| submitted / available | |||||||
|---|---|---|---|---|---|---|---|
|
|
Host UM | Users Manual | 527.72 KiB | February 17 2022 | |||
|
|
User Manual variant model G12N400G1 | Users Manual | 536.53 KiB | August 16 2022 / February 13 2023 | delayed release | ||
|
|
User Manual variant model G12N400G1 BT1 BV1 v1 | Users Manual | 538.75 KiB | March 10 2023 / September 13 2023 | delayed release | ||
|
|
User Manual variant model G12N400G1 C1YC2 C1YG2 v1 | Users Manual | 538.37 KiB | June 04 2023 / December 04 2023 | delayed release | ||
|
|
User Manual variant model G12N410G1 G12N410M1 Molex 848358 v1 | Users Manual | 540.57 KiB | June 30 2023 / December 31 2023 | delayed release | ||
|
|
IntPho | Internal Photos | 1.47 MiB | March 10 2023 / September 13 2023 | delayed release | ||
|
|
Internal Photos | Internal Photos | 1.04 MiB | May 26 2021 / June 02 2021 | |||
|
|
IntPho 1 r1 | Internal Photos | 4.78 MiB | January 21 2022 / January 25 2022 | |||
|
|
IntPho 2 r1 | Internal Photos | 2.18 MiB | January 21 2022 / January 25 2022 | |||
|
|
EP260854-02 R01 FCC | External Photos | 922.07 KiB | June 04 2023 / December 04 2023 | delayed release | ||
|
|
ExtPho | External Photos | 1000.71 KiB | June 30 2023 / December 31 2023 | delayed release | ||
|
|
ExtPho | External Photos | 1.18 MiB | February 17 2022 | |||
|
|
ExtPho r1 | External Photos | 1.51 MiB | January 21 2022 / January 25 2022 | |||
| ID Label/Location Info | June 04 2023 / June 06 2023 | ||||||
| ID Label/Location Info | June 04 2023 / June 06 2023 | ||||||
| Antenna 4G model-84835853 & 85660744 Molex v1 | Operational Description | June 30 2023 | confidential | ||||
| Attestation Statements | June 30 2023 / July 03 2023 | ||||||
|
|
FCC SAR Appendix A | RF Exposure Info | 836.93 KiB | June 30 2023 / July 03 2023 | |||
|
|
FCC SAR Appendix B | RF Exposure Info | 934.21 KiB | June 30 2023 / July 03 2023 | |||
|
|
FCC SAR Appendix C 1 | RF Exposure Info | 4.91 MiB | June 30 2023 / July 03 2023 | |||
|
|
FCC SAR Appendix C 2 | RF Exposure Info | 1.64 MiB | June 30 2023 / July 03 2023 | |||
|
|
FCC SAR Appendix D (photo) | Test Setup Photos | 60.17 KiB | June 30 2023 / December 31 2023 | delayed release | ||
|
|
FCC SAR r1 | RF Exposure Info | 1.31 MiB | June 30 2023 / July 03 2023 | |||
| Tune-Up Procedure May-11-2021 | Parts List/Tune Up Info | June 30 2023 | confidential | ||||
| Cover Letter(s) | June 30 2023 / July 03 2023 | ||||||
| Cover Letter(s) | June 30 2023 / July 03 2023 | ||||||
| Cover Letter(s) | June 30 2023 / July 03 2023 | ||||||
| Attestation Statements | June 30 2023 / July 03 2023 | ||||||
|
|
attestation US Agent r1 | Attestation Statements | 202.34 KiB | September 13 2023 / July 03 2023 | |||
| Attestation Statements | June 04 2023 / June 06 2023 | ||||||
| RF Exposure Info | June 04 2023 / June 06 2023 | ||||||
|
|
FA260854-02 R01 FCC SAR Appendix A | RF Exposure Info | 423.22 KiB | June 04 2023 / June 06 2023 | |||
|
|
FA260854-02 R01 FCC SAR Appendix B | RF Exposure Info | 917.65 KiB | June 04 2023 / June 06 2023 | |||
|
|
FA260854-02 R01 FCC SAR Appendix C | RF Exposure Info | 5.06 MiB | June 04 2023 / June 06 2023 | |||
|
|
FA260854-02 R01 FCC SAR Appendix D (photo | Test Setup Photos | 40.75 KiB | June 04 2023 / December 04 2023 | delayed release | ||
|
|
FA260854-02 R01 FCC SAR r1 | RF Exposure Info | 1.50 MiB | June 07 2023 / June 06 2023 | |||
|
|
FA260854-02 R01 FCC SAR r2 | RF Exposure Info | 1.21 MiB | June 09 2023 / June 06 2023 | |||
| 2807E-FE4NA0210 Tune-Up Procedure May-11-2021 | Parts List/Tune Up Info | June 04 2023 | confidential | ||||
|
|
Attestation Covered List 20230529 | Attestation Statements | 131.35 KiB | June 04 2023 / June 06 2023 | |||
|
|
cvrltr FCC Class II Permissive Change 20230529 | Cover Letter(s) | 162.77 KiB | June 04 2023 / June 06 2023 | |||
|
|
cvrltr FCC Confidentiality Request 20230529 | Cover Letter(s) | 146.47 KiB | June 04 2023 / June 06 2023 | |||
| Operational Description variant model G12N400G1 BT1 BV1 C1YC2 C1YG2 v1 | Operational Description | June 04 2023 | confidential | ||||
| Antenna (External) | Operational Description | March 10 2023 | confidential | ||||
| Test Report | March 10 2023 / March 16 2023 | ||||||
|
|
Tsup JBP, CXX | Test Setup Photos | 231.46 KiB | March 10 2023 / September 13 2023 | delayed release | ||
| Attestation Statements | March 10 2023 / March 16 2023 | ||||||
| Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
| Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
| Cover Letter(s) | March 10 2023 / March 16 2023 | ||||||
| Attestation Statements | March 10 2023 / March 16 2023 | ||||||
| OpDes Antenna specification TCP model G12N400G1 internal antennas v3 | Operational Description | March 10 2023 | confidential | ||||
| Operational Description variant model G12N400G1 BT1 BV1 v1 | Operational Description | March 10 2023 | confidential | ||||
|
|
FCC MPE | RF Exposure Info | 264.97 KiB | March 10 2023 / March 16 2023 | |||
|
|
FCC SAR | RF Exposure Info | 882.29 KiB | March 10 2023 / March 16 2023 | |||
|
|
FCC SAR Appendix C | RF Exposure Info | 3.40 MiB | March 10 2023 / March 16 2023 | |||
|
|
FCC SAR Appendix D (photo | Test Setup Photos | 46.42 KiB | March 10 2023 / September 13 2023 | delayed release | ||
|
|
TR PCB LTE | Test Report | 1021.67 KiB | March 10 2023 / March 16 2023 | |||
|
|
TR PCB LTE B14 | Test Report | 886.75 KiB | March 10 2023 / March 16 2023 | |||
|
|
TR PCB WCDMA | Test Report | 823.28 KiB | March 10 2023 / March 16 2023 | |||
|
|
Tsup PCB LTE | Test Setup Photos | 732.81 KiB | March 10 2023 / September 13 2023 | delayed release | ||
|
|
Tsup PCB LTE B14 | Test Setup Photos | 393.38 KiB | March 10 2023 / September 13 2023 | delayed release | ||
|
|
Tsup PCB WCDMA | Test Setup Photos | 454.77 KiB | March 10 2023 / September 13 2023 | delayed release | ||
| Test Report | August 16 2022 | ||||||
| Cover Letter(s) | August 16 2022 | ||||||
| Cover Letter(s) | August 16 2022 | ||||||
| OpDes External antenna | Operational Description | August 16 2022 | confidential | ||||
| Operational Description variant model G12N400G1 v4 | Operational Description | August 16 2022 | confidential | ||||
|
|
FCC MPE r1 | RF Exposure Info | 254.05 KiB | August 16 2022 | |||
|
|
FCC SAR A | RF Exposure Info | 806.77 KiB | August 16 2022 | |||
|
|
FCC SAR B | RF Exposure Info | 1.41 MiB | August 16 2022 | |||
|
|
FCC SAR C | RF Exposure Info | 4.87 MiB | August 16 2022 | |||
|
|
TR PCB LTE B14 r1 | Test Report | 760.22 KiB | August 16 2022 | |||
|
|
TR PCB LTE r1 | Test Report | 1.02 MiB | August 16 2022 | |||
|
|
TR PCB WCDMA r1 | Test Report | 848.30 KiB | August 16 2022 | |||
|
|
Tsup FCC SAR | Test Setup Photos | 35.61 KiB | August 16 2022 / February 13 2023 | delayed release | ||
| OpDes Inquiry History | Operational Description | August 16 2022 | confidential | ||||
| OpDes Inquiry History KDB material v2 | Operational Description | August 16 2022 | confidential | ||||
| OpDes Inquiry History comment reply | Operational Description | August 16 2022 | confidential | ||||
| OpDes Inquiry History comment reply v2 | Operational Description | August 16 2022 | confidential | ||||
|
|
Power of Attorney Letter | Attestation Statements | 122.77 KiB | February 17 2022 | |||
| OpDes Antenna | Operational Description | February 17 2022 | confidential | ||||
| TunePro | Parts List/Tune Up Info | February 17 2022 | confidential | ||||
|
|
MPE r1 | RF Exposure Info | 425.22 KiB | February 17 2022 | |||
|
|
TR PCB LTE B14 r1 | Test Report | 471.43 KiB | February 17 2022 | |||
|
|
TR PCB LTE r1 | Test Report | 832.78 KiB | February 17 2022 | |||
|
|
TR PCB WCDMA r1 | Test Report | 671.89 KiB | February 17 2022 | |||
|
|
TR JBP, CXX r1 | Test Report | 494.27 KiB | January 21 2022 / January 25 2022 | |||
| OpDes Antenna 1 | Operational Description | January 21 2022 | confidential | ||||
| OpDes Antenna 2 | Operational Description | January 21 2022 | confidential | ||||
|
|
FCC MPE r1 | RF Exposure Info | 428.05 KiB | January 21 2022 / January 25 2022 | |||
|
|
C2PC Cover Letter | Cover Letter(s) | 141.22 KiB | May 26 2021 / June 02 2021 | |||
|
|
Confidentiality Letter | Cover Letter(s) | 120.77 KiB | May 26 2021 / June 02 2021 | |||
| Op Desc Release note | Operational Description | May 26 2021 | confidential | ||||
|
|
Power of Attorney Letter | Cover Letter(s) | 123.00 KiB | May 26 2021 / June 02 2021 | |||
| Parts List | Parts List/Tune Up Info | May 26 2021 | confidential | ||||
| Schematics | Schematics | May 26 2021 | confidential | ||||
|
|
TR CXX | Test Report | 514.79 KiB | May 26 2021 / June 02 2021 | |||
| Test Report | May 26 2021 / June 02 2021 | ||||||
|
|
Tsup CXX | Test Setup Photos | 254.76 KiB | May 26 2021 / June 02 2021 | |||
| Test Setup Photos | May 26 2021 / June 02 2021 | ||||||
|
|
Class II Permissive Change | Cover Letter(s) | 142.35 KiB | May 19 2021 / May 21 2021 |
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2023-07-03 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | Class II permissive change or modification of presently authorized equipment |
| 2 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||
| 3 | JBP - Part 15 Class B Computing Device Peripheral | |||
| 4 | 2023-06-06 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | Class II Permissive Change |
| 5 | 2023-03-16 | JBP - Part 15 Class B Computing Device Peripheral | Class II permissive change or modification of presently authorized equipment | |
| 6 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | ||
| 7 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||
| 8 | 2022-08-16 | JBP - Part 15 Class B Computing Device Peripheral | Class II Permissive Change | |
| 9 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||
| 10 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | ||
| 11 | 2022-02-17 | JBP - Part 15 Class B Computing Device Peripheral | ||
| 12 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||
| 13 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | ||
| 14 | 2022-01-25 | JBP - Part 15 Class B Computing Device Peripheral | ||
| 15 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||
| 16 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | ||
| 17 | 2021-06-02 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | |
| 18 | JBP - Part 15 Class B Computing Device Peripheral | |||
| 19 | 2021-05-21 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | |
| 20 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter | ||
| 21 | JBP - Part 15 Class B Computing Device Peripheral | |||
| 22 | 2020-07-31 | 869 ~ 894 | CXX - Communications Rcvr for use w/ licensed Tx and CBs | Original Equipment |
| 23 | JBP - Part 15 Class B Computing Device Peripheral | |||
| 24 | 1860 ~ 1900 | PCB - PCS Licensed Transmitter |
| Applicant Information | ||||||
|---|---|---|---|---|---|---|
| Effective |
2023-07-03
|
|||||
|
2023-06-06
|
||||||
|
2023-03-16
|
||||||
|
2022-08-16
|
||||||
|
2022-02-17
|
||||||
|
2022-01-25
|
||||||
|
2021-06-02
|
||||||
|
2021-05-21
|
||||||
|
2020-07-31
|
||||||
| Applicant's complete, legal business name |
Continental Automotive Systems, Inc.
|
|||||
| FCC Registration Number (FRN) |
0015232887
|
|||||
| Physical Address |
21440 West Lake Cook Road
|
|||||
|
Deer Park, Illinois 60010
|
||||||
|
Deer Park, IL
|
||||||
|
United States
|
||||||
| TCB Information | ||||||
| TCB Application Email Address |
K******@sporton-usa.com
|
|||||
|
T******@TIMCOENGR.COM
|
||||||
|
t******@timcoengr.com
|
||||||
| TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|||||
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||||
| FCC ID | ||||||
| Grantee Code |
LHJ
|
|||||
| Equipment Product Code |
FE4NA0210
|
|||||
| Person at the applicant's address to receive grant or for contact | ||||||
| Name |
J******** Z********
|
|||||
| Telephone Number |
84786********
|
|||||
| Fax Number |
847-8********
|
|||||
|
J******@continental-corporation.com
|
||||||
| Technical Contact | ||||||
| Firm Name |
Sporton International Inc.
|
|||||
|
Sporton International Inc. Wensan Laboratory
|
||||||
| Name |
I**** C******
|
|||||
| Physical Address |
No.58, Aly. 75, Ln. 564 Wenhua 3rd Rd. Guishan Dis
|
|||||
|
No.58, Aly. 75, Ln. 564 Wenha 3rd Rd. Guishan Dist
|
||||||
|
Taoyuan, 333
|
||||||
|
Taoyuan
|
||||||
|
Taiwan
|
||||||
| Telephone Number |
886-3********
|
|||||
| Fax Number |
886-3********
|
|||||
|
i******@sporton.com.tw
|
||||||
| Non Technical Contact | ||||||
| n/a | ||||||
| Confidentiality (long or short term) | ||||||
| Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
| Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | |||||
| No | ||||||
| If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 12/31/2023 | |||||
| 12/04/2023 | ||||||
| 09/13/2023 | ||||||
| 02/13/2023 | ||||||
| 01/27/2021 | ||||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| Cognitive Radio & Software Defined Radio, Class, etc | ||||||
| Is this application for software defined/cognitive radio authorization? | No | |||||
| Equipment Class | PCB - PCS Licensed Transmitter | |||||
| CXX - Communications Rcvr for use w/ licensed Tx and CBs | ||||||
| JBP - Part 15 Class B Computing Device Peripheral | ||||||
| Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | FE4NA0210 | |||||
| FE4NA0110 | ||||||
| Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | |||||
| Modular Equipment Type | Single Modular Approval | |||||
| Limited Single Modular Approval | ||||||
| Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | |||||
| Class II Permissive Change | ||||||
| Original Equipment | ||||||
| Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | |||||
| Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | |||||
| Grant Comments | Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons. Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing. Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. The highest reported Body SAR is 0.74 W/kg. | |||||
| C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). Class II Permissive Change: Add the new antenna model for use as described in this filing. Class II Permissive Change: Add the new antenna model Molex 84835853 (85660744) and evaluate portable RF exposure condition on the Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1) as described in this filing. The antenna(s) used for this device must be installed to provide a separation distance of at least 25 mm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg. Class II Permissive Change: An additional SAR test was performed on antenna (Model: 85660742) at 2.5 cm separation distance. The highest reported SAR for use at the body transmission exposure condition is < 0.10 W/kg. | ||||||
| C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band. Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The internal antenna (Model: INTANT01) of this device has been tested for SAR measurement to demonstrate the compliance of portable RF exposure condition. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Evaluates new external antennas (Model: 85556753 and Model: 85660742) for the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 85556753 and Model: 85660742) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are < 0.10 W/kg. | ||||||
| C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band. Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: Enables portable use when integrated into the Continental TCP (Telematics Connectivity Platform), Model: G12N400G1. The external antennas (Model: 4G Hexband NA) use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The highest reported SAR for use at the body transmission exposure conditions are <0.10 W/kg. | ||||||
| C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). Class II Permissive Change: Add the new antenna model for use as described in this filing. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons. Class II Permissive Change: Add the new antenna model for use in mobile RF exposure category configuration as described in this filing. | ||||||
| C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. Class II Permissive Change: This change incorporates the subject approved module into a Continental TCU (Telematics Control Unit) (Model: G12N410G1 and G12N410M1). The antenna(s) used for this device must be installed to provide a separation distance of at least 20cm from all persons. | ||||||
| C2PC: Depopulated passive components from the RF front-end of the L2/L5 GNSS band. | ||||||
| C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. C2PC: (1) Hardware change: Baseband chipset GPIO Re-Mapped. (2) Hardware change: Shield frame footprint change. (3) Software change: update the supported carrier aggregation combination. | ||||||
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The modules antenna(s) must be installed and operated so as to meet the RF exposure compliance separation distance of 20 cm, must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. Device is approved with antenna configurations described in this filing. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4 and 66; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; and LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13 and 14. | ||||||
| Is there an equipment authorization waiver associated with this application? | No | |||||
| If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | |||||
| Test Firm Name and Contact Information | ||||||
| Firm Name |
SPORTON International Inc.
|
|||||
|
Sporton International Inc.
|
||||||
| Name |
A****** C********
|
|||||
| Telephone Number |
+886-******** Extension:
|
|||||
|
886-3******** Extension:
|
||||||
|
88633********
|
||||||
| Fax Number |
+886-********
|
|||||
|
886-3********
|
||||||
|
+886-********
|
||||||
|
a******@sporton.com.tw
|
||||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 1 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 1 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 1 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 1 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 1 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 1 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 1 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 1 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 1 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 1 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 1 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 1 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 1 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 1 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 1 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 1 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 2 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 2 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 3 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 4 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 4 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 4 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 4 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 4 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 4 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 4 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 4 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 4 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 4 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 4 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 4 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 4 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 4 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 4 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 4 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 4 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 5 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 6 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 6 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 6 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 6 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 6 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 6 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 6 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 6 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 6 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 6 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 6 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 6 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 6 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 6 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 6 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 6 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 6 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 7 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 7 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 8 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 9 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 9 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 10 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 10 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 10 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 10 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 10 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 10 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 10 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 10 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 10 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 10 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 10 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 10 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 10 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 10 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 10 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 10 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 10 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 11 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 12 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 12 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 13 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 13 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 13 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 13 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 13 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 13 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 13 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 13 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 13 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 13 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 13 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 13 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 13 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 13 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 13 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 13 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 13 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 14 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 15 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 15 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 16 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 16 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 16 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 16 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 16 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 16 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 16 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 16 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 16 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 16 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 16 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 16 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 16 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 16 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 16 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 16 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 16 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 17 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 17 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 18 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 19 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 19 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 20 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 20 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 20 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 20 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 20 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 20 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 20 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 20 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 20 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 20 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 20 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 20 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 20 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 20 | 14 | 9 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 20 | 15 | 9 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 20 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 20 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 21 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 22 | 1 | 15B | 869 | 894 | |||||||||||||||||||||||||||||||||||||
| 22 | 2 | 15B | 729 | 768 | |||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 23 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 24 | 1 | 22H | 826.4 | 846.6 | 0.1977 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 24 | 2 | 24E | 1852.4 | 1907.6 | 0.1875 | 2.5 ppm | 4M15F9W | ||||||||||||||||||||||||||||||||||
| 24 | 3 | 27 | 1712.4 | 1752.6 | 0.1845 | 2.5 ppm | 4M16F9W | ||||||||||||||||||||||||||||||||||
| 24 | 4 | 24E | 1860 | 1900 | 0.1884 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 24 | 5 | 24E | 1860 | 1900 | 0.1607 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 24 | 6 | 27 | 1720 | 1745 | 0.1786 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 24 | 7 | 27 | 1720 | 1745 | 0.1528 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
| 24 | 8 | 22H | 829 | 844 | 0.1991 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 24 | 9 | 22H | 829 | 844 | 0.1683 | 2.5 ppm | 9M05W7D | ||||||||||||||||||||||||||||||||||
| 24 | 1 | 27 | 704 | 711 | 0.2113 | 2.5 ppm | 9M07G7D | ||||||||||||||||||||||||||||||||||
| 24 | 11 | 27 | 704 | 711 | 0.177 | 2.5 ppm | 9M09W7D | ||||||||||||||||||||||||||||||||||
| 24 | 12 | 27 | 782 | 782 | 0.1884 | 2.5 ppm | 9M01G7D | ||||||||||||||||||||||||||||||||||
| 24 | 13 | 27 | 782 | 782 | 0.1589 | 2.5 ppm | 8M99W7D | ||||||||||||||||||||||||||||||||||
| 24 | 14 | 27 | 793 | 793 | 0.1687 | 2.5 ppm | 9M03G7D | ||||||||||||||||||||||||||||||||||
| 24 | 15 | 27 | 793 | 793 | 0.1426 | 2.5 ppm | 9M07W7D | ||||||||||||||||||||||||||||||||||
| 24 | 16 | 27 | 1720 | 1770 | 0.195 | 2.5 ppm | 17M9G7D | ||||||||||||||||||||||||||||||||||
| 24 | 17 | 27 | 1720 | 1770 | 0.1656 | 2.5 ppm | 18M0W7D | ||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC