FCC ID: LHJ-WT50NA02 2G, 3G, LTE cat11 module

 

Model: HNA11_00

Installation Instructions for

Telematics Control Unit

RAMSES

(“Router And Mobile SErviceS”)

1



Table of Contents

1.0

INTRODUCTION ......................................................................................................... 3

1.1 PURPOSE AND SCOPE ............................................................................................................... 3

1.2 TCU FUNCTIONALITY ............................................................................................................... 3

2.0 ELECTRICAL HARDWARE DESCRIPTION .............................................................. 4

2.1 POWER & GROUNDING ............................................................................................................. 4

2.2 TCU INTERFACE TO EXTERNAL RF SIGNALS......................................................................... 4

2.3 AUDIO SUBSYSTEM .................................................................................................................. 4

3.0 LABELING .................................................................................................................. 5

4.0 VEHICLE INSTALLATION GUIDELINES .................................................................. 6

5.0 REGULATORY COMPLIANCE NOTES...................................................................... 6

6.0 EXTERNAL ANTENNA REQUIREMENTS FOR USE WITH HNA11_00 TCU ............ 7

INSTRUCTIONS TO OEMS ......................................................................................... 8

7.0

2

1.0 INTRODUCTION

The Telematics Control Unit (TCU) described herein is a vehicle mounted Telematics control

unit designed and manufactured by Continental for exlusive use by a premium automotive

OEM. The product name has been designated by the customer as RAMSES (Router And

Mobile SErviceS). The TCU contains an embedded LTE wireless communication module

and interacts with remote call/data centers to provide valuable services to the vehicle

customer.

1.1 PURPOSE AND SCOPE

This conditions document is to provide installation instruction to OEM to insure safe use of

the device.

1.2 TCU FUNCTIONALITY

The RAMSES TCU provides LTE advanced connectivity to the vehicle and interfaces to the

vehicle head unit as well as the Ethernet buss. The TCU is designed to

•

intiate automatic emergency calls if an automatic emergency call trigger is received;

• allow initiation of a Manual Emergency Call by a car occupant;

• allow manual initiation of Roadside Assistance or Inforamtion Calls by a car

occupant;

• establish Data Packet Connection with telematics service;

• establish Data Packet Connection to support the internet connection of Head Units

equipped with WiFi (Head Unit is not Continental’s product).

3



Key:

2.0 ELECTRICAL HARDWARE DESCRIPTION

2.1 POWER & GROUNDING

The power supply subsystem for the Ramses TCU conditions unfiltered fused vehicle battery

input and distributes the necesary regulated voltages required for each of the subsystems and

circuits in the design.

Vehicle battery nominal is defined as:

Nominal 13.5V (The operating voltage range as UBmin=6V, UBmax=16V)

2.2 TCU INTERFACE TO EXTERNAL RF SIGNALS

These connectors provide coaxial connection for RF signals for LTE and GPS connectivity to

antennas. They are populated as needed for each variant technology.

2.3 AUDIO SUBSYSTEM

The Ramses TCU audio system will provides a hands-free user interface for emergency

Telematics calling within a vehicular environment. The user interface is realized through the

seamless connection between the Ramses TCU module and the vehicle.

At a glance Ramses audio system shall provide the following interfaces.

• Microphone front end input with switchable bias

Amplified speaker driver via class D amplifier

Speaker load diagnostics and protection via PA I2C

Support for digital audio IO via HDBaseT

•

•

•

•

Hands-free processing and prompt playback realized by the SOC

4

1GNSS IN1DRX0 / Backup2GNSS OUT2Primary TX/RXDual Fakra (Beige / Code I)Dual Fakra (Blue / Code C)3.0 LABELING

TCU labeling comply with the regulatory homologation compliance mark(s) that are required

by law in the country.

Label Location

Fig.1. Label location on the device.

Fig. 2. Label for HNA11_00 variant.

5

4.0 VEHICLE INSTALLATION GUIDELINES

Normal operating conditions are between -40oC to +80oC.

The sheet metal cover is designed to be a heat sink. A gap between the heat sink and the

mounting surface is recommended to facilitate heat transfer out of the module. Exceptions

can be made if the module is mounted to a surface that can help facilitate heat transfer such

as a large aluminum body panel.

WARNING: When the temperature of the device is above 70oC, the metal cover will be hot.

DO NOT TOUCH.

The device does not have sealed connectors. It is designed to meet Class I water intrusion

conditions (no drip test required), so it should not be placed in area that can get wet.

Continental recommends that the automotive OEM uses the mating harness supplier’s

recommendations for the keep out zone around the connectors to ensure proper mating of

each connector.

Changes or modifications to this system by other than a facility authorized by Continental

could void authorization to use this equipment.

5.0 REGULATORY COMPLIANCE NOTES

FCC:

This device complies with Part 15, Part 22(H), Part 24(E) and Part 27 of the FCC Rules. The

device contains FCC ID LHJ-WT50NA02. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may cause

undesired operation.

FCC Part 15B Statement:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

- Reorient or relocate the receiving antenna.

6

Increase the separation between the equipment and receiver.

-

- Connect the equipment into an outlet on a circuit different from that to which the

- Consult the dealer or an experienced radio/TV technician for help.

receiver is connected.

INDUSTRY OF CANADA:

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to

the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired

operation of the device.”

« Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils

radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le

brouillage est susceptible d'en compromettre le fonctionnement. »

This device contains a radio transmitter with IC ID 2807E-WT50NA02 has been approved by

Industry Canada to operate with the antenna types listed below with the maximum

permissible gain indicated. Antenna types not included in this list, having a gain greater than

the maximum gain indicated for that type, are strictly prohibited for use with this device.

« Cet appareil contient un émetteur radio avec IC ID 2807E-WT50NA02 a été approuvé par

Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un

gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est

supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de

l'émetteur.».

MEXICO:

La operación de este dispositivo está sujeta a las siguientes dos condiciones:

(1) Este equipo o dispositivo no deberá ocasionar interferencias perjudiciales.

(2) Este equipo o dispositivo debe aceptar cualquier interferencia recibida, incluidas aquellas

que pudieran causar un funcionamiento no deseado.

6.0 EXTERNAL ANTENNA REQUIREMENTS FOR USE WITH HNA11_00 TCU

The HNA11_00 device is for use with external antennas ONLY.

This radio transmitter (FCC ID: LHJ-WT50NA02; IC: 2807E-WT50NA02) has been

approved by FCC and Industry Canada to operate with the antenna types listed below with

the maximum permissible gain indicated. Antenna types not included in this list, having a

gain greater than the maximum gain indicated for that type, are strictly prohibited for use

with this device.

« Le présent émetteur radio (ID: LHJ-WT50NA02; IC: 2807E-WT50NA02) a été approuvé

par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant

un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain

7



est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de

l’émetteur. »

7.0 INSTRUCTIONS TO OEMS

The OEM must inform the end-user (i.e. the owner / driver of the car with this device

installed) that “The installation of HNA11_00 with its radio transmitters and antennas is in

compliance with the U.S. and CANADA RF Exposure Regulations”. This text, or similar,

must be included into the car manual.

Antenna Information:

Only the same or equivalent-type antennas as shown below have been evaluated and may be

used with this module. Other un-equivalent-type antennas may require additional

authorization for operation. The equivalent-type means the same antenna type that results in

similar in-band and out-of-band radiation patterns.

For incorporation in Vehicle platform (the distance from the antenna to the user according to

OEM installation requirements):

Brand

Model Name

Antenna Type

Connector Note

CONTINENTAL RKE223E1GNS External roof mounted Fakra

CONTINENTAL RKE223E1HAF External roof mounted Fakra

Non-HAF MRA2

Antenna

HAF MRA2

Antenna

With antenna Gain as listed in the table below:

Band

Total System Gain Antenna

Cell3 component, dBi

GSM-850

GSM-1900

WCDMA II

WCDMA IV

WCDMA V

LTE B2

LTE B4

LTE B5

LTE B7

LTE B12

LTE B13

8

1.0

4.4

4.4

3.4

1.0

4.4

3.4

1.0

5.6

1.7

2.2

LTE B 66

3.4

Antenna Placement:

This device is authorized for installation in qualified vehicles that can provide enough

minimum separation distance. To ensure RF exposure compliance the antenna(s) used with

this module must be installed in vehicles to provide a minimum separation distance, in all

operating modes and orientations of the vehicles. The separation distance is measured from

the antenna and the passengers in all directions for potential exposure conditions. This

module must not be co-located with any other RF modules or transmitters. Additional SAR

evaluation and FCC equipment approval would be required if other RF modules or

transmitters are co-located with this module. The required minimum separation distance for

the antenna placement is 10.25 mm.

9



 

 

WT50NA02 OEM Manual and User Guide WT50NA02 OEM Manual and User Guide v 3

(to be used for certification) FCC ID: LHJ-WT50NA02 IC: 2807E-WT50NA02 WT50NA02 OEM Manual and User Guide Terms and Acronyms Code Division Multiple Access Data Connectivity Module Discontinuous Reception Engineering Sample Frequency Division Duplex CDMA DCM DRX ES FDD GLONASS GLOBalnaya NAVigatsionnaya Sputnikovaya Sistema GNSS GPIO GSM HU HSIC LTE MP NAD OEM PCB PHY SIM TCU TDD TSP UMTS WCDMA Wideband Code Division Multiple Access Global Navigation Satellite System General Purpose Input Output Global System for Mobile Head Unit High Speed Inter-Chip Long Term Evolution Mass Production Network Access Device Original Equipment Manufacturer Printed Circuit Board Physical Layer Subscriber Identity Module Telematics Control Unit Time Division Duplex Telematics Service Provider Universal Mobile Telecommunication System WT50NA02 OEM Manual and User Guide WT50NA02 Module The WT50NA02 NAD is a proprietary modem module designed by Continental Automotive Systems, Inc. The modem will be integrated into Data Connectivity Modules (DCMs) or Head Units (HUs) designed and produced by Continental or by a 3rd party for use by automotive OEMs. DCMs will be installed into vehicles during the OEMs factory assembly process and will not be accessible without use of special tools. Primary use-cases are data-centric with data and voice connections to Telematics Service Providers

(TSP). 1 Key Features 1.1 LTE CAT11 NAD Module Air Interface Support LTE FDD/TDD: 3GPP Rel 11 LTE FDD CAT11 UMTS: HSUPA CAT 6 (up to 5.76-Mbps), HSPA CAT14 (up to 21-Mbps) 2 Regulatory Compliance Notes FCC:

This device complies with Part 15, Part 22(H), Part 24(E) and Part 27 of the FCC Rules. The FCC ID for this device is LHJ-WT50NA02. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Industry of Canada:

This device complies with Industry Canadas license-exempt RSSs. Operation is subject to the following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. This radio transmitter (2807E-WT50NA02) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (2807E-WT50NA02) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne WT50NA02 OEM Manual and User Guide non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de l'metteur.. 3 Device Installation and User Manual The WT50NA02 module is a proprietary product designed and manufactured by Continental Automotive Systems, Inc. for integration into telematics control units manufactured by Continental Automotive Systems, Inc. for automotive OEMs. i. The module is limited to installation ONLY in an integrated device manufactured by Continental Automotive Systems, Inc. integrated device. ii. During manufacturing process of the integrated device, the module is soldered onto the pcb of the iii. The integrated device must provide RF connectors to external antennas or RF traces to connect the WT50NA02 modules to antennas inside the integrated device. The typical reference design for the RF trace layout, including pcb stack-up and trace length is described in Section 6 of this document. iv. Automotive OEM is responsible for ensuring that the end-user has no manual instructions to remove or install module. v. The module is limited to installation in mobile applications, according to Part 2.1091(b). vi. No other operation configurations are allowed. vii. Changes or modifications to this system by other than a facility authorized by Continental could void authorization to use this equipment. viii. The module must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operate in conjunction with any other antenna or transmitter. ix. The integrator is responsible for fulfilling FCC and IC requirements for the integrated device. If Continental chooses to re-use modular approval, then the TCU shall be clearly labeled with an external label containing the integrated modems FCC ID. For example, the label can include text Contains device with FCC ID: LHJ-WT50NA02 and IC: 2807E-WT50NA02. 4 Antenna requirements for use with WT50NA02 module:

The module must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The WT50NA02 module is for use with external antennas ONLY. For all standalone LTE/WCDMA/GSM operations the maximum antenna gain including cable loss shall not exceed the following values:

o GSM 850: 5.1 dBi o GSM 1900: 2.5 dBi o WCDMA Band II: 8.5 dBi o WCDMA Band IV: 5.5 dBi o WCDMA Band V: 6.7 dBi o LTE Band 2: 9.0 dBi o LTE Band 4: 6.0 dBi WT50NA02 OEM Manual and User Guide o LTE Band 5: 7.1 dBi o LTE Band 7: 9.0 dBi o LTE Band 12: 6.6 dBi o LTE Band 13: 6.9 dBi o LTE Band 66: 6.0 dBi This radio transmitter (FCC ID: LHJ-WT50NA02; IC: 2807E-WT50NA02) has been approved by FCC and Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. Le prsent metteur radio (ID: LHJ-WT50NA02; IC: 2807E-WT50NA02) a t approuv par Industrie Canada pour fonctionner avec les types d'antenne numrs ci-dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est suprieur au gain maximal indiqu, sont strictement interdits pour l'exploitation de lmetteur. 5 Instructions to OEMs:

Continental must instruct the automotive OEM and provide them to include the following information into the car users manual (i.e. for the DCM):

1. End-users must be provided with transmitter/antenna installation requirements and operating conditions for satisfying RF exposure compliance:

2. A separate section should clearly state FCC RF Exposure requirements:

3. Required operating conditions for end users. 4. The antenna used with this device must be installed to provide a separation distance of at least 20cm from all persons, and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures. 5. The Maximum ERP/EIRP and maximum antenna gain required for compliance with Parts 15, 22H, 24E, and 27. 6. Clear instructions describing the other partys responsibility to obtain station licensing. WT50NA02 OEM Manual and User Guide 6 Layout and Routing Recommendations Module Specific 6.1 The pad spacing of 1mm should allow the placement of a 600m finished VIA between pads, while maintaining a 200um Via- to-trace or Via-pad spacing, to facilitate the breakout of inner row signals. The 1mm spacing is also large enough to route two 200m (8 mil) traces between pads. Figure 6-1 Vias placed between Pads 6.2 The NAD has three antenna pins. RF Traces for antennas PRIMARY_ANT SECOND_ANT GNSS_ANT The figure below shows the general breakout of the module:

WT50NA02 OEM Manual and User Guide Figure 6-2: NAD Pin Breakout The LTE CAT4 NAD should be oriented on the main board to minimize the length of the PRIMARY_LTE antenna pin (LTE Ant1). This 50ohm line should be as short as possible to the external RF connector or internal antenna feed point. The RF traces from the NAD antenna pins on the main board can be stripline or microstrip. For the stripline approach, vias should be placed to the NAD EDGE SIDE of the pins as close as possible to the NAD antenna pads to minimize any impedance discontinuity (see figure 38). For the microstrip approach, the PCB insertion loss will be less but the short route under the NAD MUST BE TREATED AS STRIPLINE SO IT WILL BE NARROWER UNDER THE NAD THAN THE MICROSTRIP LINE. The NAD has ground cleared out under the RF antenna routes as shown below:

WT50NA02 OEM Manual and User Guide Figure 6-2: Antenna Pad Ground Cutout (Top View) For routing microstrip lines UNDERNEATH the NAD on layer 1, these ground cutouts internal to the NAD need to be accounted for in the stripline calculation. The internal GND height and dielectric constant of the NAD board are shown below:

H = 19.3 mils (491 micron) Dielectric Constant = 4.1 For example, consider the following stackup for a main PCB:

Figure 6-3 Assume the main PCB above with a 6 layer stackup with ground cut away on layer 2 so the microstrip lines reference ground on layer 3. The dielectric thickness from L1 to L3 is 21.2 mils. Using an online impedance calculator, the line width under the NAD for a 50 ohm line is 16.9mils

(433micron) shown below:

WT50NA02 OEM Manual and User Guide BL Figure 6-4 The calculation for the microstrip line width outside the NAD is 37.7mils (967micron) shown below:

Figure 6-5 Due to the nature of the weave chosen for each PCB, the dielectric constant of the NAD board is 4.1 while the main board is 4.3. A dielectric constant of 4.2 was chosen in the stripline calculation, while 4.3 was used for the microstrip calculation. Main board stack up may vary so these line widths may need to be recalculated. IT IS HIGHLY RECOMMENDED TO USE A SIMILAR STACKUP AS SHOWN IN FIGURE 39 WITH MICROSTRIP ROUTING AND GND CUTS ON LAYER 2 WITH GND REFERENCE ON LAYER 3. THERE SHOULD BE NO ROUTING ON L2 AND SOLID GND ON L3 UNDERNEATH THESE ANTENNA LINE MICROSTRIP TRACES. The antenna traces need to routed STRAIGHT OUT OF THE NAD TO THE NEAREST NAD EDGE. The lines need to be tapered from 433micron to the 967micron width gradually but quickly. WT50NA02 OEM Manual and User Guide Figure 6-6 These line widths may vary depending on the stackup selected for the main board. 6.3 RF Antenna Layout Parameters Type of Guidance Trace impedance Total route length Ground between signals Spacing to other signals Requirement 50-Ohms 10% single-ended

<100-mm

> 3 x line width of ground trace between, stitched VIA to ground

< 3:1 Signals should be routed along similar route path, but separated by ground trace. Trace impedances should match the table, either as microstrip or stripline. Total length for both signals should match the table. Spacing to ground or other signals on outside of bundled signals should match the table.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

en

| Mercedes-Benz RAMSES (Router And Mobile SErviceS) A XXX XXX XX XX / XXX Model: HNA11_00 Qxxx Version: R...RV...V A XXX XXX XX XX ZGS(HW): xXxxx xx/xx A XXX XXX XX XX ZGS(SW): xxx xx/xx/xx IMEI: AXXXXAAXXXKKAXK 13.5VDC === 1.5Arms Continental P/N: A2Cxxxxxxxx Serial No.: XXXXXXXXXXXXXXXXXXXX Date of Manufature: yyyy/mm/dd Continental Automotive Hungary Kft Hazgyari ut 6-8 H-8200 Veszprm, Hungary Manufactured in XXXXXXX IFT: XXXXXXXXXX Contains FCC ID: LHJ-WT50NA02 Contains IC: 2807E-WTSONA02 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND INDUSTRY CANADA LICENSE-EXEMPT RSS. STANDARD(S). OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. Pitt) A2CXXXXXXX-XXXXXXXXXXKXXXXAXXXXAKK

 

 

Mercedes-Benz RAMSES (Router And Mobile SErviceS) AK O20 XX / 00K Model: XXXXX_XX Version: R...RV..V Qxxx A001 20000 90 ZGS(HW): 1000 oxox Aw 1001 1000 ZGS(SW): 100 eX ou IMEI, exnecnvcccncce 13,5V === 1.50 Continental PIN: A2Cxx00000%

Serial No.: XXXXXXXKKKXXKAKKK Date of Mantature: yyyyimnids Continental Automotive GmbH Vahrenwaider Strasse 9 30165 Hanover, Germany Matar in XXXXXXX. Contains FCC ID: LHJ-WTS50NA02 Contains IC:

2807E-WTS0NA02 IFT: OOOO WOM 3%

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES AND INDUSTRY CANADA LICENSE-EXEMPT RSS STANDARD(S), OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND

(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

 

 

Continental Product Label Design and Location 1. Label ( Size : 10*25 mm ) White silk CERT MODEL : WT50NA02 FCC ID : LHJ- WT50NA02 IC: 2807E-WT50NA02

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 To: Federal Communication Commission From: Continental Automotive Systems, Inc. Regarding: Confidentiality Request regarding application for FCC ID LHJ-WT50NA02 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commissions rules, the applicant hereby requests confidential treatment of the documents listed below, associated with the certification application referenced above. 21440 W Lake Cook Rd. Deer Park, IL, 60010 Schematics Block Diagram Operational Description Parts List / BOM Tune Up Procedure The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. SHORT TERM CONFIDENTIALITY Additionally, the applicant requests the following documents be held confidential until the device is marketed or 180 days from the grant date, whichever is less. If the device is marketed within 180 days of the Grant Date, the applicant will notify the TCB per FCC KDB 726920 D01 Confidentiality Request Procedures. External Photos Internal Photos User Manual Test Set-up photos Sincerely, James Zhang Engineering Manager On behalf of Continental Automotive Systems, Inc.

 

 

21440 W Lake Cook Rd. Deer Park, IL, 60010, U.S.A. Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 June-10-2019 To: Federal Communication Commission From: Continental Automotive Systems, Inc. Regarding: Request for FCC single modular certification for FCC ID: LHJ-WT50NA02 Dear Sir/Madam, We hereby request a "Singular Modular" certification for the FCC ID referenced above. The device meets the requirements indicated below as outlined in the FCC KDB 996369 D01 Module Equip Auth Guide v02 The device has buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal;

The device has its own RF shielding The device has power supply regulation on the module;

The device will be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b);

The device has demonstrated compliance in a stand-alone configuration;

The device will be labeled with its permanently affixed FCC ID label. The device does comply with all specific rules applicable to the transmitter including all the conditions provided in the integration instructions by the grantee;

The device does comply with RF exposure requirements. Sincerely, Name: James Zhang Title: Engineering Manager On behalf of Continental Automotive Systems, Inc.

 

 

To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 21440 W Lake Cook Rd. Deer Park, IL, 60010 From: Continental Automotive Systems, Inc. Regarding: LHJ-WT50NA02 To whom it may concern:

We, the undersigned, hereby authorize Antonio Olivares Lpez to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by DEKRA Testing and Certification SAW, still resides with Continental Automotive Systems, Inc. This authorization is valid until further written notice from the applicant. Name : James Zhang Title: Engineering Manager Signature:

On behalf of Company: Continental Automotive Systems, Inc. Telephone: (847)862-2435

 

 

Federal Commutations Commission 7435 Oakland Mills Rd Columbia MD 21046-1609 Date: May 23rd, 2019 TO:

Regarding: LHJ-WT50NA02 ATTN: Director of Certification:

We, the undersigned, hereby declare that device FCC ID: LHJ-WT50NA02 module supports LTE Release 11. Version of LTE Release used for implementation and testing: LTE Rel. 11, TS 36.101 v 11.8.0. The associated 3GPP release and version numbers required for power measurements and RF test setup conditions: LTE Rel. 11, TS 36.521-1 v.14.3.0. Carrier Aggregation is not supported by this module. SC-FDMA is not supported. EU Rel 11, Category 11. CoMP, HetNet, Relay, SON, cross carrier scheduling, enhanced downlink MIMO, MBMS, M2M/D2 are not supported. This device is intended for use with roof-mount antennas which are more than 20 cm away from persons. SVLTE is not supported. No other transmitters are contained in the module. Name (Printed): James Zhang Title: Certification Manager Signature:

On behalf of Company: Continental Automotive Systems, Inc. Telephone: (847)862-2420

 

 

DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel Highest Channel Report No: 2370ERM.002A1 Page 97 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST A.6: SPURIOUS EMISSIONS AT ANTENNA TERMINALS AT BLOCK EDGES LIMITS:

LIMITS Product standard:

FCC Part 22 / IC RSS-132 Test standard:

FCC 2.1051 and 22.917 / RSS- Clause 5.5. According to specification, the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. At Po transmitting power of 2 watts (33 dBm), the specified minimum attenuation becomes 43+10log (Po). and the level in dBm relative to Po becomes:

Po (dBm) [43 + 10 log (Po in watts)] = -13 dBm TEST SETUP The EUT RF output connector was connected to a spectrum analyzer and to the Universal Radio Communication Tester R&S CMW500 (selecting maximum transmission power of the EUT and different modes of modulation) using a 50-ohm attenuator and a power splitter. The reading of the spectrum analyzer is corrected with the attenuation loss of connection between output terminal of EUT and input of the spectrum analyzer. For LTE mode the configuration of modulation which is the worst case for conducted power was used. As indicated in FCC part 22, in the 1 MHz bands immediately outside and adjacent to the licensees frequency block or band, a resolution bandwidth of at least one percent of the emission bandwidth of the fundamental emission of the transmitter may be employed. Report No: 2370ERM.002A1 Page 98 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

S/01 TC#01 PASS LTE QPSK MODULATION RB=1 RB=1 RB=1. RB=1 Offset =0 Offset =0 Offset =0 Offset =0 Maximum measured level at lowest Block Edge at antenna port (dBm) BW = 1.4 MHz BW = 3 MHz BW = 5 MHz BW = 10 MHz

-18.06

-18.35

-19.52

-17.39 LTE QPSK MODULATION RB=6 RB=15 Offset =0 Offset =0 RB=25 Offset =0 RB=50 Offset =0 Maximum measured level at lowest Block Edge at antenna port (dBm) BW = 1.4 MHz BW = 3 MHz BW = 5 MHz BW = 10 MHz

-17.4

-16.9

-16.94

-17.62 LTE QPSK MODULATION RB=1 RB=1 RB=1 RB=1 Offset =5 Offset =14 Offset =24 Offset =49 Maximum measured level at Highest Block Edge at antenna port (dBm) BW = 1.4 MHz BW = 3 MHz BW = 5 MHz BW = 10 MHz

-23.99

-22.14

-21.8

-23.69 LTE QPSK MODULATION RB=6 RB=15 RB=25 Offset =0 Offset =0 Offset =0 RB=50 Offset =0 Maximum measured level at Highest Block Edge at antenna port (dBm) BW = 1.4 MHz BW = 3 MHz BW = 5 MHz BW = 10 MHz

-25.26

-23.06

-21.79

-23.3 Report No: 2370ERM.002A1 Page 99 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 1. Offset = 0. BW = 1.4 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 100 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 6. Offset = 0. BW = 1.4 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 101 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 1. Offset = 0. BW = 3 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 102 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 15. Offset = 0. BW = 3 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 103 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 1. Offset = 0. BW = 5 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 104 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 25. Offset = 0. BW = 5 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 105 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 1. Offset = 0. BW = 10 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 106 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

LTE QPSK MODULATION. RB = 50. Offset = 0. BW = 10 MHz Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 107 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

GPRS Modulation MODULATION Maximum measured level at highest Block Edge at antenna port (dBm) MODULATION Maximum measured level at highest Block Edge at antenna port (dBm) S/01 TC#02 PASS GPRS

-24.05 GPRS

-22.28 Lowest Channel Report No: 2370ERM.002A1 Page 108 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

WCDMA Modulation MODULATION Maximum measured level at highest Block Edge at antenna port (dBm) MODULATION Maximum measured level at highest Block Edge at antenna port (dBm) S/01 TC#03 PASS WCDMA

-20.14 WCDMA

-22.67 Report No: 2370ERM.002A1 Page 109 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

WCDMA MODULATION Lowest Channel Highest Channel Report No: 2370ERM.002A1 Page 110 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST A.7: RADIATED EMISSIONS Product standard:

FCC Part 22 / IC RSS-132. Test standard:

FCC 2.1053 and 22.917 / RSS-132 Clause 5.5. LIMITS:

LIMITS According to specification, the power of emissions shall be attenuated below the transmitter power (P) by a factor of at least 43 + 10 log (P) dB. P in watts. At Po transmitting power of 2 watts (33 dBm), the specified minimum attenuation becomes 43+10log (Po). and the level in dBm relative to Po becomes:

Po (dBm) [43 + 10 log (Po in watts)] = -13 dBm TEST SETUP The measurement was performed with the EUT inside an anechoic chamber. The spectrum was scanned from 30 MHz to at least the 10th harmonic of the highest frequency generated within the equipment. The EUT was placed on a non-conductive stand at a 3-meter distance from the measuring antenna for measurements below 1 GHz and at 1-meter distance for measurements above 1 GHz. Detected emissions were maximized at each frequency by rotating the EUT and adjusting the measuring antenna height and polarization. The maximum reading was recorded. Radiated measurements < 1GHz Radiated measurements > 1GHz Report No: 2370ERM.002A1 Page 111 of 129 08-26-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

RESULTS S/01 TC#01 PASS A preliminary scan determined the QPSK 5 MHz bandwidth as the worst case. The configuration of Resource Blocks which is the worst case for conducted power was used. The following plots show the results for this configuration. LTE QPSK MODULATION. RB = 1. Offset = 0. BW = 5 MHz TEST RESULTS (Cont):

FREQUENCY RANGE: 30-1000 MHz Lowest Channel Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 87.327000 826.596333 872.639000

(dBm)

(dBm)

-59.04 23.67 Fundamental

-24.03

-64.65 8.95

-29.45 Report No: 2370ERM.002A1 Page 112 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Lowest Channel FREQUENCY RANGE: 1-10 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 2045.200000 6816.500000 9104.500000

(dBm)

(dBm)

-46.84

-32.23

-30.87

-42.47

-24.88

-25.02 Report No: 2370ERM.002A1 Page 113 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz)

(dBm)

(dBm) 87.133000 835.455667 880.787000

-65.28 20.20

-38.89

-58.75 24.44

-23.48 Fundamental Report No: 2370ERM.002A1 Page 114 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 1-10 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 2019.600000 6882.500000 9890.000000

(dBm)

(dBm)

-47.06

-31.19

-29.13

-42.64

-24.74

-25.25 Report No: 2370ERM.002A1 Page 115 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz)

(dBm)

(dBm) 83.382333 709.323333 844.282667 891.909667

-62.67

-55.08 19.42

-26.62

-61.79

-35.68 28.77

-22.74 Fundamental Report No: 2370ERM.002A1 Page 116 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel FREQUENCY RANGE: 1-10 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 2035.400000 6978.500000 9128.000000

(dBm)

(dBm)

-47.54

-30.33

-29.36

-42.41

-25.47

-25.19 Report No: 2370ERM.002A1 Page 117 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

S/01 TC#02 PASS RESULTS A preliminary scan determined the GPRS Mode as the worst case. The following tables and plots show the results for this configuration. TEST RESULTS (Cont):

Lowest Channel FREQUENCY RANGE: 30-1000 MHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz)

(dBm)

(dBm) 83.414667 180.123667 204.729333 823.427667 869.308667

-69.39

-64.16

-62.14

-50.08

-23.62

-57.27

-49.77

-47.81 14.48 fundamental

-15.70 Report No: 2370ERM.002A1 Page 118 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Lowest Channel FREQUENCY RANGE: 1-10 GHz Frequency

(MHz) PK+_CLRWR PK+_MAXH

(dBm)

(dBm) 2101.800000 3753.000000 8459.500000

-45.94

-40.23

-32.17

-42.57

-34.30

-25.98 Report No: 2370ERM.002A1 Page 119 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR

(MHz) 182.031333 208.803333 836.522667 869.276333 881.498333

(dBm)

-65.78

-63.63

-50.20

-17.54

-50.30 PK+_MAXH

(dBm)

-55.12

-49.72 25.08

-15.57

-23.56 Comment fundamental Report No: 2370ERM.002A1 Page 120 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 1-10 GHz Maximizations Frequency PK+_CLRWR PK+_MAXH

(MHz)

(dBm)

(dBm) 2455.200000 6881.500000 9881.500000

-47.37

-31.22

-31.41

-42.90

-25.36

-25.31 Report No: 2370ERM.002A1 Page 121 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 179.477000 203.533000 848.421333 893.688000

(dBm)

-62.57

-63.52

-49.03

-28.42

(dBm)

-55.14

-51.73 24.13

-13.80 fundamental Report No: 2370ERM.002A1 Page 122 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel FREQUENCY RANGE: 1-10 GHz Maximizations Frequency

(MHz) 2027.600000 4006.000000 7445.500000 PK+_CLRWR

(dBm) PK+_MAXH

(dBm)

-48.07

-39.81

-32.64

-42.86

-33.89

-25.92 Report No: 2370ERM.002A1 Page 123 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

TESTED CONDITIONS MODES:

TEST RESULTS:

S/01 TC#03 PASS RESULTS A preliminary scan determined the WCDMA Mode as the worst case. The following tables and plots show the results for this configuration. TEST RESULTS (Cont):

Lowest Channel FREQUENCY RANGE: 30-1000 MHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 87.747333 180.253000 827.210667 872.768333

(dBm)

-72.86

-65.82

-21.77

-36.71

(dBm)

-64.22

-59.26

-7.54

-18.97 Fundamental Report No: 2370ERM.002A1 Page 124 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Lowest Channel FREQUENCY RANGE: 1-10 GHz Frequency

(MHz) 1363.200000 6922.000000 PK+_CLRWR PK+_MAXH

(dBm)

-46.53

-25.31

(dBm)

-52.76

-29.54 Report No: 2370ERM.002A1 Page 125 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz) 90.463333 179.832667 207.542333 837.880667 882.533000

(dBm)

-66.77

-66.49

-64.81

-20.07

-19.47

(dBm)

-61.85

-58.81

-58.10 3.75

-17.21 Fundamental Report No: 2370ERM.002A1 Page 126 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle Channel FREQUENCY RANGE: 1-10 GHz Frequency

(MHz) PK+_CLRWR

(dBm) PK+_MAXH

(dBm) 2027.800000 6985.000000 9443.000000

-47.73

-29.58

-29.74

-42.98

-25.38

-24.77 Report No: 2370ERM.002A1 Page 127 of 129 08-26-2019 Level in dBm DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest Channel FREQUENCY RANGE: 30 MHz-1 GHz Frequency PK+_CLRWR PK+_MAXH Comment

(MHz)

(dBm)

(dBm) 87.262333 178.636333 845.737667 892.685667

-69.13

-67.87

-20.11

-23.48

-59.90

-58.83

-5.29

-17.41 Fundamental Report No: 2370ERM.002A1 Page 128 of 129 08-26-2019 Level in dBm

 

 

DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America FCC LISTED, REGISTRATION NUMBER: 2764.01 ISED LISTED REGISTRATION NUMBER: 23595-1 Test report No:

2370ERM.004 Test report REFERENCE STANDARD:

USA FCC Part 27 CANADA ISED RSS-199 Identification of item tested Trademark Module Continental Automotive Systems, Inc. Model and /or type reference WT50NA02 Other identification of the product FCC ID: LHJ-WT50NA02 IC: 2807E-WT50NA02 Features Module supporting LTE, WCDMA and GSM Cellular Technologies Manufacturer Continental Automotive Systems, Inc. 21440 W. Lake Cook Rd, Deer Park, IL 60010, U.S.A. Test method requested, standard USA FCC Part 27 10-1-18 Edition CANADA IC RSS-199 Issue 3, Dec. 2016. Measurement Guidance 971168 D01 v02r02 for certification of Licensed Digital Transmitters. ANSI C63.26 2015. Summary Approved by (name / position &

signature) IN COMPLIANCE Domingo Galvez EMC&RF Lab Manager Date of issue 06-25-2019 Report template No FDT08_21 Report No: 2370ERM.004 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Index Competences and guarantees .................................................................................................... 3 General conditions ...................................................................................................................... 3 Uncertainty ................................................................................................................................. 3 Data provided by the client .......................................................................................................... 4 Usage of samples ....................................................................................................................... 4 Test sample description .............................................................................................................. 5 Identification of the client............................................................................................................. 6 Testing period and place ............................................................................................................. 6 Document history ........................................................................................................................ 6 Environmental conditions ............................................................................................................ 7 Remarks and comments ............................................................................................................. 8 Testing verdicts ........................................................................................................................... 8 Summary .................................................................................................................................... 8 List of equipment used during the test......................................................................................... 9 Appendix A: Test Results for LTE FCC Part 27/ IC RSS-199 .................................................... 10 Appendix B: Test Results for 3G FCC Part 27/ IC RSS-199 .................................................... 385 Report No: 2370ERM.004 Page 2 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Competences and guarantees DEKRA Certification Inc. is a testing laboratory accredited by A2LA (The American Association for Laboratory Accreditation), to perform the tests indicated in the Certificate 2764.01. DEKRA Certification Inc. is a testing laboratory competent to carry out the tests described in this report. To assure the traceability to other national and international laboratories, DEKRA Certification Inc. has a calibration and maintenance program for its measurement equipment. DEKRA Certification Inc. guarantees the reliability of the data presented in this report, which is the result of the measurements and the tests performed to the item under test on the date and under the conditions stated on the report and, it is based on the knowledge and technical facilities available at DEKRA Certification at the time of performance of the test. DEKRA Certification Inc. is liable to the client for the maintenance of the confidentiality of all information related to the item under test and the results of the test. The results presented in this Test Report apply only to the item under test established in this document. IMPORTANT: No parts of this report may be reproduced or quoted out of context, in any form or by any means, except in full, without the previous written permission of DEKRA Certification Inc. General conditions 1. This report is only referred to the item that has undergone the test. 2. This report does not constitute or imply on its own an approval of the product by the Certification Bodies or competent Authorities. 3. This document is only valid if complete; no partial reproduction can be made without previous written permission of DEKRA Certification Inc. 4. This test report cannot be used partially or in full for publicity and/or promotional purposes without previous written permission of DEKRA Certification Inc. and the Accreditation Bodies. Uncertainty Uncertainty (factor k=2) was calculated according to the DEKRA Certification internal document PODT000. Frequency

(MHz) 30-180 180-1000 1000-18000 18000-40000 U(k=2) Units 3.82 2.61 2.92 2.15 dB dB dB dB Report No: 2370ERM.004 Page 3 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Data provided by the client Module supporting LTE, WCDMA and GSM Cellular Technologies. DEKRA declines any responsibility with respect to the information provided by the client and that may affect the validity of results. Usage of samples Samples undergoing test have been selected by: The client. Sample S/01 is composed of the following elements:

Control N Description Model Serial N Date of reception 2370.07 CAT 11 Module Designation NA WT50NA02 015433000004487 5/21/2019 2370.03 Antenna_LTE dipole SPDA24700/2700 2370.04 Antenna_LTE dipole SPDA24700/2700 2370.05 Power cable

-

-

-

-

5/08/2019 5/08/2019 5/08/2019 1. Sample S/01 was used for the following test(s):. All conducted and radiated tests indicated in appendix A. Report No: 2370ERM.004 Page 4 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Test sample description Ports. :

Supplementary information to the ports. :

Rated power supply .................... :

Port name and description Specified Attached during Shielded Cable length

[m]

test Reference poles L1 L2 L3 N PE No Data Provided No Data Provided Voltage and Frequency AC: 230Vac / 50Hz. AC:

DC:13.4 V DC:

Rated Power ............................... :

No Data Provided Clock frequencies ....................... :

No Data Provided Other parameters ........................ :

No Data Provided Software version ......................... :

OTP_2.48 Hardware version ........................ :

P3 Dimensions in cm (L x W x D) .... :

No Data Provided Mounting position ........................ :

Table top equipment Wall/Ceiling mounted equipment Floor standing equipment Hand-held equipment Other:

Modules/parts ............................. :

Module/parts of test item Type Manufacturer No Data provided Report No: 2370ERM.004 Page 5 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Accessories (not part of the test item) ............................................ :

Documents as provided by the applicant ...................................... :

Description Type Description File name Manufacturer Issue date Equipment FDT30_15_Declaration_Equipment_ 2019-06-17 declaration data Data_Continental_WT50NA02_sign ed Copy of marking plate:

Identification of the client Continental Automotive Systems, Inc. 21440 W. Lake Cook Rd, Deer Park, IL 60010, U.S.A. Testing period and place Test Location DEKRA Certification, Inc. Date (start) 05-22-2019 Date (finish) 06-06-2019 Document history Report number Date Description 2370ERM.004 06-25-2019 First release Report No: 2370ERM.004 Page 6 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Environmental conditions In the control chamber, the following limits were not exceeded during the test:

Temperature Relative humidity Air pressure Min. = 15 C Max. = 35 C Min. = 30 %

Max. = 75 %

Min. = 860 mbar Max. = 1060 mbar In the semi anechoic chamber, the following limits were not exceeded during the test. Temperature Relative humidity Air pressure Min. = 15 C Max. = 35 C Min. = 30 %

Max. = 75 %

Min. = 860 mbar Max. = 1060 mbar In the chamber for conducted measurements, the following limits were not exceeded during the test:

Temperature Relative humidity Air pressure Min. = 15 C Max. = 35 C Min. = 30 %

Max. = 60 %

Min. = 860 mbar Max. = 1060 mbar Report No: 2370ERM.004 Page 7 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Remarks and comments The tests have been performed by the technical personnel: Sravani Gollamudi, Koji Nishimoto, and Poojita Bhattu. Testing verdicts Not applicable :

Pass Fail

:

:

Not measured :

N/A P F N/M Summary Report Section FCC Spec Clause A.1 A.2 A.3 2.1046 and 27.50 2.1047 and 27.50 2.1055 and 27.54 FCC PART 27 /IC RSS-199 PARAGRAPH RSS Spec Clause Test Description Verdict Remark RSS-199 Clause 4.4 RF Output power RSS-199 Clause 4.1 Modulation characteristics RSS-199 Clause 4.3 Frequency stability A.4 2.1049 RSS-199 Clause 4.2 Occupied Bandwidth A.5 2.1051 and 27.53 RSS-199 Clause 4.5 Spurious emissions at antenna terminals A.6 27.53 RSS-199 Clause 4.5 Spurious emissions at antenna terminals at Block edges A.7 2.1053 and 27.53 RSS-199 Clause 4.5 Radiated emissions Supplementary information and remarks:

N/A P P P P P P P N/A N/A N/A N/A N/A N/A N/A Report No: 2370ERM.004 Page 8 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America List of equipment used during the test Conducted Measurements CONTROL NUMBER DESCRIPTION LAST NEXT CALIBRATION CALIBRATION 1039 Signal analyzer Rohde & Schwarz FSV40 2018/10 2020/10 1149 Wideband Radio Communication Tester Rohde & Schwarz CMW 500 2018/07 2020/07 1041 EMI Test Receiver Rohde & Schwarz ESR 7 2017/04 2019/08 101 Climatic chamber Espec 2019/10 2020/10 Radiated Measurements CONTROL NUMBER DESCRIPTION LAST NEXT CALIBRATION CALIBRATION 1179 1064 1057 1056 1012 Semi anechoic Absorber Lined Chamber Frankonia SAC 3 plus L N/A N/A BiconicalLog antenna ETS LINDGREN 3142E 2017/03 2020/03 Double-ridge Waveguide Horn antenna 1-18 GHz 2017/03 2020/03 Double-ridge Waveguide Horn antenna 18-

40 GHz 2016/12 2019/12 Spectrum analyzer Rohde & Schwarz ESR26 2018/09 2020/09 1039 Spectrum analyzer Rohde & Schwarz FSV40 2018/10 2020/10 1015,1017, 1019, 1020 Rohde & Schwarz EMC32 software N/A N/A Report No: 2370ERM.004 Page 9 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Appendix A: Test Results for LTE FCC Part 27/ IC RSS-199 Report No: 2370ERM.004 Page 10 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America Appendix A Content PRODUCT INFORMATION ...................................................................................................... 12 DESCRIPTION OF TEST CONDITIONS .................................................................................. 13 TEST A.1: RF OUTPUT POWER .............................................................................................. 18 TEST A.2: MODULATION CHARACTERISTICS .................................................................... 110 TEST A.3: FREQUENCY STABILITY ..................................................................................... 112 TEST A.4: OCCUPIED BANDWIDTH ..................................................................................... 118 TEST A.5: SPURIOUS EMISSIONS AT ANTENNA TERMINALS ........................................... 256 TEST A.6: SPURIOUS EMISSIONS AT ANTENNA TERMINALS AT BLOCK EDGES ........... 298 TEST A.7: RADIATED EMISSIONS ........................................................................................ 348 Report No: 2370ERM.004 Page 11 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America PRODUCT INFORMATION The following information is provided by the client Information Modulation Maximum RF Output Power Operation mode:

- Operating Frequency Range

- Nominal Channel Bandwidth Extreme operating conditions

- Temperature range Antenna type Antenna gain Nominal Voltage

- Supply Voltage Description QPSK, QAM 23 dBm LTE Band 4: 1710 1755MHz LTE Band 7: 2500 2570MHz LTE Band 12: 699 716MHz LTE Band 13: 777 787MHz LTE Band 66: 1710 1780MHz LTE Band 4: 1.4 / 3 / 5/ 10/ 15/ 20 MHz LTE Band 7: 5 / 10 / 15 / 20 MHz LTE Band 12: 1.4 / 3 / 5 / 10 MHz LTE Band 13: 5 / 10 MHz LTE Band 66: 1.4 / 3 / 5/ 10/ 15/ 20 MHz Tnom = +15 to + 35 Tmin = -30 Tmax = +50 External Antenna. 2 dBi 12 Vdc

- Type of power source DC voltage from power supply. Report No: 2370ERM.004 Page 12 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America DESCRIPTION OF TEST CONDITIONS The worst case was found when positioned as the table below. Following channel(s) was (were selected for the final test as listed below:

TEST CONDITIONS DESCRIPTION Power supply (V):

Vnominal = 12 Vdc Test Frequencies for Conducted tests:

1.4 MHz Bandwidth:

-Lowest Channel: 19957(1710.7 MHz)

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 20393(1754.3 MHz) 3 MHz Bandwidth:

-Lowest Channel: 19965(1711.5 MHz)

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 20375(1752.5 MHz) 5 MHz Bandwidth:

-Lowest Channel: 19975(1712.5 MHz

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 19175(1907.5 MHz) 10 MHz Bandwidth:

-Lowest Channel: 20000(1715 MHz)

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 20350(1750 MHz) 15 MHz Bandwidth:

-Lowest Channel: 20025(1717.5 MHz)

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 20325(1747.5 MHz) 20 MHz Bandwidth:

-Lowest Channel: 20050(1720 MHz)

-Middle Channel: 20175(1732.5 MHz)

-Highest Channel: 20300(1745 MHz) Test Frequencies for Radiated tests:

TC#01 LTE Band 4 Available Frequencies Frequency Bandwidth Tested Channel Modulation Mode 1710 to 1755 MHz 1717.5 MHz 1732.5 MHz 1747.5 MHz 15 MHz QPSK 1 RB Report No: 2370ERM.004 Page 13 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST CONDITIONS DESCRIPTION Power supply (V):

Vnominal = 12 Vdc Test Frequencies for Conducted tests:

5 MHz Bandwidth:

-Lowest Channel: 20775 (2502.5 MHZ)

-Middle Channel: 21100 (2535.0 MHz)

-Highest Channel: 21425 (2567.5 MHz) 10 MHz Bandwidth:

-Lowest Channel: 20800 (2505.0 MHZ)

-Middle Channel: 21100 (2535.0 MHz)

-Highest Channel: 21400 (2565.0 MHz) 15 MHz Bandwidth:

-Lowest Channel: 20825 (2507.5 MHZ) TC#02

-Middle Channel: 21100 (2535.0 MHz) LTE Band 7

-Highest Channel: 21375 (2562.5 MHz) 20 MHz Bandwidth:

-Lowest Channel: 20850 (2510.0 MHZ)

-Middle Channel: 21100 (2535.0 MHz)

-Highest Channel:21350 (2560.0 MHz) Test Frequencies for Radiated tests:

Available Frequencies Frequency Bandwidth Tested Channel Modulation Mode 2510 MHz 2570 to 2610 MHz 2535 MHz 20 MHz QPSK 1 RB 2560 MHz Note: This device was tested under all bandwidths, RB configurations and modulations. The worst case found in QPSK modulation. Report No: 2370ERM.004 Page 14 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST CONDITIONS DESCRIPTION Power supply (V):

Vnominal = 12 Vdc Test Frequencies for Conducted tests:

1.4 MHz Bandwidth:

-Lowest Channel: 23017(699.7 MHZ)

-Middle Channel: 23095(707.5 MHz)

-Highest Channel: 23173(715.3 MHz) 3 MHz Bandwidth:

-Lowest Channel: 23025(700.5 MHZ)

-Middle Channel: 23095(707.5 MHz)

-Highest Channel: 23165(714.5 MHz) 5 MHz Bandwidth:

-Lowest Channel: 23035(701.5 MHZ)

-Middle Channel: 23095(707.5 MHz)

-Highest Channel: 23155(713.5 MHz) 10 MHz Bandwidth:

-Lowest Channel: 23060(704 MHZ)

-Middle Channel: 23095(707.5 MHz)

-Highest Channel: 23130(711 MHz) Test Frequencies for Radiated tests:

TC#03 LTE Band 12 Available Frequencies Frequency Bandwidth Tested Channel Modulation Mode 699 to 710 MHz 701.5 MHz 707.5 MHz 713.5 MHz 5 MHz QPSK 1 RB Note: This device was tested under all bandwidths, RB configurations and modulations. The worst case found in QPSK modulation. Report No: 2370ERM.004 Page 15 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST CONDITIONS DESCRIPTION Power supply (V):

Vnominal = 12 Vdc Test Frequencies for Conducted tests:

5 MHz Bandwidth:

-Lowest Channel: 23205 (779.5 MHZ)

-Middle Channel: 23230 (782.0 MHz)

-Highest Channel: 23255 (784.5 MHz) 10 MHz Bandwidth:

-Middle Channel: 23230 (782.0 MHz) TC#04 Test Frequencies for Radiated tests:

LTE Band 13 Tested Channel Available Frequencies Frequency Bandwidth Modulation Mode 779.5 MHz 2570 to 2610 MHz 782 MHz 5 MHz QPSK 1 RB 784.5 MHz Note: This device was tested under all bandwidths, RB configurations and modulations. The worst case found in QPSK modulation. Report No: 2370ERM.004 Page 16 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST CONDITIONS DESCRIPTION Power supply (V):

Vnominal = 12 Vdc Test Frequencies for Conducted tests:

1.4 MHz Bandwidth:

-Lowest Channel: 131979(1710.7 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132665(1779.3 MHz) 3 MHz Bandwidth:

-Lowest Channel: 131987(1711.5 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132657(1778.5 MHz) 5 MHz Bandwidth:

-Lowest Channel: 131997(1712.5 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132647(1777.5 MHz) 10 MHz Bandwidth:

-Lowest Channel: 132022(1715 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132622(1775 MHz) 15 MHz Bandwidth:

-Lowest Channel: 132047(1717.5 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132597(1772.5 MHz) 20 MHz Bandwidth:

-Lowest Channel: 132072(1720 MHz)

-Middle Channel: 132422(1755 MHz)

-Highest Channel: 132572(1770 MHz) Test Frequencies for Radiated tests:

TC#05 LTE Band 66 Available Frequencies Frequency Bandwidth Tested Channel Modulation Mode 1850 to 1915 MHz 1717.5 MHz 1755 MHz 1772.5 MHz 15 MHz QPSK 1 RB Report No: 2370ERM.004 Page 17 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST A.1: RF OUTPUT POWER LIMITS:

LIMITS Product standard:

FCC Part 27 / IC RSS-199 Test standard:

FCC 2.1046 and 27.50 / RSS-199 Clause 4.4 Fixed. mobile. and portable (hand-held) stations operating in the band are limited to 1-watt EIRP (30 dBm). Fixed stations operating in the band are limited to a maximum antenna height of 10 meters above ground. Mobile and portable stations operating in these bands must employ a means for limiting power to the minimum necessary for successful communications. The peak-to-average ratio (PAR) of the transmission shall not exceed 13 dB. RSS-199 Clause 6.5 The equivalent isotropically radiated power (e.i.r.p.) for mobile and portable transmitters shall not exceed two watts. The peak-to-average power ratio (PAPR) of the transmission shall not exceed 13 dB. TEST SETUP:

Report No: 2370ERM.004 Page 18 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

S/01 TESTED CONDITIONS MODES:

TC#01 (Band 4) TEST RESULTS:

PASS LTE QPSK AND 16QAM MODULATION. Bandwidth = 1.4 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.41 22.37 22.4 2.0 2.0 2.0 24.41 24.37 24.4 5.07 5.07 5.36 LTE QPSK AND 16QAM MODULATION. Bandwidth = 3 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.4 22.37 22.42 2.0 2.0 2.0 24.4 24.37 24.42 5.04 5.07 5.30 LTE QPSK AND 16QAM MODULATION. Bandwidth = 5 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.51 22.44 22.45 2.0 2.0 2.0 24.51 24.44 24.45 5.10 4.81 5.25 LTE QPSK AND 16QAM MODULATION. Bandwidth = 10 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.48 22.45 22.47 2.0 2.0 2.0 24.48 24.45 24.47 5.16 4.84 5.22 LTE QPSK AND 16QAM MODULATION. Bandwidth = 15 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.52 22.51 22.59 2.0 2.0 2.0 24.52 24.51 24.59 5.04 4.75 4.99 LTE QPSK AND 16QAM MODULATION. Bandwidth = 20 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.59 22.55 22.52 2.0 2.0 2.0 24.59 24.55 24.52 5.01 5.04 4.99 Measurement uncertainty (dB)

<0.95 Report No: 2370ERM.004 Page 19 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth

(MHz) Channel Location Frequency (MHz) Channel Number Modulation Resource Resource Block Size Block Offset Average power at antenna port

(dBm) PAPR

(dB) Lowest (19957

(1710.7 MHz)) 1.4 Middle (20175

(1732.5 MHz)) Highest (20393

(1754.3 MHz)) QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 1 1 3 3 6 0 5 0 2 0 0 5 0 2 0 0 5 0 2 0 0 5 0 2 0 0 5 0 2 0 0 5 0 2 0 22.33 22.38 22.37 22.41 21.39 21.75 21.74 21.48 21.49 20.41 22.3 22.31 22.33 22.37 21.33 21.39 21.47 21.42 21.46 20.37 22.36 22.39 22.35 22.4 21.35 21.6 21.47 21.41 21.49 20.41 4.32 5.07 4.23 5.07 4.52 5.36 Report No: 2370ERM.004 Page 20 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth

(MHz) Channel Location Frequency (MHz) Channel Number Modulation Resource Resource Block Size Block Offset Average power at antenna port

(dBm) PAPR

(dB) Lowest (19965

(1711.5 MHz)) 3 Middle (20175

(1732.5 MHz)) Highest (20385

(1753.5 MHz)) QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 8 8 15 1 1 8 8 15 1 1 8 8 15 1 1 8 8 15 1 1 8 8 15 1 1 8 8 15 0 14 0 7 0 0 14 0 7 0 0 14 0 7 0 0 14 0 7 0 0 14 0 7 0 0 14 0 7 0 22.4 22.37 21.48 21.45 21.48 21.61 21.6 20.57 20.56 20.48 22.37 22.34 21.36 21.41 21.39 21.62 21.5 20.47 20.46 20.37 22.42 22.4 21.39 21.45 21.42 21.66 21.67 20.48 20.48 20.45 4.20 5.04 4.06 5.07 4.46 5.30 Report No: 2370ERM.004 Page 21 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth

(MHz) Channel Location Frequency (MHz) Channel Number Modulation Resource Resource Block Size Block Offset Average power at antenna port

(dBm) PAPR

(dB) Lowest (19975

(1712.5 MHz)) Middle (20175 5

(1732.5 MHz)) Highest (20375

(1752.5 MHz)) 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 22.51 22.44 22.47 21.49 21.48 21.49 21.67 21.56 21.53 20.48 20.56 20.52 22.43 22.37 22.44 21.42 21.4 21.42 21.55 21.46 21.53 20.4 20.44 20.42 22.43 22.43 22.45 21.43 21.42 21.42 21.64 21.67 21.7 20.47 20.45 20.47 4.17 5.10 4.06 4.81 4.38 5.25 Report No: 2370ERM.004 Page 22 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

BANDWIDTH CHANNEL

(MHz) FREQUENCY (MHz) MODULATION RB SIZE Lowest (20000

(1715 MHz)) 10 Middle (20175

(1732.5 MHz)) Highest (20350

(1750 MHz)) QPSK 16-QAM QPSK 16-QAM QPSK 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 16-QAM 25 25 50 RB AVERAGE POWER OFFSET 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0

(dBm) 22.47 22.4 22.48 21.51 21.53 21.51 21.69 21.65 21.57 20.56 20.55 20.53 22.45 22.38 22.44 21.46 21.43 21.44 21.52 21.62 21.63 20.45 20.48 20.47 22.47 22.4 22.46 21.42 21.47 21.44 21.49 21.58 21.61 20.45 20.44 20.47 PAPR

(dB) 4.14 5.16 4.09 4.84 4.17 5.22 Report No: 2370ERM.004 Page 23 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

BANDWIDTH CHANNEL

(MHz) FREQUENCY (MHz) MODULATION RB SIZE RB AVERAGE OFFSET POWER (dBm) PAPR (dB) Lowest (20025

(1717.5 MHz)) 15 Middle (20175

(1732.5 MHz)) Highest (20325

(1747.5 MHz)) QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 1 36 36 75 1 1 1 36 36 75 1 1 1 36 36 75 1 1 1 36 36 75 1 1 1 36 36 75 1 1 1 36 36 75 0 37 74 0 37 0 0 37 74 0 37 0 0 37 74 0 37 0 0 37 74 0 37 0 0 37 74 0 37 0 0 37 74 0 37 0 22.52 22.38 22.44 21.53 21.42 21.54 21.7 21.7 21.74 20.55 20.41 20.58 22.51 22.4 22.5 21.44 21.45 21.46 21.66 21.53 21.69 20.5 20.51 20.44 22.59 22.35 22.53 21.46 21.43 21.43 21.82 21.61 21.68 20.43 20.46 20.48 4.12 5.04 4.00 4.75 4.03 4.99 Report No: 2370ERM.004 Page 24 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

BANDWIDTH CHANNEL

(MHz) FREQUENCY (MHz) 20 Lowest (20050

(1720 MHz)) Middle (20175

(1732.5 MHz)) Highest (20300

(1745 MHz)) MODULATION RB SIZE RB OFFSET QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 1 1 1 50 50 100 1 1 1 50 50 100 1 1 1 50 50 100 1 1 1 50 50 100 1 1 1 50 50 100 1 1 1 50 50 100 0 49 99 0 49 0 0 49 99 0 49 0 0 49 99 0 49 0 0 49 99 0 49 0 0 49 99 0 49 0 0 49 99 0 49 0 AVERAGE POWER

(dBm) 22.59 22.38 22.41 21.59 21.41 21.56 21.72 21.66 21.6 20.62 20.43 20.55 22.47 22.37 22.55 21.46 21.49 21.45 21.66 21.53 21.76 20.51 20.47 20.49 22.48 22.38 22.52 21.54 21.49 21.45 21.78 21.55 21.71 20.53 20.47 20.47 PAPR (dB) 4.12 5.01 4.14 5.04 4.00 4.99 Report No: 2370ERM.004 Page 25 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

PAPR Bandwidth = 1.4 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 26 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel PAPR Bandwidth = 1.4 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 27 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 28 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

PAPR Bandwidth = 3 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 29 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel PAPR Bandwidth = 3 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 30 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 31 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

PAPR Bandwidth = 5 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 32 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel Bandwidth = 5 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 33 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 34 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth = 10 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 35 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel Bandwidth = 10 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 36 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 37 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

PAPR Bandwidth = 15 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 38 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel Bandwidth = 15 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 39 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 40 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth = 20 MHz. Modulation QPSK. RB Size: 1. RB Offset: 0. Lowest channel Middle channel Report No: 2370ERM.004 Page 41 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Highest channel Bandwidth = 20 MHz. Modulation 16QAM. RB Size: 1. RB Offset: 0. Lowest channel Report No: 2370ERM.004 Page 42 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Middle channel Highest channel Report No: 2370ERM.004 Page 43 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TESTED SAMPLES:

S/01 TESTED CONDITIONS MODES:

TC#02 (Band 7) TEST RESULTS:

PASS LTE QPSK AND 16QAM MODULATION. Bandwidth = 5 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.22 22.17 21.97 2.0 2.0 2.0 24.22 24.17 23.97 5.28 5.33 5.22 LTE QPSK AND 16QAM MODULATION. Bandwidth = 10 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.25 22.21 22.10 2.0 2.0 2.0 24.25 24.21 24.10 5.13 5.19 5.25 LTE QPSK AND 16QAM MODULATION. Bandwidth = 15 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.28 22.24 22.16 2.0 2.0 2.0 24.28 24.24 24.16 5.13 5.13 5.16 LTE QPSK AND 16QAM MODULATION. Bandwidth = 20 MHz Channel Lowest Middle Highest Average power at antenna port (dBm) Maximum declared antenna gain (dBi) Maximum E.I.R.P. PAPR (dB) average power (dBm) 22.30 22.28 22.19 2.0 2.0 2.0 24.30 24.28 24.19 5.10 5.07 5.13 Measurement uncertainty (dB)

<0.95 Report No: 2370ERM.004 Page 44 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

Bandwidth

(MHz) Channel Location Frequency (MHz) Channel Number Modulation Resource Resource Block Size Block Offset Average power at antenna port

(dBm) PAPR

(dB) Lowest (20775

(2502.5 MHz)) 5 Middle (21100

(2535 MHz)) Highest (24125

(2567.5 MHz)) 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 1 1 1 12 12 25 QPSK 16-QAM QPSK 16-QAM QPSK 16-QAM 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 0 12 24 0 11 0 22.22 22.21 22.18 21.26 21.24 21.23 21.45 21.32 21.28 20.27 20.25 20.25 22.17 22.11 22.03 21.17 21.14 21.1 21.27 21.31 21.26 20.18 20.18 20.16 21.97 21.95 21.96 21.05 20.99 21.01 21.28 21.38 21.27 20.05 20.05 20.05 4.41 5.28 4.43 5.33 4.38 5.22 Report No: 2370ERM.004 Page 45 of 414 06-18-2019 DEKRA Certification, Inc. 405 Glenn Dr. Suite 12, Sterling, VA 20164 United States of America TEST RESULTS (Cont):

BANDWIDTH CHANNEL

(MHz) FREQUENCY (MHz) MODULATION RB SIZE Lowest (20800

(2505 MHz)) 10 Middle (21100

(2535 MHz)) Highest (21400

(2565 MHz)) QPSK 16-QAM QPSK 16-QAM QPSK 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 25 25 50 1 1 1 16-QAM 25 25 50 RB AVERAGE POWER OFFSET 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0 0 24 49 0 24 0

(dBm) 22.25 22.16 22.12 21.27 21.19 21.26 21.51 21.41 21.43 20.29 20.27 20.26 22.21 22.1 22.1 21.14 21.11 21.16 21.46 21.24 21.31 20.15 20.12 20.15 22.1 22.04 22.03 21.04 21.03 21.07 21.38 21.2 21.14 20.1 20.06 20.09 PAPR

(dB) 4.35 5.13 4.32 5.19 4.43 5.25 Report No: 2370ERM.004 Page 46 of 414 06-18-2019