergency Conditions, Adverse driving conditions, 16 hours extension, 100- or 150-mile radius Driver, and Personal Use. Accumulated Duty Status Durations Grid Below the events grid view, the accumulated Duty Status view shows daily and weekly cumulative totals of each Duty Status, based on the values seen in the logbook and events grid displays. Map View and IFTA / IRP Tabs
[These features will be implemented in a free upcoming release]
DVIR Tab The DVIR Tab displays Driver Vehicle Inspection Reports recorded by the Driver in the RoadLog device and imported into the Fleet Management Software as well as DVIRs created in the Fleet Management Software. To select the vehicle that you wish to view o r create a DVIR for:
Click on Viewer form the main navigation. Click on the icon at the top of the Action Palette. Select the vehicle from those shown. Select the date that you wish to view or create a DVIR for from the interactive calendar in the Action Palette. The drop down menu field below the calendar is self-populated with the times for all the DVIRs created on the selected date. If there is more than one DVIR for a selected date, choose the time from the drop down menu for the DVIR you want to view. At the top of the screen, the work area data displayed reflects the vehicle and the date selected including License Plate Number, VIN, Displayed date, and Make and Model of the vehicle. 26 27 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Creating a DVIR in the Fleet Management Software The Driver in the RoadLog can create DVIRs, or they can be created in the Fleet Management Software. To create a DVIR in the Fleet Management Software:
Click on Viewer in tha main navigation. Select the date you want to record the DVIR for in the calendar, and then click on Create new DVIR in the Action Palette. Complete the fields in the tab. Fields outlined in orange are mandatory. The DVIR fields include:
Driver submitting DVIR: The Driver who has reported the vehicle inspection details. Odometer Reading (miles): Odometer at the time the report is made. State: The state from which the DVIR was filed. Location: The location from which the DVIR was filed. Driver approving repair: Driver who has viewed the repairs made to defects reported in the DVIR and has judged them to be complete. Approval Date: Date that the Driver approving the repair reported that the repairs had been made satisfactorily. Approval notes: Comments made by the Driver or user on the repairs and approval. No defects detected: A check box to indicate that the Driver detected no defects. Repair person: The person making repairs to the reported defects. Repair date: The date the defects were repaired. Repair certification: Predefined list of repairs for annotations to the repair persons report; None, Repairs made, Repairs not necessary. Safety certification: Predefined list of safety conditions for annotations to the repair persons report; None, Safe to operate, Unsafe to operate. Repair notes: Comments made by the repair person or user on the repairs and approval. You can add defective parts to the DVIR by clicking the Add Part button at the lower right of the screen and selecting from the list of predefined parts. Once you have entered the defective part, you may add the defect(s) you want to record for the part by clicking on the Add Defect bar, and selecting the defect(s) from the list of predefined defects. When all fields and defect part listings are completed, click Save to record the DVIR. To print the DVIR, click on the Print button at the lower right of the screen. Note: There is a list of predefined defective parts that comes with the Fleet Management Software. You can add additional parts to the list by clicking on the Add button below the Part Name / Part code grid on the Asset Part List tab. Once uploaded to RoadLog, these parts and defects will appear in the RoadLog menus for easy creation of DVIRs. 28 Exporting DVIRs to RoadLog To export DVIRs to RoadLog, insert a Driver Key in the USB port. Click on Drivers / Vehicles in the main navigation. Click on Export to RoadLog in the Action Palette. Click on the Key you wish to export to. If more than one Key is inserted, select the correct drive. All Driver files are automatically transferred to the Driver Key. Importing DVIRs from RoadLog To import DVIRs from RoadLog, insert a Driver Key in the USB port. Click on Drivers / Vehicles in the main navigation. Click on Import from RoadLog in the Action Palette. Click on the Key you wish to export to. If more than one Key is inserted, select the correct drive. All Driver files are automatically transferred from the Driver Key to the Fleet Management Software. Supporting Documents Tab Supporting Documents are electronic records of costs incurred by the Driver during the trip. Examples include Fuel Receipt and Meal Receipt. The Supporting Document records are created by the Driver on the RoadLog device and transferred to the Fleet Management Software when data is exported from RoadLog and imported into the RoadLog Fleet Management Software. To allow Drivers easy and consistent creation of Supporting Documents, predefined Supporting Document Categories can be created in the Fleet Management Software, in the Company Configuration screens Supporting Documents tab (not to be confused with the Supporting Documents tab in the Viewer screen). Supporting Document Categories that are created here will appear as choices for the Driver in the RoadLog device, once data has been exported from the Fleet Management Software to the RoadLog device. A paper receipt for each Supporting Document can be printed from the RoadLog device, using the RoadLogs built-in thermal printer. In addition, physical documents such as paper receipts can be scanned, and the scanned file can be attached to the Supporting Documents electronic record. The Supporting Documents tab displays vehicle information across the top of screen in the work area: Vehicle License Plate Number, VIN, Make and Model, and the currently displayed date period as selected in the action palette. The work area shows a table of Supporting Documents associated with the currently selected vehicle, listed in order by entry date and time. 29 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Each Supporting Document record shows:
Entry date/time: Entered automatically when the record is created. Supporting Document Number: The number assigned automatically by the software when the supporting Document is created. Description: The description is selected from the list of predefined Supporting Document types established in the Company Configuration /
Supporting Documents tab. Link: A scan of a physical document that is added to the Supporting Document record. Browse: Click the Browse button to navigate to and select the scan file you wish to make a Link. Note: File types accepted and the maximum file size that can be used as a link is set in the Company Configuration / Application tab. Driver: The Driver who created or is associated with the Supporting Document. Processed: A check box that indicates that the user has finished working with this record. Once clicked, the record is processed and the Supporting Document will no longer be displayed in the list. To create a new Supporting Document in the Viewer / Supporting Documents tab:
Click on the Viewer in the main navigation. Click on the Supporting Documents tab. Click the Add Entry button. The Add Supporting Document Number dialog is displayed. Select a description from the drop-down menu. Select a Driver from the drop-down menu. If appropriate, select a scanned document to add to the record by clicking the button. Navigate to the file and click on Open to select the file and add it to the record. Speed Graph Tab This functionality will be introduced in 2013. Events Tab The events tab displays vehicle information across the top of the work area and a table of events automatically logged by the RoadLog device, listed in order by date and time. Select the date to be displayed from the interactive calendar in the Action Palette. For each event, the table shows the odometer reading, the event code, Federal Motor Carrier Safety Administration (FMCSA) diagnostic code (if applicable), a short description and a longer description. Clicking and dragging on the column divider allows you to view the full contents of any cell. 30 Report Screen The report screen displays information about the Fleet Key currently in use across the top of the work area, including its DOT number, serial number, IFTA number and memory capacity. In the work area, a drop-down menu allows you to select the type of report you wish to view:
DVIR Status. HOS Download Reminder. IRP Miles Driven. (Future feature.) IRP Vehicle List. (Future feature.) Vehicle Trip. (Future feature.) Reports can be printed directly from the Fleet Management Software or saved in a variety of formats, including PDF, RTF, ODT, DOCX, HTML, XLS and CSV. DVIR Status Report The DVIR Status Report data includes:
Vehicle number Most Recent Pre-Trip Date Most Recent Post-Trip Date Most Recent Pre-Trip Driver Most Recent Post-Trip Driver Repair Certification Safety Certification To view the DVIR Status Report click on the Report button. Select DVIR Status Report from the drop-down menu. Click on the Create Report button. The Fleet Management Software generates the report and shows an on-screen view. From the on-screen view you can print or save the report. 31 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions HOS Download Reminder Report The HOS Download Reminder Report shows a list of Drivers and their IDs along with:
Last Downloaded Date Next Download Due Date Days until Next Download To view the HOS Download Reminder Report, click on the Report button. Select HOS Download Reminder Report from the drop-down menu. Click on the Create Report button. The Fleet Management Software generates the report and shows an on-screen view. From the on-screen view you can print or save the report. IRP Driven Miles and IRP Vehicle List Reports
[These features will be implemented in a free upcoming release]
Vehicle Trip Report The Vehicle Trip Report shows the selected vehicles trip data, including state traveled, route used, odometer reading at border crossing(s), distance driven in each state, date of the trip/segment, fuel type used, gallons refueled and fuel price per gallon. To view the Vehicle Trip Report, click on the Report button. Select Vehicle Trip Report from the drop-down menu. Select the vehicle you wish to view from the drop-down menu. Select a start date and end date from the interactive calendar. Click in the date field to display the interactive calendar. Use the double arrows to select the year. Use the single arrows to select the month. On the interactive calendar, select your desired date. Note: The Today button provides a shortcut to enter todays date. Click on the Create Report button. The Fleet Management Software generates the report and shows an on-screen view. From the on-screen view you can print or save the report. Supporting Documents Screen The work area shows a table of Supporting Documents by entry date and time. The range of entry dates shown is selected with the interactive calendar in the action palette. This Supporting Document Screen also displays the companys Fleet Key information across the top of the work area. The table shows the Entry date / time, Vehicle License Plate Number, Driver, Supporting Document number, Supporting Document (linked scan file), a Browse button to locate and open scanned document files, a document Description and a checkbox indicating whether the document has been processed. To add a scanned file to a Supporting Document record, click the Browse button to find and select the file. Note: File types accepted and the maximum file size that can be used as a link is set in the Company Configuration / Application tab. Drivers / Vehicles Screen The Drivers / Vehicles screen shows the Driver Profile tab as well as tabs for Trailer Assignments and Shipping Document Assignments. When the Drivers / Vehicles screen is chosen, the the Action Palette allows you to view and make selections from the lists of existing Drivers, vehicles and trailers. icon in When Drivers / Vehicles is seleted from the main naviagtion, the Action Palette will also allow you to:
Create new Driver. Create new vehicle. Create new trailer. Import data from a RoadLog device via a Fleet or Driver Key. Export data to a RoadLog device via a Fleet or Driver Key. 32 33 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Driver Tab The Driver tab shows three types of data: Common Data about the Driver, Hours of Service (HOS) settings and data on the Drivers work reporting location. Many of the fields provide drop-down menus for quick selections from a list. HOS Settings:
US HOS schedule (7 days or 8 days). US HOS starting time (in 24-hour format). To create a new Driver Profile see Creating and Working With Driver Keys. Driver data includes:
Common Data:
First / Last name. Date of birth. Employee Number (assigned by the Fleet Manager). Drivers License Number. Driver ID (this is a unique identifier assigned when the Driver entry is created and cannot be edited once set). Home terminal time zone. Date hired. Termination date. Type (type of vehicle driven by this Driver, Property Carrying (Truck) or Passenger Carrying (Bus)). Driver Key Serial Number. Language. Personal use distance limit. Canadian HOS schedule (Cycle 1 or Cycle 2). Canadian HOS starting time (in 24-hour format). 34 hours restart function (Allowed or Not Allowed). Warning time before violation occurs (No warning or 30, 60 or 90 minutes in advance). HOS type. 100/150 air-miles radius (Not assigned, 100 miles or 150 miles). Last 15 days RODS file name. File name for RODS
(Record of Duty Status) file covering the last 15 days (file and file name is created automatically by the Fleet Management Software). Work Reporting Location:
State (or Canadian province). Location. Latitude. Longitude. Note: If you wish to enter the optional Latitude and Longitude information for the Work Reporting Location it can be found using free websites such as http://itouchmap.com Vehicle Screen The Vehicle Screen can be seen by clicking on the Palette and selecting the Vehicle that you want to view. If no vehicles exist, you must first create one to see the Vehicle screen. icon in the Action The vehicle screen shows the Vehicle Profile including: Common Data about the vehicle, Calibration Data to ensure accurate speed and mileage records, IRP/IFTA data and GSM/GPRS network registration data. Many of the fields provide drop-down menus for quick selection from a list. Note: IRP/IFTA and GSM/GPRS functionality will be implemented in an upcoming release. Creating a Vehicle Vehicles must have a profile created before they can be assigned to a Driver. To create a new Vehicle profile from the Drivers / Vehicles screen:
Click on Drivers / Vehicles in the main navigation. Click on Create Vehicle in the Action Palette. Enter the Vehicles data. Fields with orange borders are mandatory and must be completed. Click Save. The Vehicle record is created. 34 35 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Vehicle data includes:
Common Data License Plate Number. VIN. Make. Model. Type. Seats. Axle. Weight. Fuel Type. Tire Size. Vehicle Number (this is a unique identifier assigned when the vehicle entry is created, and cannot be edited). Manufacturing Date. Can Pull Trailer (checkbox to indicate whether or not the vehicle can pull a trailer). Is Active (checkbox to indicate whether or not the vehicle is active in the fleet). Configuration and Calibration Data Low pressure: The lower tire-pressure threshold that generates a warning to the Driver and records a RoadLog device event in vehicles with a Tire Pressure Management System (TPMS). High pressure: The upper tire-pressure threshold that generates a warning to the Driver. (This feature is not yet implemented) Printing speed (for instructions on selecting the printing speed see Setting the Printing Speed). Additional fields are included that will not be used until GSM/GPRS functionality is made available in a future release:
Automatic update server query. Update server query period. Update server IP address. Update server URL. IRP/IFTA data IRP/IFTA data fields are included but will not be used until IRP/IFTA functionality is made available in a future release:
Purchase date. IRP Registration Date. RoadLog serial number (The RoadLog device serial Date of Sale. number can be found on the sticker on the RoadLogs underside. It is the number on the right side of the sticker). W (a calibration factor). See Setting Configuration Parameters). Synchronization type: The type of cable connection used to connect RoadLog to the vehicle (see Setting the Vehicle Synchronization Parameter). Total vehicle odometer: The odometer reading at the time you create the vehicle profile. Wake up condition: The event that triggers the device to begin recording data (see Setting the Wake up condition). Important note: Improper calibration of the WakeUp Condition may result in the RoadLog device screen failing to turn off after the engine has been shut off. This can lead to failure of the vehicles battery. Apportional Vehicle (checkbox). List Price. Purchase price. Sale price Owner. GSM/GPRS network registration data GSM/GPRS data fields are included but will be optional in future GSM RoadLog enabled devices:
ICCID (Integrated Circuit Card ID). PIN (Personal Identification Number). PUK (Pin Unlocked Key). APN (Access Point Name). Username. Password. GPRS (General Packet Radio Service) usage in roaming. Calibration Data W and N factors are utilized in RoadLog calibration on trucks that feature a non-computerized interface with RoadLog. These trucks are uncommon, and are usually older models. Installation on these trucks is done with the RoadLog Open-end cable. The vehicles W factor is the number of pulses that are generated by the vehicle speed sensor when the vehicle travels a distance of 1 kilometer. By default, the W factor parameter is set to 8,000 pulses / km. If the vehicles W factor is not known, it can be set by direct measurement through the RoadLog device while driving. See Setting the W Factor. If the W factor setting is changed in the vehicle, the value in the Fleet Management Software will be overwritten. This will happen when the data from the vehicle is downloaded to the Fleet Management Software from the Driver Key. Creating Trailers To create a new Trailer profile from the Drivers / Vehicles screen:
Click on Drivers / Vehicles in the main navigation. Click on Create Trailer in the Action Palette. Enter the Trailers data. Fields with orange borders are mandatory and must be completed. Click Save. The Trailer record is created. 36 37 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Shipping Assignments Tab icon in the Action When a Driver is selected using the Palette, the Shipping Assignments tab shows two columns used to assign Shipping Documents to a Driver and to remove Shipping Documents assignments from a Driver. The Shipping Documents shown in the columns are created in the Shipping Documents tab in the Company Configuration screen. To assign a Shipping Document to a Driver from the Shipping Assignments tab:
Click Drivers / Vehicles in the main navigation. Click on the Shipping Assignments tab. From the Action Palette, click on the Driver icon and select the Driver that you want to assign Shipping Documents to. Click on a Shipment number in the left column to highlight it. Click on the right-facing arrow buttons to move a Shipment number from the Not assigned column to the Assigned column. You can move all Shipments at once by clicking on the double arrow buttons. When you have completed your Shipment assignments, click Save. To remove a Shipping Document assignment from a Driver, use the left-facing arrows to move document numbers from the Assigned column to the Not assigned column. When completed, click Save. Trailer Screen To view the Trailer screen:
Click Drivers / Vehicles in the main navigation. Click the Icon in the Action Palette and select the trailer that you want to view. If no trailers exist, you must first create one to see the Trailer screen. When a Trailer is selected in the Action Palette, the Trailer Profile screen in shown. Data includes:
Trailer number (this is a unique identifier assigned when the trailer entry is first created and cannot be edited). Make. Type. Axle. Weight. Trailer Assignments Tab To view the Trailer Assignments tab:
Click Drivers / Vehicles in the main navigation. Click the Icon in the Action Palette and select the Driver that you want to assign trailers to or from. The Trailer tab shows two columns used to assign trailers to a Driver and to remove trailer assignments from a Driver. Note: Trailer numbers shown in the columns are assigned in the Create Trailer tab. To assign a trailer to a Driver from the Trailer Assignments tab:
From the Action Palette, click on the Driver icon and select the Driver that you want to assign the trailer to. Click on a trailer number in the left column to highlight it. Clicking on the right-pointing and left-pointing arrow buttons will move Trailer numbers from the Not assigned column to the Assigned column for the selected Driver. Note: The double arrow buttons will move all entries in the column. To remove a trailer assignment from a Driver, use the left-facing arrows to move trailer assignments from the Assigned column to the Not assigned column. When completed, click Save. 38 39 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions IRP Address Name (company name). Address (address used for IRP reporting for the fleet). City, ZIP. State. IRP Account Number. IFTA Number. Phone. Fax. Email. The download warnings are as follows:
Drivers download warning for data due every 30 days:
30-day data must be downloaded before the end of the 30th day, or the oldest data will be lost. The Drivers download warning for data due every 30 days sets the number of days before the end of the 30th day that the Driver receives a reminder to download data before it is lost. The RODS download warning time:
RODS data must be periodically downloaded or the oldest data will be lost. The RODS download warning time sets how far in advance the Driver receives a warning before it is lost. Time Zone and Download Warnings The Companys home terminal time zone is the time zone from which the Fleet being managed is deployed. Some types of data must be downloaded from RoadLog more frequently than other types. The Fleet Management Software provides warnings to remind you to perform downloads regularly. Download Warnings are displayed to the Driver three days before the oldest data is overwritten by default. The default download warnings can be modified to your preference. Company Configuration Screen The Company Configuration screen contains tabs for the companys profile as well as information that supports other aspects of the RoadLog Fleet Management Software. Some of this information is used to automatically complete on-screen fields and reports. It also provides the settings that control how the software operates. Company Tab When you used the Fleet Management Software for the first time, you entered your company information to activate the software. Some of the information seen in the Company tab will have been entered automatically during your activation. Complete any empty fields, and correct any fields with incorrect or incomplete information. Note: The fields with orange borders are mandatory and must be completed. Company data fields include:
Common Data Name (company name). Password. Confirm Password (must match Password). Address (address of the companys headquarters or the field office that the fleet is deployed from). City, ZIP. State. US DOT Number. Latitude. Longitude. (The button for Fetch Latitude Longitude provides the entry for the coordinates automatically. An Internet connection is required.) IFTA Number (International Fuel Tax Agreement). Phone. Fax. Email. Contact Person. Serial Number (for the Fleet Key). Days between Download Data Reminders (lets you select the number of days that will pass before you receive a reminder to back up your data). IRP Address Identical (If checked, the software automatically fills out the appropriate IRP data fields with entries identical to those in the Common Data). 40 41 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Shipping Documents Tab Shipping Documents are records relating to Bills of Lading or Pro Numbers. Note: Shipping Documents are assigned to Drivers in the Shipping Documents tab in the Drivers / Vehicles screen. Creating Shipping Documents To create a new Shipping Document:
Click on Company Configuration in the main navigation. Click on the Shipping Documents tab. An Add Shipping Document pop-up window appears. Add the Shipping Document number and click OK. The number is added to the list. Supporting Documents Tab Supporting Documents are records of transactions that Drivers collect on a trip such as fuel bills, food bills, Bills of Lading, or, and Shipping Documents. Supporting Documents can be created by the Driver in the RoadLog device or in the Fleet Management Software. In addition, physical documents can be scanned and added to a Supporting Document record in the Fleet Management Software. Having predefined Document types makes creating Supporting Documents in the RoadLog device faster and more consistent. The Supporting Documents tab in the Company Configuration screen is where you can add to the list of predefined Supporting Document types. To add a Supporting Document Category:
Click on Supporting Documents in the main navigation. Click on the Supporting Documents tab. Add Supporting Documents categories you wish to track. After each entry, click OK. To learn how to create a Supporting Document in the RoadLog device, see RoadLog Supporting Documents. To learn how to create a Supporting Document in the RoadLog Fleet Management Software, see the Supporting Documents Tab. 42 Annotations Tab Annotations are comments or corrections made to Duty Status records submitted by Drivers on their Driver Keys. In the Annotations tab, you can create predefined Annotations to explain changes made in Duty Status records, such as waiting while loading or traffic stopped. Having predefined Annotations makes creating reports from the RoadLog device faster and more consistent. To create a predefined Annotation from the Annotations tab:
Click on Company Configuration in the main navigation. Click the Annotations tab. An Add Annotation pop-up appears. Add text explaining each Annotation youll want to use. After each entry, click OK. Note: Annotations are shown on the daily logs as required by FMCSA regulations. Fuel Vendor List Tab The Fuel Vendor List tab allows you to create a predefined list of fuel suppliers and the Fuel Types purchased from them. The Fuel Vendor names are recalled when creating Supporting Documents. To add a Fuel Vendor from the Fuel Vendor List tab:
Click on Company Configuration in the main navigation. Click the Fuel Vendor List tab. Click Add. An Add Fuel Vendor pop-up is displayed. Enter the Fuel Vendor Name and select the Fueling Type from the pull-down menu. Click OK. The vendor and type are added to the list. Fuel Types Tab The Fuel Types tab allows you to create predefined Fuel Types. The Fuel Types are used in your Fuel Vendor list records. To add a Fuel Type from the Fuel Types tab:
Click on Company Configuration in the main navigation. Click the Fuel Type tab. Click Add. An Add Fuel Type pop-up is displayed. Enter the Fuel Type. Click OK. The Fuel Type is added to the list. 43 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Asset Part List Tab The Asset Part List allows you to create predefined lists of Part Names and Part Codes for the Part Names. It also allows you to create predefined lists of Defects for each of the Part Names. Each Defect Name is assigned to a specific Part Name. Defect Codes are assigned to each Defect name and Defects can be flagged as being High Priority. The Part Names and Codes and Defect Names and Codes are used by the Driver when creating DVIRs in the RoadLog device. All Part Names are established as either a Trailer part or a Tractor part. To add Part Name and Part Code to the Asset Part List:
Click on Company Configuration in the main navigation. Click the Asset Part List tab. Select Tractor or Trailer from the Asset Type list. Click the Add button below the Part Name / Part Code grid to add a Part Name for the vehicle type selected. An Add Part pop-up appears. Enter the Asset Part Name and Part Code and click OK. The Asset Part Name and Code are entered. For each Asset Part, you can establish a list of predefined Defects and Defect Codes associated with that part. To create a Defect Name and Defect Code for a specific asset:
Click on Company Configuration in the main navigation. Click on the asset in the Part Name list. Click the Add button below the Defective Name grid. Enter the Defect Name and a Defect Code. Check High Priority, if appropriate and click OK. The Defect Name and Code are entered. After each Defect is entered, click OK. Application Tab The Application Tab allows you to set the parameters for the Fleet Management Software itself. The application settings are established during first start up, but they can be edited at any time. SD Max Size: Set the maximum file size for scans associated with Supporting Documents. Note: Limiting the scan file size will help maintain lower times required for transfers and back ups. To edit the application parameters:
Regulations and Measurements Click on Company Configuration in the main navigation. Regulation: Select the region whose regulations will be Click the Application tab. Click in the appropriate field to edit settings for Common Data, Regulations and Measurement and Path. Application Tab fields include:
Common Data used to calculate HOS compliance. Distance: Choose miles or kilometers as unit for distance. Volume Unit: Choose gallons or liters as the unit for volume. Speed Unit: Choose either miles/hr or km/hr as the unit for speed. Language: Choose the language to be used from the Path pull-down menu. SD Type: A list of the file types that can be used for Supporting Document scanned file links. Only image files (jpeg, png, gif), .pdf and .txt files can be linked as Supporting Documents. The .doc, .exe and .cmd files cannot be used. Database Backup Path: Sets the location where backup files will be stored. Database Backup Period: The number of days before a backup reminder is given to the user. 44 45 Screens & Tabs: Features & Functions Screens & Tabs: Features & Functions Support Screen The Support page allows you to download updates for the Fleet Management Software and the RoadLog device and to work with VDO RoadLog technical and customer support. Your PC must be connected to the Internet to use most of these functions. Update RoadLog Device Software To check for updates available for the RoadLog device from the Support screen:
Click Support in the main navigation. Click Update EOBR Software. The RoadLog Fleet Management Software will automatically check the RoadLog User Portal for software updates. Note, the check may take a few minutes, and you will not see a new window or progress bar as the check is made. If a newer version of RoadLog software is available, you will be asked whether you wish to download the new version. Click Yes to begin the download. The file will automatically be downloaded to your computer and onto the Fleet Key or Driver Key connected to the PC. The next time that Key is inserted into the RoaLog, you will be able to upload the newer software. Update RoadLog Fleet Management Software To check for updates available for the RoadLog Fleet Management Software from the Support screen:
Click Support in the main navigation. From the Support screen click Update Fleet Management Software. The software will automatically check the RoadLog User Portal for software updates. The check may take a few minutes, and you will not see a new window or progress bar as the check is made. If there is a Fleet Management Software version available that is newer than what you are using, you will be asked whether you wish to download the new version. Click Yes to begin the download. When the download is complete, the update will load automatically and restart the Fleet Management Software automatically. No action is required. Start Remote Control (FastViewer) FastViewer is an internet-enabled program that allows RoadLog technical support personnel to share your screen and controls in order to diagnose problems and answer questions. To use this feature, contact RoadLog Technical Support to schedule a FastViewer Session. Technical Support is available from 8:00 am to 5:00 pm EST. Technical Support Email: roadlog-support@vdo.com Tel.: (855) ROADLOG, or (855) 762-3564 Fax: (800) 752-7224 or (610) 366-9837 To start a FastViewer session:
Click Support in the main navigation. Click Start FastViewer. A Connection pop-up appears. Choose the method youll use to connect to the Internet and click Connect. Enter the session number received from Technical Support and confirm the transfer of screen control by clicking On on the remote control. Note: By participating in a FastViewer session, you are agreeing to let VDO Technical Support personnel take temporary control of your PC. Technical support personnel will assist you in the FastViewer procedure. They may ask you to use the Collect Software Diagnostics function to collect diagnostic files for the Net Viewer Session. Collect Software Diagnostics Adding Vehicle Licenses through the VDO Portal The Collect Software Diagnostics function creates an archive of data and diagnostic files that will help technical support personnel deal with your issues. To perform a Collect Software Diagnostics:
Click Support in the main navigation. Click Collect Software Diagnostics. Adding Vehicle Licenses The RoadLog Fleet Management Software includes built-in licenses to track two RoadLog devicess. In order to track additional vehicles, you must purchase additional licenses. VDO RoadLog Fleet Management Software License Extension Cards will enable you to add additional Vehicles to your list of tracked Vehicles. License cards can be purchased from RoadLog retailers. If a RoadLog retailer is not available in your area, licenses can be ordered by phone through VDO RoadLog Customer Support by calling (855) ROADLOG, or (855) 762-3564. Adding Vehicle Licenses through the RoadLog Fleet Management Software Note: The procedure described here requires Internet access to complete the license addition process. If you do not have Internet access, see the instructions for Adding Vehicle Licenses through the VDO Portal. To add Vehicle licenses from the VDO RoadLog Fleet Management Software License Extension youve purchased:
Click Support in the main navigation. Click Add vehicle licenses. Enter the License Key number from the License card youve purchased. Click OK. The Fleet Management Software communicates with the RoadLog portal to activate the licenses. Note: This communication may take several minutes. When communication is completed, the Fleet Management Software will display a confirmation message confirming the number of licenses that have been added. The number of licenses is shown in the Windows bar on the RoadLog Fleet Software application. If you do not have Internet access on the PC that you use to run the Fleet Management Software, you will have to use a different PC that has Internet access to add licenses. Purchase the RoadLog Fleet Management Software License Extension card(s) you need. Take the extension card(s) and your RoadLog Fleet Portal User Name and Password to the Internet-connected PC (your User Name is the email address that you entered when you created your RoadLog Fleet Management Software account). Go to http://www.vdoroadlog.com/software-downloads. Log in with your User Name (email) and Password. Click on Update Fleet Manager licenses. Enter the license code from one License card into the field Add Device Licenses. Click Add License. Click on View Licenses. The portal will display your License Card Number(s) and Activation Code(s). Write down the Activation Code for each newly entered License Card number(s). Note: Copy carefully! All numbers must be exactly correct for the Activation Code to work. Take your Activation Code(s) back to your PC and launch the Fleet Management Software. Click Support in the main navigtion. Click Add vehicle licenses. In the field seen on the Add vehicle licenses screen, enter NOT AVAILABLE. Click OK. Youll see the Extend License Error screen with the message Error occurred while getting Activation key from web service. Click OK. Youll see the Activation Key screen. Enter the Activation Code you copied from the RoadLog Portal. Click OK. The RoadLog Fleet Management Software will update your license record to reflect the additional licenses you purchased. The number of licenses is shown in the Windows bar on the RoadLog Fleet Software application. If you need assistance, call VDO RoadLog support personnel are available at:
Technical Support & Customer Service Email: RoadLog-support@vdo.com Tel.: (855)-ROADLOG, or (855) 762-3564 Fax: (800) 752-7224 or (610) 366-9837 Customer service is available 8:00 am 5:00 pm EST Email: RoadLog-sales@vdo.com www.vdoRoadLog.com 46 47 Screens & Tabs: Features & Functions Resolving Conflict Files Replacing Lost or Damaged RoadLog Keys If your Fleet Key or Driver Keys are ever lost or damaged, VDO Technical Support can replace them. They will assist you in restoring the data on the keys and enabling the new keys to work with your existing Fleet Management Software. Note: Buying a new key to replace a lost or damaged one is only one part of what youll need to do to restore your operations. Your Fleet Management Software records are tied to the specific serial numbers of your Fleet Key and Driver Keys. To enable your Fleet Management Software to work with new serial numbers, youll need assistance from VDO Technical Support. If you need to replace lost or damaged keys, contact VDO Technical Support:
VDO RoadLog support personnel are available at:
Technical Support & Customer Service Email: RoadLog-support@vdo.com Tel.: (855)-ROADLOG, or (855) 762-3564 Fax: (800) 752-7224 or (610) 366-9837 Customer service is available 8:00 am 5:00 pm EST Email: RoadLog-sales@vdo.com www.vdoRoadLog.com Purging old data Whenever you import files, the Fleet Management Software will automatically purge data from the Driver Key and Fleet Key that is older than you are legally required to keep. Backup files are not affected; the Fleet Management Software keeps a copy of those files in the backup folder. Note: The backup folder location is defined in the Company Configuration / Application tab in the Backup Path field. To choose the backup location:
Click Company Configuraton in the main navigation. Click the Application tab. Click on the button and navigate to the directory/
folder you want to use. When youve selected the directory/folder, click Open. You may want to periodically purge old data from the Driver or Fleet Key, manually. As it is used, the Driver Key will continue to accumulate data. The Key will eventually fill up and need to be purged of old data. To manually purge older data from the the Driver or Fleet Key:
Click Support in the main navigation. Click Purge RoadLog Key file. The default choice is to purge all records shown with a checkmark. If you want to purge only selected files, unclick the Purge All checkbox and select those you want to purge in the check box column. If you want to purge all, leave the box checked. Click OK. The selected records are purged from the RoadLog Key. 8. Resolving Conflict Files Using the Fleet Key and Driver Keys, data can be imported from the RoadLog Fleet Management Software to the RoadLog device, and from the RoadLog device to the Fleet Management Software. As a result of such data transfers, there may be instances of conflicting files, where data from the Fleet Management Software does not match the data from the RoadLog device. When the Fleet Management Software detects conflicting data, it will prompt you to resolve Conflict Files. You will need to choose which file to retain the file generated at the RoadLog device or the File generated in the Fleet Management Software. Often, the newer file will be the correct one to retain, but there may be instances where the opposite is true. Check with the Driver who created the records in the RoadLog device to help determine where the conflict occurred and which record is the correct record to retain. IMPORTANT: When you choose the conflicting file to retain, it will overwrite the other record! Be sure to choose carefully before proceeding. 48 49 Backing up your RoadLog Data 9. Backing up your RoadLog Data Moving from paper logbooks to electronic fleet data does not change the regulatory requirements for maintaining compliance records. The US and Canada require that operators maintain HOS and other records for specific periods of time in the US, for six months. You are legally responsible for maintaining that data. That means establishing a data backup routine and following it without exception. A daily backup is the best way to avoid falling out of legal compliance. Do not back up data to the same computer that holds your active Fleet Management Software. If it fails, youll lose your data and your backup. In the Application settings tab, you can set in the back-up location, whether you want the back-up to take place automatically and how frequently. Any one Key, hard drive, or computer can fail, or be lost or stolen. So always back up to multiple storage devices. To guard against fire or other natural disasters, never keep all your backups in one location. We strongly recommend daily transport or copying of backups to an off-site location. Driver back up reminders at startup RoadLog Fleet Management Software supports easy backup with automatic reminders at intervals you select. You can backup RoadLog data to any storage location your PC can access a USB memory stick, a CD or DVD, an external hard drive, a networked server or online cloud storage. When youve used the Fleet Management Software for a period of time, youll see Driver backup reminders at startup. Youll see a grid that lists Drivers along with the date of their last download, the date their next download is scheduled for and the number of days until the next download will be overdue. 50 Chapter 2: VDO RoadLog Installation This chapter of the Owners Manual is intended to help you get your RoadLog device installed, up and running quickly and easily. BEFORE STARTING:
To avoid damage to the vehicle or risk of electric shock, always confirm the location of electric wires and air lines by consulting the vehicles owners manual or your local vehicle repair facility. If there is any uncertainty about the location of electric wires, disconnect the vehicle battery before drilling. Be careful when installing cable or wires to avoid kinks, knots or twisting in the line. Be certain cable/wires are not rubbing on sharp edges. RECOMMENDED TOOLS:
Drill Pen or pencil 5mm Tape Phillips & Flathead Hex Key measure Screwdrivers 6 pin Y 6 pin direct 9 pin direct 9 pin Y with flange 9 pin Y with flange w/plastic nut 16 pin direct OBDII 16 pin Y OBDII Open end 1. Make sure you have the correct Installation Kit!
RoadLog can be connected with 6-pin, 9-pin, 16-pin OBDII or open-end basic cable. Only one cable is required. Choose the one that fits your connector or choose the open-end if you have no connector and will connect individual wires to the vehicle. (For basic cable, installation by a professional shop is recommended. When using the basic cable the ignition line should be connected.) Each cable is supplied with the basic installation bracket. Y-Cables are an optional upgrade that retain an open cable connector in the cab. 2. Choose your Mounting Option. The basic bracket is included with each installation kit. The optional omni-directional mount
(Part #3290-90110100) allows for more mounting location options and greater control of the viewing angle. SUGGESTIONS FOR BRACKET MOUNTING T E K C A R B C S A B I
) d e d u c n l i
(
INSTALL BRACKET WITH DOUBLE-SIDED ADHESIVE... ..OR INSTALL BRACKET WITH SCREWS AND WELL-NUTS. SCREEN VIEW ANGLE IS ADJUSTABLE USING BRACKET KNOBS. INSTALL OMNI-DIRECTIONAL MOUNT WITH DOUBLE-SIDED ADHESIVE OR WITH SCREWS AND WELL-NUTS.
) l a n o i t p o
(
LOOSEN HANDLE ON MOUNT TO REMOVE UPPER PORTION. ATTACH UPPER MOUNT TO UNDERSIDE OF ROADLOG USING SCREWS PROVIDED. PLACE THE ROADLOG AND UPPER MOUNT BACK INTO THE CLAMP AND RETIGHTEN WHILE ADJUSTING THE SCREEN VIEW ANGLE AS REQUIRED. T N U O M L A N O T C E R D
-
I N M O I I 51 52 3. Choose your Mounting Location.
*Recommended locations A. Top of the dash drivers left side*
B. Top of the dash drivers center*
C. Instrument panel drivers right side D. Overhead console drivers left side E. Overhead console drivers center side F. Overhead console drivers right side D E F A B C IMPORTANT: Choose a location that will allow easy operation, but will not block your view of the road. NOTE: The unit must be placed a minimum of 10 inches (20cm) away from the driver. 4. Attach your Bracket or Mount. The bracket or omni-directional mount can be attached with the adhesive foam pads or with screws and well-
nut inserts supplied. When using the adhesive foam pads be sure to clean the surface with a single direction swipes by using an alcohol prep pad supplied in the installation kit. Let it dry and apply the tape. The tape will cure in 24-48 hours. The best results are achieved when the surface is warm, so you may want to warm up the cab if the ambient temperature is low. Screws and well-nut inserts will require drilling into the cabs interior. If using screws, first mark the mounting holes using the bracket or omni-mount base plate as a guide. Make sure to avoid drilling into any electrical cables and air supply lines underneath the surface. If using well-nuts, use a 3/8 drill bit to create a hole in which to insert the well-nut shaft. Again, make sure to avoid drilling into the electrical cables and air supply lines underneath the surface. 5. Prepare the RoadLog. Unpack the device. Remove the service panel on the underside. Insert the Battery. Connect the cable. Close the service panel. Pry open the service panel with a small, flathead screwdriver. Plug the battery connector into the jack and place the battery into the holder. Check marking and plug the data cable. Attach the corrugated pipe. Close the service panel again and insert the three screws included in the box. 6. Connect Cable. Run the cable from the RoadLog to the vehicle data port. The cable can be run behind the interior dash panels via gaps between them or by their removal where necessary. Secure the cable out of the drivers range of motion and moving parts coil up and secure the excess cable by using zip ties provided. 1 Connect the cable to the vehicle data port. The device will power up and be ready for the initial on screen setup. NOTE: If using the Open End Cable, follow the wiring indications shown on Page 6. 2 Cable ports are usually located in the dash (1) or on the floor to the left of the drivers seat (2). 7. Install RoadLog into Mount. Basic bracket:
Place the RoadLog device into the basic bracket and install the knobs. Adjust the screen view angle and then tighten the knobs. Omni-directional mount (optional):
Loosen the handle until the upper portion of the mount can be removed. Attach the upper mount to the underside of the RoadLog device using screws provided. Place the RoadLog device and upper mount back into the clamp and retighten while adjusting the screen view angle as required. 8. Load Paper Roll. To load the paper roll (Part # 3290-90010100), lift the access panel at the top of the RoadLog, lay the paper roll into the cavity and pull the leading edge of the paper forward, towards the screen. The roll should be inserted so that when the paper comes out, it curls towards the back of the unit. 9. Compliance Sticker. Applying the included sticker to the window of your cab is optional, but doing so will ensure that anyone who sees it knows your vehicle is complying with FMCSA regulations.
(Clean surface before applying.) Correct roll orientation Incorrect roll orientation Electronic Driver Lo gs 53 54 6-pin and 9-pin Wiring Configurations The 6-pin and 9-pin cables are configured as shown:
6-Pin Connector (front view) 9-Pin Connector (front view) 6-Pin Description J1708 ( + ) Data J1708 ( ) Data Battery ( + ) Battery ( ) Pin Location A B C E 9-Pin Description Battery ( + ) Battery ( ) J1939/CAN Data HIGH J1939/CAN Data LOW CAN Shield J1708 ( + ) Data J1708 ( ) Data OEM OEM Pin Location A B C D E F G H J OBDII Vehicle Connector If using the OBDII Vehicle Connector, follow the pin assignments from the OBDII connector pin assignments table:
1 9 2 3 4 5 6 7 8 10 11 12 13 14 15 16 OBDII connector pin assignments
(front view) OBDII-Pin Description Chassis ground CAN_H line of ISO 15765-4 CAN_L line of ISO 15765-4 Permanent positive voltage Pin Location 4 6 14 16 Instructions for Open End Basic Cable 2 1 4 3 6 8 10 12 11 7 9 5
(front view) If using the Open End Basic Cable, follow the pin / wire color assignments from the table:
Note: If the vehicle ignition line is accessible during RoadLog installation, its recommended that the ignition line be connected with the device (see vehicle connector). If the ignition line is connected, its recommended that the Wake up condition configuration parameter be set to the ignition only setting. For the vehicles in which the ignition line is not accessible, RoadLog can detect the vehicle ignition on / off status based on the vehicle synchronization data received. Therefore, if the ignition line is not connected, the Wake up condition configuration parameter should be set to the ignition or vehicle data setting. See Setting the Wake up condition If the ignition or vehicle configuration setting is chosen, the installer must verify that RoadLog is in fact receiving the ignition on / off status based on the received vehicle synchronization data. If the status is not being received, RoadLog cannot function properly. Pin No 1 Signal Name TERM15 TERM30 CAN1_H TERM31 CAN1_L 2 3 4 5 6 7 8 9 CAN1_ GND CAN 1 ground J1708 (+) RS484 line A J1708 (-) RS484 line B SPEED_ IN 10 RPM_IN 11 CAN2_H CAN2 HighLine 12 CAN2_L CAN2 Low Line 13 14 15 CAN2_ GND CAN2 ground DIGITAL_ IN1 Digital input 1 DIGITAL_ IN2 Digital input 2 16 RFU Not used 14 13 16 15 The basic cable has a total of 8 wires and only Pins 1, 2 and 4 are connected: ignition, battery ( + ) and ground ( ), respectively. The rest of the wires have to be connected according to the table below depending on the type of the vehicle. Description Terminal 15 ignition signal Terminal 30 power supply voltage CAN1 High Line Terminal 31power supply ground CAN1 Low Line Wire Color Brown Input of vehicle ignition Purpose Notes /
Connection line Red Supply line from vehicle battery (+) CAN_H connection to vehicle CAN bus
(J1939-11/15) Must be twisted together with CAN1-L wire Black Ground line, GND CAN_L connection to vehicle CAN bus
(J1939-11/15) Must be twisted together with CAN1-H wire CAN_GND connection to vehicle CAN bus
(J1939-11/15) J1708 (+) connection to vehicle SAE J1708 bus J1708 (-) connection to vehicle SAE J1708 bus Speed pulse signal input Vehicle speed pulse input from vehicle speed sensor
(ISO16844) Revolution pulse signal input RPM pulse input from vehicle engine controller ECU CAN_H connection to proprietary CAN bus (third party device connection) CAN_L connection to proprietary CAN bus
(third party device connection) CAN_GND connection to proprietary CAN bus (third party device connection) Digital input (tri-state:
not used (high-Z)/
high-level active input/
low-level active input) Digital input (tri-state:
not used (high-Z)/
high-level active input/
low-level active input) Reserved for future use Must be twisted together with CAN2-L wire Must be twisted together with CAN2-H wire 55 56 VDO RoadLog Fundamentals VDO RoadLog Fundamentals Chapter 3: VDO RoadLog Operation 1. VDO RoadLog Fundamentals RoadLog is designed to eliminate the need for paper logs, while keeping Drivers in compliance with all FMCSA Hours of Service (HOS) and Driver Vehicle Inspection Report (DVIR) regulations. Free upcoming software updates will include reporting on IFTA mileage and IRP miles and compliance with rules for Canada, Alaska and oil field. With RoadLog, a Driver can:
Automatically calculate and display HOS daily driving availability, HOS daily duty availability and HOS weekly duty availability based on the limits imposed by FMCSA regulations. Record Off Duty Status activities (RODS data). RoadLog will store the RODS data for the current day and the previous 14 calendar days. Receive audio and visual warnings before exceeding the driving and HOS duty limits and receive warnings again after exceeding the driving and HOS duty limits. Take exemptions from HOS rules when required
(personal use, emergency conditions, adverse driving conditions, 16-hour extension and 100 and 150 air-
miles radius Driver). View and print the HOS daily log for the current day as well as each of the past 14 days. Assign up to three trailers to the trip. Assign up to five shipping documents to the trip. Create, view and print pre-trip and post-trip DVIRs by entering data for the vehicle and the current trailers. Comply with roadside inspections by proving HOS logs and DVIRs via data transfer on USB or by printing them directly from RoadLogs built-in thermal printer. Record various trip activities such as meals, fueling and vehicle wash and print out Supporting Documents for these activities directly from the RoadLogs built-in thermal printer. Download vehicle data and DVIR data recorded by RoadLog over the course of the past 30 calendar days to any Fleet Key or Driver Key belonging to the logged-
in company. Carry data from one vehicle to another if he/she changes vehicles in a fleet. At the end of each days work, log out and download RODS data to the Driver Key and submit that data to the company. Operating RoadLog:
The key functions required to operate RoadLog include:
Company Log In:
Before any Driver can log in to RoadLog, the company must be logged in so that all the data can be recorded under a company account. Company log in can be done automatically with an activated Fleet Key. Note: More than one company can share a single RoadLog, but only one company can be logged in at a time. RoadLog Configuration:
RoadLog configuration requires setting vehicle and company parameters such as VIN, language preference and vehicle license plate number. Configuration data can be entered directly through the RoadLog touch screen, or data can be entered into the Fleet Software and transferred to the RoadLog via the Fleet Key. Note: Company data cannot be transferred to RoadLog via the Driver Key. Important: Serial number of the RoadLog vehicle unit needs to match the serial number provided during the tractor creation process in the Fleet Software. Driver Log In / Log Out:
Drivers must log in on their RoadLog at the beginning of the work period, whether theyre about to begin Driving or going On Duty. Drivers can log in and log out automatically, with their personalized Driver Key, or manually through the RoadLog Touch Screen, provided they were logged in with their Driver Key at an earlier time, or their Driver Profile has been uploaded to RoadLog via the Fleet Key. Data Download / Upload:
Data recorded by RoadLog is downloaded to the Driver Key for transfer to the Fleet Software. Once entered in the Fleet Software, the data can be analyzed and archived to maintain compliance with FMSCA regulations. Data can be transferred using a personalized Driver Key or the Fleet Key. When a Driver logs in with a Driver Key, RoadLog automatically uploads status data (RODS data) recorded during past work sessions. When a driver downloads or uploads data, both Driver and company-related data is transferred. 57 58 VDO RoadLog Fundamentals VDO RoadLog Fundamentals The RoadLog Hardware 1 3 2 1. Touch Screen Display 2. On/Off Button and Operation Mode 3. Standard Mount 4. Printer paper output 5. Positionable Dial 6. USB Connector 4 5 6 On/Off Button and Operation Modes When power is applied to RoadLog, it starts automatically. The splash screen is displayed during device initialization. After initialization, RoadLog enters the active mode and is fully operational. As long as RoadLog is connected to the vehicle and has power, it monitors the vehicles engine status. When the vehicle engine is on, RoadLog stays in active mode. It is not possible to turn off the device, except by disconnecting the power supply. When RoadLog is in active mode and the vehicle engine is off, pressing the On/Off button switches RoadLog to sleep mode. When RoadLog is in sleep mode, pressing the On/Off button switches RoadLog to active mode. When RoadLog is in active mode, holding the On/Off button continuously for 10 seconds causes RoadLog to reboot. The device will restart with a software startup sequence. When the engine is turned off and no USB data transfer, printing or touch screen activity occurs for five minutes, RoadLog enters sleep mode and the display automatically darkens. During sleep mode, RoadLog consumes minimal current from the vehicle battery. USB Connector A type A USB port is used to connect the RoadLog with Driver Keys, the Fleet Key or any USB flash drive formatted in FAT32 file system. CAUTION! USB devices can only be plugged into RoadLog when the vehicle is stopped!
Driving while a USB device is plugged into RoadLog may cause permanent damage to both RoadLog and the USB device. 59 60 VDO RoadLog Fundamentals VDO RoadLog Fundamentals Printer RoadLog has a built-in thermal printer to print roadside reports. Since its a thermal printer, no ink is ever required. VDO RoadLog brand paper is fade-resistant. To load the paper roll, lift the access panel at the top of the RoadLog, lay the paper roll into the cavity and pull the leading edge of the paper forward, towards the screen. The roll should be inserted so that when the paper comes out, it curls towards the back of the unit, not forward towards the screen. If the paper curls forward, take the roll out and reverse the orientation. Close the lid and tear the leading edge flush with a downward motion. Note: when a red line appears on the printout, it indicates the end of the paper roll. The roll needs to be replaced. Note: The head of the printer may get hot! Do not touch the printer head as this may cause burns!
Note: Use only VDO RoadLog brand paper rolls! Using non-
approved paper can damage the unit and void the warranty. GPS Antenna / Connector RoadLog has a built-in GPS receiver and antenna, allowing it to acquire and record position data along with RODS data. When a strong GPS signal is received, the bar below the on-screen GPS icon turns green. If the signal is not strong enough to compute location, a red bar is displayed below the on-screen GPS icon. To improve the signal reception, an external GPS antenna is available as an optional accessory. Note: Use only the VDO RoadLog external GPS antenna. Non-approved antenna may not provide correct performance. Connector Cables A variety of cable options are offered. See VDO RoadLog Installation for details. Learn more about connector cables Battery RoadLog has a built-in battery thats used to maintain the date and time if power becomes unavailable. The battery is capable of maintaining the device date and time continuously for at least 2 years. When the battery level becomes critically low, a warning screen with a low-battery icon is displayed. For information on replacing the battery, see VDO RoadLog Installation. CORRECT Roll Orientation INCORRECT Roll Orientation Touch Screen Display RoadLog is operated by tapping the touch screen with your fingers. The touch screen allows you to choose actions and type into the on-screen keyboard. When RoadLog is in the active mode the display is on. When RoadLog is in sleep mode the display is off. System Icons Depending on the screen selected, one or more of the following RoadLog icons will appear:
Home GPS signal:
Green = Good signal GPS signal:
Red = Low/no signal USB device:
Red = Remove Driver/Fleet Key When no USB device is plugged in, no icon is shown. Vehicle data:
Red = No ECM. No communication with the vehicle engine module. When vehicle data is available, no icon is shown. Trailer:
Red = No trailer(s) assigned for the trip When trailer(s) are assigned for the trip, no icon is shown. Shipment documents:
Red = No document(s) assigned for the trip When document(s) are assigned for the trip, no icon is shown. 61 62 First Device Start Up After Installation Into Vehicle Company Log In 3. Company Log In To enable all RoadLog functions, a company must be logged into the device. To log in your company:
Insert your activated RoadLog Fleet Key into the RoadLog USB port. RoadLog performs the company log in and, when complete, displays the Login Completion screen. Remove the Fleet Key from the connector. RoadLog displays the View Configuration Parameters screen. Login Completion Tap Yes to view the Configuration Parameters screen. IMPORTANT: If the RoadLog says 'This fleet key cannot be used to login the company it means that the serial number of the device is not entered in the Fleet Software under the vehicle for which that unit is intended. Configuration Parameters 2. First Device Start Up After Installation Into Vehicle After all of the installation steps as described in VDO RoadLog Device Installation are completed, RoadLog starts automatically. The splash screen is displayed during device initialization. RoadLog searches for a GPS signal while displaying the GPS Synchronization screen. Once RoadLog acquires a GPS signal, it synchronizes its system time with GPS time and displays the GPS Synchronization Successful screen. GPS Synchronization RoadLog then restarts while displaying the Logo screen. Notes: If RoadLog cannot receive a valid GPS signal, it remains in the GPS Synchronization screen. When a signal is acquired, RoadLog is able to synchronize the system only with the time, not with the vehicle location. Note: At first start-up RoadLog needs to acquire a valid GPS signal in order to initialize and set the internal clock of the system. RoadLog will remain in the GPS Synchronization screen until a valid signal is acquired and the clock has been set to the current time. During the initialization process, RoadLog performs a self-
test. If the self-test fails, it displays the Self-Test Failed screen. In this case, the device is not operational and will need to be serviced by a factory certified service provider. During the initialization process, RoadLog verifies the internal battery energy level. If RoadLog detects a low battery, it displays the Battery Replacement screen. You can tap the OK button to continue normal operation, but the battery must be replaced soon. For instructions on battery replacement, see VDO RoadLog Installation. If RoadLog is disconnected from the power supply, it will go through the same initial sequence seen at first device start up, including displaying the Settings screen for no company log in. Synchronization Successful Self-Test Self-Test Failed Battery Replacement 63 64 Configuration Parameters Configuration Parameters 4. Configuration Parameters In order for RoadLog to perform its functions, the Configuration Parameters must be set to the correct values for your vehicle. Go to the Configuration Parameters screen from the View Configuration Parameters screen during first start up, or by going to the Menu screen and tapping Settings. From the Settings screen, tap Configuration. Note: In order to be able to edit the configuration parameters, the Fleet Key must be inserted and a company must be logged in. Note: If you go to the Configuration Parameters screen from the Settings screen, RoadLog displays the Insert the Fleet Key screen to indicate that a Fleet Key is required to configure the device. If the Fleet Key is not available, tap Continue to view the current parameters. RoadLog displays the Configuration Parameters screen with the editing controls disabled. Setting Configuration Parameters At first device start up, RoadLog has default values for the configuration parameters. To change the default values, insert the Fleet Key. RoadLog displays the Fleet Key Options screen. Tap Configuration. RoadLog displays the Configuration Parameters screen. Use the up and down arrows to scroll through the parameters list. Tap Print to print the configuration parameters. Configuration Parameters Menu Settings Fleet Key Options Configuration Parameters Setting the Vehicle Synchronization Parameter The vehicle synchronization parameter defines which interface will be used to transfer the synchronization data from the vehicle to RoadLog. The following values can be chosen:
J1939: RoadLog device obtains vehicle data from vehicle J1939 data bus (the RoadLog cable connects to lines 3, 5 and 6 for communication). J1708: RoadLog obtains vehicle data from vehicle J1708 data bus (the RoadLog cable connects to lines 7 and 8 for communication). Pulse inputs: RoadLog device obtains speed pulses from the vehicle speed sensor (the RoadLog cable connects to line 9 for communication). By default, the vehicle synchronization parameter is set to J1939. To change the parameter from the Configuration Parameters screen tap Vehicle Type. RoadLog displays the Configuration Type screen. Tap Vehicle Synchronization. RoadLog displays the Configuration Type screen. Notes: If your Vehicle uses a 6-pin connector, RoadLog will synchronize with J1708. If your Vehicle uses a 9-pin connector, RoadLog will synchronize with either J1708 or J1939 connection. Generally, for Vehicles built before 2007, the 9-pin connector uses J1708. For the 2007 and newer vehicles, the 9-pin connector uses J1939. Different manufacturers transitioned between J1708 and J1939 at different times, so it is important to carry out the synchronization procedure and wait for the Communication established successfully screen to appear. 65 66 Vehicle Syncronization No Communication Established Communication established successfully Configuration Parameters Configuration Parameters Setting the Vehicle Synchronization Parameter Automatically From the Configuration Type screen tap Automatic. RoadLog uploads the parameter setting from the Fleet Key and displays the Fleet Key Configuration Value screen containing the uploaded value. Tap Accept. RoadLog displays the Configuration Type screen showing the new setting for the vehicle synchronization parameter. Setting the Vehicle Synchronization Parameter Manually To set the configuration type manually, tap Manual from the Configuration Type screen. RoadLog displays the Vehicle Synchronization screen. Select the interface to be set. Bus Synchronization Method If you select J1939 or J1708, RoadLog displays the Checking Messages Presence screen while checking that its receiving the correct data from the vehicle. RoadLog detects the relevant messages along with their source and displays the Source Selection Method screen. Automatic Message Source Method From the Source Selection Method screen, tap Automatic. RoadLog will detect and choose the preferred sources for the relevant messages and then display the Vehicle Synchronization screen. Setting the Automatic Message Source To select the sources for the relevant messages manually from the Source Selection Method screen, tap Manual and then tap Next. RoadLog displays the J1939 Messages Manual Selection or J1708 Messages Manual Selection screen, according to your selection. Vehicle odometer and vehicle speed data can come in from multiple sources. Tap the preferred source for each and tap Next when youve made the selection. RoadLog returns to the Vehicle Synchronization screen. Configuration Type Vehicle Synchronization Checking Messages Presence Source Selection Tap Done. RoadLog displays the Configuration Type screen showing the new setting for the vehicle synchronization parameter. Pulse Inputs Synchronization Method If you select Pulse Inputs from the Vehicle Synchronization screen, RoadLog displays the Configuration Parameters screen showing the new setting for the vehicle synchronization parameter. Setting the Vehicle Odometer Parameter The vehicle odometer parameter is used only when RoadLog is synchronized using the pulse inputs interface. When using pulse inputs, the odometer reading is based on the mileage entered into the Fleet Software when the vehicle record was created. Starting from this value, RoadLog automatically adds mileage based on the pulse inputs from vehicle. To set the odometer reading from the Configuration Parameters screen, tap Vehicle odometer. RoadLog displays the Configuration Type screen. Setting the Odometer Parameter Automatically From the Configuration Type screen tap Automatically. RoadLog uploads the parameter setting from the Fleet Key and displays the Fleet Key Configuration Value screen containing the uploaded value. Tap Accept. RoadLog displays the Configuration Parameters screen showing the new setting for the vehicle odometer parameter. Setting the Odometer Reading Manually From the Fleet Key Configuration Value screen Tap Manual. RoadLog displays the Edit Parameter Value screen. Select Miles or Kilometers and tap the editable field to enter the odometer value. RoadLog displays the popup keyboard. Type in the vehicle odometer reading and tap Go. RoadLog displays the Edit Parameter Value screen with the user-
defined value. Vehicle Synchronization Configuration Parameters Configuration Type Setting the Odometer Parameter Automatically 67 68 Tap Done to confirm the newly added value. RoadLog displays the Configuration Type screen showing the new setting for the vehicle odometer parameter. Setting the Odometer Reading Manually Configuration Parameters Configuration Parameters Setting the VIN Automatically Configuration Type Setting the Vehicle Identification Number
(VIN) By default, the VIN parameter is set to 00000000000000000. To enter the actual VIN from the Configuration Parameters screen, use the arrows to scroll to the VIN line and tap the VIN. RoadLog displays the Configuration Type screen. Setting the VIN Automatically From the Configuration Type screen, tap Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the uploaded value. Setting the VIN Manually From the Configuration Type screen, tap Manual. RoadLog displays the Edit Parameter Value screen. Tap the editable field to enter VIN. RoadLog displays the popup keyboard. Type in the vehicle odometer reading and tap Go. RoadLog displays the Edit Parameter Value screen with the value that was typed in. Tap Done. RoadLog displays the Configuration Parameters screen showing the new setting for the VIN. Setting the Wake up condition The Wake up condition is the event that triggers the device to begin recording data. If the ignition line is connected during installation, its recommended that the Wake up condition configuration parameter be set to the ignition only setting. If the ignition line was notconnected during installation, the Wake up condition configuration parameter should be set to the ignition or vehicle data setting. Setting the Wake up condition Automatically From the Configuration Type screen, tap Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the uploaded value. Setting the Wake up condition Manually From the Configuration Type screen, tap Manual. RoadLog displays the Wake up condition screen. Chose the desired wake up source using the radio buttions. Tap Done. Setting the Vehicle License Plate Number
(VLPN) From the Configuration Parameters screen, use the arrows to scroll to the VLPN line and tap the VLPN line. RoadLog displays the Configuration Type screen. Setting the Vehicle License Plate Number (VLPN) Automatically From the Configuration Type screen, tap Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the uploaded value. Setting the Vehicle License Plate Number (VLPN) Manually From the Configuration Type screen, tap Manual. RoadLog displays the Edit Parameter Value screen. Tap the editable field to enter the VLPN. RoadLog displays the popup keyboard. Type in the vehicle VLPN and tap Go. RoadLog displays the Edit Parameter Value screen with the value that was typed in. Tap Done. RoadLog displays the Configuration Parameters screen showing the new setting for the VLPN. Setting the Vehicle Type The Vehicle Type parameter must be set based on the vehicle type in which RoadLog is installed. There are three Vehicle Types:
1. Property-carrying Vehicle with Trailer If this is the selection made, RoadLog performs the HOS availability calculation for any logged in Driver according to the HOS rules for property-carrying vehicles. The Driver is required to inspect the trailer if equipped and enter a record for trailers attached to the vehicle. The vehicle type selection must be property-carrying vehicle with trailer. 2. Property-carrying vehicle without trailer If this is the selection made, RoadLog performs the HOS availability calculation for any logged in Driver according to the HOS rules for property-carrying vehicles. 3. Passenger-carrying vehicle If this is the selection made, RoadLog performs the HOS availability calculation for any logged in Driver according to the HOS rules for passenger-carrying vehicles. Setting the VLPN Manually Vehicle Type 69 70 Configuration Parameters Configuration Parameters By default, the vehicle type is set to property-carrying vehicle with trailer. To change the setting from the Configuration Parameters screen, use the arrows to scroll to the Property with trailer line. Tap the line. RoadLog displays the Configuration Type screen. Setting the Vehicle Type Automatically From the Configuration Type screen, select Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the Vehicle Type that was entered in the Fleet Software for the vehicle. Setting the Vehicle Type Manually Vehicle Details From the Configuration Type screen, select Manual. RoadLog displays the Vehicle Type screen. Tap the selection you want and tap Done to confirm the selection. Tap the selection you want and tap Done to confirm the selection. RoadLog returns to the Configuration Parameters screen. Setting the Printing Speed Vehicle Type RoadLogs built-in printer can be set to print at low speed or high speed. At low speed, the RMS current consumption is approximately 1A. At high speed the RMS current consumption is approximately 3A. CAUTION: Before choosing high printing speed, be certain your line can supply the 3A necessary. Insufficient power can cause the unit to shut down, data loss and other unpredictable behavior. If uncertain of your power supply, consult the vehicle manufacturer. By default, the printing speed is set to low speed. To change the printing speed from the Configuration Parameters screen, use the arrows to scroll to the Printing speed line. Tap the line. RoadLog displays the Configuration Type screen. Setting the Printing Speed Automatically From the Configuration Type screen, select Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the printing speed for the vehicle that was entered in the Fleet Software. Setting the Printing Speed Manually From the Configuration Type screen, select Manual. RoadLog displays the Printing Speed screen. Tap the selection you want and tap Done to confirm the selection. RoadLog returns to the Configuration Parameters screen. Setting the W Factor Set Printing Speed Manually The vehicles W factor is the number of pulses that are generated by the vehicle speed sensor when the vehicle travels a distance of 1 kilometer. The vehicle W factor is used only when RoadLog is synchronized with the vehicle using the pulse inputs interface, which is uncommon. In this case, the W factor is used by RoadLog to calculate the vehicle distance travelled. By default, the W factor parameter is set to 8,000 pulses/
km. There are three ways to change the W factor value. To change the W factor from the Configuration Parameters screen, use the arrows to scroll to the W factor line. Tap the line. RoadLog displays the Configuration Type screen. Setting the W Factor Manually From the Configuration Type screen, select Manual. RoadLog display the Edit Parameters Value screen. Tap the editable field to enter the W factor. RoadLog displays the popup keyboard. Type in the W factor and tap Go. RoadLog returns to the Configuration Parameters screen. Setting the W Factor Automatically From the Configuration Type screen, select Automatic. RoadLog displays the Fleet Key Configuration Value screen showing the W factor that was entered in the Fleet Software for the vehicle. Tap Accept. RoadLog returns to the Configuration Parameters screen. Setting the W Factor by Measurement If you are not certain of the vehicles W factor, you can determine it by driving and entering the initial and final odometer values. From the Configuration Parameters screen, use the arrows to scroll to the W factor line. Tap the line. RoadLog displays the Configuration Type screen. Tap Measure. RoadLog displays the Odometer Initial Value screen. Select miles or kilometers and tap the editable field Enter W Factor Manually 71 72 Configuration Parameters Configuration Parameters to enter the odometer value at the start of the test trip. RoadLog displays the Keyboard screen.Type in the vehicle odometer reading and tap Go. RoadLog displays the Odometer Initial Value screen with the value for odometer entered. Tap Done. RoadLog displays the Odometer Final Value screen. Drive the vehicle at least 5 miles. Note: The longer the trip distance, the more accurate the W factor measurement is. At the end of the test trip, when the vehicle is stopped, tap the editable field in the Odometer Final Value screen. RoadLog displays the Keyboard screen. Type in the vehicle odometer reading and tap Go. RoadLog displays the Odometer Final Value screen with the value for odometer entered. Tap Calculate W factor. RoadLog calculates the W factor and displays the W Factor Value screen. Odometer Initial Value Tap Accept. RoadLog displays the W Factor Value screen showing the new setting for the W factor parameter. Odometer Final Value Note: As the Vehicle is driven, RoadLog will compare distance measured by GPS against distance calculated using the W factor. If there is a significant discrepancy between the distance calculated by the use of W factor and the GPS coordinates, the system will go into the no ECM mode, and calibration will need to be repeated. Saving new Configuration Parameters to the Fleet Key Whenever vehicle parameters are entered into RoadLog in the vehicle, youll want to transfer those parameters to the RoadLog Fleet Software. To save new configuration parameters to the Fleet Key, insert the Fleet Key into RoadLog. From the Configuration Parameters screen, tap Update all. Then tap Save. RoadLog displays the Configuration Person Name screen. Tap the first name field to enter the first name of the person updating the Configuration Parameters. RoadLog displays the Keyboard screen. Type in the first name and tap Go. RoadLog displays the Configuration Person Name screen with the first name entered. Enter the last name and tap Go. Configuration Person Name Tap Done. RoadLog displays the Fleet Key Update screen. Tap Yes to update the values saved on the Fleet Key, or tap No to save the changes to RoadLog, but leave the values unchanged on the Fleet Key. RoadLog displays the Transfer in Progress screen during data transfer and the Configuration Update Completed screen when data transfer is completed. Tap OK. RoadLog displays the Configuration Completed screen to indicate that the Configuration process has been completed successfully. Unplug the Fleet Key. RoadLog displays the Menu screen. Note: The Menu screen serves as the home screen when a company is logged in but no Drivers are logged in. The Menu screen can also be reached by tapping Menu on the Driver Overview screen. Transfer in progress Configuration Completed 73 74 The User Settings Menu The User Settings Menu 5. The User Settings Menu In addition to Configuration, the Settings menu screen choices include Illumination and Language buttons that allow the user to customize the display settings. The Diagnostic button allows users to see the diagnostic events, check on the diagnostic status and run the memory self test. The About button takes you to a display of the Serial Number, Hardware Version (HW) and Software Version (SW) number of your RoadLog. The About screen also provides a link to legal information about the RoadLog system. Settings Adjusting Illumination At first power up, the screen illumination is set to maximum brightness. To adjust the screen brightness from the Settings screen tap Illumination. RoadLog displays the Display Illumination screen. Use the up and down arrows to adjust screen illumination to the desired level. Tap Save to save the current illumination level. Tap Back to go to the Settings screen. Display Illumination Note: If the RoadLog vehicle synchronization calibration parameter is configured to J1939, and it receives illumination level data from the vehicle, RoadLog will use the vehicle illumination setting instead of the RoadLog user setting. Change Language RoadLog uses English as the default language at first start up. To change the language from the Settings screen, tap Language. RoadLog displays the Language screen. Select the new language by tapping the corresponding button. RoadLog sets the selected language and returns to the Settings screen. Language Diagnostic Functions You can view RoadLogs diagnostic status, view historical diagnostic events or perform a device self-test. To perform a diagnostic function from the Settings screen tap Diagnostic. RoadLog displays the Diagnostics screen. Tap Diagnostic Status to display the Diagnostic Status screen showing the status of Vehicle synchronization, ignition, GPS, position and time. Tap Diagnostic Events to display the Diagnostic Events screen showing the history of diagnostic events. Note: See Diagnostic events list for explanation of the diagnostic codes. Tap Print to print the diagnostic events list. Diagnostics Diagnostic Status Tap Back to return to the Diagnostics screen. Diagnostic Events Tap Self-Test to start a self-test. RoadLog displays the Self-
Test in Progress screen. When the self-test is successfully completed, RoadLog displays the Self-Test Passed screen. Tap OK to return to the Diagnostics screen. Note: If the self-test fails, RoadLog displays the Self-Test Failed screen. In this case, the device is not operational and will need to be serviced by a factory certified service provider. About RoadLog Device Information You can view the Serial Number, Hardware Version (HW) and Software Version (SW) number of your RoadLog. From the Settings screen tap About to display the About screen. Tap Back to return to the Settings screen. You can also view legal information from the About screen by tapping Legal Information. Self-Test in Progress About 75 76 Daily Operations Daily Operations 6. Daily Operations Once RoadLog has been installed, the Company has been logged in and first start up procedures have been completed, RoadLog is ready for daily operational use. When you start the engine, RoadLog will automatically go from sleep mode to active mode. Note: If no Driver is logged in at start up, youll see the Menu screen. From here you can log in, review the DVIR or view the RoadLog settings. Driver Log In At the start of each workday, Drivers must log in to RoadLog in order to record their duty status and activities for that day. Drivers can log in automatically with their Driver Key or manually. Automatic Log In with the Driver Key To log in to RoadLog automatically, insert your Driver Key into the USB port. RoadLog displays the Preview Availability screen. Data displayed includes:
Driver: Name of the Driver logging in. Last status: Last duty status recorded for the Driver and the date and time when the duty status was set. Driving time left: Remaining driving time allowed for the Driver. Availability reset: Time of the day when the HOS calculations will be reset. Note: If its your first log in, or RoadLog detects there is not sufficient historical data for HOS availability calculation, RoadLog will not be able to calculate Driving time left, and it displays the Not Sufficient RODS Data screen. It will take a 24 hour period from the first Driver log in for the system to be able to calculate Driving time left and Daily Duty Availability. It will take 34 consecutive hours of off duty time to show Weekly duty availability. Enter your Status Tap the appropriate button for your current status to let the system know if youre coming on as a Driver, going On Duty, going in the Sleeper Berth, or driving for Personal Use. Note: If youre logging in as a team, one person must select Driver and the other person(s) On Duty. RoadLog will record HOS data for each person based on your duty status selections. Initial Status Your next step will depend on whether you are the first Driver to log in and whether there are Trailers and/or Shipping Documents assigned to the vehicle. In either case, youll need to perform all necessary DVIR procedures when starting your trip. If you are the first driver to log in as Driving, and current resources are assigned in RoadLog, you must choose whether to keep or discard the Trailers and/or Shipping Documents that have been assigned as current resources. After making your choices, youll perform a DVIR. If Trailers and/or Shipping Documents are already confirmed by a previous Driver, youll be asked to Keep the current resources, to confirm that resources have not changed. After confirming the resources, youll perform a DVIR. Automatic status updates Once youve logged in, RoadLog will update your status automatically theres no need to select a status change from the Driver Overview options menu. When you travel over 2 miles, RoadLog will automatically put you in Driving (D) status. When the vehicle is stationary for five minutes, RoadLog will automatically put you in On Duty status (ON). Note: You can manually select Sleeper Berth (SB) or Personal Use (PS) from the Driver Overview options menu, whenever the vehicle is not traveling. Driver Overview Options Tap Continue to continue. RoadLog displays the Initial Status screen. Not Sufficient RODS Data 77 78 Daily Operations Daily Operations Vehicle motion screen When vehicle motion is detected, the Vehicle Motion screen is displayed regardless of whether or not a Driver is logged in. Managing Resources Vehicle Motion If current resources are assigned in RoadLog, and you are the first Driver to log in, RoadLog displays Keep Current Resources screen that lists the trailers or Shipping Documents as current resources. If you want to keep current resources, tap Yes. Tap No if you want to discard them. Keep Current Resources Confirm DVIR Data Driver Overview options Add Trailer If you are not the first Driver to Log In:
From the Driver Overview Options menu screen, tap Resources. Confirm your Resources, including Assets
(tractor and trailers), Shipping Documents (Bills of Lading or Manifest Numbers, Pro, etc. ) and Supporting Documents (fuel receipts, meal receipts and vehicle wash receipts, etc.), RoadLog displays Confirm DVIR Data screen. Confirm your Data, then tap Next. RoadLog will ask you to perform a DVIR inspection and enter your findings. If resources such as trailers or Shipping Documents do not exist, you first need to add them. From the Driver Overview options menu screen, choose Resources > Trailers > Add. In the Add Trailer screen, tap the Trailer ID field to bring up the Keyboard. Type in your Trailer information and tap Go. Tap Add to save Trailer info. Follow the same procedure if no Shipment Documents exist. From the Driver Overview options menu screen, choose Resources > Shipping Documents > Add. In the Add Shipping Document screen, tap the Shipping Document Number field to bring up the Keyboard. Type in your document information and tap Go. Tap Add to save Shipping Document info. Manual Log In If the Driver Key is not available, Drivers can log in manually. Note: This is the EMERGENCY procedure in case the Driver Key is lost or damaged. To log in manually, Drivers must have already been entered into the Fleet Software, and their identity must have already been transferred from the Fleet Software to RoadLog via the Fleet Key. See Company Data Transfer. To log in manually from the Menu screen tap Driver Login. RoadLog displays the Driver Login screen. Driver Login Tap the Driver ID field. RoadLog displays the Keyboard screen. Enter your Driver ID and tap Go (note Driver ID is CAP/
lowercase sensitive). RoadLog displays the Driver Login screen. Check your entry and tap Login. RoadLog displays the Preview Availability screen. You can now follow the same log in steps you would had you logged in with a Driver Key. See: Automatic log in with the Driver Key. Note: If you select Personal Use from the Initial Status screen, and another Driver is already logged under Personal Use, RoadLog displays the Force Personal Use Driver Logout screen. Preview Availability Tap Force Logout to continue log in under Personal Use. The current Personal Use Driver will be logged out from RoadLog. Note: If five Drivers are currently logged in, and a new Driver attempts to log in, RoadLog displays the Maximum Logged In Drivers screen. Select a Driver to force log out and tap Force Logout to continue log in process. The selected Driver is now logged out. Maximum Logged In Drivers 79 80 Add Shipment Document Daily Operations Daily Operations Manual Location Entry During log in, if RoadLog does not receive a sufficiently strong GPS signal, it displays the Manual Location Entry screen. Tap on the Location state field to bring up the pop-up keyboard. Tap the first letter(s) of your current state (the auto complete feature suggests the first state that begins with the typed letters). Tap Go if the suggested state is where you are,or tap List to see other states matching the typed letters. Pick your current state from the list and tap Go. In Location place, enter the city or town closest to your location, as you did your Location state. When complete, tap Continue to continue the log in process. Performing DVIRs at Log In and Log Out At each log in or log out, RoadLog will prompt the Driver to perform a DVIR. In the DVIR process, you will:
Confirm location and odometer reading. Confirm defects and/or repairs to defects on the vehicle and trailer(s). Location entry Add any defects found during your inspection. Confirm that there are no defects or need for repairs and that the vehicle and trailer(s) are in good working order. Confirm DVIR Data When logging in, you will be prompted to begin a DVIR after confirming resources. When logging out, you will be prompted to begin a DVIR after viewing your logs. During roadside inspections, you will be able to print DVIR reports directly from RoadLogs built-in thermal printer, or download and transfer DVIR records via USB. For procedures on creating and printing DVIRs see Creating DVIRs. DVIR Defect Details Driver Overview The Driver Overview screen lets Drivers check the remaining time theyre allowed to spend in On Duty or Driver status. Data displayed includes:
Country used for HOS regulations. Driver: Name of the Driver. Status: Drivers current duty status. Driving time left: Progress bar indicating the remaining driving time allowed for this Driver. When the remaining allowed driving time is less than 30 minutes, the progress bar color will change to red. Daily duty availability: Available On Duty time remaining Driver Overview for the current day. Weekly duty availability: Available On Duty time remaining for the current week. Gain time in: Time the Driver must wait before driving the vehicle. If there are other Drivers logged in, you can tap Next Driver to display the Driver Overview screen for other logged in Drivers. To view more Driver overview options, tap More. RoadLog displays the Driver Overview Options screen. The Driver Overview Options Screen:
Menu choices from this screen include:
Change Status: Choose from Driver, On Duty, Sleeper Berth or Personal Use. Driver Login: Allows additional Drivers to log in manually. If the fleet manager has entered Drivers in the RoadLog Fleet software and transferred the list into the RoadLog, each Driver entered can log in without their Driver Key by tapping the Driver Login button. View Logs: View, edit and print your log. Driver Options: Enter Exemptions and Pre-Trip and Post-trip activities. Resources: View and edit records for documents, trailers and assets. Status Lock: Allows you to disable the automatic switch from Driving to On Duty whenever t he vehicle stops
(see details below). Driver Logout: Starts the log out process at the end of the trip. View DVIR: View and edit DVIRs. Menu: Shows the top-level navigation choices seen after company log in, including Driver Login, Driver Overview and Settings. Roadside Inspection: Allows Driver to provide authorized inspection personnel with HOS data, either as a print out or as a download to USB drive. Driver Overview options 81 82 Daily Operations Daily Operations Company Data Transfer The Fleet Key is used not only to run the Fleet Software but also to transfer company data to and from the RoadLog(s) installed in your vehicle(s). With your Fleet Key you can:
Download company data from RoadLog to the Fleet Key. Update the company tractors and trailers files on the Fleet Key with the tractors and trailers data from RoadLog. Update the company assets file on the Fleet Key with assets parts list data from RoadLog. Upload the company support data from the Fleet Key to RoadLog. To perform these transfer functions, insert your Fleet Key into RoadLog. The Fleet Key Options screen will be displayed. Tap Company Data Transfer. RoadLog displays the Fleet Key Data Transfer screen. Download Company Data To download company data from RoadLog to the Fleet Key from the Fleet Key Data Transfer screen, tap Download. RoadLog displays the Fleet Key Files Download screen. Fleet Key Data Transfer Use the up and down arrows to scroll through Fleet Key Files Download screens. From the Fleet Keys Files Download Company Files and Fleet Keys Files Download Driver Files screens, select the files to be downloaded and tap Download. RoadLog displays the Transfer in Progress screen during data transfer and the Data Download Completed screen when data transfer is completed. Update the Company Tractors File Fleet Key Files Download To update the company tractors file on the Fleet Key with the tractor data from RoadLog device, tap Update Company Tractors File from the Fleet Key Data Transfer screen. RoadLog displays the Transfer in Progress screen during data transfer and the Tractors List Update Completed screen when the update is completed. Tap OK. RoadLog displays the Fleet Key Options screen. Tractors List Update Completed Update the Company Assets File To update the company Assets file on the Fleet Key with the Assets data from RoadLog, tap Update Company Assets File from the Fleet Key Data Transfer screen. RoadLog displays the Transfer in Progress screen during data transfer and the Assets Parts List Update Completed screen when the update is complete. Tap OK. RoadLog displays the Fleet Key Options screen. Assests Parts List Update Completed Upload the Company Support Data Lists To upload the company support data lists from the Fleet Key to RoadLog from the Fleet Key Data Transfer screen, tap Update Company Support Data. RoadLog displays the Company Support Data Lists screen. Use the up and down arrows to scroll through the Company Support Data Lists screens. Select the lists to be uploaded and tap Update. When the upload is completed, RoadLog displays the Support Data Update Completed screen. When all data transfers are complete, remove the Fleet Key from USB port. RoadLog displays the Menu screen or Driver Overview screen, depending on the log in status. Data Download to a normal USB Flash Drive You can download data from RoadLog to a Driver Key, Fleet Key or any regular USB flash drive that has been formatted in the FAT32 file system. Company Support Data Lists Support Data Update Completed To download data to a normal USB flash drive, insert it into the USB port. RoadLog displays the USB Flash Drive Options screen. Download FIles Tap Data Download to display the Download Files screen. Select the files to be downloaded by tapping on the corresponding check box. Tap Download to start the data transfer. RoadLog displays Transfer in Progress screen during data transfer and Data Download Completed screen when the data transfer is complete. 83 84 Daily Operations Daily Operations Unplug the USB key from the RoadLog and tap OK. RoadLog returns to the Settings screen. Notes: If the inserted USB flash drive is not formatted in FAT32, RoadLog will display the Unknown USB Device screen. If the inserted USB flash drive contains too much data, RoadLog will display the USB Flash Drive Full screen. If an error is detected during data transfer, RoadLog will display the Data Transfer Failure screen. Change Status To change the duty status of a logged in Driver, tap Change Status from the Driver Overview options screen. RoadLog displays the Change Status screen. Tap on the button for the duty status selection. RoadLog assigns the new HOS duty status and goes to the Driver Overview screen. Status Lock RoadLog detects when the vehicle stops and automatically changes the status of the logged in driver to On Duty. However, in some situations, such as severe traffic jams, the Driver may want to disable this feature by using the Status Lock function. When Status Lock is on, RoadLog will keep the current Driver status as Driving, even when the vehicle has stopped and the ignition is off. USB Flash Drive Full Change Status To enable Status Lock, Tap Status Lock from the Driver Overview Options screen. Driver Overview Options To disable Status Lock, tap Status Lock again. Status Lock is automatically disabled when the Driver logs out or RoadLog enters sleep mode. View Logs (Grid) RoadLog allows the Driver to view recorded logs for the current as well as each of the past 14 days. To review your logs from the Driver Overview Options screen, tap View Logs. RoadLog displays the View Logs
(Grid) screen. Note: The View Logs (Grid) screen is displayed automatically when the Driver Key is inserted at log out. Use the upper horizontal arrows to scroll through the selected day. Use the lower horizontal arrows to scroll through logs recorded for the current and past 14 days. Use the + and - buttons to zoom in and out on the grid. Check your logs: Use the arrow buttons at the bottom of the screen to change the selected date (the current and previous 14 days can be selected). Check recorded logs. If they are correct and you want to complete log out, tap Submit to finish the viewing session. However, you can view additional log information before you log out. Tap More for further viewing options. RoadLog displays View Logs (More) screen. View Logs (More) The View Logs (More) screen provides access to other screens where you can view Log Details, Log Events and Details on the Company logged in. It also provides links to the Driver Overview screen and the View Logs (Grid) screen. You can also print Logs from the View Logs (More) screen. View Logs (Details) RoadLog records and displays details for the Drivers workday. To view the details from the View Logs (Details) screen, highlight any item tap Details. RoadLog displays the View Logs (Details) screen. To review log details, use the up and down arrows to scroll through the list of details. Use the left and right arrows to scroll through recorded logs from the last seven days. Details displayed include:
View Logs (Grid) View Logs (More) Amount of On Duty time for the past 7 days. View Logs (Details) Total distance driven for the current day. Companies for which the Driver worked. Note: to view Company details, select any one of the Companies and tap Details. RoadLog displays the Company Details screen. 85 86 Daily Operations Daily Operations Names of Co-Drivers. Vehicles used by the Driver. Note: to view vehicle details, select any one of the vehicle identification numbers and tap Details. RoadLog displays Vehicle Details screen. Trailers used by the Driver. Shipment Documents used by the Driver. View Logs (Events) RoadLog records a list of events, such as lunch, rest and fueling for the logged in Driver. You can view events and add annotations from the View Logs (Events) screen. To see a list of recorded events from the View Logs (More) screen, tap Events View. RoadLog displays the View Logs
(Events) screen. From the View Logs (Events) screen check the duty status records and events recorded during your log in session. Use the up and down arrows to view the list of recorded events for the selected day. Use the left and right arrows to scroll through the current and past 14 days recorded events. Note: If you want to see details for a highlighted event, tap Details to view the selected records details. RoadLog displays the Event Details screen. Event Details To add a remark to a recorded event shown in the View Logs (Events) screen, highlight the event. Then tap Details. RoadLog displays the View Logs (Details) screen. Tap on any detail to add a remark. Then tap Details. RoadLog displays the Event Details screen. Use the up and down arrows to scroll through the list of details for each event. Select the detail you want to annotate by highlighting and tapping it. View Logs (Events) Then, tap in the remark field. RoadLog displays the popup keyboard. View Logs (Details) Type in the remark, or annotation, you want to add. Tap OK on the Event Details screen to save your remark. RoadLog returns to the View Logs (Events) screen. When you have reviewed all events and completed all annotations, tap Submit to return to the Driver Overview screen. Event Details View Logs (Office) View Logs (More) View Logs (Office) From the View Logs (More) screen, tap Office. RoadLog displays the View Logs (Office) screen showing details for the currently logged in company:
Company ID number Company Name Company Address Tap More to return to the View Logs (More) screen, or tap Submit to return to the Driver Overview screen. Driver Log Out At the end of the working day, Drivers must log out from RoadLog. Drivers can log out automatically with their Driver Keys, or they can log out manually on screen. When logging out automatically, recorded data will be automatically downloaded to the Driver Key. When logging out manually, recorded data is stored in the RoadLog. Manual Log Out:
To log out manually from the Driver Overview screen, tap More. Tap Driver Logout. RoadLog displays the Insert Driver Key screen. Tap Continue. RoadLog displays the View Logs (Grid) screen. Check recorded logs. If they are correct and you want to complete log out, tap Submit to finish the viewing session. However, you can view additional log information before you log out. Tap More for further viewing options. Automatic Log Out with the Driver Key:
Insert Driver Key View Logs (Grid) To log out automatically with the Driver Key, insert the Driver Key into the USB port. RoadLog displays the Driver Key Options screen. Tap Logout. RoadLog displays the View Logs (Grid) screen. Check recorded logs. If they are correct and you want to complete log out, tap Submit to finish the viewing session. However, you can view additional log information before you log out. Tap More for further viewing options. 87 88 Daily Operations Trailer management Data Download at Driver Log Out At Driver Log Out, RoadLog files are transferred automatically to the Driver Key. If you are the last logged in Driver, when you log out, RoadLog displays the Confirm DVIR Data screen. If you are not the last logged in Driver, RoadLog displays the Transfer In Progress screen immediately after you tap Submit. If you are the last logged in Driver, when you log out, you must perform the DVIR post-trip inspection for current assets assigned to the vehicle, confirming or editing defects. You can print a DVIR report at this time and / or download the data to the Driver Key. For the DVIR procedure see Creating DVIRs. Data Download without Log Out Driver data can also be downloaded to the Driver Key without logging out. Insert the Driver Key. RoadLog displays the Driver Key Options screen. Tap Download Data. RoadLog displays the Driver Key Files screen. Use the Up ad Down arrows to scroll through the list of available files. Tap the check boxes to select the files you want to download. When your selections are made, tap Download. Roadlog displays the Confirm Review/Submit RODS screen. Tap Yes to confirm your choices. RoadLog displays the View Logs (Grid) screen. Tap Submit to initiate file download. RoadLog displays the Transfer in Progress screen while transferring the data and the Data Download Completed screen when it is finished. Tap OK. RoadLog returns to the Driver Overview screen. After the download the Driver will remain logged in to RoadLog. Printing Logs To print the current HOS Daily Log from the View Logs
(More) screen, tap Print. When completed, RoadLog returns to the View Logs (Grid) screen. Note: In addition to viewing logs as part of the log out, you can also view logs anytime from the Driver Overview Options screen. Tap View Logs. RoadLog displays View Logs (Grid) screen. Confirm DVIR Data Transfer in Progress Driver Key Options Driver Key Files Confirm Review/Submit RODS 7. Trailer management Whenever a trailer is attached or detached from a vehicle, the Driver must add or remove it from RoadLogs database. RoadLog allows you to assign up to three trailers per vehicle. When attaching a trailer, the Driver must perform a pre-trip inspection and DVIR. When removing a trailer, the Driver must perform a post-trip inspection and create a DVIR. For the DVIR procedure see Creating DVIRs. Adding a Trailer To add a trailer to RoadLogs database, tap More from the Driver Overview screen. RoadLog displays the Driver Overview Options screen. Tap Resources. RoadLog displays the Resources screen. Tap Trailers. RoadLog displays the Current Trailers List screen showing any previously attached trailers. Tap Add button to add a new trailer. RoadLog displays the Add Trailer screen. From the Add Trailer screen, tap the Trailer ID field to bring up the Keyboard. Type the first digit(s) of the trailer number you want to add. If a list of trailers has been entered from the Fleet Software, RoadLog suggests a trailer number matching the digits typed. If the trailer number you want to add is different than the suggested one, tap List to view other pre-stored trailer numbers matching the typed characters. Pick the correct trailer number from the list and tap Go. If no list of trailers has been entered from Fleet /Software, or if the trailer you wish to add is not in the stored list, tap Add from the Current Trailers screen. RoadLog displays the Keyboard screen. Type in the Trailer ID for the trailer you want to add, then tap Go. RoadLog displays the Add Trailer screen. If the ID is correct, tap Add. RoadLog displays the Confirm DVIR screen - each time you add a trailer, you must perform a DVIR. 89 90 Resources Current Trailers Add Trailer Trailer management Shipment Documents management When the DVIR is complete, tap Done. RoadLog displays the Resources screen. Removing a Trailer To remove a trailer from RoadLogs database, tap More from the Driver Overview screen. RoadLog displays the Driver Overview Options screen. Tap Resources. RoadLog displays the Resources screen. Tap Trailers. RoadLog displays the Current Trailers List screen showing the attached trailers. Tap on the trailer you want to remove and then tap Remove. RoadLog displays the Confirm DVIR Data screen before removing a trailer, you must perform a post-trip inspection and create a DVIR for it. When the DVIR is complete, tap Finish. RoadLog displays the Current Trailer List screen, showing the newly added trailer in the Current trailers list. For the DVIR procedure see Creating DVIRs. 91 8. Shipment Documents management RoadLog allows Drivers to include Shipping Documents such as Bills of Lading, Manifest Numbers, or Pro documents, as part of your data record. Whenever a Shipment Document is added or removed, the Driver must add or remove it from RoadLogs database. RoadLog allows you to assign up to five Shipment Documents per trip. To add a shipment to RoadLogs database, tap More from the Driver Overview screen. RoadLog displays the Driver Overview Options screen. Tap Resources. RoadLog displays the Resources screen. Tap Shipment Documents. RoadLog displays the Current Documents List screen. Tap Add to add a new Shipment Document for the trip. RoadLog displays the Add Shipment Document screen. Tap on the Shipment document number field. RoadLog displays the Keyboard screen. Type the first character(s) of the shipment document ID you want to add. RoadLog uses its auto-complete feature to suggest a Shipment Document number from the available shipment documents in its memory. If the Shipment Document you want to add is different than the suggested one, tap List to view other pre-stored Shipment Document numbers matching the typed characters. Pick the correct Shipment Document ID and tap Go. If no list of Shipment Documents has been entered from Fleet Software, or if the Shipment Document you wish to add is not in the stored list, tap Back to go to the Keyboard screen. Type in the complete document number and then tap Go to continue. RoadLog displays the Add Shipment Document screen. If the ID is correct, tap Add. RoadLog displays the Current Documents List screen, showing the newly added shipment document. When the Current Documents List is complete, tap Done. RoadLog returns to the Resources screen. To remove a Shipment Document from the Resources screen, tap on Shipment Documents. Highlight the document you want to remove, and tap Remove. When finished, tap Done to return to the Resources screen. 92 Current Shipment Documents Add Shipment Documents Current Shipment Documents Supporting Documents Supporting Documents 9. Supporting Documents RoadLog allows you to create different types of Supporting Documents such as fuel receipts, meal receipts and vehicle wash receipts. Predefined types of Supporting Documents can be created in the Fleet Software and transferred to RoadLog via data upload from the Fleet Key, other Supporting Document types can be created, as needed, in RoadLog. Supporting Documents are created both automatically by RoadLog as well as manually by the Driver. Supporting Documents are stored as data records in RoadLog and are also printed out from RoadLogs built-in thermal printer. Whenever the Driver creates a Supporting Document for the trip, it must be added to RoadLogs database. Generating a Supporting Document Automatically RoadLog automatically generates Supporting Documents in the following circumstances:
The Driver performs a roadside inspection. OR The Driver performs a post-trip inspection DVIR and reports the defects found. Generating a Supporting Document Manually To manually generate a Supporting Document and add it to RoadLogs database, tap More from the Driver Overview screen. RoadLog displays the Driver Overview Options screen. Tap Resources. RoadLog displays the Resources screen. Tap Supporting Documents. RoadLog displays the Supporting Documents screen. Tap Generate Supporting Documents. RoadLog displays the Generate Supporting Document screen. Supporting Documents Tap on the Activity Type field. RoadLog displays the Keyboard screen. Type in the first character(s) of the Activity Type you wish to link to the supported document. RoadLog uses its auto-complete feature to suggest an activity from the available Supporting Documents Activities List in its memory. If the activity you want to add is different than the suggested one, tap List to view other pre-stored Supporting Documents activities matching the typed characters. Tap on the selected activity, and then tap Go. If no list of Supporting Document activities has been entered from Fleet Software, or if the Supporting Document activity you wish to add is not in the stored list, tap Back to go to the Keyboard screen. Type in the complete Activity Type name and then tap Go to continue. RoadLog displays the Generate Supporting Document screen. If the Activity Type is correct, tap Generate. The Supporting Document for the selected Activity Type is added to the RoadLogs database. RoadLog prints the Supporting Document while displaying the Printing in Progress screen. Once the printing is complete, the SD Generation Completed screen is displayed. Tap OK. RoadLog displays the Supporting Documents screen. If you want to view the Supporting Documents generated, tap View Supporting Documents from the Supporting Documents screen. RoadLog displays View Supporting Documents screen. Generate Supporting Documents Printing in progress View Supporting Documents 93 94 Supporting Documents Vehicle Inspection Reports: Creating DVIRs Select the Supporting Document you want to view by tapping it. Once a document is selected, tap View Details. RoadLog displays the View SD Details screen. Tap Print to print the Supporting Document details or Back to return to the Supporting Documents screen. Veiw SD Details 10. Vehicle Inspection Reports: Creating DVIRs Performing DVIRs RoadLog allows you to create the legally required Driver Vehicle Inspection Reports (DVIR) for the following vehicle assets:
Tractor inspection Trailer inspection Pre-trip and post-trip inspections can be performed. You can also view the recorded inspection reports. RoadLog automatically prompts the Driver to perform a pre-
trip inspection in the following circumstances:
A Driver logs in A logged-in user changes duty status to Driver A trailer is attached to the vehicle The Confirm DVIR Data screen will appear automatically whenever any of the three actions above occurs. Pre-trip Inspection You are required to check the safety of the vehicle before driving and to check whether any defects recorded during the previous post-trip inspection have been fixed. You must then record the results of your inspction in a Pre-trip DVIR. Creating a Pre-trip DVIR When the Driver logs in and selects the Driving status, RoadLog prompts the user to perform a pre-trip DVIR for the vehicle and current trailer(s). At the start of the pre-trip DVIR, RoadLog displays the Confirm DVIR Data screen. After checking the vehicle location and odometer reading, tap Next to continue with the DVIR pre-trip inspection. RoadLog displays the DVIR Menu screen. Confrim DVIR Data 95 96 Vehicle Inspection Reports: Creating DVIRs Vehicle Inspection Reports: Creating DVIRs DVIR Menu Login Completion Use the up and down arrows to scroll through the Asset list. DVIR Assets The DVIR Menu screen provides a list of the assigned assets (tractor and current trailer(s)). The Assets in bold text have a viewable DVIR, indicating that a post-trip inspection was already performed. Assets that are not in bold text do not have reviewable DVIRs. The Driver must select them and create a DVIR:
From the DVIR Menu screen, follow the DVIR procedure as described in Creating a Post-trip DVIR, below. Once all pre-trip DVIRs are submitted, the log in process is completed. RoadLog displays the Login Completion screen. Remove the Driver Key and tap OK. RoadLog displays the Driver Overview screen. Creating a Post-trip DVIR A post-trip inspection requires that you check Assets
(vehicle and current trailer(s)) and sub-assemblies at the end of a trip. If defects are noticed, they must be recorded manually in RoadLog. RoadLog automatically prompts the Driver to perform a post-trip inspection when:
A Driver logs out of the system Drivers change their status to either Personal Use or Sleeper Berth A Trailer is detached from the Vehicle The post-trip DVIR inspection begins at the Confirm DVIR Data screen:
Check the Vehicle location and odometer. Edit the location if required. Note: If the system is not receiving a clear GPS signal, you may have to enter your location manually. You can enter your location by tapping the Location field. When you tap the field, the Keyboard comes up. Type in the location and tap Go. Confrim DVIR Data Tap Next to continue. RoadLog displays the DVIR Menu screen that shows the assigned assets list (vehicle and current trailer(s)). If you are not detaching any trailers and want to skip the post-trip inspection, tap Skip. Note: If you are detaching any trailer(s), you must perform a DVIR. Tap Next to perform DVIR post-trip inspection. RoadLog displays the DVIR Menu screen. DVIR Assets 97 98 Tap each unchecked Asset, one at a time, to confirm its status or create a DVIR. Tap No Defects to create a DVIR with no defects for the selected Asset. Tap Add Defects to create a DVIR with defects for the selected Asset. Tap Edit Defects to edit existing DVIR defects previously recorded. Tap Skip to skip the post-trip inspection of the selected Asset. Tap Cancel to end the DVIR. Note: The DVIR Carry Over screen will appear if an Asset defect recorded in the previous post-trip inspection was not corrected during the most recent pre-trip inspection. Use the up and down arrows to scroll through the existing post-trip inspection reports, tap Next, and RoadLog will automatically add the previously recorded defects to the current report. RoadLog will then return to the DVIR Menu screen. Assigning Defects to a Part in the DVIR To create a new DVIR for the selected Asset from the DVIR Menu screen, tap Add Defects. RoadLog displays the DVIR Creation screen listing the predefined parts for this Asset. Use the up and down arrows to scroll through the parts list. Select the defective part from the list and tap Edit to assign defects to it. DVIR Carry Over Note: Part lists are created in the RoadLog Fleet Software, but you may add another part if it does not appear on your list. DVIR Creation Vehicle Inspection Reports: Creating DVIRs Vehicle Inspection Reports: Creating DVIRs To create a new part in the list, tap on the Other Part field. RoadLog displays the Keyboard screen. Enter the first letter(s) of the defective component and then tap List. A Parts List screen containing the predefined parts that match the typed characters will appear. If the part you wish to add does not appear in the stored list, enter the parts name in its entirety, and then tap Go. The DVIR Creation screen is displayed, highlighting the newly added part. New Part Added Once you have selected or added the defective part, tap Edit. RoadLog displays the DVIR Defect Details screen. Use the up and down arrows to scroll through the DVIR Defects Details list. Tap on and highlight the defect you want to assign to the selected part. Note: Defect lists are created in the RoadLog Fleet Software. You may select a defect from the list or add another defect if it does not appear on your list. To create a new defect in the list, tap on the Other Defect field. RoadLog displays the Keyboard screen. Enter the first letter(s) of the defect detail and then tap List. A Defects List screen containing the predefined defects for the part matching the typed characters will appear. If the defect you wish to add is not in the stored list, enter the full name of the defect, and then tap Go. The DVIR Defect Details screen, with the Other Defect field complete, is displayed. Tap Add to add the new defect to the list. Once you finish adding new defective part types to the list, tap Done. RoadLog displays the DVIR Menu screen. Complete your DVIR using the new defect listing(s) youve created. When all applicable defects for the part have been entered, tap Done. RoadLog displays the DVIR Creation screen. Defective parts are now in bold. Repeat these steps for any remaining defective parts. Perform post-trip inspections for the remaining assets. Once all assets are checked and entries completed, tap Next. DVIR Defect Details DVIR Creation RoadLog displays the DVIR Summary screen where you can review each DVIR item. If editing is needed, tap Back to return to the DVIR Menu screen. DVIR Summary To view items listed in the DVIR Summary screen, use the up and down arrows to scroll through the assets. DVIR Summary Submit DVIR Use the left and right arrows to scroll through the individual DVIR Summary for each asset. Tap Next to continue. RoadLog displays Submit DVIR screen. For each Asset, select the appropriate checkbox for Repaired, Repairs not necessary, Safe to operate, or Unsafe to operate. You can add notes by tapping in the Repair notes and Approval notes fields. When you tap the field, RoadLog displays the Keyboard screen. Type in notes and tap Go. Each time you complete a DVIR for an asset, tap Finish:
Note: If there are more assets to be reviewed, RoadLog automatically displays the DVIR Summary screen for the next asset. Printing a DVIR To print a DVIR, tap More from the DVIR Summary screen, then tap Print from the DVIR Summary (more) screen. Tap Report Defects from the DVIR Summary (More) screen to associate a Supporting Document with this DVIR. To submit each DVIR from the DVIR Summary screen, tap Next, then tap Finish from the Submit DVIR screen. RoadLog prints the DVIR, along with the Supporting Document for this activity. During printing, RoadLog displays the Printing in Progress screen. To cancel printing, tap Abort. Repair Notes/Approval Notes DVIR Summary (More) Printing in Progress 99 100 Vehicle Inspection Reports: Creating DVIRs Enabling/Disabling Exemptions Once the printing finishes, the DVIR Summary screen will appear. Tap Finish to complete the DVIR. Viewing Driver Vehicle Inspection Reports
(DVIR) Driver Overview RoadLog allows you to view the most recent Driver Vehicle Inspection Report for each of the assigned assets. From the Menu screen, tap DVIR overview. Or From the or Driver Overview screen tap View DVIR. RoadLog displays the DVIR Summary screen. To view, Print and Report Defects from the DVIR reports, follow the procedures from DVIR Summary and Printing a DVIR. DVIR Summary For the procedure on printing see Printing a DVIR. 11. Enabling/Disabling Exemptions According to the US HOS regulations, a Driver is permitted to take exemptions from HOS rules in the following circumstances:
Emergency conditions Adverse driving conditions 16-hour extension (This exception is applicable only for property-carrying vehicles) 100 mile radius for CDL drivers 150 mile radius for non-CDL drivers Personal Use Exemptions are stopped and started by the Driver and may also be automatically deactivated by RoadLog under specific conditions. To enter an exemption in RoadLog, tap Driver Options from the Driver Overview Options screen. RoadLog displays the Driver Options screen. Tap Take Exemption. RoadLog displays the Exemptions screen. Select the exemption you wish to take from the radio button list. To add a remark related to the selected exemption, tap on the remarks field. RoadLog displays the Keyboard screen. Driver Overview Driver Options Enter the remark and tap Go. RoadLog displays the Exemption screen with the typed remark. Exemptions Press Start to activate the exemption. RoadLog returns to the Driver Options screen. If you wish to stop a current exemption, tap Stop. Automatic deactivation of Exemptions RoadLog will automatically deactivate the exemptions in the following instances:
The Emergency exemption will end when the Driver changes duty status to Off Duty or Sleeper Berth. 101 102 Enabling/Disabling Exemptions Adding a Pre-Trip or Post-Trip Activity The Adverse driving condition exemption will end when the Driver fulfills the HOS daily reset condition. The 100 and 150 air-miles radius exemptions will end when the vehicle exceeds the prescribed radius, when the Driver logs out, or when the Driver changes duty status to Personal Use. The 16-hour extension exemption will end when the Driver fulfills the HOS daily reset condition. Note: The 16-hour exemption is designed for one-day duty tours. The duty tour is the interval between the time a Driver comes On Duty and is released from duty on a daily basis. This period begins and ends at the Drivers normal work reporting location and may only be used following 10 or more consecutive hours off-duty, 10 or more consecutive hours in the sleeper berth, or a combination of 10 or more consecutive hours Off Duty and Sleeper Berth time. Disabling the 100 or 150 Air-miles Radius Exemptions The 100 or 150 air-miles radius exemptions can only be disabled automatically by RoadLog in the following circumstances:
The 100 or 150 air-miles radius is exceeded by the vehicles distance traveled. The Driver logs out. The Driver changes status to Personal Use. 12. Adding a Pre-Trip or Post-Trip Activity The Driver has the option of extending the On Duty time frame at the beginning of the current log in session by adding a pre-trip activity or at the end of the trip by adding a post-trip activity function. To add a pre-trip or post-trip activity from the Driver Overview Options screen, tap Driver Options. RoadLog displays the Driver Options screen. Depending on your choice, tap Pre-Trip Activity or Post-Trip Activity. RoadLog displays the appropriate screen. Driver Overview Driver Options Tap on the arrows for each field to select the Start Date and Start time Hour and Minutes for the Activity using the drop-
down menus. Select AM or PM using the radio buttons. Note: If the entered start time or end time overlaps with a preceding log in session, RoadLog displays the Invalid Date/Time screen. Tap OK. The Pre-Trip or Post-Trip Activity screen will be displayed again. Enter a valid start time and tap OK. RoadLog displays the Confirm Pre-Trip or Confirm Post-Trip Activity screen. Tap Yes to confirm the pre-trip or post-trip activity. RoadLog displays the Driver Options screen. Post-Trip Activity Pre-Trip Activity Confirm Post-Trip Activity Confirm Pre-Trip Activity 103 104 Performing a Roadside Inspection Performing a Roadside Inspection 13. Performing a Roadside Inspection RoadLog features a roadside inspection function that allows authorized inspection personnel to retrieve the recorded logbooks of the logged in Drivers last 7 or 8 days schedule in print or electronic format. Retrieving and Printing DVIR Reports To retrieve logbook records from the Driver Overview Options screen, tap Roadside Inspection. RoadLog displays the Roadside Inspection screen. Tap DVIR to display the DVIR Roadside Inspection screen. Tap Print. RoadLog prints the last recorded DVIR report for each of the current assets while displaying the Printing in Progress screen. Note: For an explanation of the print out, see DVIR Report printout. Driver Overview Roadside Inspection DVIR Roadside Inspection Retrieving, Printing and Transferring HOS logs To perform an inspection of the HOS Logs from the Roadside Inspection screen, tap HOS Logs. RoadLog displays the HOS Logs Roadside Inspection screen. Using the radio buttons, select the name of the Driver that youll perform a roadside inspection for. Tap USB Transfer to transfer the HOS Log file to a USB flash drive. RoadLog displays the Insert USB Flash Drive screen. Insert a USB flash drive into the USB port to perform the RODS data transfer. After the transfer is complete, RoadLog displays the Data Download Completed screen. Note: To enable data transfer, the USB must be formatted in the FAT32 file system. Tap OK, and remove the USB key from the slot. Note: The file that is transferred in the Roadside Inspection is the RODS data (Record Of Duty Status) text data file. No other data is transferred. To print the chosen Drivers daily Log from the HOS Logs Roadside Inspection screen, Tap Print. RoadLog prints the logs for the last 7 or 8 days (based on the Drivers schedule), while displaying the Printing in Progress screen. Roadside Inspection HOS Logs Roadside Inspection Insert USB Flash Drive HOS Logs Roadside Inspection Printing in progress 105 106 Company Log Out from RoadLog Software Updates 14. Company Log Out from RoadLog When a company isnt using a RoadLog, the company should log out. RoadLog data recorded while the company was logged in is not available to other companies that log in afterwards. Note: Before going on to company log out, all logged-
in Drivers must log out from RoadLog, in order to save their RODS data to their Driver Keys. After a company logs out from a RoadLog device, its Drivers can no longer save their RODS data from RoadLog to their Driver Keys. To log out the company, insert the companys Fleet Key. RoadLog displays the Fleet Key Options screen. Tap Logout. RoadLog displays the Company Logout Options screen. Tap Logout with Data Download to save company data from RoadLog to the Fleet Key (If RoadLog detects the Fleet Key is full and unable to store additional data, you may only select Logout without Data Download). RoadLog displays the Fleet Key Files Download screen. Use the up and down arrows to view the Fleet Key Files Download file choices. It is recommended that you download all files. Select the files to be downloaded and tap Download. RoadLog displays the Transfer in Progress screen during data transfer and the Data Download Completed screen when data transfer is complete. Remove the Fleet Key. RoadLog displays the Successful Logout screen. Tap OK. RoadLog displays the Settings screen. Notes: If you try to log out the company while a Driver is still logged in, RoadLog displays the Driver Logged In screen. Fleet Key Options Company Logout Options Fleet Key Files Download Transfer in Progress 15. Software Updates You can update RoadLogs software by transferring an update package from a Driver or Fleet key. See details on how to transfer the update package onto a Driver or Fleet Key in the RoadLog Fleet Software manual: Transferring an Update to RoadLog. To perform a RoadLog software update, insert a Driver Key or Fleet Key that contains the software update package into the USB port. RoadLog displays the SW Update screen. Tap Install to start the updating process. Once the installation is complete, RoadLog will automatically reboot and display the start up screen. After RoadLog completes the reboot, the software update becomes effective. Note: If a data transfer error is detected, RoadLog will display the SW Update Error screen. In this case, tap OK. If the inserted flash drive is the Driver Key, RoadLog will display the Driver Key Options screen. If the inserted flash drive is the Fleet Key, RoadLog will display the Select Key Role screen. Tap the Home icon or remove the inserted Key to go to the Driver Overview screen. Software Update Software Update Error Select Key Role 107 108 Diagnostic Warning Screens Diagnostic Warning Screens 16. Diagnostic Warning Screens RoadLog runs automatic diagnostic checks to detect and report failures that affect its performance. When failures are detected, RoadLog displays relevant warning screens. The warnings RoadLog may issue regarding Driver compliance and device operations are described in the chart below. Steps you can take to resolve the problems detected are also provided. Screen Meaning Action required The Driving Time limit has been exceeded. Take the required rest time. Check the Driver Overview screen for the rest time available to you before Driving again. Screen Meaning Action required Although the Driver has exceeded the Driving Time limit, the vehicle is still in motion. Stop the vehicle as soon as possible and take the required rest time. The daily On Duty time rule has been broken. Take the required rest time before coming back on duty. Check the Driver Overview screen for the remaining rest time available to you. The weekly On Duty time rule has been broken. Take the required rest time before coming back on duty. The week refers to the preceding seven or eight days, depending on the schedule assigned for the Driver. Check the Driver Overview screen for the remaining rest time available to you. RoadLog detects a daily On Duty time violation for this Driver while the vehicle is in motion, or RoadLog detects a weekly On Duty time violation for this Driver while the vehicle is in motion. Stop the vehicle as soon as possible and take the required rest time. 109 110 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required The Driver has crossed the border of the 100 air-miles radius zone. Stop the vehicle as soon as possible and take the required rest time. The 100 air-miles exemption is no longer active The Driver has crossed the border of the 150 air-miles radius zone. Stop the vehicle as soon as possible and take the required rest time. The 150 air-miles exemption is no longer active The vehicle is in motion although none of the logged in the Drivers has changed their status to Driver, or the vehicle is in motion and no Drivers are logged into the system. Stop the vehicle and log in to RoadLog, or stop the vehicle and switch status to Driver. Stop the vehicle and perform the pre-trip inspection on the resource(s) in question. RoadLog detects that a pre-trip inspection was not performed on one or more current resources, but the vehicle is in motion, or a pre-trip inspection was performed for all resources, but at least one of those resources indicates that vehicle operation is not safe. The Self-Test Failed screen is displayed. Press the on/off button to restart the device. If the problem persists, contact Customer Assistance for support. VDO Technical Support:
Tel: 855-ROADLOG or 855-762-3564 E-mail: roadlog-support@vdo.com Remove the USB device. Press the on/off button to restart the device. If the problem persists, contact Technical Support for assistance. VDO Technical Support:
Tel: 855-ROADLOG or 855-762-3564 E-mail: roadlog-support@vdo.com The inserted USB device is defective and has caused the RoadLog USB port to short circuit. RoadLog cannot communicate with the vehicle, and therefore HOS calculations cannot be performed. Until the problem can be resolved, use paper logs to track Duty Status changes and activities. The internal battery has a low energy level. Replace the battery. See Battery Installation. 111 112 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required The vehicle started to move and RoadLog detects a USB device connected. Remove the USB device. CAUTION! Driving with a USB device in the USB port can cause damage to RoadLog and
/ or the USB device. Printer paper has run out. RoadLog has detected a USB device connected while a printing request was performed. Remove the USB device and try printing again. The printer overheated. During the printing process, a printer error was detected. Try to print again. If the problem persists, contact Customer Support for assistance. VDO Technical Support:
Tel: 855-ROADLOG or 855-762-3564 E-mail: roadlog-support@vdo.com During Driver log out, RoadLog detects that there is not enough available memory on the Driver Key to download data. Insert a new paper roll and then tap Continue to resume printing. Tap Cancel to abort printing CAUTION! Do not touch printer head while replacing paper. It may be very hot!
Wait for printer to cool down. The printing resumes automatically once the temperature is in the normal range. Tap Cancel if you want to abort the current printing. Tap Continue to log out manually. The Driver RODS data will be stored on RoadLog. Tap Cancel to abort the log out. Download data to the Fleet Software as soon as possible to create more available memory on the Driver Key. 113 114 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required A transfer error has been detected during data download to the Driver Key. Tap Continue to log out manually. The Driver RODS data will be stored in RoadLog. Tap Cancel to abort the log out. RoadLog detected data conflicts between RODS data on Driver Key and the RODS data in RoadLog device. Tap Continue to continue log in. OR Tap Cancel to abort log in. Due to this conflict, merging the two sets of RODS data is not possible. OR As a result, RoadLog may not have enough data to calculate your HOS availability. Fix the conflicting RODS data using the RoadLog Fleet Software. Conflicting RODS data has been downloaded to the Driver Key. Fix the conflicting RODS data using the RoadLog Fleet Software. The maximum number of Drivers (five) are already logged into this RoadLog device. Select a Driver from the list and tap Force Logout to log that Driver out. Tap Cancel if you dont want to continue logging in. There is another Driver logged into RoadLog under Personal Use status. Tap Cancel if you want to cancel your log in. Select Force Logout to log out the Driver logged in under Personal Use status and continue your log in. GPS signal is unavailable. The automatic localization feature does not work. Enter your location state and place manually. 115 116 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required Tap Continue Login to continue logging in. The RoadLog calculations may be incorrect due to the missing RODS data. Go to the listed vehicles and recover your RODS data by inserting your Driver Key and tap Recover RODS. Tap Cancel to abort the log in. You may cancel log in and then use the RoadLog Fleet Software to reconstruct the missing parts of your RODS history on the Driver Key. You may continue the log in but RoadLog will not be able to accurately warn you when you are about to break HOS regulations. You performed an improper log out from the listed Vehicles. The RODS data found on Driver Key might be incomplete due to the improper log out. There is insufficient historical data for RODS availability calculation. If you get this message while logging in with a Driver Key, it means the RODS data found on your Key merged with the RODS data found in RoadLog, and RoadLog does not have the complete duty status history for the last 15 days. If you get this message while logging in manually, it means that your RODS data found on this RoadLog does not have the complete duty status history for the last 15 days. Vehicle is in motion and you are approaching the limit of the 150 air-miles radius zone. If you go beyond this limit, the 150 air-miles exemption will automatically be disabled The entered date and time for a pre-trip or post-trip activity is invalid, meaning it overlaps with an already recorded log session. Tap OK and then type in a valid date for the activity you want to add. To view the available time frames for extending your on duty time, check your logs. See View Logs (Details). The inserted USB device is not a valid Driver Key. Tap OK to continue. Even thought the USB is not a valid Driver Key it can still be used for performing roadside inspections or for downloading the device related files. The inserted USB device is not a valid Fleet Key. Remove the USB device and insert a valid Fleet Key. Configuration cannot continue without having a valid Fleet key inserted in RoadLog. The tractor list may not contain the tractor created with the serial number of the RoadLog unit in this vehicle None of the downloadable files were selected and the Download button was tapped. Select at least one file from the list before continuing to download. 117 118 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required Data download onto the USB key failed. Retry data download. The inserted USB device is not recognized by RoadLog. Remove the USB device and insert a valid RoadLog USB Driver or Fleet Key. The USB key memory is full. Free up some memory from the USB key by downloading to the Fleet Software, and then retry the current function. An invalid Fleet Key was inserted into the RoadLog connector. Remove the USB key and insert a valid Fleet Key to continue. The entered Driver Identification is not found in RoadLog memory. You are not able to log in to this RoadLog. Acknowledge the message and log in with valid Driver ID. Driver IDs are established in the Fleet Software. During system startup, RoadLog detects that the current vehicle position is not the same position recorded when the device was switched off. Acknowledge the message. A record of the location conflict is stored in the RoadLog data. 119 120 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required Driver Key memory is full. No data download can be performed on this Key. Free up some memory from the USB key by downloading to the Fleet Software, and retry download. A data transfer error occurred while performing the download to Driver Key. Remove the Driver Key, and then reinsert Driver Key and retry download. Driver Key memory is full. The available recorded RODS cannot be downloaded on the Driver Key. Data transfer error occurred while transferring the Driver RODS file on the Driver Key. Tap Continue to continue to perform a manual log out. Your RODS history will be stored in RoadLog. Tap Cancel to abort the log out. Free up some memory from the USB key by downloading to the Fleet Software, and then try to log out again. Tap Continue to log out manually. Your RODS history will be stored in RoadLog (if there is sufficient internal memory available). Tap Cancel to abort the log out. Try to log out again. During a software update, an error was detected. Acknowledge the message. Try to install again. See Software Updates. The user attempts to perform an automatic configuration, but the Company Trailer List file is either damaged or cannot be found on the Fleet Key. Automatic configuration cannot be performed. Acknowledge the message. Then, use the RoadLog Fleet Software to create or fix the Company Tractor List File on the Fleet Key. When complete, re-
attempt automatic configuration. 121 122 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required RoadLog detects no speed pulses; therefore it cannot calculate the W factor. Acknowledge the message. The connection between RoadLog and the Vehicle will need to be checked. RoadLog does not detect the relevant messages for the chosen synchronization interface. Check which synchronization interface RoadLog is physically connected to in the Vehicle and then try to re-synchronize. The wrong interface may have been selected. Try changing the synchronization type between J1708 and J1939 or vice versa The calculated value of the W factor is beyond the valid range. Re-enter the measurement with a valid value. W Factor value must have a value of between 2,400 and 25,000 pulses per kilometer. In 30 minutes, the On Duty time rule will be broken. Stop the vehicle in 30 minutes or less and take the required rest time. In 30 minutes, the On Duty time rule for this week will be broken. Stop the vehicle in 30 minutes or less and take the required rest time. In 15 minutes the On Duty time rule for this day will be broken. Stop the vehicle in 15 minutes or less and take the required rest time. 123 124 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required In 15 minutes the On Duty time rule for this week will be broken. Stop the vehicle in 15 minutes or less and take the required rest time. The Driver list from Company Support Data File contained on the Fleet Key has two or more identical sets of Driver data. Use the RoadLog Fleet Software to remove the duplicate Driver from Company Support Data File. In this case, the Driver list cannot be uploaded into RoadLog. Manual Driver log in for this RoadLog is not possible unless the Driver who wants to log in manually was previously logged in to this RoadLog unit using his or her Driver Key. Company Support Data File is not found on the Fleet Key. Use the RoadLog Fleet software to create the missing file on the Fleet Key. RoadLog has no more memory available to record the vehicle activities, data and DVIR data. Download Company Vehicle Activities Data File and Company Vehicle DVIR Data File as soon as possible to avoid overwriting recorded activities. Company Vehicle Activities Data File or Company Vehicle DVIR Data File was not downloaded for more than 28 days. Download Company Vehicle Activities Data File and Company Vehicle DVIR Data File in the next 48 hours to avoid overwriting recorded activities. Company Vehicle Activities Data File or Vehicle DVIR Data File has not been downloaded in 29 days In 24 hours, existing vehicle activities data will be overwritten if no download is performed. Download Company Vehicle Activities Data File and Company Vehicle DVIR Data File in the next 24 hours to avoid overwriting recorded activities. 125 126 Diagnostic Warning Screens Diagnostic Warning Screens Screen Meaning Action required Screen Meaning Action required The maximum number of configuration sessions (100) were recorded in RoadLog memory. Download Company Configuration Session File in order to perform the next configuration. There is no more memory available in RoadLogs internal memory to record this Drivers activities. Download Driver RODS binary data file as soon as possible. It is safe to remove the inserted USB device. Acknowledge the message. Remove the USB drive from the USB port. The inserted Key contains a Software update package. Tap Install to update RoadLog Software. See Software Updates. Tap Cancel if you dont want to perform the software update. RoadLog detects there is no USB flash drive inserted in the USB connector. Insert a USB flash drive into the connector. Data transfer is in progress. CAUTION! Do not remove the inserted USB flash drive until you are prompted to do so. Removal of the USB flash drive during data transfer might result in data loss. 127 128 RoadLog Files RoadLog Files 17. RoadLog Files Data exchange between RoadLog and the Fleet Software is achieved through transfers using the Fleet Key, Driver Key or USB flash drive. Data exchanges involve uploading and downloading several different types of files, each type of file having its own purpose. There are three types of files:
Files related to the Company Files related to Driver use Files related to the RoadLog device Company-Related Files (Fleet Management Software Files) Company Files are files that are either used by RoadLog during company log in sessions or that contain data recorded by RoadLog during company log in. COMPANY IDENTIFICATION FILE The Company Identification File contains the company configuration data. The file is created during company registration and first set up. The file is uploaded in RoadLog memory during company log in. The file can be downloaded only on Fleet Keys belonging to the logged in company The Company Identification File contains:
Company identification. Company address. Time zone of the companys home terminal. The Company Identification File name structure is:
When created by the RoadLog: Carrier_ CompanyID. List of the Driver/Users permitted to log in manually. CID When created by RoadLogFleet: Carrier_CompanyID_ latest DVIR report. List of predefined company trailers along with their yymmddhhmmss.CID CompanyID: the USDOT number. yymmddhhmmss: the time the file is created. COMPANY TRACTOR LIST FILE List of predefined company annotations. List of predefined Supporting Documents activities. List of company Shipment Documents. The Company Support Data File name structure is:
The Company Tractor List File contains the list of RoadLog devices (up to 100) installed on the fleets vehicles. The file is created by the RoadLog Fleet Software during company registration and first set up. The file can be updated by the RoadLog with the latest configuration upon the users request. When created by the RoadLog: Carrier_CompanyID_ SupportData.CSD When created by RoadLogFleet: Carrier_CompanyID_ SupportData _ yymmddhhmmss.CSD The Company Tractor List File includes:
CompanyID: the USDOT number. Company identification. yymmddhhmmss : time the file is created. A list of the companys tractors. COMPANY VEHICLE ACTIVITIES DATA FILE Configuration parameters for each of the tractors. The last DVIR record for each of the tractors. The Company Tractor List File name structure is:
The Company Vehicle Activities Data File contains data recorded by RoadLog during company log sessions. The file is downloaded automatically onto the Driver Key upon Driver log out. The file is created by RoadLog whenever a user requests its download onto a Driver Key or Fleet Key When created by RoadLog: Carrier_ CompanyID_ Company Vehicle Activities Data File includes:
TractorList.CTL When created by the RoadLog Fleet Software: Carrier_ CompanyID_TractorList_ yymmddhhmmss.CTL CompanyID: the USDOT number. Vehicle reports recorded over the previous 30 days. The Company Vehicle Activities Data File name structure is:
Only created by the RoadLog: Carrier_CompanyID_ yymmddhhmmss is the time when the file is created. TractorNumber_yymmddhhmmss.CVD COMPANY SUPPORT DATA FILE CompanyID: the USDOT number. The Company Support Data File contains data used by RoadLog during company log in. The file is created by the RoadLog Fleet Software during company registration and first set up. The file is uploaded in RoadLog memory during company log in. The file is updated by RoadLog whenever a user requests its download. The file can be downloaded only on the Fleet Key belonging to the logged in company. The Company Support Data File includes:
Yymmddhhmmss: time the file is created. COMPANY VEHICLE DVIR DATA FILE The Company Vehicle DVIR Data file contains DVIR data reports recorded by RoadLog during company log sessions for the last 30 days. The file is created by RoadLog whenever a user requests its download on a Driver Key or Fleet Key belonging to the logged in company. 129 130 RoadLog Files RoadLog Files The Company Vehicle DVIR Data file includes:
yymmddhhmmss is the time when the file is created. Serial Number is the device serial number. The Vehicle Data file includes:
DVIR reports recorded no more than 30 days from the COMPANY ASSETS PARTS LIST FILE yymmddhhmmss is the time when the file is created. Vehicle travelling periods. last download. The Company Vehicle DVIR Data file name structure is:
Only created by the RoadLog: Carrier_CompanyID_ TractorNumber_yymmddhhmmss.CVD CompanyID: the USDOT number. The Company Assets Parts List file contains the list of predefined asset types used during RoadLog DVIR inspection. It is uploaded to RoadLog memory during company log in. The file is created by RoadLogFleet during activation of the Fleet Key. The file is downloaded, when requested by the user, only onto Fleet Keys belonging to the logged in company. yymmddhhmmss: time the file is created. The Company Assets Parts List file includes:
DEVICE DIAGNOSTIC EVENTS DATA Records of system time synchronization with GPS time. The Device Diagnostic Events Data file contains the RoadLog diagnostic events that were recorded in the last 30 days, irrespective of whether the events occurred during a company log session or not. The Device Diagnostic Events Data file includes:
Diagnostic events recorded by RoadLog in the last 30 The Device Diagnostic Events Data file name structure is:
Only created by RoadLog: EOBR_SerialNumber_ VehicleData_yymmddhhmmss.EVD Serial Number is the device serial number. COMPANY CONFIGURATION SESSION FILE A predefined list of vehicle parts, along with the related days. yymmddhhmmss is the time when the file is created. The Device Diagnostic Events Data file name structure is:
Only created by RoadLog: EOBR_SerialNumber_ DiagnosticData_yymmddhhmmss.EDD Serial Number is the device serial number. yymmddhhmmss is the time when the file is created. VEHICLE DATA The Vehicle Data file contains data recorded by RoadLog over the previous 30 days, during periods of time that companies were not logged into the system. The Company Configuration Session file contains configuration session data recorded by RoadLog during company log sessions. The file is created by RoadLog whenever a user requests its download on a Driver Key or Fleet Key belonging to the logged in company. The Company Configuration Session File includes:
The last 100 calibration sessions records. The Company Configuration Session File name structure is:
Only created by RoadLog: Carrier_CompanyID_ possible defects for each part. A predefined list of trailer parts, along with the related possible defects for each part. Optional: The predefined list of other asset types, along with related defects. Other assets refers to any other asset (except trailers) that might be attached to the vehicle. The Company Assets Parts List file name structure is:
When created by RoadLog: Carrier_ CompanyID_ DVIRPartsList.DPL TractorNumber_CalibrationData_yymmddhhmmss.CVD When created by RoadLogFleet: Carrier_CompanyID_ CompanyID: the USDOT number. DVIRPartsList_yymmddhhmmss.DPL CompanyID: the USDOT number. TractorNumber is the number on which the RoadLog device is installed. yymmddhhmmss: time the file is created. Device Related Files Device-related files contain data recorded by RoadLog, or data related to the vehicle. These files are not recorded during company log in sessions. At the users request, the files can be downloaded onto a Fleet Key, Driver Key or any USB flash drive formatted in FAT32, irrespective of a companys log in status. DEVICE CONFIGURATION PARAMETERS DATA The Device Configuration Parameters Data file contains RoadLogs original set up configuration. The Device Configuration Parameters Data file includes:
Configuration Parameters based on default values. The Device Configuration Parameters Data file name structure is:
Only created by RoadLog. EOBR_SerialNumber_Configuration Parameters_ yymmddhhmmss.CLB 131 132 RoadLog Files RoadLog Files DEVICE SOFTWARE UPDATE HISTORY FILE The Device Software Update History file contains the list of software packages installed on a specific RoadLog. The Device Software Update History file contains:
Installed software packages in this RoadLog. Device Software Update History file name structure is:
Only created by RoadLog: EOBR_SerialNumber_ SWUpdates_yymmddhhmmss.EVD Serial Number is the RoadLog serial number. The Driver Support Data File contains:
Logged in co-drivers during Driver log in session. Predefined list of trailers assigned to the Driver by the Assigned trailers during Driver log in session. RoadLog Fleet Software, along with each trailers related DVIR record. Up to 20 DVIR records can be stored in the file. This data is available to the Driver during pre-trip or post-trip trailer inspection. Assigned shipment documents during Driver log in session. Supporting documents events generated during Driver yymmddhhmmss is the time when the file is created. List of Shipment Documents assigned to the Driver. Up log in session. Driver Related Files to 20 Shipment Documents can be stored in the file. This data is available to the Driver during Shipment Documents management (whenever a Shipment Document is added or removed). Exemptions taken by the Driver. Adjustments of system time with the GPS time records. Driver-related files contain the following:
When created by RoadLog: Driver_DriverID_ The Driver Support Data File name structure is:
Time frame for the reviewed RODS. yymmddhhmmss.DID Data recorded by RoadLog during Driver log in sessions. When created by RoadLogFleet: Driver_DriverID.DID SupportData_yymmddhhmmss.DSD When created by RoadLog: Driver_DriverID_ The Driver RODS Binary Data file name structure is:
Created only by RoadLog: RODS_CompanyID_ Driver identification data. DriverID is the Driver identification number as it was When created by RoadLogFleet: Driver_DriverID_ DriverID_yymmddhhmmss.RDS assigned by the company. SupportData.DSD Driver support data . DRIVER IDENTIFICATION DATA FILE The Driver Identification Data file includes the Drivers identification data as supplied by the Drivers employer. The file is created by the RoadLog Fleet Software and downloaded to the Driver Key. At the users request, RoadLog downloads this data to the Driver Key or Fleet Key. The Driver Identification Data file contains:
Drivers first and last name. Drivers schedule (7 days or 8 days). Drivers starting time. Time zone at the drivers home terminal. Coordinates (latitude and longitude) of the vehicle location at the work-reporting location. Indication of whether or not the driver has been assigned a 100 or 150 air-miles radius exemption according to FMCSA regulations. Indication of whether or not the Driver is allowed to use the 34-hour restart provision as defined by FMCSA. The Driver Identification Data file name structure is:
yymmddhhmmss is the time when the file is created. DriverID is the Driver identification number as it was by FMCSA (USDOT number). CompanyID is the company identification as assigned DRIVER SUPPORT DATA FILE The Driver Support Data file contains predefined data for use by the Driver user during log in sessions. The file is uploaded to RoadLog memory during Driver log in. The file is created by the RoadLog Fleet Software and downloaded to the Driver Key. assigned by the company. yymmddhhmmss is the time when the file is created. assigned by the company DriverID is the driver identification number as it was DRIVER RODS BINARY DATA FILE yymmddhhmmss is the time when the file is created. The Driver RODS Binary Data file includes Driver duty status records for the current and the previous 15 calendar days. DRIVER RODS TEXT DATA FILE The file is uploaded to RoadLog memory during the Drivers log in session. The Driver RODS Text Data file includes Driver duty status records for the current and the previous 7 or 8 calendar days in FMCSA required format. The file is created by RoadLog at the users request, and downloaded automatically onto the Driver Key during Driver log out. The file is created by RoadLog at the users request, and downloaded automatically onto the inserted flash drive during roadside inspection. The file can be downloaded only onto a Driver Key or Fleet Key belonging to the logged-in company. The file can be downloaded onto a Driver Key, Fleet Key or any USB flash drive in the FAT32 format. The Driver RODS Binary Data file contains:
The Driver RODS Text Data file contains:
Driver log in sessions. Change of duty status events. Change of duty status records. Diagnostic events. Positioning data(GPS) recorded during Driver log in Positioning data (GPS) recorded during Driver log in session. sessions. Diagnostic events recorded by RoadLog during Driver log in session. 133 134 RoadLog Files The Driver RODS Text Data file name structure is:
DriverID is the Driver identification number as it was Created only by RoadLog: RODS_CompanyID_ DriverID_yymmddhhmmss.TXT CompanyID is the company identification as assigned by FMCSA (USDOT number). assigned by the company yymmddhhmmss is the time when the file is created. Note: This file is a text file in the CSV (Comma Separated Values) format. Therefore, it can be viewed with any text file editors. Printouts RoadLog provides the following types of printouts:
Daily Log DVIR Report Supporting Document Diagnostic Events Configuration Parameters 135 RoadLog Files Daily Log VDO Logo Title of the printout Time and date of printing 1. 2. 3. 4. Date log was recorded 5. Drivers home terminal time offset. 6. 7. 8. The name of the Driver whose log is printed. Start time of the 24-hour period. Total miles Driver travelled on the date the log was recorded per day. 9. Name and address of the primary company. 10. Carriers worked for: Companies for which the Driver worked on the day the log is or was printed, as well as:
USDOT number Login time: Time the Driver started working for this company. Logout time: Time the Driver finished working for this company. Schedule: Type of schedule assigned to the Driver by the company (7 or 8 days). 34-hours restart function: Indication of whether the 34-
hour restart function is enabled or disabled. Vehicle type: Type of vehicle assigned to the Driver
(Passenger or Property-carrying). 11. Vehicles driven:
List of vehicles driven, along with ID numbers for attached trailers during the period covered by the printed log. 12. Co-Drivers: First and last names of Co-Drivers. 13. Shipment documents: List of shipment documents assigned to the vehicle during the period covered by the printed log. 14. Date of the printed log 15. Graphical representation of duty status changes Format graph of the time spent by the driver in each duty status:
OFF (off duty status). SB (time spent in sleeper berth). ON DUTY (on duty time). DRIVING (driving time). 16. 17. Total hours: Total hours the Driver has spent in each duty status. Change of duty status list: List all the duty status change events, along with the location of the duty status change. Note: If the change of duty status was not recorded by the RoadLog device, but created/edited with the RoadLog Fleet Software, it will be marked as Edited. No vehicle data periods (NO_ECM): Periods of time that vehicle data was not received by RoadLog. The start time for each of these periods is also listed. No GPS signal periods: Periods of time during which RoadLog did not detect a GPS signal. The start and end times for each of these periods are also listed. 18. 19. 136 20. Exemptions: All the exemptions taken by the Driver on the day the log was completed. Possible exemptions are:
Emergency. Adverse driving. 16-hour extension. 100 mile radius driver. 150 mile radius driver. Personal Use The start and end times for each exemption taken are also printed. 21. Signature: Field for Drivers signature. RoadLog Files DVIR Report VDO Logo. Title of printout. 1. 2. 3. Date and time of printing. 4. Drivers home terminal time zone. 5. Vehicle registration plate number. Type of asset for which DVIR inspection has been performed. 6. Asset identification number. 7. Post-trip inspection 8. Date/Time Date and time the post-trip inspection was performed. Driver ID Driver name Location Odometer Part:
Signature 9. Repair Date/Time Certifier ID Certifier Name Repair certification Identification of the Driver who performed the post-trip inspection. Name of the Driver who performed the post-trip inspection. Name of the location the post-trip inspection was performed. Vehicle odometer reading at the time of post-trip inspection. List of defective part(s) and defect details recorded during the post-trip inspection. Safety-critical details are made explicit. The signature field for the Driver who performed the inspection. Date and time the repair certification is recorded in RoadLog. Identification of the Driver who certified the repairs. Name of the person who certified the repair. Indication of whether or not the defects recorded during the post-trip inspection were repaired. Safety certification Indication of whether or not the vehicle is safe to operate. Repair notes List of repair notes, if any. Signature Signature field for the person who certified the repairs. 10. Pre-trip inspection Date/Time Certifier ID Certifier name Safety certification Safety notes Signature 137 Date and time the pre-trip inspection is registered in RoadLog. Identification of the Driver who performed the pre-trip inspection. Name of the Driver who performed the pre-trip inspection. Indication of whether or not the defects recorded during post-trip inspection were repaired. Indication of whether or not the vehicle is safe to operate Signature field for the Driver who performed the pre-trip inspection. RoadLog Files Supporting Document Company Log Out from RoadLog No. Explanation 1 2 3 4 5 6 7 8 VDO Logo. Time of printing. Vehicles license plate registration number. Number of the supporting document generated for the given activity. Activity for which the supporting document was generated. Time the supporting document was generated. Nearest populated area at the time the supporting document was added. Coordinates of the location at which the supporting document was generated. Diagnostic Events No. Explanation 1 2 3 4 5 6 VDO Logo. Title of printout. Time and date of printing. Vehicles license plate registration number. The most recent 100 diagnostic events recorded by RoadLog during the previous 30 days, along with the time of each occurrence and its event code. See Diagnostic Events list for a complete list of diagnostic events and their respective causes. Signature field for the user who prints the Diagnostic Events. Configuration Parameters No. Explanation 1 2 3 4 5 6 7 VDO Logo. Title of printout. Printing date and time. Date and time the most recent configuration was performed. Name of the person who performed the configuration. List of calibration parameters and their value. Signature field for the Driver who performed the configuration. Diagnostic events list Event Code Occurrence / Condition PWR_ON PWROFF TESTOK SERVIC RoadLog is powered up and the booting sequence is completed. RoadLog is powered off. Self-test result is OK. Self-test failed. MEMERR Self-test failed. 138 RoadLog Files RoadLog Files Event Code Occurrence / Condition Event Code Occurrence / Condition LOWVLT BATLOW CLKERR CLKADJ HIGHVT IGN_ON IGNOFF SWC_ON SWCOFF RESTRT BAT_OK ENG_ON ENG_OFF FCT_ON FCTOFF UPD_OK UPDNOK INTFUL Low voltage detected. Battery energy level is low. A deviation of greater than 60 seconds between RoadLog time and the time received from the GPS has been detected. RoadLog has adjusted its system time to GPS time. High voltage detected. Ignition signal is ON. Ignition is OFF. RoadLog has woken up from sleep mode. RoadLog has entered sleep mode. RoadLog is reset (the ON/OFF button has been pressed for 5 or more consecutive seconds). Battery condition OK. Vehicle engine is ON. Vehicle engine is OFF. RoadLog is fully functional. RoadLog is not fully functional. RoadLog software update completed successfully. RoadLog software update failed. RoadLog has recorded company Vehicle data and DVIR data for the past 29 days, but no data downloads have been performed. OR RoadLog has data for the previous 99 configuration sessions, but no data downloads have been performed. OR RoadLog has recorded RODS data for at least one logged in Driver for the past 14 days, but no data downloads have been performed. DATACC At Driver log in, RoadLog has used RODS data from the Driver Key to create the current Drivers RODS in its memory. EXTFUL The USB key memory is full. Data download cannot occur. EXTERR Communication error with the USB device. DLOADY DLOADN FATERR CLSERR USPERR USP_OK NODRID PINERR DRIDRD DRIDNO DPYERR KEYERR DPY_OK KEY_OK DPYTMP PRTERR PRT_OK PRTTMP PAPERR PRTDLY PRTCNL NOLTLN NOTSYC NO_ECM ECM_ID ECM_OK FCTERR RoadLog has successfully downloaded data onto the USB key. The inserted USB key is not authenticated as a valid Fleet Key or Driver Key. The inserted USB key is not formatted according FAT32 file system. The inserted USB device is not recognized by RoadLog. USB power supply error. USB power supply is OK. No Drivers have logged into RoadLog, but the vehicle is in motion. During manual log in, the Driver identification entered is not recognized by RoadLog. Driver log in with Driver Key successful. Driver log in with Driver Key failed. Display error. Touch panel error. The existing display error has been corrected. The existing key error has been corrected. The display temperature is out of working range. Printer error. Existing printer error corrected. The printer temperature is out of working range. Printer has run out of paper. Print job has been stopped by RoadLog. Print job has been canceled by RoadLog. RoadLog cannot obtain valid positioning data. RoadLog cannot synchronize its time with GPS time due to a poor or absent GPS signal. One of the diagnostic events listed below has been detected, indicating that the distance travelled according to GPS data conflicts with the distance travelled according to vehicle data. CDSTER CSPDER JDSTER JSPDER An ECU serial number mismatch has been detected during RoadLogs synchronization with vehicle data received from CAN interface. OR A MID mismatch has been detected during RoadLogs synchronization with vehicle data received from J1708 interface. The NO_ECM condition has been corrected. RoadLog is configured to synchronize with the vehicle via speed pulses AND During the timeframe of the GPS plausibility check, vehicle motion is detected... AND Distance travelled according to GPS data conflicts with distance travelled as measured by vehicle speed pulses. 139 140 RoadLog Files Support / Warranty Event Code Occurrence / Condition PLSERR CDSTER CSPERR CRPMER CRPMOK JDSTER JSPDER JRPMER JRPMOK LTLNOK TSYCOK GPSERR GPS_OK GPS_FF MOVOFF OVERLP RoadLog is configured to synchronize with the vehicle via speed pulses AND During the timeframe of the GPS plausibility check, no vehicle motion is detected. RoadLog is calibrated to be synchronized with vehicle via CAN interface AND Vehicle total distance data has not been received from CAN bus. RoadLog is calibrated to be synchronized with vehicle via CAN interface AND Vehicle speed data has not been received from CAN bus. RoadLog is calibrated to be synchronized with vehicle via CAN interface... AND Engine speed data has not been received from CAN bus. RoadLog is calibrated to be synchronized with vehicle via CAN interface... AND CRPMER event is active... AND RoadLog has successfully received engine speed data from CAN bus. RoadLog is calibrated to be synchronized with vehicle via J1708 interface... AND RoadLog has not received vehicle total distance data from J1708 interface. RoadLog is calibrated to be synchronized with vehicle via J1708 interface... AND Vehicle speed data has not been received from J1708 interface. RoadLog is calibrated to be synchronized with vehicle via J1708 interface... AND Engine speed data has not been received from J1708 interface. RoadLog is calibrated to be synchronized with vehicle via J1708 interface... AND JRPMER event is active... AND RoadLog has successfully received engine speed data from JRPMOK interface. Valid positioning data (GPS) obtained. GPS signal quality has improved and system time synchronization can occur. GPS receiver error. The GPSERR condition has been corrected. RoadLog performs the first GPS position after entering Full Function State. The vehicle has changed positions since the last power OFF. Driver RODS data found in RoadLogs memory REPAIR APPROVALs with driver RODS data found on the Driver Key. Data cannot be merged. 18. Support / Warranty Access to support for VDO RoadLog and VDO RoadLog Fleet Management Software is available directly through the Fleet Software. Click the Support button for links to software updates, data backups, and NetViewer software that will allow RoadLog Technical Support personnel to share your computer screen online, to help diagnose problems and answer questions. VDO RoadLog support is available at:
Technical Support Email: RoadLog-support@vdo.com Tel.: (855)-RoadLog, or (855) 762-3564 Customer Service Fax: (800) 752-7224 or (610) 366-9837 Email: RoadLog-sales@vdo.com www.vdoRoadLog.com Warranty Registered RoadLog users can find the complete VDO RoadLog Warranty at:
www.vdoroadlog.com/users 141 142 Glossary Glossary 19. Glossary Adverse driving conditions DVIR HOS RODS On Duty time (ON) Conditions that interfere with normal safe driving that were not known to the person dispatching the run at the time it began. Includes snow, sleet, fog, ice or unusual road or traffic conditions. Driver Vehicle Inspection Report. The report on vehicle functions, parts and accessories that must be completed by Drivers at the completion of each day and the beginning of the next day. Hours of Service. The set of regulations issued by Federal Motor Carrier Safety Administration setting the maximum allowed working hours for Drivers operating a commercial motor vehicle in US. Records of Duty Status. Records of a Drivers work activities for a day. The time from when a Driver begins to work or is required to be in readiness to work until the time the Driver is relieved from work and all responsibility for performing work. On duty time includes:
All time at a plant, terminal, facility or other property of a motor carrier or shipper, or on any public property, waiting to be dispatched, unless the Driver has been relieved from duty by the motor carrier. All time inspecting, servicing, or conditioning any commercial motor vehicle at any time. All driving time as defined in the term driving time. All time, other than driving time, in or upon any commercial motor vehicle except time spent resting in a sleeper berth. All time loading or unloading a commercial motor vehicle, supervising, or assisting in the loading or unloading, attending a commercial motor vehicle being loaded or unloaded, remaining in readiness to operate the commercial motor vehicle, or in giving or receiving receipts for shipments loaded or unloaded. All time repairing, obtaining assistance, or remaining in attendance upon a disabled commercial motor vehicle. All time spent providing a breath sample or urine specimen, including travel time to and from the collection site, in order to comply with the random, reasonable suspicion, post-
accident or follow-up testing when directed by a motor carrier. Performing any other work in the capacity, employ or service of a motor carrier. Performing any compensated work for a person who is not a motor carrier. Sleeper Berth time (SB) All time spent by the Driver in the sleeper berth. Driving time (D) Off Duty time All time spent at the driving controls of a commercial motor vehicle in operation. All the remaining time for which the Driver is not in ON or SB. Twenty-four hour period Any 24 consecutive hour period beginning at the time designated by the motor carrier for the terminal from which the Driver is normally dispatched. Seven consecutive days (7 days) Eight consecutive days (8 days) The period of 7 consecutive days beginning on any day at the time designated by the motor carrier for a 24-hour period. The period of 8 consecutive days beginning on any day at the time designated by the motor carrier for a 24-hour period. Supporting Documents. SD 143 FMCSA Sleep mode Active mode Deactivated mode Download Upload GPS GPRS GSM USB Federal Motor Carrier Safety Administration. RoadLogs low power consumption mode. RoadLog functionalities are not available in this mode and the display is turned off. Operation mode in which RoadLog has all functionalities available. RoadLog is not connected to power supply. Data transfer from RoadLog to a flash drive, usually a RoadLog Driver Key or Fleet Key. Data transfer from a USB flash driver to RoadLog. Global Positioning System. General Packet Radio Service. Global System for Mobile Communications Universal Serial Bus serial bus interface standard for connecting electronic devices. Driver Key Special USB flash drive used by the Driver to transfer logbook data. Fleet Key Special USB flash drive used by the Company to configure the RoadLog device and download/upload data to/from RoadLog and the Fleet Management Software. Also used to authenticate software licensing when starting the RoadLog Fleet Software. Daily reset condition The time of the day when the Driver accumulates the required off duty time for that day, according to FMCSA HOS rules. Once the daily reset condition is reached, the duty calculations are reset. 144 Legal Notices Legal Notices 20. Legal Notices This product may contain software available under open source licenses. Some of this software in source code, object code or other forms may be available at www.vdoroadlog.com/oss5_2012 or upon request to:
Technical Support Continental 6755 Snowdrift Rd Allentown PA, 18106 roadlog-support@vdo.com The libraries are distributed in the hope that they will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA This product includes software developed by Paul Mackerras This product includes software developed by Computing Services at Carnegie Mellon University (http://www.cmu. edu/computing/). To the extent permissible under the law, Continental reserves the right to charge for the costs of research, duplication, shipping and handling associated with such requests. This product includes software developed by Tommi Komulainen This product includes software developed by Pedro Roque Marques This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) This product includes software written by Tim Hudson (tjh@
cryptsoft.com) VDO RoadLog Copyright 2016 Continental AG Part of this product is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this product. If not, see <http://www. gnu.org/licenses/>. VDO RoadLog Copyright 2016 Continental AG This product contains libraries which are free software; you can redistribute them and/or modify them under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. David Mazieres Vincent Rijmen Antoon Bosselaers Paulo Barreto Markus Friedl Theo de Raadt Niels Provos Dug Song Aaron Campbell Damien Miller Kevin Steves Daniel Kouril Wesley Griffin Per Allansson Nils Nordman Simon Wilkinson Ben Lindstrom Tim Rice Andre Lucas Chris Adams Corinna Vinschen Cray Inc. Denis Parker Gert Doering Jakob Schlyter Jason Downs Juha Yrj Michael Stone Networks Associates Technology, Inc. Solar Designer Todd C. Miller Wayne Schroeder William Jones Darren Tucker Sun Microsystems The SCO Group Daniel Walsh Eric Young (eay@cryptsoft.com) Tim Hudson (tjh@cryptsoft.com)Red Hat Software Mentor Graphics (http://www.mentor.com) Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
Acknowledgements go, in no particular order, to:
The Regents of the University of Michigan Livingston Enterprises, Inc. Paul Mackerras Alan Curry Michal Ostrowski Mitchell Blank Jr. Carnegie Mellon University The Regents of the University of California RSA Data Security, Inc. Lars Fenneberg WIDE Project. Francis.Dupont@inria.fr, INRIA Rocquencourt Jean-loup Gailly Mark Adler Kungliga Tekniska Hoegskolan Eric Rosenquist Pedro Roque Marques Matjaz Godec Miguel A.L. Paraz GIE DYADE, Tommi Komulainen Roaring Penguin Software Inc. Sun Microsystems, Inc. Torsten Landschoff Google, Inc. Netservers Andrew Bartlet Sean E. Millichamp Marco dItri Katalix Systems Ltd Diego Rivera Andrew Tridgell Anton Blanchard Jeremy Allison Martin Pool Paul `Rusty Russell Simo Sorce Bitstream, Inc Tavmjong Bah Erik Andersen Denys Vlasenko Internet Systems Consortium, Inc. (ISC) Internet Software Consortium Digital Equipment Corporation. Craig Metz Tuukka Karvonen <tkarvone@iki.fi>
Purdue Research Foundation, West Lafayette, Indiana Victor A. Abell RSA Data Security, Inc. Tatu Ylonen <ylo@cs.hut.fi>, Espoo, Finland CORE SDI S.A., Buenos Aires, Argentina 145 146 Legal Notices Legal Notices CONTINENTAL AUTOMOTIVE SYSTEMS US, INC. , A DELAWARE CORPORATION, CERTIFIES THAT THIS VDO ROADLOG DEVICE COMPLIES WITH ALL REQUIREMENTS OF 49 CFR 395.15 (AUTOMATIC ON-
BOARD RECORDING DEVICES) WHEN MAINTAINED IN PROPER WORKING ORDER AND OPERATED AS INSTRUCTED IN THIS OWNERS MANUAL. NEITHER CONTINENTAL AUTOMOTIVE SYSTEMS US, INC. NOR ITS PARENT, SUBSIDIARIES OR AFFILIATES ARE RESPONSIBLE FOR ANY DRIVER ERROR OR FOR SYSTEMS NOT MAINTAINED IN PROPER WORKING ORDER. Legal Foundation United States federal motor carrier safety regulations permit a motor carrier to require a Driver to use an automatic on-
board recording device to record the Drivers hours of service. The use of automatic on-board recording devices is regulated by 49 CFR 395.15. The regulations require the operator of a vehicle and the company who employs the operator to conform to a number of obligations and responsibilities. The following list is not guaranteed to be complete or legally valid. Requirements of the Automatic On-Board Recording Device The device shall produce, upon demand, a Drivers hours of service chart, electronic display, or printout showing the time and sequence of duty status changes, including the Drivers starting time at the beginning of each day. The device shall have a means by which authorized federal, state, or local officials can immediately check the status of a Drivers hours of service. Obligations of the Driver The Driver must use the automatic on-board recording device if required to do so by his or her employer. The Driver shall have in his or her possession and available for inspection while on duty records of duty status for the previous seven (7) or eight (8) consecutive days. All hard copies of the Drivers record of duty status must be signed by the Driver. Entries must be made by the Driver only. Drivers must note any failure of automatic on-board recording devices and reconstruct his or her record of duty status for the current day and the past seven days and continue to prepare handwritten records until the device is operational again. Drivers must review and verify that all entries are accurate prior to submission to the employer motor carrier. Obligations of the Company Motor carriers must ensure that a certificate is obtained from the manufacturer of the on-board recording device certifying that the device has been sufficiently tested to meet the requirements of 49 CFR 395.15. The motor carrier must ensure that the on-board recording device permits duty statuses to be updated only when the vehicle is at rest, except when registering the time a vehicle crosses a state boundary. The motor carrier must ensure that the device and associated support systems are, to the maximum extent possible, tamperproof and do not permit alterations of the information concerning the Drivers hours of service. The motor carrier must ensure that the device warns the Driver visually or audibly that the device has ceased to function. The motor carrier must ensure that the device is maintained and recalibrated in accordance with the manufacturers specifications. The motor carrier must ensure that Drivers are adequately trained in proper operation of the device. The motor carrier must maintain a second, back-up copy of the electronic hours-of-service files in a different physical location than where the original data is stored. FCC part 15.105 Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. FCC part 15.21 Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Radiofrequency radiation exposure Information:
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Radiofrquence exposition aux rayonnements Information :
Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. Ce transmetteur ne doit pas etre place au meme endroit ou utilise simultanement avec un autre transmetteur ou antenne. 147 148 Continental Commercial Vehicles & Aftermarket 6755 Snowdrift Road, Allentown, PA 18106 USA www.vdoroadlog.com For more information and to become a VDO RoadLog distributor or retailer call:
1-800-564-5066 or 610-366-8489 E-mail: roadlog-sales@vdo.com For installation and service questions contact:
VDO Technical Support:
Tel: (855)-ROADLOG, or (855) 762-3564 E-mail: roadlog-support@vdo.com VDO and RoadLog Trademarks of the Continental Corporation 2016 Continental Corporation Printed in the USA TD00.3290.00100102
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2016-06-27 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
2 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2016-06-27
|
||||
1 2 | Applicant's complete, legal business name |
Continental Automotive Systems, Inc
|
||||
1 2 | FCC Registration Number (FRN) |
0025320508
|
||||
1 2 | Physical Address |
6755 Snowdrift Road
|
||||
1 2 |
Allentown, Pennsylvania 18106
|
|||||
1 2 |
United States
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
T******@cetecom.com
|
||||
1 2 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
2AHPQ
|
||||
1 2 | Equipment Product Code |
3290Z
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
A**** C****
|
||||
1 2 | Title |
Segment Leader
|
||||
1 2 | Telephone Number |
48420********
|
||||
1 2 | Fax Number |
61028********
|
||||
1 2 |
a******@continental-corporation.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DTS - Digital Transmission System | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Vehicle Data Recorder | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | Output power listed is peak conducted. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
CTC advanced GmbH (former CETECOM ICT Services )
|
||||
1 2 | Name |
G****** S******
|
||||
1 2 | Telephone Number |
49-68********
|
||||
1 2 | Fax Number |
49-68********
|
||||
1 2 |
t******@ctcadvanced.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0040000 | ||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0060000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC