all | frequencies |
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User Manual for Foldingkey ENG (FCC,IC) rev01 | Users Manual | 655.86 KiB | February 08 2018 | |||
1 2 |
|
Internal Photo | Internal Photos | 446.84 KiB | March 21 2022 / September 17 2022 | delayed release | ||
1 2 |
|
External Photo | External Photos | 347.18 KiB | March 21 2022 / September 17 2022 | delayed release | ||
1 2 |
|
Label Location | ID Label/Location Info | 70.25 KiB | March 21 2022 | |||
1 2 |
|
Continental Automotive Systems Corporation SVI-IGRGE03 C2PC | Cover Letter(s) | 985.36 KiB | March 21 2022 | |||
1 2 |
|
FCC Applicant Declaration Using two X-tal SVI-IGRGE03 | Cover Letter(s) | 744.70 KiB | March 21 2022 | |||
1 2 |
|
FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 88.23 KiB | March 21 2022 | |||
1 2 |
|
Letter of Authorization | Cover Letter(s) | 22.58 KiB | March 21 2022 | |||
1 2 |
|
Model difference letter | Cover Letter(s) | 142.18 KiB | March 21 2022 | |||
1 2 | SCH | Schematics | March 21 2022 | confidential | ||||
1 2 |
|
Test setup photo | Test Setup Photos | 298.60 KiB | March 21 2022 / September 17 2022 | delayed release | ||
1 2 | Cover Letter(s) | February 08 2018 / March 08 2018 | ||||||
1 2 | Cover Letter(s) | February 08 2018 / March 08 2018 | ||||||
1 2 | External Photos | February 08 2018 | ||||||
1 2 | ID Label/Location Info | March 08 2018 | ||||||
1 2 | Internal Photos | February 08 2018 | ||||||
1 2 | Cover Letter(s) | February 08 2018 / March 08 2018 | ||||||
1 2 | Test Report | / March 08 2018 | ||||||
1 2 | Test Setup Photos | February 08 2018 |
1 2 | User Manual for Foldingkey ENG (FCC,IC) rev01 | Users Manual | 655.86 KiB | February 08 2018 |
Document :
User Manual for Remote Keyless Entry System Model :
Project Code :
SVI-IGRGE03 Version:
1.0 Date:
May. 31. '15 Engineering change order-No.:
Design Freeze No.:
Number of pages:
6 Filename:
CASCO Identification No. :
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung.. Contents list 1. 1.1 1.1.1 1.1.2 1.1.3 1.2 2 2.1 3 System configulation Short description of the IBU Foldingkey How to use Foldingkey Introduction of Transmitter(Foldingkey) Introduction of BCM System Overview / Block Diagram Remote Keyless Entry System operation Button operation Homologation Page 3 3 3 3 3 3 5 5 6 Editor :
KS.Kim Document name Project code Version:
1.0 Jun. 10. 2015 Identification No. : Document No. ECO / DF No. File:
Page 2 / 6
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung.. 1. System configulation 1.1 Short description of the IBU Foldingkey 1.1.1 How to use Foldingkey
- Foldingkey is Remote Keyless System.
- This unit controll door lock/unlock/trunk with wireless.
- THE Foldingkey is a device that transmits the signal when the button is Pressed. 1.1.2 Introduction of Transmitter(Foldingkey)
- Transmitter has four/ three buttons
- Transmitter use the battery
- Freqency is 433.92MHz
- Modulation type is FSK by PLL IC
- Transmitter use Rolling code algorithm 1.1.3 Introduction of BCM
- BCM use the vehicle battery
- Receiver is integrated and the freqency is 433.92MHz
- After receiving the Transmitter signal , the BCM decides which operation will be performed. (Lock, Unlock, Trunk, Panic) 1.2 System Overview / Block Diagram Technical description of alarm function:
IG BCM is designed to indicate intrusion into the vehicle by unauthorized door open. IG BCM receives CAN Signal of any door open including engine hood and trunk, and then IG BCM send CAN signal to SJB (Smart Junction Box) so that SJB can drive Alarm device such as horn and visible Lamp for 27s. When alarm state is set by Foldingkey, IG BCM check all door lock status by CAN signal. And then IG BCM enters alarm system mode and drives Security Indicator which shows alarm setting status to the operator. IG BCM provides an alarm setting locking function to prevent inadvertent setting of the alarm when KEY is inserted in the Key Hole. Editor :
KS.Kim Document name Project code Version:
1.0 Jun. 10. 2015 Identification No. : Document No. ECO / DF No. File:
Page 3 / 6
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung.. Figure 1: System Block Diagram 1. Foldingkey Lock button pushed 2. Foldingkey sends the data by radio frequency IG BCM receives the RF data and decodes it. 3. IG BCM check KEY if received ID is right ID or not. 4. IG BCM checks all door lock status by CAN signal. 5. 6. IG BCM enter Alarm System Mode 7. If IG BCM receives any door open signal, IG BCM sends CAN signal to SJB to operate horn and visible lamp. Editor :
KS.Kim Document name Project code Version:
1.0 Jun. 10. 2015 Identification No. : Document No. ECO / DF No. File:
Page 4 / 6
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung.. 2 Remote Keyless Entry System operation 2.1 Button operation Lock UNlock Hold (Trunk) You can lock, unlock, trunk and hold your vehicle with this remote transmitter. Lock
- When you push this button, all the doors will be locked.
- You can not lock any of the doors with this remote transmitter if any door is open or the key is in the fob holder. Unlock
- When you push this button, all the doors will be unlocked.
- You can not unlock any of the doors with this remote transmitter if any door is open or the key is in the fob holder. HOLD(Trunk)
- When you push this button and hold more than 1 second, the trunk will be opened. Panic
- When you push this button for about 1 second, Horn will alarm. Editor :
KS.Kim Document name Project code Version:
1.0 Jun. 10. 2015 Identification No. : Document No. ECO / DF No. File:
Page 5 / 6
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung.. 3 Homologation FCC Compliance Statement. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interferencethat may cause undesired operation. Do Not Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. IC Compliance Statement. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le present appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorisee aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est susceptible den compromettre le fonctionnement. Model: SVI-IGRGE03 FCC ID: SY5IGRGE03 IC: 8325A-IGRGE03 Editor :
KS.Kim Document name Project code Version:
1.0 Jun. 10. 2015 Identification No. : Document No. ECO / DF No. File:
Page 6 / 6
.Proprietary data, company confidential. All rights reserved.Confi titre de secret d'entreprise. Tous droits rservs.Comunicado como segredo empresarial. Reservados todos os direitos.Confidado como secreto industrial. Nos reservamos todos los derechos. .Weitergabe sowie Vervielfltigung dieser Unterlage, Ver-wertung und Mitteilung ihres Inhalts nicht gestattet, soweitnicht ausdrcklich zugestanden. Zuwiderhandlungen ver-pflichten zu Schadenersatz. Alle Rechte vorbehalten, insbe-sondere fr den Fall der Patenterteilung oder GM-Eintragung..
1 2 | Internal Photo | Internal Photos | 446.84 KiB | March 21 2022 / September 17 2022 | delayed release |
1 2 | External Photo | External Photos | 347.18 KiB | March 21 2022 / September 17 2022 | delayed release |
1 2 | Label Location | ID Label/Location Info | 70.25 KiB | March 21 2022 |
FCC/IC ID LABEL 1. FCC/IC ID label drawing Model: SVI-IGRGE03 FCC ID: SY5IGRGE03 IC: 8325A-IGRGE03 2. FCC/IC ID label location
1 2 | Continental Automotive Systems Corporation SVI-IGRGE03 C2PC | Cover Letter(s) | 985.36 KiB | March 21 2022 |
Page 1 of 23 Report No.: OT-223-RWD-025 RADIO PERFORMANCE TEST REPORT Test Report No.
: OT-223-RWD-025 Reception No.
: 2202000646 Applicant
: Continental Automotive Systems Corporation Address
: 45-29, Saeum-ro, Icheon-City, Gyeonggi-Do, Korea Manufacturer
: Continental Automotive Systems Corporation Address
: 45-29, Saeum-ro, Icheon-City, Gyeonggi-Do, Korea Type of Equipment
: Remote Keyless Entry System(Transmitter) FCC ID
: SY5IGRGE03 Model No.
: SVI-IGRGE03 Serial number
: N/A Total page of Report
: 23 pages (including this page) Date of Incoming
: February 28, 2022
: March 16, 2022 Date of issuing SUMMARY The equipment complies with the regulation; FCC PART 15 SUBPART C Section 15.209 and Section 15.231 This test report only contains the result of a single test of the sample supplied for the examination. It is not a generally valid assessment of the features of the respective products of the mass-production. Tested by
/ Su-Min You / Assistant Manager ONETECH Corp. Reviewed by Tae-Ho, Kim / General Manager ONETECH Corp. Approved by Ki-Hong, Nam / General Manager ONETECH Corp. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 2 of 23 Report No.: OT-223-RWD-025 CONTENTS
...........................................................................................................................................................................................PAGE 1. VERIFICATION OF COMPLIANCE .............................................................................................................................. 5 2. TEST SUMMARY ............................................................................................................................................................... 6 2.1 TEST ITEMS AND RESULTS .............................................................................................................................................. 6 2.2 ADDITIONS, DEVIATIONS, EXCLUSIONS FROM STANDARDS ............................................................................................ 6 2.3 RELATED SUBMITTAL(S) / GRANT(S) ............................................................................................................................. 6 2.4 PURPOSE OF THE TEST .................................................................................................................................................... 6 2.5 TEST METHODOLOGY ..................................................................................................................................................... 6 2.6 TEST FACILITY ................................................................................................................................................................ 6 3. GENERAL INFORMATION ............................................................................................................................................. 7 3.1 PRODUCT DESCRIPTION .................................................................................................................................................. 7 3.2 ALTERNATIVE TYPE(S)/MODEL(S); ALSO COVERED BY THIS TEST REPORT. ................................................................ 7 4. EUT MODIFICATIONS ..................................................................................................................................................... 8 5. SYSTEM TEST CONFIGURATION ................................................................................................................................ 8 5.1 JUSTIFICATION ................................................................................................................................................................ 8 5.2 PERIPHERAL EQUIPMENT ............................................................................................................................................... 8 5.3 MODE OF OPERATION DURING THE TEST ....................................................................................................................... 8 5.4 CONFIGURATION OF TEST SYSTEM .............................................................................................................................. 10 5.5 ANTENNA REQUIREMENT ............................................................................................................................................. 10 6. PRELIMINARY TEST ..................................................................................................................................................... 11 6.1 AC POWER LINE CONDUCTED EMISSIONS TESTS ........................................................................................................ 11 6.2 GENERAL RADIATED EMISSIONS TESTS ...................................................................................................................... 11 7. BANDWIDTH MEASUREMENT ................................................................................................................................... 12 7.1 OPERATING ENVIRONMENT .......................................................................................................................................... 12 7.2 TEST SET-UP .................................................................................................................................................................. 12 7.3 TEST DATE ..................................................................................................................................................................... 12 7.4 TEST DATA ..................................................................................................................................................................... 12 8. TRANSMISSION TIME ................................................................................................................................................... 14 8.1 OPERATING ENVIRONMENT .......................................................................................................................................... 14 8.2 TEST SET-UP .................................................................................................................................................................. 14 8.3 TEST DATE ..................................................................................................................................................................... 14 8.4 TEST DATA ..................................................................................................................................................................... 15 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 3 of 23 Report No.: OT-223-RWD-025 9. RADIATED EMISSION TEST ........................................................................................................................................ 16 9.1 REGULATION ................................................................................................................................................................. 16 9.2 TEST SET-UP .................................................................................................................................................................. 17 9.3 TEST DATE ..................................................................................................................................................................... 17 9.4 TEST DATA ..................................................................................................................................................................... 18 9.4.1 Field Strength of Fundamental ............................................................................................................................. 18 9.4.2 Spurious Emission Test & Restricted Band Test .................................................................................................. 19 10. LIST OF TEST EQUIPMENT ....................................................................................................................................... 23 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 4 of 23 Report No.: OT-223-RWD-025 Revision History Rev. No. Issue Report No. Issued Date Section Affected OT-223-RWD-025 March 16, 2022 Revisions Initial Issue (C2PC due to the added optional X-tal) All 0 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 5 of 23 Report No.: OT-223-RWD-025 1. VERIFICATION OF COMPLIANCE
: Continental Automotive Systems Corporation
: 45-29, Saeum-ro, Icheon-City, Gyeonggi-Do, Korea
: S. M. Jang / Representative Applicant Address Contact Person Telephone No. FCC ID Model Name Brand Name Serial Number Date
: 82-31-645-4864
: SY5IGRGE03
: SVI-IGRGE03
: N/A
: N/A
: March 16, 2022 EQUIPMENT CLASS E.U.T. DESCRIPTION DSC - Part 15, Security/Remote Control Transmitter Remote Keyless Entry System(Transmitter) THIS REPORT CONCERNS Class II Permissive Change (C2PC) MEASUREMENT PROCEDURES ANSI C63.10: 2020 TYPE OF EQUIPMENT TESTED Pre-Production KIND OF EQUIPMENT AUTHORIZATION REQUESTED EQUIPMENT WILL BE OPERATED UNDER FCC RULES PART(S) Certification MODIFICATIONS ON THE EQUIPMENT TO ACHIEVE COMPLIANCE None FCC PART 15 SUBPART C Section 15.209 and Section 15.231 FINAL TEST WAS CONDUCTED ON 3 m, Semi Anechoic Chamber The above equipment was tested by ONETECH Corp. for compliance with the requirement set forth in the FCC Rules and Regulations. This said equipment in the configuration described in this report, shows the maximum emission levels emanating from equipment are within the compliance requirements.
-. This Report is Class II Permissive Change (C2PC) Report due to the added X-tal. This is purpose to use both of original and new X-tal optionally, For more detail test result of original X-tal, Please refer to the report No. KR18-SRF0083-C. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 6 of 23 Report No.: OT-223-RWD-025 2. TEST SUMMARY 2.1 Test items and results SECTION TEST ITEMS 15.231(c) 15.231(a) 15.231(b) 15.209(a) 15.205 15.207 Bandwidth Measurement Transmission Time Restricted Band AC Conducted Emissions 2.2 Additions, deviations, exclusions from standards No additions, deviations or exclusions have been made from standard. 2.3 Related Submittal(s) / Grant(s) Original submittal only Field Strength of Fundamental and Spurious Emission Met the Limit / PASS Note: This test is not applicable because the EUT uses battery and its not to be connected to the public utility (AC) power line. RESULTS Met the Limit / PASS Met the Limit / PASS Met the Limit / PASS N / A (See Note) 2.4 Purpose of the test To determine whether the equipment under test fulfills the requirements of the regulation stated in section 2.1. Both conducted and radiated testing was performed according to the procedures in ANSI C63.10: 2020. Radiated testing was 2.5 Test Methodology performed at a distance of 3 m from EUT to the antenna. 2.6 Test Facility The Onetech Corp. has been designated to perform equipment testing in compliance with ISO/IEC 17025. The Electromagnetic compatibility measurement facilities are located at 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea
-. Site Filing:
-. Lab Accreditation:
VCCI (Voluntary Control Council for Interference) Registration No. R-4112/ C-14617/ G-10666 / T-1842 KOLAS (Korea Laboratory Accreditation Scheme) - Accreditation NO. KT085 ISED (Innovation, Science and Economic Development Canada) Registration No. Site# 3736A-3 FCC (Federal Communications Commission) - Accreditation No. KR0013 RRA (Radio Research Agency) Designation No. KR0013 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 7 of 23 Report No.: OT-223-RWD-025 The Continental Automotive Systems Corporation, Model: SVI-IGRGE03 (referred to as the EUT in this report) is a Transmitter that it controls locking and unlocking the door of a vehicle. Product specification information described herein was obtained from product data sheet or users manual. 3. GENERAL INFORMATION 3.1 Product Description CHASSIS TYPE TX FREQUENCY MODULATION DUTY CYCLE FACTOR ANTENNA TYPE ANTEENA GAIN RATED SUPPLY VOLTAGE LIST OF EACH OSC. OR CRY. FREQ.(FREQ.>= 1 MHz) 13.08 MHz Plastic 433.92 MHz FSK 12.83 dB (Duty Cycle : 22.83 %) Built-in on the PCB in EUT
-24.14 dBi DC 3 V from a battery 3.2 Alternative type(s)/model(s); also covered by this test report.
-. None This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 8 of 23 Report No.: OT-223-RWD-025 4. EUT MODIFICATIONS
-. None 5. SYSTEM TEST CONFIGURATION 5.1 Justification This device was configured for testing in a typical way as a normal customer is supposed to be used. During the test, the following components were installed inside of the EUT. DEVICE TYPE MANUFACTURER MODEL/PART NUMBER FCC ID MAIN BOARD N/A N/A
5.2 Peripheral equipment Defined as equipment needed for correct operation of the EUT, but not considered as tested:
Model Manufacturer Description Connected to
5.3 Mode of operation during the test Software was programmed into the EUT to maintain continuous transfer mode. The EUT was set at 433.92 MHz. To get a maximum radiated emission levels from the EUT, the EUT was moved throughout the XY, XZ, and YZ planes and the worst case is XY axis. So, the worst data was recorded in this test report. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 9 of 23 Report No.: OT-223-RWD-025 Frequency Tx On Time Tx Off Time Duty Cycle Duty Cycle Factor
(MHz) 433.92
[ ms ]
22.6
[ ms ]
76.4
22.83
[ dB ]
12.83 Note Duty Cycle : (Tx On Time / (Tx On Time + Tx Off Time)) * 100 Duty Cycle Factor : 20 * Log(1 / (Duty Cycle / 100))
-. Duty Cycle
-. Test Plot The average field strength may be found by measuring the peak pulse amplitude (in log equivalent units) and determining the duty cycle correction factor (in dB) associated with the pulse modulation as shown in Equation. (ANSI C63.10: 2020) 433.92 MHz This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) 5.4 Configuration of Test System Radiated Emission Test:
Preliminary radiated emissions test were conducted using the procedure in ANSI C63.10:
Page 10 of 23 Report No.: OT-223-RWD-025 2020 to determine the worse operating conditions. Final radiated emission tests were conducted at 3 m Semi Anechoic Chamber The turntable was rotated through 360 degrees and the EUT was tested by positioned three orthogonal planes to obtain the highest reading on the field strength meter. Once maximum reading was determined, the search antenna was raised and lowered in both vertical and horizontal polarization. 5.5 Antenna Requirement For intentional device, according to section 15.203, an intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. Antenna Construction:
The transmitter antenna of the EUT is PCB Antenna, so no consideration of replacement by the user. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) 6. PRELIMINARY TEST Page 11 of 23 Report No.: OT-223-RWD-025 6.1 AC Power line Conducted Emissions Tests
- It is not need to test this requirement, because the power of the EUT is supplied from a DC battery. 6.2 General Radiated Emissions Tests During Preliminary Test, the following operating mode was investigated. Operation Mode Transmitting Mode The Worse operating condition (Please check one only) X This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 12 of 23 Report No.: OT-223-RWD-025 7. Bandwidth Measurement 7.1 Operating environment Temperature
: 21 C Relative humidity
: 52 % R.H. 7.2 Test set-up 7.3 Test date February 28, 2022 7.4 Test data
-. Test Result
: Pass The antenna output of the EUT was connected to the spectrum analyzer. The resolution bandwidth is set to 10 kHz, and peak detection was used. The bandwidth of fundamental frequency was measured and recorded. EUT Spectrum analyzer Frequency
(MHz) 433.92 20 dB Bandwidth 99 % Bandwidth
(MHz) 0.069
(MHz) 0.069 Limit
(MHz) 1.085 Remark: See next page for measurement data. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 13 of 23 Report No.: OT-223-RWD-025 20 dB Bandwidth 99% Bandwidth This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 14 of 23 Report No.: OT-223-RWD-025 8. Transmission Time 8.1 Operating environment Temperature
: 21 C Relative humidity
: 52 % R.H. 8.2 Test set-up 8.3 Test date February 28, 2022 The antenna output of the EUT was connected to the spectrum analyzer. The resolution bandwidth is set to 100 kHz, and peak detection was used. The bandwidth of fundamental frequency was measured and recorded. EUT Spectrum analyzer This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 15 of 23 Report No.: OT-223-RWD-025 8.4 Test data
-. Test Result
: Pass
-. Test Applies
: 15.231 (a) (1) Frequency (MHz) Transmission Time (s) Limit (s) Result 433.92 0.318 5.000 Pass This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 16 of 23 Report No.: OT-223-RWD-025 9. Radiated Emission Test 9.1 Regulation According to 15.209(a), for an intentional device, the general requirement of field strength of radiated emissions from intentional radiators at a distance of 3 meters shall not exceed the following values:
Frequency [MHz]
[ V/m]
[dB V/m]
Field strength Field strength Measurement distance 0.009 ~ 0.490 0.490 ~ 1.705 1.705 ~ 30 30 ~ 88 88 ~ 216 216 ~ 960 Above 960 2 400 / F (kHz) 24 000 / F (kHz) 30
*100
*150
*200 500
29.50 40.00 43.52 46.02 53.98
*Except as provided in paragraph (g), fundamental emissions from intentional radiators operating under this Section shall not be located in the frequency bands 54 ~ 72 MHz, 76 ~ 88 MHz, 174 ~ 216 MHz or 470 ~ 806 MHz. However, operation within these frequency bands is permitted under other sections of this Part, e.g., Sections 15.231 and 15.241. According to 15.231(b), for an intentional device, the general requirement of field strength of radiated emissions from intentional radiators at a distance of 3 meters shall not exceed the following values:
Field strength of Fundamental Field strength of Spurious Emissions Frequency [MHz]
40.66 ~ 40.70 70 ~ 130 130 ~ 174 174 ~ 260 260 ~ 470 Above 470
** Linear interpolations
[ V/m]
2 250 1 250 3 750 3 750 ~ 12 500 **
12 500 1 250 ~ 3 750 **
125 ~ 375 **
[m]
300 30 30 3 3 3 3
[ V/m]
225 125 375 375 ~ 1 250 **
1 250 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 17 of 23 Report No.: OT-223-RWD-025 The radiated emissions measurements were on the 3 m semi anechoic chamber. The EUT and other support equipment were placed on a non-conductive turntable above the ground plane. The interconnecting cables from outside test site were inserted into ferrite clamps at the point where the cables reach the turntable. The frequency spectrum from 30 kHz to 1 GHz was scanned and maximum emission levels at each frequency recorded. The system was rotated 360, and the antenna was varied in the height between 1.0 m and 4.0 m in order to determine the maximum emission levels. This procedure was performed for horizontal and vertical polarization of the receiving antenna. 9.2 Test set-up 9.3 Test date February 28, 2022 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 18 of 23 Report No.: OT-223-RWD-025 9.4 Test data 9.4.1 Field Strength of Fundamental
: PASSED Result EUT Operating Condition
: TX mode Distance
: 3 m The following table shows the highest levels of radiated emissions on both polarizations of horizontal and vertical. Humidity Level
: 52 % R.H. Temperature: 21 C Limits apply to
: FCC CFG 47, PART 15, SUBPART C, SECTION 15.231(b)
: Remote Keyless Entry System(Transmitter) Frequency Reading Detector Ant. Pol. Ant. Cable Amp Duty Total Limits Margin
(MHz)
(dBV) Mode
(H/V) Factor Loss Gain Factor
(dBV/m)
(dBV/m)
(dB) 433.92 22.70 4.10 33.10 92.60 Peak 92.35 Peak
Average Average H H V V Remark : H: Horizontal, V: Vertical 86.30 100.83 14.53 12.83 73.47 80.83 7.36 86.05 100.83 14.78
12.83 73.22 80.83 7.61 Total (dBV/m) = Reading (dBV) + Ant Factor (dB) + Cable Loss (dB) Amp Gain (dB) Duty Factor (dB) Margin (dB) = Limits (dBV/m) - Total (dBV/m) This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 19 of 23 Report No.: OT-223-RWD-025 9.4.2 Spurious Emission Test & Restricted Band Test 9.4.2.1 Test data for 9 kHz to 30 MHz
-. Frequency range
: 9 kHz ~ 30 MHz
-. Measurement distance
: 3 m
-. Resolution bandwidth
: 200 Hz (from 9 kHz to 0.15 MHz), 9 kHz (from 0.15 MHz to 30 MHz) Frequency
(MHz) Reading
(dBV) Ant. Pol.
(H/V) Ant. Height (m) Angle
() Ant. Factor
(dB/m) Cable Loss Emission Level(dBV/m) Limits
(dBV/m) Margin
(dB) All emissions observed were 20 dB below the limit. This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 20 of 23 Report No.: OT-223-RWD-025 9.4.2.2 Test data for 30 MHz to 1 000 MHz
-. Resolution bandwidth
: 120 kHz
-. Frequency range
: 30 MHz ~ 1 000 MHz
-. Measurement distance
: 3 m This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 21 of 23 Report No.: OT-223-RWD-025 9.4.2.3 Test data for above 1 GHz
-. Resolution bandwidth
: 1 MHz for Peak and Average Mode
-. Video bandwidth
: 1 MHz for Peak and Average Mode
-. Frequency range
: 1 GHz ~ 5 GHz
-. Measurement distance
: 3 m
-.Operating mode
: Transmitting mode Frequency Reading Detector Ant. Pol. Ant. Cable Amp Duty Total Limits Margin
(GHz)
(dBV) Mode
(H/V) Factor Loss Gain Factor
(dBV/m)
(dBV/m)
(dB) 1 301.761), 2) 45.52 Peak 1 301.761), 2) Average 1 301.761), 2) 47.62 Peak 1 301.761), 2) Average 1 735.681) 48.60 Peak 1 735.681) Average 1 735.681) 45.27 Peak 1 735.681) Average 2 169.601) 51.76 Peak 2 169.601) Average 2 169.601) 44.43 Peak 2 169.601) Average 2 603.521) 43.51 Peak 2 603.521) Average 2 603.521) 43.51 Peak 2 603.521) Average 3 037.441) 51.71 Peak 3 037.441) Average 3 037.441) 50.39 Peak 3 037.441) Average 3 471.361) 49.31 Peak 3 471.361) Average 3 471.361) 46.15 Peak 3 471.361) Average
H H V V H H V V H H V V H H V V H H V V H H V V 25.20 7.10 46.04 26.20 8.20 45.14 28.20 9.20 45.79 29.60 11.10 46.27 30.20 11.90 45.57 30.60 12.60 45.57 31.78 74.00 42.22
12.83 18.95 54.00 35.05 33.88 74.00 40.12 12.83 21.05 54.00 32.95 37.86 80.83 42.97 12.83 25.03 60.83 35.80 34.53 80.83 46.30 12.83 21.70 60.83 39.13 43.37 80.83 37.46 12.83 30.54 60.83 30.29 36.04 80.83 44.79 12.83 23.21 60.83 37.62 37.94 80.83 42.89 12.83 25.11 60.83 35.72 37.94 80.83 42.89 12.83 25.11 60.83 35.72 48.24 80.83 32.59 12.83 35.41 60.83 25.42 46.92 80.83 33.91 12.83 34.09 60.83 26.74 46.94 80.83 33.89 12.83 34.11 60.83 26.72 43.78 80.83 37.05 12.83 30.95 60.83 29.88 This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 22 of 23 Report No.: OT-223-RWD-025 Frequency Reading Detector Ant. Pol. Ant. Cable Amp Duty Total Limits Margin
(GHz)
(dBV) Mode
(H/V) Factor Loss Gain Factor
(dBV/m)
(dBV/m)
(dB) 3 905.281), 2) 51.77 Peak 3 905.281), 2) Average 3 905.281), 2) 47.97 Peak 3 905.281), 2) Average 4 339.201), 2) 45.15 Peak 4 339.201), 2) Average 4 339.201), 2) 41.69 Peak 4 339.201), 2) Average 4 773.121), 2) 48.99 Peak 4 773.121), 2) Average 4 773.121), 2) 46.23 Peak 4 773.121), 2) Average
H H V V H H V V H H V V Remark : H: Horizontal, V: Vertical 1) : Harmonic 2) : Restricted band 31.70 13.60 45.03 32.80 14.40 45.10 33.50 15.10 45.03
12.83 12.83 12.83 12.83 12.83 12.83 52.04 39.21 48.24 35.41 47.25 34.42 43.79 30.96 52.56 39.73 49.80 36.97 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 74.00 54.00 21.96 14.79 25.76 18.59 26.75 19.58 30.21 23.04 21.44 14.27 24.20 17.03 Total (dBV/m) = Reading (dBV) + Ant Factor (dB) + Cable Loss (dB) Amp Gain (dB) Duty Factor (dB) Margin (dB) = Limits (dBV/m) - Total (dBV/m) This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0) Page 23 of 23 Report No.: OT-223-RWD-025 10. LIST OF TEST EQUIPMENT Model Number Manufacturer Description Serial Number Last Cal. (Interval) FSV40-N R/S Spectrum analyzer ESR Rohde & Schwarz HLP-2008 TDK RF Solutions EMI Test Receiver TRILOG BROADBAND ANTENNA 310N Sonoma Instrument Pre-Amplifier 101651 101470 131313 312544 Apr. 16, 2021 (1Y) Oct. 18, 2021 (1Y) Feb. 21, 2022 (2Y) Mar. 15, 2022 (1Y) GP-4303D LG Precision Co.,Ltd DC POWER SUPPLY 5071069 Jan. 03, 2022 (1Y) Com-Power Horn Antenna 10050061 Oct. 15, 2021 (1Y) PHELCOM.CO Band Reject Filter N/A Jan. 18, 2022 (1Y) SIGNAL CONDITIONING 18040081 Jul. 14, 2021 (1Y) UNIT Controller Turn Table N/A N/A N/A N/A AH-118 N/A SCU 18 CO3000 DT5000 Innco Systems Innco Systems R/S GmbH GmbH GmbH Innco Systems MA-4000XPET Antenna Master MA4000/509/37211215/L N/A FMZB 1513 Schwarzbeck Loop Antenna 1513-235 Mar 24, 2020 (2Y) This Report is not correlated with the authentication of KOLAS It should not be reproduced except in full, without the written approval of ONETECH. ONETECH Corp.: 43-14, Jinsaegol-gil, Chowol-eup, Gwangju-si, Gyeonggi-do, 12735, Korea (TEL: 82-31-799-9500, FAX: 82-31-799-9599) OTC-TRF-RF-001(0)
1 2 | FCC Applicant Declaration Using two X-tal SVI-IGRGE03 | Cover Letter(s) | 744.70 KiB | March 21 2022 |
Continental Automotive Systems Corporation TEL: (+82)-31-696-0719 FAX: (+82)-31-8023-9087 Date: March 4, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 RE: Applicant Declaration Please review the attached exhibits supporting our request for applying two types of the following 3 models of Smart Car Key. FCC ID SY5IGRGE03 SY5SKRGE03 SY5SKRGE04 Model name SVI-IGRGE03 Remote Keyless Entry System (Transmitter) SVI-SKRGE03 Remote Keyless Entry System (Transmitter) SVI-SKRGE04 Remote Keyless Entry System (Transmitter) Product Description We, Continental declares that the model stated above is applying two types of X-tal optionally. Both of X-tal is identical except model name and external shape. It is purpose to prepare if shortage of supply for X-tal. Before A2C00060541 A2C00060541 AAA2239740000 As is Should you have any questions, please contact us. Sincerely, Sung-Min Jang
/Representative
/Continental Automotive Systems Corporation
(As is X-tal) A2C00060541 data sheet C o n t i n e n t a l C o m p o n e n t S p e c i f i c a t i o n Component part number Component family Component description Package outline Operating temperature range Terminal plating Shipment Family specific information 13.08148 MHz, 10 ppm, 12 pF A2C00060541 Quartz Crystal SMD, 3.2 x 2.5 mm
-40C +85C Pb-free Tape and Reel acc. to IEC60286-3 SUPPLIERs FIELD: MANDATORY FOR THE SUPPLIER TO FILL OUT (in printed letters) Specification and Vendor Addendum accepted
with deviation(s)
without deviation(s) Supplier name Signature(s) by supplier Date / Name Ordering code Supplier component name Is a PCN planned/running list PCN numbers and date Manufacturing Plant(s)
(frontend)
(local DUNS)
(backend)
(local DUNS)
(final test)
(local DUNS) Manufacturing Technology MSL ( 3 acc. to IPC/JEDEC J- STD-020D) Designed by Michael.Link@continental-corporation.com Released by see ECDM Date 2010-04-20 PA SQM E2 Department see ECDM see ECDM Designation Quartz Crystal 13.08148 MHz, 10 ppm, 12 pF Document key A2C00060541AAA Sossenheim Current document version A Pages 1 of 5 Copyright Continental AG, 2008 i t n e m u c o d s h t f o g n i t i d e r o
d n a n o i t a n m e s s d
, n o i t c u d o r p e r
, l a t t i i i m s n a r T i s r e h t o o t f o e r e h t n o i t a c n u m m o c d n a s t n e t n o c s t i f o n o i t a z i l i t u s a l l e w s a l d e h e b l l i w s r e d n e f f O i
. d e t i b h o r p e r a n o i t a z i r o h t u a s s e r p x e t u o h t i w r o t n a r g t n e t a p y b d e t a e r c s t h g i r l l A
. s e g a m a d f o t n e m y a p r o f e b a l i l i
. d e v r e s e r e r a t n e t a p n g s e d r o l e d o m y t i l i t u a f o n o i t a r t s g e r i C o n t i n e n t a l C o m p o n e n t S p e c i f i c a t i o n Version history Previous Version Current Version A Date Author Change description 2010-04-20 Michael Link Initial version of specification 1. General Requirements The content of this document shall prevail over any deviating content in the suppliers document. This component is destined for use in an automotive application. Even without explicit contradiction no generic disclaimer shall apply to the field of application or limitation with regard to the specified functional range. This component specification in conjunction with the following documents is the Continental Corporation specification. The agreed Vendor Addendum is a part of the specification. General General Quality Agreement A2C00053611AAA Family specific CQRs A2C00052910AAAA Category Quality Requirements (CQR) for Passive Components A2C00052907AAA Qualification Requirements for Continental Automotive Manufacturing Processes A2C00052908AAAA Quality Process Requirements (EMC) A2C00052905AAAA Quality Process Requirements (PCN) 2. Specific Requirements Crystal can be used only for non safety applications Designed by Michael.Link@continental-corporation.com Released by see ECDM Date 2010-04-20 PA SQM E2 Department see ECDM see ECDM Designation Quartz Crystal 13.08148 MHz, 10 ppm, 12 pF Document key A2C00060541AAA Sossenheim Current document version A Pages 2 of 5 Copyright Continental AG, 2008 i t n e m u c o d s h t f o g n i t i d e r o
d n a n o i t a n m e s s d
, n o i t c u d o r p e r
, l a t t i i i m s n a r T i s r e h t o o t f o e r e h t n o i t a c n u m m o c d n a s t n e t n o c s t i f o n o i t a z i l i t u s a l l e w s a l d e h e b l l i w s r e d n e f f O i
. d e t i b h o r p e r a n o i t a z i r o h t u a s s e r p x e t u o h t i w r o t n a r g t n e t a p y b d e t a e r c s t h g i r l l A
. s e g a m a d f o t n e m y a p r o f e b a l i l i
. d e v r e s e r e r a t n e t a p n g s e d r o l e d o m y t i l i t u a f o n o i t a r t s g e r i C o n t i n e n t a l C o m p o n e n t S p e c i f i c a t i o n 3. Electrical characteristics and parameters (at +25C 3C ambient temperature if not specified otherwise) Nominal oscillating frequency (f0):
Oscillation mode:
Operating temperature range:
Storage temperature range:
Initial frequency tolerance (f/ f0):
Frequency stability vs. operating temperature range (f/ f0):
Ageing tolerance f/f0 after 10 years:
Operating drive level (Pd):
Insulation resistance @ 100 15V DC (Ri):
Series resonance during hysteresis DLD test (R)
(50nW ... 100W) Equivalent parameters:
Load capacitance (CL):
Shunt capacitance (C0):
Motional capacitance (C1):
Series resonance resistance (ESR):
13.08148 MHz fundamental
-40 ... +85C
-40 ... +85C 10 ppm 30 ppm 5 ppm 100 W 500 M 5 12 pF 0.1751.15 pF 0.982.53 fF 100 i t n e m u c o d s h t f o g n i t i d e r o
d n a n o i t a n m e s s d
, n o i t c u d o r p e r
, l a t t i i i m s n a r T i s r e h t o o t f o e r e h t n o i t a c n u m m o c d n a s t n e t n o c s t i f o n o i t a z i l i t u s a l l e w s a l d e h e b l l i w s r e d n e f f O i
. d e t i b h o r p e r a n o i t a z i r o h t u a s s e r p x e t u o h t i w r o t n a r g t n e t a p y b d e t a e r c s t h g i r l l A
. s e g a m a d f o t n e m y a p r o f e b a l i l i
. d e v r e s e r e r a t n e t a p n g s e d r o l e d o m y t i l i t u a f o n o i t a r t s g e r i Designed by Michael.Link@continental-corporation.com Released by see ECDM Date 2010-04-20 PA SQM E2 Department see ECDM see ECDM Designation Quartz Crystal 13.08148 MHz, 10 ppm, 12 pF Document key A2C00060541AAA Sossenheim Current document version A Pages 3 of 5 Copyright Continental AG, 2008 C o n t i n e n t a l C o m p o n e n t S p e c i f i c a t i o n 4. Dimensions [mm]
3.2 0.1
. 1 0 5 2
. 5 0
. 0 5 5 0
) 9
. 0
7
. 0
) 9
. 0
#1
#4 2
. 1 6
. 1 Cover Metal
#2
#3
(1) 1.2
(1) Base AlminaCeramics C0.3 Terminal TungstenMetarize Au Plating on Ni pre-plating) LAND PATTERN (TYPICAL) 2.2 1.4 PIN CONNECTIONTOPVIEW)
#4
#1
#3
#2
#1,#3 : Xtal
#2,#4 : GND (CONNECTION COVER) Designed by Michael.Link@continental-corporation.com Released by see ECDM Date 2010-04-20 PA SQM E2 Department see ECDM see ECDM Designation Quartz Crystal 13.08148 MHz, 10 ppm, 12 pF Document key A2C00060541AAA Sossenheim Current document version A Pages 4 of 5 Copyright Continental AG, 2008 i t n e m u c o d s h t f o g n i t i d e r o
d n a n o i t a n m e s s d
, n o i t c u d o r p e r
, l a t t i i i m s n a r T i s r e h t o o t f o e r e h t n o i t a c n u m m o c d n a s t n e t n o c s t i f o n o i t a z i l i t u s a l l e w s a l d e h e b l l i w s r e d n e f f O i
. d e t i b h o r p e r a n o i t a z i r o h t u a s s e r p x e t u o h t i w r o t n a r g t n e t a p y b d e t a e r c s t h g i r l l A
. s e g a m a d f o t n e m y a p r o f e b a l i l i
. d e v r e s e r e r a t n e t a p n g s e d r o l e d o m y t i l i t u a f o n o i t a r t s g e r i C o n t i n e n t a l C o m p o n e n t S p e c i f i c a t i o n 5. Technology Information Further technology information is mandatory, corresponding pages from AEC Q xxx / CDCQ should be delivered or if not available below questionnaire should be used and completed by the supplier. thickness:
thickness:
General supplier Terminals package outline lead frame material intermediate layer lead finish weight Quartz cut of quartz crystal geometry crystal holder system Case case material housing material sealing technique i t n e m u c o d s h t f o g n i t i d e r o
d n a n o i t a n m e s s d
, n o i t c u d o r p e r
, l a t t i i i m s n a r T i s r e h t o o t f o e r e h t n o i t a c n u m m o c d n a s t n e t n o c s t i f o n o i t a z i l i t u s a l l e w s a l d e h e b l l i w s r e d n e f f O i
. d e t i b h o r p e r a n o i t a z i r o h t u a s s e r p x e t u o h t i w r o t n a r g t n e t a p y b d e t a e r c s t h g i r l l A
. s e g a m a d f o t n e m y a p r o f e b a l i l i
. d e v r e s e r e r a t n e t a p n g s e d r o l e d o m y t i l i t u a f o n o i t a r t s g e r i Designed by Michael.Link@continental-corporation.com Released by see ECDM Date 2010-04-20 PA SQM E2 Department see ECDM see ECDM Designation Quartz Crystal 13.08148 MHz, 10 ppm, 12 pF Document key A2C00060541AAA Sossenheim Current document version A Pages 5 of 5 Copyright Continental AG, 2008
(Adding X-tal) AAA2239740000 data sheet SPECIFICATION Receipt Crystal Unit NX3225GA Customer:
Item:
Type:
Charge:
Nominal Frequency:
13.08148 MHz Customers Spec. No.:
Proposal (1) NDK Spec. No.:
EXS00A-CG*****
Revision Record NIHON DEMPA KOGYO CO., LTD. Form P-1E (2014.2.2) 1. Customers Spec. No. :
2. NDK Spec. No. : EXS00A-CG*****
3. Type : NX3225GA 4. Electrical Specifications Parameters SYM. Notes Electrical Spec. min typ max Units 1 Nominal frequency fnom 13.08148 MHz 2 Overtone order Fundamental
3 Frequency tolerance
-50
+50 ppm at -40~+85C
* Include in 15 years aging 4 Equivalent resistance 100 IEC -Network Series 5 Load capacitance CL 10
pF IEC -Network 6 Level of drive 10 200 W 7 Insulation resistance 500
M When terminal to terminal and terminal to cover were applied at DC100V 15V. 8 Operating temperature range Topr
-40 9 Storage temperature range Tstr
-40
+85
+85 C C 10 Air-tightness
3.010-9 Pa m3/s Helium leak detector 5. Examination results document Since a performance is guaranteed, an examination results document does not submit.
6.1 External dimension 6.2 Taping and reel figure 6.3 Holder marking 6.4 Reliability assurance Item 6.5 Recommendation reflow profile
: EXD14B-00388
: EXK17B-00247
: EXH11B-00027
: EXS30B-00827
: EXS30B-01025 6. Application drawing NIHON DEMPA KOGYO CO., LTD. Form P-5E 7. Notice 7.1 Order items are manufactured according to specification. As to conditions, which are not indicated in this specification and unpredictable such as applied condition and oscillation margin, please check them beforehand. 7.2 Unless we receive request for modification within 3 weeks from the issue date of this NDK specification sheet, we will supply products according to this specification. Also, if youd like to modify specification of order, which has been placed with delivery request within 3 weeks from the issue data of this specification sheet, we would like to discuss with you separately. 7.3 In no event shall the company be liable for any product failure resulting from an inappropriate handling or operation of the product beyond the scope of its guarantee. 7.4 Where any change to the process condition is made due to the change(s) in the production line, inform personnel of the specifications. 7.5 Should this specification data give rise to any disputes relating to any intellectual property rights or any other rights of a third person, the company shall not indemnify anyone for any damage. Their disclosure must not be construed as the grant of a license to use any of the intellectual property rights owned by the company. 7.6 If you intend to use products listed on this specification for applications that may result in loss of life or assets (controls relating to safety, medical equipment, aeronautical equipment, space equipment, etc.), please do not fail to advise us of your intention beforehand. 7.7 In the companys production process whatever amount of ozone depleting substances (ODS) as specified in the Montreal protocol is not used. 7.8 Information contained in this specification must not be quoted, reproduced or used for other purposes including processing either in part or in full without obtaining prior approval from the company. 7.9 Crystal units will be damaged by ultrasonic welding process due to resonance of crystal wafer itself. NDK does not recommend using ultrasonic welding. If Ultra Sonic welding used, NDK strongly recommend verifying crystal unit damage by ultrasonic weld. 8. Prohibited items Be sure to use the product under the following conditions. Otherwise, the characteristics deterioration or destruction of the product may result.
(1) Reflow soldering heat resistance Peak temperature: 265C, 10 sec Heating: 230C or higher, 40 sec Preheating: 150C to 180C, 120 sec Reflow passage times: twice
(2) Manual soldering heat resistance Pressing a soldering iron of 400C on the terminal electrode for four seconds (twice). When using a soldering iron, press its tip on the part below the sealed part, avoiding the glass-sealed part
(otherwise, the glass will melt and air-tightness may be lost) NIHON DEMPA KOGYO CO., LTD. Form P-5E Reason Add standard tolerance and change terminal C dimension to reference. A Date of Revise 19.Jan.2018 Drawn Designed Checked Date 30.Jun.2006 30.Jun.2006 30.Jun.2006 Approved 30.Jun.2006 Approved H.Kobayashi Third Angle Projection Dimension:mm Charge M.Harada Name H.Yagishita H.Yagishita K.Kubota T.Ishii NIHON DEMPA KOGYO CO., LTD. NX3225GA Dimension Drawing Title Tolerance 0.1 Drawing No. EXD14B-00388 A Scale
Rev. Form M-1
(C 0.3)0.9 max#3#4#1#2PIN CONNECTIONTOP VIEW(0.9)#3#4#1#2(1.0)(1.0)(0.9)TERMINAL #1,#3:X'tal #2,#4:No Connection1.42.21.61.2LAND PATTERN (TYPICAL)BaseAlumina CeramicsAlumina CeramicsCoverTerminalTungsten Metalize3.2 0.12.5 0.11.2 0.10.7 0.1 (Au plating on Ni pre plating Ni:plating 2 to 9 m Au:plating0.3 to 0.7 m) A Date of Revise 26 Mar. 2013 Drawn Designed Checked Date 30.Jun.2006 30.Jun.2006 30.Jun.2006 Approved 30.Jun.2006 Reason The appearance of a drawing was corrected. Approved K. Oguri Third Angle Projection Dimension:mm Charge T. Shimizu Name H.Yagishita H.Yagishita K.Kubota T.Ishii NIHON DEMPA KOGYO CO., LTD. NX3225 Series Taping and Reel Spec. Title Tolerance
Drawing No. Scale
Rev. EXK17B-00247 B Form M-1 1.75 0.14.0 0.11.0 0.10.25 0.054.0 0.11.5 040.0 0.15410P)6018013.0 0.221.0 0.82.0 0.53.5 0.12.8 0.12.0 0.05LABEL9.0+0.301.15 0.058.0 0.23.5 0.05StartEndBeginClose3000pcs-Product TapeTAPING material: Conductive PSPULL DIRECTIONReel material: Conductive PSEIAJ standard reelNX3225 Crystal Unit+0.13 max0-1.5+1011.4 1.0TOP TAPE material :polyethylene terephthalate B Date of Revise 9.Nov.2000 Drawn Designed Checked Date 3.Aug.1999 3.Aug.1999
Approved 3.Aug.1999 Approved T.Ishii Reason Change Form Third Angle Projection Dimension:mm Charge H.Yagishita Name Y.Morizumi Y.Morizumi
T.Ishii NIHON DEMPA KOGYO CO., LTD. Crystal Holder Marking Title Tolerance Drawing No. EXH11B-00027 B Scale
Rev. Form M-1 Frequency Code (SEE NOTE 1)Month Code (SEE NOTE 2)Year Code (Last One Digit)Manufacture's SymbolExample28.636363 MHz28.636NOTEMonth CodeMonth123456789101112123456789XYZ2. Month Code Table*Marking digits are not include a decimal point and dot mark.1. Frequency Code Marking Frequency is consist of five digits, first five digits of Nominal FrequencyNominal FrequencyFrequency CodeJan.Feb.Mar.Apr.May.Jun.Jul.Aug.Sep.Oct.Nov.Dec. Reliability assurance item No. Test Item Test Methods Specification Code 1 Drop 2 Shock 3 Vibration Devices are dropped from the height 75cm onto wooden block. ( more than 30mm thickness. ) Execution 3 times random drops. Devices are shocked to half sine wave (981m/s2) three mutually perpendicular axis each 3 times. Frequency Range : 10 to 55 Hz Amplitude : 1.5mm Sweep time : 1 min. Test time : 2.0 hours Reflow soldering shall be used for soldering on test fixture
(Glass fiber epoxy laminate : Thickness 1.6mm+/-0.2mm) shown below. (220~240C) Be careful to happen the heat shock. Crystal units 4 Electrode adherent strength Ditch Pressure 9.8N 30 seconds Glass fiver epoxy laminate Pre-heat temperature Pre-heat Time Peek temperature Solderind temperature Test time
: 150C
: 60~120sec.
: 2405C
: Over 215C
: 10~30 sec. Pre-heat temperature : 150 C Pre-heat time : 60 120sec. Test temperature : 260 5 C Test time : 10 sec. Max. Leave at -40C 2 C for 500 hours. Leave at +85C 2 C for 500 hours. *1 Devices are left in temperature at +60C with relative humidity of 9095% for 500 hours. Devices are left into the following temperature cycle as shown in (Figure 1) for 100 consecutive cycles. *1 5 Solderability 6 7 8 9 Resistance to soldering heat Resistance to cold Resistance to heat Humidity 10 Thermal shock A A A B C A, B A A A, D A, B
*1. Resistance to heat and Thermal shock In case of spec on High temperature exceed +85C, above test according to spec high temperature will be perform and guarantee. Specification code Specification A B C D f/f 10 ppm CI/CI 15 % or 5 make use larger value After testing unless cracking of materials view of eyes and unless break of seal. The leads shall acquire a new solder coat cover at 90% of immersed area. Insulation resistance shall be greater than 500M Reliability assurance item: EXS30B-00827A NIHON DEMPA KOGYO CO., LTD. Form M-3
-405+855251cycle30min.30min. Reliability assurance item: EXS30B-01025 NIHON DEMPA KOGYO CO., LTD. Form M-3
1 2 | FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 88.23 KiB | March 21 2022 |
Continental Automotive Systems Corporation Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 17, 2022 Subject; Request for Confidentiality FCC ID: SY5IGRGE03 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);
OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Continental Automotive Systems Corporation Signature:
Name: S. M. Jang Title: Representative
1 2 | Letter of Authorization | Cover Letter(s) | 22.58 KiB | March 21 2022 |
Letter of Authorization Remote Keyless Entry System(Transmitter) Continental Automotive Systems Corporation 45-29, Saeum-ro, Icheon-City, Gyeonggi-Do, Korea Company:
Address:
Product Name:
Model Number: SVI-IGRGE03 FCC Identifier: SY5IGRGE03 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: S. M. Jang Title: Representative Signature of applicant:
Date: March 16, 2022
1 2 | Model difference letter | Cover Letter(s) | 142.18 KiB | March 21 2022 |
Continental Automotive Systems Corporation Date: March 16, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Applicant: Continental Automotive Systems Corporation FCC ID: SY5IGRGE03 To Whom It May Concern, This is to request modification for FCC ID: SY5IGRGE03 originally granted on August 03, 2018 The change under this application is due to the added optional X-tal, This is purpose to use both of original and new X-tal optionally. It is to prepare to shortage of X-tal. Original and new X-tal information is as below. Original X-tal: A2C00060541 Added X-tal: AAA2239740000 Name: S. M. Jang Title: Representative Signature of applicant
1 2 | Test setup photo | Test Setup Photos | 298.60 KiB | March 21 2022 / September 17 2022 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2022-03-21 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Class II Permissive Change |
2 | 2018-08-03 | 433.92 ~ 433.92 | DSC - Part 15 Security/Remote Control Transmitter | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2022-03-21
|
||||
1 2 |
2018-08-03
|
|||||
1 2 | Applicant's complete, legal business name |
Continental Automotive Systems Corporation
|
||||
1 2 | FCC Registration Number (FRN) |
0020852372
|
||||
1 2 |
0012626552
|
|||||
1 2 | Physical Address |
45-29, Saeum-ro
|
||||
1 2 |
467-080
|
|||||
1 2 |
Icheon-si,Gyeonggi-Do, N/A
|
|||||
1 2 |
Icheon-si,Gyeonggi-Do, N/A 467-080
|
|||||
1 2 |
South Korea
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
c******@micomlabs.com
|
||||
1 2 |
L******@ul.com
|
|||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
app s | FCC ID | |||||
1 2 | Grantee Code |
SY5
|
||||
1 2 | Equipment Product Code |
IGRGE03
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
S****** J****
|
||||
1 2 | Title |
Representative
|
||||
1 2 | Telephone Number |
82316********
|
||||
1 2 | Fax Number |
82316********
|
||||
1 2 |
s******@continental-corporation.com
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Continental Automotive Systems Corporation
|
||||
1 2 | Physical Address |
South Korea
|
||||
1 2 |
S******@continental-corporation.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/17/2022 | ||||
1 2 | 01/30/2019 | |||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | DSC - Part 15 Security/Remote Control Transmitter | ||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Remote Keyless Entry System(Transmitter) | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 | Original Equipment | |||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
ONETECH Corp.
|
||||
1 2 |
KCTL INC
|
|||||
1 2 | Name |
K****** N****
|
||||
1 2 |
J**** B****
|
|||||
1 2 | Telephone Number |
82-31********
|
||||
1 2 |
82-70********
|
|||||
1 2 | Fax Number |
82-31********
|
||||
1 2 |
82-50********
|
|||||
1 2 |
k******@onetech.co.kr
|
|||||
1 2 |
j******@kctl.co.kr
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15.231 | 433.92000000 | 433.92000000 | |||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15.231 | 433.92000000 | 433.92000000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC